TY - RPRT A1 - Bogdanski, Ralf T1 - Vorläufiger Abschlussbericht der Forschungsprojekte LEV@KEP & VALUE@SERVICE N2 - Ziel des Projekts „LEV@KEP – Entwicklung eines zulassungsfreien Light Electric Vehicle für eine Nachhaltige Stadtlogistik“ (07/2017 bis 12/2019)“ war es, ein Schwerlastenrad bzw. Light Electric Vehicle zu entwickeln, das für den gewerblichen und den KEP-Einsatz geeignet ist. Das qualitativ hochwertige und zuverlässige neue Lastenfahrzeug soll das erfolgreiche Mikro-Depot-Konzept unterstützen und bereits vorhandene Lastenräder ersetzen. Durch das neue Fahrzeug wird die Zustellung von Paketen und auch der Transport anderer Güter verbessert werden. Im Teilprojekt „VALUE@SERVICE – Nachhaltige Logistische Mehrwertdienste für den stationären Einzelhandel und für Apotheken durch kooperative Ressourcennutzung in logistischen Netzwerken“ (07/2017–12/2019) wurde die Realisierungschance von logistischen Mehrwertdiensten durch gewerbliche Lastenradlogistik mit dem Mikro-Depot-Konzept geprüft. Das Projekt sollte das Mikro-Depot-Konzept um Same-Day-Delivery für den Einzelhandel und Apotheken, Next-Day-Delivery vom Einzelhandel zu überregionalen Kunden und Retourenabwicklung im Onlinehandel erweitern. Ziel waren abgestimmte Nutzungskonzepte, mithilfe derer die Unternehmen DPD, Tiramizoo und Sanacorp zur optimalen Nutzung vorhandener Netzwerkressourcen. So sollte der Lieferverkehr durch getaktete Versandzeiten, gemeinsam genutzte Depots und zusammengelegte Auslieferungen effizienter werden. Um diese Anwendung zu realisieren, wurden die Gemeinsamkeiten und Unterschiede in den logistischen Anforderungen und Sendestrukturen geprüft. Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-26223 PB - Technische Hochschule Nürnberg CY - Nürnberg ER - TY - CHAP A1 - Götzelmann, Timo A1 - Kreimeier, Julian T1 - Optimization of navigation considerations of people with visual impairments through ambient intelligence BT - a case study N2 - As urbanization progresses, cities are becoming increasingly complex. To make this complexity advantageous, Smart Cities integrate intelligent sensors that communicate with each other and are invisible to citizens, so that they can offer additional services. Despite the fact that the inclusion of diverse citizens is an essential requirement of Smart Cities, Ambient Intelligence is often not considered under accessibility aspects. The central question in this context is how disadvantaged groups in particular can benefit from Smart Cities. It is extremely important for people with disabilities to be able to move autonomously in public spaces. For this purpose, however, people who are blind sometimes need to be able to ask other people for directions. Knowing whether people are present can be important information. In our exemplary case study, Ambient Intelligence is used for people with visual impairments, so that they can decide whether they want to go to this or an alternative place based on the information about the density of people in a place. Y1 - 2020 U6 - https://doi.org/10.1145/3389189.3398009 SP - 1 EP - 6 PB - ACM CY - New York, NY, USA ER - TY - CHAP A1 - Saur, Gregor A1 - Kruglov, Roman A1 - Engelbrecht, Rainer T1 - Microsecond Optical Frequency Tuning of DFB Laser Diodes for Coherent Optical Frequency Domain Reflectometry N2 - Optical frequency tuning ranges up to 600 GHz or 4.8 nm have been achieved within microseconds and a standard telecom DFB laser diode operating at 1550 nm. The dynamic optical frequency tuning is induced by electrical current pulse injection and measured using an interferometric setup. Potentially, low-cost sensor systems based on optical coherence tomography (OCT) or coherent optical frequency domain reflectometry (c-OFDR) could be realized, achieving sub-mm two-point range resolution or even better single-point range precision within a few microseconds for a single measurement. KW - Tunable lasers KW - Semiconductor lasers KW - Wavelength shift KW - Fiber sensing Y1 - 2020 SN - 978-3-9819376-2-6 U6 - https://doi.org/10.5162/SMSI2020/C6.2 VL - 2020 SP - 189 EP - 190 PB - AMA Service GmbH CY - Wunstorf, Germany ER - TY - CHAP A1 - Boost, Marie A1 - Promberger, Markus A1 - Meier, Lars A1 - Sowa, Frank ED - Boost, Marie ED - Dagg, Jenny ED - Gray, Jane ED - Promberger, Markus T1 - Developing the concept of poverty and resilience T2 - Poverty, Crisis and Resilience N2 - This chapter focuses on an elaborated understanding of the concept of social resilience and its potential to enrich research on poverty and social policy. The history of this concept is shown by tracing its development from a psychological, ecosystemic and socio-spatial perspective - focusing on spatial and social limitations of resilience. The current approach of social resilience derives from this background and emphases resilience as a dynamic process, embedded in social and institutional structures. Arising from this discussion, several elements of a new definition of social resilience are presented. Social resilience, especially within the context of poverty, is based on different sources, such as available common goods, reliable networks or civil society organisations. Our results show that the impact of social resilience is highly preconditioned, relates to different characteristics across our respondents and needs support of the welfare state and charity organisations to fully exploit its potential. Y1 - 2020 SN - 9781788973205 U6 - https://doi.org/10.4337/9781788973205.00013 PB - Edward Elgar Publishing ER - TY - JOUR A1 - Sowa, Frank A1 - Rösch, Benedikt ED - Oberbeck, Niels T1 - Wohnungslose Menschen in Figurationen N2 - In einer Machbarkeitsstudie erforschte das Projektteam, inwiefern der Begriff der Figuration (Elias) geeignet ist, um bislang nicht berücksichtigte oder unentdeckte Aspekte des sozialen Phänomens Wohnungslosigkeit sichtbar zu machen und in für die Praxis anwendbare Erkenntnisse zu transformieren. Mit diesen Ergebnissen sollten weitere Mittel für ein mindestens zweijähriges Forschungsprojekt eingeworben werden. T3 - Vorlaufforschung / Schriftenreihe der Georg-Simon-Ohm-Hochschule, Nürnberg - 2019/2020 Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-22505 SN - 2626-7616 SP - 211 EP - 218 PB - Ohm CY - Nürnberg ER - TY - JOUR A1 - Sowa, Frank A1 - Rösch, Benedikt A1 - Holzmeyer, Tanja A1 - Neberich, Marcel A1 - Opferkuch, Frank A1 - Proschek, Katrin A1 - Reindl, Richard A1 - Scheja, Joachim A1 - Zauter, Sigrid T1 - Digitalisierung für alle? Zur Auswirkung digitaler Angebote auf Teilhabechancen von Wohnungslosen JF - Soziale Passagen N2 - Das an der Technischen Hochschule Nürnberg Georg Simon Ohm angesiedelte Forschungsprojekt „SIWo – Smart Inklusion für Wohnungslose“ widmet sich der Fragestellung, welche Informations‑, Unterstützungs- und Beratungsbedarfe bei wohnungslosen Menschen vorliegen und in welcher Form sich die Teilhabechancen für die heterogene Zielgruppe wohnungsloser oder von Wohnungsnot betroffener Menschen mittels digitaler Hilfe und Beratungsangebote verbessern lassen. Hierfür werden zum einen mit Gruppendiskussionen und qualitativen Interviews Bedarfe identifiziert. Zum anderen sollen im Rahmen des Projekts prototypische Lösungsansätze in Form einer plattformübergreifenden Hilfe-App entwickelt, getestet und mit Evaluationsverfahren begleitet werden. Charakteristisch ist dabei die enge interdisziplinäre Zusammenarbeit zwischen Sozialwissenschaft, Informatik und Energietechnik, die partizipative Begleitung des Projekts durch Wohnungslose und andere Stadtakteur*innen, sowie der Fokus auf interaktive Funktionen, die digitalisierte Begegnungsräume ermöglichen und Interaktionen auch zwischen Bevölkerungs-gruppen fördern, die i. d. R. eher wenig miteinander zu tun haben. Dieses Vorgehen begreift somit Wohnungslosigkeit nicht ausschließlich als professionelles Arbeitsfeld der Sozialen Arbeit, sondern als gesamtgesellschaftliche Aufgabe. KW - Wohnungslosigkeit · Vulnerabilität · Bedarfe · Soziale Arbeit · Digitalisierung Y1 - 2020 U6 - https://doi.org/10.1007/s12592-020-00338-1 SN - 1867-0180 VL - 12 IS - 1 SP - 185 EP - 190 PB - Springer Science and Business Media LLC ER - TY - CHAP A1 - Degen, Katrin ED - Britta, Hoffarth ED - Susanne, Richter ED - Eva, Reuter T1 - "Wichtige Verbündete im Kampf" - Zugehörigkeitskonstruktionen (extrem) rechter Akteur*innen entlang geschlechts- und sexualitätsbezogener Faktoren BT - Räume, Deutungen, Repräsentationen T2 - Geschlecht und Medien KW - Rechtsextremismus KW - Geschlecht KW - Antifeminismus KW - Ethnosexismus Y1 - 2020 SN - 9783593512938 PB - Campus CY - Frankfurt am Main ER - TY - CHAP A1 - Auernhammer, Katja A1 - Tavakoli Kolagari, Ramin T1 - Workshop for Automotive Software Systems Engineering Education T2 - 2020 IEEE 32nd Conference on Software Engineering Education and Training (CSEE&T) N2 - In view of the advent of autonomous driving, the automotive industry is longing for adequately trained employees in a wide range of fields; these include not so much the classic automotive engineering and embedded systems topics, but rather software development, robotics, machine learning, statistics and design. As a particularly specific, industry-oriented discipline, automotive software engineering is hardly represented in academic teaching, except for a few AUTOSAR courses. But as a beacon project of digitization, autonomous driving can arouse broad interest among students who are interested in how diverse disciplines can be profitably combined to realize an impressive project. This interest is an excellent chance for both universities and industry to engage in constructive dialogue, to carry out exciting multidisciplinary projects at universities and to meet the needs of industry with graduates who have a relevant and versatile education. This workshop provides an opportunity for both sides to meet, share requirements and experiences and develop a best practice course according to industry requirements and academic feasibility. KW - Automotive engineering , Software engineering , Industries , Education , Conferences , Machine learning , Automobiles Y1 - 2020 U6 - https://doi.org/10.1109/CSEET49119.2020.9206169 PB - IEEE ER - TY - CHAP A1 - Freiling, Felix A1 - Tavakoli Kolagari, Ramin A1 - Auernhammer, Katja T1 - Efficient Black-Box Search for Adversarial Examples using Relevance Masks T2 - Proceedings of the 2020 Workshop on DYnamic and Novel Advances in Machine Learning and Intelligent Cyber Security N2 - Machine learning classifiers for image recognition are prevalent in many applications. We study the problem of finding adversarial examples for such classifiers, i.e., to manipulate the images in such a way that they still look like the original images to a human but are misinterpreted by the classifier. Finding adversarial examples corresponds to a search problem in the image space. We focus on black-box attacks that can only use the original classifier to guide the search. The challenge is not to find adversarial examples, but rather to find them efficiently, ideally in real time. We show two novel methods that increase the efficiency of black-box search algorithms for adversarial examples: The first uses a relevance mask, i.e., a bitmask on the original image that restricts the search to those pixels that appear to be more relevant to the attacked classifier than others. The second exploits the discovery of merge drift, a phenomenon that negatively affects search algorithms that are based on the merging of image candidates. We evaluate both concepts on existing and new algorithms. KW - Machine Learning, Attacks, Adversarial Examples, Relevance Masks Y1 - 2022 U6 - https://doi.org/10.1145/3477997.3478013 SP - 1 EP - 12 PB - ACM CY - New York, NY, USA ER - TY - JOUR A1 - Biedermann, Till M. A1 - Reich, M. A1 - Paschereit, C. O. T1 - Multi-Objective Modeling of Leading-Edge Serrations Applied to Low-Pressure Axial Fans JF - Journal of Engineering for Gas Turbines and Power N2 - A novel modeling strategy is proposed which allows high-accuracy predictions of aerodynamic and aeroacoustic target values for a low-pressure axial fan, equipped with serrated leading edges. Inspired by machine learning processes, the sampling of the experimental space is realized by use of a Latin hypercube design plus a factorial design, providing highly diverse information on the analyzed system. The effects of four influencing parameters (IP) are tested, characterizing the inflow conditions as well as the serration geometry. A total of 65 target values in the time and frequency domains are defined and can be approximated with high accuracy by individual artificial neural networks. Furthermore, the validation of the model against fully independent test points within the experimental space yields a remarkable fit, even for the spectral distribution in 1/3-octave bands, proving the ability of the model to generalize. A metaheuristic multi-objective optimization approach provides two-dimensional Pareto optimal solutions for selected pairs of target values. This is particularly important for reconciling opposing trends, such as the noise reduction capability and aerodynamic performance. The chosen optimization strategy also allows for a customized design of serrated leading edges, tailored to the specific operating conditions of the axial fan. KW - Acoustics KW - Artificial neural networks KW - Blades KW - Design KW - Fans KW - Flow (Dynamics) KW - Modeling KW - Noise control KW - Optimization KW - Pareto optimization KW - Pressure KW - Turbulence KW - Noise (Sound) KW - Rotors KW - Signals KW - Wavelength Y1 - 2020 U6 - https://doi.org/10.1115/1.4048599 SN - 0742-4795 VL - 142 IS - 11 PB - ASME International ER - TY - CHAP A1 - Scholz, Stefanie A1 - Winkler, Christian T1 - How to Engage Followers: Classifying Fashion Brands According to Their Instagram Profiles, Posts and Comments T2 - Computer Science & Information Technology (CS & IT) N2 - In this article we show how fashion brands communicate with their follower on Instagram. We use a continuously update dataset of 68 brands, more than 300,000 posts and more than 40,000,000 comments. Starting with descriptive statistics, we uncover different behavior and success of the various brands. It turns out that there are patterns specific to luxury, mass-market and sportswear brands. Posting volume is extremely brand dependent as is the number of comments and the engagement of the community. Having understood the statistics, we turn to machine learning techniques to measure the response of the community via comments. Topic models help us understand the structure of their respective community and uncover insights regarding the response to campaigns. Having up-to-date content is essential for this kind of analysis, as the market is highly volatile. Furthermore, automatic data analysis is crucial to measure the success of campaigns and adjust them accordingly for maximum effect. KW - Instagram, Fashion Brands, Data Extraction, Marketing, Analysis, Artificial Intelligence, Netnography, Descriptive Statistics, Visualization, Community Engagement, Artificial Intelligence, Unsupervised Learning, Topic Modelling Y1 - 2020 U6 - https://doi.org/10.5121/csit.2020.101704 SP - 223 EP - 234 PB - AIRCC Publishing Corporation ER - TY - CHAP A1 - Dalferth, Jasmin A1 - Winkelmann, Sven A1 - Schwenker, Friedhelm T1 - Using Mask R-CNN for Image-Based Wear Classification of Solid Carbide Milling and Drilling Tools T2 - Artificial Neural Networks in Pattern Recognition N2 - In order to ensure high productivity and quality in industrial production, early identification of tool wear is needed. Within the context of Industry 