TY - RPRT A1 - Failing, Luisa A1 - Kaluza, Stefan A1 - Strucks, Peter T1 - Power2Gas - Katalytische Methanisierung von CO₂ als Baustein einer erfolgreichen Energie- und Rohstoffwende N2 - Die katalytische Methanisierung von Kohlendioxid (CO2) mit Hilfe von elektrolytisch erzeugtem Wasserstoff (H2) aus erneuerbaren Energiequellen kann einen wichtigen Beitrag zur Reduktion von CO2-Emissionen leisten. Aufgrund einer immer stärker fluktuierenden Energie- und Rohstoffbereitstellung spielt die Möglichkeit einer flexiblen, dynamischen Betriebsweise eine zunehmend große Rolle für zukünftige Technologien. Dies bedingt auch im Fall der katalytischen Methanisierung umfangreiche Untersuchungen, um zu ermitteln, inwieweit eine dynamische Fahrweise Auswirkungen auf Prozess und Katalysator besitzt. An diesem Punkt setzte das HiFF-Projekt Power2Gas an. So wurden verschiedene nickelbasierte Katalysatorsysteme synthetisiert, wobei sich der via Imprägnierung hergestellte Ni/Al2O3-Katalysator sowohl aufgrund seiner guten Leistung als auch der praktikablen und reproduzierbaren Herstellung als geeignetes Benchmark-System für weitere Untersuchungen - vor allem im kinetischen Bereich - erwies. Während umfassender Parametervariationen wurden kinetische Datensätze im stationären Zustand bestimmt, die zur Modellierung der katalysierten CO2-Methanisierung verwendet werden können. Darüber hinaus wurden in ausgewählten Versuchsreihen die isotherme Temperaturkontrolle und eine ausreichende Langzeitstabilität sichergestellt sowie makrokinetische Diffusionsbeschränkungen ausgeschlossen. Die Ergebnisse wurden in einer peer-review-Publikation veröffentlicht und auf zwei Konferenzen präsentiert. Sie waren zudem die Basis für eine erfolgreiche Masterarbeit und flossen in die Antragstellung im Rahmen des DFG-Programms „Großgeräteaktion für Hochschulen für Angewandte Wissenschaften“ ein. N2 - The catalytic methanation of carbon dioxide (CO2) using electrolytically produced hydrogen (H2) from renewable energy sources represents a potential option for reducing CO2 emissions. Due to an increasingly fluctuating availability of energy and raw materials, the need for flexible, dynamic operation is becoming ever more crucial for future technologies. In the case of catalytic methanation, this also requires further investigations to determine the impact of dynamic operation on the process and catalysts. This is where the HiFF Power2Gas project comes in. Various nickel-based catalyst systems were synthesized. The Ni/Al2O3 catalyst produced via impregnation was identified as a suitable benchmark system for further investigations - particularly in the kinetic range - due to its good performance as well as its simple and reproducible synthesis. By thorough parameter variation, kinetic data sets were determined in steady state, which can be used to model catalyzed CO2 methanation. In addition, isothermal temperature control and long-term stability were ensured in a series of selected experiments, while macro-kinetic diffusion limitations could be ruled out. The results were published in a peer-reviewed publication and presented at two conferences. They were also fundamental for a successful master's thesis and were used in an application for the DFG program "Großgeräteaktion für Hochschulen für Angewandte Wissenschaften". T3 - Berichte zu HSD-intern geförderten Forschungsprojekten - 4 KW - Dekarbonisierung KW - Dynamische Betriebsweise KW - Nickel-Katalysator KW - Deaktivierung KW - Power-to-X KW - CO₂ Methanisierung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-45143 SN - 2625-3690 CY - Düsseldorf ER - TY - CHAP A1 - Schnieringer, Cédric A1 - Kameier, Frank T1 - Normgerechte Nachbildung analoger Terzfilter mit digitaler Technik – ein Auslaufmodell? [Vortrag] T2 - DAGA 2024 - 50. Jahrestagung für Akustik, 18.-21. März 2024, Hannover Y1 - 2024 UR - https://pub.dega-akustik.de/DAGA_2024/files/upload/start/DAGA2024_proceedings_manuscripts.pdf SN - 9783939296225 SP - 399 EP - 402 PB - Deutsche Gesellschaft für Akustik e.V. CY - Berlin ER - TY - RPRT A1 - Polklas, Thomas A1 - Willeke, Tobias A1 - Lehmbrinck, Marc A1 - Fomina, Anastasia A1 - Maqueo Martinez, Manuel Ernesto A1 - Oliveira Brito, Marcel T1 - RoboFlexRobuste Turbomaschinen für den flexiblen Einsatz: Numerische und experimentelle Untersuchungen zu einem axial-radial Turbinendiffusor (AP 1.5); KI-basierte, modellprädiktive Turbostrang-Regelung für einen energieoptimalen Betrieb (AP 4.2) (Abschlussbericht Verbundprojekt AG Turbo Teilvorhaben-Nr. 1.5 und 4.2) N2 - In der Zusammenarbeit zwischen dem ITSM der Universität Stuttgart und Everllence wurde im Rahmen dieses Vorhabens (AP 1.5) eine Versuchsanlage zur Erzeugung repräsentativer Diffusorströmungen entwickelt und für experimentelle Untersuchungen eingesetzt. Begleitend zu den experimentellen Untersuchungen wurden verschiedene numerische Modelle entwickelt und anhand der Messergebnisse validiert. Aus diesem Vergleich wurden Empfehlungen zur numerischen Strömungssimulation von Axial-Radial-Diffusoren abgeleitet. Insgesamt zeigte die numerische Simulation unter den gewählten Bedingungen eine hohe Sensitivität gegenüber den Modellparametern mit entsprechenden Auswirkungen auf die beabsichtigte Geometrieoptimierung. In Arbeitspaket 4.2 des AG Turbo Verbundprojekts RoboFlex ist es den Projektpartnern Hochschule Düsseldorf und Everllence gelungen, eine modellprädiktive Mehrgrößen-Verbundregelung eines exemplarischen Turbomaschinen-Strangs zu entwickeln. Dies erlaubt der Regelungseinheit, alle verfügbaren Stellgrößen simultan zu benutzen, um ein vorgegebenes Regelungsziel zu erreichen. Zudem kann das Regelungsziel flexibel um weitere Vorgaben und Beschränkungen erweitert werden, indem diese in die Kostenfunktion implementiert werden. Ein zentraler Forschungsschwerpunkt war hierbei die Einbindung von Methoden der künstlichen Intelligenz in die Modellierung und im gleichen Zuge deren Überführung und Implementierung in die linearisierte Modellform, die die modellprädiktive Regelung verlangt. Ein besonderes Augenmerk wurde auf die fortlaufende Nachführung des KI-Modells an den zuletzt durch Messungen bekannten Anlagenzustand gelegt. KW - Strömungsmaschine KW - Regelungstechnik KW - Maschinelles Lernen KW - Deep Learning KW - Tiefes neuronales Netz Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-57122 PB - Repositorium für Naturwissenschaften und Technik CY - Hannover ER - TY - JOUR A1 - Ocakci, Elif A1 - Niemann, Jörg A1 - Draghici, George T1 - A Method to Evaluate the Life Cycle Sustainability Value of Alternative Solution Designs JF - Acta Technica Napocensis; Series: Applied Mathematics, Mechanics and Engineering N2 - The paper focuses on developing an integrative methodology to evaluate environmental, economic, and social sustainability of alternative solution design options. Core approach is to extend the classic method of Quality Function Deployment (QFD) towards a holistic integrated model to overall evaluate the different aspects of all three pillars of sustainability (economy, ecology and social) across the product life cycle. The methods identify key aspects and allow users to consider and weigh different life cycle aspects in a overall scoring scheme. KW - Nachhaltigkeit KW - Produktlebenszyklus KW - Evaluation KW - Quality Function Deployment Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-58290 UR - https://atna-mam.utcluj.ro/index.php/Acta/article/view/2809 SN - 2393–2988 VL - 68 IS - 1S SP - 277 EP - 284 PB - Technical University of Cluj-Napoca ER - TY - CHAP A1 - Grote-Ramm, Wolfgang A1 - Schönig, Felix A1 - Schwarzbözl, Peter A1 - Drexelius, Maximilian A1 - Maldonado Quinto, Daniel A1 - Binder, Matthias T1 - Model Predictive Control and Service Life Monitoring for Molten Salt Solar Power Towers T2 - 29th SolarPACES Conference, Sydney N2 - A two-component system for control and monitoring of solar power towers with molten salt receivers is proposed. The control component consists of a model predictive control applica-tion (MPC) with a flexible objective function and on-line tunable weights, which runs on a In-dustrial PC and uses a reduced order dynamic model of the receiver’s thermal and flow dy-namics. The second component consists of a service-life monitoring unit, which estimates the service-life consumption of the absorber tubes depending on the current mode of operation based on thermal stresses and creep fatigue in the high temperature regime. The calculation of stresses is done based on a detailed finite element study, in which a digital twin of the re-ceiver was developed. By parallelising the model solver, the estimation of service-life con-sumption became capable of real-time operation. The system has been implemented at a test facility in Jülich, Germany, and awaits field experiments. In this paper, the modeling and archi-tecture are presented along simulation results, which were validated on a hardware-in-the-loop test bench. The MPC showed good disturbance rejection while respecting process variable constraints during the simulation studies. KW - Solar Power Tower KW - Molten Salt KW - Model Predictive Control KW - Dynamic Modelling KW - Service-life Monitoring Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-43233 PB - SolarPACES ER - TY - CHAP A1 - Kretschmar, Dominik A1 - Niemann, Jörg T1 - Meta-Analysis of Sustainability Management in Complex Development Environments: By Integrating Requirements into Systems Engineering Approaches T2 - Proceedings of the Review of Management and Economic Engineering 9th International Management Conference "Rethinking Management in Adaptive Environments", Cluj-Napoca, Romania, 1echnical University of Cluj-Napoca, Romania,19 -21 September, 2024, Technical University of Cluj-Napoca, Romania N2 - Purpose – The complexity of developing product service systems continues to increase. At the same time, development cycles are becoming ever shorter and the requirements for safety, conformity and sustainability ever higher. In this article, a meta-analysis is carried out on the possibility of integrating sustainability aspects as requirements in a systems engineering approach and the differences are discussed. Methodology/approach - A systematic literature search of articles in ScienceDirect between 2016 and 2023 is carried out. The keywords are sustainability and system engineering incl. synonyms. In a further step, the papers are screened for their relevance to product service systems and the relevance for the purpose. Findings – To address sustainability in complex technical systems, a holistic, model-based approach is required to ensure that sustainability aspects are considered. By using frameworks and methods such as macPro² and SysLM, requirements and indicators for sustainability can be integrated into the development phase, whereas currently only the environmental dimension is usually considered via resource and energy indicators. Research limitations/implications – In order to achieve a complete picture, additional databases must be considered and research results from ongoing projects must be awaited. KW - Systemtechnik KW - Hybrides Leistungsbündel KW - Nachhaltigkeit Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-55374 UR - https://conference.rmee.org/wp-content/uploads/2024/10/Proceedings_RMEE2024_online_ISSN-3061-3892.pdf SN - 3061-3892 PB - UTPRESS ER - TY - CHAP ED - Jahr, Andreas ED - Batos, Andrej T1 - SIMULAND 2020: Simulation landtechnischer Prozesse, Düsseldorf, 19. März 2020 N2 - Die Simulation landwirtschaftlicher Prozesse hat in den vergangenen Jahren stark an Bedeutung gewonnen. Damit ist die Hoffnung verbunden, neue Erkenntnisse zu generieren mit dem Ziel der Erhöhung der Effizienz, Qualität und Wirtschaftlichkeit in der Landwirtschaft. Besonders große Herausforderungen stellen dabei die Modellierung landwirtschaftlicher Güter und der für Simulationen teilweise erforderliche, hohe Rechenaufwand dar. Um der bereits recht weiten und weiter fortschreitenden Verbreitung dieser Technologien Rechnung zu tragen und sie zu fördern, entstand die Idee für eine themenspezifische Tagung, die sich ausdrücklich und ausschließlich mit der Simulation landtechnischer Güter und Prozesse befasst. N2 - The simulation of agricultural processes has become important in recent years. Nowadays, the focus is mainly on the virtual representation of agricultural goods and the processes associated with their processing and handling. The