TY - CHAP A1 - Freier, Carolin ED - Rauch, Angela ED - Tophoven, Silke T1 - Soziale Arbeit in der Beschäftigungsförderung T2 - Integration in den Arbeitsmarkt N2 - The chapter examines the use of social work in the field of qualification and employment. I describe the example of social activation measures. With reference to the capability approach and the theory of lifeworld orientation, I show what opportunities and what limits are set for social work in promoting social participation within activation policy. KW - Soziale Arbeit KW - SGB II, Beschäftigungsförderung Y1 - 2020 SN - 978-3-17-035725-9 PB - Kohlhammer ER - TY - GEN A1 - Pfeffer, Simone T1 - Kindheit in historischer Perspektive - Teil 2 BT - Kindheit im Zuge von Industrialisierung und Modernisierung N2 - Im Zuge der Industrialisierung hat ein umfassender Wandel der Lebensverhältnisse stattgefunden, der hier mit dem Fokus auf die Kindheit beleuchtet wird. Der Prozess des Übergangs von der Agrar- zur Industriegesellschaft ist gekennzeichnet durch Technisierung, veränderte Arbeitsbedingungen, Urbanisierung, Hygienisierung, Beschleunigung, wachsende Verkehrs- und Kommunikationsdichte sowie Pluralisierung und Individualisierung der Lebensstile. Die geschichtliche Entwicklung wird in drei Phasen der Modernisierung anhand ausgewählter Beispiele wie Kinderarbeit, Wandel der Eltern-Kind-Beziehung etc. im Überblick dargestellt. KW - Kindheitsforschung Y1 - 2020 UR - https://smart.vhb.org/edu-sharing/components/render/1ab36dd2-9a9c-46bb-a41f-cb8288e65984?sort=%7B%22active%22:%22score%22,%22direction%22:%22desc%22%7D&q=kindheit%20in%20historischer PB - Virtuelle Hochschule Bayern ER - TY - GEN A1 - Pfeffer, Simone T1 - Kindheit in historischer Perspektive - Teil 1 BT - Kindheit im Mittelalter und im Übergang zur Neuzeit N2 - In dieser Einheit wird der Wandel der Lebensbedingungen von Kindern und das Verständnis der Lebensphase Kindheit vom Mittelalter zur Neuzeit nachvollzogen. Für einen differenzierten historischen Blick auf die Lebensverhältnisse von Kindern und den darauf bezogenen wissenschaftlichen Diskurs werden - sich teilweise widersprechende - Kernaussagen von sechs Wissenschaftler/-innen (Aries, De Mause, Shorter, Arnold, Shahar, Winkler) vorgestellt, die Theorien im Zusammenhang mit dem Wandel der Kindheit entwickelten. Es soll deutlich werden, wie die Bedingungen des Aufwachsens von Kindern und das Verständnis von Kindheit mit der jeweiligen Gesellschaft und ihren ökonomischen, sozialen, kulturellen und politischen Gegebenheiten zusammenhängen. KW - Kindheitsforschung Y1 - 2020 UR - https://smart.vhb.org/edu-sharing/components/render/adabdfc5-4dd2-45ee-b668-b4e884ef9218?sort=%7B%22active%22:%22score%22,%22direction%22:%22desc%22%7D&q=kindheit%20in%20historischer PB - Virtuelle Hochschule Bayern ER - TY - CHAP A1 - Pfeffer, Simone A1 - Storck, Christina ED - Wazlawik, Martin ED - Christmann, Bernd ED - Böhm, Maika ED - Dekker, Arne T1 - Resilienz und Sicherheit (ReSi) BT - Ein Präventionsprojekt für das elementarpädagogische Handlungsfeld Kita T2 - Perspektiven auf sexualisierte Gewalt. Einsichten aus Forschung und Praxis. Y1 - 2020 SN - 978-3-658-23235-1 PB - Wiesbaden ER - TY - JOUR A1 - Werner, Ulrich ED - werner, ulrich T1 - 3D-model for active vibration control of rotating machines mounted on active machine foot mounts using vibration mode coupling by asymmetry JF - Journal of Vibration Engineering & Technologies N2 - Purpose: In this work, active vibration control of rotating machines mounted on active machine foot mounts is investigated. Methods: Therefore, a simplified 3D model is derived and the mathematical coherences are described. Different mathematical solutions are presented for special boundary conditions and a method called “vibration mode coupling by asymmetry” is derived. Results: It could be shown that a symmetrical system with a machine design, where the center of gravity lies symmetrically between the machine feet with a vertical distance, and where all actuators are identical, represents a system, where all vibration shapes but one can be influenced by the controllers, when the gyroscopic effect can be neglected. In this case, a special vibration shape occurs—where the machine is only rotating at its vertical axis—which cannot be influenced by the controllers. When the stiffness and/or damping in axial and/or horizontal direction of only one actuator will be changed—which will lead to an asymmetrical system—the vibration shape with pure rotation at the vertical axis will not exist anymore. Now, the vibration shapes will become more coupled and they all can be influenced by the controllers, which is here called “vibration mode coupling by asymmetry”. Conclusions: With the here presented method of “vibration mode coupling by asymmetry”, all vibrations mode shapes can now be active controlled. KW - Rotating machines KW - Active vibration control KW - 3D-model KW - Vibration Mode Coupling by Asymmetry Y1 - 2020 U6 - https://doi.org/10.1007/s42417-020-00252-z VL - 9 PB - Springer ER - TY - CHAP A1 - Wachter, Raimund A1 - Werner, Ulrich A1 - Herzog, Hans-Georg A1 - Bauer, Christian ED - Wachter, Raimund ED - Werner, Ulrich ED - Herzog, Hans-Georg ED - Bauer, Christian T1 - Vibration behaviour of a 11 kW two pole induction motor mounted on elastic steel frame foundation with actuator system BT - Proceedings of the 12th Virtual Conference on Vibrations in Rotating Machinery (VIRM), 14-15 October 2020 T2 - 12th International Conference on Vibrations in Rotating Machinery N2 - This paper describes the vibration behaviour of a small (11 kW) two pole induction motor, which is mounted on an elastic steel frame foundation with a special actuator system. This paper presents natural frequencies as a result of experimental model analysis of the whole system – motor, actuator system and steel frame foundation – and compares them to the numerical modal analyses using a finite element model. Additionally, forced vibrations are measured using the actuators as a shaker to de­ rive the resonance frequencies of the system. The measured natural frequencies by modal analysis, the measured resonance frequencies and the simulated natural fre­ quencies are compared to each other. Additionally, the necessary electrical power of the electrodynamic actuators is analysed. KW - Induction motors KW - Actuator system KW - Vibration analysis Y1 - 2020 UR - https://www.taylorfrancis.com/chapters/oa-edit/10.1201/9781003132639-27 SN - 9781003132639 PB - CRC Press ER - TY - CHAP A1 - Werner, Ulrich ED - werner, ulrich T1 - Calculation procedure to derive the threshold of vibration stability of soft mounted induction motors with elastic rotors and sleeve bearings fixed on active motor foot mounts for arbitrary controller structures T2 - 12th International Conference on Vibrations in Rotating Machinery N2 - In the paper an iterative calculation procedure is presented for deriving the threshold of vibration stability of induction motors with flexible shafts and sleeve bearings, mounted on soft steel frame foundations with active motor foot mounts and arbitrary controller structures. The mathematical model considers the electromagnetic influence, stiffness and internal damping of the rotor, stiffness and damping of the bearing housings with end shields, of the foundation and of the oil film of the sleeve bearings, as well as the stiffness and damping of the motor foot mounts and the controlled forces, which are applied by the motor foot mounts. KW - Induction motors KW - Active vibration control KW - Stability analysis KW - Sleeve bearings KW - Motor foot mounts Y1 - 2020 UR - https://www.taylorfrancis.com/chapters/oa-edit/10.1201/9781003132639-27 SN - 9781003132639 CY - CRC Press ER - TY - JOUR A1 - Nobach, Kai A1 - Ebert, Daniel T1 - Redesign des Controllings bei BNP Paribas JF - Controlling & Management Review Y1 - 2020 U6 - https://doi.org/10.1007/s12176-020-0130-6 SN - 2195-8262 VL - 64 IS - 6/7 SP - 56 EP - 63 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Nobach, Kai A1 - Zirkler, Bernd A1 - Hofmann, Jonathan T1 - Implikationen der Digitalisierung für das Controlling JF - Controller Magazin Y1 - 2020 IS - 6 ER - TY - JOUR A1 - Lehmann, Robert T1 - Die Professionalisierung der Onlineberatung JF - FORUM - Sexualaufklärung und Familienplanung KW - Computerunterstützte Kommunikation KW - Psychosoziale Beratung KW - Sozialarbeit KW - Sexualpsychologie KW - Onlineberatung KW - Onlinekommunikation KW - digitale Kommunikation KW - Sozialarbeit KW - Sexualaufklärung Y1 - 2020 UR - https://www.sexualaufklaerung.de/publikation/die-professionalisierung-der-onlineberatung-1/ VL - 2020 IS - 2 PB - Bundesinstitut für Öffentliche Gesundheit CY - Köln ER - TY - JOUR A1 - Lehmann, Robert T1 - Evidenz als Basis der Profession JF - Soziale Arbeit: Zeitschrift für soziale und sozialverwandte Gebiete N2 - Die Entwicklungslinien der berufspolitischen Initiativen Sozialer Arbeit und der Wissenschaft der Sozialen Arbeit machen deutlich, dass sich die Wissenschaft sehr positiv entwickelt hat, während die Bemühungen um eine formale Professionalisierung gescheitert sind. Die geringe Nutzung wissenschaftlichen Wissens in der Praxis ist eine erklärende Variable. Daher wird die Profession zur verstärkten Nutzung von evidenzbasiertem Wissen aufgefordert und ermutigt, sich als Schnittstelle zwischen Wissenschaft und Praxis zu begreifen. N2 - The lines of development of professional political initiatives of social work practice and social work research make it clear that research has developed in a very positive way, whereas efforts towards formal professionalisation have failed. The low use of scientific knowledge in practice can explain this state of affairs. The profession is therefore called on and encouraged to make greater use of evidence­based knowledge and to consider itself in terms of an interface between research and practice. KW - Onlineberatung KW - Onlinekommunikation KW - digitale Kommunikation KW - Professionalisierung KW - Sozialarbeit KW - Sozialwissenschaften Y1 - 2020 U6 - https://doi.org/10.5771/0490-1606-2020-6-217 SN - 0490-1606 VL - 69 IS - 6 SP - 217 EP - 223 PB - Nomos ER - TY - JOUR A1 - Dernbach, Beatrice T1 - Volontär*in JF - Journalistikon. Das Wörterbuch der Journalistik. N2 - Eine Volontärin/ein Volontär ist eine Auszubildende/ein Auszubildender in einer Redaktion, die sowohl in Medien als auch in der Presseabteilung anderer Wirtschaftsbetriebe angesiedelt sein kann. In der Regel dauert die Ausbildung zwei Jahre und wird tariflich vergütet (DJV). Y1 - 2020 UR - https://journalistikon.de/volontaer/ ER - TY - JOUR A1 - Dernbach, Beatrice T1 - Umweltjournalismus JF - Journalistikon. Das Wörterbuch der Journalistik. N2 - Im biologischen Verständnis meint Umwelt die „auf ein Lebewesen einwirkende, seine Lebensbedingungen beeinflussende Umgebung“ (Duden 2020). Umweltjournalismus entsteht in den 1970er Jahren und ist bis in die 2000er Jahre fokussiert auf die Zerstörung der Umwelt einerseits und deren Schutz andererseits. In diesen Jahrzehnten hat sich der Umweltjournalismus ausdifferenziert in Berichterstattung über Natur, Umweltpolitik und Umweltökonomie, Umweltwissenschaftsjournalismus, technischen und Lebensstil-Umweltjournalismus (Schwägerl 2011). Y1 - 2020 UR - https://journalistikon.de/umweltjournalismus/ ER - TY - GEN A1 - Reindl, Richard A1 - Engelhardt, Emily T1 - Handlungsempfehlungen zur kurzfristigen Umsetzung von Onlineberatung in Zeiten der Coronakrise N2 - Wir erleben derzeit eine Ausnahmesituation, die nicht nur Auswirkungen auf das private und berufliche Leben von nahezu allen Menschen haben. Auch für Menschen, die auf Beratung, Begleitung und Unterstützung angewiesen sind, stellt die aktuelle Situation eine besondere Herausforderung dar. Die gewohnten und stabilisierenden Termine in der Beratungsstelle können teilweise nicht stattfinden, Menschen in Not haben in den nächsten Wochen kaum oder gar keine Anlaufstellen vor Ort, an die sie sich mit Ihren Ängsten und Nöten wenden können. Vor diesem Hintergrund machen sich Beratungsfachkräfte und Beratungsstellen derzeit viele Gedanken, wie es gelingen kann, weiterhin mit den Ratsuchenden in Kontakt zu bleiben. Die Verlagerung des Beratungskontaktes in die virtuelle Welt des Internet ist hierbei eine naheliegende Lösung. Gleichwohl müssen einige wichtige Aspekte beachtet werden, um sicher zu stellen, dass Qualität und Vertraulichkeit der Beratung gewährleistet sind. Die folgende Handlungsempfehlung bietet einen kurzen Überblick über die wichtigsten zu beachtenden Punkte. KW - Computergestützte