TY - CHAP A1 - Irrgang, Melanie A1 - Steffens, Jochen A1 - Egermann, Hauke T1 - “Shake it out” - How Motion Capture and Smartphone-Assessed Movement Can Predict Properties of Music T2 - 33. Abstract-Band zur Jahrestagung der Deutschen Gesellschaft für Musikpsychologie (DGM) Y1 - 2017 CY - Hamburg ER - TY - JOUR A1 - Marszal, Anna Joanna A1 - Heiselberg, Per A1 - Bourelle, Julien S. A1 - Musall, Eike A1 - Voss, Karsten A1 - Sartori, Igor A1 - Napolitano, Assunta T1 - Zero Energy Building - A Review of definitions and calculation methodologies JF - Energy and Buildings N2 - The concept of Zero Energy Building (ZEB) has gained wide international attention during last few years and is now seen as the future target for the design of buildings. However, before being fully implemented in the national building codes and international standards, the ZEB concept requires clear and consistent definition and a commonly agreed energy calculation methodology. The most important issues that should be given special attention before developing anewZEB definition are: (1) the metric of the balance, (2) the balancing period, (3) the type of energy use included in the balance, (4) the type of energy balance, (5) the accepted renewable energy supply options, (6) the connection to the energy infrastructure and (7) the requirements for the energy efficiency, the indoor climate and in case of gird connected ZEB for the building–grid interaction. This paper focuses on the review of the most of the existing ZEB definitions and the various approaches towards possible ZEB calculation methodologies. It presents and discusses possible answers to the abovementioned issues in order to facilitate the development of a consistent ZEB definition and a robust energy calculation methodology. KW - Label Y1 - 2011 UR - https://www.sciencedirect.com/science/article/pii/S0378778810004639 VL - 43 IS - 4 SP - 971 EP - 979 PB - Elsevier ER - TY - JOUR A1 - Tophoven, Silke A1 - Du Prel, Jean-Baptist A1 - Peter, Richard A1 - Kretschmer, Veronika T1 - Working in gender-dominated occupations and depressive symptoms JF - Journal for Labour Market Research N2 - Gender-specific differences in the frequency of depression to the disadvantage of women have been known for decades. In Germany, there is evidence that the prevalence of mental disorders also differs by occupation. The present study investigates whether for women working in male-dominated occupations and for men working in female-dominated occupations is related to depressive symptoms independently from other factors like work stress and work-family conflict. Special attention is paid to gender differences. Moreover, women are distinguished according to their working time (full-time or not). We use data from the first wave of the lidAstudy for our analyses. We make use of the applied Beck Depression Inventory, the effort-reward imbalance scales as well as the work-family conflict scale. Occupational gender segregation is defined as a share of 80 % of men and women per occupation, respectively. For women, the results of the multivariate analyses show an independent relationship between depressive symptoms and working in male-dominated occupations. Furthermore, significant interactions between occupational gender segregation and work stress are observed in both men and women regarding depressive symptoms. Y1 - 2015 UR - https://www.iab.de/389/section.aspx/Publikation/k140731303 VL - 48 IS - 3 SP - 247 EP - 262 ER - TY - JOUR A1 - Jacobs, Naomi A1 - Huldtgren, Alina T1 - Why value sensitive design needs ethical commitments JF - Ethics and Information Technology KW - Applied ethics KW - Ethical theory KW - Ethics KW - Technology KW - Value sensitive design Y1 - 2021 U6 - https://doi.org/10.1007/s10676-018-9467-3 SN - 1572-8439 VL - 23 IS - 1 SP - 23 EP - 26 PB - Springer Nature ER - TY - CHAP A1 - Deckert, Carsten T1 - Why Some Ideas Refuse to Diffuse BT - 8th Annual Conference Front End of Innovation (FEI EMEA), Munich N2 - There is a popular saying in German: Innovation is when the market shouts “Hooray!”. Thus, a new idea is only as good as its diffusion into the addressed social system. The question is what affects the adoption or rejection of a new idea. Carsten Deckert shares his experience on the main innovation resistances and on ways to increase the acceptance of new ideas. He talks about which perceived attributes of innovations are conducive to the rate of adoption of an innovation and which are characteristics of failed innovations. Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-18193 PB - KNect 365 CY - München ER - TY - CHAP A1 - Steffens, Jochen A1 - Greb, Fabian A1 - Schlotz, Wolff T1 - Why listen to music right now? – Towards an inventory measuring the functions of music listening under situational influences T2 - Proceedings of the 14th International Conference on Music Perception and Cognition (ICMPC), San Francisco (CA), USA Y1 - 2016 UR - http://www.icmpc.org/icmpc14/files/ICMPC14_Proceedings.pdf SN - 1-876346-65-5 SP - 842 CY - San Francisco, UA ER - TY - CHAP A1 - Steffens, Jochen T1 - When do we judge sounds? – Relevant everyday situations for the estimation of ecological validity of indoor soundscape experiments T2 - International Congress on Acoustics (ICA) 2013, Montréal, Canada Y1 - 2013 U6 - https://doi.org/10.1121/1.4800346 N1 - © 2013 Acoustical Society of America CY - Montréal ER - TY - CHAP A1 - Zielke, Thomas A1 - Bernst, Irina A1 - Crombach, Tobias A1 - Becker, Martin A1 - Lippel, Jens ED - Gómez Chova, Luis ED - López Martínez, A. ED - Candel Torres, I. T1 - WHAT CAN BE LEARNED BY GRADING ANALYTICS? T2 - INTED 2018: 12th International Technology, Education and Development Conference : 5-7 March, 2018, Valencia (Spain) : conference proceedings Y1 - 2018 SN - 978-84-697-9480-7 U6 - https://doi.org/10.21125/inted.2018.0593 VL - 12th International Technology, Education and Development Conference SP - 3097 EP - 3106 PB - IATED Academy CY - Valencia, Spain ER - TY - JOUR A1 - Engeldahl, Barthel A1 - Özaslan, Mehtap A1 - Marschall, Roland A1 - Rose, Marcus A1 - Kaluza, Stefan A1 - Titus, Juliane A1 - Sprung, Christoph T1 - Weimar 2015: Catalysing Tomorrow’s Solutions JF - ChemCatChem Y1 - 2015 U6 - https://doi.org/10.1002/cctc.201500435 SN - 1867-3899 VL - 7 IS - 12 SP - 1794 EP - 1796 PB - Wiley ER - TY - CHAP A1 - Askari, Sima Ipakchian A1 - Huldtgren, Alina A1 - IJsselsteijn, Wijnand ED - Bamidis, P.D. ED - Ziefle, M. ED - Maciaszek, L. T1 - Wear it or fear it: exploration of drivers & barriers in smartwatch acceptance by senior citizens T2 - Proceedings of the 4th International Conference on Information and Communication Technologies for Ageing Well and e-Health,IC T4AWE - Volume 1, 26-36, 2018, Funchal, Madeira, Portugal KW - Assistive Technology KW - Seniors KW - Smartwatches KW - Technology Acceptance KW - Wearables Y1 - 2018 SN - 978-989-758-299-8 U6 - https://doi.org/10.5220/0006673000260036 SP - 26 EP - 36 PB - SciTePress Digital Library ER - TY - JOUR A1 - Ruess, Martin A1 - Schillinger, Dominik A1 - Bazilevs, Yuri A1 - Varduhn, Vasco A1 - Rank, Ernst T1 - Weakly enforced essential boundary conditions for NURBS-embedded and trimmed NURBS geometries on the basis of the finite cell method JF - International Journal for Numerical Methods in Engineering Y1 - 2013 U6 - https://doi.org/10.1002/nme.4522 SN - 1097-0207 VL - 95 IS - 10 SP - 811 EP - 846 PB - Wiley ER - TY - JOUR A1 - Ruess, Martin A1 - Schillinger, Dominik A1 - Özcan, Ali I. A1 - Rank, Ernst T1 - Weak coupling for isogeometric analysis of non-matching and trimmed multi-patch geometries JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2014 U6 - https://doi.org/10.1016/j.cma.2013.10.009 SN - 0045-7825 VL - 269 SP - 46 EP - 71 PB - Elsevier ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - Water-Cooled Thermoelectric Generators for Improved Net Output Power: A Review JF - Energies N2 - Thermoelectric generators (TEGs) have the ability to convert waste heat into electrical energy under unfavorable conditions and are becoming increasingly popular in academia, but have not yet achieved a broad commercial success, due to the still comparably low efficiency. To increase the efficiency and economic viability of TEGs, research is performed on the materials on one hand and on the system connection on the other. In the latter case, the net output power of the cooling system plays a key role. At first glance, passive cooling seems preferable to active cooling because it does not affect the net electrical output power. However, as shown in the present review, the active cooling is to be preferred for net output power. The situation is similar in air and water-cooling. Even though air-cooling is easier to set up, the water-cooling should be preferred to achieve higher net output power. It is shown that microchannel cooling has similar hydraulic performance to conventional cooling and inserts increase the net output power of TEG. As the review reveals that active water-cooling should be the method of choice to achieve high net output power, it also shows that a careful optimization is necessary to exploit the potential. KW - Energy Engineering and Power Technology KW - Renewable Energy, Sustainability and the Environment KW - Electrical and Electronic Engineering KW - Control and Optimization KW - DOAJ Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-37323 SN - 1996-1073 VL - 14 IS - 24 PB - MDPI ER - TY - BOOK ED - Schubart, Rikke ED - Virchow, Fabian T1 - War isn't hell, it's entertainment KW - Forena Y1 - 2009 SN - 978-0786435586 PB - McFarland & Company Publ. CY - Jefferson, N.C. ER - TY - JOUR A1 - Tophoven, Silke A1 - Reims, Nancy A1 - Tisch, Anita T1 - Vocational Rehabilitation of Young Adults with Psychological Disabilities JF - Journal of Occupational Rehabilitation N2 - Objective Vocational rehabilitation measures support youth and young adults with disabilities to obtain vocational training and to enter the labor market. In Germany, a growing number of young people with psychological disabilities in vocational rehabilitation can be observed. The study at hand focuses on this group and examines their (un-)unemployment biographies before vocational rehabilitation, their access to vocational rehabilitation and identifies their individual challenges within the process of vocational rehabilitation. Methods Using a multi-methods approach, we analyze representative administrative data of the German Federal Employment Agency as well as biographical interviews conducted with young rehabilitants. We compare the population of young rehabilitants with psychological disorders to those with other disabilities in terms of vocational rehabilitation and initial labor market entry in order to get a representative picture about their school to work transitions. Since rehabilitants with psychological disabilities tend to be older than the remaining population, analyses are stratified by age groups. In addition, qualitative in-depth interviews provide an additional and deeper understanding of specific employment barriers youth with psychological disorders have to overcome. Furthermore, the individual perspective gives insight on how the crucial transition from school to work is perceived by the population under study. Results The pathway into vocational rehabilitation of youth with psychological disorders is often characterized by obstacles in their transition from school to work. During rehabilitation, it appears essential to provide psychological stabilization along with vocational training. Although their average level of education is higher than those of other rehabilitants, labor market transition after (often company-external) vocational training challenges many young people with psychological disabilities, leaving many of them with comparatively poor labor market prospects. Conclusions Young persons with psychological disabilities, who come from regular schools or dropped out from regular school or university, seem to find their way to vocational rehabilitation more indirectly. Furthermore, vocational rehabilitation itself is often prolonged for those with psychological disabilities possibly due to a corresponding stabilization process. However, vocational rehabilitation can be a core element within the stabilization process of a psychological disease. Y1 - 2019 U6 - https://doi.org/10.1007/s10926-018-9773-y VL - 29 IS - 1 SP - 150 EP - 162 PB - Springer ER - TY - JOUR A1 - Schreiber, Andreas A1 - Struminksi, Regina T1 - Visualizing the Provenance of Personal Data Using Comics JF - Computers KW - DOAJ Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-40286 SN - 2073-431X VL - 7 IS - 1 PB - MDPI ER - TY - JOUR A1 - Herder, Jens T1 - Visualization of a Clustering Algorithm of Sound Sources based on Localization Errors JF - Journal of the 3D-Forum Society N2 - A module for soundscape monitoring and visualizing resource management processes was extended for presenting clusters, generated by a novel sound source clustering algorithm. This algorithm groups multiple sound sources together into a single representative source, considering localization errors depending on listener orientation. Localization errors are visualized for each cluster using resolution cones. Visualization is done in runtime and allows understanding and evaluation of the clustering algorithm. KW - audio rendering, clustering KW - human perception KW - Resource Management KW - Sound Spatialization KW - Visualization Y1 - 1999 VL - 13 IS - 3 SP - 66 EP - 70 ER - TY - CHAP A1 - Herder, Jens T1 - Visualization of a Clustering Algorithm of Sound Sources based on Localization Errors T2 - Second International Conference on Human and Computer N2 - A module for soundscape monitoring and visualizing resource management processes was extended for presenting clusters, generated by a novel sound source clustering algorithm. This algorithm groups multiple sound sources together into a single representative source, considering localization errors depending on listener orientation. Localization errors are visualized for each cluster using resolution cones. Visualization is done in runtime and allows understanding and evaluation of the clustering algorithm. KW - audio rendering, clustering KW - human perception KW - Resource Management KW - Sound Spatialization KW - Visualization Y1 - 1999 SP - 1 EP - 5 CY - Aizu-Wakamatsu ER - TY - CHAP A1 - Myszkowski, Karol A1 - Herder, Jens A1 - Kunii, Tosiyasu L. A1 - Ibusuki, Masumi T1 - Visualization and analysis of occlusion for human jaws using a "functionally generated path" T2 - IS&T/SPIE Symp. on Electronic Imaging, Visual Data Exploration and Analysis III N2 - Dynamic characteristics of occlusion during lower jaw motion are useful in the diagnosis of jaw articulation problems and in computer-aided design/manufacture of teeth restorations. The Functionally Generated Path (FGP), produced as a surface which envelops the actual occlusal surface of the moving opponent jaw, can be used for compact representation of dynamic occlusal relations. In traditional dentistry FGP is recorded as a bite impression in a patient’s mouth. We propose an efficient computerized technique for FGP reconstruction and validate it through implementation and testing. The distance maps between occlusal surfaces of jaws, calculated for multiple projection directions and accumulated for mandibular motion, provide information for FGP computation. Rasterizing graphics hardware is used for fast calculation of the distance maps. Real-world data are used: the scanned shape of teeth and the measured motion of the lower jaw. We show applications of FGP to analysis of the occlusion relations and occlusal surface design for restorations. Y1 - 1996 U6 - https://doi.org/10.1117/12.234684 SP - 360 EP - 367 PB - The International Society for Optical Engineering CY - San Jose ER - TY - CHAP A1 - Myszkowski, Karol A1 - Okuneva, Galina A1 - Herder, Jens A1 - Kunii, Tosiyasu L. A1 - Ibusuki, Masumi ED - Earnshaw, Rae A. ED - Huw, Jones ED - John, Vince T1 - Visual Simulation of the Chewing Process for Dentistry T2 - Visualization & Modeling N2 - CAD/CAM techniques are increasingly used in dentistry for the design and fabrication of teeth estorations. Important concerns are the correction of articulation problems that existed before treatment and the prevention of treatment-generated problems. These require interactive evaluation of the occlusal surfaces of teeth during mastication. Traditional techniques based on the use of casts with mechanical articulators require manual adjustment of occlusal surfaces, which becomes impractical when hard restoration materials like porcelain are used; they are also time and labor consuming and provide little visual information. We present new visual tools and a related user interface for global articulation simulation, developed for the Intelligent Dental Care System project. The aim of the simulation is visual representation of characteristics relevant to the chewing process. The simulation is based on the construction of distance maps, which are visual representations of the distributions of the distances of points in a tooth to the opposite jaw. We use rasterizing graphics hardware for fast calculation of the distance maps. Distance maps are used for collision detection and for the derivation of various characteristics showing the distribution of load on the teeth and the chewing capability of the teeth. Such characteristics can be calculated for particular positions of the jaws; cumulative characteristics are used to describe the properties of jaw movement. This information may be used for interactive design of the occlusal surfaces of restorations and for jaw articulation diagnosis. We also demonstrate elements of a user interface that exploit metaphors familiar to dentists from everyday practice. Y1 - 1997 SN - 0-12-227738-4 SP - 419 EP - 438 PB - Academic Press CY - London ER - TY - CHAP A1 - Myszkowski, Karol A1 - Okuneva, Galina A1 - Herder, Jens A1 - Kunii, Tosiyasu L. A1 - Ibusuki, Masumi T1 - Visual Simulation of the Chewing Process for Dentistry T2 - Visualization & Modelling, International Conf., 5-7 December, 1995 N2 - CAD/CAM techniques are increasingly used in dentistry for the design and fabrication of teeth restorations. Important concerns are the correction of articulation problems that existed beforetreatment and the prevention of treatment-generated problems. These require interactive evaluation of the occlusal surfaces of teeth during mastication. Traditional techniques based on