TY - CHAP A1 - Spiegel, Thomas A1 - Adam, Mario T1 - Lastflexibilität in Wohngebäuden für reale Stromnetze mit Transportbeschränkungen T2 - 10. Fachtagung Smart Energy and Systems, 04.-05.11.2019, Dortmund KW - Windheizung 2.0 Y1 - 2019 N1 - nur Vortrag, keine Veröffentlichung im Tagungsband CY - Dortmund ER - TY - JOUR A1 - Deckert, Carsten A1 - Schomaker, Rahel M. T1 - Kultur und Innovation – Wie sich kulturelle Faktoren auf die nationale Innovationsfähigkeit auswirken JF - Der Betriebswirt KW - Innovation Y1 - 2019 U6 - https://doi.org/10.3790/dbw.60.2.18 SN - 2628-7846 VL - 60 IS - 2 SP - 18 EP - 23 PB - Duncker & Humblot ER - TY - JOUR A1 - Frank, Lena A1 - Rödder, Maximilian A1 - Neef, Matthias A1 - Adam, Mario T1 - Heating, Ventilation, Domestic Appliances – an Energy Integrated System Concept for the Household of the Future JF - Energy Y1 - 2021 U6 - https://doi.org/10.1016/j.energy.2021.121303 SN - 0360-5442 VL - 234 PB - Elsevier ER - TY - CHAP A1 - Lohmann, Sandra A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Ille, Fabian A1 - Lambach, Stefan T1 - Jahres-Energieeffizienz Von Kühlgeräten Zur Klimatisierung - Normberechnung Und Simulation T2 - Deutsche Kaelte-und Klimatagung 2016, 16 - 18 November 2016, Kassel Kassel KW - Coolplan Y1 - 2017 SN - 978-1-5108-3656-3 N1 - Inhaltsverzeichnis: proceedings.com/content/033/033625webtoc.pdf SP - 1125 EP - 1376 PB - Deutscher Kalte- und Klimatechnisher Verein (DKV) CY - Hannover ER - TY - JOUR A1 - Deckert, Carsten A1 - Mohya, Ahmed T1 - Kreativitätstechniken für angehende Ingenieurinnen und Ingenieure JF - Innovations-Forum N2 - In Zeiten fortschreitender Digitalisierung und zunehmender Transparenz auf den Märkten müssen sich Unternehmen mit zunehmenden Veränderungen, z. B. durch Prozess- und Produktinnovationen, auseinandersetzen. Es ist daher unerlässlich, dass sich angehende Ingenieurinnen und Ingenieure mit dem Prozess der Ideenfindung und der damit verbundenen Innovationsbereitschaft auseinandersetzen. Kreativität spielt eine entscheidende Rolle im Prozess der Ideengenerierung und Problemlösung. Hochschulen, die Ingenieurstudiengänge anbieten, sind daher gefordert, die entsprechenden Fähigkeiten zu vermitteln. Durch den gezielten Einsatz von Kreativitätstechniken kann die Kreativität gefördert werden. Der vorliegende Beitrag befasst sich mit der Bewertung unterschiedlicher Kreativitätstechniken und geht der Frage nach, welche Kreativitätstechniken sich eignen, den angehenden Ingenieurinnen und Ingenieuren beim kreativen Problemlösen zu unterstützen. KW - Kreativität KW - Innovation Y1 - 2020 VL - 18 IS - 1 SP - 42 EP - 46 PB - InnoFo ER - TY - CHAP A1 - Rödder, Maximilian A1 - Neef, Matthias A1 - Laux, Christoph A1 - Priebe, Klaus-P. T1 - Systematic Fluid Selection for Organic Rankine Cycles (ORC) and Performance Analysis for a Combined High and Low Temperature Cycle T2 - Volume 3: Coal, Biomass and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration N2 - The organic Rankine cycle (ORC) is an established thermodynamic process that converts waste heat to electric energy. Due to the wide range of organic working fluids available the fluid selection adds an additional degree of freedom to the early design phase of an ORC process. Despite thermodynamic aspects such as the temperature level of the heat source, other technical, economic and safety aspects have to be considered. For the fluid selection process in this paper, 22 criteria were identified in six main categories while distinguishing between elimination and tolerance criteria. For an ORC design, the suggested method follows a practical engineering approach and can be used as a structured way to limit the number of interesting working fluids before starting a detailed performance analysis of the most promising candidates. For the first time the selection process is applied to a two-stage reference cycle which uses the waste heat of a large reciprocating engine for cogeneration power plants. It consists of a high temperature and a low temperature cycle in which the condensation heat of the high temperature (HT) cycle provides the heat input of the low temperature (LT) cycle. After the fluid selection process the detailed thermodynamic cycle design is carried out with a thermodynamic design tool that also includes a database for organic working fluids. The investigated ORC cycle shows a net thermal efficiency of about 17,4% in the high temperature cycle with Toluene as the working fluid and 6,2% in low temperature cycle with iso-Butane as the working fluid. The electric efficiency of the cogeneration plant increases from 40,4% to 46,97% with the both stages of the two-stage ORC in operation. Y1 - 2015 UR - https://asmedigitalcollection.asme.org/GT/proceedings/GT2015/56673/Montreal, Quebec, Canada/236733 SN - 978-0-7918-5667-3 U6 - https://doi.org/10.1115/GT2015-42432 PB - American Society of Mechanical Engineers ER - TY - CHAP A1 - Helm, Peter A1 - Spliethoff, Hartmut A1 - Neef, Matthias T1 - Closing the Gap: Measuring Bristle Blow Down of Brush Seals T2 - 19 th International Conference on Fluid Sealing, Poitiers Y1 - 2007 CY - Poitiers ER - TY - CHAP A1 - Neef, Matthias A1 - Hepermann, Florian A1 - Sürken, Norbert A1 - Schettel, Joachim T1 - Brush Seal Porosity Modeling: Applicability and Limitations T2 - ETC7 – 7th Conference on Turbomachinery, Athens Y1 - 2007 CY - Athens ER - TY - CHAP A1 - Neef, Matthias A1 - Hummel, Dietrich T1 - Euler solutions for a finite-span flapping wing T2 - "Fixed, flapping and rotary wing vehicles at very low Reynolds numbers, Notre Dame, Indiana, USA Y1 - 2000 ER - TY - JOUR A1 - Deckert, Carsten T1 - Spannungsfelder der Teamkreativität: Wie Teamklima und -kontext zur Kreativität beitragen JF - Ideen und Innovationsmanagement N2 - Dieser Beitrag untersucht die Spannungsfelder der Teamkreativität. Die Spannungsfelder basieren auf einer grundlegenden Spannung aus Originalität und Effektivität, die der Standarddefinition der Kreativität zugrunde liegt. Es lassen sich auf Basis des Teamklimas und -kontextes Spannungsfelder hinsichtlich Konformität, Konsens und Kohäsion identifizieren. Mit Bezug zur Konformität müssen Teams ein positives Spannungsfeld aus der Unterstützung für Innovation und Aufgabenorientierung erreichen, um gleichzeitig Experimentierfreude zu fördern und hohe Qualitätsansprüche zu erzielen. Konsens entsteht im Spannungsfeld aus konstruktivem Konflikt und partizipatorischer Entscheidungsfindung. Bei der Kohäsion besteht eine Spannung zwischen der Teamidentität (Geborgenheit) und den individuellen Identitäten der Teammitglieder (Diversität). Der Beitrag beschreibt, wie diese drei Spannungsfelder zusammenarbeiten, wenn außergewöhnliche Kreativität in Teams entsteht. KW - Teamwork KW - Teamkreativität Y1 - 2019 SN - 2198-3143 IS - 4 SP - 116 EP - 120 ER - TY - THES A1 - Biedermann, Till M. T1 - Aeroacoustic transfer of leading edge serrations from single aerofoils to low-pressure fan applications T1 - Strömungsakustischer Transfer von Leading Edge Serrations an einzelnen Tragflügeln hin zu Niederdruck-Axialventilatoren N2 - Leading edge serrations are well-known for their aeroacoustic potential in reducing aerofoil-turbulence interaction noise and are also associated with certain aerodynamic advantages. To prepare leading edge serrations for industrial application, two obstacles remain to be addressed. First is a combined analysis of the aeroacoustic and the aerodynamic performance of leading edge serrations to develop optimum designs. Second is the need to examine the transferability of the known effects of leading edge serrations from a single aerofoil to full rotors, which are considered to be the final area of application. This thesis aims to assist in the transfer of a well-investigated aerofoil with serrated leading edges from the rigid to the rotating domain. With this purpose, a single aerofoil type is selected and thoroughly analysed, experimentally and numerically, to generate a reliable data basis for aerodynamic performance and noise reduction capability. Aside from gathering information on the overall performance, the spatial distribution of the noise sources is localised, and the spectral composition of the noise reduction is found to follow a clearly defined scaling law. Aerodynamically, generated vortices are found to be responsible for a complex three-dimensional separation mechanism of the leading edge serrations, causing a delay of stall. The generated data basis is then used to design low-pressure axial fans of minimum complexity by keeping the initially chosen aerofoil type. The experimentally identified noise reduction mechanisms for the serrated axial fans are found to be more diverse than the single aerofoil and highly dependent on the inflow conditions and the operation point of the fan. A highly similar pattern for the spectral scaling of the noise reduction supports the finding that at optimum operation conditions, the previously identified noise reduction mechanisms for the single aerofoils are transferable to the rotating domain. On the other hand, additional aerodynamic mechanisms are found to dominate the noise reduction for the instability region of the fan, also contributing to reduced blade-to-blade interaction effects. Moreover, the blade-tip leakage flow is altered by delaying the development of coherent structures. The next step towards a more general description of the aeroacoustic and aerodynamic dependencies is developing a comprehensive model based on artificial neural networks. This model allows a combined analysis of the aerodynamic and acoustic performance of rotors with serrated leading edges and shows an accurate prediction of the overall performance and the spectral composition of the radiated noise. It also enables the development of multi-objective optima for serration designs and motivates further studies into the generalisability of the observed trends. Furthermore, the developed model represents a feasible tool to create tailored serration designs for maximum efficiency in both aeroacoustics and aerodynamics, contributing to the development of future low-noise fans and rotating machinery. N2 - Leading Edge Serrations sind hinlänglich für ihr Potential zur Reduktion von turbulenzinduziertem Schall bekannt. Ebenso können sie sich als aerodynamisch vorteilhaft erweisen. Mit dem Ziel, Leading Edge Serrations industriellen Anwendungen zugänglich zu machen, verbleiben primär noch zwei Hemmnisse. Zum einen die Notwendigkeit einer kombinierten Bewertung des aerodynamischen und des aeroakustischen Potentials mit dem Ziel der Identifikation optimaler Designansätze. Zum anderen sind Aussagen hinsichtlich der Übertragbarkeit der bekannten Schallreduktionsmechanismen von einem einzelnen Tragflügel hin zu rotierenden Strömungsmaschinen zu treffen, da letztere das finale Anwendungsgebiet von Leading Edge Serrations darstellen. Diese Arbeit zielt darauf ab, bei dem Transfer eines umfassend analysierten Tragflügeldesigns mit Leading Edge Serrations hin zu einem rotierenden System zu assistieren. Hierzu wird ein für spätere rotierende Anwendungen sinnvolles Tragflügelprofil gewählt und sowohl experimentell als auch numerisch umfassend untersucht, um eine Datenbasis des aerodynamischen und aeroakustischen Potentials zu generieren. Neben Informationen über die globalen Eigenschaften, wurde ebenfalls die räumliche Lage der Schallquellen lokalisiert. Zudem konnte der Verlauf des spektralen Schallreduktionsvermögens einer klaren Gesetzmäßigkeit zugeordnet werden. In Bezug auf die Aerodynamik wurden Wirbelstrukturen, welche sich an den Leading Edge Serrations bilden, als ursächlich für einen komplexen dreidimensionalen Ablösemechanismus identifiziert, welcher eine verzögerte Strömungsablösung bewirkt. Unter Beibehaltung des gewählten Tragflügelprofils wurde die generierte Datenbasis in einem zweiten Schritt zur Auslegung von axialen Niederdruckventilatoren niedriger Komplexität genutzt. Die hier experimentell identifizieren Schallreduktionsmechanismen sind, im Vergleich zu einem einzelnen Tragflügel, deutlich diverser und weisen eine klare Abhängigkeit vom Betriebspunkt des Ventilators sowie von den Einflussparametern auf. Unter optimalen Zuströmbedingungen kann eine klare Übertragbarkeit der Effekte vom ebenen in das rotierende System gezeigt werden. Im Gegensatz wird das Schallreduktionspotential im Instabilitätsbereich des Ventilators durch aerodynamische Strömungsphänomene dominiert, welche zudem zu einer vorteilhaften Beeinflussung von Schaufelinteraktionen beitragen. Des Weiteren wurde durch den Einsatz von Rotoren mit Leading Edge Serrations eine verzögerte Entstehung von kohärenten Strukturen im Blattspitzenbereich nachgewiesen. Um einen weiteren Schritt in Richtung einer globalen Beschreibung der erhaltenen aeroakustischen und aerodynamischen Abhängigkeiten zu gehen, wurde ein umfassendes Modell generiert, welches auf dem Training künstlicher neuronaler Netze beruht. Das generierte Modell ermöglicht eine kombinierte Prognose der aerodynamischen und aeroakustischen Performance der getesteten Prototypen und weist sowohl im Zeitbereich als auch hinsichtlich der spektralen Zusammensetzung der Signale eine hohe Prognosegüte auf. Dies ermöglicht die Definition multikriterieller Optima bezüglich des Serration Designs und motiviert weiterführende Studien hinsichtlich einer Generalisierbarkeit der beobachteten Trends. Schlussendlich ermöglicht das generierte Modell maßgeschneiderte Designansätze für eine maximale aerodynamische und aeroakustische Effizienz, was einen sinnvollen Beitrag zur zukünftigen Entwicklungen schallarmer Ventilatoren und Strömungsmaschinen darstellt. KW - aeroacoustics KW - aerodynamics KW - low-pressure axial fan KW - leading edge serrations KW - artificial neural networks KW - künstliche neuronale Netze KW - Vorderkantenzacken KW - Niederdruck-Axialventilatoren KW - Aerodynamik KW - Strömungsakustik Y1 - 2019 U6 - https://doi.org/10.14279/depositonce-9075 PB - Technische Universität Berlin CY - Berlin ER - TY - JOUR A1 - Baier, André A1 - Neef, Matthias T1 - Studierende lehren und lernen sozial-ökologische Verantwortung JF - Die Neue Hochschule KW - Verantwortung Y1 - 2019 VL - 60 IS - 5 SP - 8 EP - 11 ER - TY - THES A1 - Neef, Matthias T1 - Analyse des Schlagfluges durch numerische Strömungsberechnung N2 - Mit Hilfe eines Finite-Volumen-Verfahrens wird die dreidimensionale reibungsbehaftete Stroemung um einen schlagenden Fluegel berechnet. Die Bewegungsparamter sind dabei vergleichbar mit den Bedingungen im Reiseflug grosser Voegel. Das numerische Verfahren wird fuer den gezeigten Anwendungsfall, indem eine Methode zur Realisierung von beliebigen periodischen Bewegungen implemetiert wird. Eine Verifizierung erfolgt durch den Vergleich mit analytischen, numerischen und experimentellen Ergebnissen aus der Literatur. Mit dem verifizierten Verfahren werden die instationaeren Groessen wie Druck und Geschwindigkeiten in der Umgebung des bewegten Fluegels berechnet. Daraus ergeben sich ferner die zeitlich gemittelten Groessen wie Schub und Wirkungsgrad des Schlagfluges. Ausserdem wird die Interaktion von Laengs- und Querwirbeln im Nachlauf des schlagenden Fluegels untersucht. Es zeigt sich ein dominanter Einfluss der pulsierenden Randwirbel aufgrund der endlichen Spannweite, waehrend die Anfahr- und Stoppwirbel, verursacht durch die Fluegelbewegung, im Reiseflug grosser Voegel nahezu vernachlaessigbar erscheinen. N2 - The three-dimensional viscous flow around a flapping wing is calculated by means of a finite volume code. The invoked motion parameters are comparable with the conditions in cruising flight of large birds. For the described application the numerical procedure is extended by implementing a method for realisation of arbitrary periodic motions. The verification is obtained by comparison with analytical, numerical and experimental results from existing literature. With the verified method the instationary quantities such as pressure and velocity are known in the vicinity of the wing. This also yields the time averaged values such as thrust and propulsive efficiency of the flapping wing propulsion. Additionally, the interaction between longitudinal and transverse vortices in the wake of the flapping wing is investigated. A dominant influence of the oscillating tip vortices due to the finite span can be seen, while the starting and stopping vortices due to the wing motion appear almost negligible in the cruising flight of large birds. Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:084-14501 UR - http://www.digibib.tu-bs.de/?docid=00001361 VL - ZLR-Forschungsbericht, 2 ER - TY - CHAP A1 - Neef, Matthias A1 - Fussenecker, Claudia A1 - Niemann, Jörg A1 - Zielke, Thomas ED - Clark, Robin ED - Munkebo Hussmann, Peter ED - Järvinen, Hannu-Matti T1 - Publish your undergraduate research! A mandatory course for master students in engineering T2 - Creativity, innovation and entrepreneurship for engineering education excellence : proceedings of the 46th SEFI Annual Conference 2018, Copenhagen, Denmark N2 - Undergraduate students in engineering often have little exposure to the world of scientific publishing and the culture of sharing research work. While the beneficial exchange between research and teaching is well promoted, while the benefits of conference participation for students have already been surveyed and while courses on scientific writing are readily available, the concept of mini-conferences as part of the curriculum combines all three aspects into one. Therefore, the course "Engineering Conferences" was developed and installed as a mandatory part of a master program for engineering students. The idea is to go beyond simply teaching the standards of academic writing and skills for using scientific publications. By using a learner-centered approach, the students are engaged in typical activities around an active attendance of a real conference. Based on their bachelor thesis, they write a paper complying with common academic standards, submit the paper and review submissions of their fellow students. They also produce a poster and defend their work in a poster session held publicly on campus. This contribution is based on the experience from the first four terms teaching the course. It explains the didactic rationale behind the concept and individual teaching modules, it comprises the collection of useful resources for teaching and organizing scientific publishing and it includes the consequences drawn from course evaluation results. Y1 - 2018 SN - 978-2-87352-016-8 PB - SEFI - Société Européenne pour la Formation des Ingénieurs CY - Brussels ER - TY - JOUR A1 - Dubberke, Frithjof H. A1 - Linnemann, Matthias A1 - Abbas, Wameedh Khider A1 - Baumhögger, Elmar A1 - Priebe, Klaus-Peter A1 - Roedder, Maximilian A1 - Neef, Matthias A1 - Vrabec, Jadran T1 - Experimental setup of a cascaded two-stage organic Rankine cycle JF - Applied Thermal Engineering N2 - In combination with a bottoming cycle, operated with a pure fluid in transcritical mode, the usage of a zeotropic mixture as a working fluid appears to be exergetically favorable for power cycle efficiency in cascaded two-stage organic Rankine cycles (CORC). A CORC is set up and initially tested with cyclopentane and propane as working fluids in its high temperature and low temperature cycle, respectively. A thermal oil cycle serves as the heat source and is powered electrically with a maximum heat flow of 158 kW. The design of this experimental setup allows for a rapid replacement of individual components and for a wide range of conditions in terms of fluids and thermodynamic states. The components of all cycles and the measurement and control technology are described in detail. A testing procedure is presented, followed by a discussion of the measurement results, where it is shown that the intended concept of two cascaded organic Rankine cycles is operational and that the measured data are consistent. KW - organic Rankine cycle KW - cascade KW - multicomponent working fluid KW - temperature-glide KW - pinch point KW - exergetice efficiency Y1 - 2018 U6 - https://doi.org/10.1016/j.applthermaleng.2017.11.137 VL - 131 SP - 958 EP - 964 PB - Elsevier ER - TY - JOUR A1 - Feseker, Daniel A1 - Kinell, Mats A1 - Neef, Matthias T1 - Experimental Study on Pressure Losses in Circular Orifices With Inlet Cross Flow JF - Journal of Turbomachinery N2 - The ability to understand and predict the pressure losses of orifices is important in order to improve the air flow within the secondary air system. This experimental study investigates the behavior of the discharge coefficient for circular orifices with inlet cross flow which is a common flow case in gas turbines. Examples of this are at the inlet of a film cooling hole or the feeding of air to a blade through an orifice in a rotor disk. Measurements were conducted for a total number of 38 orifices, covering a wide range of length-to-diameter ratios, including short and long orifices with varying inlet geometries. Up to five different chamfer-to-diameter and radius-to-diameter ratios were tested per orifice length. Furthermore, the static pressure ratio across the orifice was varied between 1.05 and 1.6 for all examined orifices. The results of this comprehensive investigation demonstrate the beneficial influence of rounded inlet geometries and the ability to decrease pressure losses, which is especially true for higher cross flow ratios where the reduction of the pressure loss in comparison to sharp-edged holes can be as high as 54%. With some exceptions, the chamfered orifices show a similar behavior as the rounded ones but with generally lower discharge coefficients. Nevertheless, a chamfered inlet yields lower pressure losses than a sharp-edged inlet. The obtained experimental data were used to develop two correlations for the discharge coefficient as a function of geometrical as well as flow properties. KW - Compressor KW - Gas turbine engines KW - Turbine components KW - Boundary layer development KW - Fluid dynamics KW - Heat transfer KW - Measurement techniques KW - Film cooling KW - Heat transfer phenomena Y1 - 2018 U6 - https://doi.org/10.1115/1.4039842 VL - 140 IS - 7 CY - ASME ER - TY - GEN A1 - Frank, Lena A1 - Rödder, Maximilian A1 - Neef, Matthias A1 - Adam, Mario T1 - Heizung, Lüftung, Weiße Ware - Ein integriertes Systemkonzept für das Haus der Zukunft T2 - KI Kälte Luft Klimatechnik N2 - In energieeffizienten Gebäuden spielt der Bedarf an Energie für die Raumheizung gegenüber der benötigten Energie für Warmwasser und zum Antrieb elektrischer Geräte eine zusehends untergeordnete Rolle. Die thermische Energie für elektrische Haushalts­geräte, wie Waschmaschine, Kühlschrank etc., wird für gewöhnlich dezentral im Gerät erzeugt. Vor diesem Hintergrund ist das Ziel eines Forschungsprojekts der Bau und der Test eines Funktionsmusters zur funktionalen und energetischen Kopplung der Haushaltsgeräte und der Heizungs- und Lüftungstechnik des Gebäudes. Grundgedanke dabei ist die Nutzung von Synergien bei Komponenten und Wärmeströmen, wie der Wärmepumpe als Kälteaggregat für den Kühlschrank, und die effiziente Nutzung von Abwärme der Haushaltsgeräte für die Warmwasserbereitung und Raumheizung. KW - Energieeffizienz KW - energiBUS4home Y1 - 2018 SN - 1865-5432 VL - 54 IS - 11 SP - 50 EP - 56 PB - Hüthig ER - TY - JOUR A1 - Neef, Matthias A1 - Zielke, Thomas A1 - Fussenecker, Claudia T1 - „Engineering Conferences“: Wissenschaftlich Kommunizieren im Master JF - Die Neue Hochschule Y1 - 2017 VL - 58 IS - 3 ER - TY - JOUR A1 - Roedder, Maximilian A1 - Neef, Matthias A1 - Laux, Christoph A1 - Priebe, Klaus-P. T1 - Systematic Fluid Selection for Organic Rankine Cycles and Performance Analysis for a Combined High and Low Temperature Cycle JF - Journal of Engineering for Gas Turbines and Power N2 - The organic Rankine cycle (ORC) is an established thermodynamic process that converts waste heat to electric energy. Due to the wide range of organic working fluids available the fluid selection adds an additional degree-of-freedom to the early design phase of an ORC process. Despite thermodynamic aspects such as the temperature level of the heat source, other technical, economic, and safety aspects have to be considered. For the fluid selection process in this paper, 22 criteria were identified in six main categories while distinguishing between elimination (EC) and tolerance criteria (TC). For an ORC design, the suggested method follows a practical engineering approach and can be used as a structured way to limit the number of interesting working fluids before starting a detailed performance analysis of the most promising candidates. For the first time, the selection process is applied to a two-stage reference cycle, which uses the waste heat of a large reciprocating engine for cogeneration power plants. It consists of a high temperature (HT) and a low temperature (LT) cycle in which the condensation heat of the HT cycle provides the heat input of the LT cycle. After the fluid selection process, the detailed thermodynamic cycle design is carried out with a thermodynamic design tool that also includes a database for organic working fluids. The investigated ORC cycle shows a net thermal efficiency of about 17.4% in the HT cycle with toluene as the working fluid and 6.2% in LT cycle with isobutane as the working fluid. The electric efficiency of the cogeneration plant increases from 40.4% to 46.97% with the both stages of the two-stage ORC in operation. KW - Gas Turbines KW - Cycle Innovations KW - Energy KW - Power systems KW - Fluids Y1 - 2016 U6 - https://doi.org/10.1115/1.4031361 VL - 138 IS - 031701 EP - 3 PB - ASME ER - TY - JOUR A1 - Wolter, Nina A1 - Zekorn, Thomas A1 - Neef, Matthias T1 - Stationäre thermodynamische Prozesssimulationen am Beispiel eines Industriekraftwerks JF - BWK: das Energie-Fachmagazin N2 - Um bauliche Veränderungen in bestehenden Kraftwerksprozessen auf ihre Wirkungsweise untersuchen und thermodynamisch beziehungsweise wirtschaftlich bewerten zu können, werden thermische Kraftwerksprozesse mit geeigneter Simulationssoftware abgebildet und in verschiedenen Detaillierungsstufen ausgelegt oder nachgerechnet. Im Folgenden wird ein Weg aufgezeigt, wie mit Hilfe einer stationären Simulationssoftware die Gesamtjahresbilanz eines Kraftwerks vorausberechnet werden kann. Mit Hilfe von Prozessdaten aus Vorjahren wird nachgewiesen, dass das Berechnungsmodell das bestehende Kraftwerk mit einer Abweichung von weniger als drei Prozent bezüglich erzeugter elektrischer Leistung und Brennstoffeinsatz und bei bekannter Dampfproduktion abbilden kann. Das so verifizierte Modell kann zur Untersuchung von Zubaumaßnahmen oder Veränderungen im Kraftwerksprozess eingesetzt werden. KW - Energiebilanz KW - Kraftwerk Y1 - 2016 VL - 68 IS - 6 SP - 6 EP - 10 ER - TY - CHAP A1 - Laux, Christoph A1 - Gotter, Andreas A1 - Neef, Matthias T1 - Experimental investigation of a low pressure steam Rankine cycle for waste heat utilization of internal combustion engines T2 - Proceedings of the 5th International Seminar on ORC Power Systems N2 - High heat losses via exhaust gas and coolant in internal combustion engines (ICE) are the basis for numerous investigations regarding downstream processes for power generation. The most promising concepts are Organic Rankine Cycles (ORC) and Steam Rankine Cycles (SRC). In previous work of the Center of Innovative Energy Systems, Düsseldorf (Germany), the technical and economic feasibility of a low pressure SRC has been investigated and the advantages in comparison to organic Rankine cycles are highlighted. A distinctive feature of the cycle is the use of the ICE coolant heat for evaporation, which limits the cycles maximum steam pressure to values below atmospheric pressure. This work presents first results of a test rig with data reconciliation according to DIN 2048 to validate the simulation results and design calculations. As a basis for the experimental investigations, a gas fired CHP plant was selected. The design of the test rig is optimized for the operation in the laboratory, where the coolant heat is emulated by a tempering device and the exhaust heat of the CHP plant is emulated by a gas burner. With the designed test rig, it is possible to control the volume flow and the temperatures of the coolant and exhaust gas, so that different load conditions of the gas fired CHP plant can be investigated. For initial tests, the turbine in the SRC is replaced by a throttle to achieve the pressure drop of the turbine. The experimental results show, that the exhaust and coolant heat of a 36 kWel CHP plant can be emulated and the performance expectations of the cycle can be met in stable steady-state conditions. Based on the measurement results and the turbine design calculations an electric power output of the cycle of 3.8 kW will be possible, which results in a cycle efficiency of about 6.5 % and an increase of the electrical power output of the CHP plant of about 10 %. The results show that the plant concept is technically feasible and, with further optimization, also represents an alternative to ORC plants in terms of increasing the efficiency of a cogeneration plant. Y1 - 2019 SN - 978-90-9032038-0 PB - The National Technical University of Athens (NTUA) CY - Athens ER - TY - CHAP A1 - Kramer, Tim A1 - Lerner, Igor A1 - Sacher, Patrick A1 - Neef, Matthias A1 - Baier, André ED - Dederichs-Koch, Andrea ED - Mohnert, Andrea ED - Kammasch, Gudrun T1 - Blue Engineering: Was ist das und wie gelingt die Implementierung an meiner Hochschule? T2 - Diversität und Kulturelle Vielfalt - Differenzieren, Individualisieren - oder Integrieren? Wege zu technischer Bildung : Referate der 13. Ingenieurpädagogischen Regionaltagung 2018 and der Hochschule Bochum vom 7.-9. Juni 2018 KW - Blue Engineering KW - Diversität Y1 - 2018 SN - 978-3-9818728-2-8 PB - Ingenieur-Pädagogische Wissensgesellschaft (IPW) CY - Berlin ER - TY - RPRT A1 - Neef, Matthias A1 - Laux, Christoph T1 - Optimierung des elektrischen Nutzungsgrades eines Blockheizkraftwerks durch Abwärmeverwertung in einem nachgeschalteten Dampfkraftprozess N2 - Abschlussbericht Förderung: Bundesministerium für Bildung und Forschung (BMBF) Förderkennzeichen: 03FH006I2 Projektzeitraum: 31.08.2012 -31.08.2015 Y1 - 2016 U6 - https://doi.org/10.2314/GBV:867675985 CY - Düsseldorf ER - TY - CHAP A1 - Helm, Peter A1 - Pugachev, Alexander A1 - Neef, Matthias T1 - Breaking the Swirl With Brush Seals: Numerical Modeling and Experimental Evidence T2 - Proceedings of the ASME Turbo Expo 2008 : presented at the 2008 ASME Turbo Expo, June 9 - 13, 2008, Berlin, Germany N2 - Striving for smaller losses in turbomachinery has led to many advancements in the design of seals. Modern sealing concepts such as brush seals hold a great potential to increase the efficiency of both flight engines and stationary turbines. At the same time, in order to maintain stable operating conditions of the rotor, swirl-induced forces must be kept at a minimum in the sealing channels. Therefore, the influence of the permeable and flexible bristle pack of brush seals on the flow around the rotor surface must be known. In this paper the swirl flow in the cavities of two different seal geometries is studied experimentally and numerically. A conventional three-tooth labyrinth serves as a reference. A second seal arrangement with a bristle pack upstream of two teeth is compared with the reference labyrinth. The swirl is evaluated experimentally from total and static pressure measurements in various axial and circumferential positions. Additionally, the axial swirl distribution is calculated using computational fluid dynamics (CFD). Here, the numerical model of the brush seal is based on the porous medium approach and is calibrated using the experimental values of the leakage and the bristle clearance by adjusting the thickness of the bristle pack. The calibrated CFD model is then used to study the impact of the brush seal on the swirl component of the sealing flow. The observed significant decrease of the swirl by the brush seal shows good agreement with the experimental data. The impact of changes in bristle pack clearance on the swirl is also investigated and compared with experimental evidence. The aim is to show that the brush seals have a natural tendency to interrupt seal swirl. They can therefore be used for swirl control in order to create a beneficial impact on the dynamic stability of turbomachines. Y1 - 2008 SN - 978-0-7918-4314-7 U6 - https://doi.org/10.1115/GT2008-50257 VL - 4 SP - 1387 EP - 1396 PB - ASME CY - New York ER - TY - CHAP A1 - Hurd, Paul A1 - Truckenmueller, Frank A1 - Thamm, Norbert A1 - Pollak, Helmut A1 - Neef, Matthias A1 - Deckers, Mathias T1 - Modern Reaction HP/IP Turbine Technology Advances and Experiences T2 - Proceedings of the ASME Power Conference - 2005 : includes papers from the 2005 International Conference on Power Engineering (ICOPE) ; presented at the 2005 ASME Power Conference, April 5 - 7, 2005, Chicago, Illinois, USA Y1 - 2005 UR - https://asmedigitalcollection.asme.org/POWER/proceedings/POWER2005/41820/425/311927 SN - 0-7918-4182-0 U6 - https://doi.org/10.1115/PWR2005-50085 SP - 425 EP - 435 PB - ASME CY - New York ER - TY - CHAP A1 - Völker, Lutz A1 - Casey, Michael A1 - Neef, Matthias A1 - Stüer, Heinrich T1 - The Flow Field and Performance of a Model Low Pressure Steam Turbine T2 - 6th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics : conference proceedings; 7-11 March 2005, Lille, France N2 - A 3-stage model of a low pressure steam turbine has been equipped with extensive instrumentation to assess aerodynamic performance and for validation of numerical methods. Emphasis was placed on detailed measurements at the inlet and exit of the last stage guide vane. Two configurations were examined – the first used a guide vane with lean in the last stage and a the second used a guide vane combining both lean and sweep. The experimental results from the two configurations have been compared with data from various design methods, ranging from through-flow to 3D multistage viscous simulations with mixing planes. Despite the challenges in modelling complex rotating blades in a wet steam environment, good agreement between the numerical and experimental results was obtained, and the new stator vane combining lean and sweep achieved the desired increase in reaction at the hub section. Y1 - 2005 CY - Lille ER - TY - CHAP A1 - Windte, Jan A1 - Radespiel, Rolf A1 - Neef, Matthias ED - Kroll, Norbert ED - Fassbender, Jens K. T1 - Aerodynamic Analysis of Flapping Airfoil Propulsion at Low Reynolds Numbers T2 - MEGAFLOW - Numerical Flow Simulation for Aircraft Design KW - Lift Curve KW - Chord Length KW - Pitch Motion KW - Laminar Separation Bubble KW - Combine Motion Y1 - 2005 SN - 978-3-540-24383-0 U6 - https://doi.org/10.1007/3-540-32382-1_21 VL - NNFM, 89 SP - 299 EP - 313 PB - Springer-Verlag CY - Berlin, Heidelberg ER - TY - CHAP A1 - Neef, Matthias A1 - Hummel, D. ED - Krause, Egon ED - Jäger, Willi T1 - Euler and Navier-Stokes Solutions for Flapping Wing Propulsion T2 - High Performance Computing in Science and