4.0, we integrate wear monitoring of solid carbide milling and drilling cutters automatically into the production process. Therefore, we propose to analyze wear types with image instance segmentation using Mask R-CNN with feature pyramid and bounding box regression. Our approach is able to recognize the five most important wear types: flank wear, crater wear, fracture, built-up edge and plastic deformation. While other methods use image classification and classify only one wear type for each image, our model is able to detect multiple wear types. Over 35 models with different hyperparameter settings were trained on 5,000 labeled images to establish a reliable classifier. The results show up to 82.03% accuracy and benefit for overlapping wear types, which is crucial for using the model in production. Y1 - 2020 SN - 9783030583088 U6 - https://doi.org/10.1007/978-3-030-58309-5_18 SN - 0302-9743 SP - 223 EP - 234 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Mohan, Abhinav A1 - Ulmer, Ulrich A1 - Hurtado, Lourdes A1 - Loh, Joel A1 - Li, Young Feng A1 - Tountas, Athanasios A. A1 - Krevert, Carola A1 - Chan, Chakyu A1 - Liang, Yilei A1 - Brodersen, Peter A1 - Sain, Mohini M. A1 - Ozin, Geoffrey A. T1 - Hybrid Photo- and Thermal Catalyst System for Continuous CO2 Reduction JF - ACS Applied Materials & Interfaces N2 - Heterogeneous thermal catalytic processes are vital for industrial production of fuels, fertilizers, and other chemicals necessary for sustaining human life. However, these processes are highly energy-intensive, requiring a vast consumption of fossil fuels. An emerging class of heterogeneous catalysts that are thermally driven but also exhibit a photochemically enhanced rate can potentially reduce process energy intensity by partially substituting conventional heat (where fossil fuels are needed) with solar energy. Such catalyst systems have yet to be practically utilized. Here, we demonstrate a compact electrically heated photo- and thermal annular reactor module to reduce CO2 to CO, via the reverse water gas shift reaction. A first-principles-based design approach was taken in developing a SiO2 on an Al photo- and thermal catalyst system for the model photo- and thermal indium oxide hydroxide (In2O3–x(OH)y) catalysts. A 5-fold light enhancement in the CO production rate and over 70 h of stable CO production were achieved. This represents the highest light enhancement effect reported for this model photocatalyst to date. The reactor presented herein allows continuous operation and a significant reduction of 31% in heater power consumption when provided with an additional 2 suns of irradiation, demonstrating the strong photo- and thermal-harvesting performances of the catalyst system developed in this work. Y1 - 2020 U6 - https://doi.org/10.1021/acsami.0c06232 SN - 1944-8244 VL - 12 IS - 30 SP - 33613 EP - 33620 PB - American Chemical Society (ACS) ER - TY - CHAP A1 - Voit, Thomas A1 - Schneider, Alexander A1 - Kriegbaum, Mathias T1 - Towards an Empirically Based Gamification Pattern Language using Machine Learning Techniques N2 - The ineffectiveness of many gamification projects can be attributed to wrong decisions made during the conceptual design phase, especially in the selection of game design elements. This paper introduces a data driven method of creating a gamification pattern language similar to software design patterns to help gamification designers select such elements. Thanks to modern machine learning technologies such a pattern language can be based on a comprehensive empirical analysis to assess the actual use of game design elements in games. This paper is the first report on an ongoing research project that has been carried out since the beginning of 2017 in cooperation with the German Games Archive to extract game design elements from more than 30,000 board games using machine learning techniques. Initial tests based on support vector classification and 4,000 games show that game design elements can be reliably identified with accuracy rates between 80 and 90%. KW - Gamification, Game Design, Pattern Language, Machine Learning Y1 - 2020 U6 - https://doi.org/10.1109/cseet49119.2020.9206223 SN - 2377-570X PB - IEEE ER - TY - JOUR A1 - Guo, Jiuli A1 - Duchesne, Paul N. A1 - Wang, Lu A1 - Song, Rui A1 - Xia, Meikun A1 - Ulmer, Ulrich A1 - Sun, Wei A1 - Dong, Yuchan A1 - Loh, Joel Y. Y. A1 - Kherani, Nazir P. A1 - Du, Jimin A1 - Zhu, Baolin A1 - Huang, Weiping A1 - Zhang, Shoumin A1 - Ozin, Geoffrey A. T1 - High-Performance, Scalable, and Low-Cost Copper Hydroxyapatite for Photothermal CO2 Reduction JF - ACS Catalysis Y1 - 2020 U6 - https://doi.org/10.1021/acscatal.0c03806 SN - 2155-5435 VL - 10 IS - 22 SP - 13668 EP - 13681 PB - American Chemical Society (ACS) ER - TY - JOUR A1 - Eisenlauer, Moritz A1 - Teipel, Ulrich T1 - Comminution of Wood – Influence of Process Parameters JF - Chemical Engineering & Technology N2 - An essential element for sustainable use of renewable resources is an efficient comminution process for which the relation between energy input and size reduction is of great importance. Fine comminution of beech, oak, and spruce wood chips in cutting and hammer mills at different moisture content levels is investigated. The influence of the different process parameters as well as the size reduction performed by the hammer and cutting mill on the specific comminution energy is reported and the particulate properties of the comminution products are reported. Considering the energy requirements, functional relations were derived from the experimental results, which describe the relation between comminution energy and size reduction. Y1 - 2020 U6 - https://doi.org/10.1002/ceat.201900488 SN - 0930-7516 VL - 43 IS - 5 SP - 838 EP - 847 PB - Wiley ER - TY - JOUR A1 - Teipel, Ulrich T1 - Aufbereitung von Sekundärrohstoffen der Bau- und Keramikindustrie JF - Keramische Zeitschrift Y1 - 2020 U6 - https://doi.org/10.1007/s42410-020-0130-3 SN - 0023-0561 VL - 72 IS - 3 SP - 36 EP - 42 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Dresel, Alexander A1 - Teipel, Ulrich T1 - Jet Dispersion of Multiwall Carbon Nanotubes and Correlation with Suspension Rheology JF - Chemical Engineering & Technology N2 - A novel jet dispersion technique was developed and investigated which enabled excellent carbon nanotube (CNT) dispersion by high exfoliation at even very low pressure drops. Suitable procedures were developed for the characterization of agglomerate size and fraction of individual CNTs. The appropriate characterization enabled the definition of a dimensionless dispersing parameter and the development of a kinetic model that describes CNT dispersion in dependence of the volumetric energy input. The rheological behavior of CNT suspensions in steady‐shear flows was investigated and demonstrated how the agglomerate fracture and CNT individualization influence the suspension viscosity. Y1 - 2020 U6 - https://doi.org/10.1002/ceat.201900534 SN - 0930-7516 VL - 43 IS - 5 SP - 869 EP - 878 PB - Wiley ER - TY - JOUR A1 - Chairopoulou, Makrina A. A1 - Kratzer, Fabian A1 - Groß, Roland A1 - Herrmann, Michael A1 - Teipel, Ulrich T1 - Influence of the Temperature on Coccolith‐Containing Systems from Emiliania huxleyi Cultivations JF - Chemical Engineering & Technology N2 - Thermogravimetric analysis of a coccolith‐containing biogenic broth showed a three‐step degradation process. According to this system behavior, the biogenic broth was heated to specific temperatures and characterized in terms of its morphology, surface chemistry, and crystallinity. The elemental and organic composition of the treated samples was also evaluated and compared to the reference material. The presented results were acquired in an effort to exploit pretreatment scenarios for such a biogenic system that would improve and support a separation process. Y1 - 2020 U6 - https://doi.org/10.1002/ceat.201900507 SN - 0930-7516 VL - 43 IS - 5 SP - 904 EP - 912 PB - Wiley ER - TY - JOUR A1 - Seiler, Elisa A1 - Urban, Helfried A1 - Teipel, Ulrich T1 - Mikrowellenpyrolyse von carbonfaserhaltigen Kunststoffen als Recyclingoption JF - Chemie Ingenieur Technik N2 - Herausforderungen bei der Etablierung einer Circular Economy von carbonfaservertärkten Kunststoffen (CFK) ergeben sich insbesondere durch die nötige, jedoch problematische Trennung des Faser‐Matrix‐Verbunds. Das Pyrolyseverfahren stellt eine mögliche, bereits industriell umgesetzte, Technologie zur Verbundtrennung dar. Eine Weiterentwicklung ist die mikrowellenunterstütze Pyrolyse, bei der das CFK‐Material durch die Mikrowellen aufgeheizt und so die Faser freigelegt wird. Prozessgrundlagen und Einflüsse auf die Faser‐Matrix‐Trennung werden im vorliegenden Beitrag betrachtet. T2 - Microwave Pyrolysis of Carbon-Fiber-Reinforced Plastics as Recycling Option Y1 - 2020 U6 - https://doi.org/10.1002/cite.201900133 SN - 0009-286X VL - 92 IS - 4 SP - 469 EP - 475 PB - Wiley ER - TY - CHAP A1 - Weers, Martin A1 - Wollmann, Annett A1 - Teipel, Ulrich A1 - Weber, Alfred P. T1 - Dynamics of Separation Characteristics of Sieving and Flow Classification Processes T2 - Dynamic Flowsheet Simulation of Solids Processes Y1 - 2020 SN - 9783030451677 U6 - https://doi.org/10.1007/978-3-030-45168-4_10 SP - 349 EP - 390 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Fehn, Thomas A1 - Teipel, Ulrich T1 - Werkstoffliche Aufbereitung von Wärmedämmverbundsystemen JF - Chemie Ingenieur Technik N2 - Aufgrund steigender energetischer Anforderungen an Gebäude, werden Wärmedämmverbundsysteme (WDVS) seit den 1970 Jahren zur Dämmung von Gebäudefassaden verwendet. Angesichts der Langlebigkeit dieser Kompositmaterialien fallen seit den letzten Jahren vermehrt WDVS‐Abfälle an. Eine werkstoffliche Verwertung dieser Systeme existiert aktuell noch nicht, wodurch ein enormes Ressourceneffizienzpotenzial verloren geht. Aufgrund der Komplexität dieser Kompositmaterialien wurden im Rahmen dieser Arbeit Wärmedämmverbundsysteme durch verfahrenstechnische Prozessschritte aufbereitet. T2 - Preparation of Thermal Insulation Composite Systems Y1 - 2020 U6 - https://doi.org/10.1002/cite.201900124 SN - 0009-286X VL - 92 IS - 4 SP - 431 EP - 440 PB - Wiley ER - TY - JOUR A1 - Teipel, Ulrich A1 - Wolf, Sebastian A1 - Schreiber, Alex T1 - Durchgangswiderstand von partikulären Systemen JF - Chemie Ingenieur Technik N2 - Die elektrischen Eigenschaften von Partikeln insbesondere der Durchgangswiderstand von Partikelschüttungen haben in vielen verfahrenstechnischen Prozessen, bei der Produktqualifizierung oder dem Brand‐ und Explosionsschutz eine entscheidende Bedeutung. Da sich der Ladungstransport in einem dispersen System von dem in einem homogenen Festkörper unterscheidet, ist der Durchgangswiderstand entscheidend von den Produkteigenschaften der Partikel und des Fluids abhängig. Im Rahmen dieser Arbeit wurde die Abhängigkeit des Durchgangswiderstandes von der inneren Struktur der Schüttung, der relativen Feuchtigkeit, der Konditionierungszeit bei unterschiedlichem Klima und der mittleren Partikelgröße in einer konzentrischen Messzelle untersucht. T2 - Electrostatic Resistance of Particulate Systems Y1 - 2020 U6 - https://doi.org/10.1002/cite.201800141 SN - 0009-286X VL - 92 IS - 3 SP - 229 EP - 237 PB - Wiley ER - TY - JOUR A1 - Chairopoulou, Makrina A. A1 - Schreiber, Alex A1 - Kratzer, Fabian A1 - Wolf, Sebastian A1 - Teipel, Ulrich T1 - Recycling von marinen Sekundärrohstoffen JF - Chemie Ingenieur Technik N2 - Austernschalen stellen als Abfallprodukt eine große Umweltbelastung dar und die Wiederverwendung des Materials gewinnt zunehmend an Bedeutung. Da der Zerkleinerungsprozess beim Recycling von Sekundärrohstoffen die Eigenschaften des Materials definiert, wurden Austernschalen mit einer Planetenkugelmühle und einer Schlagradmühle zerkleinert und die gewonnenen Fraktionen in Bezug auf Größe und Form analysiert und miteinander verglichen. Ein Zerkleinerungsmaterial der Schlagradmühle wurde für eine Reihe von Benetzungsversuchen verwendet, die dazu beitrugen, die freie Oberflächenenergie des Materials nachzuweisen. KW - Recycling ; Marine Rohstoffe ; Zerkleinerung ; comminution ; marine raw materials ; Oyster Shells ; Austernschale Y1 - 2020 U6 - https://doi.org/10.1002/cite.201900128 SN - 0009-286X VL - 92 IS - 4 SP - 405 EP - 413 PB - Wiley ER - TY - JOUR A1 - Pieper, Maximilian A1 - Michalke, Amelie A1 - Gaugler, Tobias T1 - Calculation of external climate costs for food highlights inadequate pricing of animal products JF - Nature Communications N2 - Although the agricultural sector is globally a main emitter of greenhouse gases, thorough economic analysis of environmental and social externalities has not yet been conducted. Available research assessing agricultural external costs lacks a differentiation between farming systems and food categories. A method addressing this scientific gap is established in this paper and applied in the context of Germany. Using life-cycle assessment and meta-analytical approaches, we calculate the external climate costs of foodstuff. Results show that external greenhouse gas costs are highest for conventional and organic animal-based products (2.41€/kg product; 146% and 71% surcharge on producer price level), followed by conventional dairy products (0.24€/kg product; 91% surcharge) and lowest for organic plant-based products (0.02€/kg product; 6% surcharge). The large difference of relative external climate costs between food categories as well as the absolute external climate costs of the agricultural sector imply the urgency for policy measures that close the gap between current market prices and the true costs of food. Y1 - 2020 U6 - https://doi.org/10.1038/s41467-020-19474-6 SN - 2041-1723 VL - 11 IS - 1 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Santillán‐Saldivar, Jair A1 - Gaugler, Tobias A1 - Helbig, Christoph A1 - Rathgeber, Andreas A1 - Sonnemann, Guido A1 - Thorenz, Andrea A1 - Tuma, Axel T1 - Design of an endpoint indicator for mineral resource supply risks in life cycle sustainability assessment BT - The case of Li‐ion batteries JF - Journal of Industrial Ecology N2 - Good management requires proper measurement, yet little is known about anthropogenic climate effects of agriculture. To remedy this, a precise measurement of negative externalities is urgently needed. Therefore, the authors of this article describe the heterogeneity of results from previous studies on climate effects and – focusing on the agricultural sector – identify reasons for this phenomenon. The authors conduct a meta-regression analysis, based on 53 primary studies that cover the period between 1951 and 2015. All countries or country groups are included in the 1345 reported results on emitted amounts of CO2e and SO2e. Our findings confirm the well-known result that an increase in livestock quantities corresponds with a significant increase in emission levels. By integrating culture-related country data, the authors conclude that the level of “humane orientation” and the amounts of emissions follow opposite courses. Furthermore, studies conducted while the first author of this study was working for an NGO, report significantly higher emissions. Based on an adaptation of a meta-regression analysis to the field of environmental performance measurement, we are able to provide new insights about the influence of the change of individual drivers on the emission level. Examples of these insights include a one-third increase in cattle stock is associated with an increase in emissions of 29.45 t/km2. We also find that publications where the first author works for an NGO reported an emission