Camera-based object detection is widely used in safety-critical applications such as advanced driver assistance systems (ADAS) and autonomous vehicle research. Road infrastructure has been designed for human vision, so computer vision, with RGB cameras, is a vital source of semantic information from the environment. Sensors, such as LIDAR and RADAR, are also often utilized for these applications; however, cameras provide a higher spatial resolution and color information. The spatial frequency response (SFR), or sharpness of a camera, utilized in object detection systems must be sufficient to allow a detection algorithm to localize objects in the environment over its lifetime reliably. This study explores the relationship between object detection performance and SFR. Six state-of-the-art object detection models are evaluated with varying levels of lens defocus. A novel raw image dataset is created and utilized, containing pedestrians and cars over a range of distances up to 100-m from the sensor. Object detection performance for each defocused dataset is analyzed over a range of distances to determine the minimum SFR necessary in each case. Results show that the relationship between object detection performance and lens blur is much more complex than previous studies have found due to lens field curvature, chromatic aberration, and astigmatisms. We have found that smaller objects are disproportionately impacted by lens blur, and different object detection models have differing levels of robustness to lens blur
Applicability of Aeroacoustic Scaling Laws of Leading Edge Serrations for Rotating Applications
(2020)
Poor young people more often face health difficulties, (learning) disabilities, and are overrepresented in special schools. Consequently, youth from poor households disproportionately frequently participate in disability‐specific programs aiming to improve their educational levels and labor market opportunities. They face a double burden of disability and poverty. In our study, we look at poor and non‐poor youth with disabilities (YPWD) who participate in vocational rehabilitation (VR) and whether VR helps them (a) in transitioning into employment and (b) in leaving poverty. We examine the association between the receipt of initial basic income support (BIS) as a poverty indicator, later labor market outcomes, and earned vocational qualification using administrative data. We make use of a sample of all persons accepted for VR in 2010 (N = 36,645). We employ logit models on VR attendees’ labor market outcomes three and five years after being accepted for VR as well as on their earned vocational qualifications. Beside initial poverty status, we control for educational level, type, and degree of disability and program pattern during the VR process. Our findings show that YPWD from poor households have a decreased likelihood of a vocational certificate and employment. Additionally, they are more likely to receive BIS than young people not from poor households and thus more likely to remain poor. In conclusion, VR seems to support poor YPWD less in their school‐to‐work transitions. Thus, disability‐specific programs should be more tailored to the social situations of participants, and counsellors should be more sensitive to their social backgrounds.
Magneto-hydrothermal triple-convection in a W-shaped porous cavity containing oxytactic bacteria
(2022)
Bioconvective heat and mass transport phenomena have recently been the subject of interest in diverse fields of applications pertaining to the motion of fluids and their thermophysical properties. The transport processes in a system involving triple convective phenomena, irregular geometry, and boundary conditions constitute a complex phenomenon. This work aims to explore the mixed thermo-bioconvection of magnetically susceptible fluid containing copper nanoparticles and oxytactic bacteria in a novel W-shaped porous cavity. The buoyant convention is generated due to the isothermal heating at the wavy bottom wall, whereas the mixed convection is induced due to the shearing motion of the top-cooled sliding wall. Furthermore, the bioconvection is induced due to the manifestation of oxytactic bacteria or organisms. The inclined sidewalls are insulated. The geometry is packed with water based Cu nanoparticle mixed porous structure, which is subjected to a magnetizing field acted horizontally. The complex transport equations are transformed into nondimensional forms, which are then computed using the finite volume-based developed code. The coupled triple-convective flow physics are explored for a wide range of involved controlling parameters, which could provide helpful insight to the system designer for its proper operation. The shape of geometry can be considered one of the important parameters to control the heat and mass transport phenomena. In general, the influence of amplitude (δ) is more compared to the waviness number (m) of the undulations. The magnitude of heat (Nu) and mass (Sh) transfer rate for the W-shaped cavity is high compared to conventional square and trapezoidal-shaped cavities. The output of the analysis could be very helpful for the designer for modeling devices operating on nanotechnology-based bioconvection, microbial fuel cells, and others.
