TY - RPRT A1 - Bhaiya, Madhur A1 - Jahr, Andreas A1 - Happel, Holger T1 - Harvesting-Combine-Flow Simulation Technique N2 - CFX 11.0 is a Computational Fluid Dynamics (CFD) program for simulating the behavior of systems involving fluid flow, heat transfer, and other related physical processes. It works by solving the equations of fluid flow (in a special form) over a region of interest, with specified (known) conditions on the boundary of that region. This tool is used here to analyse the straw cutter which is used to comminute the straw which is left standing in the field after stripper header has stripped the grains from the crops. Stripper Header is a new technique different to conventional harvester machines and it is still under development and testing. It works on the principle in which grains are first stripped off from the head of the standing crop which helps in much reduced intake freeing up the separation systems to handle a larger volume of grains. But with this, the new problem of the disposal of the long, uncut straw left after stripping of grains arose. So a straw cutter is used after the stripper header stage in this Combine Harvester, where the rotor is equipped with pressed steel blades and rotates towards the crop, i.e., it cuts and lifts the straw over the top. This technique is environment friendly because previously farmers would have to burn the long, uncut straw standing in the fields while in this case mulched straw can be used for min-till systems. This rotor based straw cutting machine is analysed here which helps us in increasing power efficiency and comminution rate and quality of cut straw particles. Here fluid flow simulation has been preferred over particle simulation: - CFX 10.0 tool is not very effective for particle simulation techniques and computation time is increased considerably. - It’s very hard to realize particle simulation in CFX 10.0 because we have to define size and properties of each particle and besides this wall conditions would have to be defined differently for every boundary. - Besides this, it’s hard to realize cutting effect with straw particles in CFX 10.0 which otherwise would be comminuted in real life conditions. - The results obtained from fluid simulation are validated using experimental results and found to be nearly the same which clearly contradicts any need of performing particle simulation. KW - Häckseln KW - Ernte KW - Stroh KW - Partikelstrom KW - CFD KW - chaff KW - harvesting KW - Particle flow KW - simulation KW - FHD Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4239 CY - Düsseldorf ER - TY - RPRT A1 - Deckert, Carsten ED - Niemann, Jörg ED - Deckert, Carsten T1 - Tensions in Team Creativity: Using the Value Square to Model Team Climate for Creativity N2 - This paper explores the tensions in team creativity. The tensions in team creativity are based on a tension between originality and effectiveness in the standard definition of creativity. To display the tensions in team creativity, the value square (“Wertequadrat”) developed by Schulz von Thun (1998) is used which balances a value with its countervalue. The author identifies tensions for cohesion, consensus and conformity. Cohesion is described as a tension between team diversity and team safety, consensus as a tension between constructive controversy and participatory decision-making and conformity as a tension between support for innovation and task orientation. Finally, the connection of individual and team creativity is described as an interplay between solitary and interactive components. T3 - Working Papers in Industrial Engineering - 1 KW - Innovation KW - Creativity KW - Team Climate Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-16763 SN - 2627-8375 CY - Düsseldorf ER - TY - RPRT A1 - Biedermann, Till M. A1 - Kameier, Frank T1 - Konzeption eines praxisnahen Versuchsstandes zur Untersuchung von Leading Edge Serrations als Proof-of-Concept N2 - Der Einsatz von Leading Edge Serrations (gezackte Tragflächenvorderkanten) als Schallminderungsmaßnahme bei hochturbulenter Anströmung wurde bisher maßgeblich in Form von eben im Windkanal gelagerten, modifizierten Tragflügeln untersucht. Diese Untersuchungen dienten der aeroakustischen Designoptimierung und der Identifikation von Wirkmechanismen anhand eines simplifizierten Systems. Das zukünftige Einsatzgebiet dieser neuartigen Modifikation wird im Bereich von Windenergieanlagen, Flugzeugtriebwerken und kontrarotierenden Rotoren der nächsten Generation aber auch bei gängigen Axialverdichtern gesehen. Der Transfer der im ebenen System erhaltenen Erkenntnisse in Richtung einer rotierenden Applikation erfordert die Berücksichtigung einer Vielzahl an zusätzlichen Einflussgrößen, welche die