TY - JOUR A1 - Kugler, Felix A1 - Fehn, Thomas A1 - Sandner, Maximilian A1 - Krcmar, Wolfgang A1 - Teipel, Ulrich T1 - Microstructural and mechanical properties of geopolymers based on brick scrap and fly ash JF - International Journal of Ceramic Engineering & Science N2 - In the present work, the influence of increasing brick scrap additions on the setting behavior and material properties of fly ash‐based geopolymers is investigated. The geopolymers produced are tested for their compressive strengths, bulk densities, and thermal conductivities, among other properties. Both the starting materials and the produced geopolymers are also investigated by infrared spectroscopy, X‐ray diffraction analysis, and scanning electron microscopy to show the relationship between the solidification behavior and the resulting material properties. The investigations show that brick scrap is very suitable as a matrix material for geopolymer production. Increasing brick scrap additions lead, among other things, to a reduction in bulk density, thermal conductivity and compressive strength. KW - geopolymers KW - mechanical properties KW - microstructure KW - waste disposal Y1 - 2022 U6 - https://doi.org/10.1002/ces2.10120 SN - 2578-3270 VL - 4 IS - 2 SP - 92 EP - 101 PB - Wiley ER - TY - JOUR A1 - Fehn, Thomas A1 - Kugler, Felix A1 - Tübke, Beatrice A1 - Schweppe, Rainer A1 - Mebert, Phillip A1 - Krcmar, Wolfgang A1 - Teipel, Ulrich T1 - Charakterisierung und Störstoffanalyse von rückgewonnenen Stoffströmen aus Wärmedämmverbundsystemen JF - Chemie Ingenieur Technik N2 - Aufgrund steigender energetischer Anforderungen ist der Anteil an verbauten Wärmedämmverbundsystemen (WDVS) in den vergangenen 50 Jahren deutlich gestiegen. Trotz der Langlebigkeit dieser Systeme fallen zunehmend WDVS‐Abfälle an, deren Nutzungsphase beendet ist. Aufgrund der komplexen Bauweise sowie einer Vielzahl an unterschiedlich verbauten Materialien der vergangenen Generationen bestehen viele Unsicherheiten und Probleme bei der sortenreinen und schadstoffarmen Aufbereitung solcher Systeme. Im Rahmen der vorliegenden Arbeit wurde ein Aufbereitungsverfahren für WDVS entwickelt. Damit gelingt eine weitestgehende Rückgewinnung verwertbarer Werkstofffraktionen. Diese wurden auf etwaige Stör‐ und Schadstoffe wie Flammschutzmittel sowie auf deren Reinheit untersucht. Y1 - 2021 U6 - https://doi.org/10.1002/cite.202000215 SN - 0009-286X VL - 93 IS - 5 SP - 771 EP - 780 PB - Wiley ER -