the use of casts with mechanical articulators require manual adjustment of occlusal surfaces, which becomes impractical when hard restoration materials like porcelain are used; they are also time and labor consuming and provide little visual information. We present new visual tools and a related user interface for global articulation simulation, developed for the Intelligent Dental Care System project. The aim of the simulation is visual representation of characteristics relevant to the chewing process. The simulation is based on the construction of distance maps, which are visual representations of the distributions of the distances of points in a tooth to the opposite jaw. We use rasterizing graphics hardware for fast calculation of the distance maps. Distance maps are used for collision detection and for the derivation of various characteristics showing the distribution of load on the teeth and the chewing capability of the teeth. Such characteristics can be calculated for particular positions of the jaws; cumulative characteristics are used to describe the properties of jaw movement. This information may be used for interactive design of the occlusal surfaces of restorations and for jaw articulation diagnosis. We also demonstrate elements of a user interface that exploit metaphors familiar to dentists from everyday practice. Y1 - 1995 CY - Leeds ER - TY - CHAP A1 - Ayten, Hüseyin A1 - Herder, Jens A1 - Vonolfen, Wolfgang T1 - Visual Acceptance Evaluation of Soft Shadow Algorithms for Virtual TV Studios T2 - HC '10 Proceedings of the 13th International Conference on Humans and Computers N2 - Shadows in computer graphics are an important rendering aspect for spatial objects. For realtime computer applications such as games, it is essential to represent shadows as accurate as possible. Also, various tv stations work with virtual studio systems instead of real studio sets. Especially for those systems, a realistic impression of the rendered and mixed scene is important. One challenge, hence, is the creation of a natural shadow impression. This paper presents the results of an empirical study to compare the performance and quality of different shadow mapping methods. For this test, a prototype studio renderer was developed. A percentage closer filter (pcf) with a number of specific resolutions is used to minimize the aliasing issue. More advanced algorithms which generate smooth shadows like the percentage closer soft shadow (pcss) method as well as the variance shadow maps (vsm) method are analysed. Different open source apis are used to develop the virtual studio renderer, giving the benefit of permanent enhancement. The Ogre 3D graphic engine is used to implement the rendering system, benefiting from various functions and plugins. The transmission of the tracking data is accomplished with the vrpn server/client and the Intersense api. The different shadow algorithms are compared in a virtual studio environment which also casts real shadows and thus gives a chance for a direct comparison throughout the empirical user study. The performance is measured in frames per secon KW - Virtual (TV) Studio KW - soft shadow KW - realtime rendering KW - augmented reality KW - algorithmus KW - FHD KW - experimentation KW - verification KW - VSVR Y1 - 2010 UR - https://dl.acm.org/citation.cfm?id=1994505 SP - 66 EP - 71 PB - University of Aizu Press CY - Aizu-Wakamatsu ER - TY - JOUR A1 - Gaida, Philipp A1 - Weinberg, Kerstin A1 - Jahr, Andreas T1 - Viscoelastic modelling and experimental results of a dielectric electro-active polymer diaphragm actuator JF - Proceedings in Applied Mathematics and Mechanics (PAMM) Y1 - 2014 U6 - https://doi.org/10.1002/pamm.201410225 VL - 14 IS - 1 SP - 475 EP - 476 PB - Wiley ER - TY - CHAP A1 - Deckert, Carsten A1 - Mohya, Ahmed A1 - Suntharalingam, Sujieban T1 - VIRTUAL WHITEBOARDS DIGITAL POST-ITS - INCORPORATING INTERNET-BASED TOOLS FOR IDEATION INTO ENGINEERING COURSES T2 - SEFI 2021: 49th ANNUAL CONFERENCE BERLIN, 13.09.-16.09.2021 Y1 - 2021 SP - 1370 EP - 1375 ER - TY - CHAP A1 - Thiele, Simon A1 - Meyer, Laurid A1 - Geiger, Christian A1 - Drochtert, Daniel A1 - Woldecke, Bjorn T1 - Virtual archery with tangible interaction T2 - 2013 IEEE Symposium on 3D User Interfaces (3DUI), 16.03.2013 - 17.03.201, Orlando Y1 - 2013 UR - http://ieeexplore.ieee.org/document/6550199/ SN - 978-1-4673-6098-2 U6 - https://doi.org/10.1109/3DUI.2013.6550199 SP - 67 EP - 70 PB - IEEE ER - TY - CHAP A1 - Uren, Victoria A1 - Dadzie, Aba-Sah A1 - Franz, Thomas A1 - Lanfranchi, Vita A1 - Petrelli, Daniela T1 - Views on Cross-Media Knowledge Collections T2 - MMKM Workshop: Multimedia Knowledge Management: Industry meets academia, Milton Keynes Y1 - 2007 N1 - Published: Abstract and Poster: MMKM Workshop: Multimedia Knowledge Management: Industry meets academia, Milton Keynes ER - TY - CHAP A1 - Klapdohr, Monika A1 - Wöldecke, Björn A1 - Marinos, Dionysios A1 - Herder, Jens A1 - Geiger, Christian A1 - Vonolfen, Wolfgang T1 - Vibrotactile Pitfalls: Arm Guidance for Moderators in Virtual TV Studios T2 - HC '10 Proceedings of the 13th International Conference on Humans and Computers N2 - For this study, an experimental vibrotactile feedback system was developed to help actors with the task of moving their arm to a certain place in a virtual tv studio under live conditions. Our intention is to improve interaction with virtual objects in a virtual set, which are usually not directly visible to the actor, but only on distant displays. Vibrotactile feedback might improve the appearance on tv because an actor is able to look in any desired direction (camera or virtual object) or to read text on a teleprompter while interacting with a virtual object. Visual feedback in a virtual studio lacks spatial relation to the actor, which impedes the adjustment of the desired interaction. The five tactors of the implemented system which are mounted on the tracked arm give additional information like collision, navigation and activation. The user study for the developed system shows that the duration for reaching a certain target is much longer in case no visual feedback is given, but the accuracy is similar. In this study, subjects reported that an activation signal indicating the arrival at the target of a drag & drop task was helpful. In this paper, we discuss the problems we encountered while developing such a vibrotactile display. Keeping these pitfalls in mind could lead to better feedback systems for actors in virtual studio environments. KW - vibrotactile feedback KW - Virtual (TV) Studio KW - augmented reality KW - FHD KW - VSVR Y1 - 2010 UR - https://dl.acm.org/citation.cfm?id=1994506 SP - 72 EP - 80 PB - University of Aizu Press CY - Aizu-Wakamatsu ER - TY - CHAP A1 - Tiator, Marcel A1 - Geiger, Christian A1 - Dewitz, Bastian A1 - Fischer, Ben A1 - Gerhardt, Laurin A1 - Nowottnik, David A1 - Preu, Hendrik ED - Lukosch, Stephan ED - Kunze, Kai T1 - Venga!: climbing in mixed reality T2 - Proceedings of the First Superhuman Sports Design Challenge on First International Symposium on Amplifying Capabilities and Competing in Mixed Realities - SHS '18, Delft, 02.07.2018 - 05.07.2018 Y1 - 2018 UR - http://dl.acm.org/citation.cfm?doid=3210299 SN - 9781450364072 U6 - https://doi.org/10.1145/3210299.3210308 SP - 1 EP - 8 PB - ACM Press CY - New York ER - TY - CHAP A1 - Gonner, Steffen A1 - Müller, Dennis A1 - Hold, Stephanie A1 - Meuter, Mirko A1 - Kummert, Anton T1 - Vehicle recognition and TTC estimation at night based on spotlight pairing T2 - Proceedings of the 12th International IEEE Conference on Intelligent Transportation Systems, St. Louis, MO, USA, October 3-7, 2009 Y1 - 2009 SN - 978-1-4244-5521-8 U6 - https://doi.org/10.1109/ITSC.2009.5309848 SP - 1 EP - 6 PB - IEEE CY - Piscataway, N.J. ER - TY - JOUR A1 - Guo, Yujie A1 - Heller, Jason A1 - Hughes, Thomas J.R. A1 - Ruess, Martin A1 - Schillinger, Dominik T1 - Variationally consistent isogeometric analysis of trimmed thin shells at finite deformations, based on the STEP exchange format JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2018 U6 - https://doi.org/10.1016/j.cma.2018.02.027 SN - 0045-7825 N1 - Open Manuscript https://www.sciencedirect.com/science/article/am/pii/S0045782518301075 VL - 336 SP - 39 EP - 79 PB - Elsevier ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Özman, Cansu A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - Variable temperature effects on TEG performance JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27893 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Dehmer, Joanna A1 - Niemann, Jörg T1 - Value Chain Management Through Cloud-based Platforms JF - Procedia - Social and Behavioral Sciences Y1 - 2018 U6 - https://doi.org/10.1016/j.sbspro.2018.03.021 N1 - PII: S1877042818300211 VL - 238 SP - 177 EP - 181 PB - Elsevier ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Gül, Fethi A1 - Assmann, Alexander A1 - Akhyari, Payam A1 - Lichtenberg, Artur A1 - Joos, Franz T1 - Validation of loss-coefficient-based outlet boundary conditions for simulating aortic flow JF - Journal of Mechanics in Medicine and Biology Y1 - 2016 U6 - https://doi.org/10.1142/s0219519416500111 VL - 16 IS - 2 PB - World Scientific ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn T1 - Validation of Combustion Models for Lifted Hydrogen Flame JF - E3S Web of Conferences Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27815 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Saeedrashed, Younis Saida A1 - Benim, Ali Cemal T1 - Validation Methods of Geometric 3D-CityGML Data for Urban Wind Simulations JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27906 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - CHAP A1 - Tiator, Marcel A1 - Kerkmann, Anna Maria A1 - Geiger, Christian A1 - Grimm, Paul T1 - Using Semantic Segmentation to Assist the Creation of Interactive VR Applications T2 - 2020 IEEE International Conference on Artificial Intelligence and Virtual Reality (AIVR), Utrecht, 14.12.2020 - 18.12.2020 Y1 - 2020 UR - https://doi.org/10.1109/AIVR50618.2020.00011 SN - 978-1-7281-7463-1 U6 - https://doi.org/10.1109/AIVR50618.2020.00011 SP - 1 EP - 9 PB - IEEE ER - TY - CHAP A1 - Beckers, Kristian A1 - Faßbender, Stephan A1 - Heisel, Maritta A1 - Schmidt, Holger T1 - Using Security Requirements Engineering Approaches to Support ISO 27001 Information Security Management Systems Development and Documentation T2 - 2012 Seventh International Conference on Availability, Reliability and Security N2 - An ISO 27001 compliant information security management system is difficult to create, due to the the limited support for system development and documentation provided in the standard. We present a structured analysis of the documentation and development requirements in the ISO 27001 standard. Moreover, we investigate to what extent existing security requirements engineering approaches fulfill these requirements. We developed relations between these approaches and the ISO 27001 standard using a conceptual framework originally developed for comparing security requirements engineering methods. The relations include comparisons of important terms, techniques, and documentation artifacts. In addition, we show practical applications of our results. Y1 - 2012 UR - https://ieeexplore.ieee.org/document/6329189 SN - 978-1-4673-2244-7 U6 - https://doi.org/10.1109/ARES.2012.35 SP - 242 EP - 248 PB - IEEE CY - Prague ER - TY - CHAP A1 - Voigt, Christian A1 - Kieslinger, Barbara A1 - Schäfer, Teresa ED - Meiselwitz, Gabriele T1 - User Experiences Around Sentiment Analyses, Facilitating Workplace Learning T2 - Social Computing and Social Media. Applications and Analytics Y1 - 2017 SN - 978-3-319-58561-1 U6 - https://doi.org/10.1007/978-3-319-58562-8_24 VL - Lecture Notes in Computer Science: 10283 SP - 312 EP - 324 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Herder, Jens A1 - Wörzberger, Ralf A1 - Twelker, Uwe A1 - Albertz, Stefan T1 - Use of Virtual Environments in the Promotion and Evaluation of Architectural Designs JF - Journal of the 3D-Forum Society N2 - Virtual environments can create a realistic impression of an architectural space during the architectural design process, providing a powerful tool for evaluation and promotion during a project’s early stages. In comparison to pre-rendered animations, such as walkthroughs based on CAD models, virtual environments can offer intuitive interaction and a more life like experience. Advanced virtual environments allow users to change realtime rendering features with a few manipulations, switching between different versions while still maintaining sensory immersion. This paper reports on an experimental project in which architectural models are being integrated into interactive virtual environments, and includes demonstrations of both the possibilities and limitations of such applications in evaluating, presenting and promoting architectural designs. KW - virtual environments KW - architectural design KW - interactive walkthrough KW - design review KW - VSVR Y1 - 2002 VL - 16 IS - 4 SP - 117 EP - 122 ER - TY - JOUR A1 - Tiator, Marcel A1 - Kerkmann, Anna Maria A1 - Geiger, Christian A1 - Grimm, Paul T1 - US2RO: Union of Superpoints to Recognize Objects JF - International Journal of Semantic Computing KW - MIREVI Y1 - 2021 U6 - https://doi.org/10.1142/S1793351X21400146 SN - 1793-351X VL - 15 IS - 04 SP - 513 EP - 537 PB - World Scientific Publishing ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Nahavandi, A. A1 - Syed, K. J. T1 - URANS and LES analysis of turbulent swirling flows JF - Progress in Computational Fluid Dynamics, An International Journal Y1 - 2005 U6 - https://doi.org/10.1504/pcfd.2005.007680 VL - 5 IS - 8 PB - inderscience ER - TY - JOUR A1 - Schulzke, Tim A1 - Conrad, Stefan A1 - Kaluza, Stefan A1 - van Loo, Tom T1 - Upgrading of fast pyrolysis condensates via esterification with higher alcohols JF - Biomass and Bioenergy Y1 - 2017 U6 - https://doi.org/10.1016/j.biombioe.2017.05.010 SN - 0961-9534 N1 - Postprint ist veröffentlicht unter: http://publica.fraunhofer.de/dokumente/N-446003.html VL - 103 SP - 11 EP - 20 PB - Elsevier ER - TY - CHAP A1 - Ladwig, Philipp A1 - Pech, Alexander A1 - Dorner, Ralf A1 - Geiger, Christian T1 - Unmasking Communication Partners: A Low-Cost AI Solution for Digitally Removing Head-Mounted Displays in VR-Based Telepresence T2 - 2020 IEEE International Conference on Artificial Intelligence and Virtual Reality (AIVR), Utrecht, 14.12.2020 - 18.12.2020 KW - Mirevi Y1 - 2020 UR - https://doi.org/10.1109/AIVR50618.2020.00025 SN - 978-1-7281-7463-1 U6 - https://doi.org/10.1109/AIVR50618.2020.00025 SP - 82 EP - 90 PB - IEEE ER - TY - CHAP A1 - Franz, Thomas A1 - Dellschaft, Klaas A1 - Staab, Steffen ED - Domingue, John ED - Fensel, Dieter ED - Traverso, Paolo T1 - Unlock Your Data: The Case of MyTag T2 - Future Internet – FIS 2008: First Future Internet Symposium, FIS 2008 Vienna, Austria, September 29-30, 2008. Revised Selected Papers Y1 - 2009 UR - http://www.thomas-franz.de/publications/fis-mytag.pdf U6 - https://doi.org/10.1007/978-3-642-00985-3_10 VL - Lecture Notes in Computer Science, 5468 SP - 117 EP - 129 PB - Springer CY - Berlin, Heidelberg ER - TY - JOUR A1 - Bittremieux, Wout A1 - Levitsky, Lev A1 - Pilz, Matteo A1 - Sachsenberg, Timo A1 - Huber, Florian A1 - Wang, Mingxun A1 - Dorrestein, Pieter C. T1 - Unified and Standardized Mass Spectrometry Data Processing in Python Using spectrum_utils JF - Journal of proteome research KW - proteomics KW - mass spectrometry KW - metabolomics KW - Python KW - open source Y1 - 2023 U6 - https://doi.org/10.1021/acs.jproteome.2c00632 SN - 1535-3893 N1 - Eingereichte Version ist online verfügbar (Open Access Grün) unter: https://www.biorxiv.org/content/10.1101/2022.10.04.510894v1 VL - 22 IS - 2 SP - 625 EP - 631 PB - American Chemical Society (ACS) ER - TY - CHAP A1 - Musall, Eike T1 - Understanding Net ZEB - Overview of existing definitions in EU/Europe T2 - Towards Net Zero Energy Buildings Conference, Kopenhagen Y1 - 2012 CY - Kopenhagen ER - TY - JOUR A1 - Greb, Fabian A1 - Steffens, Jochen A1 - Schlotz, Wolff T1 - Understanding music-selection behavior via statistical learning JF - Music & Science KW - daily life KW - lasso regression KW - music listening behavior KW - music selection behavior KW - percentile-lasso KW - situational influences KW - Statistical learning Y1 - 2018 U6 - https://doi.org/10.1177/2059204318755950 VL - 1 IS - 2 SP - 1 EP - 17 PB - Sage ER - TY - JOUR A1 - Wille, Hagen A1 - Ruess, Martin A1 - Rank, Ernst A1 - Yosibash, Zohar T1 - Uncertainty quantification for personalized analyses of human proximal femurs JF - Journal of Biomechanics N2 - Computational models for the personalized analysis of human femurs contain uncertainties in bone material properties and loads, which affect the simulation results. To quantify the influence we developed a probabilistic framework based on polynomial chaos (PC) that propagates stochastic input variables through any computational model. We considered a stochastic E-ρ relationship and a stochastic hip contact force, representing realistic variability of experimental data. Their influence on the prediction of principal strains (ϵ1 and ϵ3) was quantified for one human proximal femur, including sensitivity and reliability analysis. Large variabilities in the principal strain predictions were found in the cortical shell of the femoral neck, with coefficients of variation of ≈40%. Between 60 and 80% of the variance in ϵ1 and ϵ3 are attributable to the uncertainty in the E-ρ relationship, while ≈10% are caused by the load magnitude and 5-30% by the load direction. Principal strain directions were unaffected by material and loading uncertainties. The antero-superior and medial inferior sides of the neck exhibited the largest probabilities for tensile and compression failure, however all were very small (pf<0.001). In summary, uncertainty quantification with PC has been demonstrated to efficiently and accurately describe the influence of very different stochastic inputs, which increases the credibility and explanatory power of personalized analyses of human proximal femurs. Y1 - 2016 UR - http://www.ncbi.nlm.nih.gov/pubmed/26873282 U6 - https://doi.org/10.1016/j.jbiomech.2015.11.013 SN - 0021-9290 VL - 49 IS - 4 SP - 520 EP - 527 PB - Elsevier ER - TY - RPRT A1 - Schmidt, Holger A1 - Jürjens, Jan T1 - UMLsec4UML2 - Adopting UMLsec to Support UML2 T2 - LS 14 Software Engineering mit dem Schwerpunkt Entwicklung evolutionsfähiger Software