open_access
Refine
Year of publication
Document Type
- Article (80) (remove)
Keywords
- DOAJ (22)
- DEAL (3)
- Applied Mathematics (1)
- Automated Control Concept (1)
- Balance responsible party (1)
- Balancing energy (1)
- BestHeatNet (1)
- CO2 methanation (1)
- CO2Methanation (1)
- Chimney divergence angle (1)
- Control and Optimization (1)
- Deactivation (1)
- Design of experiments (1)
- Differential balancing group (1)
- Diversity of opinion (1)
- Dynamic operation (1)
- EBSILON®Professional (1)
- Efficiency (1)
- Electrical and Electronic Engineering (1)
- Electricity schedule registration (1)
- Energy Engineering and Power Technology (1)
- Extruded catalysts (1)
- FLiX (1)
- FliX (1)
- General Computer Science (1)
- General Energy (1)
- ISAVE (1)
- Innovation (1)
- Innovativeness (1)
- KIVi (1)
- Kessel und große Solarthermieanlagen (1)
- Kinetics (1)
- Kultur (1)
- Latin hypercube sampling (1)
- Long-term stability (1)
- Mechanical stability (1)
- Micro-Scale ORC Plant (1)
- Modeling and Simulation (1)
- Ni catalyst (1)
- Ni catalysts (1)
- Photovoltaic and battery storage systems (1)
- Power generation (1)
- Power-to-Gas (1)
- Power-to-gas (1)
- Prosumer (1)
- Regression analysis (1)
- Renewable Energy, Sustainability and the Environment (1)
- Research (1)
- Safety, Risk, Reliability and Quality (1)
- Sloped absorber surface (1)
- Solar chimney power plant (SCPP) (1)
- Solare-Prozesswärme-Standards (1)
- Standard load profile (1)
- Teaching (1)
- Theoretical Computer Science (1)
- Toleranz (1)
- aeroacoustics (1)
- aerodynamics (1)
- artificial neural networks (1)
- culture (1)
- culture dimensions (1)
- design of experiments (1)
- peer (1)
- spectral analysis (1)
Department/institution
- Fachbereich - Maschinenbau und Verfahrenstechnik (80) (remove)
The settling velocities of helminth eggs of three types, namely Ascaris suum (ASC), Trichuris suis (TRI), and Oesophagostomum spp. (OES), in clean tap water are computationally determined by means of computational fluid dynamics, using the general-purpose CFD software ANSYS Fluent 18.0. The previous measurements of other authors are taken as the basis for the problem formulation and validation, whereby the latter is performed by comparing the predicted sink velocities with those measured in an Owen tube. To enable a computational treatment, the measured shapes of the eggs are parametrized by idealizing them in terms of elementary geometric forms. As the egg shapes show a variation within each class, “mean” shapes are considered. The sink velocities are obtained through the computationally obtained drag coefficients. The latter are defined by means of steady-state calculations. Predicted sink velocities are compared with the measured ones. It is observed that the calculated values show a better agreement with the measurements, for ASC and TRI, compared to the theoretical sink values delivered by the Stokes theory. However, the observed agreement is still found not to be very satisfactory, indicating the role of further parameters, such as the uncertainties in the characterization of egg shapes or flocculation effects even in clean tap water.