goal of these efforts is to generate new knowledge helping to increase efficiency, quality and profitability in agriculture. Modelling of agricultural goods poses a large challenge due to their highly complex structure and a high scattering of the measured values as well as their inhomogeneous and time-varying properties. In addition, some simulation cases result in a high computing effort. In order to support and promote the already quite broad and progressive dissemination of these technologies, the idea for a topic-specific conference was born, which deals explicitly and exclusively with the simulation of agricultural goods and processes. T2 - SimuLand 2020 - Conference Proceedings KW - Simulation KW - VDI KW - Modellierung KW - Simulation KW - Parametrierung KW - Parameterermittlung KW - parameterization KW - parameter determination KW - agricultural goods Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-23368 SN - 978-3-941334-30-4 CY - Düsseldorf ER - TY - GEN A1 - Seidel, Carl Anton T1 - Jumping Humanoid Simulink Simulation With Three Hill-Type Muscle Models N2 - This paper investigates the implementation of a human body model for the simulation of a jumping motion in Simulink. It contains details to get an insight into modern biomechanics without previous experience. In the simulation, a Hill-Type muscle is used to generate joint momentum with a phenomenologically realistic relationship between muscle length and force. The simulation published with this article is one of many solutions to design a humanoid simulation. The paper guides through the implemented build and explains its range of application. KW - biomechanics KW - humanoid Simulation KW - locomotion study KW - Simulation of Mechanical Systems Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-33765 CY - Düsseldorf ER - TY - CHAP A1 - Batos, Andrej A1 - Hellenbroich, Jean Maurice A1 - Kiel, Jürgen A1 - Jahr, Andreas ED - Bertram, Torsten ED - Corves, Burkhard ED - Janschek, Klaus ED - Rinderknecht, Stephan T1 - Entwicklung einer smarten, elektronisch gesteuerten Dosiereinheit für den gezielten und sparsamen Einsatz von Pflanzenschutzmitteln T2 - Fachtagung VDI MECHATRONIK 2022 N2 - Feldspritzen verfügen über entlang eines Spritzgestänges angebrachte Düsen, die ein Pflanzenschutzmittel-(PSM-)Trägerflüssigkeits-Gemisch verteilen. Da die Düsen nur ein PSM-Gemisch applizieren und häufig nicht einzeln ansteuerbar sind, wird nicht bedarfsgerecht verteilt und u. U. stellenweise zu wenig, zu viel oder nicht das optimale PSM appliziert. Dieser Beitrag stellt das Labormodell einer High-Speed-Dosiereinheit zur Vermischung dreier PSM mit der Trägerflüssigkeit vor, mit der Pflanzen individuell und mit der minimal nötigen PSM-Menge behandelt werden. Sie arbeitet unabhängig vom hydraulischen System der Trägerflüssigkeit, ist reaktionsschnell und überaus dosiergenau. Basierend auf einer Applikationskarte, die den Pflanzenstatus enthält, und der GPS-Position werden Ausbringvolumen, -zeitpunkt, -position und PSM-Art in einem ISOBUS-Terminal bestimmt und an ein Steuergerät weitergegeben, das die Dosiereinheit ansteuert. Neben der neuentwickelten Hardware und Steuerung werden erste Prüfstandergebnisse vorgestellt. N2 - Field sprayers have nozzles mounted along a spray boom that distribute a mixture of a crop protection agent (CPA) and a carrier liquid, usually water. Since the nozzles apply only a single CPA mixture and often cannot be controlled individually, application is not demand-oriented, which can result in locally insufficient, excessive, or non-optimal CPA application. This paper presents a laboratory model of a newly developed high-speed dosing unit for mixing three CPAs with a carrier liquid, enabling individual plant treatment using only the minimally required amount of CPA. The system operates independently of the carrier liquid’s hydraulic system, responds rapidly, and provides extremely accurate dosing. Based on an application map containing crop status and GPS position, the required application volume, timing, position, and CPA type are determined in an ISOBUS terminal and transmitted to a control unit that actuates the dosing unit. In addition to the newly developed hardware and control system, initial test bench results are presented. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:tuda-tuprints-209637 PB - Universitäts- und Landesbibliothek Darmstadt CY - Darmstadt ER - TY - JOUR A1 - Niemann, Jörg A1 - Basson, A. A1 - Fussenecker, Claudia A1 - Kruger, K. A1 - Schlösser, M. A1 - Turek, S. A1 - Amarnath, H. Umadevi T1 - Implementation of Eye-Tracking Technology in Holonic Manufacturing Systems JF - Procedia - Social and Behavioral Sciences Y1 - 2018 U6 - https://doi.org/10.1016/j.sbspro.2018.03.005 VL - 238 SP - 37 EP - 45 PB - Elsevier ET - SIM 2017: 14th International Symposium in Management, Challenges and Innovation in Management and Entrepreneurship} ER - TY - JOUR A1 - Kacso-Vidrean, Lorand A1 - Niemann, Jörg A1 - Baidoc, Raluca A1 - Pisla, Adrian T1 - Change Management Aspects in Solar Energy Implementation JF - Procedia - Social and Behavioral Sciences KW - FliX Y1 - 2018 U6 - https://doi.org/10.1016/j.sbspro.2018.04.021 VL - 238 SP - 432 EP - 441 PB - Elsevier ET - SIM 2017 / 14th International Symposium in Management ER - TY - CHAP A1 - Trofimov, Igor A1 - Jahr, Andreas T1 - Zeitsignale im Massenstrom eines Linearschwingförderers zur Nutzung für Regelungsaufgaben T2 - IFToMM D-A-CH Konferenz / Vierte IFToMM D-A-CH Konferenz 2018 Y1 - 2018 U6 - https://doi.org/10.17185/duepublico/45302 SP - 1 EP - 9 PB - DuEPublico CY - Duisburg-Essen ER - TY - JOUR A1 - Dehmer, Joanna A1 - Kutzera, Ana-Alicia A1 - Niemann, Jörg T1 - Digitalisierung von Geschäftsmodellen durch plattformbasiertes Value Chain Management JF - zwf – Zeitschrift für wirtschaftlichen Fabrikbetrieb Y1 - 2017 U6 - https://doi.org/10.3139/104.111697 SN - 0947-0085 VL - 112 IS - 4 SP - 253 EP - 256 PB - Hanser ER - TY - PAT A1 - Jahr, Andreas A1 - Trofimov, Igor T1 - Fördersystem für Schüttgüter N2 - Die Erfindung betrifft ein Verfahren und eine Vorrichtung zur Ermittlung der Masse und Fördergeschwindigkeit von Schüttgütern in einem Linearförderer, wobei aus einem Schüttgutbehälter