TY - CHAP A1 - Sowa, Frank ED - Edelmayer, Friedrich ED - Pfeisinger, Gerhard T1 - »Die Wale sind mein Leben«: Narrationen in einer japanischen Walfangstadt T2 - Ozeane. Mythen, Interaktionen und Konflikte N2 - Als im Jahr 1982 die Entscheidung in der Internationalen Walfangkommission gefallen war, den kommerziellen Walfang durch ein Moratorium ab dem Jahr 1986 auszusetzen, wurde dies als eine der größten Erfolge des Umweltschutzes gefeiert. Für die Einwohner der japanischen Walfangstadt Taiji bedeutete diese Entscheidung dagegen eine Bedrohung ihrer alltäglichen Lebenswelt, prägte doch die Walfangindustrie über Jahrzehnte das Leben der Stadt und verhalf ihr zu Wohlstand. Taiji ist eine der wenigen japanischen Küstengemeinden, die eine sehr weit in die Geschichte zurückgehende Tradition des Walfanges besitzen. Durch diese über Generationen hinweg gelebte Tradition des Walfangs entwickelte sich in Taiji eine spezifische lokale Kultur. Vor dem Hintergrund einer erheblichen Reduzierung der Walfangaktivitäten ist diese jedoch heute keineswegs als tradierte und von allen ihren Mitgliedern geteilte Kultur zu verstehen. Vielmehr – so die in diesem Beitrag vertretende Auffassung – ist sie Ausdruck einer kollektiven Identitätsstiftung von maritimer Heimat. Y1 - 2017 SN - 978-3-402-14902-7 PB - Aschendorff CY - Münster ER - TY - CHAP A1 - Walther, Christoph T1 - Zur Ausbildungssituation im Betreuten Wohnen - oder wie lernt man betreutes Wohnen? T2 - Selbstbestimmtes Wohnen. Mobile Unterstützung bei der Lebensführung N2 - Die Ausbildungssituation im betreuten Wohnen bei psychisch erkrankten Menschen: Datenlage, Berufsvielfalt, Grundkompetenzen KW - Psychiatrie KW - Teilhabe KW - Selbstbestimmung Y1 - 2017 SN - 978-3-88414-655-2 PB - Psychiatrie-Verlag CY - Köln ET - 2., vollst. überarb. Aufl. ER - TY - JOUR ED - Blum, Ralph T1 - Vorlaufforschung 2016/2017 BT - Schriftenreihe N2 - Hohe Kompetenz und starkes Potenzial: Unsere dicke Doppelausgabe zur Vorlaufforschung 2016/2017 an der Technischen Hochschule Nürnberg präsentiert 20 vielversprechende Forschungsprojekte aus unterschiedlichen Fakultäten. Die Vorlaufforschung finanziert mit rund 300.000 Euro jährlich die frühe Phase von einer sich manifestierenden Idee bis zu einer antragsreifen Forschungskonzeption. Damit unterstützt der Freistaat Bayern aus TH-Mitteln kleinere Vorprojekte, Machbarkeitsuntersuchungen oder Aufbaustudien in der entscheidenden Phase zur Entwicklung zukunftsfähiger Projekte. Das interdisziplinär zusammengesetzte Gutachtergremium fokussierte auf eine Auswahl von Forschungsthemen, die eine hohe gesellschaftspolitische, rechtliche, wirtschaftliche und technologische Relevanz bieten. 44 Kolleginnen und Kollegen aus dem Sachverständigenausschuss für Wissens- und Technologietransfer, Forschung und Entwicklung sowie allen Fach- und Forschungsrichtungen haben sich engagiert an der Auswahl der eingereichten Beiträge beteiligt. Dafür ganz herzlichen Dank! Aus den vorgestellten Vorlaufforschungsprojekten ergeben sich für die TH Nürnberg eine Reihe von direkten Ergebnissen, die deutlich machen: Die Förderung einer vielversprechenden Idee zahlt sich mehrfach aus, in Publikationen, Patentanträgen, Forschungs- und Entwicklungsanträgen sowie einer hohen Erfolgsquote in der Beantragung von Forschungsprojekten, einer Zunahme an Auftragsforschung und Dienstleistung, immer mehr Kooperationen mit Wissenschafts- und Wirtschaftspartnern, Ausgründungen … Genauso wertvoll sind auch die mittelbaren Auswirkungen erfolgreicher Vorlaufforschungsprojekte: Sie bieten die Option zur Einbindung von Bacheloranden und Masteranden, sie bereichern die Attraktivität der Lehre in den Fakultäten, sie tragen zur bundesweiten Vernetzung unserer Wissenschaftlerinnen und Wissenschaftler bei und schaffen grundlegende Voraussetzungen für die Initiierung weiterer Vorhaben. T3 - Vorlaufforschung / Schriftenreihe der Georg-Simon-Ohm-Hochschule, Nürnberg - 2016/2017 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-40832 SN - 1867-4585 PB - Ohm CY - Nürnberg ER - TY - JOUR A1 - Nobach, Kai A1 - Immel, Christoph T1 - Vom Controller zum Business-Partner bei Bosch JF - Controlling & Management Review Y1 - 2017 U6 - https://doi.org/10.1007/s12176-017-0044-0 SN - 2195-8262 VL - 61 IS - 3 SP - 78 EP - 85 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Kaiser, Markus T1 - Virtual Reality, Live-Streaming & Co.: Wie digitaler Journalismus zu mehr Authentizität beiträgt JF - INFORMATIK 2017. Lecture Notes in Informatics (LNI) N2 - Im digitalen Journalismus entstehen neue journalistische Darstellungsformen und Erzählweisen. Diese nutzen all ihre Möglichkeiten wie Multimedia-Storys, Datenjournalismus, Newsgames, Virtual sowie Augmented Reality und Chat-Bots erst allmählich aus. In diesem Beitrag wird beschrieben, wie neue Medienformate dank technischer Entwicklungen etabliert werden und wie diese zu mehr Authentizität im Journalismus beitragen können. Auch neue Endgeräte wie Datenbrillen, Medien im Auto und in Möbeln sorgen für neue Anforderungen an ein journalistisches Storytelling. KW - Multimediales Storytelling KW - Livejournalismus KW - Authentizität KW - Digitaler Journalismus KW - Fake News Y1 - 2017 UR - https://gi.de/service/publikationen/lni VL - 2017 PB - Deutsche Gesellschaft für Informatik CY - Bonn ET - 1 ER - TY - JOUR A1 - Senturk Parreidt, Tugce A1 - Schmid, Markus A1 - Hauser, Carolin T1 - Validation of a Novel Technique and Evaluation of the Surface Free Energy of Food JF - Foods N2 - Characterizing the physical properties of a surface is largely dependent on determining the contact angle exhibited by a liquid. Contact angles on the surfaces of rough and irregularly-shaped food samples are difficult to measure using a contact angle meter (goniometer). As a consequence, values for the surface energy and its components can be mismeasured. The aim of this work was to use a novel contact angle measurement method, namely the snake-based ImageJ program, to accurately measure the contact angles of rough and irregular shapes, such as food samples, and so enable more accurate calculation of the surface energy of food materials. In order to validate the novel technique, the contact angles of three different test liquids on four different smooth polymer films were measured using both the ImageJ software with the DropSnake plugin and the widely used contact angle meter. The distributions of the values obtained by the two methods were different. Therefore, the contact angles, surface energies, and polar and dispersive components of plastic films obtained using the ImageJ program and the Drop Shape Analyzer (DSA) were interpreted with the help of simple linear regression analysis. As case studies, the superficial characteristics of strawberry and endive salad epicarp were measured with the ImageJ program and the results were interpreted with the Drop Shape Analyzer equivalent according to our regression models. The data indicated that the ImageJ program can be successfully used for contact angle determination of rough and strongly hydrophobic surfaces, such as strawberry epicarp. However, for the special geometry of droplets on slightly hydrophobic surfaces, such as salad leaves, the program code interpolation part can be altered. KW - contact angle KW - surface energy KW - edible coating KW - image processing KW - drop shape analysis Y1 - 2017 U6 - https://doi.org/10.3390/foods6040031 SN - 2304-8158 VL - 6 IS - 4 PB - MDPI AG CY - Basel ER - TY - JOUR A1 - Kontes, Georgios A1 - Giannakis, Georgios A1 - Horn, Philip A1 - Steiger, Simone A1 - Rovas, Dimitrios T1 - Using Thermostats for Indoor Climate Control in Office Buildings: The Effect on Thermal Comfort JF - Energies N2 - Thermostats are widely used in temperature regulation of indoor spaces and have a direct impact on energy use and occupant thermal comfort. Existing guidelines make recommendations for properly selecting set points to reduce energy use, but there is little or no information regarding the actual achieved thermal comfort of the occupants. While dry-bulb air temperature measured at the thermostat location is sometimes a good proxy, there is less understanding of whether thermal comfort targets are actually met. In this direction, we have defined an experimental Simulation protocol involving two office buildings; the buildings have contrasting geometrical and construction characteristics, as well as different building services systems for meeting heating and cooling demands. A parametric analysis is performed for combinations of controlled variables and boundary conditions. In all cases, occupant thermal comfort is estimated using the