TY - JOUR A1 - Deckert, Carsten A1 - Sürgit, Hasan T1 - Soziale Innovation in Non-Profit- Organisationen JF - Ideen- und Innovationsmanagement Y1 - 2022 U6 - https://doi.org/10.37307/j.2198-3151.2022.03.05 SN - 2198-3151 IS - 3 PB - Erich Schmidt Verlag ER - TY - CHAP A1 - Dehmer, Joanna A1 - Niemann, Jörg T1 - Platform-based value chain management T2 - The 6th International Conference on Manufacturing Engineering and Process (ICMEP 2017), May 27th-29th 2017, Lisboa, Portugal N2 - The transformation of traditional value chain processes towards a digital value chain management enables companies to sustainably establish and retain a competitive market position. Digitisation offers the opportunity to design and operate expansive process chains with efficient process operations via co-operative platforms. Increased customer loyalty („lock-in“) via integrated measures at the front-end raises utilization and planning certainty for the technological recovery system Y1 - 2017 UR - https://www.researchgate.net/publication/318858832_Plattform-based_value_chain_management ER - TY - CHAP A1 - Niemann, Jörg A1 - Dehmer, J. A1 - Batos, Andrej A1 - Kiel, Jürgen A1 - Seifert, S. T1 - The impact of electrification to the total cost of ownership of mobile production machines on the example of a forage harvester T2 - 25th Southern African Universities Power Engineering Conference (SAUPEC 2017), 30.01.-01.02.2017 KW - Life cycle costing KW - Total cost of ownership KW - Sensitivity Analysis KW - Energy Efficiency KW - Energy Management KW - Electrification Y1 - 2017 UR - https://www.researchgate.net/publication/318858764_The_impact_of_electrification_to_the_total_cost_of_ownership_of_mobile_production_machines_on_the_example_of_a_forage_harvester ER - TY - BOOK A1 - Marzi, Thomas A1 - Deerberg, Görge A1 - Dötsch, Christian A1 - Grevé, Anna A1 - Hiebel, Markus A1 - Kaluza, Stefan A1 - Knappertsbusch, Volker A1 - Maga, Daniel A1 - Müller, Torsten A1 - Pflaum, Hartmut A1 - Pohlig, Astrid A1 - Renner, Manfred A1 - Seifert, Ulrich A1 - Stießel, Sebastian A1 - Unger, Christoph A1 - Wack, Thorsten A1 - Weidner, Eckhard T1 - Kohlendioxid, Biomasse und Regenerativer Strom - Ressourcen einer neuen Kohlenstoffwirtschaft? Y1 - 2017 SN - 978-3-87468-358-6 U6 - https://doi.org/10.24406/UMSICHT-N-473349 VL - Umsicht-Diskurs IS - 1 PB - Fraunhofer-Institut für Umwelt-, Sicherheit- und Energietechnik CY - Oberhausen ER - TY - CHAP A1 - Barbashov, Maksim A1 - Batos, Andrej A1 - Jahr, Andreas ED - Holzhauer, Ralf T1 - Experimentelle und theoretische Grundlagenuntersuchung landtechnischer Schnittprozesse bei verschiedenen Schnittgeschwindigkeiten T2 - Ressourcen-Wissen : Hebung ungenutzter Potenziale : Tagungsband Vortragsveranstaltung der Fachgruppe Ressourcen des Graduierteninstitutes NRW, 16. März 2017, Hochschule Bochum Y1 - 2017 SN - 978-3-9819028-0-8 SP - 142 EP - 146 PB - Graduierteninstitut NRW CY - Bochum ER - TY - THES A1 - Batos, Andrej T1 - Domänenübergreifende Mehrkörpersimulation bei Teilungsprozessen pflanzlicher Erntegüter: = Cross-domain multi-body simulation of plant separation processes Y1 - 2016 SN - 978-3-95886-128-2 N1 - RWTH Aachen University, Dissertation, 2016 PB - Verlagshaus Mainz CY - Aachen ER - TY - CHAP A1 - Fomin, A.S. A1 - Kiselev, S.V. A1 - Jahr, Andreas A1 - Sim, H. T1 - Development of the Kinematic Model of Horizontal-Set Drive for Blades of Combine Harvester Thresher T2 - Materialien zum wissenschaftlichen Seminar der Stipendiaten der Programme «Michail Lomonosov» und «Immanuel Kant» 2015/2016 Y1 - 2017 IS - 12 SP - 188 EP - 196 ER - TY - THES A1 - Trofimov, Igor T1 - Modellgestützte Entwicklung eines Verfahrens zur Volumenstromermittlung an Vibrationsfördersystemen N2 - Das in dieser Arbeit behandelte Thema zur angewandten Forschung wird aus zwei großen Quellen gespeist. Zum einen ist das eine experimentelle Untersuchung des Verhaltens eines realen schwingungsfähigen mechanischen Systems. Das Ziel ist das Erstellen eines plausiblen numerischen Prozess- bzw. System-Modells durch Ermittlung der relevanten Systemeinfluss- und Ausgangsgrößen. Zum anderen sind das die Untersuchungen und die Optimierungsmaßnahmen an diesem Modell, um gewünschte Systemeigenschaften bzw. Funktionalitäten mithilfe eines Optimierungsverfahrens mit anschließender experimenteller Verifikation der Optimierungsergebnisse zu erreichen. Die angestrebten Systemfunktionalitäten lassen sich dabei wie folgt formulieren: Die Messeinrichtung des Reglers eines Linearschwingförderers für Schüttgut soll, mit Hilfe des wiegenden Sensors (Kraftsensor) alleine, bei einem kontinuierlichen Materialfluss den Massenstrom, also sowohl die Masse als auch die Geschwindigkeit des auf dem Förderorgan der Förderanlage bewegenden Gutes, ermitteln. Hierbei wird von einer sensorlosen Erfassung der Geschwindigkeit des Fördergutes gesprochen. Die Idee zur sensorlosen Erfassung der Geschwindigkeit eines konstanten Materialflusses am Linearschwingförderer beruht auf der Auswertung des Zeitsignals des im Systemregler integrierten wiegenden Sensors. Das Zeitsignal im sonst konstanten Signal kommt an dem Sensor aufgrund einer Massendiskontinuität (Massenfehler) zustande, die zu diesem Zweck im homogenen Materialfluss auf dem Förderorgan (Förderrinne) des Förderers absichtlich verursacht wird. Die Erzeugung des Massenfehlers wurden über die Variation des Schwingungsverhaltens der Förderanlage realisiert. Dafür wurden folgende Phänomena in einem mit Vibration belasteten Schüttgut ausgenutzt: Infolge der Veränderung der zugeführten Schwingungsenergie können sich sowohl das Profil des Materialstroms als auch die Dichte (Aggregatzustand1) des zu fördernden Materials verändern. Die Systemantwort auf Variation der Schwingungsenergie in Form des Zeitsignals des wiegenden Sensors wurde mit einem speziellen Auswertungsalgorithmus zur Fördergeschwindigkeit ausgewertet. Die Auswertungsergebnisse fließen neben den Werten der Eingangsparameter des Prozesses in das mathematische Modell ein. Im Folgenden wurde das Modell als ein mehrdimensionales Optimierungsproblem betrachtet und unter Anwendung einer geeigneten Optimierungsmethode zielführend behandelt. Anschließend