TY - CHAP A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Ille, Fabian A1 - Wirth, Hans Peter T1 - Bestandsaufnahme von solarthermischen Großanlagen aus den Förderprogrammen Solarthermie-2000 und Solarthermie2000plus T2 - 26. Symposium Thermische Solarenergie 2016, 20.-22.04.2016, Bad Staffelstein KW - ST2000-LangEff Y1 - 2016 UR - http://docplayer.org/78153296-Bestandsaufnahme-von-solarthermischen-grossanlagen-aus-den-foerderprogrammen-solarthermie-2000-und-solarthermie2000plus.html CY - Bad Staffelstein ER - TY - CHAP A1 - Adam, Mario A1 - Walter, D. A1 - Backes, Klaus A1 - Steinweg, Jan T1 - Classification of Hydraulic Designs and Hardware-in-the-loop-Tests of Solar Assisted Heating Systems for Multi-Family Houses T2 - 2016 International Energy and Sustainability Conference (IESC), 30.06.-1.07.2016, Cologne KW - SUW-MFH Y1 - 2016 UR - https://doi.org/10.1109/IESC.2016.7569494 U6 - https://doi.org/10.1109/IESC.2016.7569494 SP - 1 EP - 6 PB - IEEE CY - Köln ER - TY - JOUR A1 - Weide, Philipp A1 - Schulz, Katharina A1 - Kaluza, Stefan A1 - Rohe, Markus A1 - Beranek, Radim A1 - Muhler, Martin T1 - Controlling the Photocorrosion of Zinc Sulfide Nanoparticles in Water by Doping with Chloride and Cobalt Ions JF - Langmuir Y1 - 2016 UR - http://www.ncbi.nlm.nih.gov/pubmed/27934521 U6 - https://doi.org/10.1021/acs.langmuir.6b03385 SN - 1520-5827 VL - 32 IS - 48 SP - 12641 EP - 12649 PB - ACS Publ. ER - TY - CHAP A1 - Backes, Klaus A1 - Ille, Fabian A1 - Adam, Mario T1 - Klassifizierung und Laborfeldtests solar unterstützter Wärmezentralen in Mehrfamilienhäusern. Posterpräsentation T2 - 26. Symposium Thermische Solarenergie 2016, 20.-22.04.2016, Bad Staffelstein KW - SUW-MFH Y1 - 2016 ER - TY - CHAP A1 - Goebel, Johannes A1 - Frank, Lena A1 - Adam, Mario T1 - Heizen und Kühlen mittels Abwasser-Gaswärmepumpen/-Kältemaschinen T2 - Deutsche Kälte- und Klimatagung 2015, 18.-20.11.2015, Dresden KW - Abwasser-Gas-WP/KM Y1 - 2016 SN - 978-1-5108-1998-6 N1 - Inhaltsverzeichnis: https://www.proceedings.com/content/029/029687webtoc.pdf SP - 1190 EP - 1202 ER - TY - CHAP A1 - Helbig, Sonja A1 - Steinweg, Jan A1 - Eggert, Daniel A1 - Adam, Mario ED - Martinez, Victor ED - Gonzales, Jose T1 - Performance Testing and Optimization of Solar Assisted Heating Systems for Multi Family Houses T2 - EuroSun 2016 - Proceedings 11th ISES EuroSun Conference, 11. -14.10.2016, Palma (Mallorca), Spain KW - SUW-MFH Y1 - 2016 SN - 978-3-9814659-6-9 U6 - https://doi.org/10.18086/eurosun.2016.04.13 SP - 1 EP - 10 ER - TY - CHAP A1 - Schramm, Sebastian A1 - Adam, Mario T1 - Speichereinbindung mit dynamischem Beladebereich im Vergleich zu anderen Speicherladekonzepten. Poster-Präsentation T2 - Gleisdorf SOLAR - 12. Internationale Konferenz für solares Heizen und Kühlen, 08.-10.06.2016, Gleisdorf/Austria KW - Solare-Prozesswärme-Standards Y1 - 2016 UR - https://www.aee-intec.at/0uploads/dateien1152.pdf SP - 433 EP - 441 ER - TY - CHAP A1 - Steinweg, Jan A1 - Eggert, Daniel A1 - Rockendorf, G. A1 - Backes, Klaus A1 - Adam, Mario ED - Ostbayerisches Technologie-Transfer-Institut e.V., T1 - Leistungsbewertung und Optimierung von solar unterstützten Wärmezentralen in Mehrfamilienhäusern. Posterpräsentation T2 - 26. Symposium Thermische Solarenergie 2016, 20.