Fanger index, as defined in ISO 7730. The results of the parametric study suggest that simple bounds on the dry-bulb air temperature are not sufficient to ensure comfort, and in many cases, more detailed considerations taking into account building characteristics, as well as the types of building heating and cooling services are required. The implication is that the calculation or estimation of detailed comfort indices, or even the use of personalised comfort models, is key towards a more human-centric approach to building design and operation. KW - thermal comfort KW - Fanger KW - building energy performance simulation KW - thermostats KW - human-centred design and operation KW - Raumtemperatur KW - Behaglichkeit KW - Klimatechnik KW - Energieeffizienz Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2465 UR - 10.3390/en10091368 N1 - Funding: 1. FP7-ICT-2011-6: Building as a Service (BaaS, #288409) 2. H2020-EeB-2015: Modelling Optimization of Energy Efficiency in Buildings for Urban Sustainability (MOEEBIUS, #680517) 3. H2020-EeB5-2015: Optimised Energy Efficient Design Platform for Refurbishment at District Level (OptEEmAL, #680676) VL - 10 IS - 9 PB - MDPI AG CY - Basel, Switzerland ER - TY - CHAP A1 - Walther, Christoph A1 - Deimel, Daniel ED - Bischkopf, Jeannette ED - Deimel, Daniel ED - Walther, Christoph ED - Zimmermann, Ralf-Bruno T1 - Theorie Klinischer Sozialarbeit in der Psychiatrie T2 - Soziale Arbeit in der Psychiatrie. Lehrbuch KW - Soziale Arbeit KW - Psychiatrie KW - Klinische Sozialarbeit Y1 - 2017 SN - 978-3-88414-623-1 PB - Psychiatrie-Verlag CY - Köln ER - TY - JOUR A1 - Füller, Johann A1 - Bilgram, Volker T1 - The moderating effect of personal features on the consequences of an enjoyable co-creation experience JF - Journal of Product & Brand Management N2 - Purpose This study aims to draw a more nuanced picture of the impact of co-creation experience shedding light on the moderating role of consumers’ personal features. Virtual co-creation is considered a viable strategy to develop consumer-centered products in the digital era. As an additional effect, this research highlighted that co-creation experiences may establish beneficial consumer–brand relationships. Design/methodology/approach Using survey data stemming from 727 consumers who virtually engaged in new product development projects, the authors test the hypotheses, applying structural equation modeling. Findings The results of this study show that consumers’ personal features such as novelty seeking and dissatisfaction with existing products moderate the impact of an enjoyable experience on aspects of the consumer–company relationship. Consumers’ dissatisfaction with current product solutions is also found to moderate the relationship between an enjoyable co-creation experience and evoked product interest as well as between product involvement and evoked product interest. The study further substantiates previous findings on the relationship-effects of co-creation and particularly highlight the potential of co-creation experiences for nurturing “imaginary” relationships with the product being co-created significantly prior to market launch. Originality/value Participants in virtual co-creation approaches are widely heterogeneous individuals ranging from customers and Facebook fans to brand community members and innovative users. The study contributes to a better understanding of how the diversity of the crowd can be handled in virtual co-creation and advances the theory of value co-creation as a new marketing paradigm. Y1 - 2017 U6 - https://doi.org/10.1108/JPBM-03-2016-1122 SN - 1061-0421 VL - 26 IS - 4 SP - 386 EP - 401 PB - Emerald ER - TY - JOUR A1 - Brunswicker, Sabine A1 - Bilgram, Volker A1 - Fueller, Johann T1 - Taming wicked civic challenges with an innovative crowd JF - Business Horizons N2 - Civic challenges such as urban mobility and energy problems offer new corporate innovation opportunities. However, such challenges are wicked and difficult to tame. They require novel solutions that account for and integrate contradictory perspectives within the local innovation ecosystem of firms, governments, and citizens. This article presents a successful civic innovation crowdsourcing project case study, in which multinational firm Bombardier encouraged a global civic crowd to co-create visionary solutions to the challenge of future mobility in crowded cities around the world. Bombardier recruited a global crowd of 900 individuals and facilitated the citizen development of more than 215 solutions of unique firm value. We explore the process and outcome of this crowdsourcing project and derive actionable design principles for a three-phased civic innovation crowdsourcing process including: (1) crowd construction, (2) crowd knowledge acquisition, and (3) crowd knowledge assimilation. This process enables the crowd to integrate members’ diverse and contradictory knowledge proactively at both the team and individual levels. Additionally, the crowd is able to balance extension of existing local solutions and exploration of path-breaking technologies and solution concepts. Y1 - 2017 U6 - https://doi.org/10.1016/j.bushor.2016.11.001 SN - 0007-6813 VL - 60 IS - 2 SP - 167 EP - 177 PB - Elsevier BV ER - TY - JOUR A1 - Bogdanski, Ralf T1 - Städte brauchen Lastenfahrräder JF - Global Investor Y1 - 2017 SN - 0951-3604 IS - 6 PB - Global Investor ER - TY - JOUR A1 - Biedermann, Till M. A1 - Chong, Tze Pei A1 - Kameier, Frank A1 - Paschereit, Christian O. T1 - Statistical–Empirical Modeling of Airfoil Noise Subjected to Leading-Edge Serrations JF - AIAA Journal Y1 - 2017 U6 - https://doi.org/10.2514/1.J055633 SN - 0001-1452 VL - 55 IS - 9 SP - 3128 EP - 3142 PB - American Institute of Aeronautics and Astronautics (AIAA) ER - TY - CHAP A1 - Werner, Ulrich ED - Werner, Ulrich T1 - Stability analysis of induction rotors supported in sleeve bearings considering electromagnetic field damping and internal material damping of the rotor T2 - Vibrations in Rotating Machinery N2 - The paper shows an analytical rotordynamic model for stability analysis of induction rotors, supported in sleeve bearings, especially considering the influence of electromagnetic field damping and internal material damping of the rotor. The model contains radial and tangential electromagnetic forces considering electromagnetic field damping, stiffness and internal material damping of the rotor structure, stiffness and damping of the support, and stiffness and damping of the oil film of the sleeve bearings. The aim is to unite all these influences in one analytical model and to derive a procedure for calculating the limit of rotor stability. KW - Induction rotors KW - Internal damping of rotor KW - Electromagnetic field damping KW - Sleeve bearings KW - Vibration stability analysis Y1 - 2016 UR - https://www.researchgate.net/publication/308208020 SN - 978-0-9572374-8-3 ER - TY - GEN A1 - Kaiser, Markus T1 - Sportjournalismus T2 - Journalistikon N2 - Sportjournalismus umfasst die Berichterstattung über Sportveranstaltungen vom Profi- bis zum Amateurbereich und ist in allen bekannten Mediengattungen zu finden. Der Sport ist eines der klassischen Ressorts einer Tageszeitung; im Fernsehen erzielen vor allem Fußballspiele (insbesondere der deutschen Fußball-Nationalmannschaft) häufig sehr hohe Einschaltquoten. Zudem gibt es in diesem Special-Interest-Bereich auch spezielle Zeitschriften wie den kicker oder die Sport Bild und Sender wie Eurosport oder Sky Sport News HD sowie reine Online-Angebote wie DAZN. KW - Sportjournalismus KW - Sportreporter KW - Profisport KW - Sportkommunikation KW - Sport Y1 - 2017 UR - https://journalistikon.de/sportjournalismus/ VL - 2017 PB - Technische Universität Dortmund CY - Dortmund ER - TY - BOOK A1 - Bischkopf, Jeannette A1 - Deimel, Daniel A1 - Zimmermann, Ralf-Bruno A1 - Walther, Christoph T1 - Soziale Arbeit in der Psychiatrie BT - Lehrbuch N2 - Mit dem Buch wird für Studierende der Sozialen Arbeit und ihre Dozentinnen und Dozenten ein Lehr- und Nachschlagewerk geschaffen, das gleichzeitig ein professionelles Selbstverständnis im Sinne der Klinischen Sozialarbeit begründet. Leitideen sind die Lebensweltorientierung und die soziale Teilhabe. KW - Psychiatrie KW - Psychiatrie KW - Sozialarbeit KW - klinische Sozialarbeit KW - Sozialpsychiatrie Y1 - 2016 SN - 978-3-88414-623-1 PB - Psychiatrie-Verlag CY - Köln ET - 1. Aufl. ER - TY - CHAP A1 - Krippner, Roland T1 - Solaranlage und Baudenkmal BT - Zur Gestaltungsaufgabe neue Energietechnik auf alte Dächer und Fassaden KW - Denkmalschutz / Denkmalpflege KW - GIST - Gebäudeintegrierte Solartechnik Y1 - 2017 