wurde das ermittelte Optimum messtechnisch validiert. KW - Fördergeschwindigkeit KW - Optimierungsmethode KW - Massenstrom KW - Schüttgut KW - mathematisches Prozessmodell Y1 - 2022 UR - https://publications.rwth-aachen.de/record/849332/files/849332.pdf U6 - https://doi.org/10.18154/RWTH-2022-06734 PB - Rheinisch-Westfälische Technische Hochschule Aachen CY - Aachen ER - TY - CHAP A1 - Batos, Andrej A1 - Beckers, S. A1 - Grüner, S. A1 - Kiel, J. A1 - Jahr, A. A1 - Schniederbruns, B. A1 - Berghaus, A. A1 - Weiß, P. ED - Wissensforum GmbH, VDI T1 - Möglichkeiten und Grenzen eines in einem Feldhäcksler verbauten, elektrisch angetriebenen Wurfbeschleunigers T2 - LAND.TECHNIK 2016: Das Forum für agrartechnische Innovationen Y1 - 2016 SN - 978-3-18-102273-3 U6 - https://doi.org/10.51202/9783181022733-325 VL - VDI-Berichte, 2273 SP - 325 EP - 332 PB - VDI Verlag CY - Düsseldorf ER - TY - BOOK A1 - Jahr, Andreas A1 - Berger, Joachim T1 - Klausurentrainer Technische Mechanik: Aufgaben und ausführliche Lösungen zu Statik, Festigkeitslehre und Dynamik Y1 - 2017 SN - 978-3-658-14782-2 U6 - https://doi.org/10.1007/978-3-658-14783-9 PB - Springer Nature CY - Wiesbaden ET - 4. Auflage ER - TY - CHAP A1 - Batos, Andrej A1 - Jahr, Andreas A1 - Corves, B. T1 - Experimental Investigations for the Characterization of Cutting Processes on Biomaterials [Oralposter] T2 - European Symposium and Exhibition on Biomaterials and Related Areas – Euro BioMAT 2015 Y1 - 2015 ER - TY - GEN A1 - de Carvalho, Raphael A1 - Heinze, Robert A1 - Ille, Fabian A1 - Adam, Mario A1 - Kameier, Frank A1 - Schauenberg, Udo T1 - Verbesserte energetische Prognose von air conomy Modulen. Vergleich zwischen Design of Experiments (DoE) und Dimensionsanalyse (Teil 1) T2 - HLH Lüftung/Klima, Heizung/Sanitär, Gebäudetechnik Y1 - 2012 VL - 63 IS - 8 SP - 24 EP - 28 PB - Springer VDI-Verlag ER - TY - JOUR A1 - Barbashov, Maksim A1 - Gellings, Markus A1 - Özen, Semih A1 - Jahr, Andreas T1 - High-speed wear tests on mower blade from various manufactures using the wear pot methode JF - Agricultural engineering.eu N2 - Rotary mowers are ofen used for forage harvesting in agriculture, as this technology can achieve a high throughput. These knives are therefore exposed to high levels of wear and tear, and will also be ofen changed because of loss of material by bad cutting quality. Thatn is why it is interesting to save costs during manufacturing in spite of a correspondingly long service life. This research records the current manufacturing quality of the mower blades and examines how they behave in comparison. Based on the obtained results, further decisions on the methods, procedures and ways of extending the life of the disc mower blades should be proposed. For the investigations, a test bench based on a wear pot was used. The wear that occurs on the blade is determined using several parameters and compared accordingly. The parameters of the test setup determined as a result of the test can be used for further studies of wear resistance. N2 - Bei der Grünfutterernte in der Landwirtschaft werden häufig Scheibenmähwerke eingesetzt, um einen hohen Durchsatz zu erzielen. Die dabei eingesetzten Messer sind einem hohen Verschleiß ausgesetzt und werden häufig wegen Verschleiß gewechselt, was sich in einer schlechten Schnittqualität widerspiegelt. Daher ist es interessant, bereits im Produktionsprozess Kosten einzusparen, ohne dabei die Lebensdauer der Messer zu beeinträchtigen. Diese Studie erfasst die aktuelle Fertigungsqualität von Mähmessern und untersucht, wie sie sich im Vergleich verhalten. Anhand der Ergebnisse sollen weitere Entscheidungen über Methoden, Verfahren und Wege zur Verlängerung der Lebensdauer von Rotorklingen vorgeschlagen werden. Für die Untersuchungen wurde ein Prüfstand auf der Basis des Verschleißtopfverfahrens verwendet. Der am Messer auftretende Verschleiß wird anhand mehrerer Parameter ermittelt und entsprechend verglichen. Die aus den Untersuchungen gewonnenen Parameter können für weiterführende Verschleißuntersuchungen genutzt werden. KW - Disc mower blades KW - rotary mower KW - slurry pot KW - ellipse-fit method Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-44709 SN - 2943-5641 VL - 79 IS - 2 SP - 95 EP - 115 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e. V. (KTBL) ER - TY - JOUR A1 - Carsten, Stöhr A1 - Monika, Janssen A1 - Jörg, Niemann A1 - Benedikt, Reich T1 - Smart Services JF - Procedia - Social and Behavioral Sciences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59819 SN - 1877-0428 VL - 238 SP - 192 EP - 198 PB - Elsevier ET - SIM 2017 / 14th International Symposium in Managemen ER - TY - JOUR A1 - Grote-Ramm, Wolfgang A1 - Lanuschny, David A1 - Lorenzen, Finn A1 - Oliveira Brito, Marcel A1 - Schönig, Felix T1 - Continual learning for neural regression networks to cope with concept drift in industrial processes using convex optimisation JF - Engineering Applications of Artificial Intelligence N2 - Process models in industrial applications, e.g. predictive maintenance or automation, are subject to both divergence from the underlying system due to their time-variant nature and to high complexity resulting from a wide operational range being covered. Hence, regression models require high accuracy for the present system state and at the same time need to be valid across the whole system operating space. While accuracy for the current system state can be gained by updating the model on the current data, the overall validity must often be retrieved from historical or design data. We propose a method to find an appropriate compromise for these two demands. A pre-trained artificial neural network (ANN) is continually updated on the current sensor data stream using convex optimisation. Thus, a unique and optimal solution is generated in each update step, while robust regression accuracy on the domain that is not covered by the arriving data subset is maintained. This is achieved by introducing a data management system to provide some historical data, constraining the optimisation problem and manipulating the architecture of the ANN. Models updated with this method show reasonable stability but