Kommunikation KW - Sozialarbeit KW - Corona KW - Onlinekommunikation KW - Onlineberatung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-39476 CY - Nürnberg ER - TY - JOUR A1 - Wenzel, Joachim A1 - Jaschke, Stephanie A1 - Engelhardt, Emily ED - Kühne, Stefan ED - Hintenberger, Gerhard T1 - Krisenberatung am Telefon und per Video in Zeiten von Corona JF - e-beratungsjournal: Zeitschrift für Onlineberatung und computervermittelte Kommunikation N2 - Der Beitrag ist erstmals als Handreichung der Fachgruppe „Onlineberatung und Medien“ der Deutschen Gesellschaft für Systemische Therapie, Beratung und Familientherapie (DGSF) unter www.dgsf.org erschienen. Er richtet sich an Berater*innen, die während der akuten Ansteckungsgefahr während der Corona-Krise 2020 kaum noch Face-to-Face beraten können und übergangslos von Face-to-Face-Beratung zu Telefon- und/oder Videoberatung wechseln müssen. Besonderheiten der beiden letztgenannten Settings werden aufgezeigt. Dabei wird die herausfordernde Situation der Beratenden und der Klient*innen während der Krisenzeit aufgegriffen und angeregt, Selbstfürsorge zu betreiben sowie ressourcenorientiert mit den Herausforderungen umzugehen. Ein Schwerpunkt liegt auf Krisenintervention sowie dem Umgang mit suizidalen Krisen in der Telefon- und Videoberatung. KW - Computergestützte Kommunikation KW - Sozialarbeit KW - Krisenberatung KW - Telefonberatung KW - Videoberatung Y1 - 2020 UR - https://www.e-beratungsjournal.net/wp-content/uploads/2020/04/wenzel_et_al.pdf VL - 16 IS - 1 ER - TY - RPRT A1 - Dengler, Simon Andreas A1 - Fischer, Jakob A1 - Luber, Michael A1 - Lenkowski, Holger A1 - Schüßler, Christoph A1 - Carruth, Kevin A1 - Urbanek, Peter A1 - Ziemann, Olaf T1 - Power over POF – A Short Overview T2 - P2 Sensors and Measurement Systems for Physical Quantities N2 - There are various applications in high voltage, explosive or high electromagnetic interfered environments that require sensors with an electrical isolation from other components of a system. The basics of possible solution, based on optically powered sensor links, were shown previously. Because of different requirements for the applications, a variety of system approaches has been developed (available power for sensor purposes; length between the control node and the sensor; speed of transmitted data etc.). Key requirements and the current approaches will be discussed below. KW - remotely powered sensors KW - galvanic isolation KW - sensor networks KW - polymer optical fiber KW - power over fiber Y1 - 2020 SN - 978-3-9819376-2-6 U6 - https://doi.org/10.5162/SMSI2020/P2.15 VL - 2020 SP - 254 EP - 255 PB - AMA Service GmbH CY - Wunstorf ER - TY - CHAP A1 - Dengler, Simon Andreas A1 - Lechner, Michael A1 - Luber, Michael A1 - Fischer, Jakob ED - Fahlbusch, Thomas T1 - Structural Health Monitoring mit OTDR KW - Strucutral Health Monitorung KW - OTDR KW - POF Y1 - 2020 SN - 9783959004428 PB - TEWISS Verlag ER - TY - CHAP A1 - Dietz, Michael A1 - Meissner, Barbara A1 - Schmidt-Vollus, Ronald ED - Institute of Electrical and Electronics Engineers, IEEE T1 - Teaching Digitalization and Systems Modelingfor Virtual Commissioning Using Virtual Labs T2 - 2020 IEEE 29th International Symposium on Industrial Electronics (ISIE) Proceedings N2 - The new seminar "Digital Twins for Virtual Commissioning of Production Machines" follows a technical approach that uses virtualization and offers the possibility to pursue an uncommon teaching method called problem-based learning (PBL). The seminar is divided into two parts, with fundamental theoretical knowledge in automation technology and systems modeling provided first. In the second part, the students use the dedicated software environment to edit projects on their own, and at this point the PBL approach is used. This method enables students to self-organize their learning process and take an active part in the seminar. The idea for the seminar and virtual teaching lab evolved from the industrial use case of testing software for programmable logic controllers (PLCs) without the real machine, using virtual commissioning (VC). The primary effort of VC lies in the manual creation of a digital representation of each mechatronic component providing the same behavior seen from PLC perspective. Students are taught to do this, create the so-called digital twin (DT). KW - virtual lab KW - digitalization KW - teaching Y1 - 2020 UR - 10.1109/ISIE45063.2020.9152258 ER - TY - CHAP A1 - Meissner, Barbara A1 - Streitferdt, Felix A1 - Pazureck, Andreas ED - Müller Werder, Claude ED - Erlemann, Jennifer T1 - Inverted Classroom in der Studieneingangsphase – individualisiertes Lernen als Hilfe beim Einstieg ins Studium T2 - Seamless Learning – lebenslanges, durchgängiges Lernen ermöglichen N2 - Bei Inverted Classroom wird eine selbstgesteuerte Vorbereitungsphase und eine interaktive Präsenzphase kombiniert. Methodik und didaktische Struktur werden entsprechend des jeweiligen Lehrkontextes gewählt und aufeinander abgestimmt. Das Konzept des Inverted Classroom bietet methodische Ansatzpunkte, um Lehre auch in der Studieneingangsphase fl exibel zu gestalten und den Übergang ins Studium zu erleichtern. In der vorliegenden Studie wurden Studierende aus drei Grundlagenver-anstaltungen im Inverted-Classroom-Format befragt, wie sie mit dem jeweiligen For-mat umgehen. Im Ergebnis zeigte sich, dass das Konzept des Inverted Classroom dem Lern- und Betreuungsbedarf der Studierenden entgegenkommt. Die Aussagen weisen auf eine Stärkung der fachbezogenen Selbstwirksamkeitserwartung hin – einen zentralen Indikator für den Studienverbleib. Mit den Ergebnissen soll unterstrichen werden, dass Inverted Classroom einen erfolgreichen Übergang ins Studium unterstützen kann. Zukünft ig sollen die Annahmen in Bezug auf weitere Blended-Learning-Konzepte und reine Präsenzlehre geprüft werden. KW - inverted classroom KW - seamless learning Y1 - 2020 UR - https://www.waxmann.com/index.php?eID=download&buchnr=4244#page=111; 10.31244/9783830992448 VL - 2020 PB - Waxmann ER - TY - CHAP A1 - Zinger, Benjamin A1 - Pitzner, Eva ED - Zinger, Benjamin ED - Vode, Dzifa ED - Oberbeck, Niels T1 - Systemische Betrachtung: Ebenen und Schnittstellen bei der Beratung und Begleitung von Lehrenden und Studierenden T2 - Lernen für die Zukunft. Impulse für eine lehrbezogene Hochschulentwicklung N2 - In dem Artikel, der auch als Einleitung für den Sammelband "Lernen für die Zukunft. Impulse für eine lehrbezogene Hochschulentwicklung" dient, wird nach einer kurzen Darstellung des Projekts "Mehr Qualität in Lehre, Beratung und Betreuung" der TH Nürnberg das Modell der pädagogischen Hochschulentwicklung vorgestellt. Im Anschluss wird ein Überblick über die dreiteilige Struktur des Sammelbandes und die Einzelbeiträge gegeben. Y1 - 2020 SN - 9783779954750 VL - 2020 PB - Beltz Juventa CY - Weinheim, Germany ET - 1. Aufl. ER - TY - CHAP A1 - Zinger, Benjamin A1 - Schreiweis, Leonie A1 - Rosenkranz, Doris ED - Zinger, Benjamin ED - Vode, Dzifa ED - Oberbeck, Niels T1 - Service Learning - ein Baustein innovativer Lehre T2 - Lernen für die Zukunft. Impulse für eine lehrbezogene Hochschulentwicklung N2 - Der vorliegende Beitrag beschreibt zunächst das innovative Format Service Learning an Hochschulen, skizziert dann didaktische Überlegungen und Befunde zu Effekten des Konzeptes und präsentiert abschließend exemplarisch konkrete Schritte zur Etablierung des Konzeptes an der TH Nürnberg. Y1 - 2020 SN - 9783779954750 PB - Beltz Juventa CY - Weinheim ER - TY - JOUR A1 - Zinger, Benjamin A1 - Schwertner, Nicole ED - Waldherr, Franz ED - Walter, Claudia ED - Dingeldey, Claudia T1 - Systemrelevant?! Über wirkungsvolle Lehrentwicklung und Helden des Alltags JF - DiNa- Didaktiknachrichten N2 - In diesem Beitrag werden Initiativen der Technischen Hochschule Nürnberg vorgestellt, die im Zuge des Qualitätspakts Lehre umgesetzt wurden. Der Qualitätspakt Lehre (QPL) ist zum Zeitpunkt des Erscheinens des Artikels fast schon Geschichte, denn der Pakt endete im Dezember 2020. Acht Jahre QPL – welche Aktivitäten sind in dieser Laufzeit entstanden und wie systemrelevant sind diese Maßnahmen? Der Begriff „systemrelevant“ erfuhr in der Corona-Pandemie eine besondere Aufmerksamkeit. Angesprochen sind damit Berufsgruppen, die während der Pandemie als besonders bedeutsam erkannt wurden, wie beispielsweise Krankenpflegerinnen und -pfleger. Sie wurden in der Presse als „Helden des Alltags“ bezeichnet. Diese Begriffe aus der Überschrift des Artikels werden auf das Projektvorhaben übertragen: Nach der Lektüre soll einschätzbar sein, ob die Projektaktivitäten als systemrelevant einzuordnen sind. Nachdem Schwerpunkte des Projekts vorgestellt werden, stellt sich die Frage, inwieweit die Themen und Impulse des Projekts für die Hochschule eine über die Projektlaufzeit hinausgehende Wirkung erzielen können. Y1 - 2020 UR - https://www.didaktikzentrum.de/images/cwattachments/12_2020.pdf SN - 1612-4537 IS - 12 ER - TY - CHAP A1 - Zinger, Benjamin A1 - Angenent, Holger T1 - Lernen in der Corona-Pandemie - Willkommen im MorgenHeute T2 - Lernen im Hochschulzusammenhang. Lehre^N - das Bündnis für Hochschullehre N2 - Der Beitrag skizziert den Digitalisierungsschub des Hochschulsystems im Frühjahr 2020 und wirft die Frage auf, wie Hochschulen mit der veränderten Realität umgehen wollen. Zu diesem Zweck wird ein utopischer Vergleich aktueller und zukünftiger Lehr-Lernszenarien vorgenommen. Der Beitrag möchte so Akteur:innen im Hochschulwesen zu einer Betrachtung verschiedener Entwicklungsszenarien einladen und zum Handeln anregen. Y1 - 2020 SN - 9783000671913 PB - Optimal Media GmbH CY - Hamburg, Germany ER - TY - CHAP A1 - Zinger, Benjamin A1 - Bröker, Thomas ED - Zinger, Benjamin ED - Vode, Dzifa ED - Oberbeck, Niels T1 - Das Lernen der Zukunft - Veränderungen weiterdenken T2 - Lernen für die Zukunft. Impulse für eine lehrbezogene Hochschulentwicklung N2 - Ist das Lehren und Lernen an Hochschulen noch zeitgemäß? Welche Veränderungen zeichnen sich ab und was ist notwendig, damit diese umgesetzt werden können? Dieser Beitrag möchte zu diesen Fragen Ideen beisteuern und Reflexion anstoßen. Nach einer Einordnung der Situation zum Startpunkt des Qualitätspakt Lehre (QPL) werden die Entwicklungen des Projekts „Mehr Qualität in Lehre, Beratung und Betreuung“ (QuL) sowie Schwerpunkte und Schwachstellen herausgestellt. Diese Analyse dient als Anstoß zur weiteren Reflexion des Veränderungsbedarfs und der Veränderungstendenzen in der Hochschullehre. Ein Schwerpunkt wird dabei auf Herausforderungen gelegt, die mit einer möglichen digitalen Transformation des hochschulischen Lernens und Lehrens einhergehen. Y1 - 2020 SN - 9783779954750 VL - 2020 PB - Beltz Juventa CY - Weinheim, Germany ET - 1. Aufl. ER - TY - CHAP A1 - Sowa, Frank A1 - Staples, Ronald ED - Rauch, Angela ED - Tophoven, Silke T1 - Beratungs- und Vermittlungsaktivitäten von Fachkräften der Arbeitsverwaltung T2 - Integration in den Arbeitsmarkt. Teilhabe von Menschen mit Förder- und Unterstützungsbedarf Y1 - 2020 SN - 978-3-17-035725-9 PB - Kohlhammer CY - Stuttgart ER - TY - JOUR A1 - Sowa, Frank T1 - Arbeitslosenversicherung für Solo-Selbständige: Eine qualitative Studie zur Antragspflichtversicherung nach § 28a SGB III JF - IAB-Forschungsbericht N2 - "Das Institut für Arbeitsmarkt- und Berufsforschung (IAB) evaluierte im Jahr 2013 im Rahmen seines gesetzlichen Auftrags nach § 282 SGB III das Versicherungspflichtverhältnis auf Antrag in der Arbeitslosenversicherung nach § 28a SGB III ('Antragspflichtversicherung'). So wurden die Einschätzungen von Führungs- und Fachkräften in Dienststellen der Bundesagentur für Arbeit (BA) zur Antragspflichtversicherung erhoben. Das Forschungsinteresse richtete sich dabei auf die Bewertung und konkrete Umsetzung des Versicherungspflichtverhältnisses auf Antrag. Zudem wendete sich das Forschungsprojekt der Lebenswirklichkeit von Solo-Selbständigen zu und untersuchte, welche Rolle die Antragspflichtversicherung für die Existenzgründung gespielt hat und wie bedeutsam für Solo-Selbständige eine soziale Absicherung ist (Arbeitslosenversicherung, Krankenversicherung, Rentenversicherung). Als Untersuchungsgruppe wurden Solo-Selbständige ausgewählt, weil es sich dabei um eine besonders vulnerable Gruppe von Selbständigen handelt." (Autorenreferat, IAB-Doku) Y1 - 2020 UR - http://doku.iab.de/forschungsbericht/2020/fb0320.pdf SN - 2195-2655 IS - 3 PB - IAB CY - Nürnberg ER - TY - RPRT A1 - Metz, Thomas A1 - Stumpf, Arne T1 - Nano-BHKW-Teststand – Untersuchungen zur Realisierbarkeit eines Blockheizkraftwerkes