SP - 187 EP - 202 PB - Springer Fachmedien / Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Giannakis, Georgios A1 - Kontes, Georgios A1 - Korolija, Ivan A1 - Rovas, Dimitrios ED - Barnaby, Charles ED - Wetter, Michael T1 - Simulation-time Reduction Techniques for a Retrofit Planning Tool T2 - Proceedings of Building Simulation 2017: 15th Conference of IBPSA N2 - The design of retrofitted energy efficient buildings is a promising option towards achieving a cost-effective improvement of the overall building sector’s energy performance. With the aim of discovering the best design for a retrofitting project in an automatic manner, a decision making (or optimization) process is usually adopted, utilizing accurate building Simulation models towards evaluating the candidate retrofitting scenarios. A major factor which affects the Overall computational time of such a process is the simulation execution time. Since high complexity and prohibitive simulation execution time are predominantly due to the full-scale, detailed simulation, in this work, the following simulation-time reduction methodologies are evaluated with respect to accuracy and computational effort in a test building: Hierarchical clustering; Koopman modes; and Meta-models. The simplified model that would be the outcome of these approaches, can be utilized by any optimization approach to discover the best retrofitting option. KW - Simulation KW - Retrofit Planning KW - Meta-models KW - Hierarchical Clustering KW - Gaussian Processes Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2516 UR - http://www.ibpsa.org/?page_id=962 SN - 978-1-7750520-0-5 SN - 2522-2708 N1 - Funding: 1. FP7-ICT-2011-6: Building as a Service (BaaS, #288409) 2. H2020-EeB5-2015: Optimised Energy Efficient Design Platform for Refurbishment at District Level (OptEEmAL, #680676) 3. H2020-EeB-2015: Modelling Optimization of Energy Efficiency in Buildings for Urban Sustainability (MOEEBIUS, #680517) ER - TY - CHAP A1 - Gleichauf, Johanna A1 - Pfitzner, Christian A1 - May, Stefan T1 - Sensor Fusion of a 2D Laser Scanner and a Thermal Camera T2 - Proceedings of the 14th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2017) - Volume 1 N2 - In order to increase the robustness of localisation and victim detection in low visibility situations it is necessary to fuse several sensors. The most common sensor used in robotics is the 2D laser scanner which delivers distance measurements. In combination with a camera the gained information can be supported by visual information about the environment. Thermal cameras are ideal for finding objects with a certain temperature, but they do not deliver distance information. The difficulty in fusing these two sensors is, that a correspondence between each distance measurement and its corresponding pixel within the thermal image needs to be found. As the laser scanner only displays one plane, this is not an intuitive task. A special triangular calibration target, covering all six degrees of freedom and being visible for both sensors, was developed. In the end the transformation between each laser scan point and its corresponding thermal image pixel is given. This allows for assigning every laser measurement within the field of view a corresponding thermal pixel. The final application will enable detection of human beings and display the distance required to reach them. KW - Sensor Fusion KW - Calibration KW - 2D Laser Scanner KW - Thermal Camera KW - Laserscanner KW - Kalibrieren KW - Infrarotkamera Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-3207 UR - 10.5220/0006397303980405 SN - 978-989-758-263-9 SP - 398 EP - 405 PB - SCITEPRESS – Science and Technology Publications, Lda. ER - TY - BOOK A1 - Feder, Anna T1 - Recht auf Trauer BT - Bestattungen aus machtkritischer Perspektive N2 - Wer ist betrauerbar? Wer wird erinnert? Die Bestattungspraxis in Deutschland ist von Machtverhältnissen, insbesondere von Klassismus und Heteronormativität, geprägt. Aktuell werden immer mehr arme Menschen in Deutschland, für die keine Angehörigen die Bestattungspflicht wahrnehmen (können), ohne Grabstein und Namen, ohne Trauerfeiern und Blumenschmuck von Gesundheits- und Ordnungsämtern bestattet. Teilweise, wie z.B. in dem Berliner Bezirk Neukölln, finden die ordnungsbehördlichen Bestattungen monatlich als Sammelbeerdigung im Minutentakt statt. Oft wurden diese Menschen schon zu Lebzeiten marginalisiert und gesellschaftlich ausgegrenzt. Francis Seeck zeigt in diesem Buch den Zusammenhang zwischen Machtverhältnissen, Ausgrenzung und Beerdigungspraktiken auf. Aber auch die eigene Geschichte der Autor*in hat ihren Platz. So geht es auch um Widerstand auf anonymen Friedhofswiesen, sei es durch Trauergäste, Aktivist*innen, Forscher*innen und Mitarbeiter*innen – ganz im Sinne von „Rest in protest!“. Y1 - 2017 SN - 978-3-96042-020-0 PB - edition assemblage CY - Münster ER - TY - CHAP A1 - Walther, Christoph ED - Bäuml, Josef ED - Behrendt, Bernd ED - Henningsen, Peter ED - Pitschel-Walz, Gabriele T1 - Psychoedukation aus pädagogischer Sicht T2 - Handbuch der Psychoedukation N2 - Da Psychoedukation (PE) entwickelt wurde, um Klienten über die jeweilige Erkrankung und Behandlung aufzuklären und damit die Therapieergebnisse zu verbessern (vgl. z.B. Bäuml, 2008), ist es auf den ersten Blick ungewöhnlich,PE aus einer pädagogischen Perspektive zu betrachten, die grundsätzlicher angelegt ist als der gängige Verweis auf die Notwendigkeit einer angemessenen Didaktik in so gut wie jedem PE-Manual. Zudem stellt sich die Frage nach dem Erkenntnisgewinn einer solchen Sichtweise für die PE in Theorie und Praxis. Um eben diese Fragestellung soll es in diesem Beitrag gehen. KW - Psychoedukation KW - Pädagogik KW - Erwachsenenbildung KW - Psychoedukation KW - Erwachsenenbildung KW - Pädagogik Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-1779 SN - 978-3-7945-3131-8 VL - 2016 SP - S. 56 EP - S. 64 PB - Schattauer CY - Stuttgart ET - 1. Aufl. ER - TY - JOUR A1 - Dernbach, Beatrice T1 - Preusse, Joachim: Bausteine systemtheoretischer PR-Theorie. Eine Erkundungsstudie BT - Köln: von Halem 2016 (= Reihe Organisationskommunikation; Bd. 2). 666 Seiten. Preis: € 41,– JF - Publizistik Y1 - 2017 U6 - https://doi.org/10.1007/s11616-016-0310-8 SN - 0033-4006 VL - 62 IS - 1 SP - 115 EP - 116 PB - Springer ER - TY - GEN A1 - Kaiser, Markus T1 - online first T2 - Journalistikon N2 - „online first“ (selten auch als „web first“ bezeichnet) beschreibt das Prinzip von Zeitungsverlagen, aktuelle Nachrichten zuerst für ihre Website aufzubereiten und dort zu veröffentlichen, bevor diese in der gedruckten Tageszeitung erscheinen. Leser werden damit über Neuigkeiten so schnell wie möglich im Internet oder über Social-Media-Kanäle informiert, statt dass Meldungen von Redaktionen zunächst zurückgehalten werden, um den Printlesern einen zeitlichen Vorzug zu gewähren. KW - online first KW - Onlinejournalismus KW - Tageszeitung KW - Verlag KW - Content-Strategie Y1 - 2017 UR - https://journalistikon.de/online-first/ VL - 2017 PB - Technische Universität Dortmund CY - Dortmund ER - TY - JOUR A1 - Bogdanski, Ralf A1 - Bayer, Marius A1 - Seidenkranz, Markus T1 - Nürnberger Mikro-Depot-Konzept in der KEP-Branche: Übertragbarkeit auf andere Städte und Integration von innovativen Same-Day-Delivery-Konzepten N2 - Das in Nürnberg erprobte Mikro-Depot-Logistikkonzept zielt auf die Übertragung auf andere Städte und auf die Ausweitung der Anwendungsfälle außerhalb der KEP-Branche ab. Das Ziel ist es dabei, universale Kenn- und Zielwerte herauszuarbeiten, die es ermöglichen, die konzeptionelle Methodik leichter auf andere Städte zu übertragen. So fokussiert das Projektteam beispielsweise darauf, Werte zu erforschen, die als Indikator dienen, ob sich ein bestimmtes Wohngebiet für die Zustellung via Lastenfahrrad eignet oder nicht. Das Mikro-Depot-Konzept stellt zusätzlich eine ideale Basis für innovative Geschäftsmodelle im Bereich der Same-Day-Delivery dar. Insbesondere dann, wenn logistische Quelle und Senke im gleichen Stadtgebiet liegen, ist die klassische Paketdienstleistung für Same-Day-Delivery ungeeignet. Dies haben Start- Ups erkannt und versuchen, Software-as-a-service Geschäftsmodelle, kombiniert mit lokalen Kurierdiensten, am Markt zu etablieren. Dabei benötigen sie zur Sendungskonsolidierung ebenfalls innerstädtische Umschlagsflächen. Hier bestehen mögliche Synergien mit dem Mikro-Depot-Konzept der KEP-Branche unter der Voraussetzung kompatibler und kooperativer Logistikkonzepte und Geschäftsmodelle. T3 - Vorlaufforschung / Schriftenreihe der Georg-Simon-Ohm-Hochschule, Nürnberg - 2016/2017 Y1 - 2017 SN - 