display plastic behaviour at the current operating point. KW - Continual learning KW - Concept drift KW - Catastrophic forgetting KW - Convex optimization Y1 - 2023 U6 - https://doi.org/10.1016/j.engappai.2023.105927 SN - 1873-6769 VL - 120 PB - Elsevier CY - New York ER - TY - JOUR A1 - Batos, Andrej A1 - Ruepp, Maximilian A1 - Jahr, Andreas A1 - Corves, Burkhard T1 - Ermittlung der Biege- und Schnitteigenschaften von Halmgut mit einem Universalprüfstand JF - LANDTECHNIK KW - auto KW - Universalprüfstand KW - Messung KW - Biegeeigenschaften KW - Schnitteigenschaften KW - Halm Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59856 SP - 84 EP - 96 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e.V. ER - TY - CHAP A1 - Jahr, Andreas A1 - Bongartz, Robert A1 - Sim, Hunn A1 - Pillmann, Alex T1 - A Novel Test Method to Determine the Wear Resistance of Agricultural Cutting Tools with an Analyzing Method Based on an Ellipse-Fit Algorithm T2 - Conference Papers in Science N2 - Cutting belongs to the essential techniques in many fields of application in agricultural engineering. Cutting tools in agricultureare exposed to a high amount of abrasive wear and impact stress. Increasing the wear resistance of cuttings tools has a highsignificance for the efficiency and profitability of agricultural machinery. Blunt and deformed blades decrease the energy efficiencyand the cutting quality. Blade failures cause machine breakdowns and increase labor and material costs. To enable a consistent andsystematic optimization of the blades, a suitable testing method is necessary. Conventional field tests do not provide comparableand repeatable results. Therefore, a test method developed at the FMDauto in cooperation with the Ennepetaler Schneid- undM¨ahtechnik (ESM) GmbH & Co. KG is presented. The test bench provides standardized and repeatable conditions with a similarwear pattern which is found during field operations. One of the remaining challenges is a clear wear characterization. Existinganalyzing methods do not consider the energy efficiency and do not determine the edge holding property clearly. In this paper, anew analyzing method based on an ellipse-fit method is introduced to rate the geometrical shape of the cutting edge and examinethe wear resistance of different blade Y1 - 2015 U6 - https://doi.org/10.1155/2015/548238 SN - 2356-6108 N1 - This Conference Paper is based on a presentation given by Hunn Sim at “European Symposium on Friction, Wear, and WearProtection” held from 6 May 2014 to 8 May 2014 in Karlsruhe, Germany VL - 2015 SP - 1 EP - 6 PB - Wiley ER - TY - CHAP A1 - Batos, Andrej A1 - Röger, T. A1 - Diett, D. A1 - Jahr, Andreas A1 - Corves, Burkhard T1 - Ein Beitrag zur Simulation landtechnischer Aggregate T2 - Land.Technik 2014 : Agrartechnik im Dialog mit Politik und Gesellschaft ; Berlin 19. und 20. November 2014 ; [Fachbeiträge der 72. Internationalen Tagung Land.Technik des Fachbereichs Max-Eyth-Gesellschaft Agrartechnik im VDI]= Conference: Agricultural Engineering 2014 / VDI-MEG Y1 - 2014 SN - 978-3-18-092226-3 VL - VDI-Berichte ; 2226 SP - 53 EP - 58 PB - VDI-Verl. CY - Düsseldorf ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Jahr, Stefan A1 - Corves, Burkhard T1 - Entwicklung einer Zykloidenverzahnung für hohe Übersetzungen für die Elektromobilität - Zweistufiges Planetengetriebe mit epizykloidaler Zahnform T2 - Bewegungstechnik 2012 : Koppelgetriebe, Kurvengetriebe und gesteuerte Antriebe im Maschinen-, Fahrzeug-, und Gerätebau ; Nürtingen, 11. und 12. September 2012 / VDI Produkt- und Prozessgestaltung Y1 - 2012 SN - 978-3-18-092175-4 VL - VDI-Berichte ; 2175 SP - 69 EP - 80 PB - VDI Verl. CY - Düsseldorf ER - TY - CHAP A1 - Gaida, Philipp A1 - Jahr, Andreas A1 - Weinberg, Kerstin ED - Dłużewsk, Paweł ED - Jurczak, Grzegorz ED - Young, Toby D. T1 - FEA and experimental validation of an electroactive polymer actuator [Abstract] T2 - Third International Conference on Material Modelling incorporating the Thirteenth European Mechanics of Materials Conference, September 8–11, 2013,Warsaw, Poland Y1 - 2013 SN - 978-83-89687-83-8 IS - 185 PB - Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk CY - Warszawa ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Sim, Hunn A1 - Villena Martínez, Jose David A1 - Zepke, S. T1 - Eine neuartige Methode zur Bestimmung der Verschleissfestigkeit von Hackslermessern T2 - Mit Erfahrung und Innovationskraft zu mehr Effizienz: Land.Technik 2012, Conference: Agricultural Engineering, Karlsruhe 6. und 7. November 2012 Y1 - 2012 SN - 9783180921730 SN - 0083-5560 VL - 2173 SP - 263 EP - 270 PB - VDI-Verlag CY - Düsseldorf ER - TY - JOUR A1 - Gaida, Philipp A1 - Weinberg, Kerstin A1 - Jahr, Andreas T1 - Viscoelastic modelling and experimental results of a dielectric electro-active polymer diaphragm actuator JF - Proceedings in Applied Mathematics and Mechanics (PAMM) Y1 - 2014 U6 - https://doi.org/10.1002/pamm.201410225 SN - 1617-7061 VL - 14 IS - 1 SP - 475 EP - 476 PB - Wiley ET - 85th Annual Meeting of the GAMM. March 10th – 14th, 2014, Erlangen ER - TY - JOUR A1 - Shajahan, Mohamed Iqbal A1 - Benim, Ali Cemal T1 - Granular PCM based heat sink for electronics thermal management JF - Applied Thermal Engineering N2 - This study investigates aluminum heat sinks integrated with GR42 phase change material (PCM), aiming to enhance thermal inertia and stabilize device temperatures. This is important, since the increasing miniaturization and performance demands for electronic devices have led in a growing need for advanced thermal management systems capable of handling rapid transient loads. The novelty of the work lies in examining different heat sink layouts that optimize the heat dissipation capabilities of GR42 PCMs while minimizing size and weight for electronic cooling. The experimental testing was conducted using three configurations, namely no fin, circular fin and hexagonal fin, with three input powers (4 W, 8 W, and 12 W). The experimental results show that the hexagonal-fin heat sink, surface area is 25 % more than circular fins, exhibited superior thermal performance without significant variation in input power. Notably, the