im Kleinstmaßstab auf Basis thermoelektrischer Generatoren für die Anwendung als stromproduzierende Heizung in Einfamilienhäusern N2 - Mit Blockheizkraftwerken (BHKW) im Kleinstmaßstab (Nano-BHKW) können Besitzer von Einfamilienhäusern den Effizienzvorteil der Kraft-Wärme-Kopplung nutzen. Aktuelle Nano-BHKW-Systeme mit Gasmotor, Dampfmotor, Stirlingmotor oder Brennstoffzelle sind relativ kosten- und wartungsintensiv. Das Forschungsprojekt untersucht eine mögliche Alternative zu den bisherigen Systemen: Ein Nano-BHKW auf Basis thermoelektrischer Generatoren (TEG). Im Rahmen des Projekts werden die Vorteile dieses Systems gegenüber den bisher kommerziellen Systemen erforscht. Hierzu werden aktuell verfügbare TEG eingesetzt und eine Versuchsanlage in kommerziellem Maßstab mit einer elektrischen Leistung von ca. 300 Wattel und einer Heizleistung von ca. 6 kWth errichtet. Darüber hinaus soll auch das Potenzial in Entwicklung befindlicher TEG-Materialien und Herstellungsmethoden für diese Anwendung auf theoretischer Basis geprüft werden. Die Versuchsanlage wird mit Propan als Brennstoff betrieben. Die zu erforschende Technik ermöglicht auch den Einsatz anderer Brennstoffe wie Erdgas, Biogas, Heizöl oder Holzbrennstoffe. Bei positivem Projektergebnis strebt das Forschungsteam eine Entwicklung bis zur Marktreife in Kooperation mit der Industrie an. T3 - Vorlaufforschung / Schriftenreihe der Georg-Simon-Ohm-Hochschule, Nürnberg - 2018 KW - Blockheizkraftwerk KW - Thermoelektrik Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-34797 SN - 1867-4585 VL - 2018 CY - Nürnberg ER - TY - CHAP A1 - Zinger, Benjamin T1 - Die Bedeutung von Service Learning für die Hochschuldidaktik T2 - Service Learning an Hochschulen - Konzeptionelle Überlegungen und innovative Beispiele N2 - Das Lehren und Lernen an Hochschulen ist einem ständigen Wandel unterworfen. Dieser Artikel verfolgt das Ziel, Veränderungen im Hochschulbereich mit Blick auf das Lehr- und Lernverständnis zu beleuchten, um daraus ableitend die Frage stellen zu können, inwieweit Service Learning ein Impulsgeber für die Hochschuldidaktik sein kann. Zunächst soll dazu der Wandel des Lehr- und Lernverständnisses, der schlagworthaft mit dem vielzitierten „shift from teaching to learning“ umschrieben wird, nachvollzogen werden. Des Weiteren fällt der Blick auf äußere Rahmenbedingungen, die die Ausgestaltung der Hochschullehre maßgeblich beeinflussen. Diese skizzenhaft vorgestellten Veränderungs- und Anforderungsdynamiken dienen als Grundlage dafür, eine Einschätzung zu wagen, inwieweit das Lehr- und Lernkonzept Service Learning den aktuellen Anforderungen einer zeitgemäßen Lehre gerecht werden oder gar als Impulsgeber dienen kann. Herausgestellt werden soll, welchen hochschuldidaktischen Akzentsetzungen bei der Ausgestaltung von Service Learning besondere Beachtung zukommen sollte. Y1 - 2020 SN - 9783779953692 PB - Beltz Juventa CY - Weinheim, Germany ER - TY - JOUR A1 - Sowa, Frank T1 - On the Research Service Learning in Studies: Student Field Research as a Contribution to Personality Development (in Chinese: 研究型服务式学习:以实地研究促进学生的人格发展) JF - Application-Oriented Higher Education Research N2 - In the teaching research project "Homelessness in the Metropolitan Region of Nuremberg" at the Faculty of Social Sciences of Nuremberg University of Applied Sciences), German students of Bachelor's degree of Social Work could acquire not only research skills and knowledge of qualitative and quantitative social research, but also their own data in a concrete social work field to present and evaluate the results obtained to a broader public at a conference initiated for this purpose. Research service learning, as the reflections of the students show, makes a contribution to the development of one's own personality by breaking down his/her own prejudices or overcoming his/her own boundaries (Full Text in Chinese). Y1 - 2020 UR - https://oversea.cnki.net/knavi/JournalDetail?pcode=CJFD&pykm=YYGJ VL - 5 IS - 3 ER - TY - CHAP A1 - Sowa, Frank A1 - Zitzmann, Christina T1 - Einleitung T2 - Anders lehren und lernen. Forschendes Service Learning über Lebenswelten von Menschen in Wohnungsnot N2 - Wenn nun Obdach- und Wohnungslosigkeit im Kontext der Hochschule zum Gegenstand von Lehren und Lernen werden, kann dies auf verschiedene Weise geschehen. Herkömmliche, klassische Lehrveranstaltungen fokussieren auf eine Vermittlung von vorhandenem Wissen und aktuellen, wissenschaftlichen Erkenntnissen. Die Lerninhalte beziehen sich in diesen Vorlesungen oder Seminaren beispielsweise auf eine historische Einordnung des sozialen Phänomens der Obdachlosigkeit, Sozial- und Wohnraumpolitik, Risikofaktoren und individuelle und strukturelle Ursachen von Obdach- und Wohnungslosigkeit, Wege aus der Wohnungslosigkeit, geschlechtsspezifische oder altersspezifische Differenzierungen der Betroffenen, rechtliche und organisatorische Rahmenbedingungen des Hilfesystems, verschiedene Konzepte und Methoden der Sozialen Arbeit mit Randgruppen, insbesondere unterschiedliche, innovative Ansätze der Wohnungslosenhilfe wie Streetwork oder Housing First, internationale Vergleiche und vieles mehr. Die Lerninhalte entsprechen dem wissenschaftlichen Forschungsstand, die Wissensaneignung wird meist in Form von Klausuren überprüft. Drei Projekte im Studiengang Bachelor Soziale Arbeit an der Fakultät Sozialwissenschaften der Technischen Hochschule Nürnberg – ein sozialwissenschaftliches Lehrforschungsprojekt, ein forschungsorientiertes Service Learning Projekt und ein handlungs- und erfahrungsorientiertes Filmprojekt (siehe unten) – haben unabhängig voneinander andere Wege gesucht und gefunden, um das Themenfeld der Obdach- und Wohnungslosigkeit dem Lehren und dem Lernen an Hochschulen zugänglich zu machen. Gemeinsam ist ihnen, dass Studierende mit Hilfe des Forschenden Lernens die pluralen Lebenswelten von Menschen in Wohnungsnot erkunden, sie sich gleichzeitig das korrespondierende, professionelle Handlungs- und Arbeitsfeld der Sozialen Arbeit erschließen und womöglich zu neuen Erkenntnissen und Einsichten gelangen. Sie kommen also in Kontakt mit vulnerablen Adressat*innen und professionellen Fachkräften der Sozialen Arbeit, sie bewegen sich in einem sehr voraussetzungsreichen Setting, einer komplexen Interaktionsordnung von Hilfe und Kontrolle – und sie tun dies anders als in der Rolle von Praktikant*innen, die während des Studiums Praxiserfahrungen sammeln. Y1 - 2020 SN - 978-3-7344-1066-6 PB - Wochenschau Verlag CY - Frankfurt am Main ER - TY - JOUR A1 - Hahn, Alexander A1 - Timo, Knackstedt A1 - Sandner, Philipp T1 - The Blockchain's Impact on Digital Marketing Platforms JF - Marketing Review St. Gallen N2 - The platform economy is booming. However, platform business models are often based on powerful monopolies or oligopolies, leading stakeholders to look for more balanced ecosystems. As blockchain technology offers decentralized solutions, it appears attractive for replacing such platforms. However, many blockchain applications are still in an early stage. This paper scrutinizes how the blockchain affects the platform economy and whether relevant blockchain applications with product/market fit exist. The paper draws on a qualitative mixed-method approach followed by a case analysis to develop a basic framework for assessing the impact of blockchains on platform economies. The results are illustrated by means of a blockchain based platform with a proven product/market fit. Options for incumbent firms to draw on this new infrastructure are outlined. Y1 - 2020 UR - https://www.econstor.eu/bitstream/10419/276115/1/MRSG_2020_6_20-29.pdf SN - 1865-7516 VL - 37 IS - 6 PB - Thexis Verlag, St.Gallen ER - TY - JOUR A1 - Paul, Claudia T1 - Beteiligung der Schwerbehindertenvertretung bei Personalauswahlverfahren im Jobcenter - Anmerkung zu BAG, Beschluss vom 19.12.2018 – 7 ABR 80/16 JF - Juristische Rundschau (JR) Y1 - 2020 IS - 7 ER - TY - CHAP A1 - Niessen, Jan A1 - Hiß, Christian T1 - 30 Prozent Ökolandbau. Der Markt wird’s schon richten? T2 - KTBL Tagungsband, 2020, "Muss denn alles Öko sein?" N2 - Es ist politisches Ziel, den ökologischen Landbau – als Goldstandard für nachhaltige Landwirtschaft – deutlich auszuweiten. Hierzu wurden auf Bundes- und Länderebene verschiedene Programme und Fördermaßnahmen entwickelt. Flankierende Instrumente mit ordnungsrechtlichen Lenkungswirkungen sind dabei bislang nicht vorgesehen. Zur Förderung des Öko-Marktwachstums als wirtschaftliche Voraussetzung für weitere Umstellung auf Ökolandbau sind überwiegend „weiche“ Angebote und Formate initiiert. Über Instrumente wie Öko-Modellregionen oder Förderprojekte für Wertschöpfungskettenmanagement stehen Fortbildung und Vernetzung von Anbietern oder Information von Kunden über (regionale) Herkunft und Vorteile von Ökoprodukten im Fokus. Es wird von unterschiedlichen Seiten infrage gestellt, ob mit diesen Instrumenten die hochgesteckten Ziele wirklich erreicht werden können (Meyer et al. 2019). Gleichzeitig steht die Ausrichtung der zukünftigen gemeinsamen Agrarpolitik (GAP) in Europa zur Debatte und Entscheidung. Dabei besteht die Chance, selbige mit dem geplanten Green New Deal der Europäischen Kommission in Einklang zu bringen (Mönch 2020). Diese übergeordneten Rahmenbedingungen und Regelungen werden voraussichtlich nationale und regionale Ziele und Maßnahmen stark tangieren. In diesem Beitrag wird versucht, eine kleine Bestandsaufnahme und Einordnung der Maßnahmen und Instrumente zur Erreichung von Nachhaltigkeitszielen in der deutschen Landwirtschaft vorzunehmen. Damit verbunden sollen weitere Fragen, Überlegungen und Lösungsansätze in die Diskussion eingebracht werden, die bislang möglicherweise wenig berücksichtigt oder konkretisiert wurden. KW - Ökolandbau KW - Ökosystembewirtschaftung KW - Ökologisierung Y1 - 2020 UR - https://www.ktbl.de/fileadmin/user_upload/Allgemeines/Download/Tagungen_2020/KTBL-Tage/KTBL-Tage_2020.pdf VL - 3. Band PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e.V. (KTBL) CY - Darmstadt ER - TY - GEN A1 - Monz, Alexander T1 - Konstruktive Projektarbeiten als digitale Herausforderung KW - Digitale Lehre Y1 - 2020 ER - TY - CHAP A1 - Sowa, Frank T1 - „Meine Vorstellungen von Obdachlosen [wurden] (...) komplett zerstört“. Studentische Feldforschung als Beitrag zur Persönlichkeitsentwicklung? T2 - Anders lehren und lernen. Forschendes Service Learning über Lebenswelten von Menschen in Wohnungsnot Y1 - 2020 SN - 978-3-7344-1066-6 PB - Wochenschau Verlag CY - Frankfurt am Main ER - TY - CHAP A1 - Zitzmann, Christina A1 - Sowa, Frank T1 - Anders lehren und lernen – lohnt es sich? T2 - Anders lehren und lernen. Forschendes Service Learning über Lebenswelten von Menschen in Wohnungsnot Y1 - 2020 SN - 978-3-7344-1066-6 PB - Wochenschau Verlag CY - Frankfurt am Main ER - TY - JOUR A1 - Biedermann, Till M. A1 - Czeckay, Pasquale A1 - Hintzen, Nils A1 - Kameier, Frank A1 - Paschereit, C. O. T1 - Applicability of Aeroacoustic Scaling Laws of Leading Edge Serrations for Rotating Applications JF - Acoustics N2 - The dominant aeroacoustic mechanisms of serrated leading edges, subjected to highly turbulent inflow conditions, can be compressed to spanwise decorrelation effects as well as effects of destructive interference. For single aerofoils, the resulting broadband noise reduction is known to follow spectral scaling laws. However, transferring serrated leading edges to rotating machinery, results in noise radiation patterns of significantly increased complexity, impeding to allocate the observed noise reduction to the underlying physical mechanisms. The current study aims at concatenating the scaling laws for stationary aerofoil and rotating-blade application and thus at providing valuable information on the aeroacoustic transferability of leading edge serrations. For the pursued approach, low-pressure axial fans are designed, obtaining identical serrated fan blade geometries than previously analyzed single aerofoils, hence allowing for direct comparison. Highly similar spectral noise reduction patterns are obtained for the broadband noise reduction of the serrated rotors, generally confirming the transferability and showing a scaling with the geometrical parameters of the serrations as well as the inflow conditions. Continuative analysis of the total noise reduction, however, constrains the applicability of the scaling laws to a specific operating range of the rotors and motivates for a devaluation of the scaling coefficients regarding additional rotor-specific effects. Y1 - 2020 U6 - https://doi.org/10.3390/acoustics2030030 