Refine
Year of publication
Document Type
- Conference Proceeding (19)
- Article (10)
- Part of a Book (2)
- Workingpaper / Report (2)
- Diploma Thesis (1)
- Doctoral Thesis (1)
Is part of the Bibliography
- no (35) (remove)
Keywords
- Sound Spatialization (5)
- human perception (5)
- Resource Management (4)
- VSVR (4)
- audio rendering (4)
- user interface design (3)
- virtual environments (3)
- FHD (2)
- Virtual (TV) Studio (2)
- Visualization (2)
Department/institution
The PSFC, or Pioneer sound field control system, is a DSP-driven hemispherical 14-loudspeaker array, installed at the University of Aizu Multimedia Center. Collocated with a large screen rear-projection stereographic display the PSFC features realtime control of virtual room characteristics and direction of two separate sound channels, smoothly steering them around a configurable soundscape. The PSFC controls an entire sound field, including sound direction, virtual distance, and simulated environment (reverb level, room size and liveness) for each source. It can also configure a dry (DSP-less) switching matrix for direct directionalization. The PSFC speaker dome is about 14 m in diameter, allowing about twenty users at once to comfortably stand or sit near its sweet spot.
The PSFC, or Pioneer Sound Field Controller, is a DSP-driven hemispherical loudspeaker array, installed at the University of Aizu Multimedia Center. The PSFC features realtime manipulation of the primary components of sound spatialization for each of two audio sources located in a virtual environment, including the content (apparent direction and distance) and context (room characteristics: reverberation level, room size and liveness). In an alternate mode, it can also direct the destination of the two separate input signals across 14 loudspeakers, manipulating the direction of the virtual sound sources with no control over apparent distance other than that afforded by source loudness (including no simulated environmental reflections or reverberation). The PSFC speaker dome is about 10 m in diameter, accommodating about fifty simultaneous users, including about twenty users comfortably standing or sitting near its ``sweet spot,'' the area in which the illusions of sound spatialization are most vivid. Collocated with a large screen rear-projection stereographic display, the PSFC is intended for advanced multimedia and virtual reality applications.
The task of the Center for Language Research is to provide content-based English language instruction for students of computer science and engineering. As such, we find ourselves at the confluence of many of the streams currently running through the English Language Teaching profession, including English for Science and Technology (EST), English for Academic Purposes (EAP), English for Specific Purposes (ESP), Computer-assisted language learning (CALL), content-based instruction, and multimedia applications in foreign language pedagogy. This paper describes our initial attempts to construct a number of World Wide Web pages where students will be able to study EST, EAP, and computer science topics on their own in a multimedia environment.
Cyberspatial audio applications are distinguished from the broad range of spatial audio applications in a number of important ways that help to focus this review. Most significant is that cyberspatial audio is most often designed to be responsive to user inputs. In contrast to non-interactive auditory displays, cyberspatial auditory displays typically allow active exploration of the virtual environment in which users find themselves. Thus, at least some portion of the audio presented in a cyberspatial environment must be selected, processed, or otherwise rendered with minimum delay relative to user input. Besides the technological demands associated with realtime delivery of spatialized sound, the type and quality of auditory experiences supported are also very different from those associated with displays that support stationary sound localization.
Education at the University of Aizu is focussed upon computer science. Besides being the subject matter of many courses, however, the computer also plays a vital role in the educational process itself, both in the distribution of instructional media, and in providing students with valuable practical experience. All students have unlimited access (24-hours-a-day) to individual networked workstations, most of which are multimedia-capable (even video capture is possible in two exercise rooms). Without software and content tailored for computer-aided instruction, the hardware becomes an expensive decoration. In any case, there is a need to better educate the instructors and students in the use of the equipment. In the interest of facilitating effective, collaborative use of network-based computers in teaching, this article explores the impact that a network environment can have on such activities. First, as a general overview, and to examine the motivation for the use of a network environment in teaching, this article reviews a range of different styles of collaboration. Then the article shows what kind of tools are available for use, within the context of what has come to be called Computer-Supported Cooperative Work (CSCW).
The Sound Spatialization Framework is a C++ toolkit and development environment for providing advanced sound spatialization for virtual reality and multimedia applications. The Sound Spatialization Framework provides many powerful display and user-interface features not found in other sound spatialization software packages. It provides facilities that go beyond simple sound source spatialization: visualization and editing of the soundscape, multiple sinks, clustering of sound sources, monitoring and controlling resource management, support for various spatialization backends, and classes for MIDI animation and handling.
Broader use of virtual reality environments and sophisticated animations spawn a need for spatial sound. Until now, spatial sound design has been based very much on experience and trial and error. Most effects are hand-crafted, because good design tools for spatial sound do not exist. This paper discusses spatial sound authoring and its applications, including shared virtual reality environments based on VRML. New utilities introduced by this research are an inspector for sound sources, an interactive resource manager, and a visual soundscape manipulator. The tools are part of a sound spatialization framework and allow a designer/author of multimedia content to monitor and debug sound events. Resource constraints like limited sound spatialization channels can also be simulated.