das Schüttgut über eine Mündung auf eine Förderrinne gelangt. Y1 - 2019 ER - TY - JOUR A1 - Deckert, Carsten A1 - Sürgit, Hasan T1 - Soziale Innovation in Non-Profit- Organisationen JF - Ideen- und Innovationsmanagement Y1 - 2022 U6 - https://doi.org/10.37307/j.2198-3151.2022.03.05 SN - 2198-3151 IS - 3 PB - Erich Schmidt Verlag ER - TY - CHAP A1 - Dehmer, Joanna A1 - Niemann, Jörg T1 - Platform-based value chain management T2 - The 6th International Conference on Manufacturing Engineering and Process (ICMEP 2017), May 27th-29th 2017, Lisboa, Portugal N2 - The transformation of traditional value chain processes towards a digital value chain management enables companies to sustainably establish and retain a competitive market position. Digitisation offers the opportunity to design and operate expansive process chains with efficient process operations via co-operative platforms. Increased customer loyalty („lock-in“) via integrated measures at the front-end raises utilization and planning certainty for the technological recovery system Y1 - 2017 UR - https://www.researchgate.net/publication/318858832_Plattform-based_value_chain_management ER - TY - CHAP A1 - Niemann, Jörg A1 - Dehmer, J. A1 - Batos, Andrej A1 - Kiel, Jürgen A1 - Seifert, S. T1 - The impact of electrification to the total cost of ownership of mobile production machines on the example of a forage harvester T2 - 25th Southern African Universities Power Engineering Conference (SAUPEC 2017), 30.01.-01.02.2017 KW - Life cycle costing KW - Total cost of ownership KW - Sensitivity Analysis KW - Energy Efficiency KW - Energy Management KW - Electrification Y1 - 2017 UR - https://www.researchgate.net/publication/318858764_The_impact_of_electrification_to_the_total_cost_of_ownership_of_mobile_production_machines_on_the_example_of_a_forage_harvester ER - TY - BOOK A1 - Marzi, Thomas A1 - Deerberg, Görge A1 - Dötsch, Christian A1 - Grevé, Anna A1 - Hiebel, Markus A1 - Kaluza, Stefan A1 - Knappertsbusch, Volker A1 - Maga, Daniel A1 - Müller, Torsten A1 - Pflaum, Hartmut A1 - Pohlig, Astrid A1 - Renner, Manfred A1 - Seifert, Ulrich A1 - Stießel, Sebastian A1 - Unger, Christoph A1 - Wack, Thorsten A1 - Weidner, Eckhard T1 - Kohlendioxid, Biomasse und Regenerativer Strom - Ressourcen einer neuen Kohlenstoffwirtschaft? Y1 - 2017 SN - 978-3-87468-358-6 U6 - https://doi.org/10.24406/UMSICHT-N-473349 VL - Umsicht-Diskurs IS - 1 PB - Fraunhofer-Institut für Umwelt-, Sicherheit- und Energietechnik CY - Oberhausen ER - TY - CHAP A1 - Barbashov, Maksim A1 - Batos, Andrej A1 - Jahr, Andreas ED - Holzhauer, Ralf T1 - Experimentelle und theoretische Grundlagenuntersuchung landtechnischer Schnittprozesse bei verschiedenen Schnittgeschwindigkeiten T2 - Ressourcen-Wissen : Hebung ungenutzter Potenziale : Tagungsband Vortragsveranstaltung der Fachgruppe Ressourcen des Graduierteninstitutes NRW, 16. März 2017, Hochschule Bochum Y1 - 2017 SN - 978-3-9819028-0-8 SP - 142 EP - 146 PB - Graduierteninstitut NRW CY - Bochum ER - TY - THES A1 - Batos, Andrej T1 - Domänenübergreifende Mehrkörpersimulation bei Teilungsprozessen pflanzlicher Erntegüter: = Cross-domain multi-body simulation of plant separation processes Y1 - 2016 SN - 978-3-95886-128-2 N1 - RWTH Aachen University, Dissertation, 2016 PB - Verlagshaus Mainz CY - Aachen ER - TY - CHAP A1 - Fomin, A.S. A1 - Kiselev, S.V. A1 - Jahr, Andreas A1 - Sim, H. T1 - Development of the Kinematic Model of Horizontal-Set Drive for Blades of Combine Harvester Thresher T2 - Materialien zum wissenschaftlichen Seminar der Stipendiaten der Programme «Michail Lomonosov» und «Immanuel Kant» 2015/2016 Y1 - 2017 IS - 12 SP - 188 EP - 196 ER - TY - THES A1 - Trofimov, Igor T1 - Modellgestützte Entwicklung eines Verfahrens zur Volumenstromermittlung an Vibrationsfördersystemen N2 - Das in dieser Arbeit behandelte Thema zur angewandten Forschung wird aus zwei großen Quellen gespeist. Zum einen ist das eine experimentelle Untersuchung des Verhaltens eines realen schwingungsfähigen mechanischen Systems. Das Ziel ist das Erstellen eines plausiblen numerischen Prozess- bzw. System-Modells durch Ermittlung der relevanten Systemeinfluss- und Ausgangsgrößen. Zum anderen sind das die Untersuchungen und die Optimierungsmaßnahmen an diesem Modell, um gewünschte Systemeigenschaften bzw. Funktionalitäten mithilfe eines Optimierungsverfahrens mit anschließender experimenteller Verifikation der Optimierungsergebnisse zu erreichen. Die angestrebten Systemfunktionalitäten lassen sich dabei wie folgt formulieren: Die Messeinrichtung des Reglers eines Linearschwingförderers für Schüttgut soll, mit Hilfe des wiegenden Sensors (Kraftsensor) alleine, bei einem kontinuierlichen Materialfluss den Massenstrom, also sowohl die Masse als auch die Geschwindigkeit des auf dem Förderorgan der Förderanlage bewegenden Gutes, ermitteln. Hierbei wird von einer sensorlosen Erfassung der Geschwindigkeit des Fördergutes gesprochen. Die Idee zur sensorlosen Erfassung der Geschwindigkeit eines konstanten Materialflusses am Linearschwingförderer beruht auf der Auswertung des Zeitsignals des im Systemregler integrierten wiegenden Sensors. Das Zeitsignal im sonst konstanten Signal kommt an dem Sensor aufgrund einer Massendiskontinuität (Massenfehler) zustande, die zu diesem Zweck im homogenen Materialfluss auf dem Förderorgan (Förderrinne) des Förderers absichtlich verursacht wird. Die Erzeugung des Massenfehlers wurden über die Variation des Schwingungsverhaltens der Förderanlage realisiert. Dafür wurden folgende Phänomena in einem mit Vibration belasteten Schüttgut ausgenutzt: Infolge der Veränderung der zugeführten Schwingungsenergie können sich sowohl das Profil des Materialstroms als auch die Dichte (Aggregatzustand1) des zu fördernden Materials verändern. Die Systemantwort auf Variation der Schwingungsenergie in Form des Zeitsignals des wiegenden Sensors wurde mit einem speziellen Auswertungsalgorithmus zur Fördergeschwindigkeit ausgewertet. Die Auswertungsergebnisse fließen neben den Werten der Eingangsparameter des Prozesses in das mathematische Modell ein. Im Folgenden wurde das Modell als ein mehrdimensionales Optimierungsproblem betrachtet und unter Anwendung einer geeigneten Optimierungsmethode