und Systeme N2 - In this paper, we present an approach to adopt UMLsec, which is defined for UML 1.5, to support the current UML version 2.3. The new profile UMLsec4UML2 is technically constructed as a UML profile diagram, which is equipped with a number of integrity conditions expressed using OCL. Consequently, the UMLsec4UML2-profile can be loaded in any Eclipse-based EMF- and MDT-compatible UML editing tool to develop and analyze different kinds of security models. The OCL constraints replace the static checks of the tool support for the old UMLsec defined for UML 1.5. Thus, the UMLsec4UML2-profile not only provides the whole expresiveness of UML2.3 for security modeling, it also brings considerably more freedom in selecting a basic UML editing tool, and it integrates modeling and analyzing security models. Since UML2.3 comprises new diagram types, as well as new model elements and new semantics of diagram types already contained in UML1.5, we consider a number of these changes in detail. More specifically, we consider composite structure and sequence diagrams with respect to modeling security properties according to the original version of UMLsec. The goal is to use UMLsec4UML2 to specify architectural security patterns. KW - UMLsec KW - UML2 KW - OCL KW - security architecture KW - security pattern Y1 - 2011 UR - https://eldorado.tu-dortmund.de/handle/2003/27602?locale=de U6 - https://doi.org/10.17877/DE290R-990 N1 - Der Bericht kann über die angebenen URL aufgerufen werden. PB - Technische Hochschule Dortmund CY - Dortmund ER - TY - CHAP A1 - Côté, Isabelle A1 - Heisel, Maritta A1 - Schmidt, Holger A1 - Hatebur, Denis T1 - UML4PF — A tool for problem-oriented requirements analysis T2 - 2011 IEEE 19th International Requirements Engineering Conference N2 - We present UML4PF, a tool for requirements analysis based on problem frames. It consists of a UML profile and an Eclipse-Plugin to model and analyze problem diagrams, derive specifications, and develop architectures. KW - Unified modeling language KW - problem frames KW - tool support KW - programming KW - generators Y1 - 2011 UR - https://ieeexplore.ieee.org/document/6051670 SN - 978-1-4577-0924-1 U6 - https://doi.org/10.1109/RE.2011.6051670 N1 - Sie haben Zugriff auf den Volltext innerhalb des HSD Campus. SP - 349 EP - 350 PB - IEEE CY - Trento ER - TY - JOUR A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal T1 - Turbulent Heat Transfer Over a Moving Surface Due to Impinging Slot Jets JF - Journal of Heat Transfer Y1 - 2011 U6 - https://doi.org/10.1115/1.4004075 VL - 133 IS - 10 PB - ASME ER - TY - CHAP A1 - Geiger, Christian A1 - Rattay, Oliver T1 - TubeMouse - A Two-Handed Input Device for Flexible Objects T2 - 2008 IEEE Symposium on 3D User Interfaces, 08.03.2008 - 09.03.2008, Reno Y1 - 2008 UR - http://ieeexplore.ieee.org/document/4476587/ SN - 978-1-4244-2047-6 U6 - https://doi.org/10.1109/3DUI.2008.4476587 SP - 27 EP - 34 PB - IEEE ER - TY - CHAP A1 - Franz, Thomas A1 - Schultz, Antje A1 - Sizov, Sergej A1 - Staab, Steffen ED - Hutchison, David ED - Kanade, Takeo ED - Kittler, Josef ED - Kleinberg, Jon M. ED - Mattern, Friedemann ED - Mitchell, John C. ED - Naor, Moni ED - Nierstrasz, Oscar ED - Pandu Rangan, C. ED - Steffen, Bernhard ED - Sudan, Madhu ED - Terzopoulos, Demetri ED - Tygar, Doug ED - Vardi, Moshe Y. ED - Weikum, Gerhard ED - Bernstein, Abraham ED - Karger, David R. ED - Heath, Tom ED - Feigenbaum, Lee ED - Maynard, Diana ED - Motta, Enrico ED - Thirunarayan, Krishnaprasad T1 - TripleRank: Ranking Semantic Web Data by Tensor Decomposition T2 - The Semantic Web - ISWC 2009: 8th International Semantic Web Conference, ISWC 2009, Chantilly, VA, USA, October 25-29, 2009. Proceedings Y1 - 2009 UR - http://www.thomas-franz.de/publications/triplerank-iswc.pdf U6 - https://doi.org/10.1007/978-3-642-04930-9_14 VL - Lecture Notes in Computer Science, 5823 SP - 213 EP - 228 PB - Springer CY - Berlin, Heidelberg ER - TY - JOUR A1 - Steffens, Jochen A1 - Guastavino, Catherine T1 - Trend Effects of Momentary and Retrospective Soundscape Evaluations JF - Acta Acustica united with Acustica KW - Habilitation KW - HB KW - ICA2019 KW - JASA2019 Y1 - 2015 VL - 101 SP - 713 EP - 722 PB - Hirzel ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Gobinda Das, Sampad A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal A1 - Moghimi, M. A. T1 - Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Microchannel under Pulsating Inlet Flow Condition JF - E3S Web of Conferences Y1 - 2019 U6 - https://doi.org/10.1051/e3sconf/201912801011 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Das, Sampad Gobinda A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal T1 - Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Microchannel under Pulsating Inlet Flow Condition JF - Heat Transfer Engineering Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27697 SP - 1 EP - 14 PB - Taylor & Francis ER - TY - JOUR A1 - Deckert, Carsten A1 - Görs, Nadine T1 - Transport carbon footprint in the german courier, express and parcel industry (CEP industry) JF - Sustainability Management Forum | NachhaltigkeitsManagementForum Y1 - 2019 U6 - https://doi.org/10.1007/s00550-018-0471-1 VL - 27 IS - 1 SP - 23 EP - 30 PB - Springer ER - TY - CHAP A1 - Tiator, Marcel A1 - Köse, Okan A1 - Wiche, Roman A1 - Geiger, Christian A1 - Dorn, Fritz ED - Chisik, Yoram ED - Holopainen, Jussi ED - Khaled, Rilla ED - Luis Silva, José ED - Alexandra Silva, Paula T1 - Trampoline Jumping with a Head-Mounted Display in Virtual Reality Entertainment T2 - Intelligent Technologies for Interactive Entertainment: INTETAIN 2017, Funchal, Portugal, June 20-22, 2017, Proceedings Y1 - 2018 UR - https://doi.org/10.1007/978-3-319-73062-2_8 SN - 978-3-319-73061-5 U6 - https://doi.org/10.1007/978-3-319-73062-2_8 SP - 105 EP - 119 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Huldtgren, Alina A1 - Mayer, Christian A1 - Kierepka, Oliver A1 - Geiger, Christian ED - Chisik, Yoram T1 - Towards serendipitous urban encounters with SoundtrackOfYourLife T2 - Proceedings of the 11th Conference on Advances in Computer Entertainment Technology, Funchal, 11.11.2014-14.11.2014 Y1 - 2014 UR - https://dl.acm.org/doi/proceedings/10.1145/2663806 SN - 9781450329453 U6 - https://doi.org/10.1145/2663806.2663836 SP - 1 EP - 8 PB - ACM CY - New York ER - TY - CHAP A1 - Ladwig, Philipp A1 - Herder, Jens A1 - Geiger, Christian T1 - Towards Precise, Fast and Comfortable Immersive Polygon Mesh Modelling: Capitalising the Results of Past Research and Analysing the Needs of Professionals T2 - ICAT-EGVE 2017 - International Conference on Artificial Reality and Telexistence and Eurographics Symposium on Virtual Environments N2 - More than three decades of ongoing research in immersive modelling has revealed many advantages of creating objects in virtual environments. Even though there are many benefits, the potential of immersive modelling has only been partly exploited due to unresolved problems such as ergonomic problems, numerous challenges with user interaction and the inability to perform exact, fast and progressive refinements. This paper explores past research, shows alternative approaches and proposes novel interaction tools for pending problems. An immersive modelling application for polygon meshes is created from scratch and tested by professional users of desktop modelling tools, such as Autodesk Maya, in order to assess the efficiency, comfort and speed of the proposed application with direct comparison to professional desktop modelling tools. KW - Human-centered computing KW - Virtual reality KW - Interaction techniques KW - Interaction design process and methods KW - Information systems Y1 - 2017 UR - http://vsvr.medien.hs-duesseldorf.de/publications/egve2017-mod-abstract.html U6 - https://doi.org/10.2312/egve.20171360 SP - 22 EP - 24 PB - The Eurographics Association ER - TY - RPRT A1 - Hermelink, Andreas A1 - Schimschar, Sven A1 - Boermans, Thomas A1 - Pagliano, Lorenzo A1 - Zangheri, Paolo A1 - Armani, Roberto A1 - Voss, Karsten A1 - Musall, Eike ED - Ecofys by order of European Commission, T1 - Towards nearly zero-energy buildings KW - Definitionsbeschreibung KW - Eigene Methodik Y1 - 2013 UR - https://ec.europa.eu/energy/sites/ener/files/documents/nzeb_full_report.pdf PB - Europäische Kommission CY - Köln ER - TY - JOUR A1 - Haberfehlner, Helga A1 - van de Ven, Shankara S. A1 - van der Burg, Sven A. A1 - Huber, Florian A1 - Georgievska, Sonja A1 - Aleo, Ignazio A1 - Harlaar, Jaap A1 - Bonouvrié, Laura A. A1 - van der Krogt, Marjolein M. A1 - Buizer, Annemieke I. T1 - Towards automated video-based assessment of dystonia in dyskinetic cerebral palsy: A novel approach using markerless motion tracking and machine learning JF - Frontiers in Robotics and AI Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-40592 SN - 2296-9144 VL - 10 PB - Frontiers ER - TY - CHAP A1 - Christmann, Simon A1 - Busboom, Imke A1 - Feige, Volker K.S. A1 - Haehnel, Hartmut T1 - Towards Automated Quality Inspection Using a Semi-Mobile Robotized Terahertz System T2 - 2020 Third International Workshop on Mobile Terahertz Systems (IWMTS) KW - angle compensation KW - automatic alignment KW - Projekt Smart Production KW - robot KW - terahertz time-domain spectroscopy KW - thickness measurements Y1 - 2020 SN - 978-1-7281-5598-2 U6 - https://doi.org/10.1109/IWMTS49292.2020.9166259 SP - 1 EP - 5 PB - IEEE CY - Essen ER - TY - CHAP A1 - Unterfrauner, Elisabeth A1 - Voigt, Christian A1 - Schön, Sandra ED - Di Mascio, Tania ED - Vittorini, Pierpaolo ED - Gennari, Rosella ED - de La Prieta, Fernando ED - Rodríguez, Sara ED - Temperini, Marco ED - Azambuja Silveira, Ricardo ED - Popescu, Elvira ED - Lancia, Loreto T1 - Towards a Model of Early Entrepreneurial Education: Appreciation, Facilitation and Evaluation T2 - Methodologies and Intelligent Systems for Technology Enhanced Learning, 8th International Conference Y1 - 2019 SN - 978-3-319-98871-9 U6 - https://doi.org/10.1007/978-3-319-98872-6_17 VL - Advances in Intelligent Systems and Computing: 804 SP - 139 EP - 146 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Herzog, Martin A1 - Lepa, Steffen A1 - Egermann, Hauke A1 - Schoenrock, Andreas A1 - Steffens, Jochen T1 - Towards a common terminology for music branding campaigns JF - Journal of Marketing Management KW - brand identity KW - brand value KW - Music branding KW - Music Branding Expert Terminology (MBET) KW - musical congruity KW - musical meaning Y1 - 2020 U6 - https://doi.org/10.1080/0267257X.2020.1713856 N1 - Das Preprint (Accepted Version) ist online verfügbar: https://eprints.whiterose.ac.uk/155624/ (Green Open Access) VL - 36 IS - 1-2 SP - 176 EP - 209 PB - Taylor & Francis ER - TY - CHAP A1 - Schwittek, Widura A1 - Schmidt, Holger A1 - Eicker, Stefan A1 - Heisel, Maritta ED - Filipe, Joaquim ED - Liu, Kecheng T1 - Towards a Common Body of Knowledge for Engineering Secure Software and Services T2 - Proceedings of the International Conference on Knowledge Management and Information Sharing N2 - Interdisciplinary communities involve people and knowledge from different disciplines in addressing a common challenge. Differing perspectives, processes, methods, tools, vocabularies, and standards are problems that arise in this context. We present an approach to support bringing together disciplines based on a common body of knowledge (CBK), in which knowledge from different disciplines is collected, integrated, and structured. The novelty of our approach is twofold: first, it introduces a CBK ontology, which allows one to semantically enrich contents in order to be able to query the CBK in a more elaborate way afterwards. Second, it heavily relies on user participation in building up a CBK, making use of the Semantic MediaWiki as a platform to support collaborative writing. The CBK ontology is backed by a conceptual framework, consisting of concepts to structure the knowledge, to provide access options to it, and to build up a common terminology. To ensure a high quality of the provided contents and to sustain the community’s commitment, we further present organizational means as part of our approach. We demonstrate our work using the example of a Network of Excellence EU project, which aims at bringing together researchers and practitioners from services computing, security and software engineering. KW - common body of knowledge KW - knowledge management KW - software engineering KW - security engineering KW - services computing Y1 - 2011 SP - 369 EP - 374 PB - SciTePress - Science and Technology Publications CY - Paris ER - TY - CHAP A1 - Brosda, Constantin A1 - Daemen, Jeff A1 - Djuderija, Sascha A1 - Joeres, Stephan A1 - Langer, Oleg A1 - Schweitzer, Andre A1 - Wilhelm, Andreas A1 - Herder, Jens T1 - TouchPlanVS Lite - A Tablet-based Tangible Multitouch Planning System for Virtual TV Studio Productions T2 - Proceedings of the 2012 Joint International Conference on Human-Centered Computer Environments N2 - This paper presents a mobile approach of integrating tangible user feedback in today’s virtual TV studio productions. We describe a tangible multitouch planning system, enabling a single user to prepare and customize scene flow and settings. Users can view and interact with virtual objects by using a tangible user interface on a capacitive multitouch surface. In a 2D setting created TV scenes are simultaneously rendered as separate view using a production/target renderer in 3D. Thereby the user experiences a closer reproduction of a final production and set assets can be reused. Subsequently, a user can arrange scenes on a timeline while maintaining different versions/sequences. The system consists of a tablet and a workstation, which does all application processing and rendering. The tablet is just an interface connected via wireless LAN. KW - virtual studio KW - planning tools KW - tangibles KW - capacitive touch screens KW - application streaming KW - VSVR KW - Virtual (TV) Studio Y1 - 2012 UR - https://dl.acm.org/citation.cfm?doid=2160749.2160764 SN - 978-1-4503-1191-5 SP - 64 EP - 67 PB - ACM CY - New York ER - TY - CHAP A1 - Herder, Jens A1 - Brosda, Constantin A1 - Djuderija, Sascha A1 - Drochtert, Daniel A1 - Genc, Ömer A1 - Joeres, Stephan A1 - Kellerberg, Patrick A1 - Looschen, Simon A1 - Geiger, Christian A1 - Wöldecke, Björn T1 - TouchPlanVS - A Tangible Multitouch Planning System for Virtual TV Studio Productions T2 - 2011 IEEE Symposium on 3D User Interfaces (3DUI) N2 - This article presents a new approach of integrating tangible user feedback in todays virtual TV studio productions. We describe a tangible multitouch planning system, enabling multiple users to prepare and customize scene flow and settings. Users can collaboratively view and interact with virtual objects by using a tangible user interface on a shared multitouch surface. The in a 2D setting created TV scenes are simultaneously rendered on an external monitor, using a production/target renderer in 3D. Thereby the user experiences a closer reproduction of a final production. Subsequently, users are able to join together the scenes into one complex plot. Within the developing process, a video prototype of the system shows the user interaction and enables early reviews and evaluations. The requirement analysis is based on expert interviews. KW - augmented KW - virtual realities KW - multimedia information systems KW - FHD KW - VSVR KW - Virtual (TV) Studio Y1 - 2011 UR - https://ieeexplore.ieee.org/document/5759226 SN - 978-1-4577-0064-4 U6 - https://doi.org/10.1109/3DUI.2011.5759226 SP - 103 EP - 104 PB - IEEE CY - Singapore ER - TY - CHAP A1 - Herder, Jens T1 - Tools and widgets for spatial sound authoring T2 - CompuGraphics ' 97, Sixth International Conference on Computational Graphics and Visualization Techniques: Graphics in the Internet Age, Vilamoura, Portugal N2 - Broader use of virtual reality environments and sophisticated animations spawn a need for spatial sound. Until now, spatial sound design has been based very much on experience and trial and error. Most effects are hand-crafted, because good design tools for spatial sound do not exist. This paper discusses spatial sound authoring and its applications, including shared virtual reality environments based on VRML. New utilities introduced by this research are an inspector for sound sources, an interactive resource manager, and a visual soundscape manipulator. The tools are part of a sound spatialization framework and allow a designer/author of multimedia content to monitor and debug sound events. Resource constraints like limited sound spatialization channels can also be simulated. KW - spatial sound KW - virtual reality environments KW - multimedia KW - spatialization KW - spatial media KW - vizualization KW - user interface design KW - man-machine interfaces Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-896 UR - http://vsvr.medien.hs-duesseldorf.de/publications/cg97-tawfssa/welcome.html SN - 972-8342-02-0 N1 - Zugriff auf die Konferenzveröffentlichung über den angegebene URL conference paper available via URL SP - 87 EP - 95 CY - Portugal ER - TY - JOUR A1 - Herder, Jens T1 - Tools and Widgets for Spatial Sound Authoring JF - Computer Networks & ISDN Systems Y1 - 1998 VL - 30 IS - 20-21 SP - 1933 EP - 1940 PB - Elsevier ER - TY - CHAP A1 - Niemann, Jörg A1 - Fussenecker, Claudia A1 - Schlösser, Martin ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Toolbox of Methods for the Digital Business Transformation T2 - Systems, Software and Services Process Improvement KW - FBMV Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_59 SP - 783 EP - 793 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Fomin, A. A1 - Dvornikov, L. A1 - Paramonov, M. A1 - Jahr, Andreas T1 - To the theory of mechanisms subfamilies JF - IOP Conference Series: Materials Science and Engineering Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-28062 VL - 124 PB - IOP Publishing ER - TY - CHAP A1 - Müller, Dennis A1 - Pauli, Josef A1 - Nunn, Christian A1 - Gormer, Steffen A1 - Müller-Schneiders, Stefan T1 - Time to contact estimation using interest points T2 - Proceedings of the 12th International IEEE Conference on Intelligent Transportation Systems, St. Louis, MO, USA, October 3-7, 2009 Y1 - 2009 SN - 978-1-4244-5521-8 U6 - https://doi.org/10.1109/ITSC.2009.5309851 SP - 1 EP - 6 PB - IEEE CY - Piscataway, N.J. ER - TY - CHAP A1 - Schmidt, Holger T1 - Threat- and Risk-Analysis During Early Security Requirements Engineering T2 - 2010 International Conference on Availability, Reliability