hexagonal-fin heat sink achieved the desired set point temperature of 55 ◦C in 33 % less time than the circular-fin design and 45 % less time than the heat sink without fins. Furthermore, the peak temperatures increased up to 21 % for circular fins. During the charging cycles, the enhancement ratios vary from 72 % and begin to narrow to 25 % during discharge cycles. The hexagonal-fin configuration also exhibited superior melting dynamics, completing the phase transition 44 % faster at higher input power than the circular fins, and established a thermal deviation of nearly 51 % less than finless heat sinks. These findings underscore the critical role of fin geometry and PCM integration in achieving uniform temperature distribution and improved energy storage efficiency. Overall, the hexagonal-fin heat sink with GR42 PCM shows strong potential as a passive cooling solution for low-power portable electronic devices. KW - Heat sinks KW - Portable electronic cooling KW - Latent heat storage KW - GR42 PCM KW - Hexagonal fin KW - Circular fin KW - HSD Publikationsfonds KW - DFG Publikationskosten Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59649 SN - 1359-4311 VL - 286 PB - Elsevier ER - TY - JOUR A1 - Jahr, Andreas A1 - Corves, Burkhard A1 - Batos, Andrej A1 - Schumacher, Mathias T1 - Simulation landtechnischer Schnitt- und Strömungsprozesse JF - agricultural engineering.eu N2 - Der Einsatz moderner Simulationsverfahren beschränkt sich im Bereich der Landmaschinenentwicklung in der Regel auf Anwendungen, die aus der Automobiltechnik bekannt sind. Darüber hinaus könnten diese Verfahren auch im Rahmen der Auslegung von Erntemaschinen hinsichtlich des Ernteprozesses einen maßgeblichen Beitrag zur weiteren Ressourcenschonung und Energieverbrauchsminderung leisten. Im Folgenden wird ein Ansatz zur Simulation erntetechnischer Schnittprozesse mit Hilfe der Mehrkörpersimulation (MKS) vorgestellt. Ferner soll die Anwendung der Strömungssimulation (CFD) am Beispiel eines Schlegelhäckslers gezeigt werden. KW - Strömungssimulation (CFD) KW - Mehrkörpersimulation (MKS) KW - Mähdrescherhäcksler KW - Schnittprozess Y1 - 2010 U6 - https://doi.org/10.15150/lt.2010.518 SN - 2943-5641 N1 - Diese Veröffentlichung beruht auf den Ergebnissen eines ProInno II-Projektes [1], das vom BMWi gefördert wurde und in Zusammenarbeit mit der Ennepetaler Schneid- und Mähtechnik GmbH & Co. KG (www.esm-ept.de) entstand VL - 65 IS - 5 SP - 372 EP - 375 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e. V. (KTBL) ER - TY - CHAP A1 - Jahr, Andreas A1 - Corves, B. A1 - Batos, Andrej A1 - Wenzel, O. T1 - Abbildung und Analyse von Schnittprozessen mit Hilfe der Mehrkörper- und Strömungssimulation – Modellierung eines Mehrkörper-Teilungsprozesses und Ermittlung der erforderlichen Antriebsleistung eines Häckslers T2 - Landtechnik regional und international: Land-Technik 2008, Tagung Stuttgart-Hohenheim, 25. und 26. September 2008 KW - Landtechnik Y1 - 2008 SN - 9783180920450 VL - VDI-Berichte ; 2045 SP - 247 EP - 255 PB - VDI-Verl. CY - Düsseldorf ER - TY - BOOK A1 - Bongartz, R. A1 - Trofimov, Igor A1 - Jahr, Andreas ED - Pohl, Michael T1 - Optimierung der Zeitfestigkeit geschweißter rotationssymmetrischer Bauteile durch Randschichtverfestigung der Schweißzone T3 - Konstruktion, Werkstoffentwicklung und Schadensanalyse : [Tagung Werkstoffprüfung 2010, 02. und 03. Dezember 2010 in Neu-Ulm] KW - Werkstoffprüfung Y1 - 2010 SN - 9783514007789 SP - 131 EP - 136 PB - Verlag Stahleisen CY - Düsseldorf ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej ED - Corves, Burkhard T1 - Mehrkörpermechanik-Anwendungen in der Landtechnik T2 - 8. Kolloquium Getriebetechnik Aachen 2009 Y1 - 2009 SN - 978-3-86130-984-0 SP - 287 EP - 296 PB - Mainz CY - Aachen ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Sim, Hunn A1 - Villena Martínez, Jose David T1 - A New Approach for Measuring the Wear Resistance of Cutter Blades T2 - International Conference of Agricultural Engineering – CIGR-AgEng2012, Valencia/Spanien, 8.-12.07.2012 Y1 - 2012 ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Pillmann, A. A1 - Hoppe, S. A1 - Diett, D. T1 - Determining the Cutting Properties of Agricultural Products T2 - International Conference of Agricultural Engineering – CIGR-AgEng2012, Valencia/Spanien, 8.-12.07.2012 Y1 - 2012 ER - TY - CHAP A1 - Gaida, Philipp A1 - Jahr, Andreas A1 - Weinberg, Kerstin T1 - Preliminary survey of a diaphragm EAP stack for the use as an actuator in a water valve T2 - 14th International Workshop on Research and Education in Mechatronics 6th-7th June 2013 Y1 - 2013 ER - TY - JOUR A1 - Scherpen, F. A1 - Draghici, Anca A1 - Niemann, Jörg T1 - Customer Experience Management to Leverage Customer Loyalty in the Automotive Industry JF - Procedia - Social and Behavioral Sciences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-25198 SN - 1877-0428 N1 - PII: S1877042818300442 VL - 238 SP - 374 EP - 380 PB - Elsevier ET - 14th International Symposium in Management, Challenges and Innovation in Management and Entrepreneurship, 27-28 October 2017 ER - TY - JOUR A1 - Dehmer, Joanna A1 - Niemann, Jörg T1 - Value Chain Management Through Cloud-based Platforms JF - Procedia - Social and Behavioral Sciences N2 - The transformation of traditional value chain processes towards a digital value chain management enables companies to sustainably establish and retain a competitive market position. Digitisation offers the opportunity to design and operate expansive process chains with efficient process operations via co-operative platforms. Increased customer loyalty („lock-in“) via integrated measures at the front-end raises utilization and planning certainty for the technological recovery system. KW - Value Chain Management KW - cloud-based platform KW - digitization Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-25126 UR - 1877-0428 N1 - PII: S1877042818300211 VL - 238 SP - 177 EP - 181 PB - Elsevier ET - SIM 2017: 14th International Symposium in Management, Challenges and Innovation in Management and Entrepreneurship, 27-28 October 2017, Timisoara, Romania ER - TY - RPRT A1 - Bhaiya, Madhur A1 - Jahr, Andreas A1 - Happel, Holger T1 - Harvesting-Combine-Flow Simulation Technique N2 - CFX 11.0 is a Computational Fluid Dynamics (CFD) program for simulating the behavior of systems involving fluid flow, heat transfer, and other related physical processes. It works by solving the equations of fluid flow (in a special form) over a region of interest, with specified (known) conditions on the boundary of that region. This tool is used here to analyse the straw cutter which is used to comminute the straw which is left standing in the field after stripper header has stripped the grains from the crops. Stripper Header is a new technique different to conventional harvester machines and it is still under development and testing. It works on the principle in which grains are first stripped off from the head of the standing crop which helps in much reduced intake freeing up the separation systems to handle a larger volume of grains. But with this, the new problem of the disposal of the long, uncut straw left after stripping of grains arose. So a straw cutter is used after the stripper header stage in this Combine Harvester, where the rotor is equipped with pressed steel blades and rotates towards the crop, i.e., it cuts and lifts the straw over the top. This technique is environment friendly because previously farmers would have to burn the long, uncut straw standing in the fields while in this case mulched straw can be used for min-till systems. This rotor based straw cutting machine is analysed here which helps us in increasing power efficiency and comminution rate and quality of cut straw particles. Here fluid flow simulation has been preferred over particle simulation: - CFX 10.0 tool is not very effective for particle simulation techniques and computation time is increased considerably. - It’s very hard to realize particle simulation in CFX 10.0 because we have to define size and properties of each particle and besides this wall conditions would have to be defined differently for every boundary. - Besides this, it’s hard to realize cutting effect with straw particles in CFX 10.0 which otherwise would be comminuted in real life conditions. - The results obtained from fluid simulation are validated using experimental results and found to be nearly the same which clearly contradicts any need of performing particle simulation. KW - Häckseln KW - Ernte KW - Stroh KW - Partikelstrom KW - CFD KW - chaff KW - harvesting KW - Particle flow KW - simulation KW - FHD Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4239 CY - Düsseldorf ER - TY - RPRT A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Happel, Holger T1 - Modellierung eines Strohhalmes in einem Mehrkörpersimulationsprogramm T1 - Modeling of a Wheat Straw by Means of a Multi Body Simulation Program N2 - Im Rahmen dieser Ausarbeitung wird gezeigt, wie ein Weizenstrohhalm in dem Mehrkörpersimulationsprogramm SIMMECHANICS, das ein Zusatztool des Simulations- und Berechnungsprogramms MATLAB(R) bzw. SIMULINK(R) ist, modelliert werden kann. Die Modellierung erfolgt mit dem Ziel, den im Mähdrescherhäcksler stattfindenden Schnittprozess zu simulieren. Dazu werden zuerst die für einen Schnitt relevanten Eigenschaften des Weizenstrohhalmes ermittelt. Dies sind insbesondere die Halmmasse sowie die Winkelfeder- und Winkeldämpfungskonstante. Anschließend wird die Modellierung des Halmes in dem genannten Mehrkörpersimulationsprogramm gezeigt. Abschließend erfolgt ein Vergleich des erstellten Simulationsmodells mit dem realen Strohhalm. N2 - The present paper investigates into the technique of modeling a wheat straw using the multi body simulation program SIMMECHANICS being an add-on of the simulation and calculation program MATLAB(R) or SIMULINK(R) respectively. Modeling of the straw aims at simulating the cutting process taking place inside a combined harvester. Step one identifies meaningful data concerning the characteristics of the straw with respect to the cutting process, in particular blade mass, angle resilience- and angle damping constant. Step two shows how modelling of the straw is performed using SIMMECHANICS. The final chapter compares the simulation model with the behaviour of a typical straw as found in nature. KW - Simulation KW - Erntetechnik KW - Häcksler KW - Messung KW - Land- und Agrartechnik KW - simulation KW - harvest KW - crop chopper KW - measurement KW - agricultural technology KW - FHD Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-3624 CY - Düsseldorf ER - TY - JOUR A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Happel, Holger A1 - Corves, Burkhard T1 - Mehrkörpersimulation eines Schnittprozesses JF - LANDTECHNIK N2 - Es wird gezeigt, wie ein Schnittprozess aus dem Bereich der Erntetechnik mit dem Mehrkörpersimulationsprogramm SimMechanics simuliert werden kann. Ziel ist es, im Rahmen des Forschungsvorhabens eine Grundlage zu schaffen für die virtuelle Bestimmung der erforderlichen Antriebsleistung und Optimierung von Mähdrescherhäckslern hinsichtlich einer nachhaltigen und Ressourcen schonenden Leistungssteigerung. KW - Erntetechnik KW - Schnittprozess KW - Simulation KW - Harvest technology KW - cutting process Y1 - 2008 U6 - https://doi.org/10.15150/LT.2008.822 VL - 63 IS - 4 SP - 218 EP - 220 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e.V. ER - TY - CHAP A1 - Kiel, Jürgen A1 - Jahr, Andreas A1 - Becker, Sebastian A1 - Ingenlath, Philipp A1 - Quarz, Dieter A1 - Gaida, Philipp A1 - Villena Martínez, Jose David ED - Bertram, Torsten ED - Corves, Burkhard ED - Janschek, Klaus T1 - Entwicklung eines aktiven, individualisierten elektromotorischen Kraft-/ Cardio Trainingsgerätes T2 - Fachtagung Mechatronik 2013 : Aachen, (06.03. - 08.03.2013) KW - Industrieroboter KW - Simulation KW - Regelungstechnik KW - Sensortechnik KW - Handhabungstechnik KW - Elektromechanisches Gerät KW - Kraftfahrzeugtechnik KW - Modellierung KW - Mechatronik KW - Aktorik Y1 - 2013 SN - 3-86130-958-0 SP - 289 EP - 292 PB - Aachen ER - TY - CHAP A1 - Hüsen, Jonsa A1 - von Berg, Markus A1 - Steffens, Jochen T1 - Evaluating the Effectiveness of Virtual Listening Tests for Balanced Armature Headphone Drivers T2 - AES International Conference on Headphone Technology 2025 August 27–29, Espoo, Finland Y1 - 2025 UR - https://aes.org/publications/elibrary-page/?id=22929 IS - 3 PB - Audio Engineering Society ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej T1 - Kinematic Simulation of a loaded Truck Skip Loader – Kinematic and Kinetic Analysis of Mechanisms T2 - Seminar: Simulation Driven Design : potential and challenges ; 12th - 13th March 2008, Wiesbaden Y1 - 2008 SN - 9781874376347 SP - 1 EP - 13 ER - TY - CHAP A1 - Jahr, Andreas A1 - Sim, H. A1 - Batos, Andrej A1 - Molla, G. A1 - Berk, V. A1 - Villena Martínez, J. D. T1 - A novel method to examine the abrasive and impact stress behavior of agricultural blades T2 - VII Congreso Ibérico de Agroingeniería y Ciencias Hortícolas: innovar y producir para el futuro. Libro de actas N2 - Cutting of stalk material is a core process within the whole harvesting period. During the entire harvesting, every stalk is cut at least one time. For other agricultural processes, such as grain crop harvesting or mulching of brownfields, cutting processes belong also to the main techniques. They have a significant influence on the efficiency and profitability of agricultural machines. Minimizing wear has a high level of importance regarding an environmental friendly and resource efficient agriculture. Wear during agricultural cutting processes is mainly caused due to abrasion and impact stress. Blunt and deformed blades affect the energy efficiency and the cutting quality. The increase of fuel consumption and frequent machine breakdowns with an involvement of high labor and material costs generate considerable economic losses. A consequent, methodical optimization of the wear behavior of the blades can offer a high saving potential of ecological and economic resources. The blade geometry, base material and heat respectively surface treatment substantially determine the wear resistance. Under technological and economic considerations these parameters have to be optimized. Therefore, a test method has been developed at the FMDauto in cooperation with the Ennepetaler Schneid- und Mähtechnik (ESM) GmbH & Co KG. The test bench enables to test different blades of agricultural machines under standardized and repeatable conditions. This paper presents the test bench and the results of several wear tests. The examinations of the abrasive wear and the impact stress on cutter blades are shown. Algorithms developed at FMDauto are used to analyze the results. It is carried out that further developments of the analyzing methods to describe the sharpness and disruptions of cutter blades are reasonable. Y1 - 2014 SN - 978-84-695-9055-3 SP - 854 EP - 859 ER - TY - JOUR A1 - Sulaiman, Mohammed A. A1 - Saber, Hindren Ali A1 - Hasan, Hasan F. A1 - Benim, Ali Cemal T1 - Latent heat cold storage integrated direct evaporative cooler: A neoteric practical design for energy and water saving potential with thermal comfort improvement JF - Journal of Energy Storage KW - Latentwärmespeicher KW - Verdunstungskühlung KW - Energieeinsparung KW - Wassereinsparung Y1 - 2026 U6 - https://doi.org/10.1016/j.est.2025.119612 SN - 2352-152X VL - 143 PB - Elsevier ER - TY - CHAP A1 - Siekmann, Leonard A1 - Steed, Clint Alex A1 - Mangaroo-Pillay, Mia A1 - Niemann, Jörg A1 - Fussenecker, Claudia T1 - Identifying the Industry 4.0 Skills Gap: A Comparative Analysis of Vocational Training in South Africa and Germany T2 - Advancing Learning Factories: Enabling Future-Ready Skills. Proceedings of the 15th Conference on Learning Factories 2025, Volume 1 KW - Industrie 4.0 KW - Berufliche Qualifikation KW - Deutschland KW - Südafrika Y1 - 2025 SN - 9783031988790 U6 - https://doi.org/10.1007/978-3-031-98880-6_26 SN - 2367-3370 VL - Lecture Notes in Networks and Systems, Bd. 1545 SP - 212 EP - 222 PB - Springer Nature CY - Cham ER - TY - JOUR A1 - Mandal, Dipak Kumar A1 - Manna, Nirmal K. A1 - Biswas, Nirmalendu A1 - Rudra, Tansu A1 - Kumar, Rajesh A1 - Benim, Ali Cemal T1 - Enhanced heat transport in magneto-nanofluidic thermal systems: adiabatic block effects in grooved channels and ANN modeling JF - International Journal of Thermofluids N2 - This study investigates heat transfer enhancement in magneto-nanofluidic systems through the strategic placement of adiabatic blocks in grooved channels. Using CuO–H2O nanofluid in a bottom-heated channel with circular expansion, we examine the complex interactions between forced convection, magnetic fields, and uoyancy effects. Through systematic numerical analysis, we explore the combined influences of Rayleigh, Reynolds, and Hartmann numbers on thermal performance. Our findings reveal significant heat transfer enhancement (up to 137 %) under optimal conditions, particularly with vertical magnetic field orientation at Re = 100 and Ha = 30. The results demonstrate how adiabatic blocks modify flow structures, with larger blocks diminishing vortex intensity while elevated Ra generates secondary vortices that interact with primary circulations. Magnetic field effects show notable dependence on orientation, with vertical fields generally promoting better heat transfer than horizontal configurations. To complement the numerical analysis, we develop a predictive model using Artificial Neural Network (ANN) for Nusselt numbers across various operating conditions, achieving over 99 % accuracy. The integrated computational-ANN approach offers significant advancements in optimizing thermal systems in various areas, ranging from electronics cooling to microfluidic devices. KW - Mixed convective flow KW - Nanofluids KW - Heat transfer augmentation KW - Adiabatic block KW - Grooved channel KW - Neural network KW - HSD Publikationsfonds Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-60127 SN - 2666-2027 VL - 31 PB - Elsevier ER - TY - JOUR A1 - Bergmann, Marie A1 - Haddad-Thoelke, Pascale A1 - Jeong, Haeran A1 - Kappeler, Ron A1 - Altug, Hicran A1 - Oberwinster, Lukas A1 - Boogaard, Hanna A1 - Pohl, Tobias A1 - Soppa, Vanessa A1 - Ogurtsova, Katherine A1 - Joss, Meltem Kutlar A1 - Andersen, Zorana Jovanovic A1 - Hoffmann, Barbara T1 - Systematic review and meta-analysis on the health effects of long-term exposure to ultrafine particles