TY - CHAP A1 - Grote-Ramm, Wolfgang A1 - Schönig, Felix A1 - Schwarzbözl, Peter A1 - Drexelius, Maximilian A1 - Maldonado Quinto, Daniel A1 - Binder, Matthias T1 - Model Predictive Control and Service Life Monitoring for Molten Salt Solar Power Towers T2 - 29th SolarPACES Conference, Sydney N2 - A two-component system for control and monitoring of solar power towers with molten salt receivers is proposed. The control component consists of a model predictive control applica-tion (MPC) with a flexible objective function and on-line tunable weights, which runs on a In-dustrial PC and uses a reduced order dynamic model of the receiver’s thermal and flow dy-namics. The second component consists of a service-life monitoring unit, which estimates the service-life consumption of the absorber tubes depending on the current mode of operation based on thermal stresses and creep fatigue in the high temperature regime. The calculation of stresses is done based on a detailed finite element study, in which a digital twin of the re-ceiver was developed. By parallelising the model solver, the estimation of service-life con-sumption became capable of real-time operation. The system has been implemented at a test facility in Jülich, Germany, and awaits field experiments. In this paper, the modeling and archi-tecture are presented along simulation results, which were validated on a hardware-in-the-loop test bench. The MPC showed good disturbance rejection while respecting process variable constraints during the simulation studies. KW - Solar Power Tower KW - Molten Salt KW - Model Predictive Control KW - Dynamic Modelling KW - Service-life Monitoring Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-43233 PB - SolarPACES ER - TY - CHAP A1 - Kretschmar, Dominik A1 - Niemann, Jörg T1 - Meta-Analysis of Sustainability Management in Complex Development Environments: By Integrating Requirements into Systems Engineering Approaches T2 - Proceedings of the Review of Management and Economic Engineering 9th International Management Conference "Rethinking Management in Adaptive Environments", Cluj-Napoca, Romania, 1echnical University of Cluj-Napoca, Romania,19 -21 September, 2024, Technical University of Cluj-Napoca, Romania N2 - Purpose – The complexity of developing product service systems continues to increase. At the same time, development cycles are becoming ever shorter and the requirements for safety, conformity and sustainability ever higher. In this article, a meta-analysis is carried out on the possibility of integrating sustainability aspects as requirements in a systems engineering approach and the differences are discussed. Methodology/approach - A systematic literature search of articles in ScienceDirect between 2016 and 2023 is carried out. The keywords are sustainability and system engineering incl. synonyms. In a further step, the papers are screened for their relevance to product service systems and the relevance for the purpose. Findings – To address sustainability in complex technical systems, a holistic, model-based approach is required to ensure that sustainability aspects are considered. By using frameworks and methods such as macPro² and SysLM, requirements and indicators for sustainability can be integrated into the development phase, whereas currently only the environmental dimension is usually considered via resource and energy indicators. Research limitations/implications – In order to achieve a complete picture, additional databases must be considered and research results from ongoing projects must be awaited. KW - Systemtechnik KW - Hybrides Leistungsbündel KW - Nachhaltigkeit Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-55374 UR - https://conference.rmee.org/wp-content/uploads/2024/10/Proceedings_RMEE2024_online_ISSN-3061-3892.pdf SN - 3061-3892 PB - UTPRESS ER - TY - CHAP A1 - von Berg, Markus A1 - Prinz, Lukas A1 - Steffens, Jochen T1 - Comparing individual perception of timbre and reverberance BT - Proceedings of the 24th International Congress on Acoustics N2 - Room reverberation alters the spatial impression and timbre of a sound by modulating its spectral and temporal characteristics. Thus, we argue that, on a perceptual level, reverberation basically breaks down into