level 87.04 t/km2 higher than other publications. These findings enable the identification of the main drivers of emissions, while helping to explain the heterogeneity of existing studies. Based on the findings of this study, companies can take reliable measures to reduce the external climate effects of their products. Y1 - 2020 U6 - https://doi.org/10.1111/jiec.13094 SN - 1088-1980 VL - 25 IS - 4 SP - 1051 EP - 1062 PB - Wiley ER - TY - JOUR A1 - Gaugler, Tobias A1 - Stoeckl, Stefan A1 - Rathgeber, Andreas W. T1 - Global climate impacts of agriculture: A meta-regression analysis of food production JF - Journal of Cleaner Production N2 - Good management requires proper measurement, yet little is known about anthropogenic climate effects of agriculture. To remedy this, a precise measurement of negative externalities is urgently needed. Therefore, the authors of this article describe the heterogeneity of results from previous studies on climate effects and – focusing on the agricultural sector – identify reasons for this phenomenon. The authors conduct a meta-regression analysis, based on 53 primary studies that cover the period between 1951 and 2015. All countries or country groups are included in the 1345 reported results on emitted amounts of CO2e and SO2e. Our findings confirm the well-known result that an increase in livestock quantities corresponds with a significant increase in emission levels. By integrating culture-related country data, the authors conclude that the level of “humane orientation” and the amounts of emissions follow opposite courses. Furthermore, studies conducted while the first author of this study was working for an NGO, report significantly higher emissions. Based on an adaptation of a meta-regression analysis to the field of environmental performance measurement, we are able to provide new insights about the influence of the change of individual drivers on the emission level. Examples of these insights include a one-third increase in cattle stock is associated with an increase in emissions of 29.45 t/km2. We also find that publications where the first author works for an NGO reported an emission level 87.04 t/km2 higher than other publications. These findings enable the identification of the main drivers of emissions, while helping to explain the heterogeneity of existing studies. Based on the findings of this study, companies can take reliable measures to reduce the external climate effects of their products. KW - External effects Food production Global climate impacts Meta-regression analysis Y1 - 2020 U6 - https://doi.org/10.1016/j.jclepro.2020.122575 SN - 0959-6526 VL - 276 PB - Elsevier BV ER - TY - CHAP A1 - Aslansefat, Koorosh A1 - Sorokos, Ioannis A1 - Whiting, Declan A1 - Tavakoli Kolagari, Ramin A1 - Papadopoulos, Yiannis T1 - SafeML: Safety Monitoring of Machine Learning Classifiers Through Statistical Difference Measures T2 - Model-Based Safety and Assessment Y1 - 2020 SN - 9783030589196 U6 - https://doi.org/10.1007/978-3-030-58920-2_13 SN - 0302-9743 SP - 197 EP - 211 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Spiegelhalder, Kai A1 - Acker, Jens A1 - Baumeister, Harald A1 - Büttner-Teleaga, Antje A1 - Danker-Hopfe, Heidi A1 - Ebert, David D. A1 - Fietze, Ingo A1 - Frase, Lukas A1 - Klein, Sarah A1 - Lehr, Dirk A1 - Maun, Andy A1 - Mertel, Isabella A1 - Richter, Kneginja A1 - Riemann, Dieter A1 - Sauter, Cornelia A1 - Schilling, Claudia A1 - Schlarb, Angelika A. A1 - Specht, Markus A1 - Steinmetz, Lisa A1 - Weeß, Hans G. A1 - Crönlein, Tatjana T1 - Digitale Behandlungsangebote für Insomnie – eine Übersichtsarbeit JF - Somnologie N2 - ZusammenfassungDigital angebotene psychologische Interventionen gegen Schlafstörungen sind aktuell ein sehr intensiv bearbeitetes Forschungsthema. In dieser Übersichtsarbeit werden Originalarbeiten und Metaanalysen zu diesem Thema zusammengefasst. Hierbei zeigt sich, dass die internetbasierte kognitive Verhaltenstherapie für Insomnie (KVT-I) bei Erwachsenen durchweg sehr effektiv ist mit allenfalls leicht geringeren Effektstärken als die gleiche Behandlung mit physischer Präsenz von Therapeuten und Patienten. Behandlungseffekte zeigen sich dabei auch für sekundäre Outcome-Parameter wie Depressivität, Angst, Fatigue und Lebensqualität. Hingegen lassen die Forschung zur Wirksamkeit der internetbasierten KVT‑I bei Erwachsenen mit komorbiden psychischen Störungen oder körperlichen Erkrankungen sowie die Forschung zur Frage, wieviel Therapeutenkontakt in die Behandlung integriert werden sollte, anscheinend noch keine abschließenden Antworten zu. In diesen Bereichen scheint weitere Forschung notwendig zu sein scheint. Y1 - 2020 U6 - https://doi.org/10.1007/s11818-020-00238-9 SN - 1432-9123 VL - 24 IS - 2 SP - 106 EP - 114 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Richter, Kneginja A1 - Baumgärtner, Lisa A1 - Niklewski, Günter A1 - Peter, Lukas A1 - Köck, Melanie A1 - Kellner, Stefanie A1 - Hillemacher, Thomas A1 - Büttner-Teleaga, Antje T1 - Sleep disorders in migrants and refugees BT - a systematic review with implications for personalized medical approach JF - EPMA Journal Y1 - 2020 U6 - https://doi.org/10.1007/s13167-020-00205-2 SN - 1878-5077 VL - 11 IS - 2 SP - 251 EP - 260 PB - Springer Science and Business Media LLC ER - TY - JOUR A1 - Richter, Kneginja A1 - Peter, Lukas A1 - Rodenbeck, Andrea A1 - Weess, Hans Günter A1 - Riedel-Heller, Steffi G. A1 - Hillemacher, Thomas T1 - Shiftwork and Alcohol Consumption BT - A Systematic Review of the Literature JF - European Addiction Research N2 - Shiftwork can be a risk factor for a number of different somatic and psychological health conditions, especially sleep disorders. Shiftworkers sleep less than dayworkers, and 20–40% of them suffer from difficulties initiating and maintaining sleep, which result in reduced capacity for work and social life. A common coping strategy might be the use of alcohol, which presents a health and safety hazard as it further impairs sleep quality and exacerbates sleepiness in the workplace. This review aimed to assess the extent of such possible connections. Y1 - 2020 U6 - https://doi.org/10.1159/000507573 SN - 1022-6877 VL - 27 IS - 1 SP - 9 EP - 15 PB - S. Karger AG ER - TY - JOUR A1 - Chatzitakis, Paris A1 - Safarov, Javid A1 - Opferkuch, Frank A1 - Dawoud, Belal A1 - Hassel, Egon T1 - Vapor pressures and activity coefficients of 2,2,2-trifluoroethanol in binary mixtures with 1,3-dimethyl-2-imidazolidinone and 2-pyrrolidone JF - Journal of Molecular Liquids N2 - The vapor pressures of two binary mixtures containing 2-trifluoroethanol (TFE) + 1,3-dimethyl-2-imidazolidinone (DMI) and TFE + 2-pyrrolidone (PYR), were investigated at temperatures T = (274.15 to423.15) K using two different static method installations. Both combinations were modelled using an extended Clausius-Clapeyron equation with concentration dependent parameters and the NRTL equation with temperature dependent parameters. The best fit was obtained using the NRTL equation. KW - 2-Trifluoroethanol 1,3-Dimethyl-2-imidazolidinone 2-Pyrrolidone Vapor pressure NRTL Clausius-Clapeyron Y1 - 2020 U6 - https://doi.org/10.1016/j.molliq.2020.112828 SN - 0167-7322 VL - 305 PB - Elsevier BV ER - TY - CHAP A1 - Koch, Philipp A1 - Engelhardt, Helmut A1 - May, Stefan A1 - Schmidpeter, Michael A1 - Ziegler, Jasmin A1 - Nüchter, Andreas T1 - Signed Distance Based Reconstruction for Exploration and Change Detection in Underground Mining Disaster Prevention T2 - 2020 IEEE International Symposium on Safety, Security, and Rescue Robotics (SSRR) N2 - This publication describes an application of a Truncated Signed Distance Mapping approach for disaster intervention in underground mine shafts through geometrical change detection of the shaft walls. The paper describes two main problems of such an approach (aligning two potentially huge point clouds and automatic change detection by comparing the reconstructed volumes) and explains in detail the proposed solution. KW - signed distance KW - stereo camera KW - underground mining KW - change detection Y1 - 2020 U6 - https://doi.org/10.1109/SSRR50563.2020.9292618 SP - 360 EP - 365 PB - IEEE ER - TY - JOUR A1 - Mammen, Jan T1 - Wealth creation through corporate diversification – the bondholders’ perspective JF - Investment Management and Financial Innovations N2 - The influence of corporate diversification on firm value is an important field in strategy research. Studies in strategic management and finance research have analyzed value creation through product and geographic diversification from a shareholder’s perspective. This study completes this picture by analyzing the bondholders’ perspective. It is suggested that product diversification creates value for bondholders, while geographic diversification destroys bondholder value. The hypotheses are tested on a sample of S&P 1,200 firms in 2001–2011 using a fixed-effects panel model. Drawing on prior research, bondholder value creation is measured using the Merton model. The empirical results support the hypothesis that bondholders gain value through product diversification but lose value through geographic diversification. Considering prior research results, these results show that product diversification is preferable for bondholders, while geographic diversification is preferable from a shareholder’s perspective. The opposite effects of both diversification strategies on shareholders, respectively, bondholders offer an important new perspective on corporate diversification. The results show that firms with a high level of corporate debt should struggle to justify a strategy involving geographic dispersion of activities and support a more diversified product portfolio strategy. This study also offers several avenues for investigating the bondholder’s perspective on corporate diversification in more detail. Y1 - 2020 U6 - https://doi.org/10.21511/imfi.17(4).2020.09 SN - 1810-4967 VL - 17 IS - 4 SP - 94 EP - 101 PB - LLC CPC Business Perspectives ER - TY - CHAP A1 - Steinbrink, Marco A1 - Koch, Philipp A1 - May, Stefan A1 - Jung, Bernhard A1 - Schmidpeter, Michael T1 - State Machine for Arbitrary Robots for Exploration and Inspection Tasks T2 - Proceedings of the 2020 4th International Conference on Vision, Image and Signal Processing N2 - In this paper, a novel state machine for mobile robots is described that enables a direct use for exploration and inspection tasks. It offers a graphical user interface (GUI) to supervise the process and to issue commands if necessary. The state machine was developed for the open-source framework Robot Operating System (ROS) and can interface arbitrary algorithms for navigation and exploration. Interfaces to the commonly used ROS navigation stack and the explore_lite package are already included and can be utilized. In addition, routines for mapping and inspection can be added freely to adapt to the area of application. The state machine features a teleoperation mode to which it changes as soon as a respective command was issued. It also implements a software emergency stop and multiplexes all movement commands to the motor controller. To show the state machine's capabilities several simulations and real-world experiments are described in which it was used. KW - State Machine KW - Exploration KW - Inspection KW - Mobile Robotics Y1 - 2020 U6 - https://doi.org/10.1145/3448823.3448857 PB - ACM CY - New York, NY, USA ER - TY - CHAP A1 - Grandeit, Philipp A1 - Haberkern, Carolyn A1 - Lang, Maximiliane A1 - Albrecht, Jens A1 - Lehmann, Robert T1 - Using BERT for Qualitative Content Analysis in Psychosocial Online Counseling T2 - Proceedings of the Fourth Workshop on Natural Language Processing and Computational Social Science N2 - Qualitative content analysis is a systematic method commonly used in the social sciences to analyze textual data from interviews or online discussions. However, this method usually requires high expertise and manual effort because human coders need to read, interpret, and manually annotate text passages. This is especially true if the system of categories used for annotation is complex and semantically rich. Therefore, qualitative content analysis could benefit greatly from automated coding. In this work, we investigate the usage of machine learning-based text classification models for automatic coding in the area of psycho-social online counseling. We developed a system of over 50 categories to analyze counseling conversations, labeled over 10.000 text passages manually, and evaluated the performance of different machine learning-based classifiers against human coders. Y1 - 2020 U6 - https://doi.org/10.18653/v1/2020.nlpcss-1.2 SP - 11 EP - 23 PB - Association for Computational Linguistics CY - Stroudsburg, PA, USA ER - TY - JOUR A1 - Bechteler, Christian A1 - Kühl, Hannes A1 - Girmscheid, Ralf T1 - Morphology and structure characterization of ceramic granules JF - Journal of the European Ceramic Society N2 - For the production of brittle materials like technical ceramics it is important to prohibit big defects in the material to achieve high mechanical strength. Due to that already the granule properties are important because they can cause defects in the final product. Characterization and quantification of the granule properties are important steps for improving the production process and properties of the granules for further processing. In this work a novel method for the characterization and quantification of granule morphology, especially sphericity, and internal structure like the ratio of macro pores is provided via digital microscopy. The new quantitative characterization method can be done in an academic and industrial field with appropriate effort. Differences between granules can be characterized, quantified and be used for further development. KW - Granule characterization Morphology Sphericity Internal structure Pore ratio Digital microscopy Y1 - 2020 U6 - https://doi.org/10.1016/j.jeurceramsoc.2020.04.044 SN - 0955-2219 VL - 40 IS - 12 SP - 4232 EP - 4242 PB - Elsevier BV ER - TY - JOUR A1 - Krippner, Roland A1 - Bonfig, Peter T1 - The “Fassadenladen” (Facade Shutter) — A New Interpretation of the Window Shutter, with Biogenic Materials JF - Journal of Civil Engineering and Architecture N2 - As part of a collaborative project, we took the window shutter — a widely used traditional facade element — and reinterpreted it for “adaptive” solutions using new, sustainable technologies. The aim was to design a modular construction kit that varies radiant energy, light and air flow to weather conditions and occupant requirements in new and existing residential and office buildings. KW - Facades, sun protection, use of daylight, biogenic materials, residential and office buildings Y1 - 2020 U6 - https://doi.org/10.17265/1934-7359/2020.07.003 SN - 1934-7359 VL - 14 IS - 7 SP - 368 EP - 377 PB - David Publishing Company ER - TY - JOUR A1 - Richter, Kneginja A1 - Kellner, Stefanie A1 - Miloseva, Lence A1 - Frohnhofen, Helmut T1 - Therapie der Insomnie im höheren Lebensalter JF - Zeitschrift für Gerontologie und Geriatrie N2 - Die Insomnie ist eine der häufigsten Gesundheitsstörungen im höheren Lebensalter. Sie erzeugt Leidensdruck und verursacht zahlreiche gesundheitliche Probleme. Daher ist ihre Behandlung oft indiziert. Die Verhaltenstherapie ist auch bei älteren Menschen die Behandlung der Wahl. Zudem hat die Lichttherapie ihren Stellenwert. Pharmakologische Maßnahmen sind weniger gut untersucht, sind unklar in ihrem Nutzen bei einer Langzeitanwendung und sollten nur kurzfristig zur Reduktion von Leidensdruck sowie eingebunden in ein therapeutisches