A swirling pulverized coal flame is computationally investigated. A Eulerian–Lagrangian formulation is used to describe the two-phase flow. Turbulence is modelled within a RANS (Reynolds averaged numerical simulation) framework. Four turbulence viscosity- (TV) based models, namely the standard k-ε model, realizable k-ε model, renormalization group theory k-ε model, and the shear stress transport k-ω model are used. In addition, a Reynolds stress transport model (RSM) is employed. The models are assessed by comparing the predicted velocity fields with the measurements of other authors. In terms of overall average values, the agreement of the predictions to the measurements is observed to be within the range 20–40%. A better performance of the RSM compared to the TV models is observed, with a nearly twice as better overall agreement to the experiments, particularly for the swirl velocity. In the second part of the investigation, the resolution of the discrete particle phase in modelling the turbulent particle dispersion (TPD) and particle size distribution (SD) is investigated. Using the discrete random walk model for the TPD, it is shown that even five random walks are sufficient for an accuracy that is quite high, with a less than 1% mean deviation from the solution obtained by thirty random walks. The approximation of the measured SD is determined by a continuous Rosin–Rammler distribution function, and inaccuracies that can occur in its subsequent discretization are demonstrated and discussed. An investigation on the resolution of the SD by discrete particle size classes (SC) indicates that 12 SC are required for an accuracy with a less than 1% mean deviation from the solution with 18 SC. Although these numbers may not necessarily be claimed to be sufficiently universal, they may serve as guidance, at least for SD with similar characteristics
Thermoelectric generators (TEGs) have the ability to convert waste heat into electrical energy under unfavorable conditions and are becoming increasingly popular in academia, but have not yet achieved a broad commercial success, due to the still comparably low efficiency. To increase the efficiency and economic viability of TEGs, research is performed on the materials on one hand and on the system connection on the other. In the latter case, the net output power of the cooling system plays a key role. At first glance, passive cooling seems preferable to active cooling because it does not affect the net electrical output power. However, as shown in the present review, the active cooling is to be preferred for net output power. The situation is similar in air and water-cooling. Even though air-cooling is easier to set up, the water-cooling should be preferred to achieve higher net output power. It is shown that microchannel cooling has similar hydraulic performance to conventional cooling and inserts increase the net output power of TEG. As the review reveals that active water-cooling should be the method of choice to achieve high net output power, it also shows that a careful optimization is necessary to exploit the potential.
The settling velocities of helminth eggs of three types, namely Ascaris suum (ASC), Trichuris suis (TRI), and Oesophagostomum spp. (OES), in clean tap water are computationally determined by means of computational fluid dynamics, using the general-purpose CFD software ANSYS Fluent 18.0. The previous measurements of other authors are taken as the basis for the problem formulation and validation, whereby the latter is performed by comparing the predicted sink velocities with those measured in an Owen tube. To enable a computational treatment, the measured shapes of the eggs are parametrized by idealizing them in terms of elementary geometric forms. As the egg shapes show a variation within each class, “mean” shapes are considered. The sink velocities are obtained through the computationally obtained drag coefficients. The latter are defined by means of steady-state calculations. Predicted sink velocities are compared with the measured ones. It is observed that the calculated values show a better agreement with the measurements, for ASC and TRI, compared to the theoretical sink values delivered by the Stokes theory. However, the observed agreement is still found not to be very satisfactory, indicating the role of further parameters, such as the uncertainties in the characterization of egg shapes or flocculation effects even in clean tap water.
The links between innovativeness as a driver of economic performance, and the determinants of innovativeness have been investigated by management scholars and economists for decades, focusing mostly on “hard factors” as investment in research and development, or education. Focusing on a relatively neglected, but in times of globalization even more important aspect, the infuence of cultural characteristics on innovativeness, we apply diferent econometric models to test for links between cultural tightness and looseness on the one hand, and national innovativeness on the other hand. We fnd that cultural tightness—in the sense of homogenous and intolerant societies—has a negative link to national innovativeness, while cultural looseness—in the sense of tolerant and diverse societies—displays a positive link to national innovativeness.
Cell migration is associated with the dynamic protrusion of a thin actin-based cytoskeletal extension at the cell front, which has been shown to consist of two different substructures, the leading lamellipodium and the subsequent lamellum. While the formation of the lamellipodium is increasingly well understood, organizational principles underlying the emergence of the lamellum are just beginning to be unraveled. We report here on a 1D mathematical model which describes the reaction-diffusion processes of a polarized actin network in steady state, and reproduces essential characteristics of the lamellipodium-lamellum system. We observe a steep gradient in filament lengths at the protruding edge, a local depolymerization maximum a few microns behind the edge, as well as a differential dominance of the network destabilizer ADF/cofilin and the stabilizer tropomyosin. We identify simple and robust organizational principles giving rise to the derived network characteristics, uncoupled from the specifics of any molecular implementation, and thus plausibly valid across cell types. An analysis of network length dependence on physico-chemical system parameters implies that to limit array treadmilling to cellular dimensions, network growth has to be truncated by mechanisms other than aging-induced depolymerization, e.g., by myosin-associated network dissociation at the transition to the cell body. Our work contributes to the analytical understanding of the cytoskeletal extension's bisection into lamellipodium and lamellum and sheds light on how cells organize their molecular machinery to achieve motility.