2626-7616 SP - 134 EP - 149 PB - Ohm CY - Nürnberg ER - TY - GEN A1 - Kaiser, Markus T1 - Multimediales Storytelling T2 - Journalistikon N2 - Multimediales Storytelling beschreibt die Möglichkeit des Journalisten, im Internet innerhalb eines journalistischen Beitrags verschiedenste Medien zu nutzen und zu verbinden. Hier schöpfen Journalisten (wie zum Beispiel auch beim Datenjournalismus oder bei Newsgames, bei denen journalistische Inhalte interaktiv in Form eines einfachen Computerspiels vermittelt werden) die Möglichkeiten des digitalen Mediums aus, statt klassische Medien wie Zeitungen, Zeitschriften, Radio oder Fernsehen lediglich im Digitalen abzubilden. KW - Multimediales Storytelling KW - Onepager KW - Scrollytelling KW - Multimedia-Reportage KW - Pageflow Y1 - 2017 UR - https://journalistikon.de/multimediales-storytelling/ VL - 2017 PB - Technische Universität Dortmund CY - Dortmund ER - TY - JOUR A1 - Dernbach, Beatrice T1 - Medienethischer Kommentar zum Fall: „Methadon zur Tumortherapie“ JF - Ethik in der Medizin N2 - „Bei Berichten über medizinische Themen ist eine unangemessen sensationelle Darstellung zu vermeiden, die unbegründete Befürchtungen oder Hoffnungen beim Leser erwecken könnte. Forschungsergebnisse, die sich in einem frühen Stadium befinden, sollten nicht als abgeschlossen oder nahezu abgeschlossen dargestellt werden.“ So lautet die Ziffer 14 des deutschen Pressekodex. Dieser wurde und wird vom Deutschen Presserat (2017) formuliert und gilt als die ethische Grundlage für die journalistische Arbeit in Deutschland. Haben die Redakteure bzw. die Medien bei der Berichterstattung über das Thema Methadon in der Krebstherapie gegen diesen ethischen Grundsatz verstoßen? Y1 - 2017 U6 - https://doi.org/10.1007/s00481-017-0458-4 SN - 0935-7335 VL - 29 IS - 4 SP - 330 EP - 333 PB - Springer Science ER - TY - JOUR A1 - Werner, Ulrich ED - werner, ulrich T1 - Mathematical Multibody Model of a Soft Mounted Induction Motor Regarding Forced Vibrations Due to Dynamic Rotor Eccentricities Considering Electromagnetic Field Damping JF - JAMP-Journal of Applied Mathematics and Physics N2 - The paper presents a mathematical multibody model of a soft mounted induction motor with sleeve bearings regarding forced vibrations caused by dynamic rotor eccentricities considering electromagnetic field damping. The multibody model contains the mass of the stator, rotor, shaft journals and bearing housings, the electromagnetic forces with respect of electromagnetic field damping, stiffness and internal (rotating) damping of the rotor, different kinds of dynamic rotor eccentricity, stiffness and damping of the bearing housings and end shields, stiffness and damping of the oil film of the sleeve bearings and stiffness and damping of the foundation. With this multibody model, the bearing housing vibrations and the relative shaft vibrations in the sleeve bearings can be derived. KW - Induction motor KW - Multibody model KW - Dynamic rotor eccentricities KW - Electromagnetic field damping KW - Soft mounted Y1 - 2017 U6 - https://doi.org/10.4236/jamp.2017.52032 VL - 5 IS - 2 PB - Scientific Reseach ER - TY - CHAP A1 - Knoll, Julian A1 - Köckritz, David A1 - Groß, Rainer T1 - Markov Random Walk vs. Higher-Order Factorization Machines: A Comparison of State-of-the-Art Recommender Algorithms T2 - Communications in Computer and Information Science N2 - World-wide research on recommender systems has resulted in great, highly effective algorithms based on a large variety of different concepts. Two of these promising recommender approaches are the Markov Random Walk and (higher-order) Factorization Machines. Unfortunately, due to the substantial effort for optimizing hyperparameters, most articles that describe new recommender approaches do not compare the obtained results with other state-of-the-art approaches in the recommender domain. This paper demonstrates how different state-of-the-art recommender algorithms can be compared in a consistent manner. Furthermore, we investigate under which circumstances Factorization Machines should be preferred and in which situations Markov Random Walk is the most striking algorithm. In addition, we include the restart concept into a Markov Random Walk with an optimized walk length and show how the number of factors of each order in a higher-order Factorization Machine can be optimized. Y1 - 2017 SN - 9783319604466 U6 - https://doi.org/10.1007/978-3-319-60447-3_7 SN - 1865-0929 SP - 87 EP - 103 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Kögel, Michael A1 - Das, Apurba A1 - Marszelewski, Włodzimierz A1 - Carstensen, Dirk A1 - Lindenschmidt, Karl-Erich T1 - Machbarkeitsstudie zur Vorhersage von Eisstau auf der Oder JF - WASSERWIRTSCHAFT N2 - In dieser Studie wird die Umsetzbarkeit verschiedener Methoden zur Analyse von Eisbildung auf der Oder erläutert. Die Untersuchungen schließen Auswertungen von Sentinel-1-Satelliten-Aufnahmen, die Simulation von Eisbildung mit dem Programm RIVICE und den Abgleich der gewonnenen Daten mit einem digitalen Geländemodell (DGM) ein. Auf Basis dieser Studie soll ein neuer Leitfaden für die Prognose von Eisstauereignissen auf der Oder entwickelt werden, um notwendige Schritte zur Vermeidung von Überflutungen infolge von Eisstau einleiten zu können. T2 - Feasibility study for forecasting ice jams along the river oder Y1 - 2017 U6 - https://doi.org/10.1007/s35147-017-0045-0 SN - 0043-0978 VL - 107 IS - 5 SP - 20 EP - 28 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Fakultät BI, T1 - Jahresbericht 2016/17 T2 - Jahresbericht der Fakultät BI N2 - Jahresbericht T3 - Jahresbericht / Fakultät Bauingenieurwesen - 2016/17 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2978 VL - 2016/17 ER - TY - JOUR ED - Fakultät EFI, T1 - Jahresbericht 2012/13 T2 - Jahresbericht der Fakultät EFI N2 - Jahresbericht T3 - Jahresbericht / Fakultät Elektrotechnik, Feinwerktechnik, Informationstechnik - 2012/13 Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2156 VL - 2012/13 ER - TY - JOUR ED - Fakultät EFI, T1 - Jahresbericht 2011/12 T2 - Jahresbericht der Fakultät EFI N2 - Jahresbericht T3 - Jahresbericht / Fakultät Elektrotechnik, Feinwerktechnik, Informationstechnik - 2011/12 Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2165 VL - 2011/12 ER - TY - JOUR ED - Fakultät EFI, T1 - Jahresbericht 2010/11 T2 - Jahresbericht der Fakultät EFI N2 - Jahresbericht T3 - Jahresbericht / Fakultät Elektrotechnik, Feinwerktechnik, Informationstechnik - 2010/11 Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2179 VL - 2010/11 ER - TY - JOUR ED - Fakultät EFI, T1 - Jahresbericht 2009/10 T2 - Jahresbericht der Fakultät EFI N2 - Jahresbericht T3 - Jahresbericht / Fakultät Elektrotechnik, Feinwerktechnik, Informationstechnik - 2009/10 Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2180 VL - 2009/10 ER - TY - CHAP A1 - Sowa, Frank A1 - Staples, Ronald T1 - Institutionelle Rahmung und Praxis des Beratens und Vermittelns BT - Zur Einführung T2 - Beratung und Vermittlung im Wohlfahrtsstaat N2 - Sich beraten und vermitteln zu lassen, scheint zu den zentralen personenbezogenen sozialen Dienstleistungen in der modernen Gesellschaft zu gehören. Wohlfahrtsstaatliche Institutionen haben eigene Beratungs- und Vermittlungsinstanzen ausgebildet, die sich zumindest von jenen, die auf Märkten angeboten und nachgefragt werden, maßgeblich unterscheiden. Denn ihre Funktion ist nicht nur, den Interessen der als beratungsbedürftig identifizierten Individuen zu entsprechen und gegebenenfalls entsprechend dieser Interessen die organisationsinternen Vermittlungsverfahren zu initiieren. Sondern diese Institutionen vermitteln vor allem zwischen den individuellen Interessen der (Staats-)BürgerInnen und generalisierten Erwartungen der Solidargemeinschaft (zumeist eingebettet in Nationalstaaten). Y1 - 2017 SN - 978-3-8487-3949-3 PB - Nomos/edition sigma CY - Baden-Baden ER - TY - RPRT A1 - Bogdanski, Ralf T1 - Innovationen auf der Letzten Meile – Bewertung der Chancen für eine Nachhaltige Stadtlogistik von morgen Y1 - 2017 UR - https://bpex-ev.de/publikationen/studien.html?year=2017 PB - BPEX e.V. CY - Berlin ER - TY - CHAP A1 - Meier, Lars A1 - Sowa, Frank ED - Berding, Nina ED - Bukow, Wolf-Dietrich ED - Cudak, Karin T1 - Inklusion von Bedürftigen durch Essenstafeln? Kritische Perspektiven auf sozialräumliche Inklusion im gewandelten Wohlfahrtsstaat T2 - Die kompakte Stadt der Zukunft N2 - Lars Meier und Frank Sowa gehen in ihrem Beitrag der Frage nach, wie Essentafeln zur sozialen Inklusion von bedürftigen Bevölkerungsgruppen im Nahraum beitragen und sich zu einem sozialen Treffpunkt entwickeln können, der