A swirling pulverized coal flame is computationally investigated. A Eulerian–Lagrangian formulation is used to describe the two-phase flow. Turbulence is modelled within a RANS (Reynolds averaged numerical simulation) framework. Four turbulence viscosity- (TV) based models, namely the standard k-ε model, realizable k-ε model, renormalization group theory k-ε model, and the shear stress transport k-ω model are used. In addition, a Reynolds stress transport model (RSM) is employed. The models are assessed by comparing the predicted velocity fields with the measurements of other authors. In terms of overall average values, the agreement of the predictions to the measurements is observed to be within the range 20–40%. A better performance of the RSM compared to the TV models is observed, with a nearly twice as better overall agreement to the experiments, particularly for the swirl velocity. In the second part of the investigation, the resolution of the discrete particle phase in modelling the turbulent particle dispersion (TPD) and particle size distribution (SD) is investigated. Using the discrete random walk model for the TPD, it is shown that even five random walks are sufficient for an accuracy that is quite high, with a less than 1% mean deviation from the solution obtained by thirty random walks. The approximation of the measured SD is determined by a continuous Rosin–Rammler distribution function, and inaccuracies that can occur in its subsequent discretization are demonstrated and discussed. An investigation on the resolution of the SD by discrete particle size classes (SC) indicates that 12 SC are required for an accuracy with a less than 1% mean deviation from the solution with 18 SC. Although these numbers may not necessarily be claimed to be sufficiently universal, they may serve as guidance, at least for SD with similar characteristics
Computational investigation of hemodynamics in hardshell venous reservoirs: A comparative study
(2019)
Extracorporeal circulation using heart‐lung‐machines is associated with a profound activation of corpuscular and plasmatic components of circulating blood, which can also lead to deleterious events such as systemic inflammatory response and hemolysis. Individual components used to install the extracorporeal circulation have an impact on the level of activation, most predominantly membrane oxygenators and hardshell venous reservoirs as used in extracorporeal systems. The blood flows in two different hardshell reservoirs are computationally investigated. A special emphasis is placed on the prediction of an onset of transition and turbulence generation. Reynolds‐averaged numerical simulations (RANS) based on a transitional turbulence model, as well as large eddy simulations (LES) are applied to achieve an accurate prediction. In the LES analysis, the non‐Newtonian behavior of the blood is considered via the Carreau model. Blood damage potential is quantified applying the Modified Index of Hemolysis (MIH) based on the predicted flow fields. The results indicate that the flows in both reservoirs remain predominantly laminar. For one of the reservoirs, considerable turbulence generation is observed near the exit site, caused by the specific design for the connection with the drainage tube. This difference causes the MIH of this reservoir to be nearly twice as large as compared to the alternative design. However, a substantial improvement of these performance criteria can be expected by a local geometry modification.
Applicability of Aeroacoustic Scaling Laws of Leading Edge Serrations for Rotating Applications
(2020)
Magneto-hydrothermal triple-convection in a W-shaped porous cavity containing oxytactic bacteria
(2022)
Bioconvective heat and mass transport phenomena have recently been the subject of interest in diverse fields of applications pertaining to the motion of fluids and their thermophysical properties. The transport processes in a system involving triple convective phenomena, irregular geometry, and boundary conditions constitute a complex phenomenon. This work aims to explore the mixed thermo-bioconvection of magnetically susceptible fluid containing copper nanoparticles and oxytactic bacteria in a novel W-shaped porous cavity. The buoyant convention is generated due to the isothermal heating at the wavy bottom wall, whereas the mixed convection is induced due to the shearing motion of the top-cooled sliding wall. Furthermore, the bioconvection is induced due to the manifestation of oxytactic bacteria or organisms. The inclined sidewalls are insulated. The geometry is packed with water based Cu nanoparticle mixed porous structure, which is subjected to a magnetizing field acted horizontally. The complex transport equations are transformed into nondimensional forms, which are then computed using the finite volume-based developed code. The coupled triple-convective flow physics are explored for a wide range of involved controlling parameters, which could provide helpful insight to the system designer for its proper operation. The shape of geometry can be considered one of the important parameters to control the heat and mass transport phenomena. In general, the influence of amplitude (δ) is more compared to the waviness number (m) of the undulations. The magnitude of heat (Nu) and mass (Sh) transfer rate for the W-shaped cavity is high compared to conventional square and trapezoidal-shaped cavities. The output of the analysis could be very helpful for the designer for modeling devices operating on nanotechnology-based bioconvection, microbial fuel cells, and others.
