Bronze - frei zugänglich aber ohne Lizenzhinweis, d.h. keine Weitergabe
Refine
Year of publication
Document Type
- Announcement (104)
- Article (14)
- Conference Proceeding (12)
- Article trade magazine (5)
- Workingpaper / Report (4)
- Part of a Book (3)
- Diploma Thesis (3)
- Master's Thesis (2)
- Book (1)
- Doctoral Thesis (1)
Keywords
- Amtliche Mitteilungen (101)
- Prüfungsrecht (77)
- Prüfungsordnung (66)
- Bachelor (41)
- Master (41)
- MV (30)
- Maschinenbau (29)
- Änderung (29)
- Satzung (21)
- Verfahrenstechnik (20)
Department/institution
- Fachbereich - Maschinenbau und Verfahrenstechnik (149) (remove)
Ziel der Master-Thesis von S. Belenkiy zum Thema "Entwicklung von Software für die Simulation im Bereich Unternehmungsmanagement", ist die Entwicklung eines Tools, das sowohl für das Training von Führungskräften, als auch zum Einsatz in der Hochschulausbildung geeignet ist. Das vorgestellte Planspiel ist internetfähig. Das bietet folgende Potentiale: 1. Höhere Flexibilität: insbesondere hinsichtlich der Zeit- und Ortsgebundenheit des Lernens; 2. Individualisierung des Lernens: mehr Möglichkeiten für den einzelnen Lernenden, den Lernprozess (Lerntempo, Lerninhalte etc.) individuell auf seine Bedürfnisse abzustimmen. 3. Netzwerkbildung: durch Kooperation räumlich verteilter Teilnehmer können soziale, ggf. weltweite Netzwerke entstehen.
Die Diplomarbeit beinhaltet die Finite-Elemente-Simulation eines Systems aus Stoßfängerquerträgers und Crashboxen. Durch eine gezielte Deformation sollen diese Elemente einen Teil der Aufprallenergie aufnehmen. In dieser Berechnung prallt das System mit einer hohen Geschwindigkeit auf eine Barriere auf. Dabei entstehen große Verformungen. Die gesamte Simulation spielt sich innerhalb von wenigen Millisekunden ab.Das Problem ist also gekennzeichnet durch die Lösung eines nichtlinearen dynamischen Problems mit großen Verformungen. Das speziell hierfür geeignete explizite Verfahren wurde hierbei verwendet. Dieses Verfahren zeichnet sich gegenüber dem impliziten durch kürzere Berechnungszeiten am Computer aus, vorausgesetzt die Stabilitätsbeschränkungen werden hierbei nicht verletzt. Eine Einführung in die Thematik der Finiten-Elemente-Methode (FEM)ist am Anfang dieser Diplomarbeit gesetzt. Von den Grundlagen der linear-elastischen FEM-Berechnungen erfolgt hiernach die Ausweitung auf nichtlineare FEM-Berechnungen. Materialeigenschaften wie das plastische Verformen (Fließen) oder die zunehmende Verfestigung mit steigender Beanspruchung werden hierbei aufgegriffen und in das FE-Modell eingearbeitet. Die eigentliche Simulation erfolgte in mehreren Schritten. Das System des Stoßfängerquerträgers wurde hierbei in die Komponenten Crashbox und Stoßfängerquerträger aufgeteilt. Die Auslegung der Crashbox erfolgte also getrennt. Es werden mehrere Varianten der Crashbox simuliert, wobei die Maße sowie die Wandstärke als vorgegeben angesehen werden. Die Varianten unterschieden sich in der Form der Falten an der Crashbox, welche eine gezielte Deformation und somit eine effizientere Aufnahme der Aufprallenergie, steuern sollen. Die Auslegung des Stoßfängerquerträgers erfolgte in ähnlicher Weise. In Hinblick auf Materialeinsparungen und Verstärkungen im Bereich vor der Crashbox werden mehrere Varianten gesondert simuliert. Aus den Ergebnissen der vorangehenden Analysen setzte sich schließlich das Gesamtsystem zusammen. Um die Aussagekraft dieser Analysen zu untersuchen wird am Ende der Aufprall des Gesamtsystems auf eine versetzte und deformierbare Barriere simuliert.
This paper explores the tensions in team creativity. The tensions in team creativity are based on a tension between originality and effectiveness in the standard definition of creativity. To display the tensions in team creativity, the value square (“Wertequadrat”) developed by Schulz von Thun (1998) is used which balances a value with its countervalue. The author identifies tensions for cohesion, consensus and conformity. Cohesion is described as a tension between team diversity and team safety, consensus as a tension between constructive controversy and participatory decision-making and conformity as a tension between support for innovation and task orientation. Finally, the connection of individual and team creativity is described as an interplay between solitary and interactive components.