SN - 2624-599X VL - 2 IS - 3 SP - 579 EP - 594 PB - MDPI AG ER - TY - CHAP A1 - Kaiser, Markus T1 - Design thinking T2 - Transforming Media: neue Geschäftsmodelle in der digitalen Welt N2 - Egal ob Print, Fernsehen oder Radio: Der klassische Journalismus sucht im Medienwandel nach Wegen, sich weiterhin tragen zu können. Erfolg versprechende Angebote lassen alte Geschäftsmodelle hinter sich und setzen auf neue Möglichkeiten der Finanzierung. Das Buch Transforming Media dreht sich deshalb um die Frage: Wie lässt sich der digitale Wandel nutzen, um neue Geschäftsmodelle für den Journalismus zu kreieren? Die Publikation ist entstanden aus der jährlichen Tagung transformingMedia, die die Medientage München GmbH gemeinsam mit dem MedienNetzwerk Bayern in Nürnberg veranstaltet. KW - Medien KW - Journalismus KW - Digitale Transformation KW - Neue Geschäftsmodelle KW - Onlinejournalismus Y1 - 2017 UR - https://markus-kaiser.org/wp-content/uploads/2019/03/2017-transforming-media.pdf SN - 978-3-9815512-3-5 VL - 2017 PB - Verlag Dr. Gabriele Hooffacker CY - München ER - TY - JOUR A1 - Ivens, Bjoern A1 - Riedmueller, Florian A1 - van Dyck, Peter T1 - Success factors in managing the sponsor–sponsee relationship—a fuzzy-set qualitative comparative analysis for state-owned enterprises in Germany JF - International Journal of Sports Marketing and Sponsorship N2 - PurposeThe purpose of this paper is to provide meaningful information about sponsorship management in state-owned enterprises.Design/methodology/approachQualitative and quantitative data from Germany are analyzed in a case study approach using fuzzy-set qualitative comparative analysis (Fs/QCA)—an analytic method relevant for describing configurational patterns of causal factors.FindingsThe case study of sponsorships from state-owned enterprises in Germany reveals four alternative configurations of top-management support, sponsee prominence, standardized processes, and sponsorship leverage explaining sponsor satisfaction.Originality/valueThe paper combines two underrepresented but important aspects of sponsorship research, i.e. sponsorship management in state-owned enterprises, in an empirical study. Further, present study adds to sponsorship literature by pointing to fuzzy-set Fs/QCA as a relatively novel method that can capture the phenomenon of complex causality. Y1 - 2020 U6 - https://doi.org/10.1108/IJSMS-09-2019-0102 SN - 1464-6668 VL - 21 IS - 4 SP - 577 EP - 596 PB - Emerald ER - TY - JOUR A1 - Bogdanski, Ralf A1 - Cailliau, Cathrin T1 - Nachhaltige Stadtlogistik – Lastenrad statt Kleinlaster JF - bau intern Y1 - 2020 SN - 0724-4290 VL - 2020 IS - 4 PB - Bayerische Staatsministerium für Wohnen, Bau und Verkehr CY - München ER - TY - RPRT A1 - Bogdanski, Ralf A1 - Helms, Birgitt ED - Okkels, Jesper T1 - Nachhaltigkeit von Zustellkonzepten für B2C-Sendungen N2 - Einfluss eines B2C-Zustellkonzeptes in anbieteroffene Paketboxen auf die Effizienz und Nachhaltigkeit der Zustelltour ; Bewertung der Studie und Methodik Y1 - 2020 UR - https://bdkep.de/files/bdkep-dateien/blog/2020/20200902%20-%20Blog%20-%20sesam%20-%20Nachhaltigkeit_von_Zustellkonzepten.pdf PB - Sesam GmbH ER - TY - JOUR A1 - Gaugler, Tobias A1 - Pieper, Maximilian A1 - Michalke, Amelie T1 - Wahre Preise würden die Nachfrage ändern BT - Ein wirtschaftswissenschaftlicher Beitrag zur In-Wert-Setzung landwirtschaftlicher Erzeugnisse JF - Misereor - Welt-Sichten Y1 - 2020 VL - 2020 IS - 7/8 PB - Welt-Sichten CY - Frankfurt/Main ER - TY - JOUR A1 - Heim, Luisa A1 - Walther, Christoph T1 - Soziale Teilhabe - Ergebnisse einer Replikation der BAESCAP-Studie JF - Sozialpsychiatrische Informationen N2 - Die BAESCAP-Studie (Teilhabechancen chronisch psychisch kranker Menschen in Deutschland) wurde bei einem Einrichtungsträger in Würzburg wiederholt mit nur zum Teil ähnlichen Ergebnissen. KW - Versorgungsforschung KW - Soziale Teilhabe KW - Replikation KW - BAESCAP-Studie Y1 - 2020 VL - 50 IS - 1 PB - Psychiatrie-Verlag CY - Köln ER - TY - JOUR A1 - Baatz-Kolbe, Christel A1 - Pohlmann, Wolfgang A1 - Walther, Christoph T1 - TriN - Trialog im Netz. Eine interaktive Plattform für die Tätigkeit von Genesungsbegleiter*innen JF - Sozialpsychiatrische Informationen N2 - Aufbau, Funktion und Erfahrungen aus dem Projekt TriN (Trialog im Netz) KW - Genesungsbegleitung KW - TriN KW - Trialog im Netz Y1 - 2020 VL - 50 IS - 4 PB - Psychiatrie-Verlag CY - Köln ER - TY - GEN A1 - von Hoffmann, Alexander A1 - Lopez, Oliver T1 - Anwendungen der subtraktiven Klangsynthese am Beispiel eines Bass Sounds T2 - Modulare Klangsynthese: Modul 5 Y1 - 2020 UR - https://oer.vhb.org/edu-sharing/components/collections?id=d56694ff-1c96-4411-8ef5-1fcc8297b8e6 ER - TY - GEN A1 - von Hoffmann, Alexander A1 - Lopez, Oliver T1 - Grundlagen der subtraktiven Klangsynthese T2 - Modulare Klangsynthese: Modul 4 Y1 - 2020 UR - https://oer.vhb.org/edu-sharing/components/collections?id=f586b922-eb2d-4c66-9b90-d87b93c6dc28 ER - TY - GEN A1 - von Hoffmann, Alexander A1 - Lopez, Oliver T1 - Soundeffekte T2 - Modulare Klangsynthese - Modul 7 Y1 - 2021 UR - https://oer.vhb.org/edu-sharing/components/collections?id=32c734d9-e466-4a07-8d49-790ae7f5ed87 ER - TY - GEN A1 - von Hoffmann, Alexander A1 - Lopez, Oliver T1 - Filter und Modulatoren T2 - Modulare Klangsynthese: Modul 3,2 Y1 - 2020 UR - https://oer.vhb.org/edu-sharing/components/collections?id=d8bf3f15-49d9-465d-821a-7be661d04489 ER - TY - GEN A1 - von Hoffmann, Alexander A1 - Lopez, Oliver T1 - Oszillatoren, Obertöne und Rauschen T2 - Modulare Klangsynthese - Modul 1 Y1 - 2020 UR - https://oer.vhb.org/edu-sharing/components/collections?id=a0759f7f-2eb8-4a31-910b-d4b191386a20 ER - TY - GEN A1 - von Hoffmann, Alexander A1 - Lopez, Oliver T1 - Anwendungen der subtraktiven Klangsynthese am Beispiel eines Lead Sounds T2 - Modulare Klangsynthese: Modul 5 Y1 - 2020 UR - https://oer.vhb.org/edu-sharing/components/collections?id=04878c7a-527e-4601-9185-b2822640b103 ER - TY - GEN A1 - von Hoffmann, Alexander A1 - Lopez, Oliver T1 - Spannungskontrollierte Verstärker - (VCA) und Hüllkurven (Envelope) T2 - Modulare Klangsynthese - Modul 2 Y1 - 2020 UR - https://oer.vhb.org/edu-sharing/components/collections?id=615258df-4402-4482-87a2-2979335384a7 ER - TY - GEN A1 - von Hoffmann, Alexander A1 - Lopez, Oliver T1 - Anwendungen der subtraktiven Klangsynthese am Beispiel von Cymbal Sounds T2 - Modulare Klangsynthese: Modul 5 Y1 - 2020 UR - https://oer.vhb.org/edu-sharing/components/collections?id=a4c5712b-1128-47b1-bc1c-d76df0dd4d8e ER - TY - VIDEO A1 - von Hoffmann, Alexander A1 - Keller, Adriaen A1 - Körner, Marlies A1 - Schmid, Tom A1 - Hutterer, Julian A1 - Heil, Katja A1 - Häupl, Therese A1 - Raubach, Dirk A1 - Schiessl, Karl A1 - Wolter, Falko A1 - Caylan, Hasan A1 - Bonnacker, Eduard A1 - Kaiser, Markus A1 - Ebnöther, Yves A1 - Hahn, Alexander T1 - Das Auto als Kommunikationsplattform der Zukunft Y1 - 2020 UR - https://youtu.be/2-GN1feCWYE?si=sHYObq37FqO7wHyv ER - TY - GEN A1 - von Hoffmann, Alexander T1 - 444 (Alexander von Hoffmann Remix) T2 - Synthetic Syntax + Remixes EP Y1 - 2020 UR - https://humanized.bandcamp.com/track/444-alexander-von-hoffmann-remix PB - humanized ER - TY - JOUR A1 - Riedmüller, Florian A1 - Hahn, Alexander A1 - Klug, Alexander T1 - Empathic market research: The added value of eye tracking data for affective computing UX research JF - PraxisWISSEN N2 - Der Einsatz apparativer Technologien und künstlicher Intelligenz verändert zunehmend die Beschaffung und Auswertung von Marktforschungsdaten. Immer häufiger erfasst geeignete Bildanalysesoftware emotionale User-Reaktionen mittels Affective Computing. Die visuelle Aufmerksamkeit von Personen lässt sich durch Eye-Tracking-Geräten präzise und unmittelbar nachvollziehen. Dieser Beitrag konzeptualisiert den kombinierten Einsatz der beiden apparativen Messansätze für Emotion und Aufmerksamkeit, um für die User-Experience-Forschung einen deutlichen Mehrwert zu schaffen. Hierfür werden anhand zweier empirischer Studien Vor- und Nachteile der spezi- fischen Methoden aufgezeigt und eine komplementäre Integration der Methoden vorgeschlagen. Y1 - 2020 U6 - https://doi.org/10.15459/95451.43 SN - 2509-3029 VL - 2020 IS - 1 SP - 99 EP - 110 ER - TY - CHAP A1 - Ziemann, Olaf ED - Fahlbusch, Thomas T1 - Ferngespeiste optische Sensoren T2 - Tagungsband des 3. Deutsches POF-Symposium KW - Optische Polymerfaser Y1 - 2020 SN - 9783959004428 VL - 2020 PB - Tewiss CY - Hannover ER - TY - CHAP A1 - Götzelmann, Timo A1 - Kreimeier, Julian T1 - Participation of elderly people in smart city planning by means of virtual reality T2 - Proceedings of the 13th ACM International Conference on PErvasive Technologies Related to Assistive Environments N2 - Urbanisation is progressing, the population in many countries has a growing proportion of old people. This must be taken into account when transforming urban environments into Smart Cities. On the one hand, general accessibility rules must be taken into account in the planning of buildings and urban environments. However, an essential requirement for transformation is the participation of citizens, i.e., concrete suggestions for improvement from citizen should be taken into account. Elderly people are a valuable source of information for improvements. Instead of simply involving them in the modification of existing facilities, our approach suggests that they should be included in the planning process. However, abstract plans and questionnaires allow only limited insights for ordinary citizen. Therefore, our approach aims at providing a suitable interface to interactively walk through and annotate virtual reality plans for buildings and city districts. We present a working prototype for elderly people based on 3D consumer hardware appropriate form of locomotion with which they can explore and annotate urban planning according to their individual needs. Y1 - 2020 U6 - https://doi.org/10.1145/3389189.3397649 SP - 1 EP - 2 PB - ACM CY - New York, NY, USA ER - TY - CHAP A1 - Kreimeier, Julian A1 - Kappe, Maximilian A1 - Götzelmann, Timo T1 - BlindScanLine BT - preliminary implementation and evaluation of a cross-platform line scanning sonification approach using frequency and amplitude modulation T2 - Proceedings of the 13th ACM International Conference on PErvasive Technologies Related to Assistive Environments N2 - Sonification is a promising way for blind and visually impaired people to capture and process information purely auditory, e.g., by mapping distance metrics on sound characteristics. To optimally use the users' sensory bandwidth and cognitive load a sequential scanning at multiple azimuth angles instead of only one measuring point straight ahead could be a suitable option. Thus, we present a preliminary cross-platform implementation and evaluation of such a sequential 'line-scanning sonification' using off-the-shelf components while comparing frequency (FM) and amplitude modulation (AM). In our user study with blindfolded and visually impaired participants, users gained a more accurate mental model in significantly shorter time by means of FM compared to AM and the HoloLens' usability was rated better than our LIDAR prototype's. These initial findings show possibilities for further improvement, so that similar approaches could be used more and better in blind and visually impaired peoples' everyday life. Y1 - 2020 U6 - https://doi.org/10.1145/3389189.3393742 SP - 1 EP - 4 PB - ACM CY - New York, NY, USA ER - TY - CHAP A1 - Kreimeier, Julian A1 - Karg, Pascal A1 - Götzelmann, Timo T1 - BlindWalkVR BT - formative insights into blind and visually impaired people's VR locomotion using commercially available approaches T2 - Proceedings of the 13th ACM International Conference on PErvasive Technologies Related to Assistive Environments N2 - Virtual Reality (VR) promises expanded access to spatial information, especially for blind and visually impaired people. Through haptic and acoustic feedback, real world's limitations like the risk of injury or the necessity of a sighted safety assistant can be circumvented. However, the best possible profit of this technology requires interactive locomotion in large virtual environments to overcome real world space limitations. Thus, we present formative insights of blind people's egocentric VR locomotion by comparing four different implementations (i.e., two VR treadmills, trackers on the ankles or joystick based locomotion) in a qualitative and quantitative user study with seven blind and visually impaired participants. Our results reveal novel insights