This paper deals with the design of a micro-scale ORC plant for teaching and research including the development of an automated control concept. The aim is to provide a safe and environmentally acceptable micro-scale heat engine, which can be developed, implemented and used in university labs for the education of students as well as for small research projects. The test rig allows the support of several learning outcomes on a multi-disciplinary level particularly for the implementation and simulation of small power systems. Special attention was given to the organic working fluid characteristics and its selection process. In addition to the above-mentioned performance goals, favourable safety properties and low global warming potential were decisive in the selection of the novel organic fluid called 3M™ Novec™ 649. The performance and the fluid behaviour of Novec 649 in a micro-scale power cycle are of major interest and the research goal for the test rig presented in this paper. Due to the expected power output of 1 kW, a scroll expander was chosen as the generator drive for the micro plant. In order to design the major parts of the ORC, the thermodynamic simulation software EBSILON®Professional was used. The supply temperature was set to 140 °C. As a result of the simulation, feasible expander inlet pressures spread from 5.5 bar to 8.5 bar. This leads to thermal efficiencies of the ORC in the order of 5 %. Adding a recuperator to the cycle system decreases the operating pressure range but in the end, the thermal efficiency can be increased by 1.5 %-points up to 6.2 %. Finally, an automated control concept is introduced, where the pump is controlled via the fill level measurement system.
Geschäftsmodelle für das Internet der Dinge: Welche Geschäftsmodellinnovation passt zum Unternehmen?
(2020)
Management des Innovationsportfolios: Portfolio-Matrizen zumManagement von Innovationsprojekten
(2021)
The links between innovativeness as a driver of economic performance, and the determinants of innovativeness have been investigated by management scholars and economists for decades, focusing mostly on “hard factors” as investment in research and development, or education. Focusing on a relatively neglected, but in times of globalization even more important aspect, the infuence of cultural characteristics on innovativeness, we apply diferent econometric models to test for links between cultural tightness and looseness on the one hand, and national innovativeness on the other hand. We fnd that cultural tightness—in the sense of homogenous and intolerant societies—has a negative link to national innovativeness, while cultural looseness—in the sense of tolerant and diverse societies—displays a positive link to national innovativeness.
In the context of using renewable energies and recycling climate-changing gases, methanation of CO2 provides one possibility. However, volatile availability of renewable energies for hydrogen production and fluctuating CO2streams from different sources lead to enhanced demand in investigating the influence of dynamic process operation on the catalyst performance, including detailed kinetic characterization. Reliable kinetic measurements require isothermal temperature control and absence of macrokinetic diffusion limitations. Both were investigated in this work while the determination of steady-state kinetic parameters is part of ongoing studies. Furthermore, a detailed analysis with respect to the long-term-stability of the nickel-based catalyst was performed
Today, the use of renewable energies and recycling of climate-changing gases are increasingly important. In this context,coupling of methanation with small, decentralized CO2sources such as biogas plants provides one possibility. However,fluctuating availability of renewables for hydrogen production in combination with small storage volumes result in anenhanced demand for dynamic process operation. This leads to new research challenges with respect to the required cata-lysts and the overall process design. To draw reliable conclusions about the catalytic performance under dynamic processoperation, the mechanism of the methanation reaction as well as typical deactivation procedures of the catalyst appliedunder steady-state conditions have to be reviewed thoroughly.
Synthesis and Analysis of a Novel Linkage Mechanism with the Helical Motion of the End-Effector
(2020)
The optimization of full-scale biogas plant operation is of great importance to make biomass a competitive source of renewable energy. The implementation of innovative control and optimization algorithms, such as Nonlinear Model Predictive Control, requires an online estimation of operating states of biogas plants. This state estimation allows for optimal control and operating decisions according to the actual state of a plant. In this paper such a state estimator is developed using a calibrated simulation model of a full-scale biogas plant, which is based on the Anaerobic Digestion Model No.1. The use of advanced pattern recognition methods shows that model states can be predicted from basic online measurements such as biogas production, CH4 and CO2 content in the biogas, pH value and substrate feed volume of known substrates. The machine learning methods used are trained and evaluated using synthetic data created with the biogas plant model simulating over a wide range of possible plant operating regions. Results show that the operating state vector of the modelled anaerobic digestion process can be predicted with an overall accuracy of about 90%. This facilitates the application of state-based optimization and control algorithms on full-scale biogas plants and therefore fosters the production of eco-friendly energy from biomass.
Men afflicted with chronic obstructive pulmonary disease (COPD) show signs of muscle dysfunction, such as increased muscle fatigue and acidosis during exercise. We hypothesize that muscle elasticity of the lower extremities differs between patients with COPD and age-related controls. The shear modulus of the soleus muscle was measured non-invasively using MR elastography (MRE) at 0%, 5%, 10%, 15%, and 20% of the subject’s maximum applied force. The results from this study showed statistical differences between the patients and controls, even though there were no statistical differences in the maximum applied force.
