Refine
Year of publication
- 2017 (4) (remove)
Document Type
- Conference Proceeding (4) (remove)
Has Fulltext
- no (4)
Keywords
- EnerTEG (1)
- Engineering Conferences (1)
- Heizung (1)
- energiBUS4home (1)
Department/institution
The ability to understand and predict the pressure losses of orifices is important in order to improve the air flow within the secondary air system. This experimental study investigates the behavior of the discharge coefficient for circular orifices with inlet cross flow which is a common flow case in gas turbines. Examples of this are at the inlet of a film cooling hole or the feeding of air to a blade through an orifice in a rotor disk. Measurements were conducted for a total number of 38 orifices, covering a wide range of length-to-diameter ratios, including short and long orifices with varying inlet geometries. Up to five different chamfer-to-diameter and radius-to-diameter ratios were tested per orifice length. Furthermore, the static pressure ratio across the orifice was varied between 1.05 and 1.6 for all examined orifices. The results of this comprehensive investigation demonstrate the beneficial influence of rounded inlet geometries and the ability to decrease pressure losses, which is especially true for higher cross flow ratios where the reduction of the pressure loss in comparison to sharp-edged holes can be as high as 54%. With some exceptions, the chamfered orifices show a similar behavior as the rounded ones but with generally lower discharge coefficients. Nevertheless, a chamfered inlet yields lower pressure losses than a sharp-edged inlet. The obtained experimental data were used to develop two correlations for the discharge coefficient as a function of geometrical as well as flow properties.
This article is on a university course called Engineering Conferences. It has been developed by the authors and installed as a mandatory part of the curriculum in three master’s degree programs for engineering students. The participants of the course are postgraduates with different nationalities, mostly German, and different technical backgrounds. They study Mechanical Engineering, Simulation and Experimental Technology, or International Business Engineering. The basic idea of the course concept goes far beyond simply teaching the standards of academic writing and skills for using scientific publications. By using a learnercentered approach, the students get engaged in typical activities around an active attendance of a real conference. Students learn to locate the field of their bachelor thesis or project report in the world of research communities, scientific journals and engineering conferences. They learn about conferences matching their bachelor/project topic. They write a paper complying with common academic standards, submit it to a mock-up conference, and review submissions of their fellow students. Students also produce a poster and have to defend it in a poster session held publicly on the campus. Engineering Conferences is a course on scientific communication and presentation that also aims at the development of other skills and competences needed in the world of modern engineering.