Refine
Document Type
- Article (2)
Language
- English (2)
Has Fulltext
- no (2)
Keywords
- active material synthesis (1)
- battery recycling (1)
- battery slurry (1)
- electrode production (1)
- graphite (1)
- multicomponent comminution (1)
- silicon (1)
- silicon anode (1)
- solid state batteries (1)
- stirred media mill (1)
Institute
Is part of the Bibliography
- yes (2)
This study presents an approach for targeted comminution of component mixtures within a wet-operated stirred media mill. In the first step, a general understanding of the interactions between individual components on the grinding result with mixtures could be gained with basic experiments and following our former research work. In particular, a protective effect of the coarser particles on the fines could be elucidated. These findings were used to develop a process for the production of a battery slurry containing fine ground silicon particles as well as dispersed carbon black and graphite particles. By a tailored sample preparation applying a combination of particle dissolution and separation, the particle size distributions of carbon black and graphite particles were analyzed separately within the produced battery slurries. Based on the selective particle size analysis, the slurry preparation could be transferred from a complex multistage batch process using a dissolver to a stirred media mill, which was finally operated in a continuous one-passage mode. The prepared slurries were subsequently further processed to silicon-rich anodes using a pilot scale coating and drying plant. Afterward, the produced anodes were electrochemically characterized in full cells. The cell results prove a comparable electrochemical behavior of anode coatings derived from a dissolver- or mill-based slurry production process. Therefore, we could demonstrate that it is possible to integrate the mixing process for the production of multicomponent slurries into the comminution process for the preparation of individual materials upstream. Even with nearly identical starting sizes of their feed materials, the targeted particle size distributions of the single components can be reached, taking into account the different material-dependent particle strengths and sequential addition of single components to the multicomponent comminution process.
Lithium-ion batteries (LIBs) provide the largest source of electrical energy storage today. This paper covers the use of comminution processes and, thus, crushers and mills for particle breakage and dispersing, as well as classifiers for particle separation within the process chain, from the raw material to the final lithium battery cell and its recycling at end of life. First of all, the raw materials for the active material production have to be produced either by processing primary raw materials, or by recycling the spent lithium batteries. The end-of-life battery cells have to be shredded, the materials separated and then milled in order to achieve the so-called black mass, which provides a secondary material source with very valuable components. Using these materials for the synthesis of the cathode active materials, milling has to be applied in different stages. The natural graphite, increasingly used as anode material, has to be designed in mills and classifiers for achieving targeted properties. Nanosized silicon is produced by nanomilling using stirred media mills as a primary option. Conductive additives for LIBs, like carbon black, have to be dispersed in a solvent with machines like planetary mixers, extruders or stirred media mills. In the future, mechanochemical synthesis of solid electrolytes will especially require additional application of comminution processes.