Gesamtkonzept zur Anwendung kommen. Y1 - 2020 U6 - https://doi.org/10.1007/s00391-019-01684-3 SN - 0948-6704 VL - 53 IS - 2 SP - 105 EP - 111 PB - Springer Science and Business Media LLC ER - TY - CHAP A1 - Bayerl, Sebastian P. A1 - Frassetto, Tommaso A1 - Jauernig, Patrick A1 - Riedhammer, Korbinian A1 - Sadeghi, Ahmad-Reza A1 - Schneider, Thomas A1 - Stapf, Emmanuel A1 - Weinert, Christian T1 - Offline Model Guard: Secure and Private ML on Mobile Devices T2 - 2020 Design, Automation & Test in Europe Conference & Exhibition (DATE) N2 - Performing machine learning tasks in mobile applications yields a challenging conflict of interest: highly sensitive client information (e.g., speech data) should remain private while also the intellectual property of service providers (e.g., model parameters) must be protected. Cryptographic techniques offer secure solutions for this, but have an unacceptable overhead and moreover require frequent network interaction.In this work, we design a practically efficient hardware-based solution. Specifically, we build OFFLINE MODEL GUARD (OMG) to enable privacy-preserving machine learning on the predominant mobile computing platform ARM—even in offline scenarios. By leveraging a trusted execution environment for strict hardware-enforced isolation from other system components, OMG guarantees privacy of client data, secrecy of provided models, and integrity of processing algorithms. Our prototype implementation on an ARM HiKey 960 development board performs privacy-preserving keyword recognition using TensorFlow Lite for Microcontrollers in real time. Y1 - 2020 U6 - https://doi.org/10.23919/DATE48585.2020.9116560 PB - IEEE ER - TY - JOUR A1 - Jung, Simon A1 - Peetz, Sebastian A1 - Koch, Michael T1 - POEAM – A Method for the Part Orientation Evaluation for Additive Manufacturing JF - HighTech and Innovation Journal N2 - In the industrial application of additive manufacturing processes, a significant amount of time and resources are dedicated to the orientation and pre-print setup of the geometry. Steps such as the generation of support structures and the process simulation are among the most time-consuming. For the thorough assessment of an orientation of a given geometry, even more criteria, like print time or surface quality, need to be considered. POEAM proposes a method for an efficient assessment of a set of orientations, by means of well formulated criteria and an early elimination of insufficient orientations. The goal is to narrow the search field, so costly preparation steps will only be performed on orientations that promise a superior end result. Furthermore, POEAM is an automated process, which means it can be performed with minimal human interaction, resulting in an optimum regarding cost-efficiency and evaluation time. The method was applied to a representative geometry and has shown results that confirm the above-mentioned advantages. KW - 3D -Print; Additive Manufacturing; Part Orientation; Pre-print; Simulation; AM; SLM Y1 - 2020 U6 - https://doi.org/10.28991/hij-2020-01-01-03 SN - 2723-9535 VL - 1 IS - 1 SP - 21 EP - 27 PB - Ital Publication ER - TY - CHAP A1 - Hummel, S. A1 - Betzold, C. A1 - Kandasamy, K. A1 - Bordin, Susanna A1 - Harhausen, G. A1 - Dentel, A. T1 - Experimentelle Validierung von Simulationsmodellen an einem Hardware-in-the-Loop Wärmepumpenprüfstand T2 - BauSIM 2020 N2 - Basierend auf einer experimentellen Messkampagne werden zwei Simulationsmodelle mit unterschiedlichen Modellierungstiefen, welche die Anlagenkomponenten einer Sole-Wasser-Wärmepumpe und eines thermischen Energiespeichers abbilden, validiert. Auf Grundlage von Referenzlastprofilen nach VDI 4655 werden Messungen an einem Hardware-in-the-Loop Wärmepumpenprüfstand unter realitätsnahen Betriebssituationen und Randbedingungen durchgeführt. Die Validierungsergebnisse zeigen generell eine hohe Genauigkeit des detaillierten Modells gegenüber den gemessenen Systemgrößen, aber auch dem vereinfachten Modell, auf. So können beispielsweise absolute Fehler im Ladezustand des Speichers von höchstens 7,2 Prozentpunkten und von der mittleren Speichertemperatur von 1,4 °C ermittelt werden. Der Einsatz des detaillierten Modells ist für eine zukünftige Entwicklung von Regelungsstrategien zu bevorzugen N2 - An experimental validation of two different kind of system simulation models, which both imply a brine/water heat pump as well as a thermal energy storage are carried out. Based on daily load profiles in accordance with VDI 4655, measurements on a hardware-in-the-loop heat pump test bench are performed to evaluate the system components under realistic operating conditions. The validation results confirm the high accuracy of the detailed system model compared to both our measured system parameters and the simplified model. An absolute error of the state of charge and the mean storage temperature of up to 7.2 percentage points and 1.4 °C is determined, respectively. The use of a detailed model for any further heat pump control development is recommended. Y1 - 2020 U6 - https://doi.org/10.3217/978-3-85125-786-1-35 SP - 299 EP - 306 ER - TY - CHAP A1 - Betzold, C. A1 - Dentel, A. A1 - Bordin, Susanna T1 - Entwicklung und Implementierung von Betriebsführungsstrategien in einem Plusenergiegebäude T2 - BauSIM 2020 N2 - Der steigende Einsatz erneuerbarer Energien im Wohnungsbau erfordert intelligente Lösungen, um die lokal erzeugte Energie vor Ort nutzen zu können. Das Ziel dieser Forschungsarbeit ist es, optimierte Betriebsführungsstrategien für modulierende Wärmepumpen (MWP) mit Speichern zu entwickeln und diese in einem Plusenergie-Reihenhauskomplex anzuwenden, um den Eigenverbrauch der Photovoltaikerzeugung (PV) und die Effizienz zu erhöhen. Der Betrieb und der Vergleich zweier optimierter Betriebsführung-sstrategien zeigen, dass beide einen ähnlich hohen PV-Eigenverbrauch erzielen, aber zu unterschiedlichen Arbeitszahlen führen. N2 - The increasing use of renewable energies in residential buildings requires intelligent solutions in order to be able to use the locally generated energy on site. The aim of this research is the development and the real application of optimized control strategies for modulating heat pumps (MHPs) with thermal storage tanks in plus energy terraced houses, built in 2017. The optimized control strategies aim an increase of PV self-consumption and efficiency. The operation and comparison of two optimized control strategies show, that both reach the same PV self-consumption but different seasonal perfomance factors. Y1 - 2020 U6 - https://doi.org/10.3217/978-3-85125-786-1-16 SP - 144 EP - 151 ER - TY - CHAP A1 - Bayerl, Sebastian P. A1 - Hönig, Florian A1 - Reister, Joelle A1 - Riedhammer, Korbinian T1 - Towards automated assessment of stuttering and stuttering therapy N2 - Stuttering is a complex speech disorder that can be identified by repetitions, prolongations of sounds, syllables or words and blocks while speaking. Severity assessment is usually done by a speech therapist. While attempts at automated assessment were made, it is rarely used in therapy. Common methods for the assessment of stuttering severity include percent stuttered syllables (% SS), the average of the three longest stuttering symptoms during a speech task or the recently introduced Speech Efficiency Score (SES). This paper introduces the Speech Control Index (SCI), a new method to evaluate the severity of stuttering. Unlike SES, it can also be used to assess therapy success for fluency shaping. We evaluate both SES and SCI on a new comprehensively labeled dataset containing stuttered German speech of clients prior to, during and after undergoing stuttering therapy. Phone alignments of an automatic speech recognition system are statistically evaluated in relation to their relative position to labeled stuttering events. The results indicate that phone length distributions differ in respect to their position in and around labeled stuttering events. KW - speech and voice disorders · pathological speech · language Y1 - 2020 U6 - https://doi.org/10.48550/arXiv.2006.09222 ER - TY - CHAP A1 - Mai, Annette A1 - Wagner, Bernhard A1 - Streit, Fabian T1 - Elimination of Current Harmonics in Electrical Machines with Iterative Learning Control N2 - The magnitude of current harmonics depends on the design of an electrical machine. By suppressing these harmonics noise can be reduced and efficiency improved. Iterative Learning Control (ILC) has proven effective in reducing harmonics. One of the challenges of working with ILC is operation at varying speeds. Variable speeds are particularly important for applications like automotive drives. The ILC period length changes during the learning process at varying speeds. Due to fixed sample rates, the number of values processed by the ILC varies with motor speed.This paper proposes a method to solve this problem and uses ILC at varying speeds. The ILC used to eliminate the harmonics is based on the inverse system. The usage of a two-dimensional memory array is proposed. This data structure holds rows for specific speeds between which interpolation is performed, enabling the elimination of errors which are periodically cyclic to one electrical rotation. This includes the reduction of the motor current harmonics. To verify the presented method a permanent magnet synchronous motor with distinctive 5th and 7th harmonics is used. In real-time implementations, limitations of memory and computational capacity occur. KW - Iterative Learning Control, Repetitive Control, Current Harmonics, PMSM, Motor Control Y1 - 2020 U6 - https://doi.org/10.1109/EDPC51184.2020.9388177 VL - 2020 ER - TY - CHAP A1 - Vasquez-Correa, J. C. A1 - Bocklet, Tobias A1 - Orozco-Arroyave, J. R. A1 - Nöth, E. T1 - Comparison of User Models Based on GMM-UBM and I-Vectors for Speech, Handwriting, and Gait Assessment of Parkinson’s Disease Patients T2 - ICASSP 2020 - 2020 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) N2 - Parkinson's disease is a neurodegenerative disorder characterized by the presence of different motor impairments. Information from speech, handwriting, and gait signals have been considered to evaluate the neurological state of the patients. On the other hand, user models based on Gaussian mixture models - universal background models (GMMUBM) and i-vectors are considered the state-of-the-art in biometric applications like speaker verification because they are able to model specific speaker traits. This study introduces the use of GMM-UBM and i-vectors to evaluate the neurological state of Parkinson's patients using information from speech, handwriting, and gait. The results show the importance of different feature sets from each type of signal in the assessment of the neurological state of the patients. KW - Parkinson’s disease KW - GMM-UBM KW - ivectors KW - gait analysis KW - handwriting analysis KW - speech analysis Y1 - 2020 SN - 978-1-5090-6631-5 U6 - https://doi.org/10.1109/icassp40776.2020.9054348 SP - 6544 EP - 6548 PB - IEEE ER - TY - JOUR A1 - Schuster, Maria A1 - Arias-Vergara, Tomás A1 - Müller-Hörner, Rainer A1 - Winterholler, Cordula A1 - Bocklet, Tobias T1 - "Verstehen mich mit der Maske eigentlich noch alle?" JF - Geriatrie-Report Y1 - 2020 U6 - https://doi.org/10.1007/s42090-020-0627-3 SN - 1862-5363 VL - 15 IS - 3 SP - 8 EP - 9 PB - Springer Science and Business Media LLC ER - TY - CHAP A1 - Georges, Munir A1 - Huang, Jonathan A1 - Bocklet, Tobias T1 - Compact Speaker Embedding: lrx-Vector BT - Proceedings of the Annual Conference of the International Speech Communication Association T2 - Interspeech 2020 N2 - Deep neural networks (DNN) have recently been widely used in speaker recognition systems, achieving state-of-the-art performance on various benchmarks. The x-vector architecture is especially popular in this research community, due to its excellent performance and manageable computational complexity. In this paper, we present the lrx-vector system, which is the low-rank factorized version of the x-vector embedding network. The primary objective of this topology is to further reduce the memory requirement of the speaker recognition system. We discuss the deployment of knowledge distillation for training the lrx-vector system and compare against low-rank factorization with SVD. On the VOiCES 2019 far-field corpus we were able to reduce the weights by 28% compared to the full-rank x-vector system while keeping the recognition rate constant (1.83% EER). KW - speaker recognition KW - x-vector KW - low power Y1 - 2020 U6 - https://doi.org/10.21437/interspeech.2020-2106 SN - 2958-1796 SP - 3236 EP - 3240 PB - ISCA CY - ISCA ER - TY - CHAP A1 - Chen, Wenda A1 - Huang, Jonathan A1 - Bocklet, Tobias T1 - Length- and Noise-Aware Training Techniques for Short-Utterance Speaker Recognition T2 - Interspeech 2020 N2 - Speaker recognition performance has been greatly improved with the emergence of deep learning. Deep neural networks show the capacity to effectively deal with impacts of noise and reverberation, making them attractive to far-field speaker recognition systems. The x-vector framework is a popular choice for generating speaker embeddings in recent literature due to its robust training mechanism and excellent performance in various test sets. In this paper, we start with early work on including invariant representation learning (IRL) to the loss function and modify the approach with centroid alignment (CA) and length variability cost (LVC) techniques to further improve robustness in noisy, far-field applications. This work mainly focuses on improvements for short-duration test utterances (1-8s). We also present improved results on long-duration tasks. In addition, this work discusses a novel self-attention mechanism. On the VOiCES far-field corpus, the combination of the proposed techniques achieves relative improvements of 7.0% for extremely short and 8.2% for full-duration test utterances on equal error rate (EER) over our baseline system. KW - speaker recognition KW - invariant representation learning KW - centroid alignment KW - x-vector KW - far-field Y1 - 2020 U6 - https://doi.org/10.21437/interspeech.2020-2872 SN - 2958-1796 SP - 3835 EP - 3839 PB - ISCA CY - ISCA ER - TY - JOUR A1 - Schuster, Maria A1 - Arias-Vergara, Tomas A1 - Müller-Hörner, Rainer A1 - Winterholler, Cordula A1 - Bocklet, Tobias T1 - Verstehen mich mit der Maske noch alle? T1 - Speech quality changes due to face masks BT - Coronavirus-Pandemie JF - MMW - Fortschritte der Medizin N2 - In Arztpraxen nimmt der Infektionsschutz mittels Mund-Nasen-Maske momentan eine zentrale Rolle ein. Wenig nachgedacht wird dabei über die Folgen für die Kommunikation. Gerade schwerhörigen Patienten bereiten gedämpfte Stimmen und abgedeckte Lippen Probleme. KW - Face mask, speech quality, computer-assisted speech assessment, hearing loss Y1 - 2020 U6 - https://doi.org/10.1007/s15006-020-0749-4 VL - 162 IS - 14 SP - 42 EP - 44 ER - TY - CHAP A1 - Lopatka, Kuba A1 - Bocklet, Tobias T1 - State Sequence Pooling Training of Acoustic Models for Keyword Spotting T2 - Proceedings Interspeech 2020 N2 - We propose a new training method to improve HMM-based keyword spotting. The loss function is based on a score computed with the keyword/filler model from the entire input sequence. It is equivalent to max/attention pooling but is based on prior acoustic knowledge. We also employ a multi-task learning setup by predicting both LVCSR and keyword posteriors. We compare our model to a baseline trained on frame-wise cross entropy, with and without per-class weighting. We employ a low-footprint TDNN for acoustic modeling. The proposed training