Begegnungen zwischen zunächst fremden und unverbundenen Gruppen ermöglicht. Nach einer Einführung in die zugrunde liegende theoretische Diskussion zu Inklusions- und Exklusionsprozessen rekapitulieren die Autoren die Entwicklung der Tafelarbeit der letzten Jahre und beschreiben, dass vor allem in städtischen Gebieten eine enorme Expansion der Ausgabestellen zu verzeichnen ist, was letztlich zu Veränderungen in den Organisationsstrukturen der Tafelarbeit führt(e). Dies hat problematische Implikationen für alle beteiligten Personen, wie die Autoren anhand von Interviewausschnitten mit ehrenamtlich Helfenden und dem Leitungspersonal von Essenstafeln in der Region Nürnberg zeigen. Die Tafelmitarbeiterinnen befinden sich in einem stetigen Spannungsverhältnis zwischen organisationsinternen Abläufen und dem praktischen Tafelbetrieb, was schließlich zu Kommunikationsschwierigkeiten untereinander führt, die letztlich die inklusionsfördernden Prozesse hemmen. Y1 - 2017 SN - 9783658187330 U6 - https://doi.org/10.1007/978-3-658-18734-7_16 SP - 331 EP - 349 PB - Springer Fachmedien CY - Wiesbaden ER - TY - JOUR A1 - Werner, Ulrich ED - werner, ulrich T1 - Influence of the Foundation on the Threshold of Stability for Rotating Machines with Roller Bearings – A Theoretical Analysis JF - JAMP-Journal of Applied Mathematics and Physics N2 - The paper presents a mathematical model for analyzing the threshold of stability for rotating machines, where the rotor is linked to the stator by roller bearings, bearing housings and end-shields and where the stator feet are mounted on a soft foundation. The internal (rotating) damping of the rotor is the only source of instability, which is considered in the paper. After the mathematical coherences of the multibody model are described, a procedure is presented for deriving the threshold of stability. Additionally, a numerical example is shown, where the threshold of stability is calculated for different boundary conditions. It could be demonstrated, that the stiffness of the foundation—even if the foundation stiffness is isotropic—can help stabilizing this kind of vibration system in the same way as orthotropic bearing stiffness or orthotropic bearing housing and end-shield stiffness for a rigid foundation. KW - Rotating machines KW - Roller bearings KW - Threshold of stability KW - Foundation influence Y1 - 2017 U6 - https://doi.org/10.4236/jamp.2017.56114 VL - 5 IS - 6 PB - Scientific Reseach ER - TY - CHAP A1 - Werner, Ulrich ED - Werner, Ulrich T1 - Influence of electromagnetic field damping on the vibration stability of soft mounted induction motors with sleeve bearings, based on a multibody model T2 - Technische Mechanik - European Journal of Engineering Mechanics : Special Issue for the 12th International Conference on Vibrations in Rotating Machines (SRIM 2017) N2 - The paper shows an analytical vibration model for stability analysis of soft mounted induction motors with sleeve bearings, especially focusing on the influence of electromagnetic field damping on the limit of vibration stability. The model is a multibody model, considering the electromagnetic influence – including the electromagnetic field damping effect –, stiffness and internal material damping of the rotor structure, stiffness and damping of the bearing housings and end shields, stiffness and damping of the foundation elements and stiffness and damping of the oil film of the sleeve bearings. The aim of the paper is to unite all these influences in a model and to derive a procedure for calculating the limit of vibration stability, with considering the electromagnetic field damping effect. Additionally, a numerical example is presented, where the influence of electromagnetic field damping on the limit of vibration stability is shown, as well as the influence of the foundation elements and of the internal damping of the rotor. The procedure and conclusions can also be adopted into finite-element analysis. KW - Induction motors KW - Multibody model KW - Stability analysis KW - Electromagnetic field damping KW - Soft mounted Y1 - 2017 U6 - https://doi.org/10.24352/UB.OVGU-2017-100 VL - 37 IS - 2/5 ER - TY - CHAP A1 - Werner, Ulrich ED - Werner, Ulrich T1 - Influence of dynamic magnetic eccentricity on sleeve bearing housing vibrations of induction motors considering electromagnetic field damping N2 - The paper shows the influence of dynamic magnetic eccentricity on the sleeve bearing housing vibrations of induction motors, considering electromagnetic field damping. The analytical model contains electromagnetic forces in respect of electromagnetic field damping, stiffness and internal (rotating) damping of the rotor, dynamic magnetic eccentricity, stiffness and damping of the support, and stiffness and damping of the oil film of the sleeve bearings. Based on an analytical rotordynamic model, a practicable method is presented, showing how to consider electromagnetic field damping, when analyzing forced vibrations caused by dynamic magnetic eccentricity, which can also be adopted in a Finite-Element-Analysis. KW - Induction motors KW - Dynamic magnetic eccentricity KW - Electromagnetic field damping KW - Sleeve bearings KW - Bearing housing vibrations Y1 - 2017 UR - https://www.researchgate.net/publication/318307655 ER - TY - CHAP A1 - Kaiser, Markus T1 - Hybride Bedrohungen oder der Kampf von Innen (Fake News) T2 - Sicherheit für Generationen. Herausforderungen der neuen Weltordnung N2 - Hybride Bedrohungen - ein Thema, das von Sicherheitspolitikern verstärkt ernst genommen wird und zum Beispiel auch die NATO beschäftigt. Die neuen hybriden, das heißt vermischten Konflikte werden nicht mehr nur mit Waffen, sondern auch durch digitale Propaganda und andere soziale Techniken geführt, um Gesellschaften zu spalten bzw. zu destabilisieren. Wie stark die hybride Bedrohung tatsächlich ist und wie stark ihre Auswirkungen maximal sein könnten, darüber kann aber nur spekuliert werden. KW - Fake News KW - Social Media KW - Desinformation KW - Hybride Bedrohung KW - Propaganda Y1 - 2017 SN - 978-3-428-15264-3 PB - Duncker & Humblot CY - Berlin ER - TY - CHAP A1 - Walther, Christoph A1 - Hoghe, Jelena T1 - Förderliche Rahmenbedingungen der Integration von Genesungsbegleitern in sozialpsychiatrischen Einrichtungen BT - Eine Übersicht empirischer Studien in Deutschland N2 - Was wissen wir über förderliche Rahmenbedingungen für den Einsatz von Genesungsbegleitern (Peer-Beratung) in sozialpsychiatrischen Einrichtungen? KW - Sozialpsychiatrie KW - Genesungsbegleitung KW - Peerberatung Y1 - 2017 ER - TY - RPRT A1 - Rüdiger, Hornfeck A1 - Lusic, Mario T1 - FlexForCFK – Entwicklung eines prozessautomatisierten, formflexiblen Werkzeugs zur Herstellung von CFK-Bauteilen N2 - Für die Fertigung von CFK-Bauteilen sind Laminierformen erforder-lich. Diese werden üblicherweise gefräst oder ebenfalls aus Lami-nataufbauten hergestellt. Dieser Fertigungsprozess ist gerade für die Einzelfertigung und im Prototypenbau sehr zeitaufwendig und kostenintensiv und die Formen müssen bei Änderungen verworfen werden. Abhilfe schaffen hier formflexible Werkzeuge, mit denen die Bauteilkontur individuell eingestellt werden kann und zudem schnell änderbar ist. Dies wurde in einem Verbundprojekt zwischen der TH Nürnberg und der HAW München entwickelt. Die Schwerpunkte der Arbeiten an der TH Nürnberg lagen in der Konzipierung der Ansteu-erelektronik und der SW-Programmierung, in der Prozessbeschreibung der Verwendung von Rapid Tooling Einsätzen für CFK-Formteile mit einem sehr steilen Formgradienten und der Konzipie-rung einer Wissensdatenbank als Entscheidungshilfe zur Beurtei-lung eines technisch-wirtschaftlichen Einsatzes des formflexiblen Werkzeuges. Die prinzipielle Machbarkeit und der Nutzen dieses Werkzeugs wurden im Projekt nachgewiesen. Auf der Basis dieser Forschungsergebnisse können Anlagenbauer ein Serienprodukt entwickeln. T3 - Sonderdruck / Schriftenreihe der Georg-Simon-Ohm-Hochschule, Nürnberg - 66 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-3225 VL - 2017 IS - 66 PB - Technische Hochschule CY - Nürnberg ER - TY - CHAP A1 - Kröner, Alexander A1 - Götzelmann, Timo T1 - Fitts’ Gesetz als programmtechnische und empirische Aufgabe für Studierende der Informatik T2 - Informatik 2017 N2 - Fitts’ Gesetz ist Gegenstand vieler Lehrveranstaltungen in der Informatik. Neben der ursprünglichen Quelle existieren mehrere Formeln für verfeinerte Approximationen des Phänomens. Dieses Paper beschreibt einen Ansatz zum Einsatz dieses Themenkomplexes für Lehrzwecke für Studierende des 3. Regelstudiensemesters. Zunächst setzen Studierende den Sachverhalt als Programmieraufgabe