Engineering ’01 KW - Wing Motion KW - Computational Fluid Dynamics KW - High Performance Computing KW - Thrust Coefficient Y1 - 2002 SN - 978-3-642-62719-4 U6 - https://doi.org/10.1007/978-3-642-56034-7_37 VL - 30 SP - 386 EP - 395 PB - Springer CY - Berlin ER - TY - CHAP A1 - Neef, Matthias A1 - Hummel, Dietrich ED - Mueller, Thomas J. T1 - Euler Solutions for a Finite-Span Flapping Wing T2 - Fixed and Flapping Wing Aerodynamics for Micro Air Vehicle Applications Y1 - 2001 SN - 978-1-56347-517-7 U6 - https://doi.org/10.2514/5.9781600866654.0429.0451 VL - 16 SP - 429 EP - 451 PB - American Institute of Aeronautics and Astronautics CY - Reston, VA ER - TY - JOUR A1 - Neef, Matthias A1 - Fritzen, J. P. A1 - Schumacher, G. T1 - Evaluation of mount loads in dynamic testing of a jet engine JF - Mechanical Systems and Signal Processing N2 - In the dynamic testing of jet engines the evaluation of loads on the mount structure is vital for comparison with finite element calculations of such testing. Measuring these loads with the help of strain gauges applied to the structure becomes difficult if the mount is overdetermined and thus not every strain gauge can be assigned to a single load direction. In this study, the overdetermined mount structure of the BR715 engine was examined at one of the three mounting points between the Boeing 717 airframe and the engine, where loads in five directions were reacted. Firstly, the dependence of five measured strains upon known static load conditions at the mounting point had to be determined. For this purpose a static calibration test was carried out where defined forces and moments in known directions were applied to the structure while the output from five strain gauges was measured accordingly. The result was the desired relationship between loads and strains in terms of a matrix, which yields the corresponding load condition of the examined mounting point if multiplied with a set of strains. The same calibration procedure was carried out with a finite element model of the mount, where direct comparison to dynamic load results from the model itself was possible. With this model the validity of the above method was shown as well as possible errors which may occur while evaluating dynamic test results. The method was found to give satisfactory results even for dynamic loading, although some inertia forces disturb the signals in dynamic testing. Finally, the results from an actual dynamic engine test were processed into loads and then compared to the simulated loads from a finite element model of the engine. Good agreement was found and the indication of any remaining discrepancies was used to update the model for an even better representation of the dynamic test loads. Y1 - 2003 UR - http://www.sciencedirect.com/science/article/pii/S0888327001914050 U6 - https://doi.org/10.1006/mssp.2001.1405 VL - 17 IS - 3 SP - 665 EP - 681 PB - Elsevier ER - TY - CHAP A1 - Jones, Kevin A1 - Castro, Breno A1 - Mahmoud, Osama A1 - Pollard, S. A1 - Platzer, Max A1 - Neef, Matthias A1 - Gonet, K. A1 - Hummel, D. T1 - A collaborative numerical and experimental investigation of flapping-wing propulsion T2 - 40th AIAA Aerospace Sciences Meeting & Exhibit N2 - An international, collaborative investigation is undertaken to evaluate the relative merits and limitations of various numerical methods and experimental measurement techniques, specifically for the analysis of flapping-wing propulsion. A finite aspect-ratio configuration is extensively investigated, both quantitatively and qualitatively, in a low-speed wind tunnel. Direct force measurements are made, as well as time-accurate and time-averaged laser Doppler velocimetry and unsteady flow visualization. The reduced frequency, mean angle of attack, aspect ratio and Reynolds number are varied in the experiments. The experiment is numerically simulated using flatplate theory, two and three-dimensional panel codes, and two and three-dimensional Euler and Navier- Stokes solvers. The ability of each of the methods to capture important aspects of the flow physics are evaluated through comparisons with each other and the experimental data. Additionally, the comparisons indicate areas where further research is needed. The collaborative effort provides a survey of available capabilities and provides a fixed set of flappingwing data for others to compare against. Y1 - 2002 UR - http://arc.aiaa.org/doi/book/10.2514/MASM02 U6 - https://doi.org/10.2514/6.2002-706 PB - American Institute of Aeronautics and Astronautics CY - Reston, Virigina ER - TY - CHAP A1 - Feseker, Daniel A1 - Kinell, Mats A1 - Neef, Matthias ED - The American Society of Mechanical Engineers, T1 - Experimental Study on Pressure Losses in Circular Orifices With Inlet Cross Flow T2 - Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2017: presented at the ASME Turbo Expo 2017: Turbine Technical Conference and Exposition, June 26-30, 2017 N2 - The ability to understand and predict the pressure losses of orifices is important in order to improve the air flow within the secondary air system. This experimental study investigates the behavior of the discharge coefficient for circular orifices with inlet cross flow which is a common flow case in gas turbines. Examples of this are at the inlet of a film cooling hole or the feeding of air to a blade through an orifice in a rotor disk. Measurements were conducted for a total number of 38 orifices, covering a wide range of length-to-diameter ratios, including short and long orifices with varying inlet geometries. Up to five different chamfer-to-diameter and radius-to-diameter ratios were tested per orifice length. Furthermore, the static pressure ratio across the orifice was varied between 1.05 and 1.6 for all examined orifices. The results of this comprehensive investigation demonstrate the beneficial influence of rounded inlet geometries and the ability to decrease pressure losses, which is especially true for higher cross flow ratios where the reduction of the pressure loss in comparison to sharp-edged holes can be as high as 54%. With some exceptions, the chamfered orifices show a similar behavior as the rounded ones but with generally lower discharge coefficients. Nevertheless, a chamfered inlet yields lower pressure losses than a sharp-edged inlet. The obtained experimental data were used to develop two correlations for the discharge coefficient as a function of geometrical as well as flow properties. Y1 - 2017 UR - https://asmedigitalcollection.asme.org/GT/proceedings/GT2017/50886/Charlotte, North Carolina, USA/241903 SN - 978-0-7918-5088-6 U6 - https://doi.org/10.1115/GT2017-64143 PB - The American Society of Mechanical Engineers CY - New York ER - TY - CHAP A1 - Frank, Lena A1 - Rödder, Maximilian A1 - Neef, Matthias A1 - Adam, Mario T1 - Heizung, Lüftung, Weiße Ware – ein integriertes Systemkonzept für das Haus der Zukunft T2 - Deutsche Kälte- und Klimatagung 2017 Bremen KW - Heizung KW - EnerTEG Y1 - 2017 SN - 9783932715938 SP - 1028 EP - 1041 CY - Stuttgart ER - TY - CHAP A1 - Neef, Matthias A1 - Zielke, Thomas A1 - Fussenecker, Claudia ED - Danish Network for Engineering Education, T1 - Engineering Conferences - An Innovative Course for Master Students in Engineering T2 - Exploring Teaching for Active Learning in Engineering Education N2 - This poster summarizes a few facts, figures and resources related to the Master course ”Engineering Conferences”. KW - Poster Y1 - 2017 SN - 978-87-998898-1-5 PB - Danish Network for Engineering Education (IUPN) CY - Odense ER - TY - CHAP A1 - Neef, Matthias A1 - Zielke, Thomas A1 - Fussenecker, Claudia ED - Danish Network for Engineering Education, T1 - Engineering Conferences - An Innovative Course for Master Students in Engineering T2 - Exploring Teaching for Active Learning in Engineering Education N2 - A course called "Engineering Conferences" is presented that the authors have developed and installed as a mandatory part of the curriculum in Master programs for engineering students. The idea is to go beyond teaching the standards of academic writing and skills for working with scientific publications. By using a learner-centered approach, we get the students engaged in typical activities around an active attendance of a real conference. They write a paper complying with common academic standards, submit the paper and review submissions of their fellow students. Students also produce a poster and have to defend it in a poster session held publicly on campus. In this article, we present our rationale to develop the course and our results from the first semester teaching this course. This includes the presentation of useful resources for teaching and organizing scientific publishing as well as our reflected learning experience regarding the student's understanding of significance for scientific publishing. KW - Engineering Conference Y1 - 2017 SN - 978-87-998898-1-5 SP - 13 EP - 24 CY - Odense ER - TY - CHAP A1 - Zielke, Thomas A1 - Neef, Matthias A1 - Fussenecker, Claudia T1 - Teaching Engineering Conferences T2 - Proceedings of the Canadian Engineering Education Association (CEEA) Conference N2 - This article is on a university course called Engineering Conferences. It has been developed by the authors and installed as a mandatory part of the curriculum in three master’s degree programs for engineering students. The participants of the course are postgraduates with different nationalities, mostly German, and different technical backgrounds. They study Mechanical Engineering, Simulation and Experimental Technology, or International Business Engineering. The basic idea of the course concept goes far beyond simply teaching the standards of academic writing and skills for using scientific publications. By using a learnercentered approach, the students get engaged in typical activities around an active attendance of a real conference. Students learn to locate the field of their bachelor thesis or project report in the world of research communities, scientific journals and engineering conferences. They learn about conferences matching their bachelor/project topic. They write a paper complying with common academic standards, submit it to a mock-up conference, and review submissions of their fellow students. Students also produce a poster and have to defend it in a poster session held publicly on the campus. Engineering Conferences is a course on scientific communication and presentation that also aims at the development of other skills and competences needed in the world of modern engineering. KW - Engineering Conferences Y1 - 2017 CY - Winnipeg ER - TY - CHAP A1 - Laux, Christoph A1 - Goebel, Johannes A1 - Neef, Matthias A1 - Gotter, Andreas T1 - Investigation in the Technical and Economic Feasibility of a Low-Pressure Steam Cycle for the Waste Heat Utilization of a Cogeneration Plant T2 - Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2015 : presented at the ASME 2015 Turbo Expo: Turbine Technical Conference and Exposition, June 15 - 19, 2015, Montreal, Quebec, Canada / sponsored by the International Gas Turbine Institute N2 - This paper deals with the investigation in the technical and economic feasibility of a low-pressure steam cycle for the waste heat utilization of a combined heat and power (CHP) plant. The proposed steam cycle uses a pressure level below atmospheric pressure which allows to use the heat from the motor’s coolant for evaporation. The cycle is designed to increase the maximum electrical efficiency of a gas fired reciprocating engine and to increase operational flexibility for varying heat demand. Since organic Rankine cycle (ORC) plants are already being successfully used for waste heat recovery, advantages of the low-pressure steam Rankine cycle (SRC) over an ORC are highlighted. Many ORC fluids are toxic or flammable and thus have an increased risk potential compared to water. An additional advantage of water compared to ORC fluids is the possibility of superheating above 500 °C. The technical feasibility of the proposed cycle is studied by the detailed design of the individual system components such as turbine, heat exchangers and auxiliary parts. This includes the detailed thermodynamic design of the full cycle for the calculation of plant efficiencies. As a basis for future experimental investigations, a cogeneration plant with an electrical output of 50 kWel was selected as a heat source for the steam cycle. The design geometries of the turbine and the heat exchanger are presented along with efficiency and cost predictions. A subsonic radial turbine with a rotational speed of 155,000 rpm was selected. The maximum turbine output is about 7.5 kW. The use of a flash evaporator is investigated to reduce the size and the costs for the evaporator. The suggested steam cycle helps to increase the electrical efficiency of the CHP plant by 4.5% points from an original 36.5% to 41.0%. The steam cycle itself has an electrical efficiency of approximately 9%. Additionally, the condensation temperature in this steam cycle is high enough to be extracted as useful heat output to generate domestic water with a temperature of 50°C. Y1 - 2015 SN - 978-0-7918-5667-3 VL - 3: Coal, biomass and alternative fuels - cycle innovations - electric power - industrial and cogeneration PB - International Gas Turbine Institute (ASME) CY - New York ER - TY - CHAP A1 - Rödder, Maximilian A1 - Laux, Christoph A1 - Neef, Matthias T1 - Systematic fluid selection in early stages of ORC design: a practical engineering approach T2 - Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2015 : presented at the ASME 2015 Turbo Expo: Turbine Technical Conference and Exposition, June 15 - 19, 2015, Montreal, Quebec, Canada / sponsored by the International Gas Turbine Institute Y1 - 2015 SN - 978-0-7918-5667-3 VL - 3: Coal, biomass and alternative fuels - cycle innovations - electric power - industrial and cogeneration PB - International Gas Turbine Institute (ASME) CY - New York ER - TY - CHAP A1 - Rödder, Maximilian A1 - Spiegel, Thomas A1 - Frank, Lena A1 - Neef, Matthias A1 - Adam, Mario ED - Großmann, Uwe ED - Kunold, Ingo T1 - Integration eines multifunktionalen Wärmepumpensystems als Hardware-in-the-Loop in ein Niederspannungsnetzmodell T2 - Smart Energy and Systems 2019: Digitalisierung - Anwendungen in Technik und Industriegesellschaft, 10. Fachtagung, 04.-05.11.2019, Dortmund KW - energiBUS4home Y1 - 2019 SP - 70 EP - 77 PB - vwh Verlag Werner Hülsbusch Fachverlag für Medientechnik und -wirtschaft CY - Glückstadt ER - TY - CHAP A1 - Neef, Matthias A1 - André, Baier T1 - Blue Engineering: Ingenieur_innen mit ökologischer und sozialer Verantwortung - ein Studierenden-getriebenes, modulares Seminar-Konzept T2 - DGHD-Jahrestagung KW - Poster Y1 - 2019 UR - https://www.researchgate.net/publication/331327194_Blue_Engineering_Ingenieur_innen_mit_okologischer_und_sozialer_Verantwortung_-_ein_Studierenden-getriebenes_modulares_Seminar-Konzept PB - Universität Leipzig CY - Leipzig ER - TY - JOUR A1 - Al-Sadawi, L. A1 - Biedermann, Till M. A1 - Fritsche, M. T1 - Passive Control of Vortex Shedding Noise of Circular Cylinders by Passive Air-Jet Blowing JF - Journal of Aerospace Engineering KW - Mechanical Engineering KW - Aerospace Engineering KW - General Materials Science KW - Civil and Structural Engineering Y1 - 2021 U6 - https://doi.org/10.1061/(asce)as.1943-5525.0001301 SN - 0893-1321 VL - 34 IS - 5 PB - American Society of Civil Engineers (ASCE) ER - TY - CHAP A1 - Zielke, Thomas A1 - Bernst, Irina A1 - Crombach, Tobias A1 - Becker, Martin A1 - Lippel, Jens ED - Gómez Chova, Luis ED - López Martínez, A. ED - Candel Torres, I. T1 - WHAT CAN BE LEARNED BY GRADING ANALYTICS? T2 - INTED 2018: 12th International Technology, Education and Development Conference : 5-7 March, 2018, Valencia (Spain) : conference proceedings Y1 - 2018 SN - 978-84-697-9480-7 U6 - https://doi.org/10.21125/inted.2018.0593 VL - 12th International Technology, Education and Development Conference SP - 3097 EP - 3106 PB - IATED Academy CY - Valencia, Spain ER - TY - CHAP A1 - Becker, Martin A1 - Lippel, Jens A1 - Zielke, Thomas ED - Vezzani, Roberto T1 - Dimensionality Reduction for Data Visualization and Linear Classification, and the Trade-off between Robustness and Classification Accuracy T2 - Proceedings of ICPR 2020: 25th International Conference on Pattern Recognition, 10-15 January 2021, Milan Y1 - 2021 SN - 978-1-72818-808-9 U6 - https://doi.org/10.1109/ICPR48806.2021.9412865 SP - 6478 EP - 6485 PB - IEEE CY - Piscataway, NJ ER - TY - CHAP A1 - Becker, Martin A1 - Lippel, Jens A1 - Zielke, Thomas T1 - Gradient Descent Analysis: On Visualizing the Training of Deep Neural Networks T2 - VISIGRAPP 2019: Proceedings of the 14th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications : Prague, Czech Republic, February 25-27, 2019 Y1 - 2019 SN - 978-989-758-354-4 U6 - https://doi.org/10.5220/0007583403380345 VL - Volume: 3 SP - 338 EP - 345 PB - INSTICC ER - TY - JOUR A1 - Schmidt, Stefan A1 - Göbel, Christoph A1 - Nebel, Janine A1 - Wiesmann, Thomas A1 - Hamel, Christian A1 - Reinsdorf, Arne A1 - Wolf, Dorit A1 - Gehrmann, Stefan A1 - Tenhumberg, Nils A1 - Muhler, Martin A1 - Kaluza, Stefan T1 - Recent Developments in the Conversion of Synthesis Gas to Short-Chain Alcohols over Cu-Co-Based Catalysts JF - Chemie Ingenieur Technik Y1 - 2018 U6 - https://doi.org/10.1002/cite.201800023 SN - 1522-2640 VL - 90 IS - 10 SP - 1465 EP - 1475 PB - Wiley ER - TY - JOUR A1 - Weide, Philipp A1 - Schulz, Katharina A1 - Kaluza, Stefan A1 - Rohe, Markus A1 - Beranek, Radim A1 - Muhler, Martin T1 - Controlling the Photocorrosion of Zinc Sulfide Nanoparticles in Water by Doping with Chloride and Cobalt Ions JF - Langmuir Y1 - 2016 UR - http://www.ncbi.nlm.nih.gov/pubmed/27934521 U6 - https://doi.org/10.1021/acs.langmuir.6b03385 SN - 1520-5827 VL - 32 IS - 48 SP - 12641 EP - 12649 PB - ACS Publ. ER - TY - CHAP A1 - Stuhlsatz, Andre A1 - Lippel, Jens A1 - Zielke, Thomas T1 - Discriminative feature extraction with Deep Neural Networks T2 - The 2010 International Joint Conference on Neural Networks (IJCNN), 18.07.2010 - 23.07.2010, Barcelona, Spain Y1 - 2010 UR - http://ieeexplore.ieee.org/document/5596329/ SN - 978-1-4244-6916-1 U6 - https://doi.org/10.1109/IJCNN.2010.5596329 SP - 1 EP - 8 PB - IEEE ER - TY - JOUR A1 - Wiesmann, Thomas A1 - Hamel, Christian A1 - Kaluza, Stefan T1 - Techniques to Remove Traces of Oxygen by Catalytic Conversion from Gas Mixtures JF - Chemie Ingenieur Technik Y1 - 2018 U6 - https://doi.org/10.1002/cite.201800022 SN - 1522-2640 VL - 90 IS - 10 SP - 1446 EP - 1452 PB - Wiley ER - TY - JOUR A1 - Titus, Juliane A1 - Kaluza, Stefan A1 - Marschall, Roland T1 - German Catalysis on an International Scale in Weimar JF - ChemCatChem Y1 - 2014 U6 - https://doi.org/10.1002/cctc.201402266 SN - 1867-3899 VL - 6 IS - 6 SP - 1523 EP - 1525 PB - Wiley ER - TY - JOUR A1 - Kaluza, Stefan A1 - Behrens, Malte A1 - Schiefenhövel, Nora A1 - Kniep, Benjamin A1 - Fischer, Richard A1 - Schlögl, Robert A1 - Muhler, Martin T1 - A Novel Synthesis Route for Cu/ZnO/Al2O3 Catalysts used in Methanol Synthesis: Combining Continuous Consecutive Precipitation with Continuous Aging of the Precipitate JF - ChemCatChem Y1 - 2011 U6 - https://doi.org/10.1002/cctc.201000329 SN - 1867-3899 VL - 3 IS - 1 SP - 189 EP - 199 PB - Wiley ER - TY - JOUR A1 - Kaluza, Stefan A1 - Muhler, Martin T1 - On the Role of Aging, Washing, and Drying in the Synthesis of Polycrystalline Zinc Oxide by Precipitation: Combining Fast Continuous Mixing, Spray Drying and Freeze Drying to Unravel the Solid-State Transformations of the Precipitate JF - Catalysis Letters Y1 - 2009 UR - 1572-879X U6 - https://doi.org/10.1007/s10562-008-9818-5 N1 - The authors gratefully acknowledge fruitful discussions with Malte Behrens and Robert Schlögl, and the financial support by the BMBF (Bundesministerium für Bildung und Forschung) within the scope of the project 01RI05028 “Entwicklung von Methanolsynthesekatalysatoren als Basis für nachhaltige Ressourcennutzung” VL - 129 IS - 3-4 SP - 287 EP - 292 PB - Springer ER - TY - CHAP A1 - Kaluza, Stefan A1 - Muhler, Martin ED - Gaigneaux, E. M. ED - Devillers, M. ED - Hermans, S. ED - Jacobs, P. A. ED - Martens, J. A. ED - Ruiz, P. T1 - A novel continuous approach for the synthesis and characterization of pure and mixed metal oxide systems applied in heterogeneous catalysis T2 - Scientific Bases for the Preparation of Heterogeneous Catalysts Y1 - 2010 SN - 978-0-444-53601-3 U6 - https://doi.org/10.1016/S0167-2991(10)75027-8 VL - Studies in Surface Science and Catalysis, 175 SP - 217 EP - 220 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Mei, Bastian A1 - Sánchez, Miguel D. A1 - Reinecke, Thomas A1 - Kaluza, Stefan A1 - Xia, Wei A1 - Muhler, Martin T1 - The synthesis of Nb-doped TiO2 nanoparticles by spray drying: an efficient and scalable method JF - Journal of Materials Chemistry Y1 - 2011 U6 - https://doi.org/10.1039/c1jm11431j SN - 1364-5501 VL - 21 IS - 32 SP - 11781 EP - 11790 PB - Royal Society of Chemistry (RSC) ER - TY - JOUR A1 - Kaluza, Stefan A1 - Schröter, Marie Katrin A1 - Naumann d'Alnoncourt, Raoul A1 - Reinecke, Thomas A1 - Muhler, Martin T1 - High Surface Area ZnO Nanoparticles via a Novel Continuous Precipitation Route JF - Advanced Functional Materials Y1 - 2008 U6 - https://doi.org/10.1002/adfm.200800457 SN - 1616-3028 N1 - The authors gratefully acknowledge fruitful discussions with Malte Behrens and Robert Schlögl, and financial support by the BMBF (Bundesministerium für Bildung und Forschung, project 01RI05028 “Entwicklung von Methanolsynthesekatalysatoren als Basis für nachhaltige Ressourcennutzung”). Supporting Information is available online from Wiley InterScience or from the author. VL - 18 IS - 22 SP - 3670 EP - 3677 ER - TY - JOUR A1 - Peter, Maximilian A1 - Fichtl, Matthias B. A1 - Ruland, Holger A1 - Kaluza, Stefan A1 - Muhler, Martin A1 - Hinrichsen, Olaf T1 - Detailed kinetic modeling of methanol synthesis over a ternary copper catalyst JF - Chemical Engineering Journal Y1 - 2012 U6 - https://doi.org/10.1016/j.cej.2012.06.066 SN - 0009-2509 VL - 203 SP - 480 EP - 491 PB - Elsevier ER - TY - JOUR A1 - Kaluza, Stefan A1 - Muhler, Martin T1 - On the precipitation mechanism and the role of the post-precipitation steps during the synthesis of binary ZnO–Al2O3 composites with high specific surface area JF - Journal of Materials Chemistry KW - FBMV Y1 - 2009 U6 - https://doi.org/10.1039/b902004g SN - 1364-5501 VL - 19 IS - 23 SP - 3914 EP - 3922 PB - Royal Society of Chemistry (RSC) ER - TY - JOUR A1 - Girod, Kai A1 - Breitkreuz, Klaas A1 - Gerstner, Andrea A1 - Marzi, Thomas A1 - Schulzke, Tim A1 - Kaluza, Stefan T1 - Close‐to‐Practice Investigations of Heterogeneously Catalyzed Syngas Conversions in Slurry and Fixed‐Bed Reactor Systems JF - Chemie Ingenieur Technik Y1 - 2018 U6 - https://doi.org/10.1002/cite.201700143 SN - 1522-2640 VL - 90 IS - 5 SP - 690 EP - 695 PB - Wiley ER - TY - CHAP A1 - Hamel, Christian A1 - Kaluza, Stefan A1 - Unger, Christoph ED - Ernst, Stefan T1 - Catalytic tar reforming of biomass-derived synthesis gas: Influence of the catalyst, gas composition and sulfur poisoning T2 - Preprints of the DGMK-Conference "Synthesis Gas Chemistry",October 7 - 9, 2015, Dresden Y1 - 2015 SN - 978-3-941721-56-2 VL - DGMK Tagungsbericht, 2015,2 SP - 139 EP - 146 PB - DGMK CY - Hamburg ER - TY - JOUR A1 - Engeldahl, Barthel A1 - Özaslan, Mehtap A1 - Marschall, Roland A1 - Rose, Marcus A1 - Kaluza, Stefan A1 - Titus, Juliane A1 - Sprung, Christoph T1 - Weimar 2015: Catalysing Tomorrow’s Solutions JF - ChemCatChem Y1 - 2015 U6 - https://doi.org/10.1002/cctc.201500435 SN - 1867-3899 VL - 7 IS - 12 SP - 1794 EP - 1796 PB - Wiley ER - TY - JOUR A1 - Heeskens, Denise A1 - Aghaei, Pedram A1 - Kaluza, Stefan A1 - Strunk, Jennifer A1 - Muhler, Martin T1 - Selective oxidation of ethanol in the liquid phase over Au/TiO 2 JF - physica status solidi (b) Y1 - 2013 U6 - https://doi.org/10.1002/pssb.201248440 SN - 1521-3951 VL - 250 IS - 6 SP - 1107 EP - 1118 PB - Wiley ER - TY - JOUR A1 - Boz, İsmail A1 - Kaluza, Stefan A1 - Boroğlu, Mehtap Şafak A1 - Muhler, Martin T1 - Synthesis of high surface area ZnO powder by continuous precipitation JF - Materials Research Bulletin Y1 - 2012 U6 - https://doi.org/10.1016/j.materresbull.2012.02.005 SN - 1873-4227 VL - 47 IS - 5 SP - 1185 EP - 1190 PB - Elsevier ER - TY - JOUR A1 - Engel, Rebecca V. A1 - Kaluza, Stefan A1 - Oezaslan, Mehtap A1 - Peitz, Stephan T1 - German Catalysis Meeting - 50 Years and as Young as Ever JF - ChemCatChem Y1 - 2017 U6 - https://doi.org/10.1002/cctc.201700683 SN - 1867-3899 VL - 9 IS - 11 SP - 2018 EP - 2020 PB - Wiley ER - TY - CHAP A1 - Anton, Johan A1 - Nebel, Janine A1 - Froese, Christian A1 - Kleinschmidt, Ralph A1 - Quandt, Thomas A1 - Ruland, Holger A1 - Kaluza, Stefan A1 - Muhler, Martin ED - Ernst, Stefan T1 - Higher alcohol synthesis over Na-modified Co-Cu catalysts: Co2C formation and effect of surface composition T2 - Preprints of the DGMK-Conference "Synthesis Gas Chemistry", October 7 - 9, 2015, Dresden N2 - Cu–Co-based model catalysts were prepared by a sophisticated alkali-free synthesis method and tested in the conversion of synthesis gas to higher alcohols. MoO3-coated alumina was used as the support, providing both high specific surface area and strongly interacting sites for the deposition of the active metals. A bulk Cu/Co ratio of ~2 was found to be most suitable in terms of activity and product distribution. Surface enrichment of Mo for all samples was observed by XPS, which significantly influenced the performance of the catalysts. Mo was found to be both a structural and a chemical promoter. Strong metal–support interactions were further achieved by modification of alumina with magnesia. With 12 wt% Mg incorporated, the catalysts showed 40% total oxygenate selectivity including 11% selectivity to ethanol. Y1 - 2015 SN - 978-3-941721-56-2 VL - DGMK Tagungsbericht, 2015,2 PB - DGMK CY - Hamburg ER - TY - JOUR A1 - Anton, Johan A1 - Nebel, Janine A1 - Song, Huiqing A1 - Froese, Christian A1 - Weide, Philipp A1 - Ruland, Holger A1 - Muhler, Martin A1 - Kaluza, Stefan T1 - The effect of sodium on the structure–activity relationships of cobalt-modified Cu/ZnO/Al2O3 catalysts applied in the hydrogenation of carbon monoxide to higher alcohols JF - Journal of Catalysis Y1 - 2016 U6 - https://doi.org/10.1016/j.jcat.2015.12.016 SN - 0021-9517 VL - 335 SP - 175 EP - 186 PB - Elsevier ER - TY - JOUR A1 - Anton, Johan A1 - Nebel, Janine A1 - Song, Huiqing A1 - Froese, Christian A1 - Weide, Philipp A1 - Ruland, Holger A1 - Muhler, Martin A1 - Kaluza, Stefan T1 - Structure–activity relationships of Co-modified Cu/ZnO/Al2O3 catalysts applied in the synthesis of higher alcohols from synthesis gas JF - Applied Catalysis A: General Y1 - 2015 U6 - https://doi.org/10.1016/j.apcata.2015.07.002 SN - 0926-860X VL - 505 SP - 326 EP - 333 PB - Elsevier ER - TY - JOUR A1 - Anton, Johan A1 - Ruland, Holger A1 - Kaluza, Stefan A1 - Muhler, Martin T1 - Fast and Reproducible Testing of Cu–Co-Based Catalysts Applied in the Conversion of Synthesis Gas to Ethanol and Higher Alcohols JF - Catalysis Letters Y1 - 2015 U6 - https://doi.org/10.1007/s10562-015-1543-2 N1 - The work was part of the project “Bioethanol from synthesis gas—BETSY”, funded by the Ministry for Economy, Energy, Building, Habitation and Transportation of Northrhine-Westphalia within the program Ziel2.NRW financed by the European Union through the European regional development fund ERDF. VL - 145 IS - 7 SP - 1374 EP - 1381 PB - Springer ER - TY - JOUR A1 - Westkämper, Engelbert A1 - Niemann, Jörg A1 - Stolz, M. T1 - Digital information—potentials for TeleX applications JF - Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Y1 - 2002 U6 - https://doi.org/10.1243/0954405021520319 SN - 2041-2975 SN - 0954-4054 VL - 216 IS - 5 SP - 801 EP - 808 PB - sage journals ER - TY - JOUR A1 - Westkämper, Engelbert A1 - Niemann, Jörg A1 - Dauensteiner, A. T1 - Economic and ecological aspects in product life cycle evaluation JF - Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Y1 - 2001 U6 - https://doi.org/10.1243/0954405011518601 SN - 2041-2975 VL - 215 IS - 5 SP - 673 EP - 681 PB - sage journals ER - TY - CHAP A1 - Linditsch, Claudia A1 - Fussenecker, Claudia A1 - Niemann, Jörg A1 - Messnarz, Richard A1 - Penz, Eva A1 - Casey, Anette A1 - Stolfa, Jakub ED - Larrucea, Xabier ED - Santamaria, Izaskun ED - O'Connor, Rory V. ED - Messnarz, Richard T1 - ELIC – Building the New Generation of Engineers for Automotive in Europe T2 - Systems, Software and Services Process Improvement. 25th European Conference, EuroSPI 2018, Bilbao, Spain, September 5-7, 2018, Proceedings Y1 - 2018 SN - 978-3-319-97924-3 U6 - https://doi.org/10.1007/978-3-319-97925-0_55 SP - 654 EP - 665 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Ardelean-Baidoc, Raluca A1 - Oniga, Gabriel A1 - Niemann, Jörg A1 - Sava, Adriana A1 - Pîslă, Adrian A1 - (Keine Angabe), T1 - Change Management Aspects in Developing the International Airport “Avram Iancu” Cluj T2 - The proceedings of the 14th European Conference on Innovation and Entrepreneurship, 19-20 September 2019 Y1 - 2019 SN - 9781912764358 U6 - https://doi.org/10.34190/ECIE.19.092 PB - ACPI ER - TY - CHAP A1 - Niemann, Jörg A1 - Westkämper, Engelbert ED - Brissaud, Daniel ED - Tichkiewitch, Serge ED - Zwolinski, Peggy T1 - Dynamic life cycle performance simulation of production systems T2 - Innovation in Life Cycle Engineering and Sustainable Development Y1 - 2006 SN - 978-1-4020-4601-8 U6 - https://doi.org/10.1007/1-4020-4617-0_29 SP - 419 EP - 428 PB - Springer Netherlands CY - Dordrecht ER - TY - JOUR A1 - Dehmer, Joanna A1 - Kutzera, Ana-Alicia A1 - Niemann, Jörg T1 - Digitalisierung von Geschäftsmodellen durch plattformbasiertes Value Chain Management JF - zwf – Zeitschrift für wirtschaftlichen Fabrikbetrieb Y1 - 2017 U6 - https://doi.org/10.3139/104.111697 SN - 0947-0085 VL - 112 IS - 4 SP - 253 EP - 256 PB - Hanser ER - TY - CHAP A1 - Trofimov, Igor A1 - Jahr, Andreas T1 - Zeitsignale im Massenstrom eines Linearschwingförderers zur Nutzung für Regelungsaufgaben T2 - IFToMM D-A-CH Konferenz / Vierte IFToMM D-A-CH Konferenz 2018 Y1 - 2018 U6 - https://doi.org/10.17185/duepublico/45302 SP - 1 EP - 9 PB - DuEPublico CY - Duisburg-Essen ER - TY - JOUR A1 - Westkämper, Engelbert A1 - Niemann, Jörg A1 - Stierle, Thomas T1 - Systemorientierte Produktionsstrukturen für den Werkzeugmaschinenbau JF - zwf – Zeitschrift für wirtschaftlichen Fabrikbetrieb Y1 - 2004 U6 - https://doi.org/10.3139/104.100805 SN - 0947-0085 VL - 99 IS - 9 SP - 461 EP - 464 PB - Hanser ER - TY - JOUR A1 - Niemann, Jörg A1 - Westkämper, Engelbert T1 - Lebenslaufumfassende Wirtschaftlichkeitsbetrachtungen JF - zwf – Zeitschrift für wirtschaftlichen Fabrikbetrieb KW - FBMV Y1 - 2003 U6 - https://doi.org/10.3139/104.100611 SN - 0947-0085 VL - 98 IS - 1-2 SP - 50 EP - 53 PB - Hanser ER - TY - JOUR A1 - Yang, Zhengxiong A1 - Kollmannsberger, Stefan A1 - Düster, Alexander A1 - Ruess, Martin A1 - Garcia, Eduardo Grande A1 - Burgkart, Rainer A1 - Rank, Ernst T1 - Non-standard bone simulation: interactive numerical analysis by computational steering JF - Computing and Visualization in Science Y1 - 2011 U6 - https://doi.org/10.1007/s00791-012-0175-y VL - 14 IS - 5 SP - 207 EP - 216 PB - Springer ER - TY - CHAP A1 - Niemann, Jörg A1 - Fussenecker, Claudia A1 - Schlösser, Martin ED - Walker, Alastair ED - O'Connor, Rory V. ED - Messnarz, Richard T1 - Eye Tracking for Quality Control in Automotive Manufacturing T2 - Systems, Software and Services Process Improvement Y1 - 2019 SN - 978-3-030-28004-8 U6 - https://doi.org/10.1007/978-3-030-28005-5_22 SP - 289 EP - 298 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Ruess, Martin A1 - Pahl, P. J. T1 - An extended QR-solver for large profiled matrices JF - International Journal for Numerical Methods in Engineering Y1 - 2009 U6 - https://doi.org/10.1002/nme.2618 SN - 1097-0207 VL - 79 IS - 11 SP - 1419 EP - 1442 PB - Wiley ER - TY - JOUR A1 - Zander, Nils A1 - Bog, Tino A1 - Elhaddad, Mohamed A1 - Espinoza, R. A1 - Hu, H. A1 - Joly, A. A1 - Wu, C. A1 - Zerbe, P. A1 - Düster, Alexander A1 - Kollmannsberger, Stefan A1 - Parvizian, J. A1 - Ruess, Martin A1 - Schillinger, Dominik A1 - Rank, Ernst T1 - FCMLab: A finite cell research toolbox for MATLAB JF - Advances in Engineering Software Y1 - 2014 U6 - https://doi.org/10.1016/j.advengsoft.2014.04.004 SN - 0965-9978 VL - 74 SP - 49 EP - 63 PB - Elsevier ER - TY - CHAP A1 - Ruess, Martin A1 - Varduhn, Vasco A1 - Rank, Ernst A1 - Yosibash, Zohar ED - Bader, Michael T1 - A Parallel High-Order Fictitious Domain Approach for Biomechanical Applications T2 - 11th International Symposium on Parallel and Distributed Computing (ISPDC), 2012 : 25 - 29 June 2012, Munich, Germany ; proceedings Y1 - 2012 UR - http://ieeexplore.ieee.org/document/6341523/ SN - 978-1-4673-2599-8 U6 - https://doi.org/10.1109/ISPDC.2012.45 SP - 279 EP - 285 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Ruess, Martin A1 - Mundani, Ralf-Peter A1 - Rank, Ernst T1 - Computational steering in dynamic structure simulation: An improved communication concept T2 - 2009 IEEE Toronto International Conference Science and Technology for Humanity (TIC-STH), Toronto, 26.09.2009 - 27.09.2009 Y1 - 2009 UR - http://ieeexplore.ieee.org/document/5444450/ SN - 978-1-4244-3877-8 U6 - https://doi.org/10.1109/TIC-STH.2009.5444450 SP - 497 EP - 502 PB - IEEE ER - TY - JOUR A1 - Ruess, Martin A1 - Schillinger, Dominik A1 - Bazilevs, Yuri A1 - Varduhn, Vasco A1 - Rank, Ernst T1 - Weakly enforced essential boundary conditions for NURBS-embedded and trimmed NURBS geometries on the basis of the finite cell method JF - International Journal for Numerical Methods in Engineering Y1 - 2013 U6 - https://doi.org/10.1002/nme.4522 SN - 1097-0207 VL - 95 IS - 10 SP - 811 EP - 846 PB - Wiley ER - TY - JOUR A1 - Schillinger, Dominik A1 - Ruess, Martin A1 - Zander, Nils A1 - Bazilevs, Yuri A1 - Düster, Alexander A1 - Rank, Ernst T1 - Small and large deformation analysis with the p- and B-spline versions of the Finite Cell Method JF - Computational Mechanics Y1 - 2012 U6 - https://doi.org/10.1007/S00466-012-0684-Z SN - 1432-0924 VL - 50 IS - 4 SP - 445 EP - 478 PB - Springer ER - TY - JOUR A1 - Ruess, Martin A1 - Tal, David A1 - Trabelsi, Nir A1 - Yosibash, Zohar A1 - Rank, Ernst T1 - The finite cell method for bone simulations: verification and validation JF - Biomechanics and modeling in mechanobiology Y1 - 2012 UR - http://www.ncbi.nlm.nih.gov/pubmed/21695444 U6 - https://doi.org/10.1007/s10237-011-0322-2 SN - 1617-7940 VL - 11 IS - 3-4 SP - 425 EP - 437 PB - Springer ER - TY - JOUR A1 - Ruess, Martin A1 - Schillinger, Dominik A1 - Özcan, Ali I. A1 - Rank, Ernst T1 - Weak coupling for isogeometric analysis of non-matching and trimmed multi-patch geometries JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2014 U6 - https://doi.org/10.1016/j.cma.2013.10.009 SN - 0045-7825 VL - 269 SP - 46 EP - 71 PB - Elsevier ER - TY - JOUR A1 - Rank, Ernst A1 - Ruess, Martin A1 - Kollmannsberger, Stefan