on characteristics of each implementation in terms of usability and practicability and also provide recommendations for further work in this field with the target user group in sight. Y1 - 2020 U6 - https://doi.org/10.1145/3389189.3389193 SP - 1 EP - 8 PB - ACM CY - New York, NY, USA ER - TY - CHAP A1 - Götzelmann, Timo A1 - Kreimeier, Julian T1 - Towards the inclusion of wheelchair users in smart city planning through virtual reality simulation T2 - Proceedings of the 13th ACM International Conference on PErvasive Technologies Related to Assistive Environments N2 - The planning of Smart Cities is a complex task. In particular, accessibility rules based on legal regulations but also on empirical values must be observed. However, it is difficult to determine in advance the exact needs of people with disabilities for concrete planning. Previous approaches mainly aimed at existing urban environments. Ideally, citizens should be directly involved in the planning process of buildings and urban environments. For existing urban environments, crowdsourcing approaches exist to obtain suggestions for improvement from citizens. We present a novel approach for the direct integration of wheelchair users in the urban environments to be planned (participatory urban development) in virtual reality. We present an easy-to-reproduce simulator that allows wheelchair users to directly explore the planned buildings and urban environments in a virtual, spatial environment. This means that these 3D models can be commented already in the planning phase and provide valuable information about accessibility. Y1 - 2020 U6 - https://doi.org/10.1145/3389189.3398008 SP - 1 EP - 7 PB - ACM CY - New York, NY, USA ER - TY - RPRT A1 - Bogdanski, Ralf T1 - Vorläufiger Abschlussbericht der Forschungsprojekte LEV@KEP & VALUE@SERVICE N2 - Ziel des Projekts „LEV@KEP – Entwicklung eines zulassungsfreien Light Electric Vehicle für eine Nachhaltige Stadtlogistik“ (07/2017 bis 12/2019)“ war es, ein Schwerlastenrad bzw. Light Electric Vehicle zu entwickeln, das für den gewerblichen und den KEP-Einsatz geeignet ist. Das qualitativ hochwertige und zuverlässige neue Lastenfahrzeug soll das erfolgreiche Mikro-Depot-Konzept unterstützen und bereits vorhandene Lastenräder ersetzen. Durch das neue Fahrzeug wird die Zustellung von Paketen und auch der Transport anderer Güter verbessert werden. Im Teilprojekt „VALUE@SERVICE – Nachhaltige Logistische Mehrwertdienste für den stationären Einzelhandel und für Apotheken durch kooperative Ressourcennutzung in logistischen Netzwerken“ (07/2017–12/2019) wurde die Realisierungschance von logistischen Mehrwertdiensten durch gewerbliche Lastenradlogistik mit dem Mikro-Depot-Konzept geprüft. Das Projekt sollte das Mikro-Depot-Konzept um Same-Day-Delivery für den Einzelhandel und Apotheken, Next-Day-Delivery vom Einzelhandel zu überregionalen Kunden und Retourenabwicklung im Onlinehandel erweitern. Ziel waren abgestimmte Nutzungskonzepte, mithilfe derer die Unternehmen DPD, Tiramizoo und Sanacorp zur optimalen Nutzung vorhandener Netzwerkressourcen. So sollte der Lieferverkehr durch getaktete Versandzeiten, gemeinsam genutzte Depots und zusammengelegte Auslieferungen effizienter werden. Um diese Anwendung zu realisieren, wurden die Gemeinsamkeiten und Unterschiede in den logistischen Anforderungen und Sendestrukturen geprüft. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-26223 PB - Technische Hochschule Nürnberg CY - Nürnberg ER - TY - CHAP A1 - Götzelmann, Timo A1 - Kreimeier, Julian T1 - Optimization of navigation considerations of people with visual impairments through ambient intelligence BT - a case study N2 - As urbanization progresses, cities are becoming increasingly complex. To make this complexity advantageous, Smart Cities integrate intelligent sensors that communicate with each other and are invisible to citizens, so that they can offer additional services. Despite the fact that the inclusion of diverse citizens is an essential requirement of Smart Cities, Ambient Intelligence is often not considered under accessibility aspects. The central question in this context is how disadvantaged groups in particular can benefit from Smart Cities. It is extremely important for people with disabilities to be able to move autonomously in public spaces. For this purpose, however, people who are blind sometimes need to be able to ask other people for directions. Knowing whether people are present can be important information. In our exemplary case study, Ambient Intelligence is used for people with visual impairments, so that they can decide whether they want to go to this or an alternative place based on the information about the density of people in a place. Y1 - 2020 U6 - https://doi.org/10.1145/3389189.3398009 SP - 1 EP - 6 PB - ACM CY - New York, NY, USA ER - TY - CHAP A1 - Saur, Gregor A1 - Kruglov, Roman A1 - Engelbrecht, Rainer T1 - Microsecond Optical Frequency Tuning of DFB Laser Diodes for Coherent Optical Frequency Domain Reflectometry N2 - Optical frequency tuning ranges up to 600 GHz or 4.8 nm have been achieved within microseconds and a standard telecom DFB laser diode operating at 1550 nm. The dynamic optical frequency tuning is induced by electrical current pulse injection and measured using an interferometric setup. Potentially, low-cost sensor systems based on optical coherence tomography (OCT) or coherent optical frequency domain reflectometry (c-OFDR) could be realized, achieving sub-mm two-point range resolution or even better single-point range precision within a few microseconds for a single measurement. KW - Tunable lasers KW - Semiconductor lasers KW - Wavelength shift KW - Fiber sensing Y1 - 2020 SN - 978-3-9819376-2-6 U6 - https://doi.org/10.5162/SMSI2020/C6.2 VL - 2020 SP - 189 EP - 190 PB - AMA Service GmbH CY - Wunstorf, Germany ER - TY - CHAP A1 - Boost, Marie A1 - Promberger, Markus A1 - Meier, Lars A1 - Sowa, Frank ED - Boost, Marie ED - Dagg, Jenny ED - Gray, Jane ED - Promberger, Markus T1 - Developing the concept of poverty and resilience T2 - Poverty, Crisis and Resilience N2 - This chapter focuses on an elaborated understanding of the concept of social resilience and its potential to enrich research on poverty and social policy. The history of this concept is shown by tracing its development from a psychological, ecosystemic and socio-spatial perspective - focusing on spatial and social limitations of resilience. The current approach of social resilience derives from this background and emphases resilience as a dynamic process, embedded in social and institutional structures. Arising from this discussion, several elements of a new definition of social resilience are presented. Social resilience, especially within the context of poverty, is based on different sources, such as available common goods, reliable networks or civil society organisations. Our results show that the impact of social resilience is highly preconditioned, relates to different characteristics across our respondents and needs support of the welfare state and charity organisations to fully exploit its potential. Y1 - 2020 SN - 9781788973205 U6 - https://doi.org/10.4337/9781788973205.00013 PB - Edward Elgar Publishing ER - TY - JOUR A1 - Sowa, Frank A1 - Rösch, Benedikt ED - Oberbeck, Niels T1 - Wohnungslose Menschen in Figurationen N2 - In einer Machbarkeitsstudie erforschte das Projektteam, inwiefern der Begriff der Figuration (Elias) geeignet ist, um bislang nicht berücksichtigte oder unentdeckte Aspekte des sozialen Phänomens Wohnungslosigkeit sichtbar zu machen und in für die Praxis anwendbare Erkenntnisse zu transformieren. Mit diesen Ergebnissen sollten weitere Mittel für ein mindestens zweijähriges Forschungsprojekt eingeworben werden. T3 - Vorlaufforschung / Schriftenreihe der Georg-Simon-Ohm-Hochschule, Nürnberg - 2019/2020 Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-22505 SN - 2626-7616 SP - 211 EP - 218 PB - Ohm CY - Nürnberg ER - TY - JOUR A1 - Sowa, Frank A1 - Rösch, Benedikt A1 - Holzmeyer, Tanja A1 - Neberich, Marcel A1 - Opferkuch, Frank A1 - Proschek, Katrin A1 - Reindl, Richard A1 - Scheja, Joachim A1 - Zauter, Sigrid T1 - Digitalisierung für alle? Zur Auswirkung digitaler Angebote auf Teilhabechancen von Wohnungslosen JF - Soziale Passagen N2 - Das an der Technischen Hochschule Nürnberg Georg Simon Ohm angesiedelte Forschungsprojekt „SIWo – Smart Inklusion für Wohnungslose“ widmet sich der Fragestellung, welche Informations‑, Unterstützungs- und Beratungsbedarfe bei wohnungslosen Menschen vorliegen und in welcher Form sich die Teilhabechancen für die heterogene Zielgruppe wohnungsloser oder von Wohnungsnot betroffener Menschen mittels digitaler Hilfe und Beratungsangebote verbessern lassen. Hierfür werden zum einen mit Gruppendiskussionen und qualitativen Interviews Bedarfe identifiziert. Zum anderen sollen im Rahmen des Projekts prototypische Lösungsansätze in Form einer plattformübergreifenden Hilfe-App entwickelt, getestet und mit Evaluationsverfahren begleitet werden. Charakteristisch ist dabei die enge interdisziplinäre Zusammenarbeit zwischen Sozialwissenschaft, Informatik und Energietechnik, die partizipative Begleitung des Projekts durch Wohnungslose und andere Stadtakteur*innen, sowie der Fokus auf interaktive Funktionen, die digitalisierte Begegnungsräume ermöglichen und Interaktionen auch zwischen Bevölkerungs-gruppen fördern, die i. d. R. eher wenig miteinander zu tun haben. Dieses Vorgehen begreift somit Wohnungslosigkeit nicht ausschließlich als professionelles Arbeitsfeld der Sozialen Arbeit, sondern als gesamtgesellschaftliche Aufgabe. KW - Wohnungslosigkeit · Vulnerabilität · Bedarfe · Soziale Arbeit · Digitalisierung Y1 - 2020 U6 - https://doi.org/10.1007/s12592-020-00338-1 SN - 1867-0180 VL - 12 IS - 1 SP - 185 EP - 190 PB - Springer Science and Business Media LLC ER - TY - CHAP A1 - Degen, Katrin ED - Britta, Hoffarth ED - Susanne, Richter ED - Eva, Reuter T1 - "Wichtige Verbündete im Kampf" - Zugehörigkeitskonstruktionen (extrem) rechter Akteur*innen entlang geschlechts- und sexualitätsbezogener Faktoren BT - Räume, Deutungen, Repräsentationen T2 - Geschlecht und Medien KW - Rechtsextremismus KW - Geschlecht KW - Antifeminismus KW - Ethnosexismus Y1 - 2020 SN - 9783593512938 PB - Campus CY - Frankfurt am Main ER - TY - CHAP A1 - Auernhammer, Katja A1 - Tavakoli Kolagari, Ramin T1 - Workshop for Automotive Software Systems Engineering Education T2 - 2020 IEEE 32nd Conference on Software Engineering Education and Training (CSEE&T) N2 - In view of the advent of autonomous driving, the automotive industry is longing for adequately trained employees in a wide range of fields; these include not so much the classic automotive engineering and embedded systems topics, but rather software development, robotics, machine learning, statistics and design. As a particularly specific, industry-oriented discipline, automotive software engineering is hardly represented in academic teaching, except for a few AUTOSAR courses. But as a beacon project of digitization, autonomous driving can arouse broad interest among students who are interested in how diverse disciplines can be profitably combined to realize an impressive project. This interest is an excellent chance for both universities and industry to engage in constructive dialogue, to carry out exciting multidisciplinary projects at universities and to meet the needs of industry with graduates who have a relevant and versatile education. This workshop provides an opportunity for both sides to meet, share requirements and experiences and develop a best practice course according to industry requirements and academic feasibility. KW - Automotive engineering , Software engineering , Industries , Education , Conferences , Machine learning , Automobiles Y1 - 2020 U6 - https://doi.org/10.1109/CSEET49119.2020.9206169 PB - IEEE ER - TY - CHAP A1 - Freiling, Felix A1 - Tavakoli Kolagari, Ramin A1 - Auernhammer, Katja T1 - Efficient Black-Box Search for Adversarial Examples using Relevance Masks T2 - Proceedings of the 2020 Workshop on DYnamic and Novel Advances in Machine Learning and Intelligent Cyber Security N2 - Machine learning classifiers for image recognition are prevalent in many applications. We study the problem of finding adversarial examples for such classifiers, i.e., to manipulate the images in such a way that they still look like the original images to a human but are misinterpreted by the classifier. Finding adversarial examples corresponds to a search problem in the image space. We focus on black-box attacks that can only use the original classifier to guide the search. The challenge is not to find adversarial examples, but rather to find them efficiently, ideally in real time. We show two novel methods that increase the efficiency of black-box search algorithms for adversarial examples: The first uses a relevance mask, i.e., a bitmask on the original image that restricts the search to those pixels that appear to be more relevant to the attacked classifier than others. The second exploits the discovery of merge drift, a phenomenon that negatively affects search algorithms that are based on the merging of image candidates. We evaluate both concepts on existing and new algorithms. KW - Machine Learning, Attacks, Adversarial Examples, Relevance Masks Y1 - 2022 U6 - https://doi.org/10.1145/3477997.3478013 SP - 1 EP - 12 PB - ACM CY - New York, NY, USA ER - TY - JOUR A1 - Biedermann, Till M. A1 - Reich, M. A1 - Paschereit, C. O. T1 - Multi-Objective Modeling of Leading-Edge Serrations Applied to Low-Pressure Axial Fans JF - Journal of Engineering for Gas Turbines and Power N2 - A novel modeling strategy is proposed which allows high-accuracy predictions of aerodynamic and aeroacoustic target values for a low-pressure axial fan, equipped with serrated leading edges. Inspired by machine learning processes, the sampling of the experimental space is realized by use of a Latin hypercube design plus a factorial design, providing highly diverse information on the analyzed system. The effects of four influencing parameters (IP) are tested, characterizing the inflow conditions as well as the serration geometry. A total of 65 target values in the time and frequency domains are defined and can be approximated with high accuracy by individual artificial neural networks. Furthermore, the validation of the model against fully independent test points within the experimental space yields a remarkable fit, even for the spectral distribution in 1/3-octave bands, proving the ability of the model to generalize. A metaheuristic multi-objective optimization approach provides two-dimensional Pareto optimal solutions for selected pairs of target values. This is particularly important for reconciling opposing trends, such as the noise reduction capability and aerodynamic performance. The chosen optimization strategy also allows for a customized design of serrated leading edges, tailored to the specific operating conditions of the axial fan. KW - Acoustics KW - Artificial neural networks KW - Blades KW - Design KW - Fans KW - Flow (Dynamics) KW - Modeling KW - Noise control KW - Optimization KW - Pareto optimization KW - Pressure KW - Turbulence KW - Noise (Sound) KW - Rotors KW - Signals KW - Wavelength Y1 - 2020 U6 - https://doi.org/10.1115/1.4048599 SN - 0742-4795 VL - 142 IS - 11 PB - ASME International ER - TY - CHAP A1 - Scholz, Stefanie A1 - Winkler, Christian T1 - How to Engage Followers: Classifying Fashion Brands According to Their Instagram Profiles, Posts and Comments T2 - Computer Science & Information Technology (CS & IT) N2 - In this article we show how fashion brands communicate with their follower on Instagram. We use a continuously update dataset of 68 brands, more than 300,000 posts and more than 40,000,000 comments. Starting with descriptive statistics, we uncover different behavior and success of the various brands. It turns out that there are patterns specific to luxury, mass-market and sportswear brands. Posting volume is extremely brand dependent as is the number of comments and the engagement of the community. Having understood the statistics, we turn to machine learning techniques to measure the response of the community via comments. Topic models help us understand the structure of their respective community and uncover insights regarding the response to campaigns. Having up-to-date content is essential for this kind of analysis, as the market is highly volatile. Furthermore, automatic data analysis is crucial to measure the success of campaigns and adjust them accordingly for maximum effect. KW - Instagram, Fashion Brands, Data Extraction, Marketing, Analysis, Artificial Intelligence, Netnography, Descriptive Statistics, Visualization, Community Engagement, Artificial Intelligence, Unsupervised Learning, Topic Modelling Y1 - 2020 U6 - https://doi.org/10.5121/csit.2020.101704 SP - 223 EP - 234 PB - AIRCC Publishing Corporation ER - TY - CHAP A1 - Dalferth, Jasmin A1 - Winkelmann, Sven A1 - Schwenker, Friedhelm T1 - Using Mask R-CNN for Image-Based Wear Classification of Solid Carbide Milling and Drilling Tools T2 - Artificial Neural Networks in Pattern Recognition N2 - In order to ensure high productivity and quality in industrial production, early identification of tool wear is needed. Within the context of Industry 4.0, we integrate wear monitoring of solid carbide milling and drilling cutters automatically into the production process. Therefore, we propose to analyze wear types with image instance segmentation using Mask R-CNN with feature pyramid and bounding box regression. Our approach is able to recognize the five most important wear types: flank wear, crater wear, fracture, built-up edge and plastic deformation. While other methods use image classification and classify only one wear type for each image, our model is able to detect multiple wear types. Over 35 models with different hyperparameter settings were trained on 5,000 labeled images to establish a reliable classifier. The results show up to 82.03% accuracy and benefit for overlapping wear types, which is crucial for using the model in production. Y1 - 2020 SN - 9783030583088 U6 - https://doi.org/10.1007/978-3-030-58309-5_18 SN - 0302-9743 SP - 223 EP - 234 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Mohan, Abhinav A1 - Ulmer, Ulrich A1 - Hurtado, Lourdes A1 - Loh, Joel A1 - Li, Young Feng A1 - Tountas, Athanasios A. A1 - Krevert, Carola A1 - Chan, Chakyu A1 - Liang, Yilei A1 - Brodersen, Peter A1 - Sain, Mohini M. A1 - Ozin, Geoffrey A. T1 - Hybrid Photo- and Thermal Catalyst System for Continuous CO2 Reduction JF - ACS Applied Materials & Interfaces N2 - Heterogeneous thermal catalytic processes are vital for industrial production of fuels, fertilizers, and other chemicals necessary for sustaining human life. However, these processes are highly energy-intensive, requiring a vast consumption of fossil fuels. An emerging class of heterogeneous catalysts that are thermally driven but also exhibit a photochemically enhanced rate can potentially reduce process energy intensity by partially substituting conventional heat (where fossil fuels are needed) with solar energy. Such catalyst systems have yet to be practically utilized. Here, we demonstrate a compact electrically heated photo- and thermal annular reactor module to reduce CO2 to CO, via the reverse water gas shift reaction. A first-principles-based design approach was taken in developing a SiO2 on an Al photo- and thermal catalyst system for the model photo- and thermal indium oxide hydroxide (In2O3–x(OH)y) catalysts. A 5-fold light enhancement in the CO production rate and over 70 h of stable CO production were achieved. This represents the highest light enhancement effect reported for this model photocatalyst to date. The reactor presented herein allows continuous operation and a significant reduction of 31% in heater power consumption when provided with an additional 2 suns of irradiation, demonstrating the strong photo- and thermal-harvesting performances of the catalyst system developed in this work. Y1 - 2020 U6 - https://doi.org/10.1021/acsami.0c06232 SN - 1944-8244 VL - 12 IS - 30 SP - 33613 EP - 33620 PB - American Chemical Society (ACS) ER - TY - CHAP A1 - Voit, Thomas A1 - Schneider, Alexander A1 - Kriegbaum, Mathias T1 - Towards an Empirically Based Gamification Pattern Language using Machine Learning Techniques N2 - The ineffectiveness of many gamification projects can be attributed to wrong decisions made during the conceptual design phase, especially in the selection of game design elements. This paper introduces a data driven method of creating a gamification pattern language similar to software design patterns to help gamification designers select such elements. Thanks to modern machine learning technologies such a pattern language can be based on a comprehensive empirical analysis to assess the actual use of game design elements in games. This paper is the first report on an ongoing research project that has been carried out since the beginning of 2017 in cooperation with the German Games Archive to extract game design elements from more than 30,000 board games using machine learning techniques. Initial tests based on support vector classification and 4,000 games show that game design elements can be reliably identified with accuracy rates between 80 and 90%. KW - Gamification, Game Design, Pattern Language, Machine Learning Y1 - 2020 U6 - https://doi.org/10.1109/cseet49119.2020.9206223 SN - 2377-570X PB - IEEE ER - TY - JOUR A1 - Guo, Jiuli A1 - Duchesne, Paul N. A1 - Wang, Lu A1 - Song, Rui A1 - Xia, Meikun A1 - Ulmer, Ulrich A1 - Sun, Wei A1 - Dong, Yuchan A1 - Loh, Joel Y. Y. A1 - Kherani, Nazir P. A1 - Du, Jimin A1 - Zhu, Baolin A1 - Huang, Weiping A1 - Zhang, Shoumin A1 - Ozin, Geoffrey A. T1 - High-Performance, Scalable, and Low-Cost Copper Hydroxyapatite for Photothermal CO2 Reduction JF - ACS Catalysis Y1 - 2020 U6 - https://doi.org/10.1021/acscatal.0c03806 SN - 2155-5435 VL - 10 IS - 22 SP - 13668 EP - 13681 PB - American Chemical Society (ACS) ER - TY - JOUR A1 - Eisenlauer, Moritz A1 - Teipel, Ulrich T1 - Comminution of Wood – Influence of Process Parameters JF - Chemical Engineering & Technology N2 - An essential element for sustainable use of renewable resources is an efficient comminution process for which the relation between energy input and size reduction is of great importance. Fine comminution of beech, oak, and spruce wood chips in cutting and hammer mills at different moisture content levels is investigated. The influence of the different process parameters as well as the size reduction performed by the hammer and cutting mill on the specific comminution energy is reported and the particulate properties of the comminution products are reported. Considering the energy requirements, functional relations were derived from the experimental results, which describe the relation between comminution energy and size reduction. Y1 - 2020 U6 - https://doi.org/10.1002/ceat.201900488 SN - 0930-7516 VL - 43 IS - 5 SP - 838 EP - 847 PB - Wiley ER - TY - JOUR A1 - Teipel, Ulrich T1 - Aufbereitung von Sekundärrohstoffen der Bau- und Keramikindustrie JF - Keramische Zeitschrift Y1 - 2020 U6 - https://doi.org/10.1007/s42410-020-0130-3 SN - 0023-0561 VL - 72 IS - 3 SP - 36 EP - 42 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Dresel, Alexander A1 - Teipel, Ulrich T1 - Jet Dispersion of Multiwall Carbon Nanotubes and Correlation with Suspension Rheology JF - Chemical Engineering & Technology N2 - A novel jet dispersion technique was developed and investigated which enabled excellent carbon nanotube (CNT) dispersion by high exfoliation at even very low pressure drops. Suitable procedures were developed for the characterization of agglomerate size and fraction of individual CNTs. The appropriate characterization enabled the definition of a dimensionless dispersing parameter and the development of a kinetic model that describes CNT dispersion in dependence of the volumetric energy input. The rheological behavior of CNT suspensions in steady‐shear flows was investigated and demonstrated how the agglomerate fracture and CNT individualization influence the suspension viscosity. Y1 - 2020 U6 - https://doi.org/10.1002/ceat.201900534 SN - 0930-7516 VL - 43 IS - 5 SP - 869 EP - 878 PB - Wiley ER - TY - JOUR A1 - Chairopoulou, Makrina A. A1 - Kratzer, Fabian A1 - Groß, Roland A1 - Herrmann, Michael A1 - Teipel, Ulrich T1 - Influence of the Temperature on Coccolith‐Containing Systems from Emiliania huxleyi Cultivations JF - Chemical Engineering & Technology N2 - Thermogravimetric analysis of a coccolith‐containing biogenic broth showed a three‐step degradation process. According to this system behavior, the biogenic broth was heated to specific temperatures and characterized in terms of its morphology, surface chemistry, and crystallinity. The elemental and organic composition of the treated samples was also evaluated and compared to the reference material. The presented results were acquired in an effort to exploit pretreatment scenarios for such a biogenic system that would improve and support a separation process. Y1 - 2020 U6 - https://doi.org/10.1002/ceat.201900507 SN - 0930-7516 VL - 43 IS - 5 SP - 904 EP - 912 PB - Wiley ER - TY - JOUR A1 - Seiler, Elisa A1 - Urban, Helfried A1 - Teipel, Ulrich T1 - Mikrowellenpyrolyse von carbonfaserhaltigen Kunststoffen als Recyclingoption JF - Chemie Ingenieur Technik N2 - Herausforderungen bei der Etablierung einer Circular Economy von carbonfaservertärkten Kunststoffen (CFK) ergeben sich insbesondere durch die nötige, jedoch problematische Trennung des Faser‐Matrix‐Verbunds. Das Pyrolyseverfahren stellt eine mögliche, bereits industriell umgesetzte, Technologie zur Verbundtrennung dar. Eine Weiterentwicklung ist die mikrowellenunterstütze Pyrolyse, bei der das CFK‐Material durch die Mikrowellen aufgeheizt und so die Faser freigelegt wird. Prozessgrundlagen und Einflüsse auf die Faser‐Matrix‐Trennung werden im vorliegenden Beitrag betrachtet. T2 - Microwave Pyrolysis of Carbon-Fiber-Reinforced Plastics as Recycling Option Y1 - 2020 U6 - https://doi.org/10.1002/cite.201900133 SN - 0009-286X VL - 92 IS - 4 SP - 469 EP - 475 PB - Wiley ER - TY - CHAP A1 - Weers, Martin A1 - Wollmann, Annett A1 - Teipel, Ulrich A1 - Weber, Alfred P. T1 - Dynamics of Separation Characteristics of Sieving and Flow Classification Processes T2 - Dynamic Flowsheet Simulation of Solids Processes Y1 - 2020 SN - 9783030451677 U6 - https://doi.org/10.1007/978-3-030-45168-4_10 SP - 349 EP - 390 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Fehn, Thomas A1 - Teipel, Ulrich T1 - Werkstoffliche Aufbereitung von Wärmedämmverbundsystemen JF - Chemie Ingenieur Technik N2 - Aufgrund steigender energetischer Anforderungen an Gebäude, werden Wärmedämmverbundsysteme (WDVS) seit den 1970 Jahren zur Dämmung von Gebäudefassaden verwendet. Angesichts der Langlebigkeit dieser Kompositmaterialien fallen seit den letzten Jahren vermehrt WDVS‐Abfälle an. Eine werkstoffliche Verwertung dieser Systeme existiert aktuell noch nicht, wodurch ein enormes Ressourceneffizienzpotenzial verloren geht. Aufgrund der Komplexität dieser Kompositmaterialien wurden im Rahmen dieser Arbeit Wärmedämmverbundsysteme durch verfahrenstechnische Prozessschritte aufbereitet. T2 - Preparation of Thermal Insulation Composite Systems Y1 - 2020 U6 - https://doi.org/10.1002/cite.201900124 SN - 0009-286X VL - 92 IS - 4 SP - 431 EP - 440 PB - Wiley ER - TY - JOUR A1 - Teipel, Ulrich A1 - Wolf, Sebastian A1 - Schreiber, Alex T1 - Durchgangswiderstand von partikulären Systemen JF - Chemie Ingenieur Technik N2 - Die elektrischen Eigenschaften von Partikeln insbesondere der Durchgangswiderstand von Partikelschüttungen haben in vielen verfahrenstechnischen Prozessen, bei der Produktqualifizierung oder dem Brand‐ und Explosionsschutz eine entscheidende Bedeutung. Da sich der Ladungstransport in einem dispersen System von dem in einem homogenen Festkörper unterscheidet, ist der Durchgangswiderstand entscheidend von den Produkteigenschaften der Partikel und des Fluids abhängig. Im Rahmen dieser Arbeit wurde die Abhängigkeit des Durchgangswiderstandes von der inneren Struktur der Schüttung, der relativen Feuchtigkeit, der Konditionierungszeit bei unterschiedlichem Klima und der mittleren Partikelgröße in einer konzentrischen Messzelle untersucht. T2 - Electrostatic Resistance of Particulate Systems Y1 - 2020 U6 - https://doi.org/10.1002/cite.201800141 SN - 0009-286X VL - 92 IS - 3 SP - 229 EP - 237 PB - Wiley ER - TY - JOUR A1 - Chairopoulou, Makrina A. A1 - Schreiber, Alex A1 - Kratzer, Fabian A1 - Wolf, Sebastian A1 - Teipel, Ulrich T1 - Recycling von marinen Sekundärrohstoffen JF - Chemie Ingenieur Technik N2 - Austernschalen stellen als Abfallprodukt eine große Umweltbelastung dar und die Wiederverwendung des Materials gewinnt zunehmend an Bedeutung. Da der Zerkleinerungsprozess beim Recycling von Sekundärrohstoffen die Eigenschaften des Materials definiert, wurden Austernschalen mit einer Planetenkugelmühle und einer Schlagradmühle zerkleinert und die gewonnenen Fraktionen in Bezug auf Größe und Form analysiert und miteinander verglichen. Ein Zerkleinerungsmaterial der Schlagradmühle wurde für eine Reihe von Benetzungsversuchen verwendet, die dazu beitrugen, die freie Oberflächenenergie des Materials nachzuweisen. KW - Recycling ; Marine Rohstoffe ; Zerkleinerung ; comminution ; marine raw materials ; Oyster Shells ; Austernschale Y1 - 2020 U6 - https://doi.org/10.1002/cite.201900128 SN - 0009-286X VL - 92 IS - 4 SP - 405 EP - 413 PB - Wiley ER - TY - JOUR A1 - Pieper, Maximilian A1 - Michalke, Amelie A1 - Gaugler, Tobias T1 - Calculation of external climate costs for food highlights inadequate pricing of animal products JF - Nature Communications N2 - Although the agricultural sector is globally a main emitter of greenhouse gases, thorough economic analysis of environmental and social externalities has not yet been conducted. Available research assessing agricultural external costs lacks a differentiation between farming systems and food categories. A method addressing this scientific gap is established in this paper and applied in the context of Germany. Using life-cycle assessment and meta-analytical approaches, we calculate the external climate costs of foodstuff. Results show that external greenhouse gas costs are highest for conventional and organic animal-based products (2.41€/kg product; 146% and 71% surcharge on producer price level), followed by conventional dairy products (0.24€/kg product; 91% surcharge) and lowest for organic plant-based products (0.02€/kg product; 6% surcharge). The large difference of relative external climate costs between food categories as well as the absolute external climate costs of the agricultural sector imply the urgency for policy measures that close the gap between current market prices and the true costs of food. Y1 - 2020 U6 - https://doi.org/10.1038/s41467-020-19474-6 SN - 2041-1723 VL - 11 IS - 1 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Santillán‐Saldivar, Jair A1 - Gaugler, Tobias A1 - Helbig, Christoph A1 - Rathgeber, Andreas A1 - Sonnemann, Guido A1 - Thorenz, Andrea A1 - Tuma, Axel T1 - Design of an endpoint indicator for mineral resource supply risks in life cycle sustainability assessment BT - The case of Li‐ion batteries JF - Journal of Industrial Ecology N2 - Good management requires proper measurement, yet little is known about anthropogenic climate effects of agriculture. To remedy this, a precise measurement of negative externalities is urgently needed. Therefore, the authors of this article describe the heterogeneity of results from previous studies on climate effects and – focusing on the agricultural sector – identify reasons for this phenomenon. The authors conduct a meta-regression analysis, based on 53 primary studies that cover the period between 1951 and 2015. All countries or country groups are included in the 1345 reported results on emitted amounts of CO2e and SO2e. Our findings confirm the well-known result that an increase in livestock quantities corresponds with a significant increase in emission levels. By integrating culture-related country data, the authors conclude that the level of “humane orientation” and the amounts of emissions follow opposite courses. Furthermore, studies conducted while the first author of this study was working for an NGO, report significantly higher emissions. Based on an adaptation of a meta-regression analysis to the field of environmental performance measurement, we are able to provide new insights about the influence of the change of individual drivers on the emission level. Examples of these insights include a one-third increase in cattle stock is associated with an increase in emissions of 29.45 t/km2. We also find that publications where the first author works for an NGO reported an emission level 87.04 t/km2 higher than other publications. These findings enable the identification of the main drivers of emissions, while helping to explain the heterogeneity of existing studies. Based on the findings of this study, companies can take reliable measures to reduce the external climate effects of their products. Y1 - 2020 U6 - https://doi.org/10.1111/jiec.13094 SN - 1088-1980 VL - 25 IS - 4 SP - 1051 EP - 1062 PB - Wiley ER - TY - JOUR A1 - Gaugler, Tobias A1 - Stoeckl, Stefan A1 - Rathgeber, Andreas W. T1 - Global climate impacts of agriculture: A meta-regression analysis of food production JF - Journal of Cleaner Production N2 - Good management requires proper measurement, yet little is known about anthropogenic climate effects of agriculture. To remedy this, a precise measurement of negative externalities is urgently needed. Therefore, the authors of this article describe the heterogeneity of results from previous studies on climate effects and – focusing on the agricultural sector – identify reasons for this phenomenon. The authors conduct a meta-regression analysis, based on 53 primary studies that cover the period between 1951 and 2015. All countries or country groups are included in the 1345 reported results on emitted amounts of CO2e and SO2e. Our findings confirm the well-known result that an increase in livestock quantities corresponds with a significant increase in emission levels. By integrating culture-related country data, the authors conclude that the level of “humane orientation” and the amounts of emissions follow opposite courses. Furthermore, studies conducted while the first author of this study was working for an NGO, report significantly higher emissions. Based on an adaptation of a meta-regression analysis to the field of environmental performance measurement, we are able to provide new insights about the influence of the change of individual drivers on the emission level. Examples of these insights include a one-third increase in cattle stock is associated with an increase in emissions of 29.45 t/km2. We also find that publications where the first author works for an NGO reported an emission level 87.04 t/km2 higher than other publications. These findings enable the identification of the main drivers of emissions, while helping to explain the heterogeneity of existing studies. Based on the findings of this study, companies can take reliable measures to reduce the external climate effects of their products. KW - External effects Food production Global climate impacts Meta-regression analysis Y1 - 2020 U6 - https://doi.org/10.1016/j.jclepro.2020.122575 SN - 0959-6526 VL - 276 PB - Elsevier BV ER - TY - CHAP A1 - Aslansefat, Koorosh A1 - Sorokos, Ioannis A1 - Whiting, Declan A1 - Tavakoli Kolagari, Ramin A1 - Papadopoulos, Yiannis T1 - SafeML: Safety Monitoring of Machine Learning Classifiers Through Statistical Difference Measures T2 - Model-Based Safety and Assessment Y1 - 2020 SN - 9783030589196 U6 - https://doi.org/10.1007/978-3-030-58920-2_13 SN - 0302-9743 SP - 197 EP - 211 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Spiegelhalder, Kai A1 - Acker, Jens A1 - Baumeister, Harald A1 - Büttner-Teleaga, Antje A1 - Danker-Hopfe, Heidi A1 - Ebert, David D. A1 - Fietze, Ingo A1 - Frase, Lukas A1 - Klein, Sarah A1 - Lehr, Dirk A1 - Maun, Andy A1 - Mertel, Isabella A1 - Richter, Kneginja A1 - Riemann, Dieter A1 - Sauter, Cornelia A1 - Schilling, Claudia A1 - Schlarb, Angelika A. A1 - Specht, Markus A1 - Steinmetz, Lisa A1 - Weeß, Hans G. A1 - Crönlein, Tatjana T1 - Digitale Behandlungsangebote für Insomnie – eine Übersichtsarbeit JF - Somnologie N2 - ZusammenfassungDigital angebotene psychologische Interventionen gegen Schlafstörungen sind aktuell ein sehr intensiv bearbeitetes Forschungsthema. In dieser Übersichtsarbeit werden Originalarbeiten und Metaanalysen zu diesem Thema zusammengefasst. Hierbei zeigt sich, dass die internetbasierte kognitive Verhaltenstherapie für Insomnie (KVT-I) bei Erwachsenen durchweg sehr effektiv ist mit allenfalls leicht geringeren Effektstärken als die gleiche Behandlung mit physischer Präsenz von Therapeuten und Patienten. Behandlungseffekte zeigen sich dabei auch für sekundäre Outcome-Parameter wie Depressivität, Angst, Fatigue und Lebensqualität. Hingegen lassen die Forschung zur Wirksamkeit der internetbasierten KVT‑I bei Erwachsenen mit komorbiden psychischen Störungen oder körperlichen Erkrankungen sowie die Forschung zur Frage, wieviel Therapeutenkontakt in die Behandlung integriert werden sollte, anscheinend noch keine abschließenden Antworten zu. In diesen Bereichen scheint weitere Forschung notwendig zu sein scheint. Y1 - 2020 U6 - https://doi.org/10.1007/s11818-020-00238-9 SN - 1432-9123 VL - 24 IS - 2 SP - 106 EP - 114 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Richter, Kneginja A1 - Baumgärtner, Lisa A1 - Niklewski, Günter A1 - Peter, Lukas A1 - Köck, Melanie A1 - Kellner, Stefanie A1 - Hillemacher, Thomas A1 - Büttner-Teleaga, Antje T1 - Sleep disorders in migrants and refugees BT - a systematic review with implications for personalized medical approach JF - EPMA Journal Y1 - 2020 U6 - https://doi.org/10.1007/s13167-020-00205-2 SN - 1878-5077 VL - 11 IS - 2 SP - 251 EP - 260 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Richter, Kneginja A1 - Peter, Lukas A1 - Rodenbeck, Andrea A1 - Weess, Hans Günter A1 - Riedel-Heller, Steffi G. A1 - Hillemacher, Thomas T1 - Shiftwork and Alcohol Consumption BT - A Systematic Review of the Literature JF - European Addiction Research N2 - Shiftwork can be a risk factor for a number of different somatic and psychological health conditions, especially sleep disorders. Shiftworkers sleep less than dayworkers, and 20–40% of them suffer from difficulties initiating and maintaining sleep, which result in reduced capacity for work and social life. A common coping strategy might be the use of alcohol, which presents a health and safety hazard as it further impairs sleep quality and exacerbates sleepiness in the workplace. This review aimed to assess the extent of such possible connections. Y1 - 2020 U6 - https://doi.org/10.1159/000507573 SN - 1022-6877 VL - 27 IS - 1 SP - 9 EP - 15 PB - S. Karger AG ER - TY - JOUR A1 - Chatzitakis, Paris A1 - Safarov, Javid A1 - Opferkuch, Frank A1 - Dawoud, Belal A1 - Hassel, Egon T1 - Vapor pressures and activity coefficients of 2,2,2-trifluoroethanol in binary mixtures with 1,3-dimethyl-2-imidazolidinone and 2-pyrrolidone JF - Journal of Molecular Liquids N2 - The vapor pressures of two binary mixtures containing 2-trifluoroethanol (TFE) + 1,3-dimethyl-2-imidazolidinone (DMI) and TFE + 2-pyrrolidone (PYR), were investigated at temperatures T = (274.15 to423.15) K using two different static method installations. Both combinations were modelled using an extended Clausius-Clapeyron equation with concentration dependent parameters and the NRTL equation with temperature dependent parameters. The best fit was obtained using the NRTL equation. KW - 2-Trifluoroethanol 1,3-Dimethyl-2-imidazolidinone 2-Pyrrolidone Vapor pressure NRTL Clausius-Clapeyron Y1 - 2020 U6 - https://doi.org/10.1016/j.molliq.2020.112828 SN - 0167-7322 VL - 305 PB - Elsevier BV ER - TY - CHAP A1 - Koch, Philipp A1 - Engelhardt, Helmut A1 - May, Stefan A1 - Schmidpeter, Michael A1 - Ziegler, Jasmin A1 - Nüchter, Andreas T1 - Signed Distance Based Reconstruction for Exploration and Change Detection in Underground Mining Disaster Prevention T2 - 2020 IEEE International Symposium on Safety, Security, and Rescue Robotics (SSRR) N2 - This publication describes an application of a Truncated Signed Distance Mapping approach for disaster intervention in underground mine shafts through geometrical change detection of the shaft walls. The paper describes two main problems of such an approach (aligning two potentially huge point clouds and automatic change detection by comparing the reconstructed volumes) and explains in detail the proposed solution. KW - signed distance KW - stereo camera KW - underground mining KW - change detection Y1 - 2020 U6 - https://doi.org/10.1109/SSRR50563.2020.9292618 SP - 360 EP - 365 PB - IEEE ER - TY - JOUR A1 - Mammen, Jan T1 - Wealth creation through corporate diversification – the bondholders’ perspective JF - Investment Management and Financial Innovations N2 - The influence of corporate diversification on firm value is an important field in strategy research. Studies in strategic management and finance research have analyzed value creation through product and geographic diversification from a shareholder’s perspective. This study completes this picture by analyzing the bondholders’ perspective. It is suggested that product diversification creates value for bondholders, while geographic diversification destroys bondholder value. The hypotheses are tested on a sample of S&P 1,200 firms in 2001–2011 using a fixed-effects panel model. Drawing on prior research, bondholder value creation is measured using the Merton model. The empirical results support the hypothesis that bondholders gain value through product diversification but lose value through geographic diversification. Considering prior research results, these results show that product diversification is preferable for bondholders, while geographic diversification is preferable from a shareholder’s perspective. The opposite effects of both diversification strategies on shareholders, respectively, bondholders offer an important new perspective on corporate diversification. The results show that firms with a high level of corporate debt should struggle to justify a strategy involving geographic dispersion of activities and support a more diversified product portfolio strategy. This study also offers several avenues for investigating the bondholder’s perspective on corporate diversification in more detail. Y1 - 2020 U6 - https://doi.org/10.21511/imfi.17(4).2020.09 SN - 1810-4967 VL - 17 IS - 4 SP - 94 EP - 101 PB - LLC CPC Business Perspectives ER - TY - CHAP A1 - Steinbrink, Marco A1 - Koch, Philipp A1 - May, Stefan A1 - Jung, Bernhard A1 - Schmidpeter, Michael T1 - State Machine for Arbitrary Robots for Exploration and Inspection Tasks T2 - Proceedings of the 2020 4th International Conference on Vision, Image and Signal Processing N2 - In this paper, a novel state machine for mobile robots is described that enables a direct use for exploration and inspection tasks. It offers a graphical user interface (GUI) to supervise the process and to issue commands if necessary. The state machine was developed for the open-source framework Robot Operating System (ROS) and can interface arbitrary algorithms for navigation and exploration. Interfaces to the commonly used ROS navigation stack and the explore_lite package are already included and can be utilized. In addition, routines for mapping and inspection can be added freely to adapt to the area of application. The state machine features a teleoperation mode to which it changes as soon as a respective command was issued. It also implements a software emergency stop and multiplexes all movement commands to the motor controller. To show the state machine's capabilities several simulations and real-world experiments are described in which it was used. KW - State Machine KW - Exploration KW - Inspection KW - Mobile Robotics Y1 - 2020 U6 - https://doi.org/10.1145/3448823.3448857 PB - ACM CY - New York, NY, USA ER - TY - CHAP A1 - Grandeit, Philipp A1 - Haberkern, Carolyn A1 - Lang, Maximiliane A1 - Albrecht, Jens A1 - Lehmann, Robert T1 - Using BERT for Qualitative Content Analysis in Psychosocial Online Counseling T2 - Proceedings of the Fourth Workshop on Natural Language Processing and Computational Social Science N2 - Qualitative content analysis is a systematic method commonly used in the social sciences to analyze textual data from interviews or online discussions. However, this method usually requires high expertise and manual effort because human coders need to read, interpret, and manually annotate text passages. This is especially true if the system of categories used for annotation is complex and semantically rich. Therefore, qualitative content analysis could benefit greatly from automated coding. In this work, we investigate the usage of machine learning-based text classification models for automatic coding in the area of psycho-social online counseling. We developed a system of over 50 categories to analyze counseling conversations, labeled over 10.000 text passages manually, and evaluated the performance of different machine learning-based classifiers against human coders. Y1 - 2020 U6 - https://doi.org/10.18653/v1/2020.nlpcss-1.2 SP - 11 EP - 23 PB - Association for Computational Linguistics CY - Stroudsburg, PA, USA ER - TY - JOUR A1 - Bechteler, Christian A1 - Kühl, Hannes A1 - Girmscheid, Ralf T1 - Morphology and structure characterization of ceramic granules JF - Journal of the European Ceramic Society N2 - For the production of brittle materials like technical ceramics it is important to prohibit big defects in the material to achieve high mechanical strength. Due to that already the granule properties are important because they can cause defects in the final product. Characterization and quantification of the granule properties are important steps for improving the production process and properties of the granules for further processing. In this work a novel method for the characterization and quantification of granule morphology, especially sphericity, and internal structure like the ratio of macro pores is provided via digital microscopy. The new quantitative characterization method can be done in an academic and industrial field with appropriate effort. Differences between granules can be characterized, quantified and be used for further development. KW - Granule characterization Morphology Sphericity Internal structure Pore ratio Digital microscopy Y1 - 2020 U6 - https://doi.org/10.1016/j.jeurceramsoc.2020.04.044 SN - 0955-2219 VL - 40 IS - 12 SP - 4232 EP - 4242 PB - Elsevier BV ER - TY - JOUR A1 - Krippner, Roland A1 - Bonfig, Peter T1 - The “Fassadenladen” (Facade Shutter) — A New Interpretation of the Window Shutter, with Biogenic Materials JF - Journal of Civil Engineering and Architecture N2 - As part of a collaborative project, we took the window shutter — a widely used traditional facade element — and reinterpreted it for “adaptive” solutions using new, sustainable technologies. The aim was to design a modular construction kit that varies radiant energy, light and air flow to weather conditions and occupant requirements in new and existing residential and office buildings. KW - Facades, sun protection, use of daylight, biogenic materials, residential and office buildings Y1 - 2020 U6 - https://doi.org/10.17265/1934-7359/2020.07.003 SN - 1934-7359 VL - 14 IS - 7 SP - 368 EP - 377 PB - David Publishing Company ER - TY - JOUR A1 - Richter, Kneginja A1 - Kellner, Stefanie A1 - Miloseva, Lence A1 - Frohnhofen, Helmut T1 - Therapie der Insomnie im höheren Lebensalter JF - Zeitschrift für Gerontologie und Geriatrie N2 - Die Insomnie ist eine der häufigsten Gesundheitsstörungen im höheren Lebensalter. Sie erzeugt Leidensdruck und verursacht zahlreiche gesundheitliche Probleme. Daher ist ihre Behandlung oft indiziert. Die Verhaltenstherapie ist auch bei älteren Menschen die Behandlung der Wahl. Zudem hat die Lichttherapie ihren Stellenwert. Pharmakologische Maßnahmen sind weniger gut untersucht, sind unklar in ihrem Nutzen bei einer Langzeitanwendung und sollten nur kurzfristig zur Reduktion von Leidensdruck sowie eingebunden in ein therapeutisches Gesamtkonzept zur Anwendung kommen. Y1 - 2020 U6 - https://doi.org/10.1007/s00391-019-01684-3 SN - 0948-6704 VL - 53 IS - 2 SP - 105 EP - 111 PB - Springer Science and Business Media LLC ER - TY - CHAP A1 - Bayerl, Sebastian P. A1 - Frassetto, Tommaso A1 - Jauernig, Patrick A1 - Riedhammer, Korbinian A1 - Sadeghi, Ahmad-Reza A1 - Schneider, Thomas A1 - Stapf, Emmanuel A1 - Weinert, Christian T1 - Offline Model Guard: Secure and Private ML on Mobile Devices T2 - 2020 Design, Automation & Test in Europe Conference & Exhibition (DATE) N2 - Performing machine learning tasks in mobile applications yields a challenging conflict of interest: highly sensitive client information (e.g., speech data) should remain private while also the intellectual property of service providers (e.g., model parameters) must be protected. Cryptographic techniques offer secure solutions for this, but have an unacceptable overhead and moreover require frequent network interaction.In this work, we design a practically efficient hardware-based solution. Specifically, we build OFFLINE MODEL GUARD (OMG) to enable privacy-preserving machine learning on the predominant mobile computing platform ARM—even in offline scenarios. By leveraging a trusted execution environment for strict hardware-enforced isolation from other system components, OMG guarantees privacy of client data, secrecy of provided models, and integrity of processing algorithms. Our prototype implementation on an ARM HiKey 960 development board performs privacy-preserving keyword recognition using TensorFlow Lite for Microcontrollers in real time. Y1 - 2020 U6 - https://doi.org/10.23919/DATE48585.2020.9116560 PB - IEEE ER -