To power dynamic processes in cells, the actin and microtubule cytoskeletons organize into complex structures. Although it is known that cytoskeletal coordination is vital for cell function, the mechanisms by which cross-linking proteins coordinate actin and microtubule activities remain poorly understood. In particular, it is unknown how the distinct mechanical properties of different actin architectures modulate the outcome of actin-microtubule interactions. To address this question, we engineered the protein TipAct, which links growing microtubule ends via end-binding proteins to actin filaments. We show that growing microtubules can be captured and guided by stiff actin bundles, leading to global actin-microtubule alignment. Conversely, growing microtubule ends can transport, stretch and bundle individual actin filaments, thereby globally defining actin filament organization. Our results provide a physical basis to understand actin-microtubule cross-talk, and reveal that a simple cross-linker can enable a mechanical feedback between actin and microtubule organization that is relevant to diverse biological contexts.
Mass spectrometry data is one of the key sources of information in many workflows in medicine and across the life sciences. Mass fragmentation spectra are generally considered to be characteristic signatures of the chemical compound they originate from, yet the chemical structure itself usually cannot be easily deduced from the spectrum. Often, spectral similarity measures are used as a proxy for structural similarity but this approach is strongly limited by a generally poor correlation between both metrics. Here, we propose MS2DeepScore: a novel Siamese neural network to predict the structural similarity between two chemical structures solely based on their MS/MS fragmentation spectra. Using a cleaned dataset of > 100,000 mass spectra of about 15,000 unique known compounds, we trained MS2DeepScore to predict structural similarity scores for spectrum pairs with high accuracy. In addition, sampling different model varieties through Monte-Carlo Dropout is used to further improve the predictions and assess the model's prediction uncertainty. On 3600 spectra of 500 unseen compounds, MS2DeepScore is able to identify highly-reliable structural matches and to predict Tanimoto scores for pairs of molecules based on their fragment spectra with a root mean squared error of about 0.15. Furthermore, the prediction uncertainty estimate can be used to select a subset of predictions with a root mean squared error of about 0.1. Furthermore, we demonstrate that MS2DeepScore outperforms classical spectral similarity measures in retrieving chemically related compound pairs from large mass spectral datasets, thereby illustrating its potential for spectral library matching. Finally, MS2DeepScore can also be used to create chemically meaningful mass spectral embeddings that could be used to cluster large numbers of spectra. Added to the recently introduced unsupervised Spec2Vec metric, we believe that machine learning-supported mass spectral similarity measures have great potential for a range of metabolomics data processing pipelines.
In the present contribution, the utilization of steel-mill gases for an industrial methanol synthesis process is described. The focus of this work is on the influence of syngas compositions derived from steel-mill gases on an industrial Cu/ZnO/Al2O3 catalyst. Elevated CO2 and H2O concentrations seem to have an irreversible impact on the activity of the catalyst. In order to obtain realistic gas composition for the catalyst tests, a process simulation of the methanol synthesis was conducted. The calculated gas compositions at the reactor inlet were applied in a practical test in order to evaluate the catalyst stability under steel mill gas conditions. No noticeable deactivation was observed.
Sound and music are well-studied aspects of the quality of experience in restaurants; the role of the room acoustical conditions, their influence on the visitors’ soundscape evaluation and their impact on the overall customer satisfaction in restaurants, however, has received less scientific attention. The present field study therefore investigated whether sound pressure level, reverberation time, and soundscape pleasantness can predict factors associated with overall restaurant quality. In total, 142 persons visiting 12 restaurants in Berlin rated relevant acoustical and non-acoustical factors associated with restaurant quality. Simultaneously, the A-weighted sound pressure level (LA,eq,15) was measured, and the reverberation time in the occupied state (T20,occ) was obtained by measurements performed in the unoccupied room and a subsequent calculation of the occupied condition according to DIN 18041. Results from linear mixed-effects models revealed that both the LA,eq,15 and T20,occ had a significant influence on soundscape pleasantness and eventfulness, whereby the effect of T20,occ was meditated by the LA,eq,15. Also, the LA,eq,15 as well as soundscape pleasantness were significant predictors of overall restaurant quality. A comprehensive structural equation model including both acoustical and non-acoustical factors, however, indicates that the effect of soundscape pleasantness on overall restaurant quality is mediated by the restaurant’s atmosphere. Our results support and extend previous findings which suggest that the acoustical design of restaurants involves a trade-off between comfort and liveliness, depending on the desired character of the place.