Veränderte wirtschaftliche Rahmenbedingungen und die zunehmende Bedeutung von radikalen Innovationen und technologischen Diskontinuitäten führen dazu, dass mehr und mehr Unternehmen Scouting-Aktivitäten implementieren. Diese gehen über das klassische Innovationsmanagement hinaus. Im vorliegenden Beitrag werden Auswirkungen dieses Scouting Paradigmas diskutiert und ein Framework zu dessen Umsetzung entwickelt, das sowohl den Blick nach außen als auch nach innen richtet. External Innovation Scouting dient dazu, systematisch Technologien und Geschäftsideen als Innovationschancen für das Unternehmen zu ermitteln. Beim Internal Innovation Scouting geht es darum, die richtigen Rahmenbedingungen dafür zu schaffen, dass Mitarbeiter Innovationschancen aufgreifen und im Unternehmen radikale Innovationen marktreif entwickeln können. Außerdem stellt das Innovation Scouting neue Anforderungen an die Innovationsbewertung. Innovation Scouting ergänzt das bestehende Innovationsmanagement um eine langfristige Perspektive, die für das Überleben jenseits der Quartalsberichte von entscheidender Bedeutung sein kann.
There is a popular saying in German: Innovation is when the market shouts “Hooray!”. Thus, a new idea is only as good as its diffusion into the addressed social system. The question is what affects the adoption or rejection of a new idea. Carsten Deckert shares his experience on the main innovation resistances and on ways to increase the acceptance of new ideas. He talks about which perceived attributes of innovations are conducive to the rate of adoption of an innovation and which are characteristics of failed innovations.
The definition of individual creativity is based on a tension between novelty on the one side and usefulness respectively appropriateness on the other side. The paper explores how this tension pervades the stage and componential theories of creativity. To achieve this, the so called value square (“Wertequadrat”) developed by Helwig (1967) and Schulz von Thun (1998)is used which balances a value with its countervalue to analyze creativity. The author identifies tensions of action and inaction, expertise and mindfulness, precision and ambiguity as well as immersion and detachment permeating the creative process and the components of creativity. As a conclusion a morphological box for creativity is presented which allows one to show which combination of characteristics of the tensions support different stages of creativity. Furthermore implications for development and time management are discussed.
Geschäftsmodelle für das Internet der Dinge: Welche Geschäftsmodellinnovation passt zum Unternehmen?
(2020)
Thema der Diplomarbeit ist die Entwicklung, Erprobung und Inbetriebnahme einer automatisierten Montageeinheit einschließlich der Teilezuführung. Die Arbeit wird im Rahmen der "projektbezogene Konstruktionsausbildung" an einer Anlage in der Fachhochschule Düsseldorf durchgeführt. Die Anlage stellt eine Fertigungszelle dar, bei der ein Rundling mit einem Kunststoffstopfen versehen wird und anschließend eine Qualitätskontrolle mit Bildverarbeitung durchläuft. Ziel der Diplomarbeit ist es, anhand eines Projektes, den Ablauf und die Vorgehensweise des methodischen Konstruierens zur Lösung eines Problems zu erarbeiten. Darunter fallen das funktions- und systemorientierte Konstruieren, die Planung und Durchführung von Versuchen im Entwicklungsablauf und die Lieferantenfragen.
The optimization of full-scale biogas plant operation is of great importance to make biomass a competitive source of renewable energy. The implementation of innovative control and optimization algorithms, such as Nonlinear Model Predictive Control, requires an online estimation of operating states of biogas plants. This state estimation allows for optimal control and operating decisions according to the actual state of a plant. In this paper such a state estimator is developed using a calibrated simulation model of a full-scale biogas plant, which is based on the Anaerobic Digestion Model No.1. The use of advanced pattern recognition methods shows that model states can be predicted from basic online measurements such as biogas production, CH4 and CO2 content in the biogas, pH value and substrate feed volume of known substrates. The machine learning methods used are trained and evaluated using synthetic data created with the biogas plant model simulating over a wide range of possible plant operating regions. Results show that the operating state vector of the modelled anaerobic digestion process can be predicted with an overall accuracy of about 90%. This facilitates the application of state-based optimization and control algorithms on full-scale biogas plants and therefore fosters the production of eco-friendly energy from biomass.
Men afflicted with chronic obstructive pulmonary disease (COPD) show signs of muscle dysfunction, such as increased muscle fatigue and acidosis during exercise. We hypothesize that muscle elasticity of the lower extremities differs between patients with COPD and age-related controls. The shear modulus of the soleus muscle was measured non-invasively using MR elastography (MRE) at 0%, 5%, 10%, 15%, and 20% of the subject’s maximum applied force. The results from this study showed statistical differences between the patients and controls, even though there were no statistical differences in the maximum applied force.
Men afflicted with hypogonadism have reduced fat-free mass and in some cases a loss in muscle strength. We hypothesize that muscle elasticity of the lower extremities differs between patients with hypogonadism and healthy controls. The shear modulus of the soleus muscle was measured non-invasively using MR elastography (MRE) at 0%, 5%, 10%, 15%, and 20% of the subject’s maximum applied force. The results from this study showed statistical differences between the patients and controls, even though there were no statistical differences in applied force.