A1 - Schillinger, Dominik A1 - Düster, Alexander T1 - Geometric modeling, isogeometric analysis and the finite cell method JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2012 U6 - https://doi.org/10.1016/j.cma.2012.05.022 SN - 0045-7825 VL - 249-252 SP - 104 EP - 115 PB - Elsevier ER - TY - JOUR A1 - Yang, Z. A1 - Ruess, Martin A1 - Kollmannsberger, Stefan A1 - Düster, Alexander A1 - Rank, Ernst T1 - An efficient integration technique for the voxel-based finite cell method JF - International Journal for Numerical Methods in Engineering Y1 - 2012 U6 - https://doi.org/10.1002/nme.4269 SN - 1097-0207 VL - 91 IS - 5 SP - 457 EP - 471 PB - Wiley ER - TY - JOUR A1 - Kollmannsberger, Stefan A1 - Özcan, Ali I. A1 - Baiges, J. A1 - Ruess, Martin A1 - Rank, Ernst A1 - Reali, A. T1 - Parameter-free, weak imposition of Dirichlet boundary conditions and coupling of trimmed and non-conforming patches JF - International Journal for Numerical Methods in Engineering Y1 - 2015 U6 - https://doi.org/10.1002/nme.4817 SN - 1097-0207 VL - 101 IS - 9 SP - 670 EP - 699 PB - Wiley ER - TY - CHAP A1 - Guo, Yujie A1 - Ruess, Martin T1 - Isogeometric Weak Coupling of Shell Structures T2 - 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2015, Kissimmee, Florida, USA, 5 - 9 January 2015 Y1 - 2015 UR - https://arc.aiaa.org/doi/book/10.2514/MSDM15 SN - 978-1-62410-342-1 U6 - https://doi.org/10.2514/6.2015-0965 SP - 1 EP - 14 PB - Curran CY - Red Hook ER - TY - JOUR A1 - Schillinger, Dominik A1 - Ruess, Martin T1 - The Finite Cell Method: A Review in the Context of Higher-Order Structural Analysis of CAD and Image-Based Geometric Models JF - Archives of Computational Methods in Engineering Y1 - 2015 U6 - https://doi.org/10.1007/s11831-014-9115-y SN - 1886-1784 VL - 22 IS - 3 SP - 391 EP - 455 PB - Springer ER - TY - JOUR A1 - Liang, Ke A1 - Ruess, Martin A1 - Abdalla, Mostafa T1 - The Koiter–Newton approach using von Kármán kinematics for buckling analyses of imperfection sensitive structures JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2014 U6 - https://doi.org/10.1016/j.cma.2014.07.008 SN - 0045-7825 VL - 279 SP - 440 EP - 468 PB - Elsevier ER - TY - JOUR A1 - Liang, Ke A1 - Zhang, YongJie A1 - Sun, Qin A1 - Ruess, Martin T1 - A new robust design for imperfection sensitive stiffened cylinders used in aerospace engineering JF - Science China Technological Sciences KW - peer Y1 - 2015 U6 - https://doi.org/10.1007/s11431-015-5793-4 SN - 1869-1900 VL - 58 IS - 5 SP - 796 EP - 802 PB - Springer ER - TY - JOUR A1 - Guo, Yujie A1 - Ruess, Martin A1 - Gürdal, Zafer T1 - A contact extended isogeometric layerwise approach for the buckling analysis of delaminated composites JF - Composite Structures Y1 - 2014 U6 - https://doi.org/10.1016/j.compstruct.2014.05.006 SN - 0263-8223 VL - 116 SP - 55 EP - 66 PB - Elsevier ER - TY - JOUR A1 - Guo, Yujie A1 - Ruess, Martin T1 - Nitsche’s method for a coupling of isogeometric thin shells and blended shell structures JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2015 U6 - https://doi.org/10.1016/j.cma.2014.11.014 SN - 0045-7825 VL - 284 SP - 881 EP - 905 PB - Elsevier ER - TY - JOUR A1 - Guo, Yujie A1 - Ruess, Martin T1 - A layerwise isogeometric approach for NURBS-derived laminate composite shells JF - Composite Structures Y1 - 2015 U6 - https://doi.org/10.1016/j.compstruct.2015.01.012 SN - 0263-8223 VL - 124 SP - 300 EP - 309 PB - Elsevier ER - TY - JOUR A1 - Wille, Hagen A1 - Ruess, Martin A1 - Rank, Ernst A1 - Yosibash, Zohar T1 - Uncertainty quantification for personalized analyses of human proximal femurs JF - Journal of Biomechanics N2 - Computational models for the personalized analysis of human femurs contain uncertainties in bone material properties and loads, which affect the simulation results. To quantify the influence we developed a probabilistic framework based on polynomial chaos (PC) that propagates stochastic input variables through any computational model. We considered a stochastic E-ρ relationship and a stochastic hip contact force, representing realistic variability of experimental data. Their influence on the prediction of principal strains (ϵ1 and ϵ3) was quantified for one human proximal femur, including sensitivity and reliability analysis. Large variabilities in the principal strain predictions were found in the cortical shell of the femoral neck, with coefficients of variation of ≈40%. Between 60 and 80% of the variance in ϵ1 and ϵ3 are attributable to the uncertainty in the E-ρ relationship, while ≈10% are caused by the load magnitude and 5-30% by the load direction. Principal strain directions were unaffected by material and loading uncertainties. The antero-superior and medial inferior sides of the neck exhibited the largest probabilities for tensile and compression failure, however all were very small (pf<0.001). In summary, uncertainty quantification with PC has been demonstrated to efficiently and accurately describe the influence of very different stochastic inputs, which increases the credibility and explanatory power of personalized analyses of human proximal femurs. Y1 - 2016 UR - http://www.ncbi.nlm.nih.gov/pubmed/26873282 U6 - https://doi.org/10.1016/j.jbiomech.2015.11.013 SN - 0021-9290 VL - 49 IS - 4 SP - 520 EP - 527 PB - Elsevier ER - TY - CHAP A1 - Friedrich, Linus A1 - Ruess, Martin A1 - Schröder, Kai-Uwe T1 - Efficient and robust shell design of space launcher vehicle structures T2 - 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, San Diego, 4-8 January 2016 Y1 - 2016 UR - https://arc.aiaa.org/doi/book/10.2514/MSDM16 SN - 978-1-62410-392-6 U6 - https://doi.org/10.2514/6.2016-1973 SP - 1 EP - 18 PB - American Institute of Aeronautics and Astronautics CY - Reston ER - TY - JOUR A1 - Liang, Ke A1 - Ruess, Martin A1 - Abdalla, Mostafa T1 - An eigenanalysis-based bifurcation indicator proposed in the framework of a reduced-order modeling technique for non-linear structural analysis JF - International Journal of Non-Linear Mechanics Y1 - 2016 U6 - https://doi.org/10.1016/j.ijnonlinmec.2016.01.013 SN - 0020-7462 VL - 81 SP - 129 EP - 138 PB - Elsevier ER - TY - JOUR A1 - Friedrich, Linus A1 - Loosen, Simon A1 - Liang, Ke A1 - Ruess, Martin A1 - Bisagni, Chiara A1 - Schröder, Kai-Uwe T1 - Stacking sequence influence on imperfection sensitivity of cylindrical composite shells under axial compression JF - Composite Structures Y1 - 2015 U6 - https://doi.org/10.1016/j.compstruct.2015.08.132 SN - 0263-8223 VL - 134 SP - 750 EP - 761 PB - Elsevier ER - TY - JOUR A1 - Varduhn, Vasco A1 - Hsu, Ming-Chen A1 - Ruess, Martin A1 - Schillinger, Dominik T1 - The tetrahedral finite cell method: Higher-order immersogeometric analysis on adaptive non-boundary-fitted meshes JF - International Journal for Numerical Methods in Engineering Y1 - 2016 U6 - https://doi.org/10.1002/nme.5207 SN - 1097-0207 VL - 107 IS - 12 SP - 1054 EP - 1079 PB - Wiley ER - TY - JOUR A1 - Liang, Ke A1 - Ruess, Martin A1 - Abdalla, Mostafa T1 - Co-rotational finite element formulation used in the Koiter–Newton method for nonlinear buckling analyses JF - Finite Elements in Analysis and Design Y1 - 2016 U6 - https://doi.org/10.1016/j.finel.2016.03.006 SN - 0168-874X VL - 116 SP - 38 EP - 54 PB - Elsevier ER - TY - JOUR A1 - Zander, Nils A1 - Ruess, Martin A1 - Bog, Tino A1 - Kollmannsberger, Stefan A1 - Rank, Ernst T1 - Multi-level hp -adaptivity for cohesive fracture modeling JF - International Journal for Numerical Methods in Engineering Y1 - 2017 U6 - https://doi.org/10.1002/nme.5340 SN - 1097-0207 VL - 109 IS - 13 SP - 1723 EP - 1755 PB - Wiley ER - TY - JOUR A1 - Liang, Ke A1 - Ruess, Martin T1 - Nonlinear buckling analysis of the conical and cylindrical shells using the SGL strain based reduced order model and the PHC method JF - Aerospace Science and Technology Y1 - 2016 U6 - https://doi.org/10.1016/j.ast.2016.05.018 SN - 1270-9638 VL - 55 SP - 103 EP - 110 PB - Elsevier ER - TY - JOUR A1 - Nguyen, Lam H. A1 - Stoter, Stein K.F. A1 - Baum, Thomas A1 - Kirschke, Jan A1 - Ruess, Martin A1 - Yosibash, Zohar A1 - Schillinger, Dominik T1 - Phase-field boundary conditions for the voxel finite cell method: Surface-free stress analysis of CT-based bone structures JF - International Journal for Numerical Methods in Biomedical Engineering Y1 - 2017 UR - http://www.ncbi.nlm.nih.gov/pubmed/28294574 U6 - https://doi.org/10.1002/cnm.2880 SN - 2040-7947 VL - 33 IS - 12 PB - Wiley ER - TY - JOUR A1 - Nguyen, Lam H. A1 - Stoter, Stein K.F. A1 - Ruess, Martin A1 - Sanchez Uribe, Manuel A. A1 - Schillinger, Dominik T1 - The diffuse Nitsche method: Dirichlet constraints on phase-field boundaries JF - International Journal for Numerical Methods in Engineering Y1 - 2018 U6 - https://doi.org/10.1002/nme.5628 SN - 1097-0207 VL - 113 IS - 4 SP - 601 EP - 633 PB - Wiley ER - TY - JOUR A1 - Keshavanarayana, Pradeep A1 - Ruess, Martin A1 - de Borst, René T1 - On the monolithic and staggered solution of cell contractility and focal adhesion growth JF - International Journal for Numerical Methods in Biomedical Engineering Y1 - 2018 UR - http://www.ncbi.nlm.nih.gov/pubmed/30070031 U6 - https://doi.org/10.1002/cnm.3138 SN - 2040-7947 VL - 34 IS - 11 PB - Wiley ER - TY - JOUR A1 - Magisano, D. A1 - Liang, Ke A1 - Garcea, G. A1 - Leonetti, L. A1 - Ruess, Martin T1 - An efficient mixed variational reduced-order model formulation for nonlinear analyses of elastic shells JF - International Journal for Numerical Methods in Engineering Y1 - 2018 U6 - https://doi.org/10.1002/nme.5629 SN - 1097-0207 VL - 113 IS - 4 SP - 634 EP - 655 PB - Wiley ER - TY - JOUR A1 - Guo, Yujie A1 - Zou, Zhihui A1 - Ruess, Martin T1 - Isogeometric multi-patch analyses for mixed thin shells in the framework of non-linear elasticity JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2021 U6 - https://doi.org/10.1016/j.cma.2021.113771 SN - 0045-7825 VL - 380 SP - 49 EP - 52 PB - Elsevier ER - TY - JOUR A1 - Guo, Yujie A1 - Ruess, Martin A1 - Schillinger, Dominik T1 - A parameter-free variational coupling approach for trimmed isogeometric thin shells JF - Computational Mechanics Y1 - 2017 U6 - https://doi.org/10.1007/s00466-016-1368-x SN - 1432-0924 VL - 59 IS - 4 SP - 693 EP - 715 PB - Springer ER - TY - JOUR A1 - Elhaddad, Mohamed A1 - Zander, Nils A1 - Bog, Tino A1 - Kudela, László A1 - Kollmannsberger, Stefan A1 - Kirschke, Jan A1 - Baum, Thomas A1 - Ruess, Martin A1 - Rank, Ernst T1 - Multi-level hp-finite cell method for embedded interface problems with application in biomechanics JF - International Journal for Numerical Methods in Biomedical Engineering N2 - This work presents a numerical discretization technique for solving 3-dimensional material interface problems involving complex geometry without conforming mesh generation. The finite cell method (FCM), which is a high-order fictitious domain approach, is used for the numerical approximation of the solution without a boundary-conforming mesh. Weak discontinuities at material interfaces are resolved by using separate FCM meshes for each material sub-domain and weakly enforcing the interface conditions between the different meshes. Additionally, a recently developed hierarchical hp-refinement scheme is used to locally refine the FCM meshes to resolve singularities and local solution features at the interfaces. Thereby, higher convergence rates are achievable for nonsmooth problems. A series of numerical experiments with 2- and 3-dimensional benchmark problems is presented, showing that the proposed hp-refinement scheme in conjunction with the weak enforcement of the interface conditions leads to a significant improvement of the convergence rates, even in the presence of singularities. Finally, the proposed technique is applied to simulate a vertebra-implant model. The application showcases the method's potential as an accurate simulation tool for biomechanical problems involving complex geometry, and it demonstrates its flexibility in dealing with different types of geometric description. Y1 - 2018 UR - http://www.ncbi.nlm.nih.gov/pubmed/29265715 U6 - https://doi.org/10.1002/cnm.2951 SN - 2040-7947 VL - 34 IS - 4 PB - Wiley ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Escudier, Marcel A1 - Nahavandi, Ali A1 - Nickson, A. K. A1 - Syed, Khawar J. A1 - Joos, Franz T1 - Experimental and numerical investigation of isothermal flow in an idealized swirl combustor JF - International Journal of Numerical Methods for Heat & Fluid Flow Y1 - 2010 U6 - https://doi.org/10.1108/09615531011024084 VL - 20 IS - 3 SP - 348 EP - 370 PB - Emerald ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Epple, B. A1 - Krohmer, B. T1 - Modelling of pulverised coal combustion by a Eulerian-Eulerian two-phase flow formulation JF - Progress in Computational Fluid Dynamics, An International Journal Y1 - 2005 U6 - https://doi.org/10.1504/pcfd.2005.007067 VL - 5 IS - 6 PB - inderscience ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Nahavandi, A. A1 - Syed, K. J. T1 - URANS and LES analysis of turbulent swirling flows JF - Progress in Computational Fluid Dynamics, An International Journal Y1 - 2005 U6 - https://doi.org/10.1504/pcfd.2005.007680 VL - 5 IS - 8 PB - inderscience ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Ozkan, K. A1 - Cagan, M. A1 - Gunes, D. T1 - Computational investigation of turbulent jet impinging onto rotating disk JF - International Journal of Numerical Methods for Heat & Fluid Flow Y1 - 2007 U6 - https://doi.org/10.1108/09615530710730157 VL - 17 IS - 3 SP - 284 EP - 301 PB - Emerald ER - TY - JOUR A1 - Stuhlsatz, André A1 - Lippel, Jens A1 - Zielke, Thomas T1 - Feature extraction with deep neural networks by a generalized discriminant analysis JF - IEEE transactions on neural networks and learning systems N2 - We present an approach to feature extraction that is a generalization of the classical linear discriminant analysis (LDA) on the basis of deep neural networks (DNNs). As for LDA, discriminative features generated from independent Gaussian class conditionals are assumed. This modeling has the advantages that the intrinsic dimensionality of the feature space is bounded by the number of classes and that the optimal discriminant function is linear. Unfortunately, linear transformations are insufficient to extract optimal discriminative features from arbitrarily distributed raw measurements. The generalized discriminant analysis (GerDA) proposed in this paper uses nonlinear transformations that are learnt by DNNs in a semisupervised fashion. We show that the feature extraction based on our approach displays excellent performance on real-world recognition and detection tasks, such as handwritten digit recognition and face detection. In a series of experiments, we evaluate GerDA features with respect to dimensionality reduction, visualization, classification, and detection. Moreover, we show that GerDA DNNs can preprocess truly high-dimensional input data to low-dimensional representations that facilitate accurate predictions even if simple linear predictors or measures of similarity are used. Y1 - 2012 U6 - https://doi.org/10.1109/tnnls.2012.2183645 VL - 23 IS - 4 SP - 596 EP - 608 PB - IEEE ER - TY - JOUR A1 - Maqableh, A. M. A1 - Khadrawi, A. F. A1 - Nimr, M. AlA. A1 - Ammourah, S. A. A1 - Benim, Ali Cemal T1 - Heat transfer characteristics of parallel and counter flow micro-channel heat exchangers with varying wall resistance JF - Progress in Computational Fluid Dynamics, An International Journal Y1 - 2011 U6 - https://doi.org/10.1504/pcfd.2011.042183 VL - 11 IS - 5 PB - inderscience ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Escudier, M. P. A1 - Nahavandi, A. A1 - Nickson, A. K. A1 - Syed, K. J. A1 - Joos, F. T1 - Computational analysis of incompressible turbulent flow in an idealised swirl combustor JF - Progess in Computational Fluid Dynamics, An International Journal Y1 - 2011 U6 - https://doi.org/10.1504/pcfd.2011.037571 VL - 11 IS - 1 SP - 42 EP - 45 PB - inderscience ER - TY - JOUR A1 - Winkler, Michael A1 - Becker, Klaus A1 - Doolan, Con A1 - Kameier, Frank A1 - Paschereit, Christian Oliver T1 - Aeroacoustic Effects of a Cylinder-Plate Configuration JF - AIAA Journal Y1 - 2012 U6 - https://doi.org/10.2514/1.j051578 VL - 50 IS - 7 SP - 1614 EP - 1620 PB - ARC ER - TY - JOUR A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal T1 - Turbulent Heat Transfer Over a Moving Surface Due to Impinging Slot Jets JF - Journal of Heat Transfer Y1 - 2011 U6 - https://doi.org/10.1115/1.4004075 VL - 133 IS - 10 PB - ASME ER - TY - JOUR A1 - Aslan, Erman A1 - Nahavandi, A. A1 - Taymaz, I. A1 - Benim, Ali Cemal T1 - A note on modelling non-rectangular boundaries by the Lattice Boltzmann Method JF - Progress in Computational Fluid Dynamics, An International Journal Y1 - 2012 U6 - https://doi.org/10.1504/pcfd.2012.049815 VL - 12 IS - 6 SP - 433 EP - 438 PB - inderscience ER - TY - JOUR A1 - Maqableh, A. M. A1 - Ammourah, S. A. A1 - Khadrawi, A. F. A1 - Al-Nimr, M. A. A1 - Benim, Ali Cemal T1 - Hydrodynamics behaviour of a fluid flow in micro-venturi JF - Candian Journal of Physics Y1 - 2012 U6 - https://doi.org/10.1139/p11-145 VL - 90 IS - 1 SP - 83 EP - 89 PB - Canadian Science Publishing ER - TY - JOUR A1 - Anders, Denis A1 - Weinberg, Kerstin A1 - Reichardt, Roland T1 - Isogeometric analysis of thermal diffusion in binary blends JF - Computational Materials Science Y1 - 2012 U6 - https://doi.org/10.1016/j.commatsci.2011.01.008 VL - 52 IS - 1 SP - 182 EP - 188 PB - Elsevier ER - TY - JOUR A1 - Joly, P. A1 - Petrarca, M. A1 - Vogel, A. A1 - Pohl, T. A1 - Nagy, T. A1 - Jusforgues, Q. A1 - Simon, P. A1 - Kasparian, J. A1 - Weber, K. A1 - Wolf, J.-P. T1 - Laser-induced condensation by ultrashort laser pulses at 248 nm JF - Applied Physics Letters Y1 - 2013 U6 - https://doi.org/10.1063/1.4794416 VL - 102 IS - 9 PB - AIP ER - TY - JOUR A1 - Iqbal, Sohail A1 - Benim, Ali Cemal A1 - Fischer, S. A1 - Joos, F. A1 - Kluβ, D. A1 - Wiedermann, Alexander T1 - Experimental and numerical analysis of natural bio and syngas swirl flames in a model gas turbine combustor JF - Journal of Thermal Science Y1 - 2016 U6 - https://doi.org/10.1007/s11630-016-0885-4 VL - 25 IS - 5 SP - 460 EP - 469 PB - Springer ER - TY - JOUR A1 - Aslan, Erman A1 - Taymaz, Imdat A1 - Benim, Ali Cemal T1 - Investigation of LBM curved boundary treatments for unsteady flows JF - European Journal of Mechanics - B/Fluids Y1 - 2015 U6 - https://doi.org/10.1016/j.euromechflu.2015.01.004 VL - 51 SP - 68 EP - 74 PB - Elsevier ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - A Finite Volume Analysis of Thermoelectric Generators JF - Heat Transfer Engineering Y1 - 2019 U6 - https://doi.org/10.1080/01457632.2018.1474588 SN - 0145-7632 SN - 1521-0537 VL - 40 IS - 17-18 SP - 1442 EP - 1450 PB - Taylor & Francis ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael A1 - Gül, Fethi A1 - Oclon, Pawel A1 - Taler, Jan T1 - Computational and experimental investigation of the aerodynamics and aeroacoustics of a small wind turbine with quasi-3D optimization JF - Energy Conversion and Management Y1 - 2018 U6 - https://doi.org/10.1016/j.enconman.2018.09.042 VL - 177 SP - 143 EP - 149 PB - Elsevier ER - TY - JOUR A1 - Guo, Y. A1 - Do, H. A1 - Ruess, Martin T1 - Isogeometric stability analysis of thin shells: From simple geometries to engineering models JF - International Journal for Numerical Methods in Engineering Y1 - 2019 U6 - https://doi.org/10.1002/nme.6020 SN - 1097-0207 VL - 118 IS - 8 SP - 433 EP - 458 PB - Wiley ER - TY - JOUR A1 - Biedermann, Till M. A1 - Czeckay, Pasquale A1 - Geyer, Thomas F. A1 - Kameier, Frank A1 - Paschereit, Christian O. T1 - Effect of Inflow Conditions on the Noise Reduction Through Leading Edge Serrations JF - AIAA Journal Y1 - 2019 U6 - https://doi.org/10.2514/1.j057831 SN - 1533-385X VL - 57 IS - 9 SP - 4104 EP - 4109 PB - ARC ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn A1 - Ocłoń, Paweł A1 - Taler, Jan T1 - Computational investigation of a lifted hydrogen flame with LES and FGM JF - Energy Y1 - 2019 U6 - https://doi.org/10.1016/j.energy.2019.02.133 SN - 0360-5442 VL - 173 SP - 1172 EP - 1181 PB - Elsevier ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - Computational Investigation of Impingement Cooling of Thermoelectric Generators JF - Heat Transfer Engineering Y1 - 2021 U6 - https://doi.org/10.1080/01457632.2019.1699296 SN - 0145-7632 VL - 42 IS - 3-4 SP - 282 EP - 295 PB - Taylor & Francis ER - TY - JOUR A1 - Kameier, Frank A1 - Wagner, Thomas A1 - Horvat, Igor A1 - Ullrich, Frank T1 - Experimentelle und numerische Untersuchung zur Strömungsakustik einer Staulippe JF - ATZ Automobiltech Zeitschrift Y1 - 2009 U6 - https://doi.org/10.1007/bf03222094 VL - 111 IS - 7-8 SP - 562 EP - 567 PB - Springer ER - TY - JOUR A1 - Kameier, Frank A1 - Wagner, Thomas A1 - Horvat, Igor A1 - Ullrich, Frank T1 - Experimental and numerical investigation of air dam aeroacoustics JF - ATZ worldwide Y1 - 2009 U6 - https://doi.org/10.1007/bf03225090 VL - 111 IS - 7-8 SP - 54 EP - 59 PB - Springer ER - TY - JOUR A1 - Carapezza, M. L. A1 - Barberi, F. A1 - Ranaldi, M. A1 - Ricci, T. A1 - Tarchini, L. A1 - Barrancos, J. A1 - Fischer, C. A1 - Perez, N. A1 - Weber, Konradin A1 - Di Piazza, A. A1 - Gattuso, A. T1 - Diffuse CO2 soil degassing and CO2 and H2S concentrations in air and related hazards at Vulcano Island (Aeolian arc, Italy) JF - Journal of Volcanology and Geothermal Research Y1 - 2011 U6 - https://doi.org/10.1016/j.jvolgeores.2011.06.010 VL - 207 IS - 3-4 SP - 130 EP - 144 PB - Elsevier ER - TY - JOUR A1 - Wolf, Christian A1 - Gaida, Daniel A1 - Stuhlsatz, André A1 - Ludwig, Thomas A1 - McLoone, Seán A1 - Bongards, Michael T1 - Predicting organic acid concentration from UV/vis spectrometry measurements – a comparison of machine learning techniques JF - Transactions of the Institute of Measurement and Control Y1 - 2013 U6 - https://doi.org/10.1177/0142331211403797 VL - 35 IS - 1 SP - 5 EP - 15 PB - sage journals ER - TY - JOUR A1 - Fleiger, P. M. A1 - Reichardt, Roland A1 - Treiber, K. T1 - High-Precision Power Measurement for the Grindability Test According to Zeisel JF - Chemical Engineering & Technology Y1 - 2012 U6 - https://doi.org/10.1002/ceat.201200118 VL - 35 IS - 11 SP - 1941 EP - 1948 PB - Wiley ER - TY - JOUR A1 - Gaida, Philipp A1 - Weinberg, Kerstin A1 - Jahr, Andreas T1 - Viscoelastic modelling and experimental results of a dielectric electro-active polymer diaphragm actuator JF - Proceedings in Applied Mathematics and Mechanics (PAMM) Y1 - 2014 U6 - https://doi.org/10.1002/pamm.201410225 VL - 14 IS - 1 SP - 475 EP - 476 PB - Wiley ER - TY - JOUR A1 - Biedermann, Till M. A1 - Kameier, F. A1 - Paschereit, C. O. T1 - Successive Aeroacoustic Transfer of Leading Edge Serrations From Single Airfoil to Low-Pressure Fan Application JF - Journal of Engineering for Gas Turbines and Power KW - ISAVE Y1 - 2019 U6 - https://doi.org/10.1115/1.4044362 VL - 141 IS - 10 PB - ASME ER - TY - JOUR A1 - Biedermann, Till M. A1 - Reich, M. A1 - Paschereit, C. O. T1 - Multi-Objective Modeling of Leading-Edge Serrations Applied to Low-Pressure Axial Fans JF - Journal of Engineering for Gas Turbines and Power Y1 - 2020 UR - https://doi.org/10.1115/1.4048599 U6 - https://doi.org/10.1115/1.4048599 VL - 142 IS - 11 PB - ASME ER - TY - CHAP A1 - Müller, Benedikt A1 - Adam, Mario T1 - Multikriterielle Auslegung Deutschlands bislang größter solarthermischen Anlage zur Integration in ein Bestandsfernwärmenetz T2 - RET-Con – 5. Regenerative Energietechnik Konferenz, 10. - 11. Februar 2022, Nordhausen KW - Sol-FWK Y1 - 2022 CY - Neuhausen ER - TY - CHAP A1 - Winnitzki, Michael A1 - Spiegel, Thomas A1 - Adam, Mario T1 - Ansätze des maschinellen Lernens für die Prognose des Strombedarfes von Ortsnetzstationen als Beitrag für Steuerungsaufgaben in der Niederspannung. Postersession T2 - Innovationen im Verteilernetz: ETG-CIRED-Workshop 2021 (D-A-CH) 02.-03.11.2021, München KW - Windheizung 2.0 KW - ZIES Y1 - 2021 CY - München ER - TY - JOUR A1 - Deniz Canal, Cansu A1 - Boke, Yakup Erhan A1 - Aydin, Ozer A1 - Benim, Ali Cemal T1 - COMPUTATIONAL ANALYSIS OF PULVERIZED COAL CO-FIRING WITH BIOMASS IN 150MWe UNIT OF TUNCBILEK THERMAL POWER PLANT JF - Isi Bilimi ve Teknigi Dergisi - Journal of Thermal Science and Technology Y1 - 2021 U6 - https://doi.org/10.47480/isibted.979314 SN - 1300-3615 VL - 41 IS - 1 SP - 37 EP - 50 ER - TY - GEN ED - Deckert, Carsten T1 - CSR und Logistik: Spannungsfelder Green Logistics und City-Logistik Y1 - 2021 SN - 978-3-662-63569-8 U6 - https://doi.org/10.1007/978-3-662-63570-4 VL - Management-Reihe Corporate Social Responsibility PB - Springer CY - Berlin, Heidelberg ET - 2., überarb. Aufl. ER - TY - CHAP A1 - Deckert, Carsten A1 - Mohya, Ahmed ED - Deckert, Carsten T1 - Nachhaltige Lagerung: Vom Lagerbau bis zum Lagerbetrieb T2 - CSR und Logistik: Spannungsfelder Green Logistics und City-Logistik Y1 - 2021 U6 - https://doi.org/10.1007/978-3-662-63570-4_7 VL - Management-Reihe Corporate Social Responsibility SP - 149 EP - 167 PB - Springer CY - Berlin, Heidelberg ET - 2., überarb. Aufl. ER - TY - CHAP A1 - Goebel, Johannes A1 - Kowalski, Marek A1 - Frank, Lena A1 - Adam, Mario T1 - Rechnersimulationen Zum Winter- Und Sommerbetrieb Einer Abwasser-Gaswärmepumpe/- Kältemaschine T2 - Deutsche Kaelte-und Klimatagung 2016, 16 - 18 November 2016, Kassel Kassel KW - Abwasser-Gas-WP/KM Y1 - 2017 SN - 978-1-5108-3656-3 N1 - ÖffentlichInhaltsverzeichnis: proceedings.com/content/033/033625webtoc.pdf SP - 440 EP - 458 PB - Deutscher Kalte- und Klimatechnisher Verein (DKV) CY - Hannover ER - TY - CHAP A1 - Prusas, Benedik T1 - Simulation of Germany’s security of supply: long-term forecasting of electric load profiles using machine learning. T2 - ENERDAY 2022 - 16th international conference of energy economics and technology, 30.9.2022, Dresden KW - KiVi KW - Vortrag Y1 - 2022 PB - Technische Universität Dresden CY - Dresden ER - TY - CHAP A1 - Gottschald, Jonas A1 - Adam, Mario A1 - Reich, Marius T1 - Multi-Objective Optimization of a District Heating Networks Energy Supply Systems Structure and Dimension T2 - SDH - 5th International Solar District Heating Conference, 11.-12.04.2018, Graz / Austria KW - Fast-Energy-Design Y1 - 2018 UR - https://www.researchgate.net/publication/325896757_Robust_Optimization_of_District_Heating_Networks_Structure_and_Dimension_combining_Metamodels_and_Multi-Objective_Optimization CY - Graz ER - TY - CHAP A1 - Biedermann, Till M. A1 - Reich, Marius A1 - Kameier, Frank A1 - Adam, Mario A1 - Paschereit, C. T1 - Assessment of Statistical Sampling Methods and Approximation Models Applied to Aeroacoustic and Vibroacoustic Problem T2 - NOVEM - 6th conference on Noise and Vibration emerging methods, 07.-09.05.2018, Ibiza / Spain Y1 - 2018 CY - Ibiza ER - TY - CHAP A1 - Gottschald, Jonas A1 - Reich, Marius A1 - Adam, Mario A1 - Leibauer, R. T1 - Selbstlernende Betriebsoptimierung einer hybriden Nahwärmeversorgung T2 - Fachkonferenz Digitalisieren - Sektoren koppeln - Flexibilisieren, 24.11.2020, Berlin KW - BestHeatNet Y1 - 2020 CY - Berlin ER - TY - JOUR A1 - Deckert, Carsten T1 - Wissensqualität - Über Nichtwissen, Falschwissen und Halbwissen JF - SEM-Radar Y1 - 2007 VL - 6 IS - 1 SP - 3 EP - 26 ER - TY - JOUR A1 - Ebling, Dirk A1 - Krumm, A. A1 - Pfeiffelmann, Björn A1 - Gottschald, J. A1 - Bruchmann, J. A1 - Benim, Ali Cemal A1 - Adam, Mario A1 - Labs, R. A1 - Herbertz, R. R. A1 - Stunz, A. T1 - Development of a System for Thermoelectric Heat Recovery from Stationary Industrial Processes JF - Journal of Electronic Materials KW - heat recovery KW - Thermoelectric generation KW - thermoelectric generation system KW - waste heat KW - EnerTEG Y1 - 2016 U6 - https://doi.org/10.1007/s11664-016-4511-8 N1 - The authors acknowledge financial support from the Ministry of Economic Affairs and Energy of the State of North Rhine-Westphalia, Germany and the European Commission from the European Regional Development Fund. VL - 45 IS - 7 SP - 3433 EP - 3439 PB - Springer ER - TY - JOUR A1 - Rödder, Maximilian A1 - Frank, Lena A1 - Kirschner, Daniel A1 - Neef, Matthias A1 - Adam, Mario T1 - EnergiBUS4home – Sustainable energy resourcing in low-energy buildings JF - Energy KW - energiBUS4home Y1 - 2018 U6 - https://doi.org/10.1016/j.energy.2018.06.145 N1 - PII: S0360544218312106 VL - 159 SP - 638 EP - 647 PB - Elsevier ER - TY - CHAP A1 - Reich, Marius A1 - Adam, Mario A1 - Gottschald, Jonas T1 - Robust Optimization of District Heating Networks Structure and Dimension combining Metamodels and Multi-Objective Optimization T2 - ECOS - 31th International Conference on Efficiency, Cost, Optimization, Simulation and Enviromental Impact of Energy Systems, 17.-21.06.2018, Guimaraes / Portugal KW - EnergyExpert Y1 - 2018 UR - https://www.researchgate.net/publication/325896757_Robust_Optimization_of_District_Heating_Networks_Structure_and_Dimension_combining_Metamodels_and_Multi-Objective_Optimization CY - Guimaraes ER - TY - CHAP A1 - Ille, Fabian A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Wirth, Hans Peter T1 - Analysis of Ageing Phenomena for Big Solar Thermal Plants T2 - ECOS - 31th International Conference on Efficiency, Cost, Optimization, Simulation and Enviromental Impact of Energy Systems, 17.-21.06.2018, Guimaraes / Portugal KW - ST2000-LangEff Y1 - 2018 UR - https://www.researchgate.net/publication/326147054_Analysis_of_Ageing_Phenomena_for_Big_Solar_Thermal_Plants CY - Guimaraes ER - TY - CHAP A1 - Nolting, Lars A1 - Spiegel, Thomas A1 - Reich, Marius A1 - Adam, Mario A1 - Praktiknjo, Aaron T1 - Can Energy System Modeling benefit from Artificial Neural Networks? Application of Two-Stage Metamodels to Reduce Computation of Security of Supply Assessments (Best Application Paper Award) T2 - CIE – 48th International Conference on Computers & Industrial Engineering, 02.-05.12.2018, Auckland / New Zealand KW - KIVi Y1 - 2018 CY - Auckland ER - TY - CHAP A1 - Goebel, J. A1 - Kowalski, M. A1 - Frank, Lena A1 - Adam, Mario ED - Deutscher Kälte- und Klimatechnischer Verein, T1 - Hardware in the Loop Test eines optimiertem Winter- und Sommerbetriebs einer Abwasser-Gaswärmepumpe/-Kältemaschiene T2 - Deutsche Kaelte-und Klimatagung 2017 Bremen KW - Abwasser-Gas-WP/KM Y1 - 2017 SN - 978-1-5108-5823-7 SP - 1085 EP - 1097 PB - Curran Associates, Inc. CY - Red Hook ER - TY - CHAP A1 - Goebel, Johannes A1 - Frank, Lena A1 - Zielke, Thomas A1 - Becker, Martin A1 - Lippel, Jens ED - Deutscher Kälte- und Klimatechnischer Verein, T1 - Modellierung dynamischer Prozesse mit Deep Neural Networks am Beispiel einer Gas-Absorptionswärmepumpe T2 - Deutsche Kaelte-und Klimatagung 2017 Bremen KW - Abwasser-Gas-WP/KM KW - ZIES Y1 - 2017 SP - 1147 EP - 1160 PB - Curran Associates, Inc. CY - Red Hook ER - TY - CHAP A1 - Goebel, J. A1 - Kowalski, M. A1 - Adam, Mario ED - Holzhauer, Ralf ED - Obergassel, Cordula ED - Rehorek, Astrid T1 - Abwasser als Wärmequelle und -senke für Wärmepumpen - Auswahl von Typtagen für Test und Dimensionierung mit Hilfe von Cluster-Verfahren T2 - Ressourcen-Wissen: Hebung Ungenutzter Potenziale KW - Abwasser-Gas-WP/KM Y1 - 2017 SN - 9783981902808 PB - Graduierteninstitut NRW CY - Bochum ER - TY - CHAP A1 - Helbig, Sonja A1 - Eggert, Daniel A1 - Adam, Mario T1 - Einfluss von Speicheranschlusshöhen und geschichteter Speicherbe- und -entladung auf die Effizienz solarer Kombisysteme im Mehrfamilienhaus T2 - Symposium Thermische Solarenergie – Energiewende Wärme, 13.-15.06.2018, Bad Staffelstein KW - SUW-MFH Y1 - 2018 CY - Bad Staffelstein ER - TY - CHAP A1 - Spiegel, Thomas A1 - Backes, K. A1 - Adam, Mario A1 - Helbig, Sonja A1 - Eggert, Daniel T1 - Best-Practice-Lösungen für Mehrfamilienhäuser mit Solaranlage T2 - Symposium Thermische Solarenergie – Energiewende Wärme, 13.-15.06.2018, Bad Staffelstein KW - SUW-MFH Y1 - 2018 CY - Bad Staffelstein ER - TY - CHAP A1 - Helbig, Sonja A1 - Eggert, Daniel A1 - Adam, Mario ED - Romero, Manuel ED - Mugnier, Daniel ED - Renné, David ED - Guthrie, Ken ED - Griffiths, Steven T1 - Energetic and Economic Efficiency Evaluation of Solar Assisted Heating Systems for Multi-Family Houses T2 - Proceedings of SWC2017/SHC2017, 29.10.-02.11.2017, Abu Dhabi KW - SUW-MFH Y1 - 2017 UR - http://proceedings.ises.org/swc2017 SN - 978-3-9814659-7-6 U6 - https://doi.org/10.18086/swc.2017.29.04 SP - 1 EP - 10 PB - International Solar Energy Society CY - Freiburg ER - TY - CHAP A1 - Wirth, Hans Peter A1 - Adam, Mario A1 - Ille, Fabian A1 - Gottschald, Jonas ED - Ostbayerisches Technologie-Transfer-Institut e. V., T1 - Monitoring von solarthermischen Großanlagen aus den Monitoring von solarthermischen Großanlagen aus den FörderprogrammenSolarthermie-2000 und Solarthermie2000plus. Posterpräsentation T2 - 27. OTTI Symposium Thermische Solarenergie; Energiewende: Wärme, 10.-12.05.2017, Bad Staffelstein KW - ST2000-LangEff Y1 - 2017 ER - TY - CHAP A1 - Helbig, Sonja A1 - Mercker, Oliver A1 - Steinweg, J. A1 - Eggert, Daniel A1 - Herz, M. A1 - Adam, Mario ED - Ostbayerisches Technologie-Transfer-Institut e. V., T1 - Gesamtsystembewertung von solarunterstützten Wärmeversorgungskonzepten in Mehrfamilienhäusern - Effizienz gegenüber Wirtschaftlichkeit T2 - 27. OTTI Symposium Thermische Solarenergie; Energiewende: Wärme, 10.-12.05.2017, Bad Staffelstein KW - SUW-MFH Y1 - 2017 ER - TY - CHAP A1 - Reich, Marius A1 - Adam, Mario A1 - Lambach, Stefan T1 - Comparison of different Methods for Approximating Models of Energy Supply Systems and Polyoptimising the Systems-Structure and Components-Dimension T2 - 30th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems (ECOS 2017), San Diego, California, USA, 2-6 July 2017 KW - Fast-Energy-Design Y1 - 2018 SN - 9781510862562 SP - 2921 EP - 2933 PB - Curran Associates Inc CY - Red Hook, NY ER - TY - CHAP A1 - Adam, Mario A1 - Ille, Fabian A1 - Radosavljevic, Radojka A1 - Wirth, Hans Peter T1 - PVT-Solarkollektoren - Marktanalyse und Etrags-/Betriebssimulationen von Gesamtsystemen mit Wärmepumpen. Posterpräsentation T2 - 25. OTTI Symposium Thermische Solarenergie, 6.-8.05.2015, Bad Staffelstein KW - PVT-Norm Y1 - 2015 CY - Bad Staffelstein ER - TY - CHAP A1 - Rödder, Maximilian A1 - Frank, Lena A1 - Kirschner, Daniel A1 - Neef, Matthias A1 - Adam, Mario ED - The International Centre for Sustainable Development of Energy, Water and Environment Systems, T1 - EnergiBUS4home – Sustainable energy resourcing in low-energy buildings T2 - 12th Conference on Sustainable Development of Energy, Water and Environment Systems, 04.-08.10.2017, Dubrovnik KW - energiBUS4home Y1 - 2017 ER - TY - CHAP A1 - Adam, Mario A1 - Lohmann, Sandra T1 - Berechnungs- und Auslegungstool zur energieeffizienten Kühlung von Gebäuden (Coolplan). P5-28 T2 - EnOB-Symposium 2014: Energieinnovationen in Neubau und Sanierung: Neues aus der Forschung für mehr Energieeffizienz, Raumkomfort, Wirtschaftlichkeit und Nachhaltigkeit, 20.–21. März 2014, Essen, Zeche Zollverein KW - Coolplan Y1 - 2014 PB - Projektträger Jülich CY - Essen ER - TY - CHAP A1 - Spiegel, Thomas ED - The International Centre for Sustainable Development of Energy, Water and Environment Systems, T1 - Imbalance reduction of energy balancing groups as a means of renewable energy expansion - Optiosn for an active energy balancing group management T2 - 12th Conference on Sustainable Development of Energy, Water and Environment Systems, 04.