The Sound Spatialization Framework is a C++ toolkit and development environment for providing advanced sound spatialization for virtual reality and multimedia applications. The Sound Spatialization Framework provides many powerful display and user-interface features not found in other sound spatialization software packages. It provides facilities that go beyond simple sound source spatialization: visualization and editing of the soundscape, multiple sinks, clustering of sound sources, monitoring and controlling resource management, support for various spatialization backends, and classes for MIDI animation and handling.
Keywords:
sound spatialization, resource management, virtual environments, spatial sound authoring, user interface design, human-machine interfaces
Digital broadcasting enables interactive \sc tv, which presents new challenges for interactive content creation. Besides the technology for streaming and viewing, tools and systems are under development that extend traditional \sc tv studios with virtual set environments. This presentation reviews current technology and describes the requirements for such systems. Interoperability over the production, streaming, and viewer levels requires open interfaces. As the technology allow more interaction, it becomes inherent difficult to control the quality of the viewers experience
Virtual sets have evolved from computer-generated, prerendered 2D backgrounds to realtime, responsive 3D computer graphics and are nowadays standard repertoire of broadcasting divisions. The graphics, which are combined with real video feed becoming moresophisticated, real looking and more responsive. We will look at the recent developments and suggest further developments like integration of spatial audio into the studio production and generating interactive media streams. Educational institutes recognize the demands of the rising media industry and established new courses on media technology like the Duesseldorf University of Applied Sciences.
In a virtual reality environment, users are immersed in a scene with objects which might produce sound. The responsibility of a VR environment is to present these objects, but a practical system has only limited resources, including spatialization channels (mixels), MIDI/audio channels, and processing power. A sound spatialization resource manager, introduced in this thesis, controls sound resources and optimizes fidelity (presence) under given conditions, using a priority scheme based on psychoacoustics. Objects which are spatially close together can be coalesced by a novel clustering algorithm, which considers listener localization errors. Application programmers and VR scene designers are freed from the burden of assigning mixels and predicting sound source locations. The framework includes an abstract interface for sound spatialization backends, an API for the VR environments, and multimedia authoring tools.
Level-of-detail is a concept well-known in computer graphics to reduce the number of rendered polygons. Depending on the distance to the subject (viewer), the objects’ representation is changed. A similar concept is the clustering of sound sources for sound spatialization. Clusters can be used to hierarchically organize mixels and to optimize the use of resources, by grouping multiple sources together into a single representative ource. Such a clustering process should minimize the error of position allocation of
elements, perceived as angle and distance, and also differences between velocity relative to the sink (i.e., Doppler shift). Objects with similar direction of motion and speed (relative to sink) in the same acoustic resolution cone and with similar distance to a sink can be grouped together.
A module for soundscape monitoring and visualizing resource management processes was extended for presenting clusters, generated by a novel sound source clustering algorithm. This algorithm groups multiple sound sources together into a single representative source, considering localization errors depending on listener orientation. Localization errors are visualized for each cluster using resolution cones. Visualization is done in runtime and allows understanding and evaluation of the clustering algorithm.
A module for soundscape monitoring and visualizing resource management processes was extended for presenting clusters, generated by a novel sound source clustering algorithm. This algorithm groups multiple sound sources together into a single representative source, considering localization errors depending on listener orientation. Localization errors are visualized for each cluster using resolution cones. Visualization is done in runtime and allows understanding and evaluation of the clustering algorithm.
Der Programmier System Generator - PSG - des Fachgebiets Praktische Informatik in Darmstadt erzeugt aus einer Sprachdefinition eine sprachspezifische Programmierumgebung. Diese besteht u. a. aus einem Editor, welcher syntaktische und semantische Fehler von Programmfragmenten, die nicht vollständig sein müssen, erkennen kann. Dem Benutzer werden per Menü Fehlerkorrekturen angeboten. Neben der freien Texteingabe besteht die Möglichkeit, den Text nur mit Hilfe von Menüs zu verfeinern. Teil dieses Editors ist die Bezeichneranalyse. Sie dient als Hilfsmittel für den Benutzer, indem für jede Stelle eines Programmfragmentes die gültigen Bezeichner ausgegeben werden können. Die Kontextanalyse setzt die Berechnung auf den von der Bezeichneranalyse erzeugten Daten auf, um semantische Fehler zu erkennen. Die bis zu dieser Arbeit verwendete Bezeichneranalyse im PSG unterstützt nur einfache Sprachkonzepte (z. B. Fortran und Pascal). Die Gültigkeitskonzepte der Bezeichner von weiterentwickelten Sprachen (z. B. Modula-2, CHILL, Ada oder Pascal-XT) sind nicht vollständig modellierbar. Wir stellen ein neues