yields significant and consistent improvement over the baseline in adverse noise conditions. The FRR on cafeteria noise is reduced from 13.07% to 5.28% at 9 dB SNR and from 37.44% to 6.78% at 5 dB SNR. We obtain these results with only 600 unique training keyword samples. The training method is independent of the frontend and acoustic model topology. KW - keyword spotting, machine learning, speech recognition Y1 - 2020 U6 - https://doi.org/10.21437/Interspeech.2020-2722 SN - 2958-1796 SP - 4338 EP - 4342 ER - TY - CHAP A1 - Georges, Munir A1 - Huang, Jonathan A1 - Bocklet, Tobias T1 - Compact Speaker Embedding BT - lrx-vector N2 - Deep neural networks (DNN) have recently been widely used in speaker recognition systems, achieving state-of-the-art performance on various benchmarks. The x-vector architecture is especially popular in this research community, due to its excellent performance and manageable computational complexity. In this paper, we present the lrx-vector system, which is the low-rank factorized version of the x-vector embedding network. The primary objective of this topology is to further reduce the memory requirement of the speaker recognition system. We discuss the deployment of knowledge distillation for training the lrx-vector system and compare against low-rank factorization with SVD. On the VOiCES 2019 far-field corpus we were able to reduce the weights by 28% compared to the full-rank x-vector system while keeping the recognition rate constant (1.83% EER). KW - speaker recognition, x-vector, low power Y1 - 2020 U6 - https://doi.org/10.48550/arXiv.2008.05011 ER - TY - CHAP A1 - Chen, Wenda A1 - Huang, Jonathan A1 - Bocklet, Tobias T1 - Length-and Noise-aware Training Techniques for Short-utterance Speaker Recognition N2 - Speaker recognition performance has been greatly improved with the emergence of deep learning. Deep neural networks show the capacity to effectively deal with impacts of noise and reverberation, making them attractive to far-field speaker recognition systems. The x-vector framework is a popular choice for generating speaker embeddings in recent literature due to its robust training mechanism and excellent performance in various test sets. In this paper, we start with early work on including invariant representation learning (IRL) to the loss function and modify the approach with centroid alignment (CA) and length variability cost (LVC) techniques to further improve robustness in noisy, far-field applications. This work mainly focuses on improvements for short-duration test utterances (1-8s). We also present improved results on long-duration tasks. In addition, this work discusses a novel self-attention mechanism. On the VOiCES far-field corpus, the combination of the proposed techniques achieves relative improvements of 7.0% for extremely short and 8.2% for full-duration test utterances on equal error rate (EER) over our baseline system. KW - speaker recognition, invariant representation learning, centroid alignment, x-vector, far-field Y1 - 2020 U6 - https://doi.org/10.48550/arXiv.2008.12218 ER - TY - JOUR A1 - Schkutow, Andreas A1 - Scholle, Karsten A1 - Fuhrberg, Peter A1 - Frick, Thomas T1 - Scanning techniques for optimized damage tolerance in quasi-simultaneous laser transmission welding of plastics JF - Procedia CIRP N2 - Fiber lasers are increasingly replacing the commonly used diode lasers in laser transmission welding of plastics for challenging applications due to their superior beam quality and the ability to use long working distances and small spot sizes. At the same time, these smaller spot sizes increase the risk of thermal degradation. In this work, we investigate different scanning strategies that allow controlling the weld seam widths. These strategies are characterized regarding the demands on the performance of the scanner system, the risk of thermal degradation and the mechanical properties of the resulting welds. KW - laser transmission welding; quasi-simultaneous welding; irradiation strategies; offset-scanning technique; thermal degradation Y1 - 2020 U6 - https://doi.org/10.1016/j.procir.2020.09.120 SN - 2212-8271 VL - 94 SP - 697 EP - 701 PB - Elsevier BV ER - TY - JOUR A1 - Ebinger, Frank A1 - Omondi, Bramwel T1 - Leveraging Digital Approaches for Transparency in Sustainable Supply Chains BT - A Conceptual Paper JF - Sustainability N2 - With the growing global interdependence of companies, their scope of responsibility for the environmental, social, and human rights impacts associated with their activities is also growing. In this context, companies are increasingly held accountable for social and ecological issues that lie within the sphere of action of their suppliers and sub-suppliers. They are thus faced with the challenge of meeting these demands for transparency, traceability, and compliance with standards in their Supply Chains (SCs). Based on the theoretical framework of Sustainable Supply Chain Transparency (SSCT) in Sustainable Supply Chain Management (SSCM), this conceptual article aims at initiating the discussion on digitalization in SSCM. Therefore, a heuristical research framework, based on relevant fields in the management of sustainability oriented transparency (governance, cooperation and partner selection, traceability/tracking, and strategic and operational risk assessment) is developed. In relation to these fields, consequently, data-driven digital approaches are identified to which potentials for SSCT and control can be attributed. This initial analysis of existing digital approaches already shows that the market is developing dynamically, but is driven more by individual initiatives. In many cases, the approaches used so far are still in the trial phase or offer only limited solutions. Therefore, this paper contributes by giving an overview of the current application of the digitalization approaches in SSCM pinning our discussion on SSCT dimensions. KW - sustainable supply chain management; data-driven technologies; sustainable supply chain transparency; blockchain technology; artificial intelligence; cloud-computing Y1 - 2020 U6 - https://doi.org/10.3390/su12156129 SN - 2071-1050 VL - 12 IS - 15 PB - MDPI AG ER - TY - JOUR A1 - Fuhrberg, Peter A1 - Ahrens, Anja A1 - Schkutow, Andreas A1 - Frick, Thomas T1 - 2.0 μm Laser Transmission Welding BT - Welding of transparent and opaque polymers with single‐mode Tm‐doped fiber lasers JF - PhotonicsViews N2 - 2.0 μm fiber lasers provide a high beam quality and a high‐power output, which makes them ideal for welding and cutting a wide variety of commercially used plastics, as well as marking plastics, metals or even food. At 2.0 μm wavelength the intrinsic absorption of most thermoplastics is high enough to weld or cut without applying any absorbent additives or coatings. Compared to commonly used near‐infrared systems, welding with 2.0 μm lasers can improve heat distribution and gap bridging and enable transmission welding for challenging materials. Y1 - 2020 U6 - https://doi.org/10.1002/phvs.202000013 SN - 2626-1294 VL - 17 IS - 2 SP - 64 EP - 68 PB - Wiley ER - TY - CHAP A1 - Brost, Julian A1 - Egger, Christoph A1 - Lai, Russell A1 - Schmid, Fritz A1 - Schröder, Dominique A1 - Zoppelt, Markus T1 - Threshold Password-Hardened Encryption Services N2 - Password-hardened encryption (PHE) was introduced by Lai et al. at USENIX 2018 and immediately productized by VirgilSecurity. PHE is a password-based key derivation protocol that involves an oblivious external crypto service for key derivation. The security of PHE protects against offline brute-force attacks, even when the attacker is given the entire database. Furthermore, the crypto service neither learns the derived key nor the password. PHE supports key-rotation meaning that both the server and crypto service can update their keys without involving the user. While PHE significantly strengthens data security, it introduces a single point of failure because key-derivation always requires access to the crypto service. In this work, we address this issue and simultaneously increase security by introducing threshold password-hardened encryption. Our formalization of this primitive revealed shortcomings of the original PHE definition that we also address in this work. Following the spirit of prior works, we give a simple and efficient construction using lightweight tools only. We also implement our construction and evaluate its efficiency. Our experiments confirm the practical efficiency of our scheme and show that it is more efficient than common memory-hard functions, such as scrypt. From a practical perspective this means that threshold PHE can be used as an alternative to scrypt for password protection and key-derivation, offering better security in terms of offline brute force attacks. CCS CONCEPTS • Security and privacy → Cryptography. Y1 - 2020 U6 - https://doi.org/10.1145/3372297.3417266 SP - 409 EP - 424 PB - ACM ER - TY - CHAP A1 - Gerstner, Michael A1 - Maerz, Martin A1 - Dietz, Armin T1 - Reconfigurable Transformer for Wide Input Voltage Range DC/DC Converters T2 - 2020 IEEE 9th International Power Electronics and Motion Control Conference (IPEMC2020-ECCE Asia) N2 - A transformer with variable primary windings for wide input voltage range DC/DC converters is presented. This transformer structure allows three states of the primary winding to be converted by only two individual windings. Based on the evaluations of a two-switch flyback converter, the potential of DC/DC converters with variable structures, the implementation of such a transformer and the advantages and disadvantages are shown and discussed. Real measurement results demonstrate the noticeable increase in efficiency and the reduction in component stress, having a positive influence on the operation of the converter and the component selection during the design process. KW - DC/DC converter ; efficiency ; tapped transformer ; wide input voltage range Y1 - 2020 U6 - https://doi.org/10.1109/ipemc-ecceasia48364.2020.9367869 PB - IEEE ER - TY - JOUR A1 - Weiland, J. A1 - Luber, M. A1 - Seewald, R. A1 - Schiebahn, A. A1 - Engelbrecht, Rainer A1 - Reisgen, U. T1 - Structural Health Monitoring of Adhesively Bonded Joints: Proposing a new Method by use of Polymer Optical Fibers JF - Procedia Structural Integrity N2 - According to the current state of the art, adhesively bonded joints cannot be tested completely non-destructively. This is the main motivation to permanently monitor adhesively bonded joints in order to record their structural integrity and - as a result - to ensure safe load transmission. By the use of permanent non-destructive Structural Health Monitoring (SHM) methods, structural damages in the adhesive bond can be detected at an early stage. This paper presents a new method for monitoring the structural integrity of adhesively bonded joints by integrating a Polymer Optical Fiber (POF) into the adhesive layer. The sensor concept is based on a deformation transfer from the adhesive to the POF, which results in a change in the cross-sectional shape of the POF. The cross-sectional shape influences the optical light propagation in the POF, which can be detected by simple optical measuring devices. The paper describes the general principle and first results of investigations on a structural adhesive (3M Scotch-Weld DP 609). The sensor signal is in a good relation to the stress state of the adhesive layer. KW - adhesive bonding structural health monitoring polymer optical fiber single lap joint Y1 - 2020 U6 - https://doi.org/10.1016/j.prostr.2020.11.106 SN - 2452-3216 VL - 28 SP - 1249 EP - 1257 PB - Elsevier BV ER - TY - JOUR A1 - Heenemann, Maria A1 - Millet, Marie-Mathilde A1 - Girgsdies, Frank A1 - Eichelbaum, Maik A1 - Risse, Thomas A1 - Schlögl, Robert A1 - Jones, Travis A1 - Frei, Elias T1 - The Mechanism of Interfacial CO2 Activation on Al Doped Cu/ZnO JF - ACS Catalysis N2 - We report on a combined quantitative charge carrier and catalytic activity analysis of Cu/ZnO(:Al) model catalysts. The promoting effect of Al3+ on the ZnO support for CO2 activation via the reverse water–gas-shift reaction has been investigated. The contact-free and operando microwave Hall Effect technique is applied to measure charge carriers in Cu/ZnO(:Al) based model catalysts under reverse water–gas shift reaction conditions. This method allows us to monitor the electrical conductivity, charge carrier mobility, and absolute number of charge carriers. An increase in charge carrier concentration with increasing Al3+ content and its direct correlation with the catalytic activity for CO formation is found. We conclude that the increased availability of charge carriers plays a key role in CO2 activation and CO formation, which finds additional support in a concurrent decrease of the apparent activation energy and increase in the reaction order of CO2. In combination with comprehensive DFT calculations, the impact of the interfacial charge transfer, coupled to oxygen defect sites in ZnO and CO2 adsorption properties, is elucidated and highlighted. In conclusion, the results from this operando investigation combined with DFT calculations demonstrate the importance of charge transfer processes as decisive descriptors for understanding and explaining catalytic properties. KW - CO2 activation Al doped Cu/ZnO charge carrier quantification Cu−ZnO interface rWGS activity Y1 - 2020 U6 - https://doi.org/10.1021/acscatal.0c00574 SN - 2155-5435 VL - 10 IS - 10 SP - 5672 EP - 5680 PB - American Chemical Society (ACS) ER - TY - CHAP A1 - Schindler, Tobias A1 - Dietz, Armin T1 - Real-Time Inference of Neural Networks on FPGAs for Motor Control Applications T2 - 2020 10th International Electric Drives Production Conference (EDPC) N2 - Machine learning algorithms are increasingly used in industrial applications for a multitude of use-cases. However, using them in control tasks is a challenge due to real-time requirements and limited resources. In this paper, an implementation scheme for real-time inference of multilayer perceptron (MLP) neural networks on FPGAs is proposed. Design constraints for using MLPs in reinforcement learning agents for motor control applications are derived and accounted for in the implementation. Two MLP architectures are evaluated on an FPGA, and the timing and resource-usage data are reported. The real-time capability of the implementation for motor control applications is investigated for standard control frequencies. It is shown by experimental validation that real-time interference with an area-efficient implementation for motor control applications is achievable. Therefore, the proposed implementation scheme can be applied to deep reinforcement learning controllers with hard real-time requirements. Y1 - 2020 U6 - https://doi.org/10.1109/edpc51184.2020.9388185 SP - 1 EP - 6 PB - IEEE ER - TY - CHAP A1 - Dernbach, Beatrice T1 - Ernährung als Medienthema BT - Einordnung und Herausforderungen des Foodjournalismus T2 - Ernährungskommunikation Y1 - 2020 SN - 9783658273156 U6 - https://doi.org/10.1007/978-3-658-27315-6_15-1 SP - 1 EP - 14 PB - Springer Fachmedien Wiesbaden CY - Wiesbaden ER - TY - CHAP A1 - Gerstner, Michael A1 - Maerz, Martin A1 - Dietz, Armin T1 - Design of a Wide Input Voltage Range Current-Fed DC/DC Converter Within a Reduced Duty-Cycle Range T2 - 2020 22nd European Conference on Power Electronics and Applications (EPE'20 ECCE Europe) N2 - A design of a current-fed push-pull converter for wide input voltage ranges within a reduced duty-cycle range is presented. Based on the converter conversion ratios of three different clamping configurations, the potential