-22.04.2016, Bad Staffelstein KW - SUW-MFH Y1 - 2016 CY - Bad Staffelstein ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Gül, Fethi A1 - Assmann, Alexander A1 - Akhyari, Payam A1 - Lichtenberg, Artur A1 - Joos, Franz T1 - Validation of loss-coefficient-based outlet boundary conditions for simulating aortic flow JF - Journal of Mechanics in Medicine and Biology Y1 - 2016 U6 - https://doi.org/10.1142/s0219519416500111 VL - 16 IS - 2 PB - World Scientific ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Iqbal, Sohail A1 - Joos, Franz A1 - Wiedermann, Alexander T1 - Numerical Analysis of Turbulent Combustion in a Model Swirl Gas Turbine Combustor JF - Journal of Combustion Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-28044 SN - 2090-1968 SN - 2090-1976 VL - 2016 SP - 1 EP - 12 PB - Hindawi ER - TY - JOUR A1 - Fomin, A. A1 - Dvornikov, L. A1 - Paramonov, M. A1 - Jahr, Andreas T1 - To the theory of mechanisms subfamilies JF - IOP Conference Series: Materials Science and Engineering Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-28062 VL - 124 PB - IOP Publishing ER - TY - JOUR A1 - Iqbal, Sohail A1 - Benim, Ali Cemal A1 - Fischer, S. A1 - Joos, F. A1 - Kluβ, D. A1 - Wiedermann, Alexander T1 - Experimental and numerical analysis of natural bio and syngas swirl flames in a model gas turbine combustor JF - Journal of Thermal Science Y1 - 2016 U6 - https://doi.org/10.1007/s11630-016-0885-4 VL - 25 IS - 5 SP - 460 EP - 469 PB - Springer ER - TY - JOUR A1 - Prata, A. J. A1 - Dezitter, F. A1 - Davies, I. A1 - Weber, Konradin A1 - Birnfeld, M. A1 - Moriano, D. A1 - Bernardo, C. A1 - Vogel, A. A1 - Prata, G. S. A1 - Mather, T. A. A1 - Thomas, H. E. A1 - Cammas, J. A1 - Weber, M. T1 - Artificial cloud test confirms volcanic ash detection using infrared spectral imaging JF - Scientific reports N2 - Airborne volcanic ash particles are a known hazard to aviation. Currently, there are no means available to detect ash in flight as the particles are too fine (radii < 30 μm) for on-board radar detection and, even in good visibility, ash clouds are difficult or impossible to detect by eye. The economic cost and societal impact of the April/May 2010 Icelandic eruption of Eyjafjallajökull generated renewed interest in finding ways to identify airborne volcanic ash in order to keep airspace open and avoid aircraft groundings. We have designed and built a bi-spectral, fast-sampling, uncooled infrared camera device (AVOID) to examine its ability to detect volcanic ash from commercial jet aircraft at distances of more than 50 km ahead. Here we report results of an experiment conducted over the Atlantic Ocean, off the coast of France, confirming the ability of the device to detect and quantify volcanic ash in an artificial ash cloud created by dispersal of volcanic ash from a second aircraft. A third aircraft was used to measure the ash in situ using optical particle counters. The cloud was composed of very fine ash (mean radii ~10 μm) collected from Iceland immediately after the Eyjafjallajökull eruption and had a vertical thickness of ~200 m, a width of ~2 km and length of between 2 and 12 km. Concentrations of ~200 μg m(-3) were identified by AVOID at distances from ~20 km to ~70 km. For the first time, airborne remote detection of volcanic ash has been successfully demonstrated