TY - CONF A1 - Schreiner, Rupert A1 - Dams, Florian A1 - Prommesberger, Christian A1 - Bornmann, Benjamin A1 - Serbun, Pavel A1 - Navitski, Aliaksandr A1 - Müller, Güntner T1 - Silicon-based integrated field emission electron sources for sensor application T2 - 24th International Vacuum Nanoelectronics Conference (IVNC), 2011 : 18 - 22 July 2011, Wuppertal, Germany N2 - We report on the design, fabrication and characterization of p-type silicon field emitter arrays for the application in compact fast switchable electron sources. Since standard silicon technology has been used to prepare the devices, they can be easily integrated with other silicon based sensors and electronic components, too. The emitter arrays consist of approx. 3×105 tips per cm2, with a tip radius less than 20 nm. By using self-aligned processes, an integrated gate electrode with a diameter of  3 μm was placed concentrically around the tips. A mesh of silicon-beams with a grating period of 100 μm and beam width of 20 μm forms the anode of the electron source. A glass wafer (thickness 300 μm) acts as spacer between anode and Si-tip cathode. Characterization of the field emission properties of the emitter arrays was performed by high resolution field emission scanning microscopy. The emitter arrays exhibit a highly stable and very homogeneous emission. A maximum stable current of 0.1 μA per tip was found. A saturation level in the voltage current characteristics, which was found at around 10 nA, supports current stabilisation and will enable optical modulation of the emission current. KW - anodes KW - cathodes KW - field emission electron microscopy KW - field emission electron sources KW - field emitter arrays KW - silicon tips KW - structured cold cathode KW - vacuum sensors Y1 - 2012 UR - https://opus4.kobv.de/opus4-oth-regensburg/frontdoor/index/index/docId/5400 UR - https://ieeexplore.ieee.org/document/6004541?arnumber=6004541 SP - 19 EP - 20 PB - IEEE CY - Piscataway, NJ ER -