aerodynamische und aeroakustische Effizienz der Leading Edge Serrations in Form verstärkender oder auch hemmender Effekte signifikant beeinflussen können. Im durchgeführten Projekt wurde untersucht, inwieweit sich diese durch Buckelwale und Eulen inspirierten Tragflächen auf rotierende Systeme übertragen lassen, ohne Einbußen ihrer bereits bestätigten vorteilhaften aeroakustischen und aerodynamischen Eigenschaften zu erleiden. Von besonderem Interesse waren hier etwaige Einflüsse der mit dem Radius variierenden Umfangsgeschwindigkeit sowie der im Praxisfall stark variierenden Anströmrichtungen und –zustände. In diesem Sinne wurde ein experimenteller Versuchsstand in Anlehnung an die DIN EN ISO 5136 zur simultanen Vermessungen der aeroakustischen und aerodynamischen Eigenschaften konzipiert. Ein eigens konzipierter Modellrotor in Form eines Axialverdichters ermöglichte einen flexiblen Austausch der Rotorblätter, was die Möglichkeit einer kosten- und zeitsparenden Variation der Rotorblattgeometrien bietet. Im Rahmen des Projektes konnten neben der Konzeption des Versuchsstandes im Rahmen einer experimentellen Proof-of-Concept Studie und einer umfangreichen Quantifizierung der Zuströmbedingungen auch das Schallreduktionspotential der untersuchten Applikation im rotierenden System nachgewiesen werden. Eine Variation verschiedener aerodynamischer und geometrischer Einflussgrößen lässt zudem allgemeingültige Aussagen bezüglich der zugrundeliegenden Abhängigkeiten zu. Zudem führten parallele Untersuchungen mittels Array-Beamforming mit dem Ziel der Schallquellenlokalisationen zu wertvollen Transfererkenntnissen bezüglich des Einsatzes von Leading Edge Serrations im rotierenden System. Eine erste Untersuchung zur möglichen Approximation der Wirkzusammenhänge von Einfluss- und Zielgrößen wies ein hohes Potential zur komplexen Modellbildung mittels neuronaler Netze aus. Die gewonnenen Erkenntnisse tragen zu einem tieferen Verständnis der zugrundeliegenden Wirkmechanismen von Leading Edge Serrations bei und unterstützten in der Definition weiterer verbleibender Forschungslücken, deren Erforschung im mittel- bis langfristigen Kontext einen Beitrag zu einer industriellen Verwertung dieser Applikation und somit zu einer Reduktion der Lärmbelastung der Bevölkerung leistet. N2 - Leading Edge Serrations are well known for their superior performance in reducing aerofoil-gust-interaction noise as well as beneficial aerodynamic properties such as delayed stall effects and an increased post stall performance. However, up to now, Leading Edge Serrations were mainly analysed in a rigidly mounted setting in front of free jets or in cascade applications in order to investigate fundamental effects and to study the underlying aerodynamic and aeroacoustic principles. Eventually, these serrations are intended to be used in rotating systems such as turbomachines, counter rotating rotors or fans and blowers. Even wind energy turbines represent a possible field of application. The transfer of the rigidly well-analysed serration effects to the rotating frame, though, poses one of the main obstacles for successfully implementing Leading Edge Serrations as a passive noise reduction application as several additional parameters and varying boundary conditions might affect the aerodynamic and aeroacoustic efficiency of the serrations. The current project investigates on how these serrations, inspired by owls and humpback whales, can be transferred to the rotating system by avoiding losses in aeroacoustic and aerodynamic performance and taking into account the already acquired knowledge on the underlying effects. Of particular interest are effects of the circumferential velocity, which scales linearly with the rotor radius as well as effects of varying points of operation, leading to changes in the stagger angles or altering inflow conditions, respectively. For the experimental study a test rig according to the ISO 5136 standard was realised, allowing a simultaneous measurement of both, aerodynamic and aeroacoustic properties. The rotor was self-designed according to the single aerofoil approach, featuring exchangeable fan blades to enable a time- and cost efficient variation of the serration parameters. Apart from realising the test rig and a detailed quantification of the inflow conditions, a Proof-of-Concept study was performed in order to confirm the aeroacoustic effect of Leading Edge Serrations in a rotating application and to carve out the noise reduction potential. Moreover, a variation of the geometric serration parameters as well as the aerodynamic inflow conditions already allows for drawing basic conclusions on the underlying scaling-laws and dependencies. A supplementary aeroacoustic study via array