from a long-range flight test aircraft. KW - Luftreinhaltung Y1 - 2016 U6 - https://doi.org/10.1038/srep25620 VL - 6 PB - Springer Nature ER - TY - JOUR A1 - Ebling, Dirk A1 - Krumm, A. A1 - Pfeiffelmann, Björn A1 - Gottschald, J. A1 - Bruchmann, J. A1 - Benim, Ali Cemal A1 - Adam, Mario A1 - Labs, R. A1 - Herbertz, R. R. A1 - Stunz, A. T1 - Development of a System for Thermoelectric Heat Recovery from Stationary Industrial Processes JF - Journal of Electronic Materials KW - heat recovery KW - Thermoelectric generation KW - thermoelectric generation system KW - waste heat KW - EnerTEG Y1 - 2016 U6 - https://doi.org/10.1007/s11664-016-4511-8 N1 - The authors acknowledge financial support from the Ministry of Economic Affairs and Energy of the State of North Rhine-Westphalia, Germany and the European Commission from the European Regional Development Fund. VL - 45 IS - 7 SP - 3433 EP - 3439 PB - Springer ER - TY - JOUR A1 - Roedder, Maximilian A1 - Neef, Matthias A1 - Laux, Christoph A1 - Priebe, Klaus-P. T1 - Systematic Fluid Selection for Organic Rankine Cycles and Performance Analysis for a Combined High and Low Temperature Cycle JF - Journal of Engineering for Gas Turbines and Power N2 - The organic Rankine cycle (ORC) is an established thermodynamic process that converts waste heat to electric energy. Due to the wide range of organic working fluids available the fluid selection adds an additional degree-of-freedom to the early design phase of an ORC process. Despite thermodynamic aspects such as the temperature level of the heat source, other technical, economic, and safety aspects have to be considered. For the fluid selection process in this paper, 22 criteria were identified in six main categories while distinguishing between elimination (EC) and tolerance criteria (TC). For an ORC design, the suggested method follows a practical engineering approach and can be used as a structured way to limit the number of interesting working fluids before starting a detailed performance analysis of the most promising candidates. For the first time, the selection process is applied to a two-stage reference cycle, which uses the waste heat of a large reciprocating engine for cogeneration power plants. It consists of a high temperature (HT) and a low temperature (LT) cycle in which the condensation heat of the HT cycle provides the heat input of the LT cycle. After the fluid selection process, the detailed thermodynamic cycle design is carried out with a thermodynamic design tool that also includes a database for organic working fluids. The investigated ORC cycle shows a net thermal efficiency of about 17.4% in the HT cycle with toluene as the working fluid and 6.2% in LT cycle with isobutane as the working fluid. The electric efficiency of the cogeneration plant increases from 40.4% to 46.97% with the both stages of the two-stage ORC in operation. KW - Gas Turbines KW - Cycle Innovations KW - Energy KW - Power systems KW - Fluids Y1 - 2016 U6 - https://doi.org/10.1115/1.4031361 VL - 138 IS - 031701 EP - 3 PB - ASME ER - TY - JOUR A1 - Wolter, Nina A1 - Zekorn, Thomas A1 - Neef, Matthias T1 - Stationäre thermodynamische Prozesssimulationen am Beispiel eines Industriekraftwerks JF - BWK: das Energie-Fachmagazin N2 - Um bauliche Veränderungen in bestehenden