-08.10.2017, Dubrovnik Y1 - 2017 ER - TY - CHAP A1 - Adam, Mario A1 - Walter, D. A1 - Backes, Klaus A1 - Steinweg, Jan T1 - Classification of Hydraulic Designs and Hardware-in-the-loop-Tests of Solar Assisted Heating Systems for Multi-Family Houses T2 - 2016 International Energy and Sustainability Conference (IESC), 30.06.-1.07.2016, Cologne KW - SUW-MFH Y1 - 2016 UR - https://doi.org/10.1109/IESC.2016.7569494 U6 - https://doi.org/10.1109/IESC.2016.7569494 SP - 1 EP - 6 PB - IEEE CY - Köln ER - TY - CHAP A1 - Steinweg, Jan A1 - Eggert, Daniel A1 - Rockendorf, G. A1 - Backes, Klaus A1 - Adam, Mario ED - Ostbayerisches Technologie-Transfer-Institut e.V., T1 - Leistungsbewertung und Optimierung von solar unterstützten Wärmezentralen in Mehrfamilienhäusern. Posterpräsentation T2 - 26. Symposium Thermische Solarenergie 2016, 20.-22.04.2016, Bad Staffelstein KW - SUW-MFH Y1 - 2016 CY - Bad Staffelstein ER - TY - CHAP A1 - Glembin, J. A1 - Adam, Mario A1 - Deidert, J. A1 - Jagnow, K. A1 - Rockendorf, G. A1 - Wirth, Hans Peter T1 - Vergleichende Untersuchung von Kesseleinbindungen in solarthermischen Kombianlagen. Posterbeitrag T2 - 22. OTTI Symposium Thermische Solarenergie KW - Kessel und große Solarthermieanlagen Y1 - 2012 ER - TY - CHAP A1 - Goebel, Johannes A1 - Frank, Lena A1 - Adam, Mario T1 - Heizen und Kühlen mittels Abwasser-Gaswärmepumpen/-Kältemaschinen T2 - Deutsche Kälte- und Klimatagung 2015, 18.-20.11.2015, Dresden KW - Abwasser-Gas-WP/KM Y1 - 2016 SN - 978-1-5108-1998-6 N1 - Inhaltsverzeichnis: https://www.proceedings.com/content/029/029687webtoc.pdf SP - 1190 EP - 1202 ER - TY - CHAP A1 - Backes, Klaus A1 - Ille, Fabian A1 - Adam, Mario T1 - Klassifizierung und Laborfeldtests solar unterstützter Wärmezentralen in Mehrfamilienhäusern. Posterpräsentation T2 - 26. Symposium Thermische Solarenergie 2016, 20.-22.04.2016, Bad Staffelstein KW - SUW-MFH Y1 - 2016 ER - TY - CHAP A1 - Anthrakidis, Anette A1 - Faber, Christian A1 - Krokerm M, A1 - Lanz, Marco A1 - Backes, Klaus A1 - Adam, Mario A1 - Dreher, Martina A1 - Schramm, Sebastian T1 - Solare Prozesswärmestandards - Konzeptionierung, Aufbau und wissenschaftliche Begleitung einer Pilotanlage T2 - 20. OTTI Symposium Thermische Solarenergie, 05.-07.05.2010, Bad Staffelstein KW - Solare-Prozesswärme-Standards Y1 - 2010 CY - Bad Staffelstein ER - TY - CHAP A1 - Ille, Fabian A1 - Adam, Mario A1 - Schramm, Sebastian A1 - Backes, Klaus A1 - Faber, Christian A1 - Anthrakidis, Anette T1 - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW mit periodisch arbeitender Sorptionsmaschine T2 - Deutsche Kälte-Klima-Tagung 2008, 20.-21.11.2008, Ulm KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW Y1 - 2008 CY - Ulm ER - TY - CHAP A1 - Backes, Klaus A1 - Faber, Christian A1 - Anthrakidis, Anette A1 - Ille, Fabian A1 - Adam, Mario A1 - Schramm, Sebastian T1 - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW mit periodisch arbeitender Sorptionsmaschine T2 - World Sustainable Energy Days 2008, 5-7. März, Wels KW - Solare-Prozesswärme-Standards Y1 - 2008 CY - Wels ER - TY - CHAP A1 - Backes, Klaus A1 - Faber, Christian A1 - Anthrakidis, Anette A1 - Ille, Fabian A1 - Adam, Mario A1 - Schramm, Sebastian ED - WREN, T1 - A small scale Combined Cooling, Heating and Power System T2 - World Renewable Energy Congress X and Exhibition, 19-25.07.2008, Glasgow KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW Y1 - 2008 CY - Glasgow ER - TY - CHAP A1 - Lohmann, Sandra A1 - Ille, Fabian A1 - Adam, Mario T1 - Solar cooling in a hardware-in-the-loop test and pilot plant. Postersession A1 T2 - 5th International Conference Solar Air-Conditioning, 25.-27.09.2013, Bad Krozingen KW - Solare Kühlung Y1 - 2013 SN - 978-3-943891-21-8 ER - TY - CHAP A1 - Lohmann, Sandra A1 - Thesing, M. A1 - Adam, Mario T1 - Solare Kühlung – Dynamische Rechnersimulationen und DoE-unterstützte Parametervariationen T2 - Deutsche Kälte-Klima-Tagung 2010, 17.-19.11.2010, Magdeburg KW - Solare Kühlung Y1 - 2010 SN - 978-1-61782-341-1 VL - 3 SP - 685 EP - 711 CY - Magdeburg ER - TY - CHAP A1 - Lohmann, Sandra A1 - Radosavljevic, Radojka A1 - Gottschald, Jonas A1 - Adam, Mario A1 - Goebel, Johannes T1 - Solare Kühlung im Hardware-in-the-Loop-Test T2 - Deutsche Kälte-Klima-Tagung 2012, 21.-23.11.2012, Würzburg KW - FBMV KW - Solare Kühlung KW - ZIES Y1 - 2012 ER - TY - CHAP A1 - Adam, Mario A1 - Dreher, Martina A1 - Schramm, Sebastian A1 - Anthrakidis, Anette A1 - Faber, Christian A1 - Lanz, Marco T1 - Solare-ProzesswärmeStandards. Poster Session T2 - World Sustainable Energy Days 2011, 2.-4. März, Wels KW - Solare-Prozesswärme-Standards KW - Poster Y1 - 2011 CY - Wels ER - TY - CHAP A1 - Schramm, Sebastian T1 - Hydraulische Einbindung von Speichern in Solare Prozesswärmesysteme: Posterbeitrag T2 - 22. OTTI Symposium Thermische Solarenergie KW - Solare-Prozesswärme-Standards Y1 - 2012 ER - TY - CHAP A1 - Schramm, Sebastian A1 - Adam, Mario A1 - Backes, Klaus A1 - Ille, Fabian A1 - Faber, Christian A1 - Anthrakidis, Anette T1 - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW mit periodisch arbeitender Sorptionsmaschine T2 - VDI-Tage der Gebäudetechnik 2008: Tagung Dortmund, 28.-29. Mai 2008 KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW Y1 - 2008 SN - 9783180920436 VL - VDI-Berichte, 2043 SP - 103 EP - 116 PB - VDI-Verl. CY - Düsseldorf ER - TY - GEN A1 - Lambach, Stefan A1 - Kowalski, M. A1 - Reich, Marius A1 - Adam, Mario T1 - Vermessung und Modellierung eines Komfort-Lüftungsgerätes mit passiver Wärmerückgewinnung und aktiver, umschaltbarer Luft/Luft-Wärmepumpe im Kühlbetrieb T2 - KI Kälte Luft Klimatechnik KW - Coolplan-AIR Y1 - 2020 SN - 1865-5432 VL - 56 IS - 10 SP - 48 EP - 55 PB - Hüthig ER - TY - GEN A1 - Gottschald, Jonas A1 - Leibauer, Rüdiger T1 - Energiezentrale mit Weitblick - Künstliche Intelligenz in der Quartiersversorgung T2 - emw - Energie. Markt. Wettbewerb KW - BestHeatNet Y1 - 2021 UR - https://www.emw-online.com/artikel/209237/energiezentrale-mit-weitblick SN - 1611-2997 VL - 1 IS - 1 PB - Energate ER - TY - GEN A1 - Frank, Lena A1 - Rödder, Maximilian A1 - Neef, Matthias A1 - Adam, Mario T1 - Heizung, Lüftung, Weiße Ware – Ein integriertes Systemkonzept für das Haus der Zukunft T2 - KKA – Kälte Klima Aktuell KW - energiBUS4home Y1 - 2018 SN - 0722-4605 VL - 37 IS - 4 SP - 42 EP - 47 PB - Bauverl. BV ER - TY - GEN A1 - Lambach, Stefan A1 - Lohmann, Sandra A1 - Adam, Mario T1 - Jahres-Energieeffizienz von Kühlgeräten zur Klimatisierung – Vergleich von Normberechnung und Jahressimulationen, T2 - KI Kälte Luft Klimatechnik KW - Coolplan-AIR Y1 - 2018 VL - 54 IS - 5 SP - 50 EP - 55 PB - Hüthig ER - TY - GEN A1 - Frank, Lena A1 - Rödder, Maximilian A1 - Neef, Matthias A1 - Adam, Mario T1 - energiBUS4home – Integration von Haushaltsgeräten in ein multifunktionales Wärmepumpensystem T2 - KI Kälte Luft Klimatechnik KW - energiBUS4home Y1 - 2020 SN - 1865-5432 VL - 56 IS - 8/9 SP - 41 EP - 45 PB - Hüthig ER - TY - GEN A1 - Wirth, Hans Peter A1 - Gottschald, Jonas A1 - Ille, Fabian A1 - Adam, Mario T1 - Wärme: Gute Noten für Großanlagen. Betreiberbefragung Solarthermieanlagen T2 - Sonne, Wind & Wärme KW - ST2000-LangEff Y1 - 2017 SN - 1861-2741 VL - 41 IS - 1/2 SP - 90 EP - 91 PB - VDE Verlag ER - TY - GEN A1 - Adam, Mario A1 - Gottschald, Jonas T1 - Kempen wird zum Reallabor T2 - Stadt + Werk: Energiepolitik, Klimaschutz, Rekommunalisierung KW - BestHeatNet Y1 - 2019 SN - 2193-195X VL - 9 IS - 7/8 SP - 22 EP - 23 PB - K21 Media AG ER - TY - GEN A1 - de Carvalho, Raphael A1 - Heinze, Robert A1 - Ille, Fabian A1 - Adam, Mario A1 - Kameier, Frank A1 - Schauenberg, Udo T1 - Verbesserte energetische Prognose von air conomy Modulen. Vergleich zwischen Design of Experiments (DoE) und Dimensionsanalyse (Teil 1) T2 - HLH Lüftung/Klima, Heizung/Sanitär, Gebäudetechnik Y1 - 2012 VL - 63 IS - 8 SP - 24 EP - 28 PB - Springer VDI-Verlag ER - TY - GEN A1 - Backes, Klaus A1 - Adam, Mario A1 - Gottschald, Jonas T1 - KWKK-Anlagen im Feldtest. Optimaler Betrieb durch Verbesserungen bei Regelung und Hydraulik T2 - KK Die Kälte + Klimatechnik KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW - 2 Y1 - 2012 SN - 0343-2246 VL - 65 IS - 3 SP - 20 EP - 27 PB - Alfons W. Gentner Verlag ER - TY - GEN A1 - Wirth, Hans Peter A1 - Gottschald, Jonas A1 - Ille, Fabian A1 - Adam, Mario T1 - Wärme: Zuverlässige Kollektoren liefern hohe Solarerträge: Monitoring von Solarthermieanlagen T2 - Sonne, Wind & Wärme KW - ST2000-LangEff Y1 - 2017 UR - 1861-2741 VL - 41 IS - 4 SP - 81 EP - 83 PB - VDE Verlag ER - TY - GEN A1 - Gottschald, Jonas A1 - Adam, Mario A1 - Marx, H. T1 - Heiztechnik - Langzeitmessergebnisse eines vakuumisolierten Warmwasserspeichers T2 - HLH Heizung – Lüftung – Haustechnik KW - VakuTank Y1 - 2014 SN - 0017-9906 VL - 64 IS - 4 SP - 20 EP - 25 PB - VDI-Verlag ER - TY - GEN A1 - Backes, Klaus A1 - Adam, Mario T1 - KWKK-Anlagen im Feldtest (Teil 1) T2 - SHT Sanitär + Heizungstechnik KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW Y1 - 2012 SN - 0036-4401 VL - 77 IS - 3 SP - 40 EP - 44 PB - Krammer ER - TY - GEN A1 - Backes, Klaus A1 - Adam, Mario T1 - KWKK-Anlagen im Feldtest (Teil 2) T2 - SHT Sanitär + Heizungstechnik KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW Y1 - 2012 SN - 0036-4401 VL - 77 IS - 4 SP - 50 EP - 53 PB - Kramer ER - TY - GEN A1 - de Carvalho, Raphael A1 - Heinze, Robert A1 - Ille, Fabian A1 - Adam, Mario A1 - Kameier, Frank A1 - Schauenberg, Udo T1 - Verbesserte energetische Prognose von air conomy Modulen. Vergleich zwischen Design of Experiments (DoE) und Dimensionsanalyse (Teil 2) T2 - HLH Lüftung/Klima, Heizung/Sanitär, Gebäudetechnik Y1 - 2012 VL - 63 IS - 9 SP - 32 EP - 36 PB - Springer VDI-Verlag ER - TY - GEN A1 - Adam, Mario A1 - Lohmann, Sandra T1 - Solare Kühlung – Dynamische Rechnersimulationen und Parametervariationen T2 - KI Kälte - Luft - Klimatechnik KW - Solare Kühlung Y1 - 2011 SN - 1865-5432 VL - 47 IS - 5 SP - 22 EP - 26 PB - Hüthig ER - TY - CHAP A1 - Deckert, Carsten A1 - Mohya, Ahmed A1 - Suntharalingam, Sujieban T1 - VIRTUAL WHITEBOARDS DIGITAL POST-ITS - INCORPORATING INTERNET-BASED TOOLS FOR IDEATION INTO ENGINEERING COURSES T2 - SEFI 2021: 49th ANNUAL CONFERENCE BERLIN, 13.09.-16.09.2021 Y1 - 2021 SP - 1370 EP - 1375 ER - TY - CHAP A1 - Deckert, Carsten A1 - Schomaker, Rahel A1 - Knappitsch, Eithne ED - Poznańska, Krystyna ED - Szczepańska-Woszczyna, Katarzyna ED - Michałek, Janusz T1 - Cultural Impacts on National Innovativeness and Entrepreneurship T2 - Innovation and entrepreneurship : theory and practice Y1 - 2022 SN - 9788366794306 SP - 57 EP - 84 PB - WSB University CY - Dąbrowa Górnicza ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Cicek, Aydin A1 - Eker, Arif Mert T1 - A Computational Investigation of the Thermohydraulics of an EGS Project JF - Journal of Thermal Science Y1 - 2018 U6 - https://doi.org/10.1007/s11630-018-1033-0 SN - 1003-2169 SN - 1993-033X VL - 27 IS - 5 SP - 405 EP - 412 PB - Springer ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Guin, Anindya A1 - Benim, Ali Cemal T1 - Investigation of Inclined Turbulators for Heat Transfer Enhancement in a Solar Air Heater JF - Heat Transfer Engineering Y1 - 2019 U6 - https://doi.org/10.1080/01457632.2018.1474593 VL - 40 IS - 17/18 SP - 1451 EP - 1460 PB - Taylor & Francis ER - TY - JOUR A1 - Deckert, Carsten A1 - Schomaker, Rahel M. T1 - Cultural Impacts on National Innovativeness: Not Every Cultural Dimension Is Equal JF - Cross-Cultural Research Y1 - 2019 U6 - https://doi.org/10.1177/1069397118799700 VL - 53 IS - 2 SP - 186 EP - 214 PB - sage journals ER - TY - CHAP A1 - Neef, Matthias A1 - Sulda, Erik A1 - Sürken, Norbert A1 - Walkenhorst, Jan T1 - Design Features and Performance Details of Brush Seals for Turbine Applications T2 - Proceedings of the ASME Turbo Expo 2006 : presented at the 2006 ASME Turbo Expo, May 6 - 11, 2006, Barcelona, Spain N2 - Adaptive and contacting seals such as brush seals have been successfully applied to turbomachinery for several years. In large steam turbine applications, however, various challenges still persist. Special focus is directed at the long-term performance and longevity of brushes on conventional spring-backed seal segments in steam turbines. This issue is particularly related to wear during startup conditions. This paper discusses the results of wear tests, derived from simulated transient turbine behavior, where the resultant seal leakage under steady state conditions is monitored. It is shown that the brush seal is significantly capable of adapting to varying operating conditions, but exhibits a degree of performance degradation during the initial startups. Together with previously reported mid-term wear data and an experience based long-term phenomenological approach a general model for brush seal performance degradation is developed. This model can be used for performance prediction and exerts influence on brush seal design. Y1 - 2006 SN - 0-7918-4238-X U6 - https://doi.org/10.1115/GT2006-90404 VL - 3 SP - 1385 EP - 1392 PB - ASME CY - New York ER - TY - CHAP A1 - Stodick, Klaus A1 - Deckert, Carsten ED - Sucky, Eric ED - Kolke, Reinhard ED - Biethahn, Niels ED - Werner, Jan ED - Vogelsang, Michael T1 - Sustainable Parcel Delivery in Urban Areas with Micro Depots T2 - Mobility in a Globalised World 2018 KW - city logistics KW - sustainability KW - CEP services KW - micro depots Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:473-opus4-548276 SN - 978-3863096625 SP - 233 EP - 244 PB - University of Bamberg Press CY - Bamberg ER - TY - JOUR A1 - Eversheim, Walter A1 - Bauernhansl, Thomas A1 - Deckert, Carsten A1 - Kampker, Achim A1 - Härtung, Stefan A1 - H. von der Ohe, Carsten T1 - Vom Marktteilnehmer zum Marktgestalter: Innovatives Denken eröffnet neue Wachstumsperspektiven im Maschinen- und Anlagenbau JF - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Innovative thinking opens up new growth prospects in mechanical and plant engineering. Mechanical and plant engineering has been traditionally very important to the industrial location of Germany [1]. With an export share of 70%, it has a considerable direct influence on economic structure and job market. In addition, mechanical engineering is the “innovation engine” for other core industries in Germany – as supplier of production equipment for industries such as the car manufacture, plastics processing and electrical engineering sectors. Only through this production equipment can innovative products reach production readiness in the first place, and can “Made in Germany” continue to enjoy an excellent reputation all over the world. Y1 - 2001 U6 - https://doi.org/10.3139/104.100475 VL - 96 IS - 10 SP - 522 EP - 524 PB - Hanser ER - TY - CHAP A1 - Eversheim, Walter A1 - Deckert, Carsten A1 - Westekemper, Markus T1 - Increasing Efficiency through Integration of Freeform-Features into the CAD/CAM Chain T2 - Product Data Technology Europe 2000 Y1 - 2000 SP - 355 EP - 362 ER - TY - RPRT A1 - Deckert, Carsten A1 - Eversheim, Walter T1 - Future Strategies for the Tool and Die Industry Y1 - 2001 PB - Rapid Product Development Association of South Africa (RAPDASA) CY - Stellenbosch ER - TY - THES A1 - Deckert, Carsten T1 - Wissensorientiertes Projektmanagement in der Produktentwicklung BT - Zugl.: Aachen, Techn. Hochsch., Diss., 2002. Y1 - 2002 PB - Shaker Verlag CY - Herzogenrath ER - TY - JOUR A1 - Deckert, Carsten T1 - Der Heureka!-Effekt - Vom Wissen zur Innovation JF - Wissensmanagement - Das Magazin für Führungskräfte N2 - Archimedes sollte herausfinden, ob die Krone von Hieron II tatsächlich aus Gold sei. Das spezifische Gewicht von Gold war ihm bekannt, aber für die Bestimmung des Goldgehalts musste er das Volumen der Krone berechnen. Er dachte mehrere Tage darüber nach. Doch erst als er ein Bad nahm und beobachtete, wie sein Körper das Wasser verdrängte, erkannte er, dass er das Volumen der Krone über ihre Wasserverdrängung bestimmen konnte. Er rief: Heureka! ? Ich hab´s gefunden! Archimedes ist damit zum Sinnbild für plötzliche Geistesblitze geworden. Doch warum ist er nicht sofort auf die Lösung gekommen? Y1 - 2007 VL - 9 IS - 4 SP - 10 EP - 12 ER - TY - JOUR A1 - Berrer, Oliver A1 - Deckert, Carsten T1 - Dokumente mit System managen: Vom Dokumentenmanagement zum Wissensmanagement JF - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Documents are supporting pillars of information and communication within and between companies. An electronically supported document management, which fulfils the company requirements, makes it possible to quickly and efficiently collect the required information objects and to reliably find them again. Document management serves as a core, from which the knowledge management of a company can be developed continuously. Y1 - 2006 U6 - https://doi.org/10.3139/104.101023 VL - 101 IS - 5 SP - 302 EP - 305 ER - TY - JOUR A1 - Deckert, Carsten T1 - Vitaler Wissensaustausch JF - Wissensmanagement - Das Magazin für Führungskräfte N2 - Schätzungen zufolge besitzen ein Viertel bis ein Drittel der Mitarbeiter eines Unternehmens unverzichtbares Experten-Know-how. Keine Organisation kann es sich heutzutage leisten, dieses Wissen nicht oder auch nur unvollständig zu nutzen. Darüber hinaus führt der demografische Wandel in Deutschland dazu, dass dieses Wissen den Unternehmen zunehmend verloren geht, wenn sie keinen vitalen Wissensaustausch betreiben. Y1 - 2008 VL - 10 IS - 6 SP - 44 EP - 46 ER - TY - JOUR A1 - Deckert, Carsten T1 - Der Strategieatlas - Die Zukunft aktiv gestalten JF - MQ - Management und Qualität N2 - Die Hauptaufgabe des Unternehmers ist es, das operative Tagesgeschäft und die strategische Ausrichtung des Unternehmens unter einen Hut zu bekommen. Selbst wenn ein Unternehmen das beste Produkt hat, wird es nur dann langfristig erfolgreich sein, wenn es auch eine tragfähige Strategie besitzt, welche die Richtung für die Zukunft vorgibt. Y1 - 2008 VL - 38 IS - 11 SP - 20 EP - 22 ER - TY - CHAP A1 - Du Preez, Niek A1 - Schweiger, Stefan A1 - Deckert, Carsten ED - Deckert, Klaus T1 - Wissensaustausch im Unternehmen T2 - Vital mit KOPF: Wertschöpfung durch Wissensmanagement Y1 - 2004 SN - 978-3409125659 U6 - https://doi.org/10.1007/978-3-322-87022-3_10 SP - 207 EP - 227 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Deckert, Carsten A1 - Deckert, Klaus A1 - Wittberg, Volker ED - Deckert, Klaus T1 - Unternehmensspezifisches Wissensmanagement T2 - Vital mit KOPF: Wertschöpfung durch Wissensmanagement Y1 - 2004 SN - 978-3409125659 SP - 9 EP - 29 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Deckert, Carsten A1 - Wittberg, Volker T1 - Knowledge Management in Consulting - Value Added through Knowledge Exchange with EDEN Y1 - 2004 PB - International Conference on Competitive Manufacturing CY - Stellenbosch ER - TY - CHAP A1 - Deckert, Carsten T1 - Managing Knowledge and Best Practice in the Tool and Die Industry T2 - 17th Annual Conference of the South African Institute for Industrial Engineering Y1 - 2002 CY - Stellenbosch ER - TY - JOUR A1 - Deuse, Jochen A1 - Deckert, Carsten T1 - Lean steel production - Slim production process in the steel industry JF - Stahl und Eisen Y1 - 2006 VL - 126 IS - 6 SP - 84 EP - 86 ER - TY - JOUR A1 - Deckert, Carsten A1 - Fröhlich, Elisabeth T1 - Green Logistics: Framework zur Steigerung der logistischen Nachhaltigkeit JF - IPM Supply Chain Management N2 - Bisher findet man in der Literatur nur vereinzelt Ansätze, wie Nachhaltigkeit in eine Supply Chain implementiert werden kann. Dieser Artikel skizziert ein theoretisches Grundgerüst einer nachhaltigen Supply Chain, um darauf aufbauend ein ‚Green Logistics Framework ' zu entwickeln, in dem mögliche Maßnahmen aufgezeigt werden, die hin zum Lieferanten-und Kundenmarkt eine optimale Steuerung der Supply Chain im Sinne des 6-Märkte-Modells unterstützen. Entschei-dungsträgern wird eine umfassende Toolbox an die Hand gegeben, um ein nachhaltiges Logis-tigkonzept im Sinne der unternehmerischen Zielsetzung umsetzen zu können. Stellschrau-ben finden sich im Bereich des nachhaltigen Transportmanagements, des nachhaltigen Lagerhausmanagements sowie des nachhaltigen Verpackungsmanagements. Im Rahmen des nachhaltigen Transportmanagements gilt es u. a. Transporte zu vermeiden , Transportmengen zu vermindern oder Transportschädlichkeit zu verringern. Welcher Ressourcenverbrauch und welche Aspekte der Umweltverträglichkeiten in den einzelnen Teilbereichen zu berücksichtigen sind und wie man negativen ökologischen Auswirkungen begegnet, steht im Fokus dieses Beitrags. Y1 - 2014 UR - https://www.researchgate.net/publication/271013311_Green_Logistics_Framework_zur_Steigerung_der_logistischen_Nachhaltigkeit VL - 2014 IS - 2 SP - 13 EP - 17 ER - TY - RPRT A1 - Scherer, Anke A1 - Deckert, Carsten T1 - The Dao of Innovation: What European innovators can learn from philosophical Daoism N2 - The article argues that European innovators can profit from some of the concepts of philosophical Daoism, namely "wu-wei" (non-interference) and "ziran" ("go with the flow"). Whereas most Western approaches to innovation emphasize the different stages of the creative process as well as tools to enhance creativity, the Daoist world view allows for the mind to just wander and thus spontaneously discover the solution to a problem in a rather detached state of mind. Creative minds need space for personal development and the permission to wander around without being exposed to control and instant judgement on the results. Training individuals in the tools and techniques of problem solving and creativity as the common approach in innovation management is certainly necessary, but in the end it is the intellectual accomplishment of a creative mind that produces innovation. Managers can allow this to happen when they get the balance of control and non-interference right. Y1 - 2013 PB - EAMSA - Euro-Asia Management Studies Association CY - Duisburg ER - TY - CHAP A1 - Deckert, Carsten A1 - Köhler, Petra A1 - Scherer, Anke ED - Garn, Markus T1 - Interkulturelle Innovation T2 - Jahrbuch Innovation 2014 N2 - Innovationen können zu interkulturellen Irritationen führen. Diese Erfahrung musste ein bekannter deutscher Konsumgüterhersteller bei der Produktgestaltung eines Toilettensteins machen. Das Produkt sollte durch Farbe und Form sowohl Hygiene als auch Frische suggerieren. Doch die Farben wurden so gewählt, dass das Ergebnis unglücklicherweise wie die Flagge eines benachbarten Staates aussah, was zu wütenden Protesten einiger dortiger Kunden führte. Dies ist nur ein Beweis dafür, wie wichtig es ist, interkulturelle Aspekte im Innovationsprozess zu berücksichtigen. Y1 - 2014 SN - 978-3-89981-388-3 SP - 94 EP - 99 PB - F.A.Z.-Institut für Management-, Markt- und Medieninformationen CY - Frankfurt am Main ER - TY - JOUR A1 - Deckert, Carsten T1 - Pick a Fight! Mit Streitlust zur Innovation JF - agora42 N2 - Der österreichische Psychotherapeut Paul Watzlawick hat einmal in einem Interview gesagt, dass Menschen in beratenden Berufen - seien es nun Psychotherapeuten oder Unternehmensberater - in Bezug auf ihre Klienten vor einer paradoxen Anforderung stünden. Die Anforderung lautet: "Ändere mich, ohne mich zu ändern". Das heißt, der Klient würde zwar gerne sein Problem lösen, aber nicht auf Kosten einer Veränderung des Status quo. Vor einer ähnlich paradoxen Anforderung stehen Innovatoren im Unternehmen. Die Anforderung, die dort gestellt wird, lautet: "Betreibe Innovation, ohne zu erneuern". Das bedeutet, dass Unternehmen sich gerne Innovationen wünschen, aber wiederum nicht auf Kosten einer Veränderung des status quo. Y1 - 2010 VL - 2 IS - 2 SP - 40 EP - 42 ER - TY - JOUR A1 - Deckert, Carsten T1 - Innovation Opportunities Scouting: Innovationschancen ausloten JF - Wissensmanagement - Das Magazin für Führungskräfte N2 - Bereits Joseph Alois Schumpeter – der von einem seiner Biografen auch der „Prophet of Innovation“ genannt wird – nennt in seinem 1912 erschienenen Buch „Theorie der wirtschaftlichen Entwicklung“, einem seiner Hauptwerke, neben der reinen Produktinnovation folgende weitere Möglichkeiten zur Innovation: neue Produktionsmethoden, neue Absatzmärkte, neue Beschaffungsmärkte und neue Organisationen. Y1 - 2010 VL - 12 IS - 4 SP - 20 EP - 22 ER - TY - JOUR A1 - Deckert, Carsten T1 - Internal Innovation Scouting - Potenziale für radikale Innovation JF - MQ - Management und Qualität N2 - In Zeiten zunehmender Marktdynamik und kürzer werdender Innovationszyklen fragen sich viele Unternehmen: Wie können wir das kreative Potenzial unserer eigenen Mitarbeiter besser nutzen? Denn es gibt sie in jeder Organisation: Leute, die das radikal Neue nicht nur denken, sondern auch umsetzen wollen. Y1 - 2013 VL - 43 IS - 1 SP - 12 EP - 14 ER - TY - CHAP A1 - Deckert, Carsten A1 - Monti, Alessandro A1 - Raueiser, Markus ED - Albers, Sascha T1 - A Brazilian Love Affair - Did ThyssenKrupp's Internationalization Strategy Fail? T2 - Strategy case book Y1 - 2015 SN - 978-3-942720-84-7 SP - 123 EP - 137 PB - Kölner Wissenschaftsverlag CY - Köln ER - TY - RPRT A1 - Deckert, Carsten A1 - Scherer, Anke A1 - Nyssen Guillén, Viola T1 - Cultural Impacts on National Innovativeness - Links between the GLOBE Cultural Dimensions and the GII and IUS Innovation Indexes T2 - CBD Working Paper Series N2 - The working paper at hand assumes that differences of innovativeness of different countries can be explained to a certain extent by cultural differences. Thus, the paper deals with the research question of which cultural dimensions have an influence on national innovativeness. Previous research mainly uses the Hofstede-dimensions to describe cultural differences and often focuses on single parameters to describe national innovativeness (e.g. number of patents per capita). This paper, instead, uses the dimensions of the GLOBE-study which builds on the findings of Hofstede but is more up-to-date and comprehensive and uses two innovation indexes – the Global Innovation Index (GII) and the Innovation Union Scoreboard (IUS) – to describe national innovativeness. The authors use correlation analysis to find relationships between the GLOBEdimensions and the innovation indexes. They find positive correlations of innovativeness (both indexes) to Future Orientation (practice scale), Gender Egalitarianism (value scale), Human Orientation (value scale) and Uncertainty Avoidance (practice scale) as well as negative correlations to In-Group Collectivism (practice scale), Future Orientation (value scale) and Uncertainty Avoidance (value scale). Some of the findings are contrary to existing hypotheses, e.g. only a weak negative correlation of Power Distance to one of the indexes. Furthermore the findings show significant differences between practice scales and value scales, especially concerning Future Orientation and Uncertainty Avoidance which deserve further examination. Overall it can be concluded that culture has an impact on national innovativeness. The different cultural dimensions of the GLOBE-study show a multi-faceted interrelationship between culture and innovation. To come to a concise answer for the question which dimensions affect national innovativeness in which way additional research will be necessary. KW - A_FBMV Y1 - 2015 UR - https://www.researchgate.net/publication/282868084_Cultural_Impacts_on_National_Innovativeness_-_Links_between_the_GLOBE_Cultural_Dimensions_and_the_GII_and_IUS_Innovation_Indexes/download VL - 1 PB - Cologne Business School CY - Köln ER - TY - CHAP A1 - Deckert, Carsten A1 - Scherer, Anke ED - Preiß, Jürgen T1 - Dao der Innovation: Spannungsfelder der Kreativität in Unternehmen T2 - Jahrbuch der Kreativität 2014 N2 - In dem Beitrag beschreiben die Autoren einige der Widersprüche und Paradoxien im Zusammenhang mit Kreativität und schlagen die Nutzung des Wertequadrats nach Helwig zu deren Beschreibung vor. Die Autoren beschreiben die dynamische Balance, die zwischen Handeln und Geschehen-Lassen bei der individuellen Kreativität besteht. Außerdem gehen sie auf die Balance aus Führung durch Kontrolle und Führung durch Vertrauen ein, die für die Coporate Creativity erforderlich ist. Die Missachtung dieser dynamischen Balance bei der individuellen Kreativität kann zu einer "Culture of Looking Busy" führen, bei der rein kontemplative Tätigkeiten als unproduktiv angesehen werden. Bei der Corporate Creativity kann sie zu einer "Culture of Compulsive Control" führen, bei der Manager versuchen, die Kreativität ihrer Mitarbeiter zu kontrollieren anstatt sie zu fördern und zu unterstützen. Y1 - 2016 UR - https://www.researchgate.net/publication/272291399_Dao_der_Innovation_Spannungsfelder_der_Kreativitat_in_Unternehmen SN - 978-3-7392-0194-8 SP - 101 EP - 118 PB - Books on Demand CY - Norderstedt ER - TY - JOUR A1 - Deckert, Carsten T1 - Spannungsfelder der Kreativität I - Der kreative Prozess JF - Ideen- und Innovationsmanagement N2 - Die Definition der individuellen Kreativität basiert auf einem fundamentalen Spannungsverhältnis zwischen Neuartigkeit und Originalität auf der einen Seite sowie Nützlichkeit und Angemessenheit auf der anderen Seite. Man kann in Anlehnung an den Welle-Teilchen-Dualismus des Lichtes auch von einem Originalitäts-Effektivitäts-Dualismus der Kreativität sprechen. Diese zweiteilige Serie betrachtet die Auswirkungen dieses Spannungsverhältnisses auf den kreativen Prozess und die Komponenten der Kreativität. In diesem ersten Teil wird das Spannungsverhältnis des kreativen Prozesses aus Handeln und Geschehen-Lassen betrachtet. In der nächsten Ausgabe folgt ein Beitrag über die Spannungsfelder der Komponenten der Kreativität nach Amabile: Expertise, kreative Denkfertigkeiten und Motivation. Zur Darstellung dieser Sachverhalte wird das Wertequadrat nach Helwig (1967) und Schulz von Thun (1998) verwendet, in dem ein Wert ins Verhältnis mit seinem positiven Gegenwert gesetzt wird. Dadurch können bzgl. des kreativen Prozesses die negativen Auswirkungen operativer Hektik in Form einer „Culture of Looking Busy“ und Implikationen für das individuelle Zeitmanagement abgeleitet werden. Y1 - 2016 VL - 43 IS - 2 PB - Erich Schmidt Verlag ER - TY - JOUR A1 - Deckert, Carsten T1 - Spannungsfelder der Kreativität II - Komponenten der Kreativität JF - Ideen- und Innovationsmanagement N2 - Die Definition der individuellen Kreativität basiert auf einem fundamentalen Spannungsverhältnis zwischen Neuartigkeit und Originalität auf der einen Seite sowie Nützlichkeit und Angemessenheit auf der anderen Seite. Man kann in Anlehnung an den Welle-Teilchen-Dualismus des Lichtes auch von einem Originalitäts-Effektivitäts-Dualismus der Kreativität sprechen. Diese zweiteilige Serie betrachtet die Auswirkungen dieses Spannungsverhältnisses auf den kreativen Prozess und die Komponenten der Kreativität. Im ersten Teil wurde bereits das Spannungsverhältnis des kreativen Prozesses aus Handeln und Geschehen-Lassen betrachtet. In diesem Beitrag werden die Spannungsfelder der Komponenten der Kreativität nach Amabile behandelt: Expertise, kreatives Denken und Motivation. Zur Darstellung dieser Sachverhalte wird das Wertequadrat nach Helwig und Schulz von Thun verwendet, in dem ein Wert ins Verhältnis mit seinem positiven Gegenwert gesetzt wird. Dadurch können bzgl. der Komponenten der Kreativität Verbesserungsmaßnahmen abgeleitet und ein morphologischer Kasten der Kreativität aufgestellt werden. Y1 - 2016 VL - 43 IS - 3 PB - Erich Schmidt Verlag ER - TY - RPRT A1 - Deckert, Carsten A1 - Buß, Mareike A1 - Hasenclever, Stephanie A1 - Mäckel, Frederic A1 - Nyssen Guillén, Viola A1 - Silverio, Isabell A1 - Wegner, Eileen T1 - Beer Picking Game - Entwicklung und Realisierung eines Planspiels zur Simulation eines Kommissionierbereichs T2 - CBS Working Paper Series Y1 - 2016 UR - https://www.researchgate.net/publication/305202910_Beer_Picking_Game_-_Entwicklung_und_Realisierung_eines_Planspiels_zur_Simulation_eines_Kommissionierbereichs VL - 2 PB - Cologne Business School CY - Köln ER - TY - RPRT A1 - Willers, Christoph A1 - Deckert, Carsten A1 - Weber, Torsten T1 - eFood in Deutschland – Käufertypen in einem Potenzialmarkt N2 - Die Studie des Competence Center Food & Retail (CCFR) der Cologne Business School (CBS) ermittelt Erfolgsfaktoren, Konsumententypen und Handlungsempfehlungen für den Online-Handel mit Lebensmitteln in Deutschland. Grundlage der vorliegenden Studie ist eine im Sommer 2014 durchgeführte onlinebasierte Verbraucherbefragung zum Thema „Online-Kauf von Lebensmitteln“. Y1 - 2015 PB - Fördergesellschaft Produktmarketing CY - Berlin ER - TY - JOUR A1 - Deckert, Carsten A1 - Scherer, Anke T1 - The Dao of Innovation: What European Innovators Can Learn from Philosophical Daoism JF - Kindai Management Review N2 - A central question for managers in charge of innovation is to what extent creativity and inno-vation can be controlled and supervised, or whether they just have to be set free and allowed to take shape. In assessing this dilemma the authors conclude that there is a contradiction of action versus inaction on the personal level as well as a contradiction of control versus loss of control on the organizational level. What European innovators can learn from philosophical Daoism is an attitude that allows a process to just develop “naturally” and refrains from prem-ature interference with the intention to permanently be in control. In business structures that judge everything according to its usefulness, i.e. profitability for the company, a look at the laid-back attitude of Daoism where usefulness and uselessness are relative qualities might relief the pressure on people to perform in a premeditated way. Innovation can be supported, but creativity cannot be forced. It can only be allowed to happen when control, interference, and action are balanced out with non-interference, and go-with-the-flow. This attitude in not an excuse for stressed-out managers to neglect their duty, but a time honoured worldview of one of the oldest civilizations in the world that can give them the sovereignty to “get out of the way” and let innovation happen. Y1 - 2017 VL - 5 IS - 4 SP - 105 EP - 118 ER - TY - JOUR A1 - Deckert, Carsten T1 - On the Originality-Effectiveness Duality of Creativity: Tensions Concerning the Components of Creativity JF - Business Creativity and the Creative Economy N2 - The standard definition of individual creativity is based on a tension between originality on the one side and effectiveness (usefulness and appropriateness) on the other side. In this article this tension is called the originality-effectiveness duality of creativity. The article explores how this duality pervades the componential theories of creativity. To analyze the components of creativity with regard to their tensions, the so called value square (“Wertequadrat”) developed by Helwig (1967) and Schulz von Thun (1998) is used. The value square explains each component as a dynamic equilibrium and shows how a positive value is balanced with its positive countervalue. Tensions of mindfulness, precision and ambiguity, as well as immersion and detachment are identified permeating the components of creativity. This article explores the implications these tensions have for creativity research and for businesses in a creative economy. Y1 - 2016 U6 - https://doi.org/10.18536/bcce.2016.10.2.1.07 VL - 2 IS - 1 SP - 70 EP - 82 ER - TY - JOUR A1 - Deckert, Carsten A1 - Mäckel, Frederic T1 - Bestimmung des Carbon Footprints in der Transportbranche – Status und Entwicklungstendenzen in Nordrhein-Westfalen JF - uwf UmweltWirtschaftsForum KW - Hybrid Y1 - 2016 U6 - https://doi.org/10.1007/s00550-016-0427-2 VL - 24 IS - 4 SP - 269 EP - 276 PB - Springer ER - TY - JOUR A1 - Deckert, Carsten T1 - Ecological sustainability of material resources – Why material efficiency just isn’t enough JF - uwf UmweltWirtschaftsForum Y1 - 2016 U6 - https://doi.org/10.1007/s00550-016-0419-2 VL - 24 IS - 4 SP - 325 EP - 335 PB - Springer ER - TY - JOUR A1 - Deckert, Carsten A1 - Guillén, Viola Isabel Nyssen T1 - Kulturelle Einflüsse auf die nationale Innovationsfähigkeit JF - WiSt - Wirtschaftswissenschaftliches Studium Y1 - 2017 U6 - https://doi.org/10.15358/0340-1650-2017-7-8-25 VL - 46 IS - 7-8 SP - 25 EP - 31 PB - Vahlen ER - TY - JOUR A1 - Deckert, Carsten T1 - Spannungsfelder der Corporate Creativity: Einflüsse des Arbeitsumfelds auf die organisationale Kreativität JF - Zeitschrift OrganisationsEntwicklung Y1 - 2017 IS - 3 SP - 79 EP - 82 ER - TY - JOUR A1 - Deckert, Carsten T1 - Tensions in Creative Products: Using the Value Square to Model Functional Creativity JF - International Journal of Creativity & Problem Solving Y1 - 2017 VL - 26 SP - 71 EP - 93 ER - TY - JOUR A1 - Boß, Sebastian A1 - Deckert, Carsten T1 - Einsatz von PPS-Lösungen in KMUs JF - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb N2 - Das vorliegende Working Paper beschreibt die Entwicklung eines Planspiels zur Simulation selektiver Lagerhaltungsstrategien im Distributionsnetzwerk. Die Gestaltung der Distributionsstruktur hat Auswirkungen auf den Lieferservice und die Kosten (Standort-, Bestands- und Transportkosten), die im Planspiel simuliert werden können. Dabei werden insbesondere Aspekte der zentralen und dezentralen Lagerung sowie der Bestandsbündelung und des Sicherheitsbestandes vermittelt. Das Planspiel wurde in MS Excel umgesetzt und in zwei Kursen getestet – in einem Bachelor- und einem MBA-Kurs. Trotz der geringen Komplexität wurde eine vertiefte Lernerfahrung der Studierenden erzielt, die sich durch das selbsttätige Ausprobieren und den Spielspaß bei der Lösungssuche ergab. Y1 - 2017 U6 - https://doi.org/10.3139/104.111790 VL - 112 IS - 11 SP - 811 EP - 815 PB - Hanser ER - TY - CHAP A1 - Deckert, Carsten T1 - Creative Heuristics in Engineering Education T2 - 46th SEFI Annual Conference in Copenhagen 17-21 September 2018 "Creativity, Innovation and Entrepreneurship for Engineering Education Excellence" KW - Creativity KW - Heuristics KW - Invention Y1 - 2018 UR - https://www.researchgate.net/publication/327801276_Creative_Heuristics_in_Engineering_Education/download CY - Copenhagen ER - TY - RPRT A1 - Deckert, Carsten A1 - Rehberg, David A1 - Rütten, Pia T1 - Beer Inventory Game: Entwicklung und Realisierung eines Planspiels zur Simulation selektiver Lagerhaltungsstrategien im Distributionsnetzwerk T2 - CBS Working Paper Series Y1 - 2017 U6 - https://doi.org/10.13140/RG.2.2.31366.88641 VL - 3 PB - Cologne Business School CY - Köln ER - TY - CHAP A1 - Deckert, Carsten ED - Lu, Hualiang ED - Schmidpeter, René ED - Capaldi, Nicholas ED - Zu, Liangrong T1 - Sustainable Logistics: A Framework for Green Logistics and City Logistics T2 - Building New Bridges Between Business and Society Y1 - 2018 SN - 978-3-319-63560-6 U6 - https://doi.org/10.1007/978-3-319-63561-3_4 SP - 53 EP - 70 PB - Springer International Publishing CY - Cham ER - TY - RPRT A1 - Deckert, Carsten A1 - Nawrat, Nicole A1 - Scherer, Anke T1 - Cultural Product Design Matrix T2 - CBS Working Paper Series Y1 - 2018 UR - https://www.researchgate.net/publication/326041216_Cultural_Product_Design_Matrix SN - 2195-6618 VL - 2 PB - Cologne Business School CY - Köln ER - TY - JOUR A1 - Deckert, Carsten A1 - Görs, Nadine T1 - Transport carbon footprint in the german courier, express and parcel industry (CEP industry) JF - Sustainability Management Forum | NachhaltigkeitsManagementForum Y1 - 2019 U6 - https://doi.org/10.1007/s00550-018-0471-1 VL - 27 IS - 1 SP - 23 EP - 30 PB - Springer ER - TY - JOUR A1 - Kretschmar, Dominik A1 - Niemann, Jörg A1 - Deckert, Carsten T1 - Digitalisierungsindex zur prozessnahen Analyse mittelständischer Unternehmen JF - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb Y1 - 2019 U6 - https://doi.org/10.3139/104.112064 SN - 0947-0085 VL - 114 IS - 4 SP - 213 EP - 218 PB - Hanser ER - TY - CHAP A1 - Deckert, Carsten ED - Fröhlich, Elisabeth ED - Lord, Sascha ED - Steinbiß, Kristina ED - Weber, Torsten T1 - Merkmale von Innovationen T2 - Marketing Y1 - 2018 SN - 3825249905 SP - 137 EP - 138 PB - UVK CY - Konstanz; München; Stuttgart ER - TY - GEN A1 - Belenkiy, Stanislav T1 - Ausarbeitung der statistischen Methodik zur Auswertung der Tätigkeit des Mitarbeiters N2 - Das Ziel der Arbeit von S. Belenkiy ist die Forschung im Bereich der theoretischen und methodischen Grundlagen der Entwicklung von Strategien zur Personalplanung und die Ausarbeitung von theoretischen Empfehlungen für die Abschätzung und Entscheidungswahl. Entsprechend der aufgestellten Ziele wurden folgende Aufgaben ausgearbeitet: 1. Entwicklung eines Verfahrens zur Bestimmung und Abschätzung der Effektivität der Zusammenarbeit mit einem bestimmten Mitarbeiter; 2. Entwicklung der Methodik zur Auswahl der Alternative der Strategie zur Personalverwaltung in Abhängigkeit von dem Szenario der Dynamik der Geschäftsumgebung und der Situation in dem Arbeitskollektiv auf der Basis der Wahrscheinlichkeitstheorie und statistischen Analyse. Die entwickelte Methodik erlaubt eine umfassende Analyse des Zustandes der Personal-Ressourcen auf der Ebene von Kollektiven oder Arbeitsgruppen bis zum einzelnen Mitarbeiter durchzuführen. Erreichte Ergebnisse sind in der Praxis einfach zu adaptieren und können in das System der strategischen Planung von Unternehmen verschiedener juristischer Formen, Produktionsrichtungen oder Dienstleistungsschwerpunkten einwandfrei integriert werden. N2 - The focus of this paper, "Development of the Statistical Method for Estimation of the Employee" presented by Stanislav Belenkiy, is in the field of theoretical fundamentals and applied procedures of strategic personnel planning. The final user of these scientific results will have support in the decision making process and an effective toolset that allows one to make a statistically reliable estimation. It elaborates on such topics as: 1) development of the process structure for the definition and estimation of cooperation effectiveness; 2) developing of the procedure of choosing the best strategic alternative and decision making in personal management depending on the enviroment dynamic scenario and the situation inside the workgroup on the basis of statistical analysis and theory of probability. The suggested procedures enable the thorough analysis of the state of a company`s human resources, from the complete staff body or certain workgroups, to an individual employee. Achieved results are easy tio apply in practice and could be embedded in strategic planning systems of awide variety of organisations, whether industrial or service oriented. KW - Prognose KW - Wahrscheinlichkeit KW - Planung KW - Auswertung KW - Statistik KW - FHD Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4312 CY - Düsseldorf ER - TY - GEN T1 - Fachbereich Maschinenbau und Verfahrenstechnik T1 - Department of mechanical and process engineering N2 - Selbstdarstellung des Fachbereichs Maschinenbau und Verfahrenstechnik der Fachhochschule Düsseldorf KW - Aussendarstellung KW - Fachbereich Maschinenbau und Verfahrenstechnik KW - MV KW - FHD Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-312 SN - 3-923669-66-6 CY - Düsseldorf ER - TY - GEN T1 - 13 - Ziel- und Leistungsvereinbarung zwischen dem Land NRW, vertreten durch das Ministerium für Schule, Wissenschaft und Forschung, und der Fachhochschule Düsseldorf (Teil 1), Anlage 2 der Studienordnung vom 17.09.2001, Praxisphasenordnung für die Studiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" im Fachbereich Maschinenbau und Verfahrenstechnik vom 19.01.2002 (Teil 1) N2 - Teil 1: Ziel- und Leistungsvereinbarung zwischen dem Land NRW, vertreten durch das Ministerium für Schule, Wissenschaft und Forschung, und der Fachhochschule Düsseldorf; Teil 2: Anlage 2 der Studienordnung vom 17.09.2001, Praxisphasenordnung für die Studiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" im Fachbereich Maschinenbau und Verfahrenstechnik an der Fachhochschule Düsseldorf vom 19.01.2002 T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 13 KW - Verkündungsblatt KW - Zielvereinbarung KW - Leistungsvereinbarung KW - NRW KW - Ministerium KW - Maschinenbau KW - Verfahrenstechnik KW - Amtliche Mitteilungen KW - MV Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-665 CY - Düsseldorf ER - TY - GEN T1 - 11 - Zweite Satzung zur Änderung der Studienordnung für die Studiengänge Maschinenbau und Verfahrenstechnik im Fachbereich Maschinenbau und Verfahrenstechnik der Fachhochschule Düsseldorf vom 12.02.2002 (Teil 1), Erste Satzung zur Änderung der Diplomprüfungsordnung für die Studiengänge Sozialarbeit und Sozialpädagogik an der Fachhochschule Düsseldorf in den Fachbereichen Sozialarbeit und Sozialpädagogik vom 12.02.2002 (Teil 2), Geschäftsordnung des Senats der Fachhochschule Düsseldorf vom 20.02.2002 (Teil 3), Erlass vom 13.02.2002 -322-, Einreise von Männern zwischen 16 und 45 Jahren in die Vereinigten Staaten von Amerika (Teil 4), Wahlergebnisse (Teil 5) N2 - Teil 1: Zweite Satzung zur Änderung der Studienordnung für die Studiengänge Maschinenbau und Verfahrenstechnik im Fachbereich Maschinenbau und Verfahrenstechnik der Fachhochschule Düsseldorf vom 12.02.2002; Teil 2: Erste Satzung zur Änderung der Diplomprüfungsordnung für die Studiengänge Sozialarbeit und Sozialpädagogik an der Fachhochschule Düsseldorf in den Fachbereichen Sozialarbeit und Sozialpädagogik vom 12.02.2002; Teil 3: Geschäftsordnung des Senats der Fachhochschule Düsseldorf vom 20.02.2002; Teil 4: Erlass vom 13.02.2002 -322-, Einreise von Männern zwischen 16 und 45 Jahren in die Vereinigten Staaten von Amerika; Teil 5: Wahlergebnisse T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 11 KW - Verkündungsblatt KW - Amtliche Mitteilungen Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-694 CY - Düsseldorf ER - TY - GEN T1 - 10 - Fachbereichsordnung für den Fachbereich Architektur (Teil 1), Fachbereichsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik (Teil 2), Fachbereichsordnung für den Fachbereich Sozialarbeit (Teil 3), Zweite Satzung zur Änderung der Diplomprüfungsordnung für die Studiengänge Maschinenbau und Verfahrenstechnik vom 15.01.2002 (Teil 4), Erste Satzung zur Änderung der Prüfungsordnung für die Bachelorstudiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" im Fachbereich Maschinenbau und Verfahrenstechnik vom 16.01.2002 (Teil 5), Erste Änderungssatzung der Studienordnung für den Studiengang Internationale Betriebswirtschaft vom 29.06.1999 im Fachbereich Wirtschaft vom 07.01.2002 (Teil 6) N2 - Teil 1: Fachbereichsordnung für den Fachbereich Architektur der Fachhochschule Düsseldorf; Teil 2: Fachbereichsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik der Fachhochschule Düsseldorf; Teil 3: Fachbereichsordnung für den Fachbereich Sozialarbeit der Fachhochschule Düsseldorf; Teil 4: Zweite Satzung zur Änderung der Diplomprüfungsordnung für die Studiengänge Maschinenbau und Verfahrenstechnik der Fachhochschule Düsseldorf vom 15.01.2002; Teil 5: Erste Satzung zur Änderung der Prüfungsordnung für die Bachelorstudiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" im Fachbereich Maschinenbau und Verfahrenstechnik der Fachhochschule Düsseldorf vom 16.01.2002; Teil 6: Erste Änderungssatzung der Studienordnung für den Studiengang Internationale Betriebswirtschaft vom 29.06.1999 der Fachhochschule Düsseldorf im Fachbereich Wirtschaft vom 07.01.2002 T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 10 KW - Verkündungsblatt KW - Fachbereichsordnung KW - Diplom KW - Maschinenbau KW - Verfahrenstechnik KW - Amtliche Mitteilungen Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-682 CY - Düsseldorf ER - TY - GEN T1 - 6 - Studienordnung für die Bachelorstudiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" im Fachbereich Maschinenbau und Verfahrenstechnik vom 17.09.2001 (Teil 1),Prüfungsordnung für die Bachelorstudiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" im Fachbereich Maschinenbau und Verfahrenstechnik vom 17.09.2001 (Teil 2), Studienordnung für den Masterstudiengang "Simulation und Experimentaltechnik" im Fachbereich Maschinenbau und Verfahrenstechnik vom 17.09.2001 (Teil 3), Prüfungsordnung für den Masterstudiengang "Simulation und Experimentaltechnik" im Fachbereich Maschinenbau und Verfahrenstechnik vom 17.09.2001 (Teil 4), Prüfungsordnung für den Bachelorstudiengang "Kommunikations- und Informationstechnik" im Fachbereich Elektrotechnik vom 20.09.2001 (Teil 5) N2 - Teil 1: Studienordnung für die Bachelorstudiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" der Fachhochschule Düsseldorf im Fachbereich Maschinenbau und Verfahrenstechnik vom 17.09.2001; Teil 2: Prüfungsordnung für die Bachelorstudiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" der Fachhochschule Düsseldorf im Fachbereich Maschinenbau und Verfahrenstechnik vom 17.09.2001; Teil 3: Studienordnung für den Masterstudiengang "Simulation und Experimentaltechnik" der Fachhochschule Düsseldorf im Fachbereich Maschinenbau und Verfahrenstechnik vom 17.09.2001; Teil 4: Prüfungsordnung für den Masterstudiengang "Simulation und Experimentaltechnik" der Fachhochschule Düsseldorf im Fachbereich Maschinenbau und Verfahrenstechnik vom 17.09.2001; Teil 5: Prüfungsordnung für den Bachelorstudiengang "Kommunikations- und Informationstechnik" der Fachhochschule Düsseldorf im Fachbereich Elektrotechnik vom 20.09.2001; T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 6 KW - Verkündungsblatt KW - Maschinenbau KW - Verfahrenstechnik KW - Amtliche Mitteilungen Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-738 CY - Düsseldorf ER - TY - GEN T1 - 21 - Erste Satzung zur Änderung der Studienordnung für die Bachelorstudiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" im Fachbereich Maschinenbau und Verfahrenstechnik vom 04. März 2003 (Teil 1), Zweite Satzung zur Änderung der Bachelorprüfungsordnung für die Bachelorstudiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" im Fachbereich Maschinenbau und Verfahrenstechnik vom 04. März 2003 (Teil 2), Erste Satzung zur Änderung der Masterprüfungsordnung für den Masterstudiengang "Simulation und Experimentaltechnik" im Fachbereich Maschinenbau und Verfahrenstechnik vom 04. März 2003 (Teil 3), Erste Satzung zur Änderung der Studienordnung für den Masterstudiengang "Simulation und Experimentaltechnik" im Fachbereich Maschinenbau und Verfahrenstechnik vom 04. März 2003 (Teil 4) N2 - Teil 1: Erste Satzung zur Änderung der Studienordnung für die Bachelorstudiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" der Fachhochschule Düsseldorf im Fachbereich Maschinenbau und Verfahrenstechnik vom 04. März 2003; Teil 2: Zweite Satzung zur Änderung der Bachelorprüfungsordnung für die Bachelorstudiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" der Fachhochschule Düsseldorf im Fachbereich Maschinenbau und Verfahrenstechnik vom 04. März 2003; Teil 3: Erste Satzung zur Änderung der Masterprüfungsordnung für den Masterstudiengang "Simulation und Experimentaltechnik" der Fachhochschule Düsseldorf im Fachbereich Maschinenbau und Verfahrenstechnik vom 04. März 2003; Teil 4: Erste Satzung zur Änderung der Studienordnung für den Masterstudiengang "Simulation und Experimentaltechnik" der Fachhochschule Düsseldorf im Fachbereich Maschinenbau und Verfahrenstechnik vom 04. März 2003 T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 21 KW - Verkündungsblatt KW - Maschinenbau KW - Verfahrenstechnik KW - Bachelor KW - Änderung KW - Prüfungsordnung KW - Studienordnung KW - Master KW - Amtliche Mitteilungen Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-586 CY - Düsseldorf ER - TY - GEN A1 - Oesterwind, Dieter T1 - Energiewirtschaft N2 - Vorlesungsscript "Energiewirtschaft" von Prof. Oesterwind (SS 2007); KW - Energiewirtschaft KW - Script KW - Oesterwind KW - Ressourcenökonomie KW - Energiemärkte KW - FHD Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-3429 CY - Düsseldorf ER - TY - GEN T1 - 118 - Evaluationsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik an der Fachhochschule Düsseldorf vom 16.11.2006 N2 - Aufgrund des § 1 der Evaluationsordnung für Studium und Lehre an der Fachhochschule Düsseldorf vom 06.08.2003 (Verkündungsblatt Nr. 23/Teil 3), in Verbindung mit § 6 Abs. 3 des Gesetzes über die Hochschulen im Land Nordrhein-Westfalen (Hochschulgesetz - HG) vom 30. November 2004, hat der Fachbereich Maschinenbau und Verfahrenstechnik der Fachhochschule Düsseldorf die folgende Eva-luationsordnung erlassen : T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 118 KW - Evaluation KW - Amtliche Mitteilungen KW - Maschinenbau KW - Verfahrenstechnik KW - Evaluationsordnung Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-3190 CY - Düsseldorf ER - TY - GEN T1 - 117 - Zweite Satzung zur Änderung der Prüfungsordnung für den Diplom-Studiengang Maschinenbau und Verfahrenstechnik an der Fachhochschule Düsseldorf vom 16.11.2006 N2 - Aufgrund des § 2 Abs. 4 und des § 66 Abs. 2 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 14. März 2000 (GV.NRW S. 190), zuletzt geändert durch Gesetz vom 21. März 2006 (GV. NRW. S. 119), hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 117 KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Verfahrenstechnik KW - Maschinenbau KW - Änderung KW - Diplom KW - Prüfungsrecht Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-3187 CY - Düsseldorf ER - TY - RPRT A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Happel, Holger T1 - Modellierung eines Strohhalmes in einem Mehrkörpersimulationsprogramm T1 - Modeling of a Wheat Straw by Means of a Multi Body Simulation Program N2 - Im Rahmen dieser Ausarbeitung wird gezeigt, wie ein Weizenstrohhalm in dem Mehrkörpersimulationsprogramm SIMMECHANICS, das ein Zusatztool des Simulations- und Berechnungsprogramms MATLAB(R) bzw. SIMULINK(R) ist, modelliert werden kann. Die Modellierung erfolgt mit dem Ziel, den im Mähdrescherhäcksler stattfindenden Schnittprozess zu simulieren. Dazu werden zuerst die für einen Schnitt relevanten Eigenschaften des Weizenstrohhalmes ermittelt. Dies sind insbesondere die Halmmasse sowie die Winkelfeder- und Winkeldämpfungskonstante. Anschließend wird die Modellierung des Halmes in dem genannten Mehrkörpersimulationsprogramm gezeigt. Abschließend erfolgt ein Vergleich des erstellten Simulationsmodells mit dem realen Strohhalm. N2 - The present paper investigates into the technique of modeling a wheat straw using the multi body simulation program SIMMECHANICS being an add-on of the simulation and calculation program MATLAB(R) or SIMULINK(R) respectively. Modeling of the straw aims at simulating the cutting process taking place inside a combined harvester. Step one identifies meaningful data concerning the characteristics of the straw with respect to the cutting process, in particular blade mass, angle resilience- and angle damping constant. Step two shows how modelling of the straw is performed using SIMMECHANICS. The final chapter compares the simulation model with the behaviour of a typical straw as found in nature. KW - Simulation KW - Erntetechnik KW - Häcksler KW - Messung KW - Land- und Agrartechnik KW - simulation KW - harvest KW - crop chopper KW - measurement KW - agricultural technology KW - FHD Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-3624 CY - Düsseldorf ER - TY - GEN T1 - 160 - Prüfungsordnung für den Bachelor-Studiengang "Produktentwicklung und Produktion"(PP) und den Bachelor-Studiengang "Prozess-, Energie- und Umwelttechik" (PEU) an der Fachhochschule Düsseldorf vom 05.05.2008 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474), zuletzt geändert durch Gesetz vom 20. Dezember 2007 (GV.NRW. S. 750), hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 160 KW - Bachelor KW - Amtliche Mitteilungen KW - MV KW - Maschinenbau KW - Verfahrenstechnik KW - Prüfungsrecht Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4497 CY - Düsseldorf ER - TY - GEN T1 - 159 - Sechste Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang "Produktentwicklung und Produktion" (PP) und für den Bachelor-Studiengang "Prozess-, Energie- und Umwelttechnik" (PEU) an der Fachhochschule Düsseldorf vom 05.05.2008 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474), zuletzt geändert durch Gesetz vom 20. Dezember 2007 (GV.NRW. S. 750), hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 159 KW - Bachelor KW - Amtliche Mitteilungen KW - MV KW - Maschinenbau KW - Verfahrenstechnik Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4480 CY - Düsseldorf ER - TY - GEN T1 - 175 - Prüfungsordnung für die Bachelor-Studiengänge “Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Fachhochschule Düsseldorf vom 29.07.2008 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474), zuletzt geändert durch Gesetz vom 13. März 2008 (GV.NRW. S. 195), hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 175 KW - Prüfungsordnung KW - Bachelor KW - Amtliche Mitteilungen KW - Produktentwicklung und Produktion KW - Prozess-, Energie- und Umwelttechnik KW - Prüfungsrecht Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4728 CY - Düsseldorf ER - TY - GEN T1 - 176 - Prüfungsordnung für den Master-Studiengang “Simulation und Experimentaltechnik“ an der Fachhochschule Düsseldorf vom 29.07.2008 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474), zuletzt geändert durch Gesetz vom 13. März 2008 (GV.NRW. S. 195), hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 176 KW - Prüfungsordnung KW - Master KW - Amtliche Mitteilungen KW - Simulation KW - Experimentaltechnik KW - MV KW - Prüfungsrecht KW - FHD Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4691 CY - Düsseldorf ER - TY - GEN T1 - 54 - Studienordnung für den Master Studiengang Simulation und Experimentaltechnik an der Fachhochschule Düsseldorf vom 03.02.2005 N2 - Aufgrund des § 2 Abs. 4 und des § 108 Abs. 2 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 14. März 2000 (GV.NRW S. 190), zuletzt geändert durch Gesetz vom 30. November 2004 (GV. NRW. S. 752), hat die Fachhochschule Düsseldorf die folgende Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 54 KW - Studienordnung KW - Simulation und Experimentaltechnik KW - Master KW - Maschinenbau KW - Verfahrenstechnik KW - MV KW - Amtliche Mitteilungen KW - FHD Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-1475 CY - Düsseldorf ER - TY - GEN T1 - 47 - Zweite Satzung zur Änderung der Studienordnung für den Master-Studiengang Simulation und Experimentaltechnik an der Fachhochschule Düsseldorf vom 03.02.2005 N2 - Aufgrund des § 2 Abs. 4 und des § 108 Abs. 2 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 14. März 2000 (GV.NRW S. 190), zuletzt geändert durch Gesetz vom 30. November 2004 (GV. NRW. S. 752), hat die Fachhochschule Düsseldorf die folgende Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 47 KW - Verkündungsblatt KW - Studienordnung KW - Simulation und Experimentaltechnik KW - Maschinenbau KW - Verfahrenstechnik KW - Amtliche Mitteilungen KW - Master Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-1272 CY - Düsseldorf ER - TY - CHAP A1 - Gottschald, Jonas T1 - Machine Learning zur Betriebsoptimierung einer hybriden Wärmezentrale T2 - 33. Symposium Solarthermie und innovative Wärmesysteme, 09.-11. Mai 2023 KW - BestHeatNet Y1 - 2024 ER - TY - GEN T1 - 147 - Prüfungsordnung für den Bachelor-Studiengang "Produktentwicklung und Produktion"(PP) und den Bachelor-STudiengang "Prozess-, Energie- und Umwelttechnik"(PEU) an der Fachhochschule Düsseldorf vom 13.12.2007 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 147 KW - Bachelor KW - Amtliche Mitteilungen KW - Prozesstechnik KW - Energietechnik KW - MV KW - Maschinenbau Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4356 CY - Düsseldorf ER - TY - RPRT A1 - Bhaiya, Madhur A1 - Jahr, Andreas A1 - Happel, Holger T1 - Harvesting-Combine-Flow Simulation Technique N2 - CFX 11.0 is a Computational Fluid Dynamics (CFD) program for simulating the behavior of systems involving fluid flow, heat transfer, and other related physical processes. It works by solving the equations of fluid flow (in a special form) over a region of interest, with specified (known) conditions on the boundary of that region. This tool is used here to analyse the straw cutter which is used to comminute the straw which is left standing in the field after stripper header has stripped the grains from the crops. Stripper Header is a new technique different to conventional harvester machines and it is still under development and testing. It works on the principle in which grains are first stripped off from the head of the standing crop which helps in much reduced intake freeing up the separation systems to handle a larger volume of grains. But with this, the new problem of the disposal of the long, uncut straw left after stripping of grains arose. So a straw cutter is used after the stripper header stage in this Combine Harvester, where the rotor is equipped with pressed steel blades and rotates towards the crop, i.e., it cuts and lifts the straw over the top. This technique is environment friendly because previously farmers would have to burn the long, uncut straw standing in the fields while in this case mulched straw can be used for min-till systems. This rotor based straw cutting machine is analysed here which helps us in increasing power efficiency and comminution rate and quality of cut straw particles. Here fluid flow simulation has been preferred over particle simulation: - CFX 10.0 tool is not very effective for particle simulation techniques and computation time is increased considerably. - It’s very hard to realize particle simulation in CFX 10.0 because we have to define size and properties of each particle and besides this wall conditions would have to be defined differently for every boundary. - Besides this, it’s hard to realize cutting effect with straw particles in CFX 10.0 which otherwise would be comminuted in real life conditions. - The results obtained from fluid simulation are validated using experimental results and found to be nearly the same which clearly contradicts any need of performing particle simulation. KW - Häckseln KW - Ernte KW - Stroh KW - Partikelstrom KW - CFD KW - chaff KW - harvesting KW - Particle flow KW - simulation KW - FHD Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4239 CY - Düsseldorf ER - TY - GEN T1 - 146 - Fünfte Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang „Produktentwicklung und Produktion“ (PP) und für den Bachelor-Studiengang „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Fachhochschule Düsseldorf vom 13.12.2007 N2 - Datum: 13.12.2007; Fünfte Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang "Produktentwicklung und Produktion" (PP) und für den Bachelor-Studiengang "Prozwss-, Energie- und Umwelttechnik" (PEU) an der Fachhochschule Düsseldorf; T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 146 KW - Bachelor KW - Amtliche Mitteilungen KW - MV KW - Prozesstechnik KW - Energietechnik KW - Prüfungsrecht KW - Maschinenbau KW - Verfahrenstechnik KW - Prüfungsordnung Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4340 CY - Düsseldorf ER - TY - THES A1 - Belenkiy, Stanislav T1 - Entwicklung von Software für Unternehmungsmanagement-Simulation T1 - Development of the software for business management simulation N2 - Ziel der Master-Thesis von S. Belenkiy zum Thema "Entwicklung von Software für die Simulation im Bereich Unternehmungsmanagement", ist die Entwicklung eines Tools, das sowohl für das Training von Führungskräften, als auch zum Einsatz in der Hochschulausbildung geeignet ist. Das vorgestellte Planspiel ist internetfähig. Das bietet folgende Potentiale: 1. Höhere Flexibilität: insbesondere hinsichtlich der Zeit- und Ortsgebundenheit des Lernens; 2. Individualisierung des Lernens: mehr Möglichkeiten für den einzelnen Lernenden, den Lernprozess (Lerntempo, Lerninhalte etc.) individuell auf seine Bedürfnisse abzustimmen. 3. Netzwerkbildung: durch Kooperation räumlich verteilter Teilnehmer können soziale, ggf. weltweite Netzwerke entstehen. N2 - The concept of Master Thesis "Development of the Software for Business Management Simulation" presented by Stanislav Belenkiy is targeted for the training of industrial and business managers, as well as university student groups. Newly developed business management simulator can operate via internet. There are the following distinct advantages: 1) Higher flexibility, especially in scheduling and training location; 2) Individual training: tailor-made solutions for the concrete trainee, personal model of simulation, timing and content adjustment; 3) Cooperation between distant participants: emerging of interprofessional and international social networks. KW - Planung KW - Software KW - Simulation KW - Management KW - Marketing KW - simulation software KW - business training KW - decision support KW - social networks KW - FHD KW - Masterthesis Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4257 CY - Düsseldorf ER - TY - GEN T1 - 182 - Evaluationsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik an der Fachhochschule Düsseldorf in der Fassung vom 09.12.2008 N2 - Aufgrund des § 7 Abs. 2 des Gesetzes über die Hochschulen im Land Nordrhein-Westfalen (Hochschulgesetz - HG) vom 1. Januar 2007 hat der Fachbereich Maschinenbau und Verfahrenstechnik der Fachhochschule Düsseldorf die folgende Evaluationsordnung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 182 KW - Evaluationsordnung KW - Maschinenbau KW - Verfahrenstechnik KW - Amtliche Mitteilungen Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4942 CY - Düsseldorf ER - TY - CHAP A1 - Backes, Klaus A1 - Adam, Mario A1 - Münch, Justin A1 - Walter, D. A1 - Wirth, Hans Peter ED - Ostbayerisches Technologie-Transfer-Institut e. V., T1 - Energetischer Vergleich verschiedener Zirkulationseinbindungen bei einer solaren Wärmezentrale mit Frischwasserstation. Posterpräsentation T2 - 27. OTTI Symposium Thermische Solarenergie; Energiewende: Wärme, 10.