Camera-based object detection is widely used in safety-critical applications such as advanced driver assistance systems (ADAS) and autonomous vehicle research. Road infrastructure has been designed for human vision, so computer vision, with RGB cameras, is a vital source of semantic information from the environment. Sensors, such as LIDAR and RADAR, are also often utilized for these applications; however, cameras provide a higher spatial resolution and color information. The spatial frequency response (SFR), or sharpness of a camera, utilized in object detection systems must be sufficient to allow a detection algorithm to localize objects in the environment over its lifetime reliably. This study explores the relationship between object detection performance and SFR. Six state-of-the-art object detection models are evaluated with varying levels of lens defocus. A novel raw image dataset is created and utilized, containing pedestrians and cars over a range of distances up to 100-m from the sensor. Object detection performance for each defocused dataset is analyzed over a range of distances to determine the minimum SFR necessary in each case. Results show that the relationship between object detection performance and lens blur is much more complex than previous studies have found due to lens field curvature, chromatic aberration, and astigmatisms. We have found that smaller objects are disproportionately impacted by lens blur, and different object detection models have differing levels of robustness to lens blur
Applicability of Aeroacoustic Scaling Laws of Leading Edge Serrations for Rotating Applications
(2020)
Poor young people more often face health difficulties, (learning) disabilities, and are overrepresented in special schools. Consequently, youth from poor households disproportionately frequently participate in disability‐specific programs aiming to improve their educational levels and labor market opportunities. They face a double burden of disability and poverty. In our study, we look at poor and non‐poor youth with disabilities (YPWD) who participate in vocational rehabilitation (VR) and whether VR helps them (a) in transitioning into employment and (b) in leaving poverty. We examine the association between the receipt of initial basic income support (BIS) as a poverty indicator, later labor market outcomes, and earned vocational qualification using administrative data. We make use of a sample of all persons accepted for VR in 2010 (N = 36,645). We employ logit models on VR attendees’ labor market outcomes three and five years after being accepted for VR as well as on their earned vocational qualifications. Beside initial poverty status, we control for educational level, type, and degree of disability and program pattern during the VR process. Our findings show that YPWD from poor households have a decreased likelihood of a vocational certificate and employment. Additionally, they are more likely to receive BIS than young people not from poor households and thus more likely to remain poor. In conclusion, VR seems to support poor YPWD less in their school‐to‐work transitions. Thus, disability‐specific programs should be more tailored to the social situations of participants, and counsellors should be more sensitive to their social backgrounds.
Magneto-hydrothermal triple-convection in a W-shaped porous cavity containing oxytactic bacteria
(2022)
Bioconvective heat and mass transport phenomena have recently been the subject of interest in diverse fields of applications pertaining to the motion of fluids and their thermophysical properties. The transport processes in a system involving triple convective phenomena, irregular geometry, and boundary conditions constitute a complex phenomenon. This work aims to explore the mixed thermo-bioconvection of magnetically susceptible fluid containing copper nanoparticles and oxytactic bacteria in a novel W-shaped porous cavity. The buoyant convention is generated due to the isothermal heating at the wavy bottom wall, whereas the mixed convection is induced due to the shearing motion of the top-cooled sliding wall. Furthermore, the bioconvection is induced due to the manifestation of oxytactic bacteria or organisms. The inclined sidewalls are insulated. The geometry is packed with water based Cu nanoparticle mixed porous structure, which is subjected to a magnetizing field acted horizontally. The complex transport equations are transformed into nondimensional forms, which are then computed using the finite volume-based developed code. The coupled triple-convective flow physics are explored for a wide range of involved controlling parameters, which could provide helpful insight to the system designer for its proper operation. The shape of geometry can be considered one of the important parameters to control the heat and mass transport phenomena. In general, the influence of amplitude (δ) is more compared to the waviness number (m) of the undulations. The magnitude of heat (Nu) and mass (Sh) transfer rate for the W-shaped cavity is high compared to conventional square and trapezoidal-shaped cavities. The output of the analysis could be very helpful for the designer for modeling devices operating on nanotechnology-based bioconvection, microbial fuel cells, and others.
A swirling pulverized coal flame is computationally investigated. A Eulerian–Lagrangian formulation is used to describe the two-phase flow. Turbulence is modelled within a RANS (Reynolds averaged numerical simulation) framework. Four turbulence viscosity- (TV) based models, namely the standard k-ε model, realizable k-ε model, renormalization group theory k-ε model, and the shear stress transport k-ω model are used. In addition, a Reynolds stress transport model (RSM) is employed. The models are assessed by comparing the predicted velocity fields with the measurements of other authors. In terms of overall average values, the agreement of the predictions to the measurements is observed to be within the range 20–40%. A better performance of the RSM compared to the TV models is observed, with a nearly twice as better overall agreement to the experiments, particularly for the swirl velocity. In the second part of the investigation, the resolution of the discrete particle phase in modelling the turbulent particle dispersion (TPD) and particle size distribution (SD) is investigated. Using the discrete random walk model for the TPD, it is shown that even five random walks are sufficient for an accuracy that is quite high, with a less than 1% mean deviation from the solution obtained by thirty random walks. The approximation of the measured SD is determined by a continuous Rosin–Rammler distribution function, and inaccuracies that can occur in its subsequent discretization are demonstrated and discussed. An investigation on the resolution of the SD by discrete particle size classes (SC) indicates that 12 SC are required for an accuracy with a less than 1% mean deviation from the solution with 18 SC. Although these numbers may not necessarily be claimed to be sufficiently universal, they may serve as guidance, at least for SD with similar characteristics
Thermoelectric generators (TEGs) have the ability to convert waste heat into electrical energy under unfavorable conditions and are becoming increasingly popular in academia, but have not yet achieved a broad commercial success, due to the still comparably low efficiency. To increase the efficiency and economic viability of TEGs, research is performed on the materials on one hand and on the system connection on the other. In the latter case, the net output power of the cooling system plays a key role. At first glance, passive cooling seems preferable to active cooling because it does not affect the net electrical output power. However, as shown in the present review, the active cooling is to be preferred for net output power. The situation is similar in air and water-cooling. Even though air-cooling is easier to set up, the water-cooling should be preferred to achieve higher net output power. It is shown that microchannel cooling has similar hydraulic performance to conventional cooling and inserts increase the net output power of TEG. As the review reveals that active water-cooling should be the method of choice to achieve high net output power, it also shows that a careful optimization is necessary to exploit the potential.
The settling velocities of helminth eggs of three types, namely Ascaris suum (ASC), Trichuris suis (TRI), and Oesophagostomum spp. (OES), in clean tap water are computationally determined by means of computational fluid dynamics, using the general-purpose CFD software ANSYS Fluent 18.0. The previous measurements of other authors are taken as the basis for the problem formulation and validation, whereby the latter is performed by comparing the predicted sink velocities with those measured in an Owen tube. To enable a computational treatment, the measured shapes of the eggs are parametrized by idealizing them in terms of elementary geometric forms. As the egg shapes show a variation within each class, “mean” shapes are considered. The sink velocities are obtained through the computationally obtained drag coefficients. The latter are defined by means of steady-state calculations. Predicted sink velocities are compared with the measured ones. It is observed that the calculated values show a better agreement with the measurements, for ASC and TRI, compared to the theoretical sink values delivered by the Stokes theory. However, the observed agreement is still found not to be very satisfactory, indicating the role of further parameters, such as the uncertainties in the characterization of egg shapes or flocculation effects even in clean tap water.