In the present contribution, the utilization of steel-mill gases for an industrial methanol synthesis process is described. The focus of this work is on the influence of syngas compositions derived from steel-mill gases on an industrial Cu/ZnO/Al2O3 catalyst. Elevated CO2 and H2O concentrations seem to have an irreversible impact on the activity of the catalyst. In order to obtain realistic gas composition for the catalyst tests, a process simulation of the methanol synthesis was conducted. The calculated gas compositions at the reactor inlet were applied in a practical test in order to evaluate the catalyst stability under steel mill gas conditions. No noticeable deactivation was observed.
Performance Testing and Optimization of Solar Assisted Heating Systems for Multi Family Houses
(2016)
Market and simulation analysis of PVT applications for the determination of new PVT test procedures
(2014)
The rock material pentlandite with the composition Fe4.5Ni4.5S8 was synthesized via high temperature synthesis from the elements. The structure and composition of the material was characterized via powder X-ray diffraction (PXRD), Mössbauer spectroscopy (MB), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and energy dispersive X-ray spectroscopy (EDX). Two preparation methods of pentlandite bulk electrodes are presented. In the first approach a piece of synthetic pentlandite rock is directly contacted via a wire ferrule. The second approach utilizes pentlandite pellets, pressed from finely ground powder, which is immobilized in a Teflon casing. Both electrodes, whilst being prepared by an additive-free method, reveal high durability during electrocatalytic conversions in comparison to common drop-coating methods. We herein showcase the striking performance of such electrodes to accomplish the hydrogen evolution reaction (HER) and present a standardized method to evaluate the electrocatalytic performance by electrochemical and gas chromatographic methods. Furthermore, we report stability tests via potentiostatic methods at an overpotential of 0.6 V to explore the material limitations of the electrodes during electrolysis under industrial relevant conditions.
Kohlendioxid, Biomasse und Regenerativer Strom - Ressourcen einer neuen Kohlenstoffwirtschaft?
(2017)
In dieser Arbeit wird ein allgemeingültiges Verfahren zur Tragfähigkeitsberechnung von hochübersetzenden Epizykloidengetrieben entwickelt. Epizykloidengetriebe sind spezielle Umlaufrädergetriebe mit epizykloidaler Triebstockverzahnung. Die Grundlage des Verfahrens bilden die Berechnungs- und Anwendungsnormen der DIN 3990. Neben der Herleitung des Rechengangs wird beispielhaft der Tragfähigkeitsnachweis für die Anwendung in einem urbanen Elektrofahrzeug ausgeführt. Das dabei betrachtete Epizykloidengetriebe hat eine Übersetzung von -34 bei einer maximalen Eingangsdrehzahl von 20.000 min-1 und einer zu übertragenden Leistung von 27 kW. Der Rechengang teilt sich auf in den Nachweis der Flankentragfähigkeit, der Zahnfußtragfähigkeit und der Fresstragfähigkeit. Das Vorgehen je Nachweis ist dabei vergleichbar: Es werden zunächst individuelle Faktoren berechnet, die anschließend in den rechnerischen Festigkeitsnachweis einfließen. Bei der Entwicklung des Rechenverfahrens wird auf eine Allgemeingültigkeit der Gleichungen geachtet. Damit wird die erstellte Auslegungsgrundlage auch für ein breites Einsatzspektrum außerhalb der Elektromobilität nutzbar. Für zukünftige Untersuchungen zu Aspekten der Dimensionierung und Anwendung der Epizykloidengetriebe werden Hinweise und Ansätze basierend auf den erlangten Erkenntnissen bereitgestellt.
Eye tracking is a measurement technique for determining the orientation and viewing direction of an individual’s eyes. It allows for an evaluation of the individual’s gaze and other related information.There is a wide variety of application areas for eye tracking, however the usage in engineeringindustry is still limited. This paper presents a case study for the use of eye tracking in a testingstation for electrical circuit breakers. The case study aims to evaluate the measurement and analysispossible with the Tobii wearable eye tracking system. From the case study, possibilities, limitationsand considerations for eye tracking in industrial settings are identified and discussed. The paperconcludes that while eye tracking can be used to effectively capture and visualize insightfulinformation, it faces major challenges related to subjectivity in analysis and labour intensiveness.
Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474), zuletzt geändert durch Gesetz vom 13. März 2008 (GV.NRW. S. 195), hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen.
Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474), zuletzt geändert durch Gesetz vom 13. März 2008 (GV.NRW. S. 195), hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen.
Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474), zuletzt geändert durch Gesetz vom 20. Dezember 2007 (GV.NRW. S. 750), hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen:
Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474), zuletzt geändert durch Gesetz vom 20. Dezember 2007 (GV.NRW. S. 750), hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen: