TY - JOUR A1 - Varduhn, Vasco A1 - Hsu, Ming-Chen A1 - Ruess, Martin A1 - Schillinger, Dominik T1 - The tetrahedral finite cell method: Higher-order immersogeometric analysis on adaptive non-boundary-fitted meshes JF - International Journal for Numerical Methods in Engineering Y1 - 2016 U6 - https://doi.org/10.1002/nme.5207 SN - 1097-0207 VL - 107 IS - 12 SP - 1054 EP - 1079 PB - Wiley ER - TY - JOUR A1 - Wille, Hagen A1 - Ruess, Martin A1 - Rank, Ernst A1 - Yosibash, Zohar T1 - Uncertainty quantification for personalized analyses of human proximal femurs JF - Journal of Biomechanics N2 - Computational models for the personalized analysis of human femurs contain uncertainties in bone material properties and loads, which affect the simulation results. To quantify the influence we developed a probabilistic framework based on polynomial chaos (PC) that propagates stochastic input variables through any computational model. We considered a stochastic E-ρ relationship and a stochastic hip contact force, representing realistic variability of experimental data. Their influence on the prediction of principal strains (ϵ1 and ϵ3) was quantified for one human proximal femur, including sensitivity and reliability analysis. Large variabilities in the principal strain predictions were found in the cortical shell of the femoral neck, with coefficients of variation of ≈40%. Between 60 and 80% of the variance in ϵ1 and ϵ3 are attributable to the uncertainty in the E-ρ relationship, while ≈10% are caused by the load magnitude and 5-30% by the load direction. Principal strain directions were unaffected by material and loading uncertainties. The antero-superior and medial inferior sides of the neck exhibited the largest probabilities for tensile and compression failure, however all were very small (pf<0.001). In summary, uncertainty quantification with PC has been demonstrated to efficiently and accurately describe the influence of very different stochastic inputs, which increases the credibility and explanatory power of personalized analyses of human proximal femurs. Y1 - 2016 UR - http://www.ncbi.nlm.nih.gov/pubmed/26873282 U6 - https://doi.org/10.1016/j.jbiomech.2015.11.013 SN - 0021-9290 VL - 49 IS - 4 SP - 520 EP - 527 PB - Elsevier ER - TY - JOUR A1 - Friedrich, Linus A1 - Loosen, Simon A1 - Liang, Ke A1 - Ruess, Martin A1 - Bisagni, Chiara A1 - Schröder, Kai-Uwe T1 - Stacking sequence influence on imperfection sensitivity of cylindrical composite shells under axial compression JF - Composite Structures Y1 - 2015 U6 - https://doi.org/10.1016/j.compstruct.2015.08.132 SN - 0263-8223 VL - 134 SP - 750 EP - 761 PB - Elsevier ER - TY - JOUR A1 - Guo, Yujie A1 - Ruess, Martin T1 - A layerwise isogeometric approach for NURBS-derived laminate composite shells JF - Composite Structures Y1 - 2015 U6 - https://doi.org/10.1016/j.compstruct.2015.01.012 SN - 0263-8223 VL - 124 SP - 300 EP - 309 PB - Elsevier ER - TY - CHAP A1 - Guo, Yujie A1 - Ruess, Martin T1 - Isogeometric Weak Coupling of Shell Structures T2 - 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2015, Kissimmee, Florida, USA, 5 - 9 January 2015 Y1 - 2015 UR - https://arc.aiaa.org/doi/book/10.2514/MSDM15 SN - 978-1-62410-342-1 U6 - https://doi.org/10.2514/6.2015-0965 SP - 1 EP - 14 PB - Curran CY - Red Hook ER - TY - JOUR A1 - Elhaddad, Mohamed A1 - Zander, Nils A1 - Bog, Tino A1 - Kudela, László A1 - Kollmannsberger, Stefan A1 - Kirschke, Jan A1 - Baum, Thomas A1 - Ruess, Martin A1 - Rank, Ernst T1 - Multi-level hp-finite cell method for embedded interface problems with application in biomechanics JF - International Journal for Numerical Methods in Biomedical Engineering N2 - This work presents a numerical discretization technique for solving 3-dimensional material interface problems involving complex geometry without conforming mesh generation. The finite cell method (FCM), which is a high-order fictitious domain approach, is used for the numerical approximation of the solution without a boundary-conforming mesh. Weak discontinuities at material interfaces are resolved by using separate FCM meshes for each material sub-domain and weakly enforcing the interface conditions between the different meshes. Additionally, a recently developed hierarchical hp-refinement scheme is used to locally refine the FCM meshes to resolve singularities and local solution features at the interfaces. Thereby, higher convergence rates are achievable for nonsmooth problems. A series of numerical experiments with 2- and 3-dimensional benchmark problems is presented, showing that the proposed hp-refinement scheme in conjunction with the weak enforcement of the interface conditions leads to a significant improvement of the convergence rates, even in the presence of singularities. Finally, the proposed technique is applied to simulate a vertebra-implant model. The application showcases the method's potential as an accurate simulation tool for biomechanical problems involving complex geometry, and it demonstrates its flexibility in dealing with different types of geometric description. Y1 - 2018 UR - http://www.ncbi.nlm.nih.gov/pubmed/29265715 U6 - https://doi.org/10.1002/cnm.2951 SN - 2040-7947 VL - 34 IS - 4 PB - Wiley ER - TY - JOUR A1 - Keshavanarayana, Pradeep A1 - Ruess, Martin A1 - de Borst, René T1 - On the monolithic and staggered solution of cell contractility and focal adhesion growth JF - International Journal for Numerical Methods in Biomedical Engineering Y1 - 2018 UR - http://www.ncbi.nlm.nih.gov/pubmed/30070031 U6 - https://doi.org/10.1002/cnm.3138 SN - 2040-7947 VL - 34 IS - 11 PB - Wiley ER - TY - JOUR A1 - Magisano, D. A1 - Liang, Ke A1 - Garcea, G. A1 - Leonetti, L. A1 - Ruess, Martin T1 - An efficient mixed variational reduced-order model formulation for nonlinear analyses of elastic shells JF - International Journal for Numerical Methods in Engineering Y1 - 2018 U6 - https://doi.org/10.1002/nme.5629 SN - 1097-0207 VL - 113 IS - 4 SP - 634 EP - 655 PB - Wiley ER - TY - JOUR A1 - Nguyen, Lam H. A1 - Stoter, Stein K.F. A1 - Ruess, Martin A1 - Sanchez Uribe, Manuel A. A1 - Schillinger, Dominik T1 - The diffuse Nitsche method: Dirichlet constraints on phase-field boundaries JF - International Journal for Numerical Methods in Engineering Y1 - 2018 U6 - https://doi.org/10.1002/nme.5628 SN - 1097-0207 VL - 113 IS - 4 SP - 601 EP - 633 PB - Wiley ER - TY - JOUR A1 - Groen, Jeroen P. A1 - Langelaar, Matthijs A1 - Sigmund, Ole A1 - Ruess, Martin T1 - Higher-order multi-resolution topology optimization using the finite cell method JF - International Journal for Numerical Methods in Engineering Y1 - 2017 U6 - https://doi.org/10.1002/nme.5432 SN - 1097-0207 VL - 110 IS - 10 SP - 903 EP - 920 PB - Wiley ER - TY - JOUR A1 - Guo, Yujie A1 - Ruess, Martin A1 - Schillinger, Dominik T1 - A parameter-free variational coupling approach for trimmed isogeometric thin shells JF - Computational Mechanics Y1 - 2017 U6 - https://doi.org/10.1007/s00466-016-1368-x SN - 1432-0924 VL - 59 IS - 4 SP - 693 EP - 715 PB - Springer ER - TY - JOUR A1 - Keshavanarayana, Pradeep A1 - Ruess, Martin A1 - de Borst, René T1 - A feedback-loop extended stress fiber growth model with focal adhesion formation JF - International Journal of Solids and Structures Y1 - 2017 U6 - https://doi.org/10.1016/j.ijsolstr.2017.08.023 SN - 0020-7683 N1 - Open Archive VL - 128 SP - 160 EP - 173 PB - Elsevier ER - TY - JOUR A1 - Nguyen, Lam H. A1 - Stoter, Stein K.F. A1 - Baum, Thomas A1 - Kirschke, Jan A1 - Ruess, Martin A1 - Yosibash, Zohar A1 - Schillinger, Dominik T1 - Phase-field boundary conditions for the voxel finite cell method: Surface-free stress analysis of CT-based bone structures JF - International Journal for Numerical Methods in Biomedical Engineering Y1 - 2017 UR - http://www.ncbi.nlm.nih.gov/pubmed/28294574 U6 - https://doi.org/10.1002/cnm.2880 SN - 2040-7947 VL - 33 IS - 12 PB - Wiley ER - TY - JOUR A1 - Zander, Nils A1 - Ruess, Martin A1 - Bog, Tino A1 - Kollmannsberger, Stefan A1 - Rank, Ernst T1 - Multi-level hp -adaptivity for cohesive fracture modeling JF - International Journal for Numerical Methods in Engineering Y1 - 2017 U6 - https://doi.org/10.1002/nme.5340 SN - 1097-0207 VL - 109 IS - 13 SP - 1723 EP - 1755 PB - Wiley ER - TY - BOOK A1 - Niemann, Jörg A1 - Pisla, Adrian T1 - Life-Cycle Management of Machines and Mechanisms T3 - Mechanisms and Machine Science Y1 - 2021 SN - 978-3-030-56447-6 U6 - https://doi.org/10.1007/978-3-030-56449-0 VL - 90 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Fussenecker, Claudia A1 - Niemann, Jörg A1 - Paul, Alexander A1 - Schlösser, Martin A1 - Schöning, Marius ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Educating Future Engineers – Meeting Challenges at Secondary School and University T2 - Systems, Software and Services Process Improvement Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_56 SP - 742 EP - 753 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Kretschmar, Dominik A1 - Niemann, Jörg A1 - Müller, Felix ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Spin-Off Strategies of Established Companies Due to Digitalization and Disruption T2 - Systems, Software and Services Process Improvement Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_58 SP - 772 EP - 782 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Macher, Georg A1 - Brenner, Eugen A1 - Messnarz, Richard A1 - Ekert, Damjan A1 - Stolfa, Jakub A1 - Stolfa, Svatopluk A1 - Niemann, Jörg A1 - Fussenecker, Claudia A1 - Schoening, Marius A1 - Paul, Alexander A1 - Pavlov, Nikolay A1 - Gigov, Boyko A1 - Pavlova, Maria Stefanova ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - A Study of Electric Powertrain Engineering - Its Requirements and Stakeholders Perspectives T2 - Systems, Software and Services Process Improvement Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_29 SP - 396 EP - 407 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Niemann, Jörg A1 - Fussenecker, Claudia A1 - Schlösser, Martin ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Toolbox of Methods for the Digital Business Transformation T2 - Systems, Software and Services Process Improvement KW - FBMV Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_59 SP - 783 EP - 793 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Wendland, André A1 - Bumann, Marc A1 - Martin, Shane A1 - Niemann, Jörg A1 - Bosman, Stephen ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Optimizing System Design Through Thermal Analysis with Cubesatellite as Case Study T2 - Systems, Software and Services Process Improvement Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_30 SP - 408 EP - 420 PB - Springer Nature Switzerland CY - Cham ER - TY - GEN ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Systems, Software and Services Process Improvement T2 - Communications in Computer and Information Science Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4 VL - 1251 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Ardelean-Baidoc, Raluca A1 - Oniga, Gabriel A1 - Niemann, Jörg A1 - Sava, Adriana A1 - Pîslă, Adrian A1 - (Keine Angabe), T1 - Change Management Aspects in Developing the International Airport “Avram Iancu” Cluj T2 - The proceedings of the 14th European Conference on Innovation and Entrepreneurship, 19-20 September 2019 Y1 - 2019 SN - 9781912764358 U6 - https://doi.org/10.34190/ECIE.19.092 PB - ACPI ER - TY - CHAP A1 - Niemann, Jörg A1 - Fussenecker, Claudia A1 - Schlösser, Martin ED - Walker, Alastair ED - O'Connor, Rory V. ED - Messnarz, Richard T1 - Eye Tracking for Quality Control in Automotive Manufacturing T2 - Systems, Software and Services Process Improvement Y1 - 2019 SN - 978-3-030-28004-8 U6 - https://doi.org/10.1007/978-3-030-28005-5_22 SP - 289 EP - 298 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Linditsch, Claudia A1 - Fussenecker, Claudia A1 - Niemann, Jörg A1 - Messnarz, Richard A1 - Penz, Eva A1 - Casey, Anette A1 - Stolfa, Jakub ED - Larrucea, Xabier ED - Santamaria, Izaskun ED - O'Connor, Rory V. ED - Messnarz, Richard T1 - ELIC – Building the New Generation of Engineers for Automotive in Europe T2 - Systems, Software and Services Process Improvement. 25th European Conference, EuroSPI 2018, Bilbao, Spain, September 5-7, 2018, Proceedings Y1 - 2018 SN - 978-3-319-97924-3 U6 - https://doi.org/10.1007/978-3-319-97925-0_55 SP - 654 EP - 665 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Guo, Yujie A1 - Ruess, Martin T1 - Nitsche’s method for a coupling of isogeometric thin shells and blended shell structures JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2015 U6 - https://doi.org/10.1016/j.cma.2014.11.014 SN - 0045-7825 VL - 284 SP - 881 EP - 905 PB - Elsevier ER - TY - JOUR A1 - Guo, Yujie A1 - Ruess, Martin T1 - Weak Dirichlet boundary conditions for trimmed thin isogeometric shells JF - Computers & Mathematics with Applications Y1 - 2015 U6 - https://doi.org/10.1016/j.camwa.2015.06.012 SN - 0898-1221 N1 - Open Archiv VL - 70 IS - 7 SP - 1425 EP - 1440 PB - Elsevier ER - TY - JOUR A1 - Kollmannsberger, Stefan A1 - Özcan, Ali I. A1 - Baiges, J. A1 - Ruess, Martin A1 - Rank, Ernst A1 - Reali, A. T1 - Parameter-free, weak imposition of Dirichlet boundary conditions and coupling of trimmed and non-conforming patches JF - International Journal for Numerical Methods in Engineering Y1 - 2015 U6 - https://doi.org/10.1002/nme.4817 SN - 1097-0207 VL - 101 IS - 9 SP - 670 EP - 699 PB - Wiley ER - TY - JOUR A1 - Liang, Ke A1 - Zhang, YongJie A1 - Sun, Qin A1 - Ruess, Martin T1 - A new robust design for imperfection sensitive stiffened cylinders used in aerospace engineering JF - Science China Technological Sciences KW - peer Y1 - 2015 U6 - https://doi.org/10.1007/s11431-015-5793-4 SN - 1869-1900 VL - 58 IS - 5 SP - 796 EP - 802 PB - Springer ER - TY - JOUR A1 - Schillinger, Dominik A1 - Ruess, Martin T1 - The Finite Cell Method: A Review in the Context of Higher-Order Structural Analysis of CAD and Image-Based Geometric Models JF - Archives of Computational Methods in Engineering Y1 - 2015 U6 - https://doi.org/10.1007/s11831-014-9115-y SN - 1886-1784 VL - 22 IS - 3 SP - 391 EP - 455 PB - Springer ER - TY - JOUR A1 - Guo, Yujie A1 - Ruess, Martin A1 - Gürdal, Zafer T1 - A contact extended isogeometric layerwise approach for the buckling analysis of delaminated composites JF - Composite Structures Y1 - 2014 U6 - https://doi.org/10.1016/j.compstruct.2014.05.006 SN - 0263-8223 VL - 116 SP - 55 EP - 66 PB - Elsevier ER - TY - JOUR A1 - Liang, Ke A1 - Ruess, Martin A1 - Abdalla, Mostafa T1 - The Koiter–Newton approach using von Kármán kinematics for buckling analyses of imperfection sensitive structures JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2014 U6 - https://doi.org/10.1016/j.cma.2014.07.008 SN - 0045-7825 VL - 279 SP - 440 EP - 468 PB - Elsevier ER - TY - JOUR A1 - Ruess, Martin A1 - Schillinger, Dominik A1 - Özcan, Ali I. A1 - Rank, Ernst T1 - Weak coupling for isogeometric analysis of non-matching and trimmed multi-patch geometries JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2014 U6 - https://doi.org/10.1016/j.cma.2013.10.009 SN - 0045-7825 VL - 269 SP - 46 EP - 71 PB - Elsevier ER - TY - JOUR A1 - Zander, Nils A1 - Bog, Tino A1 - Elhaddad, Mohamed A1 - Espinoza, R. A1 - Hu, H. A1 - Joly, A. A1 - Wu, C. A1 - Zerbe, P. A1 - Düster, Alexander A1 - Kollmannsberger, Stefan A1 - Parvizian, J. A1 - Ruess, Martin A1 - Schillinger, Dominik A1 - Rank, Ernst T1 - FCMLab: A finite cell research toolbox for MATLAB JF - Advances in Engineering Software Y1 - 2014 U6 - https://doi.org/10.1016/j.advengsoft.2014.04.004 SN - 0965-9978 VL - 74 SP - 49 EP - 63 PB - Elsevier ER - TY - JOUR A1 - Ruess, Martin A1 - Schillinger, Dominik A1 - Bazilevs, Yuri A1 - Varduhn, Vasco A1 - Rank, Ernst T1 - Weakly enforced essential boundary conditions for NURBS-embedded and trimmed NURBS geometries on the basis of the finite cell method JF - International Journal for Numerical Methods in Engineering Y1 - 2013 U6 - https://doi.org/10.1002/nme.4522 SN - 1097-0207 VL - 95 IS - 10 SP - 811 EP - 846 PB - Wiley ER - TY - BOOK A1 - Kiel, Jürgen T1 - Einführung in die elektrische Energie- und Antriebstechnik N2 - Die zunehmende Automatisierung und der sensible Umgang mit (elektrischer) Energie spielen in der gesellschaftlichen Diskussion eine zunehmende Rolle. Die technischen Hintergründe sind hierbei nicht nur für die jeweiligen Experten von Bedeutung, sondern sind auch selbstverständlich Grundlagenwissen im Maschinenbau, in der Verfahrenstechnik und in der Energietechnik. Für genau diese Zielgruppe ist dieses Buch konzipiert. Um eine möglichst große Bandbreite an Themen abzudecken, wurde in vielen Bereichen vereinfacht, verkürzt und verallgemeinert, um zumindest den Kern der jeweiligen Problematik verständlich zu machen. Daher wird auch als Voraussetzung lediglich das Verständnis des elektrischen Kreises mit ohm’schen, induktiven und kapazitiven Verbrauchern erwartet. Außerdem wurde der Spagat zwischen Grundlagen- und Praxiswissen gewagt. KW - Leistungselektronik KW - Drehstrommaschine KW - Frequenzumrichter KW - Maschinenbau KW - Gleichstrommaschine KW - Einführung KW - Transformator KW - Servoregler Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-23945 SN - 978-3-941334-31-1 CY - Düsseldorf ER - TY - THES A1 - Biedermann, Till M. T1 - Aeroacoustic transfer of leading edge serrations from single aerofoils to low-pressure fan applications N2 - Leading edge serrations are well-known for their aeroacoustic potential in reducing aerofoil-turbulence interaction noise and are also associated with certain aerodynamic advantages. To prepare leading edge serrations for industrial application, two obstacles remain to be addressed. First is a combined analysis of the aeroacoustic and the aerodynamic performance of leading edge serrations to develop optimum designs. Second is the need to examine the transferability of the known effects of leading edge serrations from a single aerofoil to full rotors, which are considered to be the final area of application. This thesis aims to assist in the transfer of a well-investigated aerofoil with serrated leading edges from the rigid to the rotating domain. With this purpose, a single aerofoil type is selected and thoroughly analysed, experimentally and numerically, to generate a reliable data basis for aerodynamic performance and noise reduction capability. Aside from gathering information on the overall performance, the spatial distribution of the noise sources is localised, and the spectral composition of the noise reduction is found to follow a clearly defined scaling law. Aerodynamically, generated vortices are found to be responsible for a complex three-dimensional separation mechanism of the leading edge serrations, causing a delay of stall. The generated data basis is then used to design low-pressure axial fans of minimum complexity by keeping the initially chosen aerofoil type. The experimentally identified noise reduction mechanisms for the serrated axial fans are found to be more diverse than the single aerofoil and highly dependent on the inflow conditions and the operation point of the fan. A highly similar pattern for the spectral scaling of the noise reduction supports the finding that at optimum operation conditions, the previously identified noise reduction mechanisms for the single aerofoils are transferable to the rotating domain. On the other hand, additional aerodynamic mechanisms are found to dominate the noise reduction for the instability region of the fan, also contributing to reduced blade-to-blade interaction effects. Moreover, the blade-tip leakage flow is altered by delaying the development of coherent structures. The next step towards a more general description of the aeroacoustic and aerodynamic dependencies is developing a comprehensive model based on artificial neural networks. This model allows a combined analysis of the aerodynamic and acoustic performance of rotors with serrated leading edges and shows an accurate prediction of the overall performance and the spectral composition of the radiated noise. It also enables the development of multi-objective optima for serration designs and motivates further studies into the generalisability of the observed trends. Furthermore, the developed model represents a feasible tool to create tailored serration designs for maximum efficiency in both aeroacoustics and aerodynamics, contributing to the development of future low-noise fans and rotating machinery. N2 - Leading Edge Serrations sind hinlänglich für ihr Potential zur Reduktion von turbulenzinduziertem Schall bekannt. Ebenso können sie sich als aerodynamisch vorteilhaft erweisen. Mit dem Ziel, Leading Edge Serrations industriellen Anwendungen zugänglich zu machen, verbleiben primär noch zwei Hemmnisse. Zum einen die Notwendigkeit einer kombinierten Bewertung des aerodynamischen und des aeroakustischen Potentials mit dem Ziel der Identifikation optimaler Designansätze. Zum anderen sind Aussagen hinsichtlich der Übertragbarkeit der bekannten Schallreduktionsmechanismen von einem einzelnen Tragflügel hin zu rotierenden Strömungsmaschinen zu treffen, da letztere das finale Anwendungsgebiet von Leading Edge Serrations darstellen. Diese Arbeit zielt darauf ab, bei dem Transfer eines umfassend analysierten Tragflügeldesigns mit Leading Edge Serrations hin zu einem rotierenden System zu assistieren. Hierzu wird ein für spätere rotierende Anwendungen sinnvolles Tragflügelprofil gewählt und sowohl experimentell als auch numerisch umfassend untersucht, um eine Datenbasis des aerodynamischen und aeroakustischen Potentials zu generieren. Neben Informationen über die globalen Eigenschaften, wurde ebenfalls die räumliche Lage der Schallquellen lokalisiert. Zudem konnte der Verlauf des spektralen Schallreduktionsvermögens einer klaren Gesetzmäßigkeit zugeordnet werden. In Bezug auf die Aerodynamik wurden Wirbelstrukturen, welche sich an den Leading Edge Serrations bilden, als ursächlich für einen komplexen dreidimensionalen Ablösemechanismus identifiziert, welcher eine verzögerte Strömungsablösung bewirkt. Unter Beibehaltung des gewählten Tragflügelprofils wurde die generierte Datenbasis in einem zweiten Schritt zur Auslegung von axialen Niederdruckventilatoren niedriger Komplexität genutzt. Die hier experimentell identifizieren Schallreduktionsmechanismen sind, im Vergleich zu einem einzelnen Tragflügel, deutlich diverser und weisen eine klare Abhängigkeit vom Betriebspunkt des Ventilators sowie von den Einflussparametern auf. Unter optimalen Zuströmbedingungen kann eine klare Übertragbarkeit der Effekte vom ebenen in das rotierende System gezeigt werden. Im Gegensatz wird das Schallreduktionspotential im Instabilitätsbereich des Ventilators durch aerodynamische Strömungsphänomene dominiert, welche zudem zu einer vorteilhaften Beeinflussung von Schaufelinteraktionen beitragen. Des Weiteren wurde durch den Einsatz von Rotoren mit Leading Edge Serrations eine verzögerte Entstehung von kohärenten Strukturen im Blattspitzenbereich nachgewiesen. Um einen weiteren Schritt in Richtung einer globalen Beschreibung der erhaltenen aeroakustischen und aerodynamischen Abhängigkeiten zu gehen, wurde ein umfassendes Modell generiert, welches auf dem Training künstlicher neuronaler Netze beruht. Das generierte Modell ermöglicht eine kombinierte Prognose der aerodynamischen und aeroakustischen Performance der getesteten Prototypen und weist sowohl im Zeitbereich als auch hinsichtlich der spektralen Zusammensetzung der Signale eine hohe Prognosegüte auf. Dies ermöglicht die Definition multikriterieller Optima bezüglich des Serration Designs und motiviert weiterführende Studien hinsichtlich einer Generalisierbarkeit der beobachteten Trends. Schlussendlich ermöglicht das generierte Modell maßgeschneiderte Designansätze für eine maximale aerodynamische und aeroakustische Effizienz, was einen sinnvollen Beitrag zur zukünftigen Entwicklungen schallarmer Ventilatoren und Strömungsmaschinen darstellt. T2 - Strömungsakustischer Transfer von Leading Edge Serrations an einzelnen Tragflügeln hin zu Niederdruck-Axialventilatoren KW - aeroacoustics KW - aerodynamics KW - low-pressure axial fan KW - leading edge serrations KW - artificial neural networks KW - künstliche neuronale Netze KW - Vorderkantenzacken KW - Niederdruck-Axialventilatoren KW - Aerodynamik KW - Strömungsakustik Y1 - 2019 U6 - https://doi.org/10.14279/depositonce-9075 PB - Technische Universität Berlin CY - Berlin ER - TY - RPRT A1 - Deckert, Carsten A1 - Schomaker, Rahel M. A1 - Knappitsch, Eithne T1 - Culture and Entrepreneurship: The Political, Social and Individual Influences on Opportunity Entrepreneurs N2 - The impact of culture on entrepreneurship is a widely accepted phenomenon. Cultural factors influence entrepreneurship via different mechanisms on the macro-, meso-, and micro-level of a country. Building on existing research, we draw a clear link between national cultural dimensions and entrepreneurship, using a new model that arranges different cultural dimensions in groups based on their particular function: political, social, or individual (PSI-model) and that distinguishes between values and practices where relevant. The PSI-model provides a coherent theoretical framework on which different cultural dimensions and their impact on entrepreneurship can be analysed, allowing for particular attention to be drawn to social practices and social values. This paper contributes to a better understanding of the relationship between culture and entrepreneurship, providing empirical evidence of how specific cultural dimensions influence entrepreneurship. The findings are of relevance from a policy perspective and can be used to generate practical recommendations for national institutions interested in promoting entrepreneurship and entrepreneurial activities. The findings are also transferable to other fields related to national cultural dimensions such as level of innovation, investment, budgeting etc. T3 - Working Papers in Industrial Engineering - 3 KW - Entrepreneurship KW - Cultural Dimensions KW - National Culture KW - PSI Model Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-23837 SN - 2627-8375 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - RPRT A1 - Niemann, Jörg A1 - Bruckmann, Julian A1 - Krautzer, Florian T1 - Green City Deals: A study on the global warming potential of alternative urban transportation systems N2 - The population is growing constantly in urban areas. This results in an increasing demand for mobility solutions while it is also worldwide aimed to reduce greenhouse gas emissions. This paper summarizes the results of a comparative study concerning the greenhouse gas emissions (based on carbon footprint) caused by alternative urban passenger transportation systems. The emissions for the vehicles and their infrastructure are analyszed over the entire life cycle from manufacturing up to their end of life. An existing cable car sytem in La Paz, Bolivia was analysed and evaluated in comparison to other modes of transportation such as small busses, large busses and a tram. According to the system definitions and the considered balance framework the study shows that beside the use of the systems the materials and the manufacturing as well as the infrastructure have a significant impact on the total emissions over the life cycle. To put focus on the „true and real“ impacts to the society it is preferable to consider the measurement results in total absolute emissions. KW - Carbon footprint KW - urban mobility KW - cable car KW - bus KW - tram KW - transport planning KW - city planning Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-28972 CY - Düsseldorf ER - TY - JOUR A1 - Deckert, Carsten A1 - Mohya, Ahmed T1 - Kreativitätstechniken für angehende Ingenieurinnen und Ingenieure JF - Innovations-Forum N2 - In Zeiten fortschreitender Digitalisierung und zunehmender Transparenz auf den Märkten müssen sich Unternehmen mit zunehmenden Veränderungen, z. B. durch Prozess- und Produktinnovationen, auseinandersetzen. Es ist daher unerlässlich, dass sich angehende Ingenieurinnen und Ingenieure mit dem Prozess der Ideenfindung und der damit verbundenen Innovationsbereitschaft auseinandersetzen. Kreativität spielt eine entscheidende Rolle im Prozess der Ideengenerierung und Problemlösung. Hochschulen, die Ingenieurstudiengänge anbieten, sind daher gefordert, die entsprechenden Fähigkeiten zu vermitteln. Durch den gezielten Einsatz von Kreativitätstechniken kann die Kreativität gefördert werden. Der vorliegende Beitrag befasst sich mit der Bewertung unterschiedlicher Kreativitätstechniken und geht der Frage nach, welche Kreativitätstechniken sich eignen, den angehenden Ingenieurinnen und Ingenieuren beim kreativen Problemlösen zu unterstützen. KW - Kreativität KW - Innovation Y1 - 2020 VL - 18 IS - 1 SP - 42 EP - 46 PB - InnoFo ER - TY - JOUR A1 - Deckert, Carsten A1 - Kalefeld, Jannik A1 - Kutz, Martin T1 - Geschäftsmodelle für das Internet der Dinge: Welche Geschäftsmodellinnovation passt zum Unternehmen? JF - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb Y1 - 2020 U6 - https://doi.org/10.3139/104.112265 SN - 0947-0085 VL - 115 IS - 12 SP - 928 EP - 933 PB - Hanser ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Guin, Anindya A1 - Benim, Ali Cemal T1 - Investigation of Inclined Turbulators for Heat Transfer Enhancement in a Solar Air Heater JF - Heat Transfer Engineering Y1 - 2019 U6 - https://doi.org/10.1080/01457632.2018.1474593 VL - 40 IS - 17/18 SP - 1451 EP - 1460 PB - Taylor & Francis ER - TY - JOUR A1 - Deckert, Carsten A1 - Schomaker, Rahel M. T1 - Cultural Impacts on National Innovativeness: Not Every Cultural Dimension Is Equal JF - Cross-Cultural Research Y1 - 2019 U6 - https://doi.org/10.1177/1069397118799700 VL - 53 IS - 2 SP - 186 EP - 214 PB - sage journals ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Çiçek, Aydın A1 - Eker, Arif Mert T1 - A Computational Investigation of the Thermohydraulics of an EGS Project JF - Journal of Thermal Science Y1 - 2018 U6 - https://doi.org/10.1007/s11630-018-1033-0 SN - 1003-2169 SN - 1993-033X VL - 27 IS - 5 SP - 405 EP - 412 PB - Springer ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael A1 - Pfeiffelmann, Björn T1 - Aerodynamic Optimization of Airfoil Profiles for Small Horizontal Axis Wind Turbines JF - Computation KW - DOAJ Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-25143 SN - 2079-3197 VL - 6 IS - 2 PB - MDPI ER - TY - JOUR A1 - Guo, Yujie A1 - Zou, Zhihui A1 - Ruess, Martin T1 - Isogeometric multi-patch analyses for mixed thin shells in the framework of non-linear elasticity JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2021 U6 - https://doi.org/10.1016/j.cma.2021.113771 SN - 0045-7825 VL - 380 SP - 49 EP - 52 PB - Elsevier ER - TY - CHAP A1 - Anton, Johan A1 - Nebel, Janine A1 - Froese, Christian A1 - Kleinschmidt, Ralph A1 - Quandt, Thomas A1 - Ruland, Holger A1 - Kaluza, Stefan A1 - Muhler, Martin ED - Ernst, Stefan T1 - Higher alcohol synthesis over Na-modified Co-Cu catalysts: Co2C formation and effect of surface composition T2 - Preprints of the DGMK-Conference "Synthesis Gas Chemistry", October 7 - 9, 2015, Dresden N2 - Cu–Co-based model catalysts were prepared by a sophisticated alkali-free synthesis method and tested in the conversion of synthesis gas to higher alcohols. MoO3-coated alumina was used as the support, providing both high specific surface area and strongly interacting sites for the deposition of the active metals. A bulk Cu/Co ratio of ~2 was found to be most suitable in terms of activity and product distribution. Surface enrichment of Mo for all samples was observed by XPS, which significantly influenced the performance of the catalysts. Mo was found to be both a structural and a chemical promoter. Strong metal–support interactions were further achieved by modification of alumina with magnesia. With 12 wt% Mg incorporated, the catalysts showed 40% total oxygenate selectivity including 11% selectivity to ethanol. Y1 - 2015 SN - 978-3-941721-56-2 VL - DGMK Tagungsbericht, 2015,2 PB - DGMK CY - Hamburg ER - TY - JOUR A1 - Anton, Johan A1 - Nebel, Janine A1 - Song, Huiqing A1 - Froese, Christian A1 - Weide, Philipp A1 - Ruland, Holger A1 - Muhler, Martin A1 - Kaluza, Stefan T1 - Structure–activity relationships of Co-modified Cu/ZnO/Al2O3 catalysts applied in the synthesis of higher alcohols from synthesis gas JF - Applied Catalysis A: General Y1 - 2015 U6 - https://doi.org/10.1016/j.apcata.2015.07.002 SN - 0926-860X VL - 505 SP - 326 EP - 333 PB - Elsevier ER - TY - JOUR A1 - Anton, Johan A1 - Nebel, Janine A1 - Göbel, Christoph A1 - Gabrysch, Thomas A1 - Song, Huiqing A1 - Froese, Christian A1 - Ruland, Holger A1 - Muhler, Martin A1 - Kaluza, Stefan T1 - CO Hydrogenation to Higher Alcohols over Cu–Co-Based Catalysts Derived from Hydrotalcite-Type Precursors