TY - JOUR A1 - Reichenberger, Marcus A1 - Bartz, Marcel A1 - Häußler, Felix A1 - Halmos, Fabian A1 - Ankenbrand, Markus A1 - Jüttner, Michael T1 - Use of Printed Sensors to Measure Strain in Rolling Bearings under Isolated Boundary Conditions JF - Lubricants : special issue : Behavior of Lubricated Bearings in Electric Circuits N2 - The knowledge of the operating conditions in rolling bearings in technical applications offers many advantages, for example, to ensure a safe operation and to save resources and costs with the help of condition monitoring and predictive maintenance procedures. In many cases, it is difficult to implement sensors to measure the operating conditions of the rolling bearing, for reasons such as inaccessibility of the mounting position or non-compliance with installation space neutrality, which influences the sensor on the measuring point. Printed sensors using a digital deposition process, which can be used in very narrow design spaces, offer advantages in this respect. So far, these sensors have not been established in rolling bearings, so there is potential for technical application. This paper discusses the fundamental advantages and disadvantages as well as the challenges of the application, and it demonstrates the feasibility under isolated boundary conditions by applying a printed strain gauge sensor to the outer ring of a cylindrical roller bearing NU210 in an experimental setup to measure the strain under load. In this setup, the outer ring is deformed by 2 mm under an increasing radial load using a hydraulic press, and the strain is measured. Both a commercial reference sensor and a FE-simulation are used to validate the measurement. The results show that an implementation using printed sensors as a strain gauge works successfully. The resulting challenges, such as measuring strain gradients and printing on curved surfaces, are finally evaluated, and an outlook for further work is given. KW - rolling bearings; sensor-integrated machine elements; strain measurement; printed strain gauges; printed sensors Y1 - 2023 U6 - https://doi.org/10.3390/lubricants11100424 SN - 2075-4442 VL - 11 ER -