and Security N2 - We present a threat and risk-driven methodology to security requirements engineering. Our approach has a strong focus on gathering, modeling, and analyzing the environment in which a secure ICT-system to be built is located. The knowledge about the environment comprises threat and risk models. This security-relevant knowledge is used to assess the adequacy of security mechanisms, which are selected to establish security requirements. KW - risk analysis KW - data security KW - security requirements engineering KW - software engineering Y1 - 2010 UR - https://ieeexplore.ieee.org/document/5438095 SN - 978-1-4244-5880-6 U6 - https://doi.org/10.1109/ARES.2010.14 SP - 188 EP - 195 PB - IEEE CY - Krakow ER - TY - JOUR A1 - Schmidt, Holger T1 - Threat and Risk-Driven Security Requirements Engineering JF - International Journal of Mobile Computing and Multimedia Communications N2 - In this paper, the author aim to present a threat and risk-driven methodology to security requirements engineering. The chosen approach has a strong focus on gathering, modeling, and analyzing the environment in which a secure ICT-system to be built is located. The knowledge about the environment comprises threat and risk models. As presented in the paper, this security-relevant knowledge is used to assess the adequacy of security mechanisms, which are then selected to establish security requirements. KW - security KW - security engineering Y1 - 2011 U6 - https://doi.org/10.4018/jmcmc.2011010103 SN - 1937-9412 VL - 3 IS - 1 SP - 35 EP - 50 PB - IGI Global ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Benim, Ali Cemal A1 - Pathak, Manabendra A1 - Chamoli, Sunil A1 - Gupta, Ashutosh T1 - Thermohydraulic characteristics of inline and staggered angular cut baffle inserts in the turbulent flow regime JF - Journal of Thermal Analysis and Calorimetry Y1 - 2020 U6 - https://doi.org/10.1007/s10973-019-09094-8 SN - 1388-6150 VL - 140 IS - 3 SP - 1519 EP - 1536 PB - Springer Nature ER - TY - CHAP A1 - Dubberke, Frithjof A1 - Priebe, Klaus-Peter A1 - Vrabec, Jadran A1 - Neef, Matthias A1 - Rödder, Maximilian T1 - Thermodynamic simulation and experimental validation of a cascaded two-stage organic Rankine cycle T2 - ASME ORC 2015, Brussels KW - simulation Y1 - 2015 CY - Brussels ER - TY - CHAP A1 - Franz, Thomas A1 - Staab, Steffen A1 - Arndt, Richard ED - Sleeman, Derek ED - Barker, Ken T1 - The X-COSIM integration framework for a seamless semantic desktop T2 - Proceedings of the 4th international conference on Knowledge capture Y1 - 2007 SN - 978-1-59593-643-1 U6 - https://doi.org/10.1145/1298406.1298433 N1 - Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. To copy otherwise, to republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee PB - ACM CY - New York, NY ER - TY - JOUR A1 - Niemann, Joerg A1 - Fussenecker, Claudia A1 - Schloesser, Martin A1 - Ocakci, Elif T1 - THE WORKERS PERSPECTIVE - EYE TRACKING IN PRODUCTION ENVIRONMENTS JF - ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING Y1 - 2021 SN - 1221-5872 VL - 64 IS - 1 SP - 7 EP - 14 PB - Technical University of Cluj-Napoca ER - TY - JOUR A1 - Eilert, Eva A1 - Hollenberg, Cornelis P. A1 - Piontek, Michael A1 - Suckow, Manfred T1 - The use of highly expressed FTH1 as carrier protein for cytosolic targeting in Hansenula polymorpha JF - Journal of biotechnology N2 - The iron storage protein ferritin is a member of the non-heme iron protein family. It can store and release iron, therefore it prevents the cell from damage caused by iron-dioxygen reactions as well as it provides iron for biological processing. To study whether the human ferritin heavy chain (FTH1) can be expressed in Hansenula polymorpha, we integrated an expression cassette for FTH1 and analyzed the protein expression. We found very efficient expression of FTH1 and obtained yields up to 1.9 g/L under non-optimized conditions. Based on this result we designed a FTH1-PTH fusion protein to successfully express the parathyroid hormone fragment 1-34 (PTH) for the first time intracellular in H. polymorpha. Y1 - 2012 UR - http://www.ncbi.nlm.nih.gov/pubmed/22212821 U6 - https://doi.org/10.1016/j.jbiotec.2011.12.014 VL - 159 IS - 3 SP - 172 EP - 176 PB - Elsevier ER - TY - JOUR A1 - Varduhn, Vasco A1 - Hsu, Ming-Chen A1 - Ruess, Martin A1 - Schillinger, Dominik T1 - The tetrahedral finite cell method: Higher-order immersogeometric analysis on adaptive non-boundary-fitted meshes JF - International Journal for Numerical Methods in Engineering Y1 - 2016 U6 - https://doi.org/10.1002/nme.5207 SN - 1097-0207 VL - 107 IS - 12 SP - 1054 EP - 1079 PB - Wiley ER - TY - JOUR A1 - Mei, Bastian A1 - Sánchez, Miguel D. A1 - Reinecke, Thomas A1 - Kaluza, Stefan A1 - Xia, Wei A1 - Muhler, Martin T1 - The synthesis of Nb-doped TiO2 nanoparticles by spray drying: an efficient and scalable method JF - Journal of Materials Chemistry Y1 - 2011 U6 - https://doi.org/10.1039/c1jm11431j SN - 1364-5501 VL - 21 IS - 32 SP - 11781 EP - 11790 PB - Royal Society of Chemistry (RSC) ER - TY - JOUR A1 - Rose, Uwe A1 - Schiel, Stefan A1 - Schröder, Helmut A1 - Kleudgen, Martin A1 - Tophoven, Silke A1 - Rauch, Angela A1 - Freude, Gabriele A1 - Müller, Grit T1 - The study of mental health at work. design and sampling JF - Scandinavian journal of public health Y1 - 2017 UR - https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5598876/ VL - 45 IS - 6 SP - 584 EP - 594 PB - Sage ER - TY - CHAP A1 - Kierepka, Oliver A1 - Brosda, Constantin A1 - Geiger, Christian ED - Herrlich, Marc ED - Malaka, Rainer ED - Masuch, Maic T1 - The Soundtrack Of Your Life T2 - Entertainment Computing - ICEC 2012, 11th, September 26-29, 2012, Bremen, Proceedings Y1 - 2012 SN - 978-3-642-33541-9 U6 - https://doi.org/10.1007/978-3-642-33542-6_47 SP - 437 EP - 440 PB - Springer CY - Berlin, Heidelberg ER - TY - JOUR A1 - Elvers, Paul A1 - Steffens, Jochen T1 - The Sound of Success: Investigating Cognitive and Behavioral Effects of Motivational Music in Sports JF - Frontiers in psychology N2 - Listening to music before, during, or after sports is a common phenomenon, yet its functions and effects on performance, cognition, and behavior remain to be investigated. Listening to music before, during, or after sports is a common phenomenon, yet its functions and effects on performance, cognition, and behavior remain to be investigated. In this study we present a novel approach to the role of music in sports and exercise that focuses on the notion of musical self-enhancement (Elvers, 2016). We derived the following hypotheses from this framework: listening to motivational music will (i) enhance self-evaluative cognition, (ii) improve performance in a ball game, and (iii) evoke greater risk-taking behavior. To evaluate the hypotheses, we conducted a between-groups experiment (N = 150) testing the effectiveness of both an experimenter playlist and a participant-selected playlist in comparison to a no-music control condition. All participants performed a ball-throwing task developed by Decharms and Davé (1965), consisting of two parts: First, participants threw the ball from fixed distances into a funnel basket. During this task, performance was measured. In the second part, the participants themselves chose distances from the basket, which allowed their risk-taking behavior to be assessed. The results indicate that listening to motivational music led to greater risk taking but did not improve ball-throwing performance. This effect was more pronounced in male participants and among those who listened to their own playlists. Furthermore, self-selected music enhanced state self-esteem in participants who were performing well but not in those who were performing poorly. We also discuss further implications for the notion of musical self-enhancement. // Listening to music before, during, or after sports is a common phenomenon, yet its functions and effects on performance, cognition, and behavior remain to be investigated. In this study we present a novel approach to the role of music in sports and exercise that focuses on the notion of musical self-enhancement (Elvers, 2016). We derived the following hypotheses from this framework: listening to motivational music will (i) enhance self-evaluative cognition, (ii) improve performance in a ball game, and (iii) evoke greater risk-taking behavior. To evaluate the hypotheses, we conducted a between-groups experiment (N = 150) testing the effectiveness of both an experimenter playlist and a participant-selected playlist in comparison to a no-music control condition. All participants performed a ball-throwing task developed by Decharms and Davé (1965), consisting of two parts: First, participants threw the ball from fixed distances into a funnel basket. During this task, performance was measured. In the second part, the participants themselves chose distances from the basket, which allowed their risk-taking behavior to be assessed. The results indicate that listening to motivational music led to greater risk taking but did not improve ball-throwing performance. This effect was more pronounced in male participants and among those who listened to their own playlists. Furthermore, self-selected music enhanced state self-esteem in participants who were performing