-12.05.2017, Bad Staffelstein KW - SUW-MFH Y1 - 2017 ER - TY - CHAP A1 - Deckert, Carsten ED - Deckert, Carsten T1 - Nachhaltige Logistik T2 - CSR und Logistik - Spannungsfelder Green Logistics und City-Logistik Y1 - 2016 SN - 978-3-662-46934-7 U6 - https://doi.org/10.1007/978-3-662-46934-7_1 SP - 3 EP - 41 PB - Springer CY - Berlin ER - TY - GEN ED - Deckert, Carsten T1 - CSR und Logistik - Spannungsfelder Green Logistics und City-Logistik Y1 - 2016 U6 - https://doi.org/10.1007/978-3-662-46934-7 PB - Springer CY - Berlin ER - TY - CHAP A1 - Neef, Matthias A1 - aus der Wiesche, Stefan ED - aus der Wiesche, Stefan ED - Joos, Franz T1 - Aufbau und Wirkungsweise von Dampfturbinen BT - Grundlagen, Konstruktion, Betrieb T2 - Handbuch Dampfturbinen KW - Turbinen Y1 - 2018 SN - 978-3-658-20629-1 U6 - https://doi.org/10.1007/978-3-658-20630-7_2 SP - 27 EP - 83 PB - Springer Fachmedien CY - Wiesbaden ER - TY - GEN T1 - 33 - 3. Satzung zur Änderung der Prüfungsordnung für die Bachelor Studiengänge "Produktentwicklung und Produktion" und "Prozess-, Energie- und Umwelttechnik" an der Fachhochschule Düsseldorf vom 01.09.004 N2 - Aufgrund des § 2 Abs. 4 und des § 108 Abs. 2 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 14. März 2000 (GV.NRW S. 190), zuletzt geändert durch Gesetz vom 16. Dezember 2003 (GV. NRW. S. 772), hat die Fachhochschule Düsseldorf die folgende Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 33 KW - Verkündungsblatt KW - Prüfungsordnung KW - Änderung KW - Maschinenbau KW - Verfahrenstechnik KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - MV Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-363 CY - Düsseldorf ER - TY - GEN A1 - Czech, Michael T1 - Finite-Elemente Crashsimulation eines Stoßfängerquerträgers inklusive Crashboxen mittels einer nichtlinearen Kurzzeitanalyse N2 - Die Diplomarbeit beinhaltet die Finite-Elemente-Simulation eines Systems aus Stoßfängerquerträgers und Crashboxen. Durch eine gezielte Deformation sollen diese Elemente einen Teil der Aufprallenergie aufnehmen. In dieser Berechnung prallt das System mit einer hohen Geschwindigkeit auf eine Barriere auf. Dabei entstehen große Verformungen. Die gesamte Simulation spielt sich innerhalb von wenigen Millisekunden ab.Das Problem ist also gekennzeichnet durch die Lösung eines nichtlinearen dynamischen Problems mit großen Verformungen. Das speziell hierfür geeignete explizite Verfahren wurde hierbei verwendet. Dieses Verfahren zeichnet sich gegenüber dem impliziten durch kürzere Berechnungszeiten am Computer aus, vorausgesetzt die Stabilitätsbeschränkungen werden hierbei nicht verletzt. Eine Einführung in die Thematik der Finiten-Elemente-Methode (FEM)ist am Anfang dieser Diplomarbeit gesetzt. Von den Grundlagen der linear-elastischen FEM-Berechnungen erfolgt hiernach die Ausweitung auf nichtlineare FEM-Berechnungen. Materialeigenschaften wie das plastische Verformen (Fließen) oder die zunehmende Verfestigung mit steigender Beanspruchung werden hierbei aufgegriffen und in das FE-Modell eingearbeitet. Die eigentliche Simulation erfolgte in mehreren Schritten. Das System des Stoßfängerquerträgers wurde hierbei in die Komponenten Crashbox und Stoßfängerquerträger aufgeteilt. Die Auslegung der Crashbox erfolgte also getrennt. Es werden mehrere Varianten der Crashbox simuliert, wobei die Maße sowie die Wandstärke als vorgegeben angesehen werden. Die Varianten unterschieden sich in der Form der Falten an der Crashbox, welche eine gezielte Deformation und somit eine effizientere Aufnahme der Aufprallenergie, steuern sollen. Die Auslegung des Stoßfängerquerträgers erfolgte in ähnlicher Weise. In Hinblick auf Materialeinsparungen und Verstärkungen im Bereich vor der Crashbox werden mehrere Varianten gesondert simuliert. Aus den Ergebnissen der vorangehenden Analysen setzte sich schließlich das Gesamtsystem zusammen. Um die Aussagekraft dieser Analysen zu untersuchen wird am Ende der Aufprall des Gesamtsystems auf eine versetzte und deformierbare Barriere simuliert. KW - Finite-Elemente-Methode KW - Crashsimulation KW - nichtlineare Kurzzeitanalyse KW - FHD KW - Diplomarbeit Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-1656 CY - Düsseldorf ER - TY - BOOK A1 - Kiel, Jürgen T1 - Einführung in die elektrische Energie- und Antriebstechnik N2 - Die zunehmende Automatisierung und der sensible Umgang mit (elektrischer) Energie spielen in der gesellschaftlichen Diskussion eine zunehmende Rolle. Die technischen Hintergründe sind hierbei nicht nur für die jeweiligen Experten von Bedeutung, sondern sind auch selbstverständlich Grundlagenwissen im Maschinenbau, in der Verfahrenstechnik und in der Energietechnik. Für genau diese Zielgruppe ist dieses Buch konzipiert. Um eine möglichst große Bandbreite an Themen abzudecken, wurde in vielen Bereichen vereinfacht, verkürzt und verallgemeinert, um zumindest den Kern der jeweiligen Problematik verständlich zu machen. Daher wird auch als Voraussetzung lediglich das Verständnis des elektrischen Kreises mit ohm’schen, induktiven und kapazitiven Verbrauchern erwartet. Außerdem wurde der Spagat zwischen Grundlagen- und Praxiswissen gewagt. KW - Leistungselektronik KW - Drehstrommaschine KW - Frequenzumrichter KW - Maschinenbau KW - Gleichstrommaschine KW - Einführung KW - Transformator KW - Servoregler Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-23945 SN - 978-3-941334-31-1 CY - Düsseldorf ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Diederich, Michael A1 - Gül, Fethi A1 - Benim, Ali Cemal A1 - Heese, Markus A1 - Hamberger, Andreas T1 - Computational and Experimental Investigation of an Industrial Biomass Furnace JF - Chemical Engineering & Technology Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27747 SN - 1521-4125 VL - 43 IS - 8 SP - 1538 EP - 1546 PB - Wiley ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn T1 - Prediction of burning velocity and quenching distance of hydrogen flames JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27790 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - GEN T1 - 81 - Fachbereichsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Fachhochschule Düsseldorf vom 24.10.2005 N2 - Aufgrund § 25, Abs. 4 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) und in Übereinstimmung mit der Grundordnung der Fachhochschule Düsseldorf (GO) hat sich der Fachbereich Maschinenbau und Verfahrenstechnik folgende Fachbereichsordnung gegeben: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 81 KW - Fachbereichsordnung KW - Amtliche Mitteilungen KW - Maschinenbau KW - Verfahrenstechnik KW - Ordnung Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-2578 CY - Düsseldorf ER - TY - GEN T1 - 96 - Zweite Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang Simulation und Experimentaltechnik an der Fachhochschule Düsseldorf vom 08.03.2006 N2 - Aufgrund des § 2 Abs. 4 und des § 94 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 14. März 2000 (GV.NRW S. 190), zuletzt geändert durch Gesetz vom 30. November 2004 (GV. NRW. S. 752), hat die Fachhochschule Düsseldorf die folgende Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 96 KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Maschinenbau KW - Verfahrenstechnik KW - Master KW - Änderung KW - Satzung KW - Prüfungsrecht Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-2585 CY - Düsseldorf ER - TY - GEN T1 - 95 - Dritte Satzung zur Änderung der Studienordnung für den Master-Studiengang Simulation und Experimentaltechnik an der Fachhochschule Düsseldorf vom 08.03.2006 N2 - Aufgrund des § 2 Abs. 4 und des § 108 Abs. 2 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 14. März 2000 (GV.NRW S. 190), zuletzt geändert durch Gesetz vom 30. November 2004 (GV. NRW. S. 752), hat die Fachhochschule Düsseldorf die folgende Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 95 KW - Studienordnung KW - Maschinenbau KW - Verfahrenstechnik KW - Amtliche Mitteilungen KW - Master Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-2556 CY - Düsseldorf ER - TY - GEN T1 - 98 - Studienordnung für den Master Studiengang Simulation und Experimentaltechnik an der Fachhochschule Düsseldorf vom 08.03.2006 N2 - Aufgrund des § 2 Abs. 4 und des § 108 Abs. 2 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 14. März 2000 (GV.NRW S. 190), zuletzt geändert durch Gesetz vom 30. November 2004 (GV. NRW. S. 752), hat die Fachhochschule Düsseldorf die folgende Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 98 KW - Studienordnung KW - Maschinenbau KW - Verfahrenstechnik KW - Amtliche Mitteilungen KW - Master Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-2606 CY - Düsseldorf ER - TY - GEN T1 - 97 - Prüfungsordnung für den Master-Studiengang Simulation und Experimentaltechnik an der Fachhochschule Düsseldorf vom 08.03.2006 N2 - Aufgrund des § 2 Abs. 4 und des § 94 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 14. März 2000 (GV.NRW S. 190), zuletzt geändert durch Gesetz vom 30. November 2004 (GV. NRW. S. 752), hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 97 KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Maschinenbau KW - Verfahrenstechnik KW - Master KW - Prüfungsrecht Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-2597 CY - Düsseldorf ER - TY - GEN T1 - 70 - Studienordnung für den Bachelor-Studiengang Produktentwicklung und Produktion (PP) und den Bachelor-Studiengang Prozess-, Energie- und Umwelttechnik (PEU) an der Fachhochschule Düsseldorf vom 09.08.2005 N2 - Neufassung der Amtlichen Mitteilungen im Verkündungsblatt Nr. 6 Teil 1, Nr. 21 Teil 1 und Nr. 68 T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 70 KW - Studienordnung KW - Bachelor KW - Produktentwicklung KW - PP KW - Maschinenbau KW - PEU KW - Umwelttechnik KW - Amtliche Mitteilungen Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-2636 CY - Düsseldorf ER - TY - JOUR A1 - Deckert, Carsten A1 - Schomaker, Rahel M. T1 - Cultural tightness–looseness and national innovativeness: impacts of tolerance and diversity of opinion JF - Journal of Innovation and Entrepreneurship N2 - The links between innovativeness as a driver of economic performance, and the determinants of innovativeness have been investigated by management scholars and economists for decades, focusing mostly on “hard factors” as investment in research and development, or education. Focusing on a relatively neglected, but in times of globalization even more important aspect, the infuence of cultural characteristics on innovativeness, we apply diferent econometric models to test for links between cultural tightness and looseness on the one hand, and national innovativeness on the other hand. We fnd that cultural tightness—in the sense of homogenous and intolerant societies—has a negative link to national innovativeness, while cultural looseness—in the sense of tolerant and diverse societies—displays a positive link to national innovativeness. KW - DOAJ KW - DEAL KW - Innovation KW - Kultur KW - Toleranz KW - Diversity of opinion Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-36515 SN - 2192-5372 VL - 11 SP - 1 EP - 19 PB - Springer Nature ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Diederich, Michael A1 - Gül, Fethi A1 - Benim, Ali Cemal A1 - Hamberger, Andreas A1 - Heese, Markus T1 - Analysis of combustion, heat and fluid flow in a biomass furnace JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27880 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Bonk, Christian Dirk A1 - Laux, Christoph A1 - Rödder, Maximilian A1 - Neef, Matthias T1 - Design of a 1 KW Organic Rankine Cycle for Teaching and Research Issues JF - Energy Procedia N2 - This paper deals with the design of a micro-scale ORC plant for teaching and research including the development of an automated control concept. The aim is to provide a safe and environmentally acceptable micro-scale heat engine, which can be developed, implemented and used in university labs for the education of students as well as for small research projects. The test rig allows the support of several learning outcomes on a multi-disciplinary level particularly for the implementation and simulation of small power systems. Special attention was given to the organic working fluid characteristics and its selection process. In addition to the above-mentioned performance goals, favourable safety properties and low global warming potential were decisive in the selection of the novel organic fluid called 3M™ Novec™ 649. The performance and the fluid behaviour of Novec 649 in a micro-scale power cycle are of major interest and the research goal for the test rig presented in this paper. Due to the expected power output of 1 kW, a scroll expander was chosen as the generator drive for the micro plant. In order to design the major parts of the ORC, the thermodynamic simulation software EBSILON®Professional was used. The supply temperature was set to 140 °C. As a result of the simulation, feasible expander inlet pressures spread from 5.5 bar to 8.5 bar. This leads to thermal efficiencies of the ORC in the order of 5 %. Adding a recuperator to the cycle system decreases the operating pressure range but in the end, the thermal efficiency can be increased by 1.5 %-points up to 6.2 %. Finally, an automated control concept is introduced, where the pump is controlled via the fill level measurement system. KW - EBSILON®Professional KW - Micro-Scale ORC Plant KW - Teaching KW - Research KW - Automated Control Concept Y1 - 2017 U6 - https://doi.org/10.1016/j.egypro.2017.09.117 VL - 129 SP - 931 EP - 938 PB - Elsevier ER - TY - CHAP A1 - Becker, Martin A1 - Lippel, Jens A1 - Stuhlsatz, André T1 - Regularized Nonlinear Discriminant Analysis - An Approach to Robust Dimensionality Reduction for Data Visualization T2 - Proceedings of the 12th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications, 27.02.2017 - 01.03.2017, Porto, Portugal Y1 - 2017 SN - 978-989-758-228-8 U6 - https://doi.org/10.5220/0006167501160127 SP - 116 EP - 127 PB - SCITEPRESS - Science and Technology Publications ER - TY - JOUR A1 - Nolting, Lars A1 - Spiegel, Thomas A1 - Reich, Marius A1 - Adam, Mario A1 - Praktiknjo, Aaron T1 - Can energy system modeling benefit from artificial neural networks? Application of two-stage metamodels to reduce computation of security of supply assessments JF - Computers & Industrial Engineering KW - KIVi Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-26979 SN - 0360-8352 VL - 142 PB - Elsevier ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Özman, Cansu A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - Variable temperature effects on TEG performance JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27893 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - CHAP A1 - Backes, Klaus A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Faber, Christian A1 - Henneböhl, Fred. A1 - Lanz, Marco A1 - Anthrakidis, Anette T1 - KWKK-Anlagen im Feldtest: Verbesserung ihrer Regelung und Hydraulik T2 - Deutsche Kälte-Klima-Tagung 2011, 16.-18.11.2011, Aachen KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW - 2 Y1 - 2011 UR - https://zies.hs-duesseldorf.de/forschung-und-entwicklung/erneuerbare-energien/Projekte_e2/Documents/KWKK2.pdf CY - Aachen ER - TY - GEN A1 - Fischer, Andreas T1 - Entwicklung, Erprobung und Inbetriebnahme einer automatisierten Montageeinheit einschließlich der Teilezuführung N2 - Thema der Diplomarbeit ist die Entwicklung, Erprobung und Inbetriebnahme einer automatisierten Montageeinheit einschließlich der Teilezuführung. Die Arbeit wird im Rahmen der "projektbezogene Konstruktionsausbildung" an einer Anlage in der Fachhochschule Düsseldorf durchgeführt. Die Anlage stellt eine Fertigungszelle dar, bei der ein Rundling mit einem Kunststoffstopfen versehen wird und anschließend eine Qualitätskontrolle mit Bildverarbeitung durchläuft. Ziel der Diplomarbeit ist es, anhand eines Projektes, den Ablauf und die Vorgehensweise des methodischen Konstruierens zur Lösung eines Problems zu erarbeiten. Darunter fallen das funktions- und systemorientierte Konstruieren, die Planung und Durchführung von Versuchen im Entwicklungsablauf und die Lieferantenfragen. KW - Konstruktionslehre KW - Mechanik KW - automatisierte Montageeinheit KW - Diplomarbeit KW - MV Y1 - 1999 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-19 CY - Düsseldorf ER - TY - GEN A1 - Sarkhoch, René T1 - Optimierte Griffwahl an Bauteilen durch Einsatz von verschiedenen Bildverarbeitungsalgorithmen an einer flexiblen Sortieranlage N2 - Es werden verschiedene Ansätze einer teileorientierten Griffwahl analysiert und bewertet. N2 - Different approaches for a part oriented grasp choice are analysed and evaluated. T2 - Optimized choice of grasp on parts at a flexible sorting device with different vision control algorithmus KW - Griffwahl KW - Roboter KW - Handhabung KW - Diplomarbeit KW - Teile KW - grasp KW - grip KW - handling KW - robot KW - FHD KW - FHDauto Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-225 CY - Düsseldorf ER - TY - GEN T1 - 69 - Prüfungsordnung für den Bachelor-Studiengang Produktentwicklung und Produktion (PP) und den Bachelor-Studiengang Prozess-, Energie- und Umwelttechnik (PEU) an der Fachhochschule Düsseldorf vom 09.08.2005 N2 - Neufassung der Amtlichen Mitteilungen im Verkündungsblatt Nr. 6, Nr. 21, Nr. 33 und Nr. 67 T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 69 KW - Prüfungsordnung KW - Bachelor KW - PP KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - Maschinenbau Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-1903 CY - Düsseldorf ER - TY - GEN T1 - 67 - Vierte Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang Produktentwicklung und Produktion (PP) und für den Bachelor-Studiengang Prozess-, Energie- und Umwelttechnik (PEU) an der Fachhochschule Düsseldorf vom 09.08.2005 N2 - Aufgrund des § 2 Abs. 4 und des § 94 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 14. März 2000 (GV.NRW S. 190), zuletzt geändert durch Gesetz vom 30. November 2004 (GV. NRW. S. 752), hat die Fachhochschule Düsseldorf die folgende Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 67 KW - Prüfungsordnung KW - PEU KW - PP KW - Amtliche Mitteilungen KW - MV KW - Prüfungsrecht KW - Bachelor Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-1887 CY - Düsseldorf ER - TY - GEN T1 - 68 - Zweite Satzung zur Änderung der Studienordnung für den Bachelor-Studiengang Produktentwicklung und Produktion (PP) und für den Bachelor-Studiengang Prozess-, Energie- und Umwelttechnik (PEU) an der Fachhochschule Düsseldorf vom 09.08.2005 N2 - Aufgrund des § 2 Abs. 4 und des § 86 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 14. März 2000 (GV.NRW S. 190), zuletzt geändert durch Gesetz vom 30. November 2004 (GV. NRW. S. 752), hat die Fachhochschule Düsseldorf die folgende Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 68 KW - Studienordnung KW - PP KW - Amtliche Mitteilungen KW - Bachelor KW - Änderung KW - Prüfungsrecht Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-1892 CY - Düsseldorf ER - TY - RPRT A1 - Deckert, Carsten A1 - Schomaker, Rahel M. A1 - Knappitsch, Eithne T1 - Culture and Entrepreneurship: The Political, Social and Individual Influences on Opportunity Entrepreneurs N2 - The impact of culture on entrepreneurship is a widely accepted phenomenon. Cultural factors influence entrepreneurship via different mechanisms on the macro-, meso-, and micro-level of a country. Building on existing research, we draw a clear link between national cultural dimensions and entrepreneurship, using a new model that arranges different cultural dimensions in groups based on their particular function: political, social, or individual (PSI-model) and that distinguishes between values and practices where relevant. The PSI-model provides a coherent theoretical framework on which different cultural dimensions and their impact on entrepreneurship can be analysed, allowing for particular attention to be drawn to social practices and social values. This paper contributes to a better understanding of the relationship between culture and entrepreneurship, providing empirical evidence of how specific cultural dimensions influence entrepreneurship. The findings are of relevance from a policy perspective and can be used to generate practical recommendations for national institutions interested in promoting entrepreneurship and entrepreneurial activities. The findings are also transferable to other fields related to national cultural dimensions such as level of innovation, investment, budgeting etc. T3 - Working Papers in Industrial Engineering - 3 KW - Entrepreneurship KW - Cultural Dimensions KW - National Culture KW - PSI Model Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-23837 SN - 2627-8375 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - CHAP A1 - Friedrich, Linus A1 - Lyssakow, Pawel A1 - Pearce, Garth A1 - Ruess, Martin A1 - Bisagni, Chiara A1 - Schröder, Kai-Uwe ED - Papadrakakis, Manolis ED - Papadopoulos, V. ED - Stefanou, G. ED - Plevris, V. T1 - ON THE STRUCTURAL DESIGN OF IMPERFECTION SENSITIVE LAMINATED COMPOSITE SHELL STRUCTURES SUBJECTED TO AXIAL COMPRESSION T2 - Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), 05.06.2016 - 10.06.2016, Crete Island KW - composite shells KW - imperfection sensitivity KW - Shell buckling Y1 - 2016 UR - http://www.eccomasproceedia.org/conferences/eccomas-congresses/eccomas-congress-2016 SN - 978-618-82844-0-1 U6 - https://doi.org/10.7712/100016.1951.5838 SP - 2182 EP - 2189 PB - Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA) Greece CY - Athens ER - TY - GEN T1 - 77 - Erste Satzung zur Änderung der Fachbereichsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik an der Fachhochschule Düsseldorf vom 24.10.2005 N2 - Aufgrund des § 25 Abs. 4 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz – HG) vom 14. März 2000, zuletzt geändert durch Gesetz vom 30. November 2004 und in Verbindung mit der Grundordnung der Fachhochschule Düsseldorf (GO) vom 21. Juni 2001, zuletzt geändert durch Änderungssatzung vom 14. März 2003, hat der Fachbereich Maschinenbau und Verfahrenstechnik folgende Änderungssatzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 77 KW - Satzung KW - Fachbereichsordnung KW - Änderung KW - Maschinenbau KW - Verfahrenstechnik KW - Amtliche Mitteilungen Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-2120 CY - Düsseldorf ER - TY - GEN T1 - 204 - Prüfungsordnung für den dualen Bachelor-Studiengang "Produktentwicklung und Produktion dual" (PPD)der Fachhochschule Düsseldorf vom 20.05.2009 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 204 KW - Prüfungsordnung KW - Dualer Bachelor-Studiengang KW - Produktentwicklung und Produktion KW - PPD KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - Bachelor Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-5438 CY - Düsseldorf ER - TY - GEN T1 - 211 - Prüfungsordnung für den Bachelor-Studiengang Wirtschaftsingenieur Maschinenbau" (WIM) an der Fachhochschule Düsseldorf vom 14.09.2009 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 211 KW - Änderung KW - Prüfungsordnung KW - Maschinenbau KW - Bachelor KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-5803 CY - Düsseldorf ER - TY - GEN T1 - 203 - Genehmigung des Dualen Bachelor-Studiengangs "Produktentwicklung und Produktion"(PPD) an der Fachhochschule Düsseldorf vom 20.05.2009 N2 - Aufgrund des § 2 Absatz 2 und 4 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung genehmige ich den T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 203 KW - Genehmigung KW - Dualer Bachelor KW - Produktentwicklung und Produktion KW - PPD KW - Amtliche Mitteilungen KW - Bachelor Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-5423 CY - Düsseldorf ER - TY - GEN T1 - 206 - Prüfungsordnung für die Bachelor-Studiengänge “Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Fachhochschule Düsseldorf vom 19.06.2009 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 206 KW - Prüfungsordnung KW - Bachelor KW - Produktentwicklung und Produktion KW - Prozess-, Energie- und Umwelttechnik KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-5521 CY - Düsseldorf ER - TY - GEN T1 - 245 - Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Fachhochschule Düsseldorfvom 20.12.2010 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 245 KW - Maschinenbau und Verfahrenstechnik KW - Prüfungsordnung KW - Prüfungsrecht KW - Amtliche Mitteilungen KW - Master Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-6560 CY - Düsseldorf ER - TY - GEN T1 - 208 - Prüfungsordnung für den Master-Studiengang “Simulation und Experimentaltechnik“ an der Fachhochschule Düsseldorf vom 19.06.2009 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 208 KW - Prüfungsordnung KW - Master KW - Simulation und Experimentaltechnik KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-5541 CY - Düsseldorf ER - TY - GEN T1 - 205 - Vierte Satzung zur Änderung der Prüfungsordnung (Studiengangsspezifische Bestimmungen) für die Bachelor-Studiengänge »Produktentwicklung und Produktion«und »Prozess-, Energie- und Umwelttechnik« an der Fachhochschule Düsseldorf vom 19.06.2009 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Änderungsatzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 205 KW - Änderung KW - Prüfungsordnung KW - Produktentwicklung und Produktion KW - Prozess-, Energie- und Umwelttechnik KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - Bachelor Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-5510 CY - Düsseldorf ER - TY - GEN T1 - 207 - Vierte Satzung zur Änderung der Prüfungsordnung (Studiengangsspezifische Bestimmungen) für den Master-Studiengang "Simulation und Experimentaltechnik" an der Fachhochschule Düsseldorf vom 19.06.2009 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Änderungsatzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 207 KW - Änderung KW - Prüfungsordnung KW - Master KW - Simulation und Experimentaltechnik KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-5531 CY - Düsseldorf ER - TY - GEN T1 - 243 - Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Fachhochschule Düsseldorf vom 16.09.2010 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 243 KW - Prüfungsordnung KW - Prüfungsrecht KW - Amtliche Mitteilungen KW - Bachelor KW - Wirtschaftsingenieur KW - Maschinenbau Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-6420 CY - Düsseldorf ER - TY - CHAP A1 - Lorenzen, Finn A1 - Schönig, Felix A1 - Grote-Ramm, Wolfgang A1 - Oliveira Brito, Marcel A1 - Neuberger, Heiko A1 - Sobolyev, Alexander T1 - Continual Adaptation of Compressor Maps During Operation on Measurement Data For Increased Performance of Model-Based Applications in Turbomachinery T2 - ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, June 26–30, 2023 Boston, Massachusetts, USA N2 - Higher control engineering concepts, including artificial intelligence and model-based control, are recently becoming more popular in complex industrial applications because they enable a significant increase in efficiency. E.g., a model-based approach can be used to enhance the control and monitoring of several coupled components of a larger turbomachinery train. This requires dynamic models of the components, including all machine characteristics, which may experience a shift in their behavior over the course of their lifetime. Such changes occur due to natural fouling, wear of sub-components or external effects induced by maintenance measures. To overcome this problem, we model machine-characteristic maps with artificial neural networks, which may be used as part of prediction models in a model predictive control unit. If an appropriate data set is available, this allows us to adapt the model to the current behavior of the machine without requiring in-depth knowledge about the underlying physics of this “concept drift”, as it is known in literature. However, the training of neural networks is usually connected with high computational effort while the task needs to be executed in real-time during operation. Furthermore, in real operating conditions, machine sensors can only provide labeled data from the current operating point of the machine, which can be stationary for long operation periods of up to several months. In general, this yields only an unrepresentative data subset of the machine-characteristics, which is not sufficient to retrain the whole model to a new state. To solve these problems, we firstly reduce the model adaptation to a convex optimization problem, which can be efficiently solved in real-time conditions. Secondly, we use a specialized data management system with which we can integrate historical data to supplement the unrepresentative data subset. In this paper we show the application of the outlined method on a compressor map and discuss the advantages and requirements of the method in the context of modeling applications for industrial turbomachinery. KW - compressors KW - Intelligent control KW - Neural networks KW - Modeling Y1 - 2023 SN - 978-0-7918-8697-7 U6 - https://doi.org/10.1115/GT2023-103458 VL - Volume 4 SP - 1 EP - 7 PB - ASME CY - Boston ER - TY - JOUR A1 - Grote-Ramm, Wolfgang A1 - Lanuschny, David A1 - Lorenzen, Finn A1 - Oliveira Brito, Marcel A1 - Schönig, Felix T1 - Continual learning for neural regression networks to cope with concept drift in industrial processes using convex optimisation JF - Engineering Applications of Artificial Intelligence N2 - Process models in industrial applications, e.g. predictive maintenance or automation, are subject to both divergence from the underlying system due to their time-variant nature and to high complexity resulting from a wide operational range being covered. Hence, regression models require high accuracy for the present system state and at the same time need to be valid across the whole system operating space. While accuracy for the current system state can be gained by updating the model on the current data, the overall validity must often be retrieved from historical or design data. We propose a method to find an appropriate compromise for these two demands. A pre-trained artificial neural network (ANN) is continually updated on the current sensor data stream using convex optimisation. Thus, a unique and optimal solution is generated in each update step, while robust regression accuracy on the domain that is not covered by the arriving data subset is maintained. This is achieved by introducing a data management system to provide some historical data, constraining the optimisation problem and manipulating the architecture of the ANN. Models updated with this method show reasonable stability but display plastic behaviour at the current operating point. KW - Continual learning KW - Concept drift KW - Catastrophic forgetting KW - Convex optimization Y1 - 2023 U6 - https://doi.org/10.1016/j.engappai.2023.105927 SN - 1873-6769 VL - 120 PB - Elsevier CY - New York ER - TY - JOUR A1 - Jost, Michael A1 - Grote, Wolfgang A1 - Möllenbruck, Florian A1 - Mönnigmann, Martin T1 - Plant-wide control of a parabolic trough power plant with thermal energy storage JF - IFAC Proceedings Volumes N2 - We present a control scheme for a parabolic trough power plant that is equipped with a molten salt thermal energy storage system. We show that the multivariable control problem for the solar field can be decoupled by controlling the three way valve that splits the heat transfer fluid between the storage system and the steam generator. The steam generation cycle is regulated with inlet pressure control. The subsystems of the plant are modeled based on first principles, where we focus on the steam generation cycle. A multi-group extraction turbine with pre- and reheater is considered, which is suitable for solar power plants. We demonstrate the benefits of the proposed control scheme with a day-to-day simulation. KW - Control of power plants KW - Solar power plants KW - Thermal energy storage KW - Decoupling control Y1 - 2014 U6 - https://doi.org/10.3182/20140824-6-ZA-1003.00879 SN - 2589-3653 VL - 47 IS - 3 SP - 419 EP - 425 PB - Elsevier ER - TY - JOUR A1 - Grote, Wolfgang A1 - Kastsian, Darya A1 - Mönnigmann, Martin T1 - Guaranteed stability in optimal power generation dispatching under uncertainty JF - IEEE Transactions on Power Systems N2 - Stability and cost optimality of power generation and supply systems must not be considered independently from one another. Simple examples show that optimizing cost without considering stability may result in modes of operation that, while economically optimal, are unstable. We demonstrate that stability, robustness, and optimality can be considered systematically and simultaneously by combining bifurcation theory and nonlinear optimization. Essentially, the proposed method enforces a backoff distance between the optimal point of operation and operational or stability boundaries in the space of the optimization variables, where bifurcation theory is used to describe nonlinear stability boundaries. KW - Normal vector method KW - Power dispatch KW - Robust optimization KW - Stability KW - Unit commitment Y1 - 2013 U6 - https://doi.org/10.1109/TPWRS.2012.2207970 SN - 1558-0679 VL - 28 IS - 2 SP - 1103 EP - 1112 PB - IEEE ER - TY - JOUR A1 - Mier, Dominik A1 - Möllenbruck, Florian A1 - Jost, Michael A1 - Grote, Wolfgang A1 - Mönnigmann, Martin T1 - Model predictive control of the steam cycle in a solar power plant JF - IFAC-PapersOnLine N2 - We derive a nonlinear model of the steam cycle of a solar power plant, estimate its unknown parameters with measured data, and design a linear model predictive controller based on the resulting model. Simulations show that the linear model predictive controller is able to regulate the electrical power of the nonlinear steam process of the plant to a given reference trajectory very well. Moreover, it results in very good disturbance rejection. KW - Power plant control KW - solar power KW - model predictive control Y1 - 2015 U6 - https://doi.org/10.1016/j.ifacol.2015.09.052 SN - 2405-8963 VL - 48 IS - 8 SP - 710 EP - 715 PB - Elsevier ER - TY - CHAP A1 - Grote-Ramm, Wolfgang A1 - Schönig, Felix T1 - Model Predictive Control of Solar Receivers T2 - 25th Cologne Solar Colloquium (DLR) Y1 - 2022 UR - https://www.dlr.de/sf/PortalData/73/Resources/dokumente/soko/soko2022/DLR_Solar_Colloquium_2022_Model_Predictive_Control_GROTE-RAMM.pdf ER - TY - CHAP A1 - Grote, Wolfgang A1 - Kastsian, Darya A1 - Mönnigmann, Martin T1 - Optimal power system unit commitment with guaranteed local stability T2 - Proceedings of the 2011 American Control Conference N2 - This article deals with the cost optimal commitment of power systems. System stability is often only considered after solving the commitment problem. We show by example that a cost optimization may result in a mode of operation that, while economically optimal, is unstable or has otherwise unacceptable dynamics. As a remedy, we propose to use the so-called normal vector method, which has been developed for the optimization of nonlinear dynamical systems with stability boundaries and uncertain parameters. We apply the method to a small sample power grid, where the optimization goal is to minimize the energy production costs for a given power consumption. KW - Optimization KW - Power system stability KW - Robustness Y1 - 2011 U6 - https://doi.org/10.1109/ACC.2011.5991058 SN - 2378-5861 SP - 4526 EP - 4531 PB - IEEE ER - TY - CHAP A1 - Grote, Wolfgang A1 - Reinig, Gunter T1 - Modellbasierte Regelung von Entnahmedampfturbinen (eingeladener Vortrag) T2 - 43. Regelungstechnisches Kolloquium in Boppard vom 25.