JF - European Respiratory Review N2 - Background Ultrafine particles (≤100 nm diameter) may have a higher toxicity than larger particles but are still not regulated nor part of routine air pollution monitoring. So far, health effects of long-term exposure to ambient ultrafine particles are not well understood, owing to a lack of exposure data and epidemiological studies. Methods We conducted a systematic review and meta-analysis on the health effects of long-term exposure to ultrafine particles, including studies published until December 2024. A meta-analysis was conducted for outcomes with at least four available effect estimates. Confidence in the body of evidence was evaluated using the Office of Health Assessment and Translation method. Results We identified 85 studies investigating various mortality, morbidity and subclinical outcomes. In meta-analyses of single-pollutant models, we found positive associations with natural mortality (hazard ratio 1.06, 95% CI 1.04–1.08) and C-reactive protein (10.14% increase (95% CI −0.51–21.99%) per 10 000 pt·cm−3 increase in long-term exposure to ultrafine particles, with low and inadequate levels of evidence, respectively. The remaining studies revealed overall limited evidence for adverse effects on a wide range of outcomes. Less than half of the studies adjusted for co-pollutants. Conclusion The evidence base on long-term health effects of ultrafine particles has increased substantially in the past decade, while the overall evidence for independent effects of long-term ultrafine particle exposure remains inadequate to low. More studies are needed to draw firm conclusions about the independent adverse effects of long-term ultrafine particles on various health end-points, with a special focus on the influence of co-pollutant adjustment. KW - Luftreinhaltung KW - Schadstoffbelastung KW - Luftverunreinigender Stoff KW - Feinstaub KW - Auswirkung Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-60272 SN - 1600-0617 VL - 35 IS - 179 PB - European Respiratory Society ER - TY - GEN T1 - 1045 - Vierte Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Umweltingenieurwesen“ an der Hochschule Düsseldorf vom 18.02.2026 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 1045 KW - Amtliche Mitteilungen Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-60857 CY - Düsseldorf ER - TY - GEN T1 - 1044 - Erste Satzung zur Änderung der Prüfungsordnung für den Bachelorstudiengang Haus-, Energie- und Anlagentechnik (HEAT) an der Hochschule Düsseldorf vom 18.02.2026 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 1044 KW - Amtliche Mitteilungen Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-60846 CY - Düsseldorf ER - TY - INPR A1 - Deckert, Carsten A1 - Schomaker, Rahel M. A1 - Grasmik, Jeanna T1 - Universalism and Innovation: The Influence of Impartiality and Inclusiveness on National Innovativeness T2 - Queios N2 - The innovative capacity of a country is a key factor in its economic development. While classical approaches primarily emphasize technological and economic aspects, cultural and moral influences are increasingly coming into focus in research. In particular, the treatment of out-groups and the intensity of in-group preferences play a crucial role, as expressed in the societal contrast between social cohesion and individual freedom. A central aspect of this debate is the moral dimension, particularly the tension between universalism, relativism, and particularism. This study examines the impact of universalism on a country's innovativeness by situating the concept within cultural theory and analyzing it empirically. The findings provide new insights into the relationship between cultural values and innovation potential with regard to moral capital in a society. Y1 - 2026 U6 - https://doi.org/10.32388/KNI4FN PB - Qeios Ltd ER - TY - CHAP A1 - Reich, Marius A1 - Patrick, Rathjen A1 - Adam, Mario ED - Lund, Henrik ED - Mathiesen, Brian Vad ED - Østergaard, Poul Alberg ED - Thellufsen, Jakob Zinck ED - Brodersen, Hans Jørgen T1 - Harnessing Machine Learning for Rapid Optimization: Integration of Time Series Data into Prior Approximation of Energy System Simulations T2 - Book of Abstracts :10th International Conference on Smart Energy Systems KW - SmartPrior KW - Energy supply systems KW - Rule based simulation KW - Design Optimization KW - Metamodeling KW - Time Series Data Y1 - 2024 UR - https://vbn.aau.dk/ws/portalfiles/portal/749867139/SESAAU2024_Book_of_Abstracts.pdf PB - Aalborg University CY - Aalborg ER - TY - CHAP A1 - Reich, Marius A1 - Rathjen, Patrick A1 - Adam, Mario ED - Henrik, Lund ED - Brain Vad, Mathiesen ED - Østergaard, Poul Alberg ED - Thellufsen, Jakob Zinck ED - Brodersen, Hans Jørgen T1 - Precomputed ML Surrogates for Energy System Design: Methodology and In-Depth Evaluation T2 - Book of Abstracts 2025: 11th International Conference on Smart Energy Systems, 16-17 September 2025. Copenhagen KW - SmartPrior KW - Energy supply systems KW - Design Optimization KW - Metamodeling KW - Time Series Data Y1 - 2025 UR - https://vbn.aau.dk/ws/portalfiles/portal/796346412/SESAAU2025_Book_of_Abstracts.pdf PB - Aalborg University CY - Aalborg ER - TY - CHAP A1 - Gottschald, Jonas A1 - Reich, Marius A1 - Adam, Mario ED - Lund, Henrik ED - Mathiesen, Brian Vad ED - Østergaard, Paul Alberg ED - Brodersen, Hans Jørgen T1 - Lessons Learned: On the Potentials and Challenges of a Model Predictive Controlled DHN Heat Supply T2 - Book of Abstracts: 9th International Conference on Smart Energy Systems. Aalborg Universitet KW - District Heating KW - Machine Learning KW - Model Predictive Control KW - Monitoring KW - BestHeatNet Y1 - 2023 UR - https://vbn.aau.dk/ws/portalfiles/portal/548360793/BoA-2023FINAL-2.pdf SP - 87 EP - 87 PB - Aalborg University CY - Aalborg ER - TY - CHAP A1 - Reich, Marius A1 - Prusas, Benedikt A1 - Adam, Mario ED - Lund, Henrik ED - Mathiesen, Brian Vad ED - Østergaard, Paul Alberg ED - Brodersen, Hans Jørgen T1 - Prior-Approximation of Rule-Based Energy System Simulation for Fast Design Optimization T2 - Book of Abstracts: 9th International Conference on Smart Energy Systems. Aalborg Universitet KW - Energy