Refine
Publication reviewed
- begutachtet (11)
- nicht begutachtet (1)
Keywords
- Batterie (2)
- Akkumulator (1)
- Simulation (1)
Energy storage is a crucial flexibility measure to temporally decouple power generation from power demand and is touted as the missing link in realizing a decarbonized energy system based on renewable energy. Energy storage capacity buildup at all levels of the global energy system is expected to accelerate the decarbonization process. To this end, a coherent mathematical framework to ascertain the carbon footprint of localized energy systems with energy storage is indispensable. This article presents an open-source energy system simulation program — Energy System Network (ESN). A variety of energy system configurations can be simulated with the Python program, which incorporates key energy system components such as generation, grid, storage, and loads. ESN features an integrated bottom-up approach that combines energy system modeling with streamlined life cycle assessment techniques to quantify the carbon footprint of all components in a localized energy system. The lifecycle phases of each component, including production, operation, and end-of-life treatment, can be considered. Carbon footprint values are obtained for two demonstrative case studies with lithium-ion battery applications: energy arbitrage and home energy systems. The metric Levelized Emissions of Energy Supply (LEES) has been used to evaluate the carbon footprint of each application. An unconventional energy arbitrage strategy designed to exploit the grid carbon intensity spreads instead of the energy price spreads manages to achieve a LEES value about 17% lower than the conventional variant. The influence of rooftop solar generation, battery energy storage system, and the energy management strategy on the LEES values for a home energy system is explored. A maximum LEES reduction of over 37% vis-á-vis the base scenario was observed with optimal energy management for the solar generation and the battery system. The open-source availability of ESN can contribute to transparency, comparability, and reproducibility in carbon footprint assessments of localized energy systems with energy storage.
Feature-conserving gradual anonymization of load profiles and the impact on battery storage systems
(2023)
Electric load profiles are highly relevant for battery storage research and industry as they determine system design and operation strategies. However, data obtained from electrical load measurements often cannot be shared or published due to privacy concerns. This paper presents a methodology to gradually anonymize load profiles while conforming to various degrees of anonymity. It segregates the original load profile into base and peak sequences and extracts features from each of the sequences. With the help of the features, a synthetic, anonymized load profile is created. Different levels of anonymization can be selected, which transform the original profile to the desired extent. A random permutation of the peak sequences or base sequences is used to achieve this transformation. Exemplary profiles from a household and an electric vehicle charging station are used to demonstrate the functionality of the anonymization. The indicators of the anonymized load profiles are compared with the original ones in both time and frequency domains, and the effects of load profile anonymization on the operation of battery storage systems in two scenarios are analyzed. While the anonymized load profiles retain the time-invariant indicators from the original profile, the permutation causes a loss of regularity in the load profiles. As a result, relevant indicators of battery storage systems subjected to these anonymized profiles deviate to a greater extent in time-dependent applications such as self-consumption increase. This is reflected in the overestimation of equivalent full cycles by up to 6% and underestimation of self-sufficiency by up to 9 percentage points. In time-independent applications such as peak shaving, however, the indicators can be well reproduced with deviations of up to 3% despite the lost regularity. In order to make the anonymization methodology usable for everyone, we present the open-source tool LoadPAT, in which users can anonymize their load profiles and choose their desired level of anonymization. This work is intended to further encourage the dissemination of open-source data.
The electrification of the transportation sector leads to an increased deployment of lithium-ion batteries in vehicles. Today, traction batteries are installed, for example, in electric cars, electric buses, and electric boats. These use-cases place different demands on the battery. In this work, simulated data from 60 electric cars and field data from 82 electric buses and six electric boats from Germany are used to quantify a set of stress factors relevant to battery operation and life expectancy depending on the mode of transportation. For this purpose, the open-source tool SimSES designed initially to simulate battery operation in stationary applications is extended toward analyzing mobile applications. It now allows users to simulate electric vehicles while driving and charging. The analyses of the three means of transportation show that electric buses, for example, consume between 1 and 1.5 kWh/km and that consumption is lowest at ambient temperatures around 20 °C. Electric buses are confronted with 0.4–1 equivalent full cycle per day, whereas the analyzed set of car batteries experience less than 0.18 and electric boats between 0.026 and 0.3 equivalent full cycles per day. Other parameters analyzed include mean state-of-charges, mean charging rates, and mean trip cycle depths. Beyond these evaluations, the battery parameters of the transportation means are compared with those of three stationary applications. We reveal that stationary storage systems in home storage and balancing power applications generate similar numbers of equivalent full cycles as electric buses, which indicates that similar batteries could be used in these applications. Furthermore, we simulate the influence of different charging strategies and show their severe impact on battery degradation stress factors in e-transportation. To facilitate widespread and diverse usage, all profile and analysis data relevant to this work is provided as open data as part of this work.