JF - Topics in Catalysis Y1 - 2016 UR - https://doi.org/10.1007/s11244-016-0663-2 U6 - https://doi.org/10.1007/s11244-016-0663-2 VL - 59 IS - 15-16 SP - 1361 EP - 1370 PB - Springer Nature ER - TY - JOUR A1 - Anton, Johan A1 - Nebel, Janine A1 - Song, Huiqing A1 - Froese, Christian A1 - Weide, Philipp A1 - Ruland, Holger A1 - Muhler, Martin A1 - Kaluza, Stefan T1 - The effect of sodium on the structure–activity relationships of cobalt-modified Cu/ZnO/Al2O3 catalysts applied in the hydrogenation of carbon monoxide to higher alcohols JF - Journal of Catalysis Y1 - 2016 U6 - https://doi.org/10.1016/j.jcat.2015.12.016 SN - 0021-9517 VL - 335 SP - 175 EP - 186 PB - Elsevier ER - TY - JOUR A1 - Anton, Johan A1 - Ruland, Holger A1 - Kaluza, Stefan A1 - Muhler, Martin T1 - Fast and Reproducible Testing of Cu–Co-Based Catalysts Applied in the Conversion of Synthesis Gas to Ethanol and Higher Alcohols JF - Catalysis Letters Y1 - 2015 U6 - https://doi.org/10.1007/s10562-015-1543-2 N1 - The work was part of the project “Bioethanol from synthesis gas—BETSY”, funded by the Ministry for Economy, Energy, Building, Habitation and Transportation of Northrhine-Westphalia within the program Ziel2.NRW financed by the European Union through the European regional development fund ERDF. VL - 145 IS - 7 SP - 1374 EP - 1381 PB - Springer ER - TY - JOUR A1 - Bordoloi, Ankur A1 - Sanchez, Miguel A1 - Noei, Heshmat A1 - Kaluza, Stefan A1 - Großmann, Dennis A1 - Wang, Yuemin A1 - Grünert, Wolfgang A1 - Muhler, Martin T1 - Catalytic Behaviour of Mesoporous Cobalt-Aluminum Oxides for CO Oxidation JF - Journal of Catalysts Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-34344 SN - 2314-5110 SP - 1 EP - 9 PB - Hindawi ER - TY - JOUR A1 - Boz, İsmail A1 - Kaluza, Stefan A1 - Boroğlu, Mehtap Şafak A1 - Muhler, Martin T1 - Synthesis of high surface area ZnO powder by continuous precipitation JF - Materials Research Bulletin Y1 - 2012 U6 - https://doi.org/10.1016/j.materresbull.2012.02.005 SN - 1873-4227 VL - 47 IS - 5 SP - 1185 EP - 1190 PB - Elsevier ER - TY - JOUR A1 - Engel, Rebecca V. A1 - Kaluza, Stefan A1 - Oezaslan, Mehtap A1 - Peitz, Stephan T1 - German Catalysis Meeting - 50 Years and as Young as Ever JF - ChemCatChem Y1 - 2017 U6 - https://doi.org/10.1002/cctc.201700683 SN - 1867-3899 VL - 9 IS - 11 SP - 2018 EP - 2020 PB - Wiley ER - TY - CHAP A1 - Gottschald, Jonas A1 - Reich, Marius A1 - Adam, Mario A1 - Leibauer, R. T1 - Selbstlernende Betriebsoptimierung einer hybriden Nahwärmeversorgung T2 - Fachkonferenz Digitalisieren - Sektoren koppeln - Flexibilisieren, 24.11.2020, Berlin KW - BestHeatNet Y1 - 2020 CY - Berlin ER - TY - JOUR A1 - Reich, Marius A1 - Gottschald, Jonas A1 - Riegebauer, Philipp A1 - Adam, Mario T1 - Predictive Control of District Heating System Using Multi-Stage Nonlinear Approximation with Selective Memory JF - Energies KW - BestHeatNet KW - DOAJ Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-33627 SN - 1996-1073 VL - 13 IS - 24 PB - MDPI ER - TY - CHAP A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Reich, Marius A1 - Götzelmann, Dennis T1 - BestHeatNet – Selbstlernende Betriebsoptimierung einer hybriden Nahwärmeversorgung T2 - Der Geothermiekongress, 19.-21.11.2019, München KW - BestHeatNet Y1 - 2019 UR - https://www.der-geothermiekongress.de/fileadmin/user_upload/DGK/DGK_2019/Teilnahme/P12_Gottschald_BestHeatNet-124.pdf CY - München ER - TY - CHAP A1 - Biedermann, Till M. A1 - Reich, Marius A1 - Kameier, Frank A1 - Adam, Mario A1 - Paschereit, C. T1 - Assessment of Statistical Sampling Methods and Approximation Models Applied to Aeroacoustic and Vibroacoustic Problem T2 - NOVEM - 6th conference on Noise and Vibration emerging methods, 07.-09.05.2018, Ibiza / Spain Y1 - 2018 CY - Ibiza ER - TY - CHAP A1 - Gottschald, Jonas A1 - Adam, Mario A1 - Reich, Marius T1 - Multi-Objective Optimization of a District Heating Networks Energy Supply Systems Structure and Dimension T2 - SDH - 5th International Solar District Heating Conference, 11.-12.04.2018, Graz / Austria KW - Fast-Energy-Design Y1 - 2018 UR - https://www.researchgate.net/publication/325896757_Robust_Optimization_of_District_Heating_Networks_Structure_and_Dimension_combining_Metamodels_and_Multi-Objective_Optimization CY - Graz ER - TY - CHAP A1 - Helbig, Sonja A1 - Eggert, Daniel A1 - Adam, Mario T1 - Einfluss von Speicheranschlusshöhen und geschichteter Speicherbe- und -entladung auf die Effizienz solarer Kombisysteme im Mehrfamilienhaus T2 - Symposium Thermische Solarenergie – Energiewende Wärme, 13.-15.06.2018, Bad Staffelstein KW - SUW-MFH Y1 - 2018 CY - Bad Staffelstein ER - TY - CHAP A1 - Ille, Fabian A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Wirth, Hans Peter T1 - Analysis of Ageing Phenomena for Big Solar Thermal Plants T2 - ECOS - 31th International Conference on Efficiency, Cost, Optimization, Simulation and Enviromental Impact of Energy Systems, 17.-21.06.2018, Guimaraes / Portugal KW - ST2000-LangEff Y1 - 2018 UR - https://www.researchgate.net/publication/326147054_Analysis_of_Ageing_Phenomena_for_Big_Solar_Thermal_Plants CY - Guimaraes ER - TY - CHAP A1 - Nolting, Lars A1 - Spiegel, Thomas A1 - Reich, Marius A1 - Adam, Mario A1 - Praktiknjo, Aaron T1 - Can Energy System Modeling benefit from Artificial Neural Networks? Application of Two-Stage Metamodels to Reduce Computation of Security of Supply Assessments (Best Application Paper Award) T2 - CIE – 48th International Conference on Computers & Industrial Engineering, 02.-05.12.2018, Auckland / New Zealand KW - KIVi Y1 - 2018 CY - Auckland ER - TY - CHAP A1 - Reich, Marius A1 - Adam, Mario A1 - Gottschald, Jonas T1 - Robust Optimization of District Heating Networks Structure and Dimension combining Metamodels and Multi-Objective Optimization T2 - ECOS - 31th International Conference on Efficiency, Cost, Optimization, Simulation and Enviromental Impact of Energy Systems, 17.-21.06.2018, Guimaraes / Portugal KW - EnergyExpert Y1 - 2018 UR - https://www.researchgate.net/publication/325896757_Robust_Optimization_of_District_Heating_Networks_Structure_and_Dimension_combining_Metamodels_and_Multi-Objective_Optimization CY - Guimaraes ER - TY - CHAP A1 - Spiegel, Thomas A1 - Backes, Klaus A1 - Adam, Mario A1 - Helbig, Sonja A1 - Eggert, Daniel T1 - Best-Practice-Lösungen für Mehrfamilienhäuser mit Solaranlage T2 - Symposium Thermische Solarenergie – Energiewende Wärme, 13.-15.06.2018, Bad Staffelstein KW - SUW-MFH Y1 - 2018 CY - Bad Staffelstein ER - TY - JOUR A1 - Engeldahl, Barthel A1 - Özaslan, Mehtap A1 - Marschall, Roland A1 - Rose, Marcus A1 - Kaluza, Stefan A1 - Titus, Juliane A1 - Sprung, Christoph T1 - Weimar 2015: Catalysing Tomorrow’s Solutions JF - ChemCatChem Y1 - 2015 U6 - https://doi.org/10.1002/cctc.201500435 SN - 1867-3899 VL - 7 IS - 12 SP - 1794 EP - 1796 PB - Wiley ER - TY - JOUR A1 - Girod, Kai A1 - Breitkreuz, Klaas A1 - Henning, Torsten A1 - Lohmann, Heiko A1 - Kaluza, Stefan A1 - Schluter, Stefan T1 - Steel Mills as Syngas Source for Methanol Synthesis: Simulation and Practical Performance Investigations JF - Chemical Engineering Transactions N2 - In the present contribution, the utilization of steel-mill gases for an industrial methanol synthesis process is described. The focus of this work is on the influence of syngas compositions derived from steel-mill gases on an industrial Cu/ZnO/Al2O3 catalyst. Elevated CO2 and H2O concentrations seem to have an irreversible impact on the activity of the catalyst. In order to obtain realistic gas composition for the catalyst tests, a process simulation of the methanol synthesis was conducted. The calculated gas compositions at the reactor inlet were applied in a practical test in order to evaluate the catalyst stability under steel mill gas conditions. No noticeable deactivation was observed. KW - DOAJ Y1 - 2019 SN - 978-88-95608-71-6 U6 - https://doi.org/10.3303/CET1974080 SN - 2283-9216 VL - 74 SP - 475 EP - 480 PB - AIDIC ER - TY - JOUR A1 - Girod, Kai A1 - Breitkreuz, Klaas A1 - Gerstner, Andrea A1 - Marzi, Thomas A1 - Schulzke, Tim A1 - Kaluza, Stefan T1 - Close‐to‐Practice Investigations of Heterogeneously Catalyzed Syngas Conversions in Slurry and Fixed‐Bed Reactor Systems JF - Chemie Ingenieur