The search result changed since you submitted your search request. Documents might be displayed in a different sort order.
  • search hit 12 of 1640
Back to Result List

Evaluation of mount loads in dynamic testing of a jet engine

  • In the dynamic testing of jet engines the evaluation of loads on the mount structure is vital for comparison with finite element calculations of such testing. Measuring these loads with the help of strain gauges applied to the structure becomes difficult if the mount is overdetermined and thus not every strain gauge can be assigned to a single load direction. In this study, the overdetermined mount structure of the BR715 engine was examined at one of the three mounting points between the Boeing 717 airframe and the engine, where loads in five directions were reacted. Firstly, the dependence of five measured strains upon known static load conditions at the mounting point had to be determined. For this purpose a static calibration test was carried out where defined forces and moments in known directions were applied to the structure while the output from five strain gauges was measured accordingly. The result was the desired relationship between loads and strains in terms of a matrix,In the dynamic testing of jet engines the evaluation of loads on the mount structure is vital for comparison with finite element calculations of such testing. Measuring these loads with the help of strain gauges applied to the structure becomes difficult if the mount is overdetermined and thus not every strain gauge can be assigned to a single load direction. In this study, the overdetermined mount structure of the BR715 engine was examined at one of the three mounting points between the Boeing 717 airframe and the engine, where loads in five directions were reacted. Firstly, the dependence of five measured strains upon known static load conditions at the mounting point had to be determined. For this purpose a static calibration test was carried out where defined forces and moments in known directions were applied to the structure while the output from five strain gauges was measured accordingly. The result was the desired relationship between loads and strains in terms of a matrix, which yields the corresponding load condition of the examined mounting point if multiplied with a set of strains. The same calibration procedure was carried out with a finite element model of the mount, where direct comparison to dynamic load results from the model itself was possible. With this model the validity of the above method was shown as well as possible errors which may occur while evaluating dynamic test results. The method was found to give satisfactory results even for dynamic loading, although some inertia forces disturb the signals in dynamic testing. Finally, the results from an actual dynamic engine test were processed into loads and then compared to the simulated loads from a finite element model of the engine. Good agreement was found and the indication of any remaining discrepancies was used to update the model for an even better representation of the dynamic test loads.show moreshow less

Export metadata

Additional Services

Share in Twitter Search Google Scholar
Metadaten
Author:Matthias Neef, J. P. Fritzen, G. Schumacher
Fachbereich/Einrichtung:Hochschule Düsseldorf / Fachbereich - Maschinenbau und Verfahrenstechnik
Document Type:Article
Year of Completion:2003
Language of Publication:English
Publisher:Elsevier
Parent Title (English):Mechanical Systems and Signal Processing
Volume:17
Issue:3
First Page:665
Last Page:681
Related URL:http://www.sciencedirect.com/science/article/pii/S0888327001914050
DOI:https://doi.org/10.1006/mssp.2001.1405
Dewey Decimal Classification:6 Technik, Medizin, angewandte Wissenschaften / 62 Ingenieurwissenschaften / 620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Licence (German):keine Lizenz - nur Metadaten
Release Date:2019/12/20
Accept ✔
Diese Webseite verwendet technisch erforderliche Session-Cookies. Durch die weitere Nutzung der Webseite stimmen Sie diesem zu. Unsere Datenschutzerklärung finden Sie hier.