mit mehreren zu testenden Variablen um. Im Weiteren führen sie selbst mit einer Benutzerstudie eine Verifikation durch welche im Folgenden ausgewertet wird. Bei der gemeinsamen Diskussion werden die Ergebnisse durch verschiedene Formeln sowie empirische Grundlagen wie die Ausreiserproblematik erörtert. Durch dieses Lehrkonzept, welches über mehrere Jahrgänge verfeinert wurde, werden mehrere Themen der Mensch-Computer-Interaktion mit praktischen Tätigkeiten für die Studierenden verknüpft. Ziel dessen war, Studierende in die softwaretechnische Umsetzung, die Durchführung und Auswertung der Studie zu involvieren und ihnen damit eine ganzheitliche Sicht auf die Zusammenhänge unterschiedlicher Sachverhalte aus dem Bereich der Mensch-Computer-Interaktion zu geben. KW - Fitts’ Gesetz, Programmierung, Benutzerstudie, Evaluation, Korrelation Y1 - 2017 SN - 978-3-88579-669-5 U6 - https://doi.org/10.18420/in2017_23 SN - 1617-5468 VL - 2017 SP - 295 EP - 305 PB - Gesellschaft für Informatik CY - Bonn ER - TY - JOUR A1 - Kaiser, Markus T1 - Fake News und Social Bots im Bundestagswahlkampf BT - Die Auswirkungen sind kaum messbar JF - Politische Studien N2 - Über Fake News und Social Bots ist bei den US-Präsidentschaftswahlen heftig diskutiert worden. Auch wenn alle im Bundestag vertretenen Parteien den Einsatz von Social Bots im Bundestagswahlkampf 2017 ausgeschlossen haben, wird man im Superwahljahr bei den sozialen Netzwerken genau hinsehen müssen. Auswirkungen auf das Ergebnis der Bundestagswahl werden Fake News und Social Bots aber wohl kaum haben. KW - Bundestagswahl KW - Wahlkampf KW - Social Media KW - Social Bots KW - Medienwirkungsforschung Y1 - 2017 SN - 0032-3462 VL - 68 IS - 474 PB - Hanns-Seidel-Stiftung e. V. CY - München ER - TY - GEN A1 - Brilz, Marina T1 - Ermittlung des aktuellen Heizwärmenergiebedarfs und dessen Deckung mit Hilfe von Heizsystemen über Wärmepumpen (Projektskizze) BT - Analyse der Heizwärme und der Energiegewinnung mittels unterschiedlicher Wärmepumpentechnologien für den Raum Nürnberg N2 - Der Bereich dieser Projektarbeit bezieht sich auf Heizsysteme mittels Wärmepumpen. Mit Hilfe dieser wird die gewünschte Komponente - Wärme - erzeugt, um damit ganz Nürnberg zu versorgen. Dafür wird das Potential an Heizenergie analysiert. Ziel dieses Projektes ist es Klein- und Großanlagen gegenüberzustellen und deren Stromverbrauch zu ermitteln, um festzustellen welche Anzahl an Pumpen für die Stadt Nürnberg benötigt wird. T3 - Energiekonferenz Nürnberg vom 18. Dezember 2017 : Regenerative Selbstversorgung der Stadt Nürnberg unter Einbeziehung des Umlands - 1,1 KW - Wärmepumpe KW - Wärmebedarf KW - Verteilungsnetz Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-3609 ER - TY - RPRT A1 - Weiß, Yasmin Mei-Yee T1 - Erfolgskritische Kompetenzen im digitalen Zeitalter BT - Was sind die "Future hot skills?" N2 - Es gibt kaum eine technologische Entwicklung, die aktuell unser Leben, Denken und Arbeiten so stark verändert wie die digitale Transformation. Der Ar-beitsmarkt der Gegenwart und der Zukunft unter-liegt dadurch einem fundamentalen Wandel. Wie bei jeder großen Veränderung wird es Gewinner und Verlierer am Arbeitsmarkt geben. Zu den Ge-winnern werden diejenigen Menschen zählen, die sich genau jene Kompetenzen angeeignet haben, die von Unternehmen und Organisationen zur Um-setzung ihrer jeweiligen digitalen Strategien beson-ders benötigt werden. Jeder Qualifikationserwerb benötigt Zeit. Daher nimmt die vorliegende Studie eine vorausschauende Perspektive ein und ana-lysiert, was die „Future Hot Skills“ sind, die am Ar-beitsmarkt der Zukunft in besonderem Maße benö-tigt werden und bislang nur unzureichend verfügbar sind. Für junge Nachwuchskräfte wie auch für be-rufserfahrene Professionals soll damit ein transpa-renter Überblick geschaffen werden, mit welchen Kompetenzen sie ihren persönlichen Arbeitsmarkt-wert steigern und ihre Beschäftigungsfähigkeit im digitalen Zeitalter sichern können. Für Arbeitgeber werden diejenigen Kompetenzfelder aufgezeigt, in welche durch geeignete Rekrutierungs-, Personal-entwicklungs- und Qualifizierungsmaßnahmen in besonderem Maße investiert werden muss. T3 - Sonderdruck / Schriftenreihe der Georg-Simon-Ohm-Hochschule, Nürnberg - 67 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-3218 VL - 2017 PB - TH Nürnberg CY - Nürnberg ER - TY - CHAP A1 - Kröper, Madeleine A1 - Bilgram, Volker A1 - Wehlig, Ramona T1 - Empowering Members of a Brand Community to Gain Consumer Insights and Create New Products BT - The Case of the Vorwerk Thermomix Research Community T2 - Strategy and Communication for Innovation N2 - Online Research Communities (ORCs) have ushered marketing research into a new era and are one of the fastest growing segments in the industry. ORCs offer a selected number of consumers a closed online environment in which they interact and co-create with the company not only in “one-off” projects but over an extended period of time. The approach distinguishes itself by the flexibility and diversity of market research methodologies that can be applied. In our case study, we describe the set up, live phase, and post-processing of the Vorwerk Thermomix Research Community. Over the duration of 3 weeks, Thermomix invited customers, who are also registered users of the brand’s official online receipe community, to participate in a moderated ORC. There were two major goals. First, Thermomix wanted to understand consumers’ “cooking journeys,” i.e., learn how they decide what to cook, plan their cooking, buy groceries, etc. Second, Thermomix aimed to co-create with its customers and develop new features and functionalities for the Thermomix recipe community which serves as a central meeting place for cooking enthusiasts and brand fans. In the study, we show how the ORC was designed to answer our research questions and what methodological benefits the method yields. Furthermore, we investigate the user types that contributed to the platform most and provide insights into how to boost activity levels on the platform. In today’s social media context, ORCs are a valuable tool for brands to connect with their customers and engage them in value creating activities. This chapter sheds light on this new research approach and unveils the potential of brand community members for insight generation and co-innovation. Y1 - 2017 U6 - https://doi.org/10.1007/978-3-319-49542-2_24 PB - Springer CY - Cham ER - TY - RPRT A1 - Langenbach, Christian T1 - E-Learning an Hochschulen BT - Kritische Bestandsaufnahme, Entwicklungslinien und Perspektiven N2 - Zwei Jahrzehnte E-Learning haben die Hochschulen der viel zitierten und oft beschworenen "Bildungsrevolution" nicht entscheidend nahegebracht. Der Arbeitsbericht bietet vor dem Hintergrund dieser Erkenntnis zunächst einen historischen Abriss der Entwicklung des Themas sowie eine ordnende Bestandsaufnahme heute etablierter, wenn auch nach wie vor nicht in der Fläche verfügbarer Konzepte und Realisierungsansätze. Sodann werden die Potenziale des E-Learnings im Kontext der Hochschullehre beleuchtet, wobei neben bekannten Formaten insbesondere denkbare Entwicklungslinien diskutiert werden, in denen innovative Bausteine vordergründig lernfremder Handlungsfelder der Digitalisierung das E-Learning befruchten und zukunftsorientierte Szenarien prägen könnten. Abschließend setzt sich der Bericht mit den zentralen Problemen auseinander, die einen nachhaltigen Durchbruch des Themas E-Learning an Hochschulen bis dato verhindert haben und nach wie vor hemmen. Zusammenfassung und Ausblick erfolgen in Form von zwölf Thesen. T3 - Arbeitsberichte der Fächergruppe Organisation und Wirtschaftsinformatik / Fakultät Betriebswirtschaft - 1 KW - E-Learning KW - Integriertes Lernen KW - E-Learning KW - Blended Learning Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2486 VL - 2017 IS - 1 ER - TY - JOUR A1 - Bilgram, Volker A1 - Gluth, Oliver A1 - Piller, Frank T1 - Crowdfunding Data as a Source of Innovation JF - Marketing Review St. Gallen N2 - In the digital era, crowdfunding platforms serve as a litmus test for the desirability and viability of thousands of innovative ideas. Based on consumers' actual purchasing behavior, crowdfunding data promises to reveal future hot topics and technologies. This study shows how companies can identify innovation opportunities from crowdfunding data by applying machine learning techniques. Y1 - 2017 VL - 34 IS - 3 PB - Thexis Verlag, St. Gallen ER - TY - GEN A1 - Kaiser, Markus T1 - Crossmedia T2 - Journalistikon N2 - Crossmedia bezeichnet die Strategie einer Redaktion, ihre redaktionellen Inhalte über die verschiedenen vorhandenen