beamforming in the rigid frame provided information on the positions of main noise sources of aerofoils with and without serrations, which were of high value and facilitated a successful transfer to the rotating frame. Finally, by use of artificial neural networks, first steps were undertaken towards modelling the effect of the investigated parameters on the aerodynamic and aeroacoustic performance. A first developed fundamental model already allows for a prediction of the noise radiation and offers multiobjective-optimisation by means of aerodynamic and aeroacoustic properties. T3 - Berichte zu HSD-intern geförderten Forschungsprojekten - 2 KW - Konzeption KW - Leading Edge Serrations KW - Proof of Concept KW - Versuch Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-12300 SN - 2625-3690 CY - Düsseldorf ER - TY - RPRT A1 - Deckert, Carsten A1 - Maschmann, Jonas Christopher A1 - Ngoy, Mayanga T1 - Kreativität und Entrepreneurship im Masterstudium Maschinenbau an deutschen Fachhochschulen und Universitäten N2 - Von Maschinenbau-Ingenieur*innen wird oft erwartet, innovative Produkte, Dienstleistungen oder Prozesse zu entwickeln und zu vermarkten. Das Ziel der vorliegenden Arbeit ist es herauszufinden, inwiefern sie bereits im Masterstudium Maschinenbau durch die Förderung von Kreativität und Entrepreneurship darauf vorbereitet werden. Um die Forschungsfrage zu beantworten, wurden die Modulhandbücher der zehn größten Universitäten sowie Fachhochschulen mithilfe einer Schlagwortsuche auf einschlägige Begriffe analysiert. Die Studie zeigt, dass deutsche Ingenieur*innen sowohl an Fachhochschulen als auch an Universitäten hinsichtlich Kreativität und Entrepreneurship eher unzureichend ausgebildet werden. N2 - Mechanical engineers are often expected to develop and commercialize innovative products, services, or processes. The aim of this study is to find out to what extent they are already prepared for this in the master's programme in mechanical engineering by promoting creativity and entrepreneurship. To answer the research question, the module manuals of the ten largest universities and colleges were analysed for relevant terms using a keyword search. The study shows that German engineers are rather inadequately trained in creativity and entrepreneurship, both at universities and universities of applied sciences. T3 - Working Papers in Industrial Engineering - 4 KW - Kreativität KW - Innovation KW - Entrepreneurship KW - Entrepreneurial Mindset KW - Creativity KW - Mechanical Engineering Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-32121 SN - 2627-8375 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - RPRT A1 - Deckert, Carsten A1 - Schomaker, Rahel M. A1 - Knappitsch, Eithne T1 - Culture and Entrepreneurship: The Political, Social and Individual Influences on Opportunity Entrepreneurs N2 - The impact of culture on entrepreneurship is a widely accepted phenomenon. Cultural factors influence entrepreneurship via different mechanisms on the macro-, meso-, and micro-level of a country. Building on existing research, we draw a clear link between national cultural dimensions and entrepreneurship, using a new model that arranges different cultural dimensions in groups based on their particular function: political, social, or individual (PSI-model) and that distinguishes between values and practices where relevant. The PSI-model provides a coherent theoretical framework on which different cultural dimensions and their impact on entrepreneurship can be analysed, allowing for particular attention to be drawn to social practices and social values. This paper contributes to a better understanding of the relationship between culture and entrepreneurship, providing empirical evidence of how specific cultural dimensions influence entrepreneurship. The findings are of relevance from a policy perspective and can be used to generate practical recommendations for national institutions interested in promoting entrepreneurship and entrepreneurial activities. The findings are also transferable to other fields related to national cultural dimensions such as level of innovation, investment, budgeting etc. T3 - Working Papers in Industrial Engineering - 3 KW - Entrepreneurship KW - Cultural Dimensions KW - National Culture KW - PSI Model Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-23837 SN - 2627-8375 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - RPRT A1 - Rings, Jørn A1 - Deckert, Carsten T1 - Innovation Spaces: Einfluss der physischen Arbeitsumgebung auf kreatives Denken in Büroumgebungen N2 - Das vorliegende Working Paper untersucht den Einfluss der physischen Arbeitsumgebung auf die Kreativität in Unternehmen. Dabei werden sowohl Aspekte der individuellen Kreativität