zielführend behandelt. Anschließend wurde das ermittelte Optimum messtechnisch validiert. KW - Fördergeschwindigkeit KW - Optimierungsmethode KW - Massenstrom KW - Schüttgut KW - mathematisches Prozessmodell Y1 - 2022 UR - https://publications.rwth-aachen.de/record/849332/files/849332.pdf U6 - https://doi.org/10.18154/RWTH-2022-06734 PB - Rheinisch-Westfälische Technische Hochschule Aachen CY - Aachen ER - TY - CHAP A1 - Batos, Andrej A1 - Beckers, S. A1 - Grüner, S. A1 - Kiel, J. A1 - Jahr, A. A1 - Schniederbruns, B. A1 - Berghaus, A. A1 - Weiß, P. ED - Wissensforum GmbH, VDI T1 - Möglichkeiten und Grenzen eines in einem Feldhäcksler verbauten, elektrisch angetriebenen Wurfbeschleunigers T2 - LAND.TECHNIK 2016: Das Forum für agrartechnische Innovationen Y1 - 2016 SN - 978-3-18-102273-3 U6 - https://doi.org/10.51202/9783181022733-325 VL - VDI-Berichte, 2273 SP - 325 EP - 332 PB - VDI Verlag CY - Düsseldorf ER - TY - BOOK A1 - Jahr, Andreas A1 - Berger, Joachim T1 - Klausurentrainer Technische Mechanik: Aufgaben und ausführliche Lösungen zu Statik, Festigkeitslehre und Dynamik Y1 - 2017 SN - 978-3-658-14782-2 U6 - https://doi.org/10.1007/978-3-658-14783-9 PB - Springer Nature CY - Wiesbaden ET - 4. Auflage ER - TY - CHAP A1 - Batos, Andrej A1 - Jahr, Andreas A1 - Corves, B. T1 - Experimental Investigations for the Characterization of Cutting Processes on Biomaterials [Oralposter] T2 - European Symposium and Exhibition on Biomaterials and Related Areas – Euro BioMAT 2015 Y1 - 2015 ER - TY - GEN A1 - de Carvalho, Raphael A1 - Heinze, Robert A1 - Ille, Fabian A1 - Adam, Mario A1 - Kameier, Frank A1 - Schauenberg, Udo T1 - Verbesserte energetische Prognose von air conomy Modulen. Vergleich zwischen Design of Experiments (DoE) und Dimensionsanalyse (Teil 1) T2 - HLH Lüftung/Klima, Heizung/Sanitär, Gebäudetechnik Y1 - 2012 VL - 63 IS - 8 SP - 24 EP - 28 PB - Springer VDI-Verlag ER - TY - JOUR A1 - Barbashov, Maksim A1 - Gellings, Markus A1 - Özen, Semih A1 - Jahr, Andreas T1 - High-speed wear tests on mower blade from various manufactures using the wear pot methode JF - Agricultural engineering.eu N2 - Rotary mowers are ofen used for forage harvesting in agriculture, as this technology can achieve a high throughput. These knives are therefore exposed to high levels of wear and tear, and will also be ofen changed because of loss of material by bad cutting quality. Thatn is why it is interesting to save costs during manufacturing in spite of a correspondingly long service life. This research records the current manufacturing quality of the mower blades and examines how they behave in comparison. Based on the obtained results, further decisions on the methods, procedures and ways of extending the life of the disc mower blades should be proposed. For the investigations, a test bench based on a wear pot was used. The wear that occurs on the blade is determined using several parameters and compared accordingly. The parameters of the test setup determined as a result of the test can be used for further studies of wear resistance. N2 - Bei der Grünfutterernte in der Landwirtschaft werden häufig Scheibenmähwerke eingesetzt, um einen hohen Durchsatz zu erzielen. Die dabei eingesetzten Messer sind einem hohen Verschleiß ausgesetzt und werden häufig wegen Verschleiß gewechselt, was sich in einer schlechten Schnittqualität widerspiegelt. Daher ist es interessant, bereits im Produktionsprozess Kosten einzusparen, ohne dabei die Lebensdauer der Messer zu beeinträchtigen. Diese Studie erfasst die aktuelle Fertigungsqualität von Mähmessern und untersucht, wie sie sich im Vergleich verhalten. Anhand der Ergebnisse sollen weitere Entscheidungen über Methoden, Verfahren und Wege zur Verlängerung der Lebensdauer von Rotorklingen vorgeschlagen werden. Für die Untersuchungen wurde ein Prüfstand auf der Basis des Verschleißtopfverfahrens verwendet. Der am Messer auftretende Verschleiß wird anhand mehrerer Parameter ermittelt und entsprechend verglichen. Die aus den Untersuchungen gewonnenen Parameter können für weiterführende Verschleißuntersuchungen genutzt werden. KW - Disc mower blades KW - rotary mower KW - slurry pot KW - ellipse-fit method Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-44709 SN - 2943-5641 VL - 79 IS - 2 SP - 95 EP - 115 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e. V. (KTBL) ER - TY - JOUR A1 - Carsten, Stöhr A1 - Monika, Janssen A1 - Jörg, Niemann A1 - Benedikt, Reich T1 - Smart Services JF - Procedia - Social and Behavioral Sciences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59819 SN - 1877-0428 VL - 238 SP - 192 EP - 198 PB - Elsevier ET - SIM 2017 / 14th International Symposium in Managemen ER - TY - JOUR A1 - Grote-Ramm, Wolfgang A1 - Lanuschny, David A1 - Lorenzen, Finn A1 - Oliveira Brito, Marcel A1 - Schönig, Felix T1 - Continual learning for neural regression networks to cope with concept drift in industrial processes using convex optimisation JF - Engineering Applications of Artificial Intelligence N2 - Process models in industrial applications, e.g. predictive maintenance or automation, are subject to both divergence from the underlying system due to their time-variant nature and to high complexity resulting from a wide operational range being covered. Hence, regression models require high accuracy for the present system state and at the same time need to be valid across the whole system operating space. While accuracy for the current system state can be gained by updating the model on the current data, the overall validity must often be retrieved from historical or design data. We propose a method to find an appropriate compromise for these two demands. A pre-trained artificial neural network (ANN) is continually updated on the current sensor data stream using convex optimisation. Thus, a unique and optimal solution is generated in each update step, while robust regression accuracy on the domain that is not covered by the arriving data subset is maintained. This is achieved by introducing a data management system to provide some historical data, constraining the optimisation problem and manipulating the architecture of the ANN. Models updated with this method show reasonable stability but display