The amount of deployed battery energy storage systems (BESS) has been increasing steadily in recent years. For newly commissioned systems, lithium-ion batteries have emerged as the most frequently used technology due to their decreasing cost, high efficiency, and high cycle life. As a result of a multitude of cell internal aging mechanisms, lithium-ion batteries are subject to degradation. The effects of degradation, in particular decreasing capacity, increasing resistance, and safety implications, can have significant impact on the economics of a BESS. Influenced by aging stress factors such as the state of charge, charge–discharge rate, cycle count, and temperature, the extent of degradation is directly affected by the operating conditions. Significant amount of literature can be found that focuses on aging aware operation of BESSs. In this review, we provide an overview of relevant aging mechanisms as well as degradation modeling approaches, and deduce the key aspects from the state of the art in those topics for BESS operation. Following that, we review and categorize methods that aim to increase BESS lifetime by accounting for battery degradation effects in the operation strategy. The literature shows that using empirical or semi-empirical degradation models as well as the exact solution approach of mixed integer linear programming are particularly common for that purpose, as is the method of defining aging costs for the objective function. Furthermore, through a simulation case study, we identify the most relevant stress factors that influence degradation for the key applications of self consumption increase, peak shaving, and frequency containment reserve.
Battery systems are extensively used in smart energy systems in many different applications, such as Frequency Containment Reserve or Self-Consumption Increase. The behavior of a battery in a particular operation scenario is usually summarized using different key performance indicators (KPIs). Some of these indicators such as efficiency indicate how much of the total electric power supplied to the battery is actually used. Other indicators, such as the number of charging-discharging cycles or the number of charging-discharging swaps, are of relevance for deriving the aging and degradation of a battery system. Obtaining these indicators is very time-demanding: either a set of lab experiments is run, or the battery system is simulated using a battery simulation model. This work instead proposes a machine learning (ML) estimation of battery performance indicators derived from time series input data. For this purpose, a random forest regressor has been trained using the real data of electricity grid frequency evolution, household power demand, and photovoltaic power generation. The results obtained in the research show that the required KPIs can be estimated rapidly with an average relative error of less than 10%. The article demonstrates that the machine learning approach is a suitable alternative to obtain a very fast rough approximation of the expected behavior of a battery system and can be scaled and adapted well for estimation queries of entire fleets of battery systems
Both global climate change and the decreasing cost of lithium-ion batteries are enablers of electric vehicles as an alternative form of transportation in the private sector. However, a high electric vehicle penetration in urban distribution grids leads to challenges, such as line over loading for the grid operator. In such a case installation of grid integrated storage systems represent an alternative to conventional grid reinforcement. This paper proposes a method of coordinated control for multiple battery energy storage systems located at electrical vehicle charging parks in a distribution grid using linear optimization in conjunction with time series modeling. The objective is to reduce the peak power at the point of common coupling in existing distribution grids with a high share of electric vehicles. An open source simulation tool has been developed that aims to couple a stand alone power flow model with a model of a stand alone battery energy storage system. This combination of previously disjointed tools enables more realistic simulation of the effects of storage systems in different operating modes on the distribution grid. Further information is derived from a detailed analysis of the storage system based on six key characteristics. The case study involves three charging parks with various sizes of coupled storage systems in a test grid in order to apply the developed method. By operating these storage systems using the coordinated control strategy, the maximum peak load can be reduced by 44.9%. The rise in peak load reduction increases linearly with small storage capacities, whereas saturation behavior can be observed above 800 kWh.
Stationäre Batteriespeicher gewinnen sowohl im privaten als auch im gewerblichen Bereich weiterhin an Relevanz:
Fortschritte in Zell- und Systemtechnologie erlauben innovative und kostengünstigere Lösungen, neue Geschäftsfelder werden erschlossen und rechtliche Rahmenbedingungen sind im stetigen Wandel. Dieser Artikel fasst die wichtigsten Entwicklungen und Branchen-Trends für 2021 in Deutschland zusammen und untermauert diese anhand von Umfragen des Experten-Fachforums „BVES Fachforum Batteriespeicher“. Zusätzlich zu einer Markt- und Kostenprognose erlaubt die Auswertung einen Blick auf mögliche neue Anwendungsfelder sowie eine Branchenempfehlung zu Handlungsfeldern in den Bereichen Recht und Regulatorik.
The imminent coupling of the transport sector with the electricity sector and the possibilities of grid integrated energy storages are creating new potentials and challenges.
With open_BEA (open battery models for electrical grid applications), the following open questions are addressed:
• Which storage technology is costoptimal for a given application?
• How must stationary storage systems optimally positioned, dimensioned and operated in order to provide gridrelated services?
• To which extend are battery electric vehicles capable to serve as a flexibility option in a future power grid?
• Which potential has an energy storage system performing active peak-shaving for future grid planning?