Men afflicted with hypogonadism have reduced fat-free mass and in some cases a loss in muscle strength. We hypothesize that muscle elasticity of the lower extremities differs between patients with hypogonadism and healthy controls. The shear modulus of the soleus muscle was measured non-invasively using MR elastography (MRE) at 0%, 5%, 10%, 15%, and 20% of the subject’s maximum applied force. The results from this study showed statistical differences between the patients and controls, even though there were no statistical differences in applied force.
In the present contribution, the utilization of steel-mill gases for an industrial methanol synthesis process is described. The focus of this work is on the influence of syngas compositions derived from steel-mill gases on an industrial Cu/ZnO/Al2O3 catalyst. Elevated CO2 and H2O concentrations seem to have an irreversible impact on the activity of the catalyst. In order to obtain realistic gas composition for the catalyst tests, a process simulation of the methanol synthesis was conducted. The calculated gas compositions at the reactor inlet were applied in a practical test in order to evaluate the catalyst stability under steel mill gas conditions. No noticeable deactivation was observed.
Methanol Synthesis with Steel Mill Gases: Performance Investigations in an On‐Site Technical Center
(2021)
The rock material pentlandite with the composition Fe4.5Ni4.5S8 was synthesized via high temperature synthesis from the elements. The structure and composition of the material was characterized via powder X-ray diffraction (PXRD), Mössbauer spectroscopy (MB), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and energy dispersive X-ray spectroscopy (EDX). Two preparation methods of pentlandite bulk electrodes are presented. In the first approach a piece of synthetic pentlandite rock is directly contacted via a wire ferrule. The second approach utilizes pentlandite pellets, pressed from finely ground powder, which is immobilized in a Teflon casing. Both electrodes, whilst being prepared by an additive-free method, reveal high durability during electrocatalytic conversions in comparison to common drop-coating methods. We herein showcase the striking performance of such electrodes to accomplish the hydrogen evolution reaction (HER) and present a standardized method to evaluate the electrocatalytic performance by electrochemical and gas chromatographic methods. Furthermore, we report stability tests via potentiostatic methods at an overpotential of 0.6 V to explore the material limitations of the electrodes during electrolysis under industrial relevant conditions.
A numerical study is carried out meticulously to scrutinize the impact of different shapes of chimneys like circular (outer dia, dc), convergent (outer dia, 0.5dc), divergent (outer dia, 1.5dc), sudden contraction (outer dia, 0.5dc), and sudden expansion (outer dia, 1.5dc) on the performance of an SCPP. Furthermore, the parametric impact with different chimney divergence angles (CDA, ϕ), and ground absorber slope angle (GSA, γ) on the SCPP performance is also scrutinized. Optimum divergence angle (ϕ=+0.75◦) enhances the power generation up to ~ 47% (76 kW) with a horizontal ground absorber surface. An increase or decrease in CDA lessens the power generation. With a sloped ground absorber angle γ=0.6◦, the gain in power generation is 60% (82 kW). The study of combination of ground sloped absorber (γ=0.6◦) and divergent chimney (ϕ=+0.75◦) shows enhancement of the power generation upto 80% (92 kW) more than the classical Manzaranes plant.
Thermoelectric generators (TEGs) have the ability to convert waste heat into electrical energy under unfavorable conditions and are becoming increasingly popular in academia, but have not yet achieved a broad commercial success, due to the still comparably low efficiency. To increase the efficiency and economic viability of TEGs, research is performed on the materials on one hand and on the system connection on the other. In the latter case, the net output power of the cooling system plays a key role. At first glance, passive cooling seems preferable to active cooling because it does not affect the net electrical output power. However, as shown in the present review, the active cooling is to be preferred for net output power. The situation is similar in air and water-cooling. Even though air-cooling is easier to set up, the water-cooling should be preferred to achieve higher net output power. It is shown that microchannel cooling has similar hydraulic performance to conventional cooling and inserts increase the net output power of TEG. As the review reveals that active water-cooling should be the method of choice to achieve high net output power, it also shows that a careful optimization is necessary to exploit the potential.