Kraftwerksprozessen auf ihre Wirkungsweise untersuchen und thermodynamisch beziehungsweise wirtschaftlich bewerten zu können, werden thermische Kraftwerksprozesse mit geeigneter Simulationssoftware abgebildet und in verschiedenen Detaillierungsstufen ausgelegt oder nachgerechnet. Im Folgenden wird ein Weg aufgezeigt, wie mit Hilfe einer stationären Simulationssoftware die Gesamtjahresbilanz eines Kraftwerks vorausberechnet werden kann. Mit Hilfe von Prozessdaten aus Vorjahren wird nachgewiesen, dass das Berechnungsmodell das bestehende Kraftwerk mit einer Abweichung von weniger als drei Prozent bezüglich erzeugter elektrischer Leistung und Brennstoffeinsatz und bei bekannter Dampfproduktion abbilden kann. Das so verifizierte Modell kann zur Untersuchung von Zubaumaßnahmen oder Veränderungen im Kraftwerksprozess eingesetzt werden. KW - Energiebilanz KW - Kraftwerk Y1 - 2016 VL - 68 IS - 6 SP - 6 EP - 10 ER - TY - RPRT A1 - Neef, Matthias A1 - Laux, Christoph T1 - Optimierung des elektrischen Nutzungsgrades eines Blockheizkraftwerks durch Abwärmeverwertung in einem nachgeschalteten Dampfkraftprozess N2 - Abschlussbericht Förderung: Bundesministerium für Bildung und Forschung (BMBF) Förderkennzeichen: 03FH006I2 Projektzeitraum: 31.08.2012 -31.08.2015 Y1 - 2016 U6 - https://doi.org/10.2314/GBV:867675985 CY - Düsseldorf ER - TY - CHAP A1 - Friedrich, Linus A1 - Lyssakow, Pawel A1 - Pearce, Garth A1 - Ruess, Martin A1 - Bisagni, Chiara A1 - Schröder, Kai-Uwe ED - Papadrakakis, Manolis ED - Papadopoulos, V. ED - Stefanou, G. ED - Plevris, V. T1 - ON THE STRUCTURAL DESIGN OF IMPERFECTION SENSITIVE LAMINATED COMPOSITE SHELL STRUCTURES SUBJECTED TO AXIAL COMPRESSION T2 - Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), 05.06.2016 - 10.06.2016, Crete Island KW - composite shells KW - imperfection sensitivity KW - Shell buckling Y1 - 2016 UR - http://www.eccomasproceedia.org/conferences/eccomas-congresses/eccomas-congress-2016 SN - 978-618-82844-0-1 U6 - https://doi.org/10.7712/100016.1951.5838 SP - 2182 EP - 2189 PB - Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA) Greece CY - Athens ER - TY - CHAP A1 - Friedrich, Linus A1 - Ruess, Martin A1 - Schröder, Kai-Uwe T1 - Efficient and robust shell design of space launcher vehicle structures T2 - 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, San Diego, 4-8 January 2016 Y1 - 2016 UR - https://arc.aiaa.org/doi/book/10.2514/MSDM16 SN - 978-1-62410-392-6 U6 - https://doi.org/10.2514/6.2016-1973 SP - 1 EP - 18 PB - American Institute of Aeronautics and Astronautics CY - Reston ER - TY - JOUR A1 - Liang, Ke A1 - Ruess, Martin T1 - Nonlinear buckling analysis of the conical and cylindrical shells using the SGL strain based reduced order model and the PHC method JF - Aerospace Science and Technology Y1 - 2016 U6 - https://doi.org/10.1016/j.ast.2016.05.018 SN - 1270-9638 VL - 55 SP - 103 EP - 110 PB - Elsevier ER - TY - JOUR A1 - Liang, Ke A1 - Ruess, Martin A1 - Abdalla, Mostafa T1 - An eigenanalysis-based bifurcation indicator proposed in the framework of a reduced-order modeling technique for non-linear structural analysis JF - International Journal of Non-Linear Mechanics Y1 - 2016 U6 - https://doi.org/10.1016/j.ijnonlinmec.2016.01.013 SN - 0020-7462 VL - 81 SP - 129 EP - 138 PB - Elsevier ER -