well but not in those who were performing poorly. We also discuss further implications for the notion of musical self-enhancement. KW - Motivation KW - motor coordination KW - Music KW - risk taking KW - self-enhancement KW - Self-esteem KW - sports Y1 - 2017 U6 - https://doi.org/10.3389/fpsyg.2017.02026 VL - 8 PB - Frontiers ER - TY - JOUR A1 - Hautmann, Christopher A1 - Stein, Petra A1 - Eichelberger, Ilka A1 - Hanisch, Charlotte A1 - Plück, Julia A1 - Walter, Daniel A1 - Döpfner, Manfred T1 - The Severely Impaired Do Profit Most: Differential Effectiveness of a Parent Management Training for Children with Externalizing Behavior Problems in a Natural Setting JF - Journal of Child and Family Studies Y1 - 2011 U6 - https://doi.org/10.1007/s10826-010-9409-0 VL - 20 IS - 4 SP - 424 EP - 435 PB - Springer ER - TY - CHAP A1 - Heyman, Thomas A1 - Yskout, Koen A1 - Scandariato, Riccardo A1 - Schmidt, Holger A1 - Yu, Yijun ED - Erlingsson, Úlfar ED - Wieringa, Roel ED - Zannone, Nicola T1 - The Security Twin Peaks T2 - Engineering Secure Software and Systems: Third International Symposium, ESSoS 2011, Madrid, Spain, February 9-10, 2011. Proceedings KW - security KW - software architecture KW - requirements KW - patterns Y1 - 2011 UR - https://link.springer.com/book/10.1007/978-3-642-19125-1 SN - 978-3-642-19124-4 U6 - https://doi.org/10.1007/978-3-642-19125-1_13 VL - LNCS IS - 6542 SP - 167 EP - 180 PB - Springer CY - Berlin, Heidelberg ER - TY - CHAP A1 - Steele, Daniel A1 - Steffens, Jochen A1 - Guastavino, Catherine T1 - The role of activity in urban soundscape evaluations T2 - Proceedings of Euronoise 2015, 31 May - 3 June, Maastricht Y1 - 2015 UR - https://www.conforg.fr/euronoise2015/proceedings/data/articles/000248.pdf SP - 1507 EP - 1512 CY - Maastricht ER - TY - CHAP A1 - Neme, Christopher A1 - Seefeldt, Friedrich A1 - Gottstein, Meg A1 - Echternacht, David A1 - Moser, Albert A1 - Weston, Frederick T1 - The Positive Effects of Energy Efficiency on the German Electricity Sector: Peer-reviewed paper presented at IEPPEC 2014 International Energy Policies & Programmes Evaluation Conference T2 - 15. International Energy Policies & Programmes Evaluation Conference (IEPEC), Berlin, Deutschland, 09.09-11.09.2014 Y1 - 2014 UR - https://www.agora-energiewende.de/en/publications/the-positive-effects-of-energy-efficiency-on-the-german-electricity-sector/ SP - 1 EP - 16 CY - Berlin ER - TY - JOUR A1 - Langmann, Reinhard A1 - Michael, Stiller T1 - The PLC as a Smart Service in Industry 4.0 Production System JF - Applied Sciences Y1 - 2019 U6 - https://doi.org/10.3390/app9183815 SN - 2076-3417 VL - 9 IS - 18 PB - MDPI ER - TY - CHAP A1 - Amano, Katsumi A1 - Matsushita, Fumio A1 - Yanagawa, Hirofumi A1 - Cohen, Michael A1 - Herder, Jens A1 - Koba, Yoshiharu A1 - Tohyama, Mikio T1 - The Pioneer sound field control system at the University of Aizu Multimedia Center T2 - RO-MAN '96 Tsukuba N2 - The PSFC, or Pioneer sound field control system, is a DSP-driven hemispherical 14-loudspeaker array, installed at the University of Aizu Multimedia Center. Collocated with a large screen rear-projection stereographic display the PSFC features realtime control of virtual room characteristics and direction of two separate sound channels, smoothly steering them around a configurable soundscape. The PSFC controls an entire sound field, including sound direction, virtual distance, and simulated environment (reverb level, room size and liveness) for each source. It can also configure a dry (DSP-less) switching matrix for direct directionalization. The PSFC speaker dome is about 14 m in diameter, allowing about twenty users at once to comfortably stand or sit near its sweet spot. KW - Acoustic reflection KW - Auditory displays KW - Control systems KW - Delay effects KW - Electronic mail KW - Large screen displays KW - Loudspeakers KW - Multimedia systems KW - Reverberation KW - Size control Y1 - 1996 SN - 0-7803-3253-9 U6 - https://doi.org/10.1109/ROMAN.1996.568887 SP - 495 EP - 499 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Musall, Eike A1 - Voss, Karsten ED - Feist, Wolfgang T1 - The Passive House Concept as Suitable Basis towards Net Zero Energy Buildings T2 - Tagungsband / 16. Internationale Passivhaustagung 2012, 4. - 5. Mai 2012, Hannover KW - Querschnittsauswertung Y1 - 2012 UR - https://www.researchgate.net/publication/260719331_The_Passive_House_Concept_as_Suitable_Basis_towards_Net_Zero_Energy_Buildings SN - 978-3-00-037721-1 SP - 271 EP - 276 PB - Passivhaus-Inst. CY - Darmstadt ER - TY - CHAP A1 - Unterfrauner, Elisabeth A1 - Voigt, Christian A1 - Schrammel, Maria A1 - Menichinelli, Massimo ED - Diplaris, Sotiris ED - Satsiou, Anna ED - Følstad, Asbjørn ED - Vafopoulos, Michail ED - Vilarinho, Thomas T1 - The Maker Movement and the Disruption of the Producer-Consumer Relation T2 - Internet Science Y1 - 2018 SN - 978-3-319-77546-3 U6 - https://doi.org/10.1007/978-3-319-77547-0_9 VL - Lecture Notes in Computer Science: 10750 SP - 113 EP - 125 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Liang, Ke A1 - Ruess, Martin A1 - Abdalla, Mostafa T1 - The Koiter–Newton approach using von Kármán kinematics for buckling analyses of imperfection sensitive structures JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2014 U6 - https://doi.org/10.1016/j.cma.2014.07.008 SN - 0045-7825 VL - 279 SP - 440 EP - 468 PB - Elsevier ER - TY - JOUR A1 - Lyalina, Yuliya A1 - Langmann, Reinhard A1 - Krisilov, V. T1 - The Interaction Model in iLearning Environments and its Use in the Smart Lab Concept JF - International Journal of Online Engineering Y1 - 2011 U6 - https://doi.org/10.3991/ijoe.v7i4.1793 VL - 7 IS - 4 PB - iJOE ER - TY - CHAP A1 - Elvers, Paul A1 - Steffens, Jochen ED - Goschke, Thomas ED - Bolte, Annette ED - Kirschbaum, Clemens T1 - The influence of motivational music on risk-behavior and ball-throwing performance T2 - TeaP 2017: Abstracts of the 59th Conference of Experimental Psychologists : Dresden, Germany, March 26-29, 2017 Y1 - 2017 SN - 978-3958532946 PB - Pabst Science Publishers CY - Lengerich ER - TY - JOUR A1 - Steffens, Jochen T1 - The influence of film music on moral judgments of movie scenes and felt emotions JF - Psychology of Music KW - effects of music KW - Emotion KW - film music KW - moral foundations KW - moral judgments KW - soundtrack Y1 - 2020 VL - 48 SP - 3 EP - 17 PB - Sage ER - TY - JOUR A1 - Anglada-Tort, Manuel A1 - Keller, Steve A1 - Steffens, Jochen A1 - Müllensiefen, Daniel T1 - The Impact of Source Effects on the Evaluation of Music for Advertising JF - Journal of Advertising Research Y1 - 2020 U6 - https://doi.org/10.2501/JAR-2020-016 VL - 60 IS - 3 PB - ARF ER - TY - CHAP A1 - Greb, Fabian A1 - Steffens, Jochen T1 - The Impact of Music Preference on the Physiological Activation of the Human Body due to Music Reception T2 - Fortschritte der Akustik 2013, DAGA-AIA, Merano, Italy, CD-ROM Y1 - 2013 CY - Merano ER - TY - JOUR A1 - Herder, Jens A1 - Cohen, Michael T1 - The Helical Keyboard: Perspectives for Spatial Auditory Displays and Visual Music JF - Journal of New Music Research N2 - Auditory displays with the ability to dynamically spatialize virtual sound sources under real-time conditions enable advanced applications for art and music. A listener can be deeply immersed while interacting and participating in the experience. We review some of those applications while focusing on the Helical Keyboard project and discussing the required technology. Inspired by the cyclical nature of octaves and helical structure of a scale, a model of a piano-style keyboard was prepared, which was then geometrically warped into a helicoidal configuration, one octave/revolution, pitch mapped to height and chroma. It can be driven by MIDI events, real-time or sequenced, which stream is both synthesized and spatialized by a spatial sound display. The sound of the respective notes is spatialized with respect to sinks, avatars of the human user, by default in the tube of the helix. Alternative coloring schemes can be applied, including a color map compatible with chromastereoptic eyewear. The graphical display animates polygons, interpolating between the notes of a chord across the tube of the helix. Recognition of simple chords allows directionalization of all the notes of a major triad from the position of its musical root. The system is designed to allow, for instance, separate audition of harmony and melody, commonly played by the left and right hands, respectively, on a normal keyboard. Perhaps the most exotic feature of the interface is the ability to fork oneís presence, replicating subject instead of object by installing multiple sinks at arbitrary places around a virtual scene so that, for example, harmony and melody can be separately spatialized, using two heads to normalize the octave; such a technique effectively doubles the helix from the perspective of a single listener. Rather than a symmetric arrangement of the individual helices, they are perceptually superimposed in-phase, co-extensively, so that corresponding notes in different registers are at the same azimuth. KW - 3D audio KW - virtual reality KW - computer music KW - spatialization KW - spatial media KW - visual music KW - VSVR Y1 - 2002 VL - 31 IS - 3 SP - 269 EP - 281 ER -