interaural differences and spectro-temporal cues and that the separation of a perceived timbre into a sound source and a surrounding room is a purely cognitive process. To investigate the connection between the perception of reverberation cues and timbre analysis, the sensitivity for changes in reverberation was compared to timbre perception abilities. The Timbre Perception Test was used to measure the perception of the temporal envelope, spectral centroid, and spectral flux of artificial sounds. Sensitivity for changes in reverberation time was tested with a discrimination task using speech and noise with speech-alike spectral and temporal envelopes as source signals. Musical and acoustical expertise was assessed through the Goldsmiths Musical Sophistication Index and self-reports on experience with and knowledge of acoustics. There was a considerable correlation between timbre and reverberance perception ability, but timbre perception and academic experience predicted only 41% of the variance in reverberance perception. Still, perception abilities related to similar acoustical phenomena seem to be better indicators of listening skills than self-reports on acoustical or musical expertise. KW - Timbre KW - Klangfarbe KW - Reverberation KW - Nachhall Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-38706 UR - https://ica2022korea.org/data/Proceedings_A11.pdf PB - International Commission for Acoustics CY - Gyeoungju, Südkorea ER - TY - CHAP ED - Jahr, Andreas ED - Batos, Andrej T1 - SIMULAND 2020: Simulation landtechnischer Prozesse, Düsseldorf, 19. März 2020 N2 - Die Simulation landwirtschaftlicher Prozesse hat in den vergangenen Jahren stark an Bedeutung gewonnen. Damit ist die Hoffnung verbunden, neue Erkenntnisse zu generieren mit dem Ziel der Erhöhung der Effizienz, Qualität und Wirtschaftlichkeit in der Landwirtschaft. Besonders große Herausforderungen stellen dabei die Modellierung landwirtschaftlicher Güter und der für Simulationen teilweise erforderliche, hohe Rechenaufwand dar. Um der bereits recht weiten und weiter fortschreitenden Verbreitung dieser Technologien Rechnung zu tragen und sie zu fördern, entstand die Idee für eine themenspezifische Tagung, die sich ausdrücklich und ausschließlich mit der Simulation landtechnischer Güter und Prozesse befasst. N2 - The simulation of agricultural processes has become important in recent years. Nowadays, the focus is mainly on the virtual representation of agricultural goods and the processes associated with their processing and handling. The goal of these efforts is to generate new knowledge helping to increase efficiency, quality and profitability in agriculture. Modelling of agricultural goods poses a large challenge due to their highly complex structure and a high scattering of the measured values as well as their inhomogeneous and time-varying properties. In addition, some simulation cases result in a high computing effort. In order to support and promote the already quite broad and progressive dissemination of these technologies, the idea for a topic-specific conference was born, which deals explicitly and exclusively with the simulation of agricultural goods and processes. T2 - SimuLand 2020 - Conference Proceedings KW - Simulation KW - VDI KW - Modellierung KW - Simulation KW - Parametrierung KW - Parameterermittlung KW - parameterization KW - parameter determination KW - agricultural goods Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-23368 SN - 978-3-941334-30-4 CY - Düsseldorf ER - TY - CHAP A1 - Trofimov, Igor A1 - Jahr, Andreas T1 - Zeitsignale im Massenstrom eines Linearschwingförderers zur Nutzung für Regelungsaufgaben T2 - IFToMM D-A-CH Konferenz / Vierte IFToMM D-A-CH Konferenz 2018 Y1 - 2018 U6 - https://doi.org/10.17185/duepublico/45302 SP - 1 EP - 9 PB - DuEPublico CY - Duisburg-Essen ER - TY - CHAP A1 - Dehmer, Joanna A1 - Niemann, Jörg T1 - Platform-based value chain management T2 - The 6th International Conference on Manufacturing Engineering and Process (ICMEP 2017), May 27th-29th 2017, Lisboa, Portugal N2 - The transformation of traditional value chain processes towards a digital value chain management enables companies to sustainably establish and retain a competitive market position. Digitisation