plastic behaviour at the current operating point. KW - Continual learning KW - Concept drift KW - Catastrophic forgetting KW - Convex optimization Y1 - 2023 U6 - https://doi.org/10.1016/j.engappai.2023.105927 SN - 1873-6769 VL - 120 PB - Elsevier CY - New York ER - TY - JOUR A1 - Batos, Andrej A1 - Ruepp, Maximilian A1 - Jahr, Andreas A1 - Corves, Burkhard T1 - Ermittlung der Biege- und Schnitteigenschaften von Halmgut mit einem Universalprüfstand JF - LANDTECHNIK KW - auto KW - Universalprüfstand KW - Messung KW - Biegeeigenschaften KW - Schnitteigenschaften KW - Halm Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59856 SP - 84 EP - 96 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e.V. ER - TY - CHAP A1 - Jahr, Andreas A1 - Bongartz, Robert A1 - Sim, Hunn A1 - Pillmann, Alex T1 - A Novel Test Method to Determine the Wear Resistance of Agricultural Cutting Tools with an Analyzing Method Based on an Ellipse-Fit Algorithm T2 - Conference Papers in Science N2 - Cutting belongs to the essential techniques in many fields of application in agricultural engineering. Cutting tools in agricultureare exposed to a high amount of abrasive wear and impact stress. Increasing the wear resistance of cuttings tools has a highsignificance for the efficiency and profitability of agricultural machinery. Blunt and deformed blades decrease the energy efficiencyand the cutting quality. Blade failures cause machine breakdowns and increase labor and material costs. To enable a consistent andsystematic optimization of the blades, a suitable testing method is necessary. Conventional field tests do not provide comparableand repeatable results. Therefore, a test method developed at the FMDauto in cooperation with the Ennepetaler Schneid- undM¨ahtechnik (ESM) GmbH & Co. KG is presented. The test bench provides standardized and repeatable conditions with a similarwear pattern which is found during field operations. One of the remaining challenges is a clear wear characterization. Existinganalyzing methods do not consider the energy efficiency and do not determine the edge holding property clearly. In this paper, anew analyzing method based on an ellipse-fit method is introduced to rate the geometrical shape of the cutting edge and examinethe wear resistance of different blade Y1 - 2015 U6 - https://doi.org/10.1155/2015/548238 SN - 2356-6108 N1 - This Conference Paper is based on a presentation given by Hunn Sim at “European Symposium on Friction, Wear, and WearProtection” held from 6 May 2014 to 8 May 2014 in Karlsruhe, Germany VL - 2015 SP - 1 EP - 6 PB - Wiley ER - TY - CHAP A1 - Batos, Andrej A1 - Röger, T. A1 - Diett, D. A1 - Jahr, Andreas A1 - Corves, Burkhard T1 - Ein Beitrag zur Simulation landtechnischer Aggregate T2 - Land.Technik 2014 : Agrartechnik im Dialog mit Politik und Gesellschaft ; Berlin 19. und 20. November 2014 ; [Fachbeiträge der 72. Internationalen Tagung Land.Technik des Fachbereichs Max-Eyth-Gesellschaft Agrartechnik im VDI]= Conference: Agricultural Engineering 2014 / VDI-MEG Y1 - 2014 SN - 978-3-18-092226-3 VL - VDI-Berichte ; 2226 SP - 53 EP - 58 PB - VDI-Verl. CY - Düsseldorf ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Jahr, Stefan A1 - Corves, Burkhard T1 - Entwicklung einer Zykloidenverzahnung für hohe Übersetzungen für die Elektromobilität - Zweistufiges Planetengetriebe mit epizykloidaler Zahnform T2 - Bewegungstechnik 2012 : Koppelgetriebe, Kurvengetriebe und gesteuerte Antriebe im Maschinen-, Fahrzeug-, und Gerätebau ; Nürtingen, 11. und 12. September 2012 / VDI Produkt- und Prozessgestaltung Y1 - 2012 SN - 978-3-18-092175-4 VL - VDI-Berichte ; 2175 SP - 69 EP - 80 PB - VDI Verl. CY - Düsseldorf ER - TY - CHAP A1 - Gaida, Philipp A1 - Jahr, Andreas A1 - Weinberg, Kerstin ED - Dłużewsk, Paweł ED - Jurczak, Grzegorz ED - Young, Toby D. T1 - FEA and experimental validation of an electroactive polymer actuator [Abstract] T2 - Third International Conference on Material Modelling incorporating the Thirteenth European Mechanics of Materials Conference, September 8–11, 2013,Warsaw, Poland Y1 - 2013 SN - 978-83-89687-83-8 IS - 185 PB - Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk CY - Warszawa ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Sim, Hunn A1 - Villena Martínez, Jose David A1 - Zepke, S. T1 - Eine neuartige Methode zur Bestimmung der Verschleissfestigkeit von Hackslermessern T2 - Mit Erfahrung und Innovationskraft zu mehr Effizienz: Land.Technik 2012, Conference: Agricultural Engineering, Karlsruhe 6. und 7. November 2012 Y1 - 2012 SN - 9783180921730 SN - 0083-5560 VL - 2173 SP - 263 EP - 270 PB - VDI-Verlag CY - Düsseldorf ER - TY - JOUR A1 - Gaida, Philipp A1 - Weinberg, Kerstin A1 - Jahr, Andreas T1 - Viscoelastic modelling and experimental results of a dielectric electro-active polymer diaphragm actuator JF - Proceedings in Applied Mathematics and Mechanics (PAMM) Y1 - 2014 U6 - https://doi.org/10.1002/pamm.201410225 SN - 1617-7061 VL - 14 IS - 1 SP - 475 EP - 476 PB - Wiley ET - 85th Annual Meeting of the GAMM. March 10th – 14th, 2014, Erlangen ER - TY - JOUR A1 - Shajahan, Mohamed Iqbal A1 - Benim, Ali Cemal T1 - Granular PCM based heat sink for electronics thermal management JF - Applied Thermal Engineering N2 - This study investigates aluminum heat sinks integrated with GR42 phase change material (PCM), aiming to enhance thermal inertia and stabilize device temperatures. This is important, since the increasing miniaturization and performance demands for electronic devices have led in a growing need for advanced thermal management systems capable of handling rapid transient loads. The novelty of the work lies in examining different heat sink layouts that optimize the heat dissipation capabilities of GR42 PCMs while minimizing size and weight for electronic cooling. The experimental testing was conducted using three configurations, namely no fin, circular fin and hexagonal fin, with three input powers (4 W, 8 W, and 12 W). The experimental results show that the hexagonal-fin heat sink, surface area is 25 % more than circular fins, exhibited superior thermal performance without significant variation in input power. Notably, the hexagonal-fin heat sink achieved the desired set point