Konzept zur Definition und Berechnung der Bezeichneranalyse vor, das alle uns bekannten Sprachen mit statischer Typbindung unterstützt. Hierfür haben wir die Sprache BIS - Bezeichneridentifikationssprache - definiert. Die Methode ist verwandt mid dem Zwischencode für geordnete Attributierte Grammatiken. Für jeden Knoten des Abstrakten Syntaxbaumes wird mit Hilfe von BIS ein Code für eine abstrakte Maschine, welche die Bezeichneranalyse durchführt, geschrieben. Im Gegensatz zu herkömlichen Methoden (verkettete Symboltabellen) wird für jeden Punkt innerhalb eines Programmes for der Anfrage durch den Benutzer oder der Kontextanalyse die Menge der gültigen Bezeichner berechnet. Die Kosten für eine Anfrage sind dadurch minimal. Diese abstrakte Maschine teilt sich in zwei unabhängige Maschinen auf, zum einen in die S-Maschine, die die speziellen Operationen der Bezeichneranalyse durchführt, und zum anderen in die G-Maschine, die den Datenfluss und die Auswertung steuert. Diese Aufteilung ermöglicht den Austausch der S-Maschine durch eine andere, welche neue Anwendungsgebiete erschliesst, z. B. die eines Praeprozessors. Die G-Maschine arbeitet inkrementell; es werden nur die Codeschablonen neu ausgewertet, deren geerbten Attribute sich geändert haben. Dazu müssen die Daten, die in einer Codeschablone hinein- und hinausfliessen, abgelegt werden. Dies ergibt bei grossen Programmfragmenten eine immense Rechenzeiteinsparung auf Kosten des Speicherplatzes. Die Funktionsweise wird an einer kleinen Beispielsprache demonstriert, die zu Pascal ähnlich ist. Diese besitzt Konstrukte zum Import und Export von Daten und Datentypen zwischen Programmfragmenten. Im Prototyp kann die inkrementelle Arbeitsweise abgeschaltet werden und ermöglicht einen guten Vergleich der Verfahren.
Texturen können als Oberflächenstrukturen realer Objekt aufgefasst werden und sind Variationen in Farbe, Geometrie, Transparenz, usw.. Im Gegensatz zu Algorithmen für die künstliche Generierung von Texturen gibt es nur wenige Ansätze zu Textur-Synthese-Sprachen oder zu Hilfsmittel für die Textur-Beschreibung. Die bekannten Werkzeuge decken zudem jeweils nur Teilgebiete der Generierung ab. Mit HiLDTe (Hierachical Language for the Description of Textures) ist nun eine Sprache entwickelt worden, mit der möglichst alle bekannten Texturtypen beschrieben werden können. HiLDTe basiert auf einem am Fachgebiet GRIS entwickelten Texturmodell, in dem Texturen generische, eventuell komplex zusammengesetzte Objekte repräsentieren. Aufgabe dieser Arbeit war es nun, Konzepte für die Sprache HiLDTe zu entwickeln, eine entsprechende Grammatik aufzubauen und mit Hilfe der UNIX-Werkzeuge LEX und YACC einen Compiler zu implementieren, mit dem ein ausführbarer Zwischen-Code für die in HiLDTe spezifizierten Texturen erstellt wird.
Design of a Helical Keyboard
(1996)
Inspired by the cyclical nature of octaves and helical structure of a scale (Shepard, '82 and '83), we prepared a model of a piano-style keyboard (prototyped in Mathematica), which was then geometrically warped into a left-handed helical configuration, one octave/revolution, pitch mapped to height. The natural orientation of upper frequency keys higher on the helix suggests a parsimonious left-handed chirality, so that ascending notes cross in front of a typical listener left to right. Our model is being imported (via the dxf file format) into (Open Inventor/)VRML, where it can be driven by MIDI events, realtime or sequenced, which stream is both synthesized (by a Roland Sound Module), and spatialized by a heterogeneous spatial sound backend (including the Crystal River Engineering Acoustetron II and the Pioneer Sound Field Control speaker-array System), so that the sound of the respective notes is directionalized with respect to sinks, avatars of the human user, by default in the tube of the helix. This is a work-in-progress which we hope to be fully functional within the next few months.
In an information-rich Virtual Reality (VR) environment, the user is immersed in a world containing many objects providing that information. Given the finite computational resources of any computer system, optimization is required to ensure that the most important information is presented to the user as clearly as possible and in a timely fashion. In particular, what is desired are means whereby the perspicuity of an object may be enhanced when appropriate. An object becomes more perspicuous when the information it provides to the user becomes more readily apparent. Additionally, if a particular object provides high-priority information, it would be advantageous to make that object obtrusive as well as highly perspicuous. An object becomes more obtrusive if it draws attention to itself (or equivalently, if it is hard to ignore). This paper describes a technique whereby objects may dynamically adapt their representation in a user's environment according to a dynamic priority evaluation of the information each object provides. The three components of our approach are:
- an information manager that evaluates object information priority,
- an enhancement manager that tabulates rendering features associated with increasing object perspicuity and obtrusion as a function of priority, and
- a resource manager that assigns available object rendering resources according to features indicated by the enhancement manager for the priority set for each object by the information manager.
We consider resources like visual space (pixels), sound spatialization channels (mixels), MIDI/audio channels, and processing power, and discuss our approach applied to different applications. Assigned object rendering features are implemented locally at the object level (e.g., object facing the user using the billboard node in VRML 2.0) or globally, using helper applications (e.g., active spotlights, semi-automatic cameras).