Technik Y1 - 2018 U6 - https://doi.org/10.1002/cite.201700143 SN - 1522-2640 VL - 90 IS - 5 SP - 690 EP - 695 PB - Wiley ER - TY - JOUR A1 - Girod, Kai A1 - Lohmann, Heiko A1 - Kaluza, Stefan T1 - Methanol Synthesis with Steel Mill Gases: Performance Investigations in an On‐Site Technical Center JF - Chemie Ingenieur Technik KW - DEAL Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-34409 SN - 1522-2640 N1 - he investigations within the scope of the project Carbon2Chem® are funded by the German Federal Ministry of Education and Research (BMBF; support code: 03EK3039F). We also thank our project partners in the Carbon2Chem subproject L2 (methanol synthesis) for the trustful cooperation. Open access funding enabled and organized by Projekt DEAL. VL - 93 IS - 5 SP - 850 EP - 855 PB - Wiley ER - TY - CHAP A1 - Hamel, Christian A1 - Kaluza, Stefan A1 - Unger, Christoph ED - Ernst, Stefan T1 - Catalytic tar reforming of biomass-derived synthesis gas: Influence of the catalyst, gas composition and sulfur poisoning T2 - Preprints of the DGMK-Conference "Synthesis Gas Chemistry",October 7 - 9, 2015, Dresden Y1 - 2015 SN - 978-3-941721-56-2 VL - DGMK Tagungsbericht, 2015,2 SP - 139 EP - 146 PB - DGMK CY - Hamburg ER - TY - JOUR A1 - Heeskens, Denise A1 - Aghaei, Pedram A1 - Kaluza, Stefan A1 - Strunk, Jennifer A1 - Muhler, Martin T1 - Selective oxidation of ethanol in the liquid phase over Au/TiO 2 JF - physica status solidi (b) Y1 - 2013 U6 - https://doi.org/10.1002/pssb.201248440 SN - 1521-3951 VL - 250 IS - 6 SP - 1107 EP - 1118 PB - Wiley ER - TY - JOUR A1 - Junge Puring, Kai A1 - Piontek, Stefan A1 - Smialkowski, Mathias A1 - Burfeind, Jens A1 - Kaluza, Stefan A1 - Doetsch, Christian A1 - Apfel, Ulf-Peter T1 - Simple Methods for the Preparation of Non-noble Metal Bulk-electrodes for Electrocatalytic Applications JF - Journal of visualized experiments : JoVE N2 - The rock material pentlandite with the composition Fe4.5Ni4.5S8 was synthesized via high temperature synthesis from the elements. The structure and composition of the material was characterized via powder X-ray diffraction (PXRD), Mössbauer spectroscopy (MB), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and energy dispersive X-ray spectroscopy (EDX). Two preparation methods of pentlandite bulk electrodes are presented. In the first approach a piece of synthetic pentlandite rock is directly contacted via a wire ferrule. The second approach utilizes pentlandite pellets, pressed from finely ground powder, which is immobilized in a Teflon casing. Both electrodes, whilst being prepared by an additive-free method, reveal high durability during electrocatalytic conversions in comparison to common drop-coating methods. We herein showcase the striking performance of such electrodes to accomplish the hydrogen evolution reaction (HER) and present a standardized method to evaluate the electrocatalytic performance by electrochemical and gas chromatographic methods. Furthermore, we report stability tests via potentiostatic methods at an overpotential of 0.6 V to explore the material limitations of the electrodes during electrolysis under industrial relevant conditions. Y1 - 2017 UR - http://www.ncbi.nlm.nih.gov/pubmed/28671654 U6 - https://doi.org/10.3791/56087 SN - 1940-087X IS - 124 PB - JoVE ER - TY - JOUR A1 - Kaluza, Stefan A1 - Behrens, Malte A1 - Schiefenhövel, Nora A1 - Kniep, Benjamin A1 - Fischer, Richard A1 - Schlögl, Robert A1 - Muhler, Martin T1 - A Novel Synthesis Route for Cu/ZnO/Al2O3 Catalysts used in Methanol Synthesis: Combining Continuous Consecutive Precipitation with Continuous Aging of the Precipitate JF - ChemCatChem Y1 - 2011 U6 - https://doi.org/10.1002/cctc.201000329 SN - 1867-3899 VL - 3 IS - 1 SP - 189 EP - 199 PB - Wiley ER - TY - JOUR A1 - Kaluza, Stefan A1 - Muhler, Martin T1 - On the precipitation mechanism and the role of the post-precipitation steps during the synthesis of binary ZnO–Al2O3 composites with high specific surface area JF - Journal of Materials Chemistry KW - FBMV Y1 - 2009 U6 - https://doi.org/10.1039/b902004g SN - 1364-5501 VL - 19 IS - 23 SP - 3914 EP - 3922 PB - Royal Society of Chemistry (RSC) ER - TY - JOUR A1 - Kaluza, Stefan A1 - Muhler, Martin T1 - On the Role of Aging, Washing, and Drying in the Synthesis of Polycrystalline Zinc Oxide by Precipitation: Combining Fast Continuous Mixing, Spray Drying and Freeze Drying to Unravel the Solid-State Transformations of the Precipitate JF - Catalysis Letters Y1 - 2009 UR - 1572-879X U6 - https://doi.org/10.1007/s10562-008-9818-5 N1 - The authors gratefully acknowledge fruitful discussions with Malte Behrens and Robert Schlögl, and the financial support by the BMBF (Bundesministerium für Bildung und Forschung) within the scope of the project 01RI05028 “Entwicklung von Methanolsynthesekatalysatoren als Basis für nachhaltige Ressourcennutzung” VL - 129 IS - 3-4 SP - 287 EP - 292 PB - Springer ER - TY - JOUR A1 - Al-Sadawi, L. A1 - Biedermann, Till M. A1 - Fritsche, M. T1 - Passive Control of Vortex Shedding Noise of Circular Cylinders by Passive Air-Jet Blowing JF - Journal of Aerospace Engineering KW - Mechanical Engineering KW - Aerospace Engineering KW - General Materials Science KW - Civil and Structural Engineering Y1 - 2021 U6 - https://doi.org/10.1061/(asce)as.1943-5525.0001301 SN - 0893-1321 VL - 34 IS - 5 PB - American Society of Civil Engineers (ASCE) ER - TY - CHAP A1 - Deckert, Carsten A1 - Kalefeld, Jannik A1 - Kutz, Martin ED - Kumar, Vikas ED - Leng, Jiewu ED - Akberdina, Victoria ED - Kuzmin, Evgeny T1 - Business Model Innovation for the Internet of Things T2 - Lecture Notes in Information Systems and Organisation: Digital Twins and New Business Models Y1 - 2022 SN - 978-3-030-94617-3 U6 - https://doi.org/10.1007/978-3-030-94617-3_23 SN - 2195-4968 VL - LNISO,volume 54 SP - 321 EP - 333 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Adam, Mario T1 - Künstliche Intelligenz zur Betriebsoptimierung eines Nahwärmenetzes in Kempen mit verschiedenen regenerativen Energiequellen T2 - Berliner Energietage, 22. April 2021, Berlin KW - BestHeatNet Y1 - 2021 PB - Berliner ENERGIETAGE EUMB Pöschk CY - Düsseldorf ER - TY - JOUR A1 - Benim, Ali Cemal T1 - Numerical Calculation of Sink Velocities for Helminth Eggs in Water JF - Computation N2 - The settling velocities of helminth eggs of three types, namely Ascaris suum (ASC), Trichuris suis (TRI), and Oesophagostomum spp. (OES), in clean tap water are computationally determined by means of computational fluid dynamics, using the general-purpose CFD software ANSYS Fluent 18.0. The previous measurements of other authors are taken as the basis for the problem formulation and validation, whereby the latter is performed by comparing the predicted sink velocities with those measured in an Owen tube. To enable a computational treatment, the measured shapes of the eggs are parametrized by idealizing them in terms of elementary geometric forms. As the egg shapes show a variation within each class, “mean” shapes are considered. The sink velocities are obtained through the computationally obtained drag coefficients. The latter are defined by means of steady-state calculations. Predicted sink velocities are compared with the measured ones. It is observed that the calculated values show a better agreement with the measurements, for ASC and TRI, compared to the theoretical sink values delivered by the Stokes theory. However, the observed agreement is still found not to be very satisfactory, indicating the role of further parameters, such as the uncertainties in the characterization of egg shapes or flocculation effects even in clean tap water. KW - Applied Mathematics KW - Modeling and Simulation KW - General Computer Science KW - Theoretical Computer Science KW - DOAJ Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-37318 SN - 2079-3197 VL - 9 IS - 12 PB - MDPI ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - Water-Cooled Thermoelectric Generators for Improved Net Output Power: A Review JF - Energies N2 - Thermoelectric generators (TEGs) have the ability to convert waste heat into electrical energy under unfavorable conditions and are becoming increasingly popular in academia, but have not yet achieved a broad