-27. Februar 2009 KW - Modellierung von Dampfturbinen KW - Modellprädiktive Regelung KW - Generische Modelle KW - MIMO Regelung KW - Betriebsartenspezifische Regelung Y1 - 2009 UR - https://www.iosb.fraunhofer.de/content/dam/iosb/iosbtest/documents/veranstaltungen/boppard-regelungstechnisches-kolloquium/Programm_2009.pdf ER - TY - JOUR A1 - Uffmann, Kai A1 - Abicht, Claus A1 - Grote, Wolfgang A1 - Quick, Harald H. A1 - Ladd, Mark E. T1 - Design of an MR-compatible piezoelectric actuator for MR elastography JF - Concepts in Magnetic Resonance Part A: Bridging Education and Research N2 - Magnetic Resonance (MR) elastography is a method for measuring tissue elasticity via phase images acquired with an MR scanner. The propagation of periodic mechanical waves through the tissue can be captured by means of a modified phase contrast sequence. These waves are generated with a mechanical oscillator (actuator) and coupled into the tissue through the skin. The actuator must be capable of generating a sinusoidal excitation with excellent phase and amplitude stability, while not disturbing the MR imaging process. In this work, an actuator based on a piezoelectric principle was developed. Based on the imaging evaluation of several material samples, the housing for the piezoelectric ceramic was constructed of aluminum. Smaller parts of the housing were manufactured from brass and titanium to fulfill the mechanical constraints. A lever was used to transfer the oscillation generated by the piezoelectric ceramic to the point of excitation. The lever amplifies the piezoelectric motion, allowing for a more compact design. Three different lever designs were characterized by an acceleration sensor both outside and inside the magnet. It was shown that the rigidity of the lever, as determined by its material and form, was decisive in determining the resonant frequency of the system and therefore the maximum practical frequency of operation. It was also shown that the motion of the oscillator is unaffected by the electromagnetic fields of the MR imager. The final design can be placed directly in the magnet bore within a few centimeters of the tissue volume to be imaged without generating significant artifacts. An amplitude range of 0–1 mm in the frequency range from 0 to over 300 Hz was achieved, sufficient for performing most MR elastography applications. © 2002 Wiley Periodicals, Inc. Concepts in Magnetic Resonance (Magn Reson Engineering) 15: 239–254, 2002 KW - Elasticity KW - Elastography KW - Actuator KW - MRI KW - Piezoelectric Y1 - 2002 UR - 1552-5023 U6 - https://doi.org/https://doi.org/10.1002/cmr.10045 VL - 15 IS - 4 SP - 239 EP - 254 PB - Wiley ER - TY - JOUR A1 - Beyer, Marc-André A1 - Grote, Wolfgang A1 - Reinig, Gunter T1 - Adaptive exact linearization control of batch polymerization reactors using a Sigma-Point Kalman Filter JF - Journal of Process Control N2 - The Chylla–Haase polymerization reactor is widely accepted as a benchmark process for the evaluation of control strategies for batch reactors. In this contribution a control concept based on Exact I/O-Linearization is proposed and compared to a conventional cascade control structure. In order to adapt the exact linearization control strategy to various polymerization products and batch conditions, an advanced probabilistic inference algorithm (Sigma-Point Kalman Filter) is applied and investigated. Sigma-Point Kalman Filters have the major improvement of simplified implementation compared to local linearization methods (i.e. Extended Kalman Filter) because no analytical Jacobians are required. Stochastic simulation studies are introduced and show the effectiveness, accuracy and benefit of the control concept. Within several scenarios a satisfying robustness against structural errors in the underlying model equations for the nonlinear control law and the inference algorithm is demonstrated. Furthermore it is pointed out, that with little effort in reassembling the plant design, control performance can be improved significantly. KW - Batch process operation KW - Exact I/O-Linearization control KW - Online parameter estimation KW - Sigma-Point Kalman Filter Y1 - 2008 UR - 1873-2771 U6 - https://doi.org/10.1016/j.jprocont.2007.12.002 VL - 18 IS - 7-8 SP - 663 EP - 675 PB - Elsevier ER - TY - CHAP A1 - Grote-Ramm, Wolfgang A1 - Schönig, Felix A1 - Schwarzbözl, Peter A1 - Drexelius, Maximilian A1 - Maldonado Quinto, Daniel A1 - Binder, Matthias T1 - Model Predictive Control and Service Life Monitoring for Molten Salt Solar Power Towers T2 - 29th SolarPACES Conference, Sydney N2 - A two-component system for control and monitoring of solar power towers with molten salt receivers is proposed. The control component consists of a model predictive control applica-tion (MPC) with a flexible objective function and on-line tunable weights, which runs on a In-dustrial PC and uses a reduced order dynamic model of the receiver’s thermal and flow dy-namics. The second component consists of a service-life monitoring unit, which estimates the service-life consumption of the absorber tubes depending on the current mode of operation based on thermal stresses and creep fatigue in the high temperature regime. The calculation of stresses is done based on a detailed finite element study, in which a digital twin of the re-ceiver was developed. By parallelising the model solver, the estimation of service-life con-sumption became capable of real-time operation. The system has been implemented at a test facility in Jülich, Germany, and awaits field experiments. In this paper, the modeling and archi-tecture are presented along simulation results, which were validated on a hardware-in-the-loop test bench. The MPC showed good disturbance rejection while respecting process variable constraints during the simulation studies. KW - Solar Power Tower KW - Molten Salt KW - Model Predictive Control KW - Dynamic Modelling KW - Service-life Monitoring Y1 - 2023 N1 - Eingereichter Beitrag ER - TY - CHAP A1 - Grote, Wolfgang A1 - Schulze Darup, M. A1 - Reinig, G. T1 - Modellprädiktive Regelung von Entnahmeturbinen und Dampfnetzen (Poster) T2 - Chemie Ingenieur Technik Y1 - 2009 U6 - https://doi.org/10.1002/cite.200950184 VL - 2009 IS - 8 SP - 1113 EP - 1114 PB - Wiley CY - Weinheim ER - TY - JOUR A1 - Ali, R. A1 - Farooq, A. A1 - Shahzad, A. A1 - Benim, Ali Cemal A1 - Iqbal, A. A1 - Razzaq, M. T1 - Computational approach on three-dimensional flow of couple-stress fluid with convective boundary conditions JF - Physica A: Statistical Mechanics and its Applications Y1 - 2022 U6 - https://doi.org/10.1016/j.physa.2019.124056 SN - 0378-4371 VL - 553 PB - Elsevier ER - TY - JOUR A1 - Mabrouk, Riheb A1 - Benim, Ali Cemal A1 - Naji, Hassane A1 - Dhahri, Hacen T1 - Investigation of Pulsed Flow Effects on the Phase Change Within an Open-Cell Metal Foam Using Thermal Lattice Boltzmann Method JF - Transport in Porous Media KW - Thermal lattice Boltzmann method KW - Energetic and exergetic efficiencies KW - Local thermal non-equilibrium KW - Solidification process KW - Melting KW - Porous media KW - Pulsating flow Y1 - 2023 U6 - https://doi.org/10.1007/s11242-023-01903-x SN - 0169-3913 VL - 147 IS - 2 SP - 225 EP - 257 PB - Springer Nature ER - TY - JOUR A1 - Queval, Loic A1 - Coty, Alain A1 - Vido, Lionel A1 - Gottkehaskamp, Raimund A1 - Multon, Bernard T1 - A Switched Reluctance Motor Drive Using Photovoltaic Transistors: Principle, Prototype, Experimental, and Numerical Results JF - IEEE Transactions on Industry Applications Y1 - 2017 U6 - https://doi.org/10.1109/TIA.2017.2718493 SN - 0093-9994 VL - 53 IS - 5 SP - 4886 EP - 4893 PB - IEEE ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal T1 - Computational investigation of heat transfer enhancement by alternating inclined ribs in tubular heat exchanger JF - Progress in Computational Fluid Dynamics KW - CFD KW - forced convection KW - transitional turbulence KW - inclined ribs KW - heat transfer enhancement Y1 - 2017 U6 - https://doi.org/10.1504/PCFD.2017.088818 SN - 1468-4349 VL - 17 IS - 6 SP - 390 EP - 396 PB - Inderscience Enterprises Limited ER - TY - JOUR A1 - Farooq, Asma A1 - Ali, Ramzan A1 - Benim, Ali Cemal T1 - Soret and Dufour effects on three dimensional Oldroyd-B fluid JF - Physica A: Statistical Mechanics and its Applications Y1 - 2018 U6 - https://doi.org/10.1016/j.physa.2018.02.204 SN - 0378-4371 VL - 503 SP - 345 EP - 354 PB - Elsevier ER - TY - JOUR A1 - Biswas, Nirmalendu A1 - Mandal, Dipak Kumar A1 - Manna, Nirmal K. A1 - Benim, Ali Cemal T1 - Enhanced energy and mass transport dynamics in a thermo-magneto-bioconvective porous system containing oxytactic bacteria and nanoparticles: cleaner energy application JF - Energy Y1 - 2023 U6 - https://doi.org/10.1016/j.energy.2022.125775 SN - 0360-5442 VL - 263 IS - B PB - Elsevier ER - TY - JOUR A1 - Grote-Ramm, Wolfgang A1 - Lanuschny, David A1 - Lorenzen, Finn A1 - Brito, Marcel Oliveira A1 - Schoenig, Felix T1 - Continual learning for neural regression networks to cope with concept drift in industrial processes using convex optimisation JF - Engineering Applications of Artificial Intelligence Y1 - 2022 U6 - https://doi.org/10.1016/j.engappai.2023.105927 SN - 0952-1976 VL - 120 PB - Elsevier ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Benim, Ali Cemal A1 - Pathak, Manabendra A1 - Chamoli, Sunil A1 - Gupta, Ashutosh T1 - Thermohydraulic characteristics of inline and staggered angular cut baffle inserts in the turbulent flow regime JF - Journal of Thermal Analysis and Calorimetry Y1 - 2020 U6 - https://doi.org/10.1007/s10973-019-09094-8 SN - 1388-6150 VL - 140 IS - 3 SP - 1519 EP - 1536 PB - Springer Nature ER - TY - JOUR A1 - Laux, Christoph A1 - Gotter, Andreas A1 - Eckert, Frank A1 - Neef, Matthias T1 - Experimental results of a low-pressure steam Rankine cycle with a novel water lubricated radial inflow turbine for the waste heat utilization of internal combustion engines JF - Energy Conversion and Management Y1 - 2022 U6 - https://doi.org/10.1016/j.enconman.2022.116265 SN - 0196-8904 VL - 271 PB - Elsevier ER - TY - JOUR A1 - Nebel, Janine A1 - Schmidt, Stefan A1 - Pan, Qiushi A1 - Lotz, Katrin A1 - Kaluza, Stefan A1 - Muhler, Martin T1 - On the role of cobalt carbidization in higher alcohol synthesis over hydrotalcite-based Co-Cu catalysts JF - Chinese Journal of Catalysis Y1 - 2019 U6 - https://doi.org/10.1016/S1872-2067(19)63344-9 SN - 1872-2067 N1 - The research project is funded by the Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung, BMBF, Verbundvorhaben Carbon2Chem®, FKZ: 03EK3041). VL - 40 IS - 11 SP - 1731 EP - 1740 PB - Elsevier ER - TY - JOUR A1 - Anton, Johan A1 - Nebel, Janine A1 - Göbel, Christoph A1 - Gabrysch, Thomas A1 - Song, Huiqing A1 - Froese, Christian A1 - Ruland, Holger A1 - Muhler, Martin A1 - Kaluza, Stefan T1 - CO Hydrogenation to Higher Alcohols over Cu–Co-Based Catalysts Derived from Hydrotalcite-Type Precursors JF - Topics in Catalysis Y1 - 2016 UR - https://doi.org/10.1007/s11244-016-0663-2 U6 - https://doi.org/10.1007/s11244-016-0663-2 VL - 59 IS - 15-16 SP - 1361 EP - 1370 PB - Springer Nature ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Benim, Ali Cemal A1 - Chattopadhyay, Himadri A1 - Banerjee, Arnab T1 - Experimental investigation of heat transfer performance of corrugated tube with spring tape inserts JF - Experimental Heat Transfer Y1 - 2019 U6 - https://doi.org/10.1080/08916152.2018.1531955 SN - 0891-6152 VL - 32 IS - 5 SP - 411 EP - 425 PB - Taylor & Francis ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Canal, Cansu Deniz A1 - Boke, Yakup Erhan T1 - Computational investigation of oxy-combustion of pulverized coal and biomass in a swirl burner JF - Energy Y1 - 2022 U6 - https://doi.org/10.1016/j.energy.2021.121852 SN - 0360-5442 VL - 238 IS - C PB - Elsevier ER - TY - JOUR A1 - Basaran, Anil A1 - Benim, Ali Cemal A1 - Yurddas, Ali T1 - Numerical Simulation of the Condensation Flow of the Isobutane (R600a) inside Microchannel JF - Heat Transfer Engineering Y1 - 2021 U6 - https://doi.org/10.1080/01457632.2021.1874668 SN - 0145-7632 VL - 43 IS - 3-5 SP - 337 EP - 361 PB - Taylor & Francis ER - TY - JOUR A1 - Keshavanarayana, Pradeep A1 - Ruess, Martin A1 - de Borst, René T1 - A feedback-loop extended stress fiber growth model with focal adhesion formation JF - International Journal of Solids and Structures Y1 - 2017 U6 - https://doi.org/10.1016/j.ijsolstr.2017.08.023 SN - 0020-7683 N1 - Open Archive VL - 128 SP - 160 EP - 173 PB - Elsevier ER - TY - JOUR A1 - Pfeiffelmann, Bjorn A1 - Ozman, Cansu A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - Analysis of the effect of nonuniform surface temperature distribution on the performance of a thermoelectric generator JF - Sustainable Energy Technologies and Assessments Y1 - 2022 U6 - https://doi.org/10.1016/j.seta.2022.102375 SN - 2213-1388 VL - 53 IS - A PB - Elsevier ER - TY - CHAP A1 - Gottschald, Joans T1 - Data Driven Model Predictive Control of a District Heating Network T2 - Smart Energy Systems International Conference 2021, 21.09.2021, KW - BestHeatNet Y1 - 2021 CY - Düsseldorf ER - TY - CHAP A1 - Adam, Mario T1 - Künstliche Intelligenz zur Betriebsoptimierung eines Nahwärmenetzes in Kempen mit verschiedenen regenerativen Energiequellen T2 - Berliner Energietage, 22. April 2021, Berlin KW - BestHeatNet Y1 - 2021 CY - Düsseldorf ER - TY - CHAP A1 - Jäger, Lukas A1 - Hart, Scott A1 - Reguera, Remo A1 - Grote-Ramm, Wolfgang A1 - Neef, Matthias T1 - Autonome Nachführungssteuerung eines Parabolrinnen-Teststands mittels Microcontroller T2 - Beitrag zur 7. Regenerativen Energietechnik Konferenz, Nordhausen, 08. - 09. Februar 2024 N2 - Parabolrinnen nutzen parabolisch gekrümmte Spiegel, um die direkte Globalstrahlung auf ein Vakuum-Absorberrohr zu konzentrieren. Eine Effizienzsteigerung dieser Technologie wird durch eine vollständige Automatisierung der Sonnennachführung optimiert. Die an einem Parabolrinnen-Versuchsträger der Hochschule Düsseldorf realisierte Steuerung und Berechnung der Nachführung werden kontinuierlich über einen Microcontroller realisiert. Eine Kalibrierung der Parabolrinne im Labormaßstab zur Erkennung des Winkels erfolgt über Infrarotsensoren. Die Berechnung des Sonnenstandes, durch den Algorithmus, kann unabhängig von einer Stromzufuhr durch eine Real-Time-Clock bestimmt werden. Mittels Schrittmotor und Treiber verfährt die Parabolrinne in die errechnete Position. Die Feinausrichtung der Parabolrinne erfolgt über ein Verschattungsmodul und zwei Photowiderstände. Durch den Einsatz von 3D-gedruckten Bestandteilen sind die genutzten Komponenten kostengünstig und können standortunabhängig reproduziert werden. Durch das Zusammenspiel der Komponenten ist ein autonomer Einsatz möglich. KW - Parabolrinnen KW - Sonnenenergie KW - Microcontroller Y1 - 2024 CY - Nordhausen ER - TY - CHAP A1 - Dörr, Dominik A1 - Münch, Justin A1 - Adam, Mario ED - Wesselak, Viktor T1 - Hochaufgelöste Langzeitprognose des deutschen Strom-Importpotenzials mithilfe von Methoden des Maschinellen Lernens T2 - RET.Con 2024. 7. Regenerative Energietechnik Konferenz in Nordhausen, 08.-09. Februar 2024. Tagungsband KW - KIVi Y1 - 2024 SN - 978-3-940820-23-5 SP - 71 EP - 78 CY - Nordhausen ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Gül, Fethi A1 - Assmann, Alexander A1 - Akhyari, Payam A1 - Lichtenberg, Artur A1 - Joos, Franz T1 - Validation of loss-coefficient-based outlet boundary conditions for simulating aortic flow JF - Journal of Mechanics in Medicine and Biology Y1 - 2016 U6 - https://doi.org/10.1142/s0219519416500111 VL - 16 IS - 2 PB - World Scientific ER - TY - CHAP A1 - Deckert, Carsten A1 - Stodick, Klaus A1 - Hertz-Eichenrode, David ED - Proff, Heike T1 - Nachhaltige Paketauslieferung mit Mikro-Depots T2 - Making Connected Mobility Work: Technische und betriebswirtschaftliche Aspekte KW - City Logistik KW - Paketlieferung KW - Mikro-depot Y1 - 2021 SN - 978-3-658-32265-6 U6 - https://doi.org/10.1007/978-3-658-32266-3_34 SP - 549 EP - 561 PB - Springer Fachmedien CY - Wiesbaden ER - TY - CHAP A1 - Schomaker, Rahel M. A1 - Lobnig, Christina A. A1 - Deckert, Carsten ED - Schüll, Elmar ED - Berner, Heiko ED - Kolbinger, Martin Lu ED - Pausch, Markus T1 - Soziale Innovation in und durch die öffentliche Verwaltung – theoretische Überlegungen und empirische Ergebnisse für Österreich T2 - Soziale Innovation im Kontext: Beiträge zur Konturierung eines unscharfen Konzepts Y1 - 2022 SN - 978-3-658-37221-7 U6 - https://doi.org/10.1007/978-3-658-37221-7_9 N1 - Projekt: Alpine Social Innovation Strategy - ASIS SP - 205 EP - 225 PB - Springer Fachmedien CY - Wiesbaden ER - TY - BOOK A1 - Niemann, Jörg A1 - Pisla, Adrian T1 - Life-Cycle Management of Machines and Mechanisms T3 - Mechanisms and Machine Science Y1 - 2021 SN - 978-3-030-56447-6 U6 - https://doi.org/10.1007/978-3-030-56449-0 VL - 90 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Deckert, Carsten ED - Deckert, Carsten T1 - Nachhaltige Logistik: Verbesserte Ressourcennutzung und Umweltverträglichkeit durch Green Logistics und City-Logistik T2 - CSR und Logistik: CSR und Logistik: Spannungsfelder Green Logistics und City-Logistik Y1 - 2021 U6 - https://doi.org/10.1007/978-3-662-63570-4_1 VL - Management-Reihe Corporate Social Responsibility SP - 3 EP - 44 PB - Springer CY - Berlin, Heidelberg ET - 2., überarb. Aufl. ER - TY - CHAP A1 - Macher, Georg A1 - Brenner, Eugen A1 - Messnarz, Richard A1 - Ekert, Damjan A1 - Stolfa, Jakub A1 - Stolfa, Svatopluk A1 - Niemann, Jörg A1 - Fussenecker, Claudia A1 - Schoening, Marius A1 - Paul, Alexander A1 - Pavlov, Nikolay A1 - Gigov, Boyko A1 - Pavlova, Maria Stefanova ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - A Study of Electric Powertrain Engineering - Its Requirements and Stakeholders Perspectives T2 - Systems, Software and Services Process Improvement Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_29 SP - 396 EP - 407 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Fussenecker, Claudia A1 - Niemann, Jörg A1 - Paul, Alexander A1 - Schlösser, Martin A1 - Schöning, Marius ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Educating Future Engineers – Meeting Challenges at Secondary School and University T2 - Systems, Software and Services Process Improvement Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_56 SP - 742 EP - 753 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Wendland, André A1 - Bumann, Marc A1 - Martin, Shane A1 - Niemann, Jörg A1 - Bosman, Stephen ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Optimizing System Design Through Thermal Analysis with Cubesatellite as Case Study T2 - Systems, Software and Services Process Improvement Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_30 SP - 408 EP - 420 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Kretschmar, Dominik A1 - Niemann, Jörg A1 - Müller, Felix ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Spin-Off Strategies of Established Companies Due to Digitalization and Disruption T2 - Systems, Software and Services Process Improvement Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_58 SP - 772 EP - 782 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Niemann, Jörg A1 - Fussenecker, Claudia A1 - Schlösser, Martin ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Toolbox of Methods for the Digital Business Transformation T2 - Systems, Software and Services Process Improvement KW - FBMV Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4_59 SP - 783 EP - 793 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Deckert, Carsten A1 - Kalefeld, Jannik A1 - Kutz, Martin ED - Kumar, Vikas ED - Leng, Jiewu ED - Akberdina, Victoria ED - Kuzmin, Evgeny T1 - Business Model Innovation for the Internet of Things T2 - Lecture Notes in Information Systems and Organisation: Digital Twins and New Business Models Y1 - 2022 SN - 978-3-030-94617-3 U6 - https://doi.org/10.1007/978-3-030-94617-3_23 SN - 2195-4968 VL - LNISO,volume 54 SP - 321 EP - 333 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Deckert, Carsten A1 - Chandra, Tanja A1 - Mohya, Ahmed A1 - Schmidt, Gerrit A1 - Schönheit, Matthias ED - Deckert, Carsten T1 - Unterirdischer Warentransport in urbanen Ballungsräumen T2 - CSR und Logistik Y1 - 2021 SN - 978-3-662-63569-8 U6 - https://doi.org/10.1007/978-3-662-63570-4_14 VL - Management-Reihe Corporate Social Responsibility SP - 283 EP - 305 PB - Springer CY - Berlin, Heidelberg ET - 2., überarb. Aufl. ER - TY - GEN ED - Yilmaz, Murat ED - Niemann, Jörg ED - Clarke, Paul ED - Messnarz, Richard T1 - Systems, Software and Services Process Improvement T2 - Communications in Computer and Information Science Y1 - 2020 SN - 978-3-030-56440-7 U6 - https://doi.org/10.1007/978-3-030-56441-4 VL - 1251 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Stöhr, Marcel A1 - Zielke, Thomas ED - Leipzig, Konrad von ED - Sacks, Natasha ED - Mc Clelland, Michelle T1 - Machine Learning for Soft Sensors and an Application in Cement Production T2 - Smart, Sustainable Manufacturing in an Ever-Changing World Proceedings of International Conference on Competitive Manufacturing (COMA ’22) KW - Soft sensors KW - Machine learning KW - Dynamic processes KW - Cement production KW - Robustness KW - Artificial intelligence Y1 - 2023 SN - 978-3-031-15604-5 U6 - https://doi.org/10.1007/978-3-031-15602-1_46 VL - Lecture Notes in Production Engineering SP - 627 EP - 638 PB - Springer Nature Switzerland CY - Cham ER - TY - CHAP A1 - Deckert, Carsten A1 - Godau, Daniel A1 - Kretschmar, Dominik A1 - Rudolph, Vincent ED - Deckert, Carsten T1 - Komparative Analyse der Nachhaltigkeitsberichte in der deutschen Logistikbranche T2 - CSR und Logistik Y1 - 2021 SN - 978-3-662-63569-8 U6 - https://doi.org/10.1007/978-3-662-63570-4_2 VL - Management-Reihe Corporate Social Responsibility SP - 45 EP - 62 PB - Springer CY - Berlin, Heidelberg ET - 2., überarb. Aufl. ER - TY - CHAP A1 - Deckert, Carsten A1 - Stodick, Klaus A1 - Hertz-Eichenrode, David ED - Deckert, Carsten T1 - Nachhaltige Paketauslieferung mit Mikro-Depots T2 - CSR und Logistik Y1 - 2021 SN - 978-3-662-63569-8 U6 - https://doi.org/10.1007/978-3-662-63570-4_13 VL - Management-Reihe Corporate Social Responsibility SP - 271 EP - 282 PB - Springer CY - Berlin, Heidelberg ET - 2., überarb. Aufl. ER - TY - CHAP A1 - Deckert, Carsten A1 - Görs, Nadine A1 - Mäckel, Frederic ED - Deckert, Carsten T1 - Carbon Footprint in der Transportbranche T2 - CSR und Logistik Y1 - 2021 SN - 978-3-662-63569-8 U6 - https://doi.org/10.1007/978-3-662-63570-4_5 VL - Management-Reihe Corporate Social Responsibility SP - 103 EP - 121 PB - Springer CY - Berlin, Heidelberg ET - 2., überarb. Aufl. ER - TY - RPRT A1 - Biedermann, Till M. A1 - Kameier, Frank T1 - Konzeption eines praxisnahen Versuchsstandes zur Untersuchung von Leading Edge Serrations als Proof-of-Concept N2 - Der Einsatz von Leading Edge Serrations (gezackte Tragflächenvorderkanten) als Schallminderungsmaßnahme bei hochturbulenter Anströmung wurde bisher maßgeblich in Form von eben im Windkanal gelagerten, modifizierten Tragflügeln untersucht. Diese Untersuchungen dienten der aeroakustischen Designoptimierung und der Identifikation von Wirkmechanismen anhand eines simplifizierten Systems. Das zukünftige Einsatzgebiet dieser neuartigen Modifikation wird im Bereich von Windenergieanlagen, Flugzeugtriebwerken und kontrarotierenden Rotoren der nächsten Generation aber auch bei gängigen Axialverdichtern gesehen. Der Transfer der im ebenen System erhaltenen Erkenntnisse in Richtung einer rotierenden Applikation erfordert die Berücksichtigung einer Vielzahl an zusätzlichen Einflussgrößen, welche die aerodynamische und aeroakustische Effizienz der Leading Edge Serrations in Form verstärkender oder auch hemmender Effekte signifikant beeinflussen können. Im durchgeführten Projekt wurde untersucht, inwieweit sich diese durch Buckelwale und Eulen inspirierten Tragflächen auf rotierende Systeme übertragen lassen, ohne Einbußen ihrer bereits bestätigten vorteilhaften aeroakustischen und aerodynamischen Eigenschaften zu erleiden. Von besonderem Interesse waren hier etwaige Einflüsse der mit dem Radius variierenden Umfangsgeschwindigkeit sowie der im Praxisfall stark variierenden Anströmrichtungen und –zustände. In diesem Sinne wurde ein experimenteller Versuchsstand in Anlehnung an die DIN EN ISO 5136 zur simultanen Vermessungen der aeroakustischen und aerodynamischen Eigenschaften konzipiert. Ein eigens konzipierter Modellrotor in Form eines Axialverdichters ermöglichte einen flexiblen Austausch der Rotorblätter, was die Möglichkeit einer kosten- und zeitsparenden Variation der Rotorblattgeometrien bietet. Im Rahmen des Projektes konnten neben der Konzeption des Versuchsstandes im Rahmen einer experimentellen Proof-of-Concept Studie und einer umfangreichen Quantifizierung der Zuströmbedingungen auch das Schallreduktionspotential der untersuchten Applikation im rotierenden System nachgewiesen werden. Eine Variation verschiedener aerodynamischer und geometrischer Einflussgrößen lässt zudem allgemeingültige Aussagen bezüglich der zugrundeliegenden Abhängigkeiten zu. Zudem führten parallele Untersuchungen mittels Array-Beamforming mit dem Ziel der Schallquellenlokalisationen zu wertvollen Transfererkenntnissen bezüglich des Einsatzes von Leading Edge Serrations im rotierenden System. Eine erste Untersuchung zur möglichen Approximation der Wirkzusammenhänge von Einfluss- und Zielgrößen wies ein hohes Potential zur komplexen Modellbildung mittels neuronaler Netze aus. Die gewonnenen Erkenntnisse tragen zu einem tieferen Verständnis der zugrundeliegenden Wirkmechanismen von Leading Edge Serrations bei und unterstützten in der Definition weiterer verbleibender Forschungslücken, deren Erforschung im mittel- bis langfristigen Kontext einen Beitrag zu einer industriellen Verwertung dieser Applikation und somit zu einer Reduktion der Lärmbelastung der Bevölkerung leistet. N2 - Leading Edge Serrations are well known for their superior performance in reducing aerofoil-gust-interaction noise as well as beneficial aerodynamic properties such as delayed stall effects and an increased post stall performance. However, up to now, Leading Edge Serrations were mainly analysed in a rigidly mounted setting in front of free jets or in cascade applications in order to investigate fundamental effects and to study the underlying aerodynamic and aeroacoustic principles. Eventually, these serrations are intended to be used in rotating systems such as turbomachines, counter rotating rotors or fans and blowers. Even wind energy turbines represent a possible field of application. The transfer of the rigidly well-analysed serration effects to the rotating frame, though, poses one of the main obstacles for successfully implementing Leading Edge Serrations as a passive noise reduction application as several additional parameters and varying boundary conditions might affect the aerodynamic and aeroacoustic efficiency of the serrations. The current project investigates on how these serrations, inspired by owls and humpback whales, can be transferred to the rotating system by avoiding losses in aeroacoustic and aerodynamic performance and taking into account the already acquired knowledge on the underlying effects. Of particular interest are effects of the circumferential velocity, which scales linearly with the rotor radius as well as effects of varying points of operation, leading to changes in the stagger angles or altering inflow conditions, respectively. For the experimental study a test rig according to the ISO 5136 standard was realised, allowing a simultaneous measurement of both, aerodynamic and aeroacoustic properties. The rotor was self-designed according to the single aerofoil approach, featuring exchangeable fan blades to enable a time- and cost efficient variation of the serration parameters. Apart from realising the test rig and a detailed quantification of the inflow conditions, a Proof-of-Concept study was performed in order to confirm the aeroacoustic effect of Leading Edge Serrations in a rotating application and to carve out the noise reduction potential. Moreover, a variation of the geometric serration parameters as well as the aerodynamic inflow conditions already allows for drawing basic conclusions on the underlying scaling-laws and dependencies. A supplementary aeroacoustic study via array beamforming in the rigid frame provided information on the positions of main noise sources of aerofoils with and without serrations, which were of high value and facilitated a successful transfer to the rotating frame. Finally, by use of artificial neural networks, first steps were undertaken towards modelling the effect of the investigated parameters on the aerodynamic and aeroacoustic performance. A first developed fundamental model already allows for a prediction of the noise radiation and offers multiobjective-optimisation by means of aerodynamic and aeroacoustic properties. T3 - Berichte zu HSD-intern geförderten Forschungsprojekten - 2 KW - Konzeption KW - Leading Edge Serrations KW - Proof of Concept KW - Versuch Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-12300 SN - 2625-3690 CY - Düsseldorf ER - TY - GEN T1 - 601 - Dritte Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Mechanical Engineering“ an der Hochschule Düsseldorf vom 04.04.2018 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 601 KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - Master Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11813 CY - Düsseldorf ER - TY - GEN T1 - 600 - Dritte Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Internationales Wirtschaftsingenieurwesen“ an der Hochschule Düsseldorf vom 04.04.2018 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 600 KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - Master Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11803 CY - Düsseldorf ER - TY - GEN T1 - 613 - Neubekanntmachung der Prüfungsordnung für den Masterstudiengang „Mechanical Engineering“ an der Hochschule Düsseldorf vom 19.06.2018 N2 - Nachstehend wird der Wortlaut der Prüfungsordnung für den Masterstudiengang „Mechanical Engineering“ an der Hochschule Düsseldorf vom 15.02.2016 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 426) neu bekannt gemacht. Die Neubekanntmachung berücksichtigt die Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Mechanical Engineering“ an der Hochschule Düsseldorf vom 07.06.2016 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 458), die Zweite Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Mechanical Engineering“ an der Hochschule Düsseldorf vom 02.06.2017 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 555) sowie die Dritte Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Mechanical Engineering“ an der Hochschule Düsseldorf vom 04.04.2018 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 601). T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 613 KW - Neubekanntmachung KW - Prüfungsordnung KW - Master KW - Mechanical Engineering KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-12017 CY - Düsseldorf ER - TY - JOUR A1 - Wiesmann, Thomas A1 - Youn Suh, Sung A1 - Kaluza, Stefan A1 - Lohmann, Heiko A1 - Zeidler‐Fandrich, Barbara T1 - Catalytic Oxygen Removal from Synthetic Coke Oven Gas: A Comparison of Sulfided CoMo/γ‐Al 2 O 3 and NiMo/γ‐Al 2 O 3 Catalysts with Pt/γ‐Al 2 O 3 as Benchmark Catalyst JF - Chemie Ingenieur Technik KW - DEAL Y1 - 2020 U6 - https://doi.org/10.1002/cite.202000067 N1 - The research project is funded by the Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung, BMBF, Verbundvorhaben Carbon2Chem®, FKZ: 03EK3040D). Open access funding enabled and organized by Projekt DEAL VL - 92 IS - 10 SP - 1533 EP - 1541 PB - Wiley ER - TY - RPRT A1 - Deckert, Carsten ED - Niemann, Jörg ED - Deckert, Carsten T1 - Tensions in Team Creativity: Using the Value Square to Model Team Climate for Creativity N2 - This paper explores the tensions in team creativity. The tensions in team creativity are based on a tension between originality and effectiveness in the standard definition of creativity. To display the tensions in team creativity, the value square (“Wertequadrat”) developed by Schulz von Thun (1998) is used which balances a value with its countervalue. The author identifies tensions for cohesion, consensus and conformity. Cohesion is described as a tension between team diversity and team safety, consensus as a tension between constructive controversy and participatory decision-making and conformity as a tension between support for innovation and task orientation. Finally, the connection of individual and team creativity is described as an interplay between solitary and interactive components. T3 - Working Papers in Industrial Engineering - 1 KW - Innovation KW - Creativity KW - Team Climate Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-16763 SN - 2627-8375 CY - Düsseldorf ER - TY - GEN T1 - 516 - Zweite Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 516 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Master KW - Simulation und Experimentaltechnik KW - MV KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10385 CY - Düsseldorf ER - TY - GEN T1 - 513 - Zweite Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 513 KW - Satzung KW - Änderung KW - Bachelor KW - Wirtschaftsingenieur KW - Maschinenbau KW - Amtliche Mitteilungen KW - MV KW - Prüfungsrecht KW - Prüfungsordnung Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10351 CY - Düsseldorf ER - TY - GEN T1 - 514 - Dritte Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 514 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Master KW - Simulation und Experimentaltechnik KW - MV KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10368 CY - Düsseldorf ER - TY - GEN T1 - 515 - Zweite Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 515 KW - Satzung KW - Prüfungsordnung KW - Master KW - Simulation und Experimentaltechnik KW - MV KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10376 CY - Düsseldorf ER - TY - GEN T1 - 597 - Dritte Satzung zur Änderung der Prüfungsordnung für die Bachelor-Studiengänge Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Hochschule Düsseldorf vom 04.04.2018 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 597 KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - Bachelor KW - Prüfungsordnung Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11779 CY - Düsseldorf ER - TY - GEN T1 - 598 - Zweite Satzung zur Änderung der Prüfungsordnung für die dualen Bachelor-Studiengänge„Produktentwicklung und Produktion“ (PPD) und „Prozess-, Energie- und Umwelttechnik“ (PEUD) an der Hochschule Düsseldorf vom 04.04.2018 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 598 KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - Bachelor Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11784 CY - Düsseldorf ER - TY - GEN T1 - 599 - Dritte Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 04.04.2018 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 599 KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - Bachelor Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11797 CY - Düsseldorf ER - TY - GEN T1 - 609 - Neubekanntmachung der Prüfungsordnung für die Bachelor-Studiengänge „Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Hochschule Düsseldorf vom 19.06.2018 N2 - Nachstehend wird der Wortlaut der Prüfungsordnung für die Bachelorstudiengänge „Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Hochschule Düs-seldorf vom 16.09.2011 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 267) neu bekannt gemacht. Die Neubekanntmachung berücksichtigt die Erste Satzung zur Änderung der Prüfungsordnung für die Bachelorstudiengänge „Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Hochschule Düsseldorf vom 17.03.2014 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 374), die Zweite Satzung zur Änderung der Prüfungsordnung für die Bachelorstudiengänge „Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Hochschule Düsseldorf vom 16.01.2017 (Ver-kündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 512) sowie die Dritte Satzung zur Änderung der Prüfungsordnung für die Bachelorstudiengänge „Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Hochschule Düsseldorf vom 04.04.2018 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 597). T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 609 KW - Neubekanntmachung KW - Prüfungsordnung KW - Bachelor KW - PP KW - PEU KW - Produktentwicklung und Produktion KW - Prozess-, Energie- und Umwelttechnik KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11971 CY - Düsseldorf ER - TY - GEN T1 - 610 - Neubekanntmachung der Prüfungsordnung für die dualen Bachelor-Studiengänge „Produktentwicklung und Produktion“ (PPD) und „Prozess-, Energie- und Umwelttechnik“ (PEUD) an der Hochschule Düsseldorf vom 19.06.2018 N2 - Nachstehend wird der Wortlaut der Prüfungsordnung für die dualen Bachelorstudiengänge „Produktentwicklung und Produktion“ (PPD) und „Prozess-, Energie- und Umwelttechnik“ (PEUD) an der Hochschule Düsseldorf vom 16.09.2011 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 269) neu bekannt gemacht. Die Neubekanntmachung berücksichtigt die Erste Satzung zur Änderung der Prüfungsordnung für die dualen Bachelorstudiengänge „Produktentwicklung und Produktion“ (PPD) und „Prozess-, Energie- und Umwelttechnik“ (PEUD) an der Hochschule Düsseldorf vom 16.01.2017 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 511) sowie die Zweite Satzung zur Änderung der Prüfungsordnung für die dualen Bachelorstudiengänge „Produktentwicklung und Produktion“ (PPD) und „Prozess-, Energie- und Umwelttechnik“ (PEUD) an der Hochschule Düsseldorf vom 04.04.2018 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 598). T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 610 KW - Neubekanntmachung KW - Prüfungsordnung KW - Bachelor KW - PPV KW - PEUD KW - Prozess-, Energie- und Umwelttechnik KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11988 CY - Düsseldorf ER - TY - GEN T1 - 611 - Neubekanntmachung der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 19.06.2018 N2 - Nachstehend wird der Wortlaut der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 16.09.2011 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 265) neu bekannt gemacht. Die Neubekanntmachung berücksichtigt die Erste Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 05.03.2013 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 342), die Zweite Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 16.01.2017 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 513) sowie die Dritte Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 04.04.2018 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 599). T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 611 KW - Neubekanntmachung KW - Prüfungsordnung KW - Bachelor KW - Wirtschaftsingenieur Maschinenbau KW - WIM KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11994 CY - Düsseldorf ER - TY - GEN T1 - 612 - Neubekanntmachung der