of the input clamping is shown analytical, simulative and by measurements. A differentiation is made between the four possible operating modes, which can be distinguished in the control of the semiconductors and the magnetomotive force in the reactor. By optimizing the turn ratios of both transformers, the wide input voltage range capability of the input clamped current-fed push-pull converter was improved, which has been proved by measurements on a real prototype. KW - DC power supply ; Design ; Converter circuit ; Measurement ; Power Supply Y1 - 2020 U6 - https://doi.org/10.23919/epe20ecceeurope43536.2020.9215825 PB - IEEE ER - TY - CHAP A1 - Rabenstein, Lukas A1 - Dietz, Armin A1 - Parspour, Nejila T1 - Design Concept of a Wound Field Transverse Flux Machine using Soft Magnetic Composite Claw-Poles T2 - 2020 10th International Electric Drives Production Conference (EDPC) N2 - This paper presents the machine concept of a wound field transverse flux machine (WFTFM). In contrast to permanent magnet transverse flux machines (PMTFM), here the magneto motive force (mmf) of the rotor is generated by a current. The magnetic circuit of the WFTFM is made of soft magnetic composite (SMC) and is designed as claw-poles. Thus the magnetic circuit consists of only a few components. Together with the simple ring coils in stator and rotor, the WFTFM offers advantages in the production of electrical machines. The basic structure of the machine and a first design is described here. The results generated by numerical three-dimensional finite element analysis (FEA) are compared with those of conventional machines. Y1 - 2021 U6 - https://doi.org/10.1109/edpc51184.2020.9388176 PB - IEEE ER - TY - JOUR A1 - Dietz, Armin A1 - Di Tommaso, Antonino Oscar A1 - Marignetti, Fabrizio A1 - Miceli, Rosario A1 - Nevoloso, Claudio T1 - Enhanced Flexible Algorithm for the Optimization of Slot Filling Factors in Electrical Machines JF - Energies N2 - The continuous development in the field of industrial automation and electric mobility has led to the need for more efficient electrical machines with a high power density. The improvement of electrical machines’ slot filling factors is one of the measures to satisfy these requirements. In recent years, this topic has aroused greater interest in the industrial sector, since the evolution of the winding technological manufacturing processes allows an economically sustainable realization of ordered winding arrangements, rather than random ones. Moreover, the manufacture of electrical machines’ windings must be preceded by an accurate design phase in which it is possible to evaluate the maximum slot filling factor obtainable for a given wire shape and for its dimensions. For this purpose, this paper presents an algorithmic approach for the evaluation of maximum slot filling factors in electrical machines under an ideal geometric premise. In particular, this algorithm has a greater degree of flexibility with respect to the algorithm approaches found in the literature, since the study has been extended to round, rectangular and hexagonal wire sections. Furthermore, the slot filling factor calculation was carried out both for standard and non-standard slots. The algorithmic approach proposed can be considered as an additional useful tool for the fast design of electrical machine windings. KW - electrical motors; sot filling factor; optimization algorithm; windings; magnetic wire; filling factor optimization Y1 - 2020 U6 - https://doi.org/10.3390/en13051041 SN - 1996-1073 VL - 13 IS - 5 PB - MDPI AG ER - TY - CHAP A1 - Dietz, Armin A1 - Caruso, M. A1 - Di Tommaso, A. O. A1 - Miceli, R. A1 - Nevoloso, C. T1 - Enhanced Mathematical Modelling of Interior Permanent Magnet Synchronous Machine Considering Saturation, Cross-Coupling and Spatial Harmonics effects T2 - 2020 Fifteenth International Conference on Ecological Vehicles and Renewable Energies (EVER) N2 - The Interior Permanent Magnet Synchronous machine (IPMSM) conventional mathematical model is generally employed to investigate and simulate the IPMSM control and drive system behaviour. However, magnetic nonlinearities and spatial harmonics have a substantial influence on the IPMSM electromagnetic behaviour and performances. In order to simulate the IPMSM real electromagnetic behaviour, this paper describes an enhanced mathematical model that takes into account the saturation, cross-coupling and spatial harmonics effects. This model has been implemented in Matlab®/Simulink environment where the electric and magnetic parameters are derived from FEA investigations and implemented by the use of lookup tables. The high fidelity of the proposed IPMSM Simulink model is validated by the results of the FEA investigations carried out. KW - Finite Element Analysis (FEA); Interior Permanent Magnet Synchronous Machine (IPMSM); saturation; cross- coupling; spatial harmonics Y1 - 2020 U6 - https://doi.org/10.1109/ever48776.2020.9243003 PB - IEEE ER - TY - CHAP A1 - Schier, Michael A1 - Epple, Fabius A1 - Maaoui, Aicha A1 - Schwellinger, Martin A1 - Weber, Michael A1 - Dietz, Armin A1 - Zimmermann, Rolf T1 - Development of a Two In One Motor System as a new Vehicle Energy Concept for Next Generation Car T2 - 2020 Fifteenth International Conference on Ecological Vehicles and Renewable Energies (EVER) KW - Air conditioning;Electric potential;Biological system modeling;Production;Automobiles;Next generation networking;Engines Y1 - 2020 U6 - https://doi.org/10.1109/ever48776.2020.9243148 PB - IEEE ER - TY - JOUR A1 - Freier, Carolin T1 - Wandel sozialwirtschaftlicher Arbeitswelt JF - Sozialwirtschaft aktuell Y1 - 2020 U6 - https://doi.org/10.5771/1619-2427-2020-18-1-1 SN - 1619-2427 VL - 30 IS - 18 SP - 1 EP - 3 PB - Nomos Verlag ER - TY - CHAP A1 - Bikas, Georgios A1 - Weigand, Peter A1 - Brilz, Marina A1 - Michos, Konstantinos T1 - High Resolution Global NOx Sub-Model for Embedded System Application with Low Calibration Effort T2 - SAE Technical Paper Series Y1 - 2020 U6 - https://doi.org/10.4271/2020-01-0246 SN - 0148-7191 PB - SAE International CY - 400 Commonwealth Drive, Warrendale, PA, United States ER - TY - JOUR A1 - Bogdanski, Ralf A1 - Cailliau, Cathrin T1 - Wie das Lastenrad die Letzte Meile gewinnen kann BT - Potentiale und kritische Erfolgsfaktoren JF - Journal für Mobilität und Verkehr N2 - Lastenräder sind im Stadtverkehr noch eine Marktnische, sollen aber künftig fester Bestandteil der „Verkehrswende“ sein. So formulierte der Bundesverkehrsminister auf dem Nationalen Radverkehrskongress in Dresden im Mai 2019 als drittes Leitziel für den nächsten Nationalen Radverkehrsplan: „Urbane Lastenverkehre werden Radverkehre“ (BMVI, 2019). Das Verlagerungspotential im urbanen Wirtschaftsverkehr wird mit 20 % beziffert (Gruber & Rudolph 2016), in der Kurier-, Express- und Paket-Branche (KEP) sogar mit 30 % (Bogdanski et al., 2018). Zur Zielerreichung müssen drei kritische Erfolgsfaktoren berücksichtigt werden – wirtschaftliche Logistikkonzepte, logistikgerechte Lastenräder und eine dazu passende urbane Verkehrsinfrastruktur. In diesem Spannungsfeld ergibt sich eine Vielzahl von Handlungsnotwendigkeiten. Weiterhin bestehen urbane Lastenverkehre nur zu einem Teil aus KEP-Verkehren. Welche Potentiale schwere Lastenräder für andere Anwendungen im Lastenverkehr bieten, erörtert das Forschungsprojekt „PedeListics“ mit Kommunen und Unternehmen als Praxispartnern. KW - Nachhaltige Stadtlogistik, Lastenrad, Citylogistik, Mikro-Depot-Konzept Y1 - 2020 U6 - https://doi.org/10.34647/jmv.nr5.id36 SN - 2628-4154 IS - 5 SP - 22 EP - 29 PB - Sachsische Landesbibliothek, Staats- und Universitatsbibliothek Dresden ER - TY - JOUR A1 - Michos, Konstantinos N. A1 - Bikas, Georgios T1 - Quasi-Dimensional Multi-Zone Combustion Diagnostic Tool for SI Engines with Novel NOx and CO Emissions Models JF - SAE International Journal of Advances and Current Practices in Mobility N2 - <div class="section abstract"<div class="htmlview paragraph"In this work a quasi-dimensional multi-zone combustion diagnostic tool for homogeneous charge Spark Ignition (SI) engines is analytically developed for the evaluation of heat release, flame propagation, combustion velocities as well as engine-out NOx and CO emissions, based on in-cylinder pressure data analysis. The tool can be used to assess the effects of fuel, design and operating parameters on the SI engine combustion and NOx and CO emissions formation processes.</div<div class="htmlview paragraph"Certain novel features are included in the presently developed combustion diagnostic tool. Firstly, combustion chambers of any shape and spark plug position can be considered due to an advanced model for the calculation of the geometric interaction between a spherically expanding flame and a general combustion chamber geometry. Also, the temperature stratification of the burned gas developed during the combustion phase, which has to be captured for the theoretically realistic estimation of the in-cylinder formation of pollutant emissions, is taken into account by a multi-zone thermodynamic treatment. According to this, multiple spherically allocated burned zones are sequentially generated at specified (user-defined) crank angle intervals, forming overlapping shells. Moreover, complex chemical equilibrium compositions are computed, which can include any user-defined mixture of species in the combustion products, using an advanced modular method based on the minimization of Gibbs energy. Furthermore, NOx and CO engine-out emissions are calculated based on novel in-cylinder formation models presented by the authors in the past. Specifically, NOx emissions are evaluated by a global algebraic NOx emissions formation model, accounting for both thermal and N<sub2</subO pathway NO formation, based on the calculation of the characteristic timescales of the relevant NO formation mechanisms. CO emissions are assessed using a new kinetics-based model, consisting of a single Ordinary Differential Equation (ODE) that can be analytically integrated. The CO emissions model is derived considering the dynamics of a representative pool of active radicals in post-flame gases and explicitly describes the CO oxidation quenching process.</div<div class="htmlview paragraph"The combustion diagnostic tool is applied to a lean burn gas engine at various engine speeds under full load conditions and constant lambda value. Various combustion and NOx and CO emissions related results are presented and discussed to illustrate the capabilities of the tool for combustion diagnosis, while at the same time calculated engine-out NOx and CO emissions are found to be in satisfactory agreement with measured ones.</div</div Y1 - 2020 U6 - https://doi.org/10.4271/2020-01-0289 SN - 2641-9645 VL - 2 IS - 4 SP - 1818 EP - 1848 PB - SAE International ER - TY - JOUR A1 - Papastavrou, Areti A1 - Schmidt, Ina A1 - Steinmann, Paul T1 - On biological availability dependent bone remodeling JF - Computer Methods in Biomechanics and Biomedical Engineering N2 - Modeling the evolution of bone density is relevant for understanding, simulation and possible prediction of bone response to external and internal influences. In this work we present a formulation for the bone density evolution process that takes into account not only the commonly considered mechanical stimulus, but, as novelty, also the influence of the availability of nutrients and hormones, with its implementation pursued within the finite element method. A simple uni-axial extension test is used to illustrate and compare our novel model against the classical approach. The results of the proposed modified model are promising for application to real-life problems. KW - bone remodeling KW - density change KW - finite element method Y1 - 2020 U6 - https://doi.org/10.1080/10255842.2020.1736050 SN - 1476-8259 VL - 23 (2020) PB - Informa UK Limited ER - TY - GEN A1 - Stoll, Joachim T1 - COVID 19 - Stop the Hurricane (15.11./18.10.2020) N2 - Die Performance der Kontaktverfolgung, Isolation und Quarantäne bleibt deutlich hinter den Möglichkeiten zurück und trägt zu wenig zur Reduktion der Reproduktionszahlen bei. In Kombination mit einer nachlassenden Mitwirkung der Bevölkerung könnte bald ein Punkt erreicht sein, an dem wir nur noch auf die Impfung warten können. Wir müssen schnellstmöglich auf ein Niveau der Neuinfektionen zurückzukehren, auf dem die Gesundheitsämter einen Beitrag leisten können. Wir brauchen eine Stelle, die für durchgängig (!) pfeilschnelle (!) Abläufe im Gesamtprozess (Test-Zugang, schnellste Auswertung und Mitteilung von Testergebnissen, umgehende Isolierung, Kontaktverfolgung, Testung der Kontakte sowie wirksame Quarantäne.) verantwortlich zeichnet. Dabei sollten Kompetenzen zu Management, Organisation, zeitlichen Abläufen, 24/7-Betrieb, Drive-In-Testing, detektivischer Arbeit, IT-Einsatz und mathematisch basierter Optimierung des Gesamtprozesses im Vordergrund stehen. KW - COVID 19 KW - SARS-CoV-2 KW - Kontaktverfolgung KW - Konzept KW - Infektionskrankheit KW - Pandemie KW - Sozialer Kontakt KW - Strategie Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6778 ER - TY - BOOK ED - Sowa, Frank ED - Zitzmann, Christina T1 - Anders lehren und lernen BT - Forschendes Service Learning über Lebenswelten von Menschen in Wohnungsnot KW - Entdeckendes Lernen KW - Service Learning KW - Sozialarbeit KW - Obdachlosigkeit KW - Hochschuldidaktik Y1 - 2020 UR - https://ebookcentral.proquest.com/lib/thnuernberg/detail.action?docID=6341751 SN - 978-3-7344-1065-9 N1 - Belegexemplar PB - Wochenschau-Verl. CY - Frankfurt a. M. ER - TY - CHAP A1 - Langguth, Christoph T1 - Potential- und Speicheranalyse im Bereich regenerative Energien in Oberfranken (Abschlussbericht) N2 - Im Folgenden werden die Fragestellungen aufgeführt, welche sich aus dem Ablauf ergeben und welche im Laufe des Projekts geklärt werden sollen: 1) Wie viel Strom wird heute im Untersuchungsgebiet verbraucht (Zuhilfenahme der Bachelorarbeit von Fr. Katharina Will)? 2) Wie viele Windkraft-, Wasserkraft-, Bio-/ Klärgas-, Photovoltaik- und Speicheranlagen bestehen bereits heute und wie viel Strom wird dadurch erzeugt und speichertechnisch umgesetzt? 3) Welche Jahre von 1980 bis 2019 sind die wettertechnisch ungünstigsten für die Nutzung von Windkraft und Photovoltaik? 4) Wie viel Strom muss noch zusätzlich aus Sonnen- und Windkraft erzeugt werden, um den gegenwärtigen Strombedarf aus reinen regenerativen Quellen zu decken? Wie kann diese regenerative Energieversorgung, unter Berücksichtigung der geringsten Stromgestehungskosten und der wettertechnisch ungünstigsten Zeiträume, zu den bereits bestehenden Energiespeichern ausgelegt werden? 5) Wie ist der aktuelle Stand der Technik bzgl. Photovoltaik und wie hoch sind die Kosten für solche Anlagen? T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 4,7 KW - Erneuerbare Energien KW - Sonnenenergie KW - Europäische Metropolregion Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6697 ER - TY - GEN A1 - Langguth, Christoph T1 - Vortrag Potential- und Speicheranalyse im Bereich regenerative Energien in Oberfranken (Präsentation) N2 - Im Vortragsverlauf werden die Fragestellungen aufgeführt, welche im Laufe des Projekts geklärt wurden: 1) Wie viel Strom wird heute im Untersuchungsgebiet verbraucht (Zuhilfenahme der Bachelorarbeit von Fr. Katharina Will)? 2) Wie viele Windkraft-, Wasserkraft-, Bio-/ Klärgas-, Photovoltaik- und Speicheranlagen bestehen bereits heute und wie viel Strom wird dadurch erzeugt und speichertechnisch umgesetzt? 3) Welche Jahre von 1980 bis 2019 sind die wettertechnisch ungünstigsten für die Nutzung von Windkraft und Photovoltaik? 