commercial success, due to the still comparably low efficiency. To increase the efficiency and economic viability of TEGs, research is performed on the materials on one hand and on the system connection on the other. In the latter case, the net output power of the cooling system plays a key role. At first glance, passive cooling seems preferable to active cooling because it does not affect the net electrical output power. However, as shown in the present review, the active cooling is to be preferred for net output power. The situation is similar in air and water-cooling. Even though air-cooling is easier to set up, the water-cooling should be preferred to achieve higher net output power. It is shown that microchannel cooling has similar hydraulic performance to conventional cooling and inserts increase the net output power of TEG. As the review reveals that active water-cooling should be the method of choice to achieve high net output power, it also shows that a careful optimization is necessary to exploit the potential. KW - Energy Engineering and Power Technology KW - Renewable Energy, Sustainability and the Environment KW - Electrical and Electronic Engineering KW - Control and Optimization KW - DOAJ Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-37323 SN - 1996-1073 VL - 14 IS - 24 PB - MDPI ER - TY - JOUR A1 - Senthur, N.S. A1 - Anand, C A1 - Ramesh Kumar, M A1 - Elumalai, P.V. A1 - Shajahan, Mohamed Iqbal A1 - Benim, Ali Cemal A1 - Nasr, Emad Abouel A1 - Hussein, H.M.A. A1 - Parthasarathy, M. T1 - Influence of cobalt chromium nanoparticles in homogeneous charge compression ignition engine operated with citronella oil JF - Energy Science & Engineering KW - General Energy KW - Safety, Risk, Reliability and Quality KW - DOAJ Y1 - 2022 U6 - https://doi.org/10.1002/ese3.1088 SN - 2050-0505 VL - 10 IS - 4 SP - 1251 EP - 1263 PB - Wiley ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Canal, Cansu Deniz A1 - Boke, Yakup Erhan T1 - A Validation Study for RANS Based Modelling of Swirling Pulverized Fuel Flames JF - Energies N2 - A swirling pulverized coal flame is computationally investigated. A Eulerian–Lagrangian formulation is used to describe the two-phase flow. Turbulence is modelled within a RANS (Reynolds averaged numerical simulation) framework. Four turbulence viscosity- (TV) based models, namely the standard k-ε model, realizable k-ε model, renormalization group theory k-ε model, and the shear stress transport k-ω model are used. In addition, a Reynolds stress transport model (RSM) is employed. The models are assessed by comparing the predicted velocity fields with the measurements of other authors. In terms of overall average values, the agreement of the predictions to the measurements is observed to be within the range 20–40%. A better performance of the RSM compared to the TV models is observed, with a nearly twice as better overall agreement to the experiments, particularly for the swirl velocity. In the second part of the investigation, the resolution of the discrete particle phase in modelling the turbulent particle dispersion (TPD) and particle size distribution (SD) is investigated. Using the discrete random walk model for the TPD, it is shown that even five random walks are sufficient for an accuracy that is quite high, with a less than 1% mean deviation from the solution obtained by thirty random walks. The approximation of the measured SD is determined by a continuous Rosin–Rammler distribution function, and inaccuracies that can occur in its subsequent discretization are demonstrated and discussed. An investigation on the resolution of the SD by discrete particle size classes (SC) indicates that 12 SC are required for an accuracy with a less than 1% mean deviation from the solution with 18 SC. Although these numbers may not necessarily be claimed to be sufficiently universal, they may serve as guidance, at least for SD with similar characteristics KW - DOAJ Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-37365 SN - 1996-1073 VL - 14 IS - 21 PB - MDPI ER - TY - JOUR A1 - Deniz Canal, Cansu A1 - Boke, Yakup Erhan A1 - Aydin, Ozer A1 - Benim, Ali Cemal T1 - COMPUTATIONAL ANALYSIS OF PULVERIZED COAL CO-FIRING WITH BIOMASS IN 150MWe UNIT OF TUNCBILEK THERMAL POWER PLANT JF - Isi Bilimi ve Teknigi Dergisi - Journal of Thermal Science and Technology Y1 - 2021 U6 - https://doi.org/10.47480/isibted.979314 SN - 1300-3615 VL - 41 IS - 1 SP - 37 EP - 50 PB - Turkish Society for Thermal Sciences & Technology ER - TY - CHAP A1 - Winnitzki, Michael A1 - Spiegel, Thomas A1 - Adam, Mario T1 - Ansätze des maschinellen Lernens für die Prognose des Strombedarfes von Ortsnetzstationen als Beitrag für Steuerungsaufgaben in der Niederspannung. Postersession T2 - Innovationen im Verteilernetz: ETG-CIRED-Workshop 2021 (D-A-CH) 02.-03.11.2021, München KW - Windheizung 2.0 KW - ZIES Y1 - 2021 PB - VDE CY - München ER - TY - GEN T1 - 833 - Zweite Neubekanntmachung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 07.04.2022 N2 - Nachstehend wird der Wortlaut der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 15.02.2016 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 423) neu bekannt gemacht. Die Neubekanntmachung berücksichtigt die Erste Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 07.06.2016 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 456), die Zweite Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 15.11.2018 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 635) sowie die Dritte Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 18.02.2021 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 738). T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 833 KW - Amtliche Mitteilung KW - Prüfungsrecht Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-36768 CY - Düsseldorf ER - TY - CHAP A1 - Gottschald, Joans T1 - Data Driven Model Predictive Control of a District Heating Network T2 - Smart Energy Systems International Conference 2021, 21.09.2021, KW - BestHeatNet Y1 - 2021 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - CHAP A1 - Neumann, Hannah A1 - Adam, Mario A1 - Backes, Klaus A1 - Börner, Martin A1 - Clees, Tanja A1 - Doetsch, Christian A1 - Glaeser, Susanne A1 - Herrmann, Ulf A1 - May, Johanna A1 - Rosenthal, Florian A1 - Sauer, Dirk Uwe A1 - Stadler, Ingo T1 - Development of open educational resources for renewable energy and the energy transition process T2 - ISES SWC 2021: Solar World Congress Virtual Conference, 25.-29. Oktober 2021 KW - OER4EE Y1 - 2021 U6 - https://doi.org/10.18086/swc.2021.47.03 PB - International Solar Energy Society ER - TY - RPRT A1 - Deckert, Carsten A1 - Keszler, Julia A1 - Schmitz, Helen A1 - Mohya, Ahmed T1 - Forecasting Game: Teaching Prospective Engineers Quantitative Forecasting Techniques with a Simulation Game N2 - In order to determine demand as precisely as possible, many businesses use several forecasting methods. The aim of forecasting is to determine future demand based on data from the past. The use of a specific method is not always easy and depends on a number of factors. To help prospective engineers find the most suitable forecasting method for a specific problem, a forecasting game was developed and then evaluated. The paper describes the design and the evaluation of the forecasting game. In order to provide an overview of existing forecasting methods, the first part of the paper examined the mathematical fundamentals of eight different forecasting methods and outlined the requirements for their application. The second part of the paper describes the creation of a forecasting game in which prospective engineers can learn how to determine the appropriate forecasting method for specific scenarios. In total, five scenarios covering the three different demand patterns (linear/stationary, trend and seasonal) as well as the forecast quality methods were developed and can be played through. For each scenario, the player has to choose the most appropriate forecasting method for a specific problem based on a self-created task description. To make the game as realistic as possible, a fictional company with a background story was designed. The last part was about the evaluation of the forecasting game. For