Lithium-ion batteries are used for both stationary and mobile applications. While in the automotive industry standard profiles are used to compare the performance and efficiency of competing vehicles, a similar comparative metric has not been proposed for stationary battery energy storage systems. Because standard profiles are missing, the comparable evaluation of different applications with respect to efficiency, long-term behavior and profitability is very difficult or not possible at all. This work presents a method to create these standard profiles and the results are available as open data for download. Input profiles including frequency data, industry load profiles and household load profiles are transformed into storage profiles including storage power and state of charge using a holistic simulation framework. Various degrees of freedom for the energy management system as well as for the storage design are implemented and the results are post-processed with a profile analyzer tool in order to identify six key characteristics, these being: full-equivalent cycles, efficiency, depth of cycles, resting periods, number of changes of sign and energy throughput between changes of sign. All applications examined in this paper show unique characteristics which are essential for the design of the storage system. E.g., the numbers for annual full-equivalent cycles vary from 19 to 282 and the efficiency lies between 83% and 93%. With aid of this work in conjunction with the open data results, users can test and compare their own cell types, operation strategies and system topologies with those of the paper. Furthermore, the storage power profiles and state of charge data can be used as a reference for lifetime and profitability studies for stationary storage systems.
SimSES: A holistic simulation framework for modeling and analyzing stationary energy storage systems
(2022)
The increasing feed-in of intermittent renewable energy sources into the electricity grids worldwide is currently leading to technical challenges. Stationary energy storage systems provide a cost-effective and efficient solution in order to facilitate the growing penetration of renewable energy sources. Major technical and economical challenges for energy storage systems are related to lifetime, efficiency, and monetary returns. Holistic simulation tools are needed in order to address these challenges before investing in energy storage systems. One of these tools is SimSES, a holistic simulation framework specialized in evaluating energy storage technologies technically and economically. With a modular approach, SimSES covers various topologies, system components, and storage technologies embedded in an energy storage application. This contribution shows the capabilities and benefits of SimSES by providing in-depth knowledge of the implementations and models. Selected functionalities are demonstrated, with two use cases showing the easy-to-use simulation framework while providing detailed technical analysis for expert users. Hybrid energy storage systems consisting of lithium-ion and redox-flow batteries are investigated in a peak shaving application, while various system topologies are analyzed in a frequency containment reserve application. The results for the peak shaving case study show a benefit in favor of the hybrid system in terms of overall cost and degradation behavior in applications that have a comparatively low energy throughput during lifetime. In terms of system topology, a cascaded converter approach shows significant improvements in efficiency for the frequency containment reserve application.
Driven by the need for a sustainable energy transition and a paradigm shift in the energy and mobility sectors, the popularity of electric vehicles is on the rise. Learning curve effects and falling investment costs further accelerate the deployment of electric vehicles with lithium-ion batteries; and as a multi-purpose technology, they are predestined for serving multiple applications. In this work we present an electric vehicle multi-use approach for a German commercial electricity consumer with an electric vehicle fleet. We analyze which behind-the-meter and in front-of-the-meter applications are particularly suitable for electric vehicles from a techno-economic point of view. In addition to providing the mobility service, we investigate the applications self-consumption increase, peak shaving, frequency regulation, and spot market trading. For the implementation of the approach, we introduce a model predictive control framework in which a mixed-integer linear programming algorithm is combined with a semi-empirical degradation model. The approach is analyzed with the investigation of fleet sizes from 1 to 150 vehicles, different application combinations, possible energy shift between the energy partitions, bidirectional charging schemes, and degradation awareness formulations. The results show that the deployment flexibility and application synergies increase with the number of stacked services, leading to additional annual cash flows of up to 2224 EUR per electric vehicle as well as battery lifetime improvements.
The market ramp-up of electromobility is shifting vehicle-to-grid (V2G) issues into the focus of research and industry. Electric vehicles (EVs) have the potential to support the trend towards renewable energies in their role as storage units during idle times. To participate in balancing power and energy markets, EVs are pooled via aggregators. Instead of a random composition, aggregators can smartly compose their pools and add only those vehicles that actually contribute to the pool’s performance, gaining advantages over competitors. The optimization methods presented in this paper form optimized pool combinations based on the power and energy capability profiles of commercial EVs. Genetic algorithms are used to determine the revenues of the possible pools per participating EV. The use cases analyzed are the provision of balancing power on the frequency containment reserve (FCR) market of Central Europe and energy arbitrage trading on the European power exchange intraday continuous and day-ahead auction spot markets. The results show that through smart pool composition, an aggregator can increase revenue per vehicle by up to seven-fold across the markets compared to randomly assembled pools. In the Central European market, for example, the potential V2G revenues on the FCR market (380 €) exceeded those of arbitrage trading (28 € − 203 €) in 2020. In a simulation, we show the increased degradation of the vehicle battery in V2G operation compared to sole use for mobility with a smart charging strategy. However, the additional revenue can make V2G financially worthwhile, depending on costs for measuring equipment, bidirectional charging stations, and aggregator costs.