Airborne volcanic ash particles are a known hazard to aviation. Currently, there are no means available to detect ash in flight as the particles are too fine (radii < 30 μm) for on-board radar detection and, even in good visibility, ash clouds are difficult or impossible to detect by eye. The economic cost and societal impact of the April/May 2010 Icelandic eruption of Eyjafjallajökull generated renewed interest in finding ways to identify airborne volcanic ash in order to keep airspace open and avoid aircraft groundings. We have designed and built a bi-spectral, fast-sampling, uncooled infrared camera device (AVOID) to examine its ability to detect volcanic ash from commercial jet aircraft at distances of more than 50 km ahead. Here we report results of an experiment conducted over the Atlantic Ocean, off the coast of France, confirming the ability of the device to detect and quantify volcanic ash in an artificial ash cloud created by dispersal of volcanic ash from a second aircraft. A third aircraft was used to measure the ash in situ using optical particle counters. The cloud was composed of very fine ash (mean radii ~10 μm) collected from Iceland immediately after the Eyjafjallajökull eruption and had a vertical thickness of ~200 m, a width of ~2 km and length of between 2 and 12 km. Concentrations of ~200 μg m(-3) were identified by AVOID at distances from ~20 km to ~70 km. For the first time, airborne remote detection of volcanic ash has been successfully demonstrated from a long-range flight test aircraft.
Impact of Renewable Energy Expansion to the Balancing Energy Demand of Differential Balancing Groups
(2018)
The research addresses the present situation on the German electricity market caused by variable renewable energy sources. The increasing number of households with photovoltaic and battery storage systems and their impacts require special attention. These systems change the traditional electricity customer from the sole electricity consumer to an electricity producer and consumer in one person. These so-called prosumers differ in their actual electricity demand from the initially estimated electricity demand with standard load profile. This discrepancy results in deviations within a differential balancing group. Thereby, the main finding of this research is a significant higher balancing energy demand with the expansion of photovoltaic and battery storage systems. Hence, the standard load profile is particularly not suitable for differential balancing groups with a high penetration of solar systems and still less suitable for groups with solar and battery storage systems
Heterogeneous catalysts usually consist of porous, inorganic materials. Especially in the mobile application, e.g., in exhaust gas catalysis as a part of the gas line of an engine, there are loads due to vibrations and high gas velocities. It can be assumed that physical stress will lead to a loss of the catalytically active coating. The present contribution describes experimental setups and methods for a systematic and reproducible investigation of the main influences to the mass loss due to vibrational and fluid‐mechanical stress caused by particle‐free gas flows.
eFood in Deutschland
(2015)
Im Vergleich zu „Pionierbranchen“ wie Mode oder Medien steht der Online-Handel mit Lebensmitteln erst am Anfang. Dabei kann dieser zu einem Wettbewerbsvorteil werden – wenn der Handel es richtig angeht. Auf der anderen Seite steht das Risiko einer strategischen Falle, d.h. es wird unter Umständen aufgrund der Widerstände beim Verbraucher nur ein Nischenmarkt bedient, der eine geringe Profitabilität aufweist. Im Spannungsfeld „Marktpotenzial auf Handelsseite“ vs. „Zurückhaltung beim Verbraucher“ rücken dabei Fragen der Kommunikationspolitik im Online-Lebensmittelhandel in den Fokus. Für eine erfolgreiche Umsetzung stellt eine eindeutige Typologie eine notwendige Basis dar, um die konkreten Bedürfnisse potenzieller Konsumenten anzusprechen. Ein Engagement im eFood-Bereich ist daher als Investition in die zukünftige Entwicklung der Märkte und ihrer Zielgruppen zu betrachten. Although online trading in the food sector is still in early stages, it may become a competitive edge – if retailers go about it the right way. On the other hand, due to consumer resistance, there is the risk of serving only a niche market, which cannot be maintained in terms of profitability. Therefore, a stronger focus on communication policies is needed. Engaging in the eFood sector finally has to be seen as an important investment into future markets and their target groups. Keywords: online lebensmittelhandel, lieferfenster, informationszeitalter, face to the customer