4) Wie viel Strom muss noch zusätzlich aus Sonnen- und Windkraft erzeugt werden, um den gegenwärtigen Strombedarf aus reinen regenerativen Quellen zu decken? Wie kann diese regenerative Energieversorgung, unter Berücksichtigung der geringsten Stromgestehungskosten und der wettertechnisch ungünstigsten Zeiträume, zu den bereits bestehenden Energiespeichern ausgelegt werden? 5) Wie ist der aktuelle Stand der Technik bzgl. Photovoltaik und wie hoch sind die Kosten für solche Anlagen? T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 3,7 KW - Erneuerbare Energien KW - Sonnenenergie KW - Europäische Metropolregion Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6718 ER - TY - CHAP A1 - Müller, Nina T1 - Regenerative Selbstversorgung eines Untersuchungsgebietes der Metropolregion Nürnberg (Abschlussbericht) N2 - Analyse des besten Stromversorgungsmix des Untersuchungsgebietes um Ansbach durch reine regenerative Stromversorgung, anhand des ungünstigsten Wetterjahres der letzten 40 Jahre mit Vertiefung der aktuellen Technik der Wasserkraft in der gesamten Metropolregion Nürnberg wie auch der Kostenfaktoren für Laufwasserkraftwerke T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 4,5 KW - regenerative Energien KW - Laufwasserkraftwerk KW - Europäische Metropolregion Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6666 ER - TY - CHAP A1 - Geißendörfer, Jakob T1 - Potential-,Speicher- und Verbrauchsanalyse einer regenerativen Energieversorgung und Darstellung der Power-to-X-to-Power-Technologie (Abschlussbericht) BT - Untersuchung der regenerativen Energieversorgung und des Energieverbrauchs in einer Teilregion von Mittelfranken, Ermittlung eines optimalen Energiemix der Erneuerbaren Energien und Darstellung von Energiespeichermethoden N2 - Das Projekt wird im Rahmen des Seminars „Projekt Energietechnik“ des sechsten Semesters Maschinenbau an der Technischen Hochschule Nürnberg durchgeführt. Die Projektarbeit untersucht die Möglichkeiten einer autarken regenerativen Energieversorgung in einer mittelfränkischen Region. Hierbei wird einerseits das Energieerzeugungspotential der Energieträger Wind, Sonne, Biomasse und Laufwasser und andererseits der Verbrauch des Untersuchungsgebiets analysiert. Bei der Gegenüberstellung der Jahreswerte für die Energieerzeugung und des Energieverbrauchs von 1980 bis 2019 fällt der volatile Verlauf der Zeitreihen auf. Um die Überschüsse in der Erzeugung besser ausnutzen zu können und gleichzeitig die Defizite decken zu können, werden mehrere Speichertechnologien verglichen. Mit Hilfe eines Excel-Tools von Herrn Prof. Dr. Popp werden Daten der letzten 40 Jahre analysiert und verrechnet. Dabei werden die Jahre mit extremen Energiedefiziten herausgefunden, in denen die größten Speicherleerungen stattfinden. Daraus kann man schließen, dass die Untersuchungsregion Speicher-technologien für die Deckung der Energiedefizite vorhalten muss, um die benötigte Energiemenge für den Verbrauch bereitzustellen. Des Weiteren wird mit Hilfe des Programms ein optimaler Mix der Erneuerbaren Energieträger berechnet. Zudem lassen sich für deren Ausbau kostenminimale Lösungen errechnen. Im Folgenden lassen sich konkrete Werte für den zahlenmäßigen Ausbau der Anlagen geben. Außerdem behandelt diese Projektarbeit die Speichertechnologie Power-to-Gas-toPower ausführlicher. Es sollen das Prinzip, die Funktions-weise, die Verfahren und die Kosten dargestellt werden. Die Behandlung der Vor- und Nachteile und die Entwicklung in der Zukunft werden abschließend betrachtet. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 4,1 KW - regenerative Energien KW - Power-to-X KW - Energieversorgung KW - Klimawandel Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6636 ER - TY - GEN A1 - Geißendörfer, Jakob T1 - Analyse der Speicher- und Leistungskapazitäten der erneuerbaren Energien in Mittelfranken (Präsentation) N2 - Das Projekt wird im Rahmen des Seminars „Projekt Energietechnik“ des sechsten Semesters Maschinenbau an der Technischen Hochschule Nürnberg durchgeführt. Die Projektarbeit untersucht die Möglichkeiten einer autarken regenerativen Energieversorgung in einer mittelfränkischen Region. Hierbei wird einerseits das Energieerzeugungspotential der Energieträger Wind, Sonne, Biomasse und Laufwasser und andererseits der Verbrauch des Untersuchungsgebiets analysiert. Bei der Gegenüberstellung der Jahreswerte für die Energieerzeugung und des Energieverbrauchs von 1980 bis 2019 fällt der volatile Verlauf der Zeitreihen auf. Um die Überschüsse in der Erzeugung besser ausnutzen zu können und gleichzeitig die Defizite decken zu können, werden mehrere Speichertechnologien verglichen. Mit Hilfe eines Excel-Tools von Herrn Prof. Dr. Popp werden Daten der letzten 40 Jahre analysiert und verrechnet. Dabei werden die Jahre mit extremen Energiedefiziten herausgefunden, in denen die größten Speicherleerungen stattfinden. Daraus kann man schließen, dass die Untersuchungsregion Speicher-technologien für die Deckung der Energiedefizite vorhalten muss, um die benötigte Energiemenge für den Verbrauch bereitzustellen. Des Weiteren wird mit Hilfe des Programms ein optimaler Mix der Erneuerbaren Energieträger berechnet. Zudem lassen sich für deren Ausbau kostenminimale Lösungen errechnen. Im Folgenden lassen sich konkrete Werte für den zahlenmäßigen Ausbau der Anlagen geben. Außerdem behandelt diese Projektarbeit die Speichertechnologie Power-to-Gas-toPower ausführlicher. Es sollen das Prinzip, die Funktions-weise, die Verfahren und die Kosten dargestellt werden. Die Behandlung der Vor- und Nachteile und die Entwicklung in der Zukunft werden abschließend betrachtet. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 3,1 KW - Power-to-X Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6643 ER - TY - CHAP A1 - Reitz, Philipp T1 - Potential-, Speicher- und Verbrauchsanalyse einer regenerativen Energieversorgung mit dem Fokus auf Batteriespeichersysteme (Abschlussbericht) BT - Untersuchung der Wetterdaten mit Hilfe der MERRA Datenbank der vergangenen 40 Jahre, sowie einer möglichen Verwendung von Windkraft-, Photovoltaik- und Speicheranlagen zur regenerativen Energieversorgung des Untersuchungsgebietes Oberfranken/Unterfranken N2 - Untersuchung der Wetterdaten mit Hilfe der MERRA Datenbank der vergangenen 40 Jahre, sowie einer möglichen Verwendung von Windkraft-, Photovoltaik- und Speicheranlagen zur regenerativen Energieversorgung des Untersuchungsgebietes Oberfranken/Unterfranken T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 4,4 KW - Erneuerbare Energie KW - Energieversorgung Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6626 ER - TY - CHAP A1 - Eisenberger, Julian T1 - Projektarbeit Vollständig regenerative Elektrizitätsversorgung im Süden Mittelfrankens BT - Energiewetteranalyse N2 - Die NASA stellt mit ihrer Reanalyse-Datenbank MERRA-2 weltweit aufgezeichnete Klimadaten wie Sonneneinstrahlung, Windgeschwindigkeiten etc. zur Verfügung. Die Daten sind jeweils einem Rastergebiet zugeordnet, welche durch ein weltumspannendes Raster mit einer Auflösung von ca. 0,5° x 0,625° Breitengrad x Längengrad ent-steht. Es liegen aktuell Messdaten aus den Jahren 1980 bis 2019 vor (NASA, 2017, S. 1-3). In dieser Ausarbeitung werden diese Rohdaten aufbereitet, analysiert und hinsichtlich ihrer Aussagekraft für eine zukünftige Nutzung der vorhandenen regenerativen Energieformen zur Umwandlung in Nutzenergie interpretiert. Es wird erörtert, welche regenerativen Energieträger vor allem auch in Verbindung mit Speichertechnologien zur rein regenerativen Deckung des Energiebedarfs geeignet sind. Im Vergleich mit dem aktuellen Bestand an regenerativen Energieanlagen und unter der Annahme von gleichbleibender Einspeiseleistung aus Biomasse- und Laufwasseranlagen wird eine Empfehlung für einen optimalen Energiemix gegeben. Die Analyse bezieht sich auf ein Teilgebiet im Süden der Europäischen Metropolregion Nürnberg. Ein weiterer Bestandteil der Arbeit ist die Recherche zum aktuellen Technologiestand und den Kosten von geotechnischen Speichersystemen. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 4,8 KW - Potentialanalyse KW - Europäische Metropolregion Nürnberg KW - Energiewetter KW - MERRA KW - geotechnische Speicher KW - Wetterdaten KW - Erneuerbare Energie KW - Energiespeicher Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6614 SP - I EP - 29 ER - TY - RPRT A1 - Langenbach, Christian T1 - E-Learning an Hochschulen BT - kritische Bestandsaufnahme, Entwicklungslinien und Perspektiven N2 - Zwei Jahrzehnte E-Learning haben die Hochschulen der viel zitierten und oft beschworenen "Bildungsrevolution" nicht entscheidend nahegebracht. Der Arbeitsbericht bietet vor dem Hintergrund dieser Erkenntnis zunächst einen historischen Abriss der Entwicklung des Themas sowie eine ordnende Bestandsaufnahme heute etablierter, wenn auch nach wie vor nicht in der Fläche verfügbarer Konzepte und Realisierungsansätze. Sodann werden die Potenziale des E-Learnings im Kontext der Hochschullehre beleuchtet, wobei neben bekannten Formaten insbesondere denkbare Entwicklungslinien diskutiert werden, in denen innovative Bausteine vordergründig lernfremder Handlungsfelder der Digitalisierung das E-Learning befruchten und zukunftsorientierte Szenarien prägen könnten. Abschließend setzt sich der Bericht mit den zentralen Problemen auseinander, die einen nachhaltigen Durchbruch des Themas E-Learning an Hochschulen bis dato verhindert haben und nach wie vor hemmen. Zusammenfassung und Ausblick erfolgen in Form von zwölf Thesen. T3 - Arbeitsberichte der Fächergruppe Organisation und Wirtschaftsinformatik / Fakultät Betriebswirtschaft - 1,1 KW - e-learning KW - integriertes Lernen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6600 VL - 2017 IS - 1 ET - korrigierte Ausg. ER - TY - JOUR A1 - Banholzer, Volker Markus T1 - Künstliche Intelligenz als Treiber der Veränderung in der Unternehmenskommunikation 4.0? BT - KI-Anwendungen als Lösung für Probleme der Kontingenz und Komplexität N2 - Künstliche Intelligenz (KI) wird oft als Basisinnovation diskutiert, die Wirtschaft und Gesellschaft radikal verändern wird. Konsequenterweise werden sich auch Berufsbilder und Tätigkeits-beschreibungen transformieren, was auch auf Unternehmenskommunikation zutreffen wird. Allerdings: Technologieentwicklung und Digitalisierung haben seit Jahren auch vor der Einführung von KI die Aufgaben von Unternehmenskommunikation verändert. Kommunikation wird mobiler und kurzzyklischer (Staab 2019), was sowohl mit der fragmentalen Differenzierung und Netzwerkstrukturen (Passoth/Rammert 2016) als auch mit intensiviertem Wettbewerb durch die Globalisierung zu tun hat (Eckert 2016). Aus Sicht der Informationsökonomie (Stiglitz 2017) verschärft dies die strukturelle, asymmetrische Informationsverteilung unter Markakteuren. Information wird zu einem un‐knappen Gut (vgl. Staab 2019), Marken werden zu Sendern und auch Rezipienten verändern ihre Rezeptionsgewohnheiten. Diese Entwicklungen stellen die interne und externe Unternehmens-kommunikation vor neue Aufgaben und Herausforderungen. Vor diesem Hintergrund erscheint KI als Werkzeug zur Lösung dieses Problems. Es fehlt derzeit ein Bewusstsein, welche Herausforderung die digitale Transformation für die Unternehmens-kommunikation darstellt und konsequenterweise fehlen auch die Vorstellungen davon, wie KI helfen kann, diese zu bewältigen, was auch die explorativen Erhebung „KI in der Unternehmenskommunikation“ der Technischen Hochschule Nürnberg illustriert. Der Beitrag verfolgt das Ziel, die Veränderung im Unternehmensumfeld aufzuzeigen, daraus Anforderungen an Unternehmens-kommunikation abzuleiten und Einsatzmöglichkeiten von KI‐Lösungen zu bewerten. Dazu werden Ansätze aus (Technik‐)Soziologie, Informationsökonomie und Betriebswirtschaft sowie Kommunikationswissenschaft genutzt. T3 - IKOM Working paper - 2020,1 KW - Unternehmenskommunikation KW - Unternehmen KW - Kommunikation KW - Künstliche Intelligenz Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6582 SN - 2701‐1712 PB - Technische Hochschule Nürnberg Georg Simon Ohm CY - Nürnberg ER - TY - CHAP A1 - Fischer, Lorenz T1 - Energietechnische Potentialanalyse der Region Rothenburg ob der Tauber (Abschlussbericht) BT - Analyse des Potenzials zur Gewinnung elektrischer Energie aus regenerativen Quellen in der Region Rothenburg ob der Tauber mit Fokussierung auf Wasserkraft in kleinen Fließgewässern N2 - Um den Stromverbrauch in der Region Rothenburg ob der Tauber zu einhundert Prozent möglichst kostengünstig aus regenerativen Energiequellen decken zu können, müsste ein Versorgungssystem mit geotechnischen Speichersystemen wie zum Beispiel Pumpspeicher-kraftwerken aufgebaut werden. Bezogen auf den Durchschnittsverbrauch des Jahres 2018 (≜100%) müsste dabei folgender Energiemix erreicht werden: 50,8 % Windkraft und 68,8 % Photovoltaik, 5,5 % Biomasse und 0,9 % Laufwasser. Unter der Annahme, dass Wasserkraftanlagen und Biomasseanlagen nicht weiter ausgebaut werden, müssten bei dem kostengünstigsten Versorgungssystem 91 Windkraftanlagen (Nennleistung 3,2 MW), sowie 6,2 km² Photovoltaikanlagen errichtet werden. Die betrachtete Beispielanlage erreicht eine Nennleistung 9 kW, diese jedoch nur in den ersten Monaten des Jahres. Von Juni bis Dezember hingegen ist nahezu keine Leistung abrufbar. Bei 60 prozentiger Eigennutzung des erzeugten Stroms und Einspeisung der Überschüsse ist eine Amortisationszeit von 17 bis 18 Jahren zu erreichen. Bei vollständiger Einspeisung sind Amortisationszeiten von über 50 Jahren gegeben, wodurch diese Art der Nutzung ökonomisch nicht vertretbar ist. T3 - Energiekonferenz in Nürnberg am 13.12.2019 : Analysen zur elektrischen regenerativen Selbstversorgung der Europäischen Metropolregion Nürnberg - 4,2 KW - Energieversorgung KW - Kleinwasserkraftwerk KW - Rothenburg ob der Tauber Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6520 CY - Nürnberg ER - TY - GEN A1 - Fischer, Lorenz T1 - Potenzialanalyse Rothenburg – dezentrale Kleinwasserkraftanlagen (Präsentation) BT - Energiekonferenz N-Ergie Auditorium, Nürnberg, am 13.12.2019 N2 - Um den Stromverbrauch in der Region Rothenburg ob der Tauber zu einhundert Prozent möglichst kostengünstig aus regenerativen Energiequellen decken zu können, müsste ein Versorgungssystem mit geotechnischen Speichersystemen wie zum Beispiel Pumpspeicher-kraftwerken aufgebaut werden. Bezogen auf den Durchschnittsverbrauch des Jahres 2018 (≜100%) müsste dabei folgender Energiemix erreicht werden: 50,8 % Windkraft und 68,8 % Photovoltaik, 5,5 % Biomasse und 0,9 % Laufwasser. Unter der Annahme, dass Wasserkraftanlagen und Biomasseanlagen nicht weiter ausgebaut werden, müssten bei dem kostengünstigsten Versorgungssystem 91 Windkraftanlagen (Nennleistung 3,2 MW), sowie 6,2 km² Photovoltaikanlagen errichtet werden. Die betrachtete Beispielanlage erreicht eine Nennleistung 9 kW, diese jedoch nur in den ersten Monaten des Jahres. Von Juni bis Dezember hingegen ist nahezu keine Leistung abrufbar. Bei 60 prozentiger Eigennutzung des erzeugten Stroms und Einspeisung der Überschüsse ist eine Amortisationszeit von 17 bis 18 Jahren zu erreichen. Bei vollständiger Einspeisung sind Amortisationszeiten von über 50 Jahren gegeben, wodurch diese Art der Nutzung ökonomisch nicht vertretbar ist. T3 - Energiekonferenz in Nürnberg am 13.12.2019 : Analysen zur elektrischen regenerativen Selbstversorgung der Europäischen Metropolregion Nürnberg - 3,2 KW - dezentrale Energieversorgung KW - Kleinwasserkraftwerk KW - Rothenburg ob der Tauber Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6534 CY - Nürnberg ER - TY - GEN A1 - Bergner, Kai T1 - Laufwasser Modernisierung (Präsentation) BT - Merra-2 Sektor C2 ; Energiekonferenz 13.12.2019 N2 - Basierend auf den erneuerbaren Energien Solarenergie, Windenergie, Biomasse und Laufwasser wird eine zukünftige Stromversorgung der Europäischen Metropolregion Nürnberg modelliert. Mit drei gängigen Speicheransätzen wird eine möglichst ökonomische Prognose gestellt. Schwerpunkt der Betrachtung sind Laufwasserkraftwerke und deren Modernisierungs- und Ausbaupotenzial. Nach Analyse des Ist-Zustandes werden mögliche technische Modernisierungen genannt und auf deren Stromentstehungskosten eingegangen. Das Ausbaupotenzial wird anhand einer Jahresdauerlinie erläutert. T3 - Energiekonferenz in Nürnberg am 13.12.2019 : Analysen zur elektrischen regenerativen Selbstversorgung der Europäischen Metropolregion Nürnberg - 3,1 KW - Elektrizitätsversorgung KW - Laufwasserkraftwerk KW - Metropolregion Nürnberg Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6510 CY - Nürnberg ER - TY - CHAP A1 - Bergner, Kai T1 - Potenzialanalyse eines Merra2-Sektors mit Schwerpunkt Laufwasserkraftwerke (Projektarbeit) BT - Projektarbeit N2 - Basierend auf den erneuerbaren Energien Solarenergie, Windenergie, Biomasse und Laufwasser wird eine zukünftige Stromversorgung der Europäischen Metropolregion Nürnberg modelliert. Mit drei gängigen Speicheransätzen wird eine möglichst ökonomische Prognose gestellt. Schwerpunkt der Betrachtung sind Laufwasserkraftwerke und deren Modernisierungs- und Ausbaupotenzial. Nach Analyse des Ist-Zustandes werden mögliche technische Modernisierungen genannt und auf deren Stromentstehungskosten eingegangen. Das Ausbaupotenzial wird anhand einer Jahresdauerlinie erläutert. T3 - Energiekonferenz in Nürnberg am 13.12.2019 : Analysen zur elektrischen regenerativen Selbstversorgung der Europäischen Metropolregion Nürnberg - 4,1 KW - Elektrizitätsversorgung KW - Laufwasserkraftwerk KW - Metropolregion Nürnberg Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6502 CY - Nürnberg ER - TY - GEN A1 - Reitz, Philipp T1 - Versorgungsanalyse zur Metropolregion Nürnberg mit dem Schwerpunkt Batteriespeichersysteme (Präsentation) BT - Rastergebiet: 10,625E 50,00N N2 - Untersuchung des Einsatzpotentials erneuerbarer Energieträger für die Vollversorgung des Großraums Nürnberg durch Analyse des Energiewetters und Auslegung eines Versorgungskonzepts mit vertiefter Untersuchung von Batteriespeichern T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 3,4 KW - Erneuerbare Energien KW - Energiespeicher Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6470 ER - TY - GEN A1 - Müller, Nina T1 - Analysegebiet: 10,625°E – 49,5°N ; Vertiefungsthema: Laufwasser (Präsentation) N2 - Vorstellung der Engieprojektergebnisse T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 3,5 KW - regenerative Energien KW - Laufwasserkraftwerk KW - Europäische Metropolregion Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6487 VL - 2020 ER - TY - CHAP A1 - Dunkes, Ferdinand T1 - Analyse des Potentials zur regenerativen Stromversorgung des Großraums Nürnberg (Abschlussbericht) BT - Untersuchung des Einsatzpotentials erneuerbarer Energieträger für die Versorgung des Großraums Nürnberg durch Analyse des Energiewetters und Auslegung eines Versorgungskonzepts mit vertiefter Untersuchung von Windkraftanlagen N2 - Ziel der vorliegenden Studienarbeit ist das Generieren belastbarer, reproduzierbarer Datensätze und Ergebnisse, um in einem weiteren Schritt ein zukunftsfähiges regeneratives Versorgungskonzept für ein im Voraus festgelegtes Gebiet auslegen zu können. Hierfür wird zunächst das Energiewetter der zu untersuchenden Region analysiert. Unter Berücksichtigung aktueller Verbrauchszahlen kann dann bewertet werden, inwiefern weiterhin Potential für den Ausbau der Nutzung regenerativer Energieträger besteht. Außerdem sollen verschiedene Speichersysteme in die Untersuchung einbezogen werden, sodass eine abweichungsfreie Deckung des Bedarfs, unabhängig von Wettereinflüssen, gewährleistet werden kann. Die Analyse des Energiewetters bezieht sich auf globale Solarstrahlung und Wind. Dabei wird im Speziellen auf den aktuellen Stand der Technik sowie auf die Kosten der Windenergie eingegangen. Ferner werden Potentiale bei Laufwasser sowie gegebenenfalls Biomasse herausgearbeitet. Der Mittelpunkt des zu untersuchenden Rastergebiets liegt bei 11.25°E, 49.50°N und umfasst den Bereich innerhalb der Städte Forchheim im Norden, Schwabach im Süden und Hersbruck im Osten, beziehungsweise Zirndorf im Westen, mit deren Umland. Dieser Bereich wird gemeinhin als Großraum Nürnberg bezeichnet. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 4,6 KW - Elektrizitätsversorgung KW - regenerative Energien KW - Windkraftanlage KW - Metropolregion Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6491 N1 - Stand: 06.07.2020, Version 1 ER - TY - GEN A1 - Dunkes, Ferdinand T1 - Online-Energiekonferenz am 30. Juni 2020 (Präsentation) BT - [Ausbaupotential der regenerativen Stromversorgung im Großraum Nürnberg] N2 - Untersuchung des Einsatzpotentials erneuerbarer Energieträger für die Vollversorgung des Großraums Nürnberg durch Analyse des Energiewetters und Auslegung eines Versorgungskonzepts mit vertiefter Untersuchung von Windkraftanlagen T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 3,6 KW - Energieversorgung KW - Erneuerbare Energien KW - Windkraftanlage KW - Metropolregion Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6432 ER - TY - GEN A1 - Eisenberger, Julian T1 - Vollständig regenerative Elektrizitätsversorgung im Süden Mittelfrankens (Präsentation) BT - Schwerpunkt Geotechnische Speicher N2 - Die NASA (National Aeronautics and Space Administration) stellt mit ihrer Reanalyse-Datenbank MERRA-2 (Modern-Era Retrospective analysis for Research and Applica-tions, Version 2) weltweit aufgezeichnete Klimadaten wie Sonneneinstrahlung, Windgeschwindigkeiten etc. zur Verfügung. Die Daten sind jeweils einem Rastergebiet zugeordnet, welche durch ein weltumspannendes Raster mit einer Auflösung von ca. 0,5° x 0,625° Breitengrad x Längengrad entsteht. Es liegen aktuell Messdaten aus den Jahren 1980 bis 2019 vor (NASA, 2017, S. 1-3). In dieser Ausarbeitung sollen diese Rohdaten aufbereitet, analysiert und hinsichtlich ihrer Aussagekraft für eine zukünftige Nutzung der vorhandenen regenerativen Energieformen zur Umwandlung in Nutzenergie interpretiert werden. Es soll erörtert werden, welche regenerativen Energieträger vor allem auch in Verbindung mit Speichertechnologien zur rein regenerativen Deckung des Energiebedarfs geeignet sind. Das zu analysierende Gebiet umfasst im Wesentlichen Teile der bayerischen Landkreise Roth, Weißenburg-Gunzenhausen und Eichstätt, der Gebietsmittelpunkt in ge-ographischen Koordinaten ist 11.25°E 49.00°N. Ein weiterer Bestandteil der Arbeit ist die Recherche zum aktuellen Technologiestand und den Kosten von geotechnischen Speichersystemen. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 3,8 KW - Potentialanalyse KW - Europäische Metropolregion Nürnberg KW - Energiewetter KW - MERRA KW - geotechnische Speicher KW - regenerative Energien KW - Energiespeicher Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6462 ER - TY - GEN A1 - Eisenberger, Julian T1 - Kommt Mittelfranken bald komplett ohne fossile Brennstoffe aus? (Kurzbericht) N2 - Der südliche Teil der Metropolregion Nürnberg verfügt bereits heute über einen beträchtlichen Bestand an regenerativen Energieanlagen und könnte durch weiteren Ausbau vermutlich noch viel mehr des vorhandenen Potentials ausnutzen. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 2,8 KW - Potentialanalyse KW - Europäische Metropolregion Nürnberg KW - Energiewetter KW - MERRA KW - geotechnische Speicher KW - regenerative Energien KW - Energiespeicher KW - Europäische Metropolregion Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6444 ER - TY - CHAP A1 - Will, Katharina T1 - Aufbereitung realer Verbrauchsdaten zur Modellierung einer regenerativen elektrischen Vollversorgung in der Metropolregion Nürnberg N2 - In dieser Bachelorarbeit sollen die Stromverbräuche der regionalen Teilgebiete der Europäischen Metropolregion Nürnberg ermittelt werden. Diese lässt sich auf 17 Planquadrate gemäß der NASA Datenbank MERRA-2 aufteilen. Für jedes Gebiet soll eine Stromverbrauchszeitreihe aus den von den Verteilnetzbetreibern veröffentlichten tatsächlichen Verbräuchen modelliert werden. Aufgrund der Unvollständigkeit und Uneinheitlichkeit der veröffentlichten Daten erfordert dies eine aufwendige Aufbereitung der Daten und das Ermitteln realitätsnaher Approximationen bei unvollständigen Datensätzen. Diese Arbeit soll die Grundlage für später durchzuführende Versorgungsanalysen für die einzelnen Teilregionen bilden sowie für die Bestimmung der dazu nötigen Speicherkapazitäten. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 4,9 KW - stromverbrauch KW - verbrauchszeitreihe KW - Metropolregion Nürnberg KW - regenerative Stromversorgung KW - EMN KW - Elektrizitätsverbrauch KW - Verbrauch / Zeitreihe KW - regenerative Energien KW - Europäische Metropolregion Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6424 N1 - Zugl.: Technische Hochschule Nürnberg, Bachelorarbeit, 2020 SP - I EP - 65 ER - TY - GEN A1 - Reitz, Philipp T1 - Batteriespeicher – das Energiespeicherkonzept für die Energiewende (Kurzbericht) BT - Riesiges Potential für stationäre Energiespeicherung durch steigende Nachfrage an Lithium-Ionen-Batterien in der Elektromobilität N2 - Nürnberg (Deutschland) – die rein regenerative Energieversorgung verlangt nach Speichersystemen, die deren volatilen Anteil langfristig vollumfänglich ausgleichen können. Als Basis hierfür könnten Lithium-Ionen-Batterien dienen, deren Entwicklung gerade besonders durch die erhöhte Nachfrage nach Elektromobilität schlagartig vorangetrieben wird. Reichweite, Schnellladefähigkeit und vor allem Kosten werden künftig hohe Anforderungen an Hochenergie-Batteriesysteme stellen. Wie sich der Wirkungsgrad und das Selbstentladungsverhalten auf die erforderlichen Energieumwandlungsparks zur systemverantwortlichen regenerativen Erfüllung einer Versorgungsaufgabe auswirkt, haben Studierende im Rahmen ihrer Projektarbeit herausgefunden. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 2,4 KW - Batteriespeicher KW - Energiewende KW - Energiewende KW - Energiespeicher Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6374 ER - TY - GEN A1 - Müller, Nina T1 - Regeneratives Nürnberg als Vorbild für die globale Energiewende (Kurzbericht) BT - Energieversorgung eines Teilgebiets Nürnberg ohne konventionelle Energien möglich N2 - Ziel des Gesamtprojektes ist es, die Europäische Metropolregion Nürnberg (EMN) komplett durch regenerative Energien versorgen zu können. Die EMN wird dazu in verschiedene Teilgebiete unterteilt. Dieses Projekt befasst sich mit dem Gebiet um Ansbach. Hierzu werden unterschiedliche Themen, wie Solarthermie, Windkraft, Biomasse, Laufwasser oder aber auch verschiedenste Speichertechnologien betrachtet. Die Werte werden aus einer Vielzahl von einfließenden Daten und Beobachtungen über Berechnungsmodelle auf das globale Gitternetzt umgerechnet. Durch die NASA stehen diese Werte von 1980 bis 2019 in der Datenbank Merra-2 zur Verfügung. [1] Aus diesen 40 Jahren wird schließlich das ungünstigste Wetterjahr ausgewertet. Dieses Jahr soll dann als Maßstab zur Auslegung der regenerativen Energieumwandlungsanlagen genutzt werden, um somit die grüne Energieversorgung in dem Teilgebiet auch in schlechten Wetterphasen zu gewährleisten. Als Schwerpunkt des Projekts geht es jedoch vor allem um die Wasserkraft in der gesamten EMN. Dabei bezieht man sich auf den aktuellen technischen Stand der Wasserkraftanlagen, wie auch auf deren Kostenfaktoren. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 2,5 KW - regenerative Energien KW - Laufwasserkraftwerk KW - Europäische Metropolregion Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6353 ER - TY - GEN A1 - Langguth, Christoph T1 - Erneuerbarer Strom für Oberfranken (Kurzbericht) N2 - Im Rahmen dieses Projekts wird der europäische Metropolraum Nürnberg, im Hinblick auf eine ausschließliche regenerative Energieversorgung, untersucht. Grundsätzlich soll analysiert werden, wie viele erneuerbare Energieanlagen in welchem Energiemix noch zugebaut werden müssen, damit eine erfolgreiche Energiewende vollzogen werden kann. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 2,7 KW - Energieversorgung KW - Elektrizitätsbedarf KW - regenerative Energien Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6344 ER - TY - GEN A1 - Langguth, Christoph T1 - Potential- und Speicheranalyse im Bereich regenerative Energien in Oberfranken (Projektskizze) N2 - Im Rahmen dieses Projekts wird der europäische Metropolraum Nürnberg, im Hinblick auf eine ausschließliche regenerative Energieversorgung, untersucht. Grundsätzlich soll analysiert werden, wie viele erneuerbare Energieanlagen in welchem Energiemix noch zugebaut werden müssen, damit eine erfolgreiche Energiewende vollzogen werden kann. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 1,7 KW - Energieversorgung KW - regenerative Energien KW - Europäische Metropolregion Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6330 ER - TY - GEN A1 - Dunkes, Ferdinand T1 - Nürnberg Goes Green - Versorgung aus 100% Ökostrom möglich? (Kurzbericht) BT - Kann der Großraum Nürnberg vollständig durch regenerative Energieträger versorgt werden? Welche Bedingungen müssen dafür erfüllt werden? N2 - Kurzbericht zum energietechnischen Projekt der Technischen Hochschule Nürnberg im Sommersemester 2020. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 2,6 KW - Energieversorgung KW - regenerative Energien KW - Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6404 ER - TY - GEN A1 - Dunkes, Ferdinand T1 - Analyse des Potentials zur regenerativen Stromversorgung des Großraums Nürnberg (Projektskizze) BT - Untersuchung des Einsatzpotentials erneuerbarer Energieträger für die Versorgung des Großraums Nürnberg durch Analyse des Energiewetters und Auslegung eines Versorgungskonzepts mit vertiefter Untersuchung von Windkraftanlagen N2 - Ziel des energietechnischen Projekts ist das Generieren belastbarer, reproduzierbarer Datensätze und Ergebnisse, um in einem weiteren Schritt ein zukunftsfähiges regeneratives Versorgungskonzept für ein im Voraus festgelegtes Gebiet auslegen zu können. Hierfür wird zunächst das Energiewetter der zu untersuchenden Region analysiert. Unter Berücksichtigung des Verbrauchs kann dann bewertet werden, inwiefern weiterhin Potential für den Ausbau der Nutzung regenerativer Energieträger besteht. Außerdem sollen verschiedene Speichersysteme in die Untersuchung einbezogen werden, sodass eine abweichungsfreie Deckung des Bedarfs, unabhängig von Wettereinflüssen, gewährleistet werden kann. Die Analyse des Energiewetters bezieht sich auf globale Solarstrahlung und Wind. Dabei wird im Speziellen auf den aktuellen Stand der Technik sowie auf die Kosten der Windenergie eingegangen. Ferner werden Potentiale bei Laufwasser sowie gegebenenfalls Biomasse herausgearbeitet. Der Mittelpunkt des zu untersuchenden Rastergebiets liegt bei 11.25°E, 49.50°N und umfasst den Bereich innerhalb der Städte Forchheim im Norden, Schwabach im Süden und Hersbruck im Osten, beziehungsweise Zirndorf im Westen, mit deren Umland. Dieser Bereich wird gemeinhin als Großraum Nürnberg bezeichnet. T3 - Online-Energiekonferenz der Fakultät Maschinenbau, Schwerpunkt Energietechnik am 30.06.2020 - 1,6 KW - Energieversorgung KW - regenerative Energien KW - Nürnberg Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:92-opus4-6393 ER -