Plattformen auszuspielen, miteinander zu verknüpfen und jeweils auf das weiterführende Angebot hinzuweisen. Dabei steht der jeweilige Mehrwert für die Nutzer im Vordergrund und nicht das Ausspielen derselben Inhalte über verschiedene Kanäle. KW - Crossmedia KW - Onlinejournalismus KW - Medienkonvergenz KW - Ausspielkanäle KW - Content Y1 - 2017 UR - https://journalistikon.de/crossmedia/ VL - 2017 PB - Technische Universität Dortmund CY - Dortmund ER - TY - CHAP A1 - Schkutow, Andreas A1 - Frick, Thomas T1 - Control of temperature fields and melt formation in laser transmission welding using adapted laser wavelengths T2 - Proceedings of LiM 2017 N2 - The usage of laser transmission welding of polymers as a joining technique in industrial applications is often limited by the optical properties of the joining partners and the limited gap-bridging capability. By using alternative laser wavelengths or multiple beam sources it is possible to adjust the radiation to the properties of the materials and increase the weld seam quality. Especially for scattering materials, parts without specific laser absorbing additives and in applications where relatively large gaps occur due to manufacturing tolerances of the parts, adapted wavelengths can lead to improved results. In this work, the gap bridging during quasi-simultaneous laser transmission welding is investigated in welding experiments and thermomechanical FE-simulations. Usage of a laser wavelength in the range of 2.0 μm is found to be beneficial in terms of gap-bridging, compared to usually applied diode or solid state lasers emitting at about 1 μm due to the higher intrinsic absorption in unmodified thermoplastic materials. This leads to increased temperatures in the transparent joining partner and therefore greater thermal expansion. Furthermore the radiation shows an increased penetration depth in carbon black filled, laser absorbing materials, also leading to increased thermal expansion and improved gap bridging. The wavelength of 2.0 μm is also found to improve the strength of weld seams when turbid materials or materials with scattering additives are used as laser transparent parts, since scattering at small particles is strongly wavelength dependent, so the longer wavelength features better control of the resulting intensity distribution in the joining zone. KW - laser transmission welding; adapted wavelength; melt pool geometry; gap bridging Y1 - 2017 UR - https://wlt.de/lim/Proceedings2017/Data/PDF/Contribution72_final.pdf PB - Wissenschaftliche Gesellschaft Lasertechnik e.V. ER - TY - CHAP A1 - Gottwald, Markus A1 - Sowa, Frank A1 - Staples, Ronald T1 - Bürokratie und Ethnografie BT - Innovative Arbeitsverwaltungsforschung und ihr context of discovery. Eine Methodenreflexion T2 - Beratung und Vermittlung im Wohlfahrtsstaat N2 - Mit dem seit dem 1. Juli 2014 laufenden Projekt "Vermittlerhandeln im weiterentwickelten Zielsystem der BA. Veränderungen, Probleme und Erfolge in der Praxis. Eine organisationsethnografische Studie" hat sich das Institut für Arbeitsmarkt und Berufsforschung (IAB) erstmals auf die ethnografische Herangehensweise eingelassen. Das Projekt geht auf eine Anfrage der Selbstverwaltung in der Bundesagentur für Arbeit (BA) zurück, die mehr über die Wirkungsweise der im Haus aufgebauten Strukturen organisationaler Selbststeuerung in Erfahrung bringen will, um daraus Schlüsse für mögliche Verbesserungen zu ziehen. Der vorliegende Beitrag stellt das Projekt genauer vor, wird dies jedoch in Form einer Methodenreflexion tun: Einerseits streicht er die Innovativität des Forschungsdesigns heraus, andererseits wendet er sich einer methodologischen Herausforderung zu, die zur Reflexion zwingt: Der Projektträger, das IAB, ist eine besondere Dienststelle der BA. Damit sind die EthnografInnen von Anbeginn und auf strukturell unhintergehbare Weise mit ihrem Beobachtungsgegenstand verstrickt, sie sind qua Mitgliedschaft Teil des zu beforschenden Feldes. Für die Projektumsetzung hat dies Vorteile, birgt aber ebenso Fallstricke. Die zentrale Tücke besteht darin, so die These, ein bürokratiebedingtes Othering zu vollziehen. Y1 - 2017 U6 - https://doi.org/10.5771/9783845282732-92 PB - Nomos/edition sigma CY - Baden-Baden ER - TY - BOOK A1 - Krippner, Roland T1 - Building Integrated Solar Technology BT - Architectural design with photovoltaics and solar thermal Y1 - 2017 SN - 978-3-95553-362-5 PB - DETAIL Business Information GmbH CY - Munich ER - TY - JOUR A1 - Paul, Claudia T1 - BTHG: Die Definition der außergewöhnlichen Gehbehinderung im Sozialgesetzbuch IX und die Inanspruchnahme des EU-einheitlichen Parkausweises für behinderte Menschen Y1 - 2017 UR - https://www.reha-recht.de/fachbeitraege/beitrag/artikel/beitrag-c2-2017 ER - TY - JOUR ED - Pöhlau, Frank T1 - Best of efi 2016/17 N2 - Best of efi 2016/17 ist der Jahresbericht der Fakultät Elektrotechnik Feinwerktechnik Informationstechnik. T3 - Jahresbericht / Fakultät Elektrotechnik, Feinwerktechnik, Informationstechnik - 2016/17 Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2325 ER - TY - JOUR ED - Fakultät EFI, T1 - Best of efi 2015/16 N2 - Jahresbericht T3 - Jahresbericht / Fakultät Elektrotechnik, Feinwerktechnik, Informationstechnik - 2015/16 Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2102 VL - 2015/16 ER - TY - JOUR ED - Fakultät EFI, T1 - Best of efi 2014/15 N2 - Jahresbericht T3 - Jahresbericht / Fakultät Elektrotechnik, Feinwerktechnik, Informationstechnik - 2014/15 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2091 ER - TY - JOUR ED - Fakultät EFI, T1 - Best of efi 2013/14 T2 - Jahresbericht der Fakultät EFI N2 - Jahresbericht T3 - Jahresbericht / Fakultät Elektrotechnik, Feinwerktechnik, Informationstechnik - 2013/14 Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2147 VL - 2013/14 ER - TY - CHAP A1 - Kupka, Peter A1 - Sowa, Frank A1 - Theuer, Stefan ED - Möller, Joachim ED - Walwei, Ulrich T1 - Beratung und Vermittlung T2 - Arbeitsmarkt kompakt: Analysen, Daten, Fakten (IAB-Bibliothek ; Bd. 363) Y1 - 2017 SN - 978-3-7639-4113-1 U6 - https://doi.org/10.3278/300936w142 PB - Bielefeld CY - Bertelsmann Verl. ER - TY - JOUR A1 - Neukamm, Kai A1 - Walther, Christoph T1 - Auswirkungen des Mindestlohns auf Integrationsunternehmen JF - Psychosoziale Umschau N2 - Wie wirkt sich das Mindestlohngesetz auf die Integrationsunternehmen aus und wie reagieren diese darauf. KW - Mindestlohn KW - Werkstatt für Behinderte KW - Mindestlohn KW - Integrationsunternehmen KW - Zuverdienst Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-1801 VL - 31 (2016) IS - 3 SP - 34 EP - 35 PB - Psychiatrie-Verlag CY - Köln ER - TY - GEN A1 - Kaiser, Markus T1 - Augmented Reality T2 - Journalistikon N2 - Unter Augmented Reality (AR) versteht man die erweiterte Realität: Man sieht die reale Umgebung und bekommt auf dem Display eines Smartphones oder Tablets bzw. auf einer Datenbrille digitale Inhalte zusätzlich eingeblendet. Eine Vision ist, dass sich diese Inhalte künftig auch mittels einer Kontaktlinse mit der Wirklichkeit vermischen. KW - Augmented Reality KW - XR KW - virtuelle Welt KW - Extended Reality KW - Datenbrille Y1 - 2017 UR - https://journalistikon.de/augmented-reality/ VL - 2017 PB - Technische Universität Dortmund CY - Dortmund ER - TY - JOUR A1 - Thielmann, Julian A1 - Kohnen, Stephane A1 - Hauser, Carolin T1 - Antimicrobial activity of Olea europaea Linné extracts and their applicability as natural food preservative agents JF - International Journal of Food Microbiology N2 - The antimicrobial activity of phenolic compounds from Olea (O.) europaea Linné (L.) is part of the scientific discussion regarding the use of natural plant extracts as alternative food preservative agents. Although, the basic knowledge on the antimicrobial potential of certain molecules such as oleuropein, hydroxytyrosol or elenolic acid derivatives is given, there is still little information regarding their applicability for food preservation. This might be primarily due to the lack of information regarding the full antimicrobial spectrum of the compounds, their synergisms in natural or artificial combinations and their interaction with food ingredients. The present review accumulates available literature from the past 40 years, investigating the antimicrobial activity of O. europaea L. derived extracts and compounds in vitro and in food matrices, in order to evaluate their food applicability. In summary, defined extracts from olive fruit or leaves, containing the strongest antimicrobial compounds hydroxytyrosol, oleacein or oleacanthal in considerable concentrations, appear to be suitable for food preservation. Nonetheless