supply systems KW - Rule based simulation KW - Design Optimization KW - Metamodeling KW - SmartPrior Y1 - 2023 UR - https://vbn.aau.dk/ws/portalfiles/portal/548360793/BoA-2023FINAL-2.pdf PB - Aalborg University CY - Aalborg ER - TY - JOUR A1 - S, Kasiviswanathan A1 - Shajahan, Mohamed Iqbal A1 - R, Bharathiraja A1 - Murali, Arun Prasad A1 - Benim, Ali Cemal T1 - Comprehensive overview of phase change materials in electronics, building, and solar applications JF - Engineering Research Express N2 - Phase change materials (PCMs) are a viable way to improve energy efficiency and thermal control in a variety of sectors. With an emphasis on their function in thermal control, this review article offers an in-depth review of PCM applications in electronics, buildings and solar energy systems. PCMs are used in electronics to control device temperatures, which lowers the risk of overheating and increases operational efficiency by 10% to 25%. Through latent heat storage and release in reaction to temperature changes, PCMs are incorporated into walls, floors, and roofs in building applications to improve thermal comfort and cut energy use by 15% to 30%. By storing thermal energy for steady power generation, PCMs increase the dependability and efficiency of solar energy systems by 8%–20%. This review examines the basic ideas behind PCMs, assesses various PCM (such as organic, inorganic, and eutectic PCMs), and details about real-world applications in these energy management fields. Important issues are examined, such as material compatibility, cost-effectiveness, and long-term stability. In order to maximize performance in these crucial applications, the conclusion emphasizes the need for improvements in cost-effective PCM formulations for the improved thermal conductivity (0.2–0.7 W m−1·K−1), and adaptive control systems. KW - Energieeffizienz KW - Temperaturregelung KW - Elektronik KW - Latentwärmespeicher KW - Sonnenenergie Y1 - 2026 U6 - https://doi.org/10.1088/2631-8695/ae342a SN - 2631-8695 VL - 8 IS - 3 PB - IOP Publishing ER - TY - THES A1 - Münch, Justin T1 - Mehrwert von Methoden des Maschinellen Lernens für die simulative Bewertung der Versorgungssicherheit mit Elektrizität N2 - Politik und Wirtschaft sind auf eine fundierte, schnelle und flexible Bewertung der Ver-sorgungssicherheit mit Elektrizität als Grundlage strategischer Entscheidungen angewiesen. Dazu werden komplexe probabilistische Simulationsmodelle unter Einbeziehung einer hohen Anzahl möglicher Zukunftsszenarien verwendet. Allerdings schränken die langen Rechenlaufzeiten von mehreren Stunden pro Szenario die Analysetiefe ein. Zudem werden die Analysen durch die Prognose der zeitlich aufgelösten zukünftigen Randbedingungen erschwert. Die vorliegende Arbeit zeigt, dass sich mit Methoden aus dem Bereich des Maschinellen Lernens (ML) in Kombination mit angepassten Methoden des Design of Experiments die Kennzahlen der Versorgungssicherheit mit Elektrizität aus einem komplexen Simulationsmodell auf Basis rekursiver Faltungen sehr gut approximieren lassen. Die Zeitreduktion im Vergleich zum nativen Simulationsmodell ist sehr hoch, bei gleichzeitig hoher Genauigkeit. Auch im Bereich der Prognose zeitlich aufgelöster Randbedingungen demonstrieren die Ergebnisse ein erhebliches Verbesserungspotenzial von ML-Methoden im Vergleich zu klassischen Verfahren. Zusammengefasst sind die untersuchten und vorgeschlagenen ML-Methoden in der Lage, die Versorgungssicherheit mit Elektrizität komplexitätsgerecht (tausende von Zukunftsszenarien) in praktikabel kurzer Zeit (weniger als eine Stunde) detailliert zu analysieren. N2 - Politics and economics rely on a well-founded, rapid and flexible assessment of electricity supply security as a basis for strategic decisions. Complex probabilistic simulation models incorporating a large number of possible future scenarios are used for this purpose. However, the long simulation runtimes of several hours per scenario limit the depth of analysis. In addition, the analyses are complicated by the forecasting of time-resolved future boundary conditions. This work demonstrates that machine learning (ML) methods, combined with adapted Design of Experiments (DoE) techniques, allow for a highly accurate approximation of electricity supply security metrics obtained from a complex simulation model based on recursive convolutions. The time reduction compared to the native simulation model is very high, while maintaining a high degree of accuracy. In the area of forecasting time-resolved boundary conditions, the results also demonstrate that ML methods offer considerable potential for improvement over classical methods. In summary, the investigated and proposed ML methods are capable of performing a detailed analysis of the security of electricity supply that is commensurate with its complexity (thousands of future scenarios) within a practical amount of time (less than an hour). T3 - Promotionskolleg NRW mit Hochschule Düsseldorf - 1 KW - Deep Learning KW - Machine Learning KW - Artificial neural networks KW - Metamodeling KW - Surrogate modeling KW - Probabilistic simulation KW - Regression KW - Security of electricity supply KW - times series forecasting Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-58306 N1 - Bochum, Dissertation, Promotionskolleg NRW mit Hochschule Düsseldorf PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - GEN T1 - 1059 - Gleichstellungsquoten für die Fachbereiche Architektur, Design, Elektro- und Informationstechnik, Maschinenbau und Verfahrenstechnik, Medien und Wirtschaftswissenschaften der Hochschule Düsseldorf gemäß § 37a HG vom 31.03.2026 N2 - Gemäß § 37a des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz – HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat das Präsidium im Einvernehmen mit der jeweiligen Dekanin bzw. dem jeweiligen Dekan die folgenden Gleichstellungsquoten (Gender-Diversity-Faktoren; § 3 Berufungsordnung der HSD vom 04.10.2016) für die Dauer von drei Jahren ab dem 01.01.2026 festgesetzt: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 1059 KW - Amtliche Mitteilungen Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-61318 CY - Düsseldorf ER -