temperature of 55 ◦C in 33 % less time than the circular-fin design and 45 % less time than the heat sink without fins. Furthermore, the peak temperatures increased up to 21 % for circular fins. During the charging cycles, the enhancement ratios vary from 72 % and begin to narrow to 25 % during discharge cycles. The hexagonal-fin configuration also exhibited superior melting dynamics, completing the phase transition 44 % faster at higher input power than the circular fins, and established a thermal deviation of nearly 51 % less than finless heat sinks. These findings underscore the critical role of fin geometry and PCM integration in achieving uniform temperature distribution and improved energy storage efficiency. Overall, the hexagonal-fin heat sink with GR42 PCM shows strong potential as a passive cooling solution for low-power portable electronic devices. KW - Heat sinks KW - Portable electronic cooling KW - Latent heat storage KW - GR42 PCM KW - Hexagonal fin KW - Circular fin KW - HSD Publikationsfonds KW - DFG Publikationskosten Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59649 SN - 1359-4311 VL - 286 PB - Elsevier ER - TY - JOUR A1 - Jahr, Andreas A1 - Corves, Burkhard A1 - Batos, Andrej A1 - Schumacher, Mathias T1 - Simulation landtechnischer Schnitt- und Strömungsprozesse JF - agricultural engineering.eu N2 - Der Einsatz moderner Simulationsverfahren beschränkt sich im Bereich der Landmaschinenentwicklung in der Regel auf Anwendungen, die aus der Automobiltechnik bekannt sind. Darüber hinaus könnten diese Verfahren auch im Rahmen der Auslegung von Erntemaschinen hinsichtlich des Ernteprozesses einen maßgeblichen Beitrag zur weiteren Ressourcenschonung und Energieverbrauchsminderung leisten. Im Folgenden wird ein Ansatz zur Simulation erntetechnischer Schnittprozesse mit Hilfe der Mehrkörpersimulation (MKS) vorgestellt. Ferner soll die Anwendung der Strömungssimulation (CFD) am Beispiel eines Schlegelhäckslers gezeigt werden. KW - Strömungssimulation (CFD) KW - Mehrkörpersimulation (MKS) KW - Mähdrescherhäcksler KW - Schnittprozess Y1 - 2010 U6 - https://doi.org/10.15150/lt.2010.518 SN - 2943-5641 N1 - Diese Veröffentlichung beruht auf den Ergebnissen eines ProInno II-Projektes [1], das vom BMWi gefördert wurde und in Zusammenarbeit mit der Ennepetaler Schneid- und Mähtechnik GmbH & Co. KG (www.esm-ept.de) entstand VL - 65 IS - 5 SP - 372 EP - 375 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e. V. (KTBL) ER - TY - CHAP A1 - Jahr, Andreas A1 - Corves, B. A1 - Batos, Andrej A1 - Wenzel, O. T1 - Abbildung und Analyse von Schnittprozessen mit Hilfe der Mehrkörper- und Strömungssimulation – Modellierung eines Mehrkörper-Teilungsprozesses und Ermittlung der erforderlichen Antriebsleistung eines Häckslers T2 - Landtechnik regional und international: Land-Technik 2008, Tagung Stuttgart-Hohenheim, 25. und 26. September 2008 KW - Landtechnik Y1 - 2008 SN - 9783180920450 VL - VDI-Berichte ; 2045 SP - 247 EP - 255 PB - VDI-Verl. CY - Düsseldorf ER - TY - BOOK A1 - Bongartz, R. A1 - Trofimov, Igor A1 - Jahr, Andreas ED - Pohl, Michael T1 - Optimierung der Zeitfestigkeit geschweißter rotationssymmetrischer Bauteile durch Randschichtverfestigung der Schweißzone T3 - Konstruktion, Werkstoffentwicklung und Schadensanalyse : [Tagung Werkstoffprüfung 2010, 02. und 03. Dezember 2010 in Neu-Ulm] KW - Werkstoffprüfung Y1 - 2010 SN - 9783514007789 SP - 131 EP - 136 PB - Verlag Stahleisen CY - Düsseldorf ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej ED - Corves, Burkhard T1 - Mehrkörpermechanik-Anwendungen in der Landtechnik T2 - 8. Kolloquium Getriebetechnik Aachen 2009 Y1 - 2009 SN - 978-3-86130-984-0 SP - 287 EP - 296 PB - Mainz CY - Aachen ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Sim, Hunn A1 - Villena Martínez, Jose David T1 - A New Approach for Measuring the Wear Resistance of Cutter Blades T2 - International Conference of Agricultural Engineering – CIGR-AgEng2012, Valencia/Spanien, 8.-12.07.2012 Y1 - 2012 ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Pillmann, A. A1 - Hoppe, S. A1 - Diett, D. T1 - Determining the Cutting Properties of Agricultural Products T2 - International Conference of Agricultural Engineering – CIGR-AgEng2012, Valencia/Spanien, 8.-12.07.2012 Y1 - 2012 ER - TY - CHAP A1 - Gaida, Philipp A1 - Jahr, Andreas A1 - Weinberg, Kerstin T1 - Preliminary survey of a diaphragm EAP stack for the use as an actuator in a water valve T2 - 14th International Workshop on Research and Education in Mechatronics 6th-7th June 2013 Y1 - 2013 ER - TY - JOUR A1 - Scherpen, F. A1 - Draghici, Anca A1 - Niemann, Jörg T1 - Customer Experience Management to Leverage Customer Loyalty in the Automotive Industry JF - Procedia - Social and Behavioral Sciences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-25198 SN - 1877-0428 N1 - PII: S1877042818300442 VL - 238 SP - 374 EP - 380 PB - Elsevier ET - 14th International Symposium in Management, Challenges and Innovation in Management and Entrepreneurship, 27-28 October 2017 ER - TY - JOUR A1 - Dehmer, Joanna A1 - Niemann, Jörg T1 - Value Chain Management Through Cloud-based Platforms JF - Procedia - Social and Behavioral Sciences N2 - The transformation of traditional value chain processes towards a digital value chain management enables companies to sustainably establish and retain a competitive market position. Digitisation offers the opportunity to design and operate expansive process chains with efficient process operations via co-operative platforms. Increased customer loyalty („lock-in“) via integrated measures at the front-end raises utilization and planning certainty for the technological recovery system. KW - Value Chain Management KW - cloud-based platform KW - digitization Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-25126 UR - 1877-0428 N1 - PII: S1877042818300211 VL - 238 SP - 177 EP - 181 PB - Elsevier ET - SIM 2017: 14th International Symposium in Management, Challenges and Innovation in Management and Entrepreneurship, 27-28 October 2017, Timisoara, Romania ER - TY - RPRT A1 - Bhaiya, Madhur A1 - Jahr, Andreas A1 - Happel, Holger T1 - Harvesting-Combine-Flow Simulation Technique N2 - CFX 11.0 is a Computational Fluid Dynamics (CFD) program