the evaluation, a student survey to gather the opinions of the students was conducted. The results of the student survey show an overall positive evaluation of the simulation game by the students. However, the test also showed that the game takes a certain amount of time. Since only 15 of the approximately 30 students who tested the game participated in the evaluation, the results are not significant. T3 - Working Papers in Industrial Engineering - 5 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-39057 SN - 2627-8375 CY - Düsseldorf ER - TY - GEN T1 - 471 - Fachbereichsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf vom 29.08.2016 N2 - Aufgrund der §§ 2 Abs. 4 S. 1, 26 Abs. 3 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) und der Grundordnung der Hochschule Düsseldorf (GO HSD) vom 08.10.2015 hat der Fachbereichsrat des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf die folgende Fachbereichsordnung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 471 KW - Fachbereichsordnung KW - Ordnung KW - MV KW - Maschinenbau und Verfahrenstechnik KW - Amtliche Mitteilungen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9818 CY - Düsseldorf ER - TY - GEN T1 - 456 - Erste Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 07.06.0216 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 456 KW - Satzung KW - Änderung KW - Rahmenprüfungsordnung KW - Maschinenbau und Verfahrenstechnik KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9634 CY - Düsseldorf ER - TY - GEN T1 - 457 - Neubekanntmachung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 07.06.2016 N2 - Nachstehend wird der Wortlaut der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 15.02.2016 (Amtliche Mitteilungen, Verkündungsblatt der Hochschule Düsseldorf Nr. 423) neu bekannt gemacht. Die Neubekanntmachung berücksichtigt die erste Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 07.06.2016 (Amtliche Mitteilungen, Verkündungsblatt der Hochschule Düsseldorf Nr. 456). T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 457 KW - Neubekanntmachung KW - Rahmenprüfungsordnung KW - Maschinenbau und Verfahrenstechnik KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9644 CY - Düsseldorf ER - TY - GEN T1 - 458 - Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang "Mechanical Engineering" an der Hochschule Düsseldorf vom 07.06.2016 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 458 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Master KW - Mechanical Engineering KW - MV KW - Maschinenbau und Verfahrenstechnik KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9654 CY - Düsseldorf ER - TY - GEN T1 - 459 - Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang "Simulations- und Experimentaltechnik" an der Hochschule Düsseldorf vom 07.06.2016 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 459 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Prüfung KW - Amtliche Mitteilungen KW - Master KW - Simulations- und Experimentaltechnik KW - MV KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9665 CY - Düsseldorf ER - TY - GEN T1 - 460 - Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang "Internationales Wirtschaftsingenieurwesen" an der Hochschule Düsseldorf vom 07.06.2016 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 460 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Master KW - Internationales Wirtschaftsingenieurwesen KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9679 CY - Düsseldorf ER - TY - GEN T1 - 508 - Gleichstellungsquoten für die Fachbereiche Architektur, Design, Elektro- und Informationstechnik, Maschinenbau und Verfahrenstechnik, Medien und Wirtschaftswissenschaften der Hochschule Düsseldorf gemäß § 37a HG NRW vom 05.12.2016 N2 - Gemäß § 37a des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat das Präsidium im Einvernehmen mit der jeweiligen Dekanin bzw. dem jeweiligen Dekan die folgenden Gleichstellungsquoten (Gender-Diversity-Faktor; § 3 Berufungsordnung vom 04.10.2016) für die Dauer von drei Jahren ab dem 01.01.2017 festgesetzt: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 508 KW - Gleichstellung KW - W KW - M KW - A KW - D KW - MV KW - Gleichstellungsquoten KW - Amtliche Mitteilungen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10270 CY - Düsseldorf ER - TY - GEN T1 - 511 - Erste Satzung zur Änderung der Prüfungsordnung für die dualen Bachelor-Studiengänge „Produktentwicklung und Produktion dual“ (PPD) und „Prozess-, Energie- und Umwelttechnik dual“ (PEUD) an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 511 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Bachelor KW - Produktentwicklung und Produktion KW - Prozess-, Energie- und Umwelttechnik KW - MV KW - Prüfungsrecht Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10339 CY - Düsseldorf ER - TY - GEN T1 - 512 - Zweite Satzung zur Änderung der Prüfungsordnung für die Bachelor-Studiengänge „Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 512 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Bachelor KW - Produktentwicklung und Produktion KW - Amtliche Mitteilungen KW - Prozess -Energie - und Umwelttechnik KW - MV KW - Prüfungsrecht Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10342 CY - Düsseldorf ER - TY - GEN T1 - 513 - Zweite Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 513 KW - Satzung KW - Änderung KW - Bachelor KW - Wirtschaftsingenieur KW - Maschinenbau KW - Amtliche Mitteilungen KW - MV KW - Prüfungsrecht KW - Prüfungsordnung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10351 CY - Düsseldorf ER - TY - GEN T1 - 514 - Dritte Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 514 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Master KW - Simulation und Experimentaltechnik KW - MV KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10368 CY - Düsseldorf ER - TY - GEN T1 - 515 - Zweite Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 515 KW - Satzung KW - Prüfungsordnung KW - Master KW - Simulation und Experimentaltechnik KW - MV KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10376 CY - Düsseldorf ER - TY - GEN T1 - 516 - Zweite Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 516 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Master KW - Simulation und Experimentaltechnik KW - MV KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10385 CY - Düsseldorf ER - TY - GEN T1 - 556 - Zweite Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Simulations- und Experimentaltechnik“ an der Hochschule Düsseldorf N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 556 KW - Satzung KW - Prüfungsordnung KW - Master KW - Simulations- und Experimentaltechnik KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10898 CY - Düsseldorf ER - TY - RPRT A1 - Adam, Mario A1 - Dreher, Martina A1 - Ebling, Dirk A1 - Knopp, Reinhold A1 - Neef, Matthias A1 - Niess, Robert A1 - Pohl, Tobias A1 - Stahl, Wilhelm A1 - van Rießen, Anne A1 - Waldow, Friederike A1 - Weber, Konradin A1 - Weis, Stephanie T1 - LUST Forschungsprojekt - lebenswerte und umweltgerechte Stadt N2 - LUST (lebenswerte und umweltgerechte Stadt) ist ein interdisziplinäres Projekt der Fachbereiche Architektur, Maschinenbau und Verfahrenstechnik sowie Kultur- und Sozialwissenschaften der Hochschule Düsseldorf. Mittelpunkt des Projektes ist die fachübergreifende Entwicklung neuer Konzepte für eine lebenswerte und umweltgerechte Stadt. Es wurde gefördert vom Land Nordrhein-Westfalen im Rahmen des Programms „FH Struktur“. N2 - LUST (Liveable and environment-friendly Urban SiTe) is an interdisciplinary project of the faculties of Architecture, Mechanical and Process Engineering as well as Social Studies and Cultural Sciences at the University of Applied Sciences Düsseldorf. The four-year (2013 – 2016) project is funded by the Ministry of Innovation, Science and Research of North Rhine–Westphalia. The aim is to develop holistic, new concepts for a liveable and environmentally friendly city in a multidisciplinary manner. KW - Stadtentwicklung KW - lebenswert KW - umweltgerecht KW - substainable urban development KW - environmentally friendly KW - liveable Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11458 SN - 978-3-941334-43-4 CY - Düsseldorf ER -