als auch der Corporate Creativity (organisationalen Kreativität) betrachtet. Das Ergebnis ist eine Raumtypologie, die Funktionen eines Raumes in die beiden Achsen „Handeln vs. Geschehen-Lassen“ und „Rückzug vs. Begegnung“ einteilt und dadurch vier unterschiedliche Raumtypen im Hinblick auf die Kreativität unterscheidet. Diese vier Raumtypen sind die Grundlage für das Verständnis von Innovation Spaces – räumlichen Flächen im Unternehmen, die die Kreativ- und Ideenarbeit unterstützen. Das Wirken und die Ausgestaltung dieser unterschiedlichen Funktionen wird anhand von zwei Umsetzungsbeispiele von realisierten Innovation Spaces dargestellt und anhand der Ergebnisse einer Studie zu Akzeptanz und Erfolg von Innovation Spaces untersucht. Daraus werden Handlungsempfehlungen an Unternehmen herausgearbeitet, die Innovation Spaces als Teil einer Innovationskultur im Kontext von New Work begreifen. T3 - Working Papers in Industrial Engineering - 2 KW - Arbeitsplatz KW - Corporate Creativity KW - Innovation Spaces Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-20503 SN - 2627-8375 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - RPRT A1 - Neef, Matthias A1 - Laux, Christoph T1 - Optimierung des elektrischen Nutzungsgrades eines Blockheizkraftwerks durch Abwärmeverwertung in einem nachgeschalteten Dampfkraftprozess N2 - Abschlussbericht Förderung: Bundesministerium für Bildung und Forschung (BMBF) Förderkennzeichen: 03FH006I2 Projektzeitraum: 31.08.2012 -31.08.2015 Y1 - 2016 U6 - https://doi.org/10.2314/GBV:867675985 CY - Düsseldorf ER - TY - RPRT A1 - Deckert, Carsten T1 - Innovation Scouting - Auf der Suche nach der radikalen Innovation T2 - CBS Working Paper Series N2 - Veränderte wirtschaftliche Rahmenbedingungen und die zunehmende Bedeutung von radikalen Innovationen und technologischen Diskontinuitäten führen dazu, dass mehr und mehr Unternehmen Scouting-Aktivitäten implementieren. Diese gehen über das klassische Innovationsmanagement hinaus. Im vorliegenden Beitrag werden Auswirkungen dieses Scouting Paradigmas diskutiert und ein Framework zu dessen Umsetzung entwickelt, das sowohl den Blick nach außen als auch nach innen richtet. External Innovation Scouting dient dazu, systematisch Technologien und Geschäftsideen als Innovationschancen für das Unternehmen zu ermitteln. Beim Internal Innovation Scouting geht es darum, die richtigen Rahmenbedingungen dafür zu schaffen, dass Mitarbeiter Innovationschancen aufgreifen und im Unternehmen radikale Innovationen marktreif entwickeln können. Außerdem stellt das Innovation Scouting neue Anforderungen an die Innovationsbewertung. Innovation Scouting ergänzt das bestehende Innovationsmanagement um eine langfristige Perspektive, die für das Überleben jenseits der Quartalsberichte von entscheidender Bedeutung sein kann. Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-18296 UR - https://www.researchgate.net/publication/271013459_Innovation_Scouting_-_Auf_der_Suche_nach_der_radikalen_Innovation VL - 2 PB - Cologne Business School CY - Köln ER - TY - RPRT A1 - Deckert, Carsten T1 - Tensions in Creativity - Using the Value Square to Model Individual Creativity T2 - CBD Working Paper Series N2 - The definition of individual creativity is based on a tension between novelty on the one side and usefulness respectively appropriateness on the other side. The paper explores how this tension pervades the stage and componential theories of creativity. To achieve this, the so called value square (“Wertequadrat”) developed by Helwig (1967) and Schulz von Thun (1998)is used which balances a value with its countervalue to analyze creativity. The author identifies tensions of action and inaction, expertise and mindfulness, precision and ambiguity as well as immersion and detachment permeating the creative process and the components of creativity. As a conclusion a morphological box for creativity is presented which allows one to show which combination of characteristics of the tensions support different stages of creativity. Furthermore implications for development and time management are discussed. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-18209 UR - https://www.researchgate.net/publication/282875608_Tensions_in_Creativity_-_Using_the_Value_Square_to_Model_Individual_Creativity VL - 2 PB - Cologne Business School CY - Köln ER - TY - RPRT A1 - Deckert, Carsten T1 - Tensions in Creative Products - Using the Value Square to Model Functional Creativity T2 - CBS Working Paper Series Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-18078 UR - https://www.researchgate.net/publication/305900610_Tensions_in_Creative_Products_-_Using_the_Value_Square_to_Model_Functional_Creativity VL - 4 PB - Cologne Business School CY - Köln ER -