for simulating the behavior of systems involving fluid flow, heat transfer, and other related physical processes. It works by solving the equations of fluid flow (in a special form) over a region of interest, with specified (known) conditions on the boundary of that region. This tool is used here to analyse the straw cutter which is used to comminute the straw which is left standing in the field after stripper header has stripped the grains from the crops. Stripper Header is a new technique different to conventional harvester machines and it is still under development and testing. It works on the principle in which grains are first stripped off from the head of the standing crop which helps in much reduced intake freeing up the separation systems to handle a larger volume of grains. But with this, the new problem of the disposal of the long, uncut straw left after stripping of grains arose. So a straw cutter is used after the stripper header stage in this Combine Harvester, where the rotor is equipped with pressed steel blades and rotates towards the crop, i.e., it cuts and lifts the straw over the top. This technique is environment friendly because previously farmers would have to burn the long, uncut straw standing in the fields while in this case mulched straw can be used for min-till systems. This rotor based straw cutting machine is analysed here which helps us in increasing power efficiency and comminution rate and quality of cut straw particles. Here fluid flow simulation has been preferred over particle simulation: - CFX 10.0 tool is not very effective for particle simulation techniques and computation time is increased considerably. - It’s very hard to realize particle simulation in CFX 10.0 because we have to define size and properties of each particle and besides this wall conditions would have to be defined differently for every boundary. - Besides this, it’s hard to realize cutting effect with straw particles in CFX 10.0 which otherwise would be comminuted in real life conditions. - The results obtained from fluid simulation are validated using experimental results and found to be nearly the same which clearly contradicts any need of performing particle simulation. KW - Häckseln KW - Ernte KW - Stroh KW - Partikelstrom KW - CFD KW - chaff KW - harvesting KW - Particle flow KW - simulation KW - FHD Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4239 CY - Düsseldorf ER - TY - RPRT A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Happel, Holger T1 - Modellierung eines Strohhalmes in einem Mehrkörpersimulationsprogramm T1 - Modeling of a Wheat Straw by Means of a Multi Body Simulation Program N2 - Im Rahmen dieser Ausarbeitung wird gezeigt, wie ein Weizenstrohhalm in dem Mehrkörpersimulationsprogramm SIMMECHANICS, das ein Zusatztool des Simulations- und Berechnungsprogramms MATLAB(R) bzw. SIMULINK(R) ist, modelliert werden kann. Die Modellierung erfolgt mit dem Ziel, den im Mähdrescherhäcksler stattfindenden Schnittprozess zu simulieren. Dazu werden zuerst die für einen Schnitt relevanten Eigenschaften des Weizenstrohhalmes ermittelt. Dies sind insbesondere die Halmmasse sowie die Winkelfeder- und Winkeldämpfungskonstante. Anschließend wird die Modellierung des Halmes in dem genannten Mehrkörpersimulationsprogramm gezeigt. Abschließend erfolgt ein Vergleich des erstellten Simulationsmodells mit dem realen Strohhalm. N2 - The present paper investigates into the technique of modeling a wheat straw using the multi body simulation program SIMMECHANICS being an add-on of the simulation and calculation program MATLAB(R) or SIMULINK(R) respectively. Modeling of the straw aims at simulating the cutting process taking place inside a combined harvester. Step one identifies meaningful data concerning the characteristics of the straw with respect to the cutting process, in particular blade mass, angle resilience- and angle damping constant. Step two shows how modelling of the straw is performed using SIMMECHANICS. The final chapter compares the simulation model with the behaviour of a typical straw as found in nature. KW - Simulation KW - Erntetechnik KW - Häcksler KW - Messung KW - Land- und Agrartechnik KW - simulation KW - harvest KW - crop chopper KW - measurement KW - agricultural technology KW - FHD Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-3624 CY - Düsseldorf ER - TY - JOUR A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Happel, Holger A1 - Corves, Burkhard T1 - Mehrkörpersimulation eines Schnittprozesses JF - LANDTECHNIK N2 - Es wird gezeigt, wie ein Schnittprozess aus dem Bereich der Erntetechnik mit dem Mehrkörpersimulationsprogramm SimMechanics simuliert werden kann. Ziel ist es, im Rahmen des Forschungsvorhabens eine Grundlage zu schaffen für die virtuelle Bestimmung der erforderlichen Antriebsleistung und Optimierung von Mähdrescherhäckslern hinsichtlich einer nachhaltigen und Ressourcen schonenden Leistungssteigerung. KW - Erntetechnik KW - Schnittprozess KW - Simulation KW - Harvest technology KW - cutting process Y1 - 2008 U6 - https://doi.org/10.15150/LT.2008.822 VL - 63 IS - 4 SP - 218 EP - 220 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e.V. ER - TY - CHAP A1 - Kiel, Jürgen A1 - Jahr, Andreas A1 - Becker, Sebastian A1 - Ingenlath, Philipp A1 - Quarz, Dieter A1 - Gaida, Philipp A1 - Villena Martínez, Jose David ED - Bertram, Torsten ED - Corves, Burkhard ED - Janschek, Klaus T1 - Entwicklung eines aktiven, individualisierten elektromotorischen Kraft-/ Cardio Trainingsgerätes T2 - Fachtagung Mechatronik 2013 : Aachen, (06.03. - 08.03.2013) KW - Industrieroboter KW - Simulation KW - Regelungstechnik KW - Sensortechnik KW - Handhabungstechnik KW - Elektromechanisches Gerät KW - Kraftfahrzeugtechnik KW - Modellierung KW - Mechatronik KW - Aktorik Y1 - 2013 SN - 3-86130-958-0 SP - 289 EP - 292 PB - Aachen ER - TY - CHAP A1 - Hüsen, Jonsa A1 - von Berg, Markus A1 - Steffens, Jochen T1 - Evaluating the Effectiveness of Virtual Listening Tests for Balanced Armature Headphone Drivers T2 - AES International Conference on Headphone Technology 2025 August 27–29, Espoo, Finland Y1 - 2025 UR - https://aes.org/publications/elibrary-page/?id=22929 IS - 3 PB - Audio Engineering Society ER -