offers the opportunity to design and operate expansive process chains with efficient process operations via co-operative platforms. Increased customer loyalty („lock-in“) via integrated measures at the front-end raises utilization and planning certainty for the technological recovery system Y1 - 2017 UR - https://www.researchgate.net/publication/318858832_Plattform-based_value_chain_management ER - TY - CHAP A1 - Niemann, Jörg A1 - Dehmer, J. A1 - Batos, Andrej A1 - Kiel, Jürgen A1 - Seifert, S. T1 - The impact of electrification to the total cost of ownership of mobile production machines on the example of a forage harvester T2 - 25th Southern African Universities Power Engineering Conference (SAUPEC 2017), 30.01.-01.02.2017 KW - Life cycle costing KW - Total cost of ownership KW - Sensitivity Analysis KW - Energy Efficiency KW - Energy Management KW - Electrification Y1 - 2017 UR - https://www.researchgate.net/publication/318858764_The_impact_of_electrification_to_the_total_cost_of_ownership_of_mobile_production_machines_on_the_example_of_a_forage_harvester ER - TY - CHAP A1 - Barbashov, Maksim A1 - Batos, Andrej A1 - Jahr, Andreas ED - Holzhauer, Ralf T1 - Experimentelle und theoretische Grundlagenuntersuchung landtechnischer Schnittprozesse bei verschiedenen Schnittgeschwindigkeiten T2 - Ressourcen-Wissen : Hebung ungenutzter Potenziale : Tagungsband Vortragsveranstaltung der Fachgruppe Ressourcen des Graduierteninstitutes NRW, 16. März 2017, Hochschule Bochum Y1 - 2017 SN - 978-3-9819028-0-8 SP - 142 EP - 146 PB - Graduierteninstitut NRW CY - Bochum ER - TY - CHAP A1 - Batos, Andrej A1 - Beckers, S. A1 - Grüner, S. A1 - Kiel, J. A1 - Jahr, A. A1 - Schniederbruns, B. A1 - Berghaus, A. A1 - Weiß, P. ED - Wissensforum GmbH, VDI T1 - Möglichkeiten und Grenzen eines in einem Feldhäcksler verbauten, elektrisch angetriebenen Wurfbeschleunigers T2 - LAND.TECHNIK 2016: Das Forum für agrartechnische Innovationen Y1 - 2016 SN - 978-3-18-102273-3 U6 - https://doi.org/10.51202/9783181022733-325 VL - VDI-Berichte, 2273 SP - 325 EP - 332 PB - VDI Verlag CY - Düsseldorf ER - TY - CHAP A1 - Batos, Andrej A1 - Jahr, Andreas A1 - Corves, B. T1 - Experimental Investigations for the Characterization of Cutting Processes on Biomaterials [Oralposter] T2 - European Symposium and Exhibition on Biomaterials and Related Areas – Euro BioMAT 2015 Y1 - 2015 ER - TY - CHAP A1 - Jahr, Andreas A1 - Bongartz, Robert A1 - Sim, Hunn A1 - Pillmann, Alex T1 - A Novel Test Method to Determine the Wear Resistance of Agricultural Cutting Tools with an Analyzing Method Based on an Ellipse-Fit Algorithm T2 - Conference Papers in Science N2 - Cutting belongs to the essential techniques in many fields of application in agricultural engineering. Cutting tools in agricultureare exposed to a high amount of abrasive wear and impact stress. Increasing the wear resistance of cuttings tools has a highsignificance for the efficiency and profitability of agricultural machinery. Blunt and deformed blades decrease the energy efficiencyand the cutting quality. Blade failures cause machine breakdowns and increase labor and material costs. To enable a consistent andsystematic optimization of the blades, a suitable testing method is necessary. Conventional field tests do not provide comparableand repeatable results. Therefore, a test method developed at the FMDauto in cooperation with the Ennepetaler Schneid- undM¨ahtechnik (ESM) GmbH & Co. KG is presented. The test bench provides standardized and repeatable conditions with a similarwear pattern which is found during field operations. One of the remaining challenges is a clear wear characterization. Existinganalyzing methods do not consider the energy efficiency and do not determine the edge holding property clearly. In this paper, anew analyzing method based on an ellipse-fit method is introduced to rate the geometrical shape of the cutting edge and examinethe wear resistance of different blade Y1 - 2015 U6 - https://doi.org/10.1155/2015/548238 SN - 2356-6108 N1 - This Conference Paper is based on a presentation given by Hunn Sim at “European Symposium on Friction, Wear, and WearProtection” held from 6 May 2014 to 8 May 2014 in Karlsruhe, Germany VL - 2015 SP - 1 EP - 6 PB - Wiley ER -