there is still need for consequent research on the compounds activity in food matrices, their effect on the natural microbiota of certain foods and their influence on the sensorial properties of the targeted products. KW - Antimicrobial susceptibility KW - elenolic acid KW - food preservation KW - hydroxytyrosol KW - olea europaea KW - oleuropein Y1 - 2017 U6 - https://doi.org/10.1016/j.ijfoodmicro.2017.03.019 SN - 0168-1605 VL - 251 SP - 48 EP - 66 PB - Elsevier BV CY - Amsterdam ER - TY - GEN A1 - Friedrich, Stefanie A1 - Grombach, Daniel A1 - Kirschner, Sebastian A1 - Kruczek, Alexander A1 - Laur, Fenja A1 - Semmelroth, Ronja A1 - Schinnagel, Katharina A1 - Vasel, Julian A1 - Wegner, Moritz T1 - Analytic success stories BT - cross-industry search ; Fallstudienseminar SS 2017 N2 - The aim of the case study seminar was to identify analytic solutions and evaluate and compare them regarding multiple attributes. Different providers of analytic solutions from Gartner's BI quadrant were selected and more than 30 success stories are detailed in the appendix. The document has been solely created by the students of the course. Each analytic success story is characterized by the following attributes: - the actual analytical problem of the company - the goal for the analytical solution - the approach to realize the analytical solution - the technological basis for the solution - the project results with their respective benefits KW - Business Intelligence KW - Analytics KW - Big Data KW - Massendaten KW - Business Intelligence KW - Datenanalyse Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-2371 ER - TY - JOUR A1 - Werner, Ulrich ED - werner, ulrich T1 - Analysis of active vibration reduction for soft mounted electrical machines based on a multibody model JF - International Journal of Applied Mechanics N2 - The aim of the paper is to analyze active vibration reduction of soft mounted electrical machines by using actuators between the motor feet and a soft foundation based on a multibody model. The actuator forces are inserted directly in the vibration model without using a feedback control system. The goal is to reduce the forced vibrations, which are caused by typical excitations of electrical motors — eccentricity of rotor mass, bent rotor deflection and magnetic eccentricity. Based on the simplified model, the mathematical coherences are derived and a numerical example is shown, where different vibration reduction concepts are analyzed and the necessary actuator forces are calculated. The aim of the paper is to show the capability of using actuators between motor feet and soft foundation, based on a simplified multibody vibration model. For future work, the multibody model has to be implemented into a feedback control system for active vibration control. KW - Electrical machines KW - Active vibration reduction KW - Multibody model KW - Soft mounted Y1 - 2017 U6 - https://doi.org/10.1142/S175882511650085X VL - 8 IS - 8 PB - World Scientific ER - TY - CHAP A1 - Ruccius, Benjamin A1 - Preller, Bastian A1 - Marz, Martin A1 - Wagner, Bernhard T1 - An advanced control concept for modular multilevel converter using capacitor voltage estimation T2 - 2017 IEEE Southern Power Electronics Conference (SPEC) N2 - An advanced control concept for a Modular Multilevel Converter (MMC) is presented in this paper. By using a Notch Filter and a Kalman Filter it is possible to reduce unwanted AC components within circulating currents in the MMC significantly. Subsequently the current stress and the conduction and switching losses in the semiconductors can be minimized. In the second part of this paper, approaches to estimate the capacitor voltages are presented. The observability is inverstigated theoretically and via simulations. A disadvantage of the MMC topology is the need of a complex and expensive communication system. While the submodule voltages are being estimated, the communication effort between the submodules and the main controller hardware is significantly reduced. KW - Control theory , DC-AC Power Converters , Kalman Filter , Modular Multilevel Converter , Notch Filter Y1 - 2018 U6 - https://doi.org/10.1109/SPEC.2017.8333590 PB - IEEE ER - TY - JOUR A1 - Oljaca, Jelena A1 - Walther, Christoph T1 - Ambulante Psychoedukation bei psychischer Erkrankung nach SGB XII BT - Eine Befragung in der Stadt Nürnberg JF - Sozialpsychiatrische Informationen N2 - Psychoedukation (PE) wird in Deutschland vor allem in psychiatrischen Kliniken angeboten. In der Diskussion um Vorteile und typische Hindernisse bei der Etablierung ambulanter PE-Gruppen, wird aus Sicht der Autoren die Unterscheidung zwischen SGB V- und SGB XII-finanzierten Einrichtungen im ambulanten Sektor vernachlässigt. Mit einer Befragung aller ambulanten SGB XII-Einrichtungen in der Stadt Nürnberg sollte beispielhaft an einer Region erfasst werden, wer in welchem Kontext PE-Gruppen anbietet. Im Ergebnis überrascht deren Häufigkeit. Es lohnt sich, die Potenziale für ambulante PE-Gruppen in den SGB XII-Einrichtungen in Fachwelt und Praxis deutlich stärker in den Blick zu nehmen, zu thematisieren und auch tatsächlich auszuschöpfen. Deutlich wird auch, dass die Möglichkeiten einer Kooperation der Einrichtungen untereinander nicht ausgeschöpft werden. KW - Psychoedukation KW - Psychoedukation KW - ambulant KW - Einrichtungen nach SGB XII KW - Deutschland: Sozialgesetzbuch 12 KW - Ambulante psychiatrische Versorgung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-1790 VL - 46 (2016) IS - 3 SP - 24 EP - 27 PB - Psychiatrie-Verlag CY - Köln ER - TY - CHAP A1 - Schneider, Georg A1 - Kalantari, Yashar A1 - Kontes, Georgios A1 - Grün, Gunnar A1 - Steiger, Simone T1 - A Platform for Automated Technical Building Management Services Using Ontology T2 - Lean and Computing in Construction Congress (LC3) 2017: Volume I – Proceedings of the Joint Conference on Computing in Construction (JC3), July 4-7, 2017, Heraklion, Crete, Greece N2 - The deployment of technical building management services is a requirement to further reduce energy demand of future and existing buildings. Automating the process of configuring and deploying technical building management services such as fault detection and diagnosis of technical Equipment seems to be a promising path to intensify the adoption of these services. In this work we present a data processing and analytics execution platform which allows the deployment of ontology-based, automated technical building Management services on a large-scale. We present the platform architecture and results from a reference implementation performing rule-based fault detection on offline air handling unit data. KW - Technical Building Management KW - Service-Oriented Architecture SOA KW - Fault Detection and Diagnosis KW - Ontology KW - Gebäudeleittechnik KW - Energieeffizienz Y1 - 2017 UR - 10.24928/JC3-2017/0279 SN - 978-0-9565951-6-4 N1 - Funding: 1. H2020-EeB-2015: Modelling Optimization of Energy Efficiency in Buildings for Urban Sustainability (MOEEBIUS, #680517) PB - Heriot-Watt University CY - Edinburgh, UK ER - TY - CHAP A1 - Raab, Bastian A1 - Pöllmann, Herbert T1 - 3. Synthesis of highly reactive pure cement phases T2 - Cementitious Materials N2 - Pure phases of ordinary Portland cements (OPC), belite cements, and cal-cium aluminate cements (CAC) are often synthesized to understand the formation ofthe phases during the sintering process and to investigate their hydration behaviorin simplified conditions. Due to the need to reduce CO2emissions in cement produc-tion, the usage of by-products from other industries with a better homogenization ofthe chemical components is often discussed. In addition to the traditional solid statereaction, other low temperature synthesis methods such as self-propagating combus-tion synthesis, sol gel synthesis, and polymeric precursor processes (Pechini process)were used to understand phase formation by using better homogenized raw materials.By using these synthesis routes, cement phases with a much higher specific surfacearea and reactivity can also be achieved. The hydration process, which starts on thesurface area of the particles, can be much better characterized using these kinds ofsynthesis methods. The target of this chapter is therefore to describe different synthe-sis methods for pure cement phases and the phase formation of the phases obtainedby different synthesis routes. KW - synthesis, cement phase, Portland cement, calcium aluminate cement,nano, sol-gel, polymer precursor process, GNP Y1 - 2017 SN - 978-3-11-047373-5 U6 - https://doi.org/10.1515/9783110473728-004 SP - 61 EP - 102 PB - De Gruyter ER -