Prüfungsordnung für den Masterstudiengang „Internationales Wirtschaftsingenieurwesen“ an der Hochschule Düsseldorf vom 19.06.2018 N2 - Nachstehend wird der Wortlaut der Prüfungsordnung für den Masterstudiengang „Internationales Wirtschafsingenieurwesen“ an der Hochschule Düsseldorf vom 15.02.2016 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 425) neu bekannt gemacht. Die Neubekanntmachung berücksichtigt die Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Internationales Wirtschafsingenieurwesen“ an der Hochschule Düsseldorf vom 07.06.2016 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 460), die Zweite Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Internationales Wirtschafsingenieurwesen“ an der Hochschule Düsseldorf vom 02.06.2017 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 554) sowie die Dritte Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Inter-nationales Wirtschafsingenieurwesen“ an der Hochschule Düsseldorf vom 04.04.2018 (Verkündungs-blatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 600). T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 612 KW - Neubekanntmachung KW - Prüfungsordnung KW - Master KW - Internationales Wirtschaftsingenieurwesen KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-12001 CY - Düsseldorf ER - TY - GEN T1 - 635 - Zweite Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 15.11.2018 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 635 KW - Änderung KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - MV KW - Prüfungsrecht Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-15614 CY - Düsseldorf ER - TY - GEN T1 - 267 - Prüfungsordnung für die Bachelor-Studiengänge “Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Fachhochschule Düsseldorf vom 16.09.2011 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 267 KW - Prüfungsordnung KW - Bachelor KW - Produktentwicklung und Produktion KW - PP KW - Amtliche Mitteilungen KW - FHD KW - PEU KW - Prüfungsrecht Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-6863 CY - Düsseldorf ER - TY - GEN T1 - 269 - Prüfungsordnung für die dualen Bachelor-Studiengänge “Produktentwicklung und Produktion dual“ (PPD) und „Prozess-, Energie- und Umwelttechnik dual“ (PEUD) an der Fachhochschule Düsseldorf vom 16.09.2011 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 269 KW - Prüfungsordnung KW - Maschinenbau und Verfahrenstechnik KW - Bachelor KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-6885 CY - Düsseldorf ER - TY - GEN T1 - 265 - Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Fachhochschule Düsseldorf vom 16.09.2011 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 265 KW - Prüfungsordnung KW - Bachelor KW - Wirtschaftsingenieur Maschinenbau KW - WIM KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-6843 CY - Düsseldorf ER - TY - GEN T1 - 266 - Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Fachhochschule Düsseldorf vom 16.09.2011 N2 - Aufgrund des § 2 Absatz 4 und des § 64 Absatz 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW. S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 266 KW - Prüfungsordnung KW - Master KW - Simulation und Experimentaltechnik KW - Maschinenbau und Verfahrenstechnik KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-6856 CY - Düsseldorf ER - TY - GEN T1 - 268 - Genehmigung des dualen Bachelor-Studiengangs „Prozess-, Energie- und Umwelttechnik“ (PEUD) an der Fachhochschule Düsseldorf vom 16.09.2011 N2 - Aufgrund des § 2 Absatz 2 und 4 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung genehmige ich den T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 268 KW - Genehmigung KW - Bachelor KW - Prozess - KW - Energie- und Umwelttechnik KW - Maschinenbau und Verfahrenstechnik KW - PEUD KW - Amtliche Mitteilungen Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-6873 CY - Düsseldorf ER - TY - GEN T1 - 342 - Erste Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Fachhochschule Düsseldorf vom 05.03.2013 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 342 KW - Änderung KW - Prüfungsordnung KW - Bachelor KW - Wirtschaftsingenieur KW - Maschinenbau KW - WIM KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7855 CY - Düsseldorf ER - TY - RPRT A1 - Deckert, Carsten A1 - Keszler, Julia A1 - Schmitz, Helen A1 - Mohya, Ahmed T1 - Forecasting Game: Teaching Prospective Engineers Quantitative Forecasting Techniques with a Simulation Game N2 - In order to determine demand as precisely as possible, many businesses use several forecasting methods. The aim of forecasting is to determine future demand based on data from the past. The use of a specific method is not always easy and depends on a number of factors. To help prospective engineers find the most suitable forecasting method for a specific problem, a forecasting game was developed and then evaluated. The paper describes the design and the evaluation of the forecasting game. In order to provide an overview of existing forecasting methods, the first part of the paper examined the mathematical fundamentals of eight different forecasting methods and outlined the requirements for their application. The second part of the paper describes the creation of a forecasting game in which prospective engineers can learn how to determine the appropriate forecasting method for specific scenarios. In total, five scenarios covering the three different demand patterns (linear/stationary, trend and seasonal) as well as the forecast quality methods were developed and can be played through. For each scenario, the player has to choose the most appropriate forecasting method for a specific problem based on a self-created task description. To make the game as realistic as possible, a fictional company with a background story was designed. The last part was about the evaluation of the forecasting game. For the evaluation, a student survey to gather the opinions of the students was conducted. The results of the student survey show an overall positive evaluation of the simulation game by the students. However, the test also showed that the game takes a certain amount of time. Since only 15 of the approximately 30 students who tested the game participated in the evaluation, the results are not significant. T3 - Working Papers in Industrial Engineering - 5 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-39057 SN - 2627-8375 CY - Düsseldorf ER - TY - GEN T1 - 457 - Neubekanntmachung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 07.06.2016 N2 - Nachstehend wird der Wortlaut der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 15.02.2016 (Amtliche Mitteilungen, Verkündungsblatt der Hochschule Düsseldorf Nr. 423) neu bekannt gemacht. Die Neubekanntmachung berücksichtigt die erste Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 07.06.2016 (Amtliche Mitteilungen, Verkündungsblatt der Hochschule Düsseldorf Nr. 456). T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 457 KW - Neubekanntmachung KW - Rahmenprüfungsordnung KW - Maschinenbau und Verfahrenstechnik KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9644 CY - Düsseldorf ER - TY - GEN T1 - 471 - Fachbereichsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf vom 29.08.2016 N2 - Aufgrund der §§ 2 Abs. 4 S. 1, 26 Abs. 3 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) und der Grundordnung der Hochschule Düsseldorf (GO HSD) vom 08.10.2015 hat der Fachbereichsrat des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf die folgende Fachbereichsordnung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 471 KW - Fachbereichsordnung KW - Ordnung KW - MV KW - Maschinenbau und Verfahrenstechnik KW - Amtliche Mitteilungen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9818 CY - Düsseldorf ER - TY - GEN T1 - 511 - Erste Satzung zur Änderung der Prüfungsordnung für die dualen Bachelor-Studiengänge „Produktentwicklung und Produktion dual“ (PPD) und „Prozess-, Energie- und Umwelttechnik dual“ (PEUD) an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 511 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Bachelor KW - Produktentwicklung und Produktion KW - Prozess-, Energie- und Umwelttechnik KW - MV KW - Prüfungsrecht Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10339 CY - Düsseldorf ER - TY - GEN T1 - 512 - Zweite Satzung zur Änderung der Prüfungsordnung für die Bachelor-Studiengänge „Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Hochschule Düsseldorf vom 16.01.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 512 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Bachelor KW - Produktentwicklung und Produktion KW - Amtliche Mitteilungen KW - Prozess -Energie - und Umwelttechnik KW - MV KW - Prüfungsrecht Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10342 CY - Düsseldorf ER - TY - GEN T1 - 460 - Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang "Internationales Wirtschaftsingenieurwesen" an der Hochschule Düsseldorf vom 07.06.2016 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 460 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Master KW - Internationales Wirtschaftsingenieurwesen KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9679 CY - Düsseldorf ER - TY - GEN T1 - 459 - Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang "Simulations- und Experimentaltechnik" an der Hochschule Düsseldorf vom 07.06.2016 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 459 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Prüfung KW - Amtliche Mitteilungen KW - Master KW - Simulations- und Experimentaltechnik KW - MV KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9665 CY - Düsseldorf ER - TY - GEN T1 - 458 - Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang "Mechanical Engineering" an der Hochschule Düsseldorf vom 07.06.2016 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 458 KW - Satzung KW - Änderung KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Master KW - Mechanical Engineering KW - MV KW - Maschinenbau und Verfahrenstechnik KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9654 CY - Düsseldorf ER - TY - GEN T1 - 456 - Erste Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 07.06.0216 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 456 KW - Satzung KW - Änderung KW - Rahmenprüfungsordnung KW - Maschinenbau und Verfahrenstechnik KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9634 CY - Düsseldorf ER - TY - GEN T1 - 553 - Erste Satzung zur Änderung der Prüfungsordnung für die Bachelorstudiengänge „Energie- und Umwelttechnik“ (EUT), „Umwelt- und Verfahrenstechnik“ (UVT), „Maschinenbau Produktentwicklung“ (MPE), „Maschinenbau Produktionstechnik“ (MPT) und „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 02.06.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende studiengangspezifische Prüfungsordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 553 KW - Prüfungsordnung KW - Satzung KW - Bachelor KW - EUT KW - UVT KW - MPE KW - MPT KW - WIM KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10866 CY - Düsseldorf ER - TY - GEN T1 - 554 - Zweite Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang "Internationales Wirtschaftsingenieurwesen" an der Hochschule Düsseldorf vom 02.06.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 554 KW - Satzung KW - Prüfungsordnung KW - Master KW - Internationales Wirtschaftsingenieurwesen KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10879 CY - Düsseldorf ER - TY - GEN T1 - 556 - Zweite Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Simulations- und Experimentaltechnik“ an der Hochschule Düsseldorf N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 556 KW - Satzung KW - Prüfungsordnung KW - Master KW - Simulations- und Experimentaltechnik KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10898 CY - Düsseldorf ER - TY - GEN T1 - 555 - Zweite Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Mechanical Engineering“ an der Hochschule Düsseldorf vom 02.06.2017 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 555 KW - Satzung KW - Prüfungsordnung KW - Master KW - Mechanical Engineering KW - MV KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10884 CY - Düsseldorf ER - TY - RPRT A1 - Adam, Mario A1 - Dreher, Martina A1 - Ebling, Dirk A1 - Knopp, Reinhold A1 - Neef, Matthias A1 - Niess, Robert A1 - Pohl, Tobias A1 - Stahl, Wilhelm A1 - van Rießen, Anne A1 - Waldow, Friederike A1 - Weber, Konradin A1 - Weis, Stephanie T1 - LUST Forschungsprojekt - lebenswerte und umweltgerechte Stadt N2 - LUST (lebenswerte und umweltgerechte Stadt) ist ein interdisziplinäres Projekt der Fachbereiche Architektur, Maschinenbau und Verfahrenstechnik sowie Kultur- und Sozialwissenschaften der Hochschule Düsseldorf. Mittelpunkt des Projektes ist die fachübergreifende Entwicklung neuer Konzepte für eine lebenswerte und umweltgerechte Stadt. Es wurde gefördert vom Land Nordrhein-Westfalen im Rahmen des Programms „FH Struktur“. N2 - LUST (Liveable and environment-friendly Urban SiTe) is an interdisciplinary project of the faculties of Architecture, Mechanical and Process Engineering as well as Social Studies and Cultural Sciences at the University of Applied Sciences Düsseldorf. The four-year (2013 – 2016) project is funded by the Ministry of Innovation, Science and Research of North Rhine–Westphalia. The aim is to develop holistic, new concepts for a liveable and environmentally friendly city in a multidisciplinary manner. KW - Stadtentwicklung KW - lebenswert KW - umweltgerecht KW - substainable urban development KW - environmentally friendly KW - liveable Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11458 SN - 978-3-941334-43-4 CY - Düsseldorf ER - TY - GEN T1 - 508 - Gleichstellungsquoten für die Fachbereiche Architektur, Design, Elektro- und Informationstechnik, Maschinenbau und Verfahrenstechnik, Medien und Wirtschaftswissenschaften der Hochschule Düsseldorf gemäß § 37a HG NRW vom 05.12.2016 N2 - Gemäß § 37a des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat das Präsidium im Einvernehmen mit der jeweiligen Dekanin bzw. dem jeweiligen Dekan die folgenden Gleichstellungsquoten (Gender-Diversity-Faktor; § 3 Berufungsordnung vom 04.10.2016) für die Dauer von drei Jahren ab dem 01.01.2017 festgesetzt: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 508 KW - Gleichstellung KW - W KW - M KW - A KW - D KW - MV KW - Gleichstellungsquoten KW - Amtliche Mitteilungen Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10270 CY - Düsseldorf ER - TY - GEN T1 - 323 - Erste Satzung zur Änderung der Prüfungsordnung für die Bachelor-Studiengänge „Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Fachhochschule Düsseldorf vom 04.12.2012 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 323 KW - Bachelor KW - Produktentwicklung KW - Produktion KW - Umwelttechnik KW - PP KW - PEU KW - Prüfungsordnung KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7617 CY - Düsseldorf ER - TY - GEN T1 - 322 - Erste Satzung zur Änderung der Prüfungsordnung für die Bachelor-Studiengänge „Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Fachhochschule Düsseldorf vom 04.12.2012 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 322 KW - Bachelor KW - Produktentwicklung KW - Produktion KW - Umwelttechnik KW - PP KW - PEU KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7601 CY - Düsseldorf ER - TY - GEN T1 - 392 - Zweite Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Fachhochschule Düsseldorf vom 08.01.2015 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HZG) vom 16. September 2014 (GV.NRW S. 547) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 392 KW - Amtliche Mitteilungen KW - Prüfungsordnung KW - Maschinenbau KW - Verfahrentechnik KW - Master KW - Prüfungsrecht Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-8806 CY - Düsseldorf ER - TY - GEN T1 - 391 - Erste Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Fachhochschule Düsseldorf vom 08.01.2015 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HZG) vom 16. September 2014 (GV.NRW S. 547) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 391 KW - Amtliche Mitteilungen KW - Prüfungsordnung KW - Maschinenbau KW - Verfahrentechnik KW - Master KW - Prüfungsrecht Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-8797 CY - Düsseldorf ER - TY - GEN T1 - 423 - Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 15.02.2016 N2 - Aufgrund der§§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen(HG NRW) vom 16.09.2014 (GV.NRW S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Rahmenprüfungsordnung (RahmenPO) als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 423 KW - Rahmenprüfungsordnung KW - Prüfungsordnung KW - Maschinenbau und Verfahrenstechnik KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9272 CY - Düsseldorf ER - TY - GEN T1 - 424 - Prüfungsordnung für die Bachelorstudiengänge "Energie- und Umwelttechnik" (EUT),"Umwelt- und Verfahrenstechnik" (UVT), "Maschinenbau Produktentwicklung" (MPE), "Maschinenbau Produktionstechnik" (MPT) und "Wirtschaftsingenieur Maschinenbau" (WIM) an der Hochschule Düsseldorf vom 15.02.2016 N2 - Aufgrund der§§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (HG NRW) vom 16.09.2014 (GV.NRW S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende studiengangspezifische Prüfungsordnung als Satzung erlassen. Diese Prüfungsordnung gilt nur in Verbindung mit der Rahmenprüfungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf (RahmenPO) vom 15.02.2016 in der jeweils gültigen Fassung. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 424 KW - Prüfungsordnung KW - Bachelor KW - EUT KW - UVT KW - MPE KW - MPT KW - WIM KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9280 CY - Düsseldorf ER - TY - GEN T1 - 427 - Prüfungsordnung für den Masterstudiengang "Simulations- und Experimentaltechnik" an der Hochschule Düsseldorf vom 15.02.2016 N2 - Aufgrund der§§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen(HG NRW) vom 16.09.2014 (GV.NRW S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende studiengangspezifische Prüfungsordnung als Satzung erlassen. Diese Prüfungsordnung gilt nur in Verbindung mit der Rahmenprüfungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf (RahmenPO) vom 15.02.2016 in der jeweils gültigen Fassung. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 427 KW - Prüfungsordnung KW - Master KW - Simulations - und Experimentaltechnik KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9316 CY - Düsseldorf ER - TY - GEN T1 - 426 - Prüfungsordnung für den Masterstudiengang "Mechanical Engineering" an der Hochschule Düsseldorf vom 15.02.2016 N2 - Aufgrund der§§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes NordrheinWestfalen(HG NRW) vom 16.09.2014 (GV.NRW S. 547) in der aktuell gültigen Fassung hat dienHochschule Düsseldorf die folgende studiengangspezifische Prüfungsordnung als Satzung erlassen. Diese Prüfungsordnung gilt nur in Verbindung mit der Rahmenprüfungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf (RahmenPO) vom 15.02.2016 in der jeweils gültigen Fassung. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 426 KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Master KW - Mechanical Engineering KW - Prüfungsrecht Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-9308 CY - Düsseldorf ER - TY - THES A1 - Müller, Thomas T1 - Verfahren zur Tragfähigkeitsberechnung von hochübersetzenden Epizykloidengetrieben für die Elektromobilität N2 - In dieser Arbeit wird ein allgemeingültiges Verfahren zur Tragfähigkeitsberechnung von hochübersetzenden Epizykloidengetrieben entwickelt. Epizykloidengetriebe sind spezielle Umlaufrädergetriebe mit epizykloidaler Triebstockverzahnung. Die Grundlage des Verfahrens bilden die Berechnungs- und Anwendungsnormen der DIN 3990. Neben der Herleitung des Rechengangs wird beispielhaft der Tragfähigkeitsnachweis für die Anwendung in einem urbanen Elektrofahrzeug ausgeführt. Das dabei betrachtete Epizykloidengetriebe hat eine Übersetzung von -34 bei einer maximalen Eingangsdrehzahl von 20.000 min-1 und einer zu übertragenden Leistung von 27 kW. Der Rechengang teilt sich auf in den Nachweis der Flankentragfähigkeit, der Zahnfußtragfähigkeit und der Fresstragfähigkeit. Das Vorgehen je Nachweis ist dabei vergleichbar: Es werden zunächst individuelle Faktoren berechnet, die anschließend in den rechnerischen Festigkeitsnachweis einfließen. Bei der Entwicklung des Rechenverfahrens wird auf eine Allgemeingültigkeit der Gleichungen geachtet. Damit wird die erstellte Auslegungsgrundlage auch für ein breites Einsatzspektrum außerhalb der Elektromobilität nutzbar. Für zukünftige Untersuchungen zu Aspekten der Dimensionierung und Anwendung der Epizykloidengetriebe werden Hinweise und Ansätze basierend auf den erlangten Erkenntnissen bereitgestellt. N2 - In this scientific paper a universal procedure is developed for the load capacity calculation of Epicycloid Gears. Epicycloid Gears are special Planetary Gears with an epicycloidical Lantern Gearing. The basis of the procedure are the calculation and application standards of the DIN 3990. In addition to the derivation of the calculation process, the load-bearing capacity proof for the application in an urban electric vehicle is exemplary carried out. The considered Epicycloid Gear has a transmission ration of -34 at a maximum input rotation speed of 20.000 min-1 and a transmitted power of 27 kW. The calculation process is divided into the proof of the Flank Load Capacity, the Root Load Capacity and the Scuffing Load Capacity. The procedure per detection is comparable: Apriori individual factors are calculated and entered into the analytical proof of strength afterwards. In the development of the calculation procedure the universal validity of the equations is considered. Thereby the created layout basis is utilizable for a wide application spectrum beyond the electro mobility. For future studies on aspects of dimensioning and usage of the Epicycloid Gear further hints and approaches based on the gained knowledge are provided. T2 - Procedure for the load capacity calculation of high transmission epicycloid gears for electric mobility KW - Getriebe KW - Elektromobilität KW - Tragfähigkeitsberechnung KW - Transmission KW - electric mobility KW - load capacity calculation KW - FHD Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-8306 CY - Düsseldorf ER - TY - GEN T1 - 279 - Erste Satzung zur Änderung der Fachbereichsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik vom 11.11.2011 N2 - Aufgrund des § 26 Absatz 3 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz HG) vom 01.01.2007 (GV. NRW. S.474) in Verbindung mit der Grundordnung der Fachhochschule Düsseldorf in der jeweils gültigen Fassung hat der Fachbereich Maschinenbau und Verfahrenstechnik die folgende Fachbereichsordnung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 279 KW - Fachbereichsordnung KW - Maschinenbau KW - Verfahrenstechnik KW - Änderung KW - Amtliche Mitteilungen Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7011 CY - Düsseldorf ER - TY - GEN T1 - 340 - Erste Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Fachhochschule Düsseldorf vom 05.03.2013 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 340 KW - Änderung KW - Prüfungsordnung KW - Bachelor KW - Wirtschaftsingenieur Maschinenbau KW - WIM KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7836 CY - Düsseldorf ER - TY - GEN T1 - 341 - Erste Satzung zur Änderung der Prüfungsordnung für den Bachelor-Studiengang „Wirtschaftsingenieur Maschinenbau“ (WIM) an der Fachhochschule Düsseldorf vom 05.03.2013 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 341 KW - Änderung KW - Prüfungsordnung KW - Bachelor KW - Wirtschaftsingenieur Maschinenbau KW - WIM KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7843 CY - Düsseldorf ER - TY - GEN T1 - 324 - Erste Satzung zur Änderung der Prüfungsordnung für den dualen Bachelor-Studiengang „Produktentwicklung und Produktion dual“ (PPD) an der Fachhochschule Düsseldorf vom 04.12.2012 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 324 KW - Bachelor KW - Produktentwicklung KW - Dual KW - Prüfungsordnung KW - PPD KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7622 CY - Düsseldorf ER - TY - GEN T1 - 325 - Erste Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Fachhochschule Düsseldorf vom 04.12.2013 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 325 KW - Prüfungsordnung KW - Master KW - Simulation KW - Experimentaltechnik KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7642 CY - Düsseldorf ER - TY - GEN T1 - 326 - Erste Satzung zur Änderung der Prüfungsordnung für den Master-Studiengang „Simulation und Experimentaltechnik“ an der Fachhochschule Düsseldorf vom 04.12.2012 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 326 KW - Prüfungsordnung KW - Master KW - Simulation KW - Experimentaltechnik KW - Prüfungsrecht KW - Amtliche Mitteilungen Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7657 CY - Düsseldorf ER - TY - GEN T1 - 374 - Erste Satzung zur Änderung der Prüfungsordnung für die Bachelor-Studiengänge „Produktentwicklung und Produktion“ (PP) und „Prozess-, Energie- und Umwelttechnik“ (PEU) an der Fachhochschule Düsseldorf vom 17.03.2014 N2 - Aufgrund des § 2 Abs. 4 und des § 64 Abs. 1 des Gesetzes über die Hochschulen im Lande Nordrhein-Westfalen (Hochschulgesetz - HG) vom 31. Oktober 2006 (GV.NRW S. 474) in der aktuell gültigen Fassung hat die Fachhochschule Düsseldorf die folgende Ordnung als Satzung erlassen: T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 374 KW - Satzung KW - Änderung KW - Bachelor KW - Produktentwicklung und Produktion KW - PP KW - Prozess - KW - Energie- und Umwelttechnik KW - PEU KW - Amtliche Mitteilungen KW - Prüfungsrecht Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-8442 CY - Düsseldorf ER - TY - RPRT A1 - Deckert, Carsten T1 - Innovation Scouting - Auf der Suche nach der radikalen Innovation T2 - CBS Working Paper Series N2 - Veränderte wirtschaftliche Rahmenbedingungen und die zunehmende Bedeutung von radikalen Innovationen und technologischen Diskontinuitäten führen dazu, dass mehr und mehr Unternehmen Scouting-Aktivitäten implementieren. Diese gehen über das klassische Innovationsmanagement hinaus. Im vorliegenden Beitrag werden Auswirkungen dieses Scouting Paradigmas diskutiert und ein Framework zu dessen Umsetzung entwickelt, das sowohl den Blick nach außen als auch nach innen richtet. External Innovation Scouting dient dazu, systematisch Technologien und Geschäftsideen als Innovationschancen für das Unternehmen zu ermitteln. Beim Internal Innovation Scouting geht es darum, die richtigen Rahmenbedingungen dafür zu schaffen, dass Mitarbeiter Innovationschancen aufgreifen und im Unternehmen radikale Innovationen marktreif entwickeln können. Außerdem stellt das Innovation Scouting neue Anforderungen an die Innovationsbewertung. Innovation Scouting ergänzt das bestehende Innovationsmanagement um eine langfristige Perspektive, die für das Überleben jenseits der Quartalsberichte von entscheidender Bedeutung sein kann. Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-18296 UR - https://www.researchgate.net/publication/271013459_Innovation_Scouting_-_Auf_der_Suche_nach_der_radikalen_Innovation VL - 2 PB - Cologne Business School CY - Köln ER - TY - RPRT A1 - Deckert, Carsten T1 - Tensions in Creativity - Using the Value Square to Model Individual Creativity T2 - CBD Working Paper Series N2 - The definition of individual creativity is based on a tension between novelty on the one side and usefulness respectively appropriateness on the other side. The paper explores how this tension pervades the stage and componential theories of creativity. To achieve this, the so called value square (“Wertequadrat”) developed by Helwig (1967) and Schulz von Thun (1998)is used which balances a value with its countervalue to analyze creativity. The author identifies tensions of action and inaction, expertise and mindfulness, precision and ambiguity as well as immersion and detachment permeating the creative process and the components of creativity. As a conclusion a morphological box for creativity is presented which allows one to show which combination of characteristics of the tensions support different stages of creativity. Furthermore implications for development and time management are discussed. Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-18209 UR - https://www.researchgate.net/publication/282875608_Tensions_in_Creativity_-_Using_the_Value_Square_to_Model_Individual_Creativity VL - 2 PB - Cologne Business School CY - Köln ER - TY - CHAP A1 - Deckert, Carsten T1 - Why Some Ideas Refuse to Diffuse BT - 8th Annual Conference Front End of Innovation (FEI EMEA), Munich N2 - There is a popular saying in German: Innovation is when the market shouts “Hooray!”. Thus, a new idea is only as good as its diffusion into the addressed social system. The question is what affects the adoption or rejection of a new idea. Carsten Deckert shares his experience on the main innovation resistances and on ways to increase the acceptance of new ideas. He talks about which perceived attributes of innovations are conducive to the rate of adoption of an innovation and which are characteristics of failed innovations. Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-18193 PB - KNect 365 CY - München ER - TY - CHAP A1 - Neef, Matthias T1 - Innerstädtische Nutzung von Kleinwindkraftanlagen: Potentiale und Hürden T2 - Mülheimer Initiative für Klimaschutz, 06.05.2013 Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-21017 CY - Mülheim an der Ruhr ER - TY - GEN T1 - 695 - Gleichstellungsquoten für die Fachbereiche Architektur, Design, Elektro- und Informationstechnik, Maschinenbau und Verfahrenstechnik, Medien und Wirtschaftswissenschaften der Hochschule Düsseldorf gemäß § 37a HG NRW vom 19.05.2020 N2 - Gemäß § 37a des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) in der Fassung des Gesetzes zur Änderung des Hochschulgesetzes vom 12. Juli 2019, hat das Präsidium im Einvernehmen mit der jeweiligen Dekanin bzw. dem jeweiligen Dekan die folgenden Gleichstellungsquoten (Gender-Diversity-Faktor; § 3 Berufungsordnung vom 04.10.2016) für die Dauer von drei Jahren ab dem 01. Januar 2019 festgesetzt... T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 695 KW - Amtliche Mitteilungen Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-21555 CY - Düsseldorf ER - TY - RPRT A1 - Deckert, Carsten T1 - Creative Heuristics: A Framework for Systematic Creative Problem Solving T2 - CBS Working Paper Series Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-17982 UR - https://www.researchgate.net/publication/318700662_Creative_Heuristics_A_Framework_for_Systematic_Creative_Problem_Solving VL - 1 PB - Cologne Business School CY - Köln ER - TY - RPRT A1 - Deckert, Carsten T1 - Tensions in Creative Products - Using the Value Square to Model Functional Creativity T2 - CBS Working Paper Series Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-18078 UR - https://www.researchgate.net/publication/305900610_Tensions_in_Creative_Products_-_Using_the_Value_Square_to_Model_Functional_Creativity VL - 4 PB - Cologne Business School CY - Köln ER - TY - CHAP A1 - Deckert, Carsten T1 - Tensions in Corporate Creativity T2 - Book of Papers N2 - The standard definition of creativity is based on a tension between originality and effectiveness. Borrowing from the wave-particle duality in physics one could say that there is an originality-effectiveness duality at work for creativity. The paper explores how this tension pervades Amabile's (1997) componential theory of organizational creativity with the components organizational motivation, management practices (including work assignment and work control) and resources. As a method the so called value square (" Wertequadrat ") developed by Helwig (1967) and Schulz von Thun (1998) is used which balances a value with its countervalue. The author identifies a tension of corporate tradition and corporate change for organizational motivation, a tension of skills and challenges for work assignment, a tension of management by control and management by loss of control for work control as well as a tension of organizational efficiency and organizational slack for resources. Additionally different implications of these tensions for the resistance of a company to creativity, for an organizational climate conducive to creativity as well as for resource allocation in creative endeavours are discussed. KW - Components of Creativity KW - Corporate Creativity KW - Organizational Creativity Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-18065 UR - https://www.researchgate.net/publication/313010955_TENSIONS_IN_CORPORATE_CREATIVITY SP - 79 EP - 86 ER - TY - RPRT A1 - Rings, Jørn A1 - Deckert, Carsten T1 - Innovation Spaces: Einfluss der physischen Arbeitsumgebung auf kreatives Denken in Büroumgebungen N2 - Das vorliegende Working Paper untersucht den Einfluss der physischen Arbeitsumgebung auf die Kreativität in Unternehmen. Dabei werden sowohl Aspekte der individuellen Kreativität als auch der Corporate Creativity (organisationalen Kreativität) betrachtet. Das Ergebnis ist eine Raumtypologie, die Funktionen eines Raumes in die beiden Achsen „Handeln vs. Geschehen-Lassen“ und „Rückzug vs. Begegnung“ einteilt und dadurch vier unterschiedliche Raumtypen im Hinblick auf die Kreativität unterscheidet. Diese vier Raumtypen sind die Grundlage für das Verständnis von Innovation Spaces – räumlichen Flächen im Unternehmen, die die Kreativ- und Ideenarbeit unterstützen. Das Wirken und die Ausgestaltung dieser unterschiedlichen Funktionen wird anhand von zwei Umsetzungsbeispiele von realisierten Innovation Spaces dargestellt und anhand der Ergebnisse einer Studie zu Akzeptanz und Erfolg von Innovation Spaces untersucht. Daraus werden Handlungsempfehlungen an Unternehmen herausgearbeitet, die Innovation Spaces als Teil einer Innovationskultur im Kontext von New Work begreifen. T3 - Working Papers in Industrial Engineering - 2 KW - Arbeitsplatz KW - Corporate Creativity KW - Innovation Spaces Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-20503 SN - 2627-8375 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - CHAP ED - Neef, Matthias ED - Zielke, Thomas ED - Fussenecker, Claudia ED - Niemann, Jörg T1 - Proceedings of the HSD Student Engineering Conferences | Issue 1: Selected Papers from the Courses 2018/2019 T3 - Proceedings of the HSD Student Engineering Conferences - 1 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-21527 SN - 2700-1857 CY - Düsseldorf ER - TY - GEN T1 - 676 - Vierte Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang Internationales Wirtschaftsingenieurwesen an der Hochschule Düsseldorf vom 28.08.2019 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 676 KW - Satzung KW - Prüfungsordnung KW - Amtliche Mitteilungen KW - Master KW - Internationales Wirtschaftsingenieurwesen KW - Prüfungsrecht Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-19446 CY - Düsseldorf ER - TY - CHAP ED - Jahr, Andreas ED - Batos, Andrej T1 - SIMULAND 2020: Simulation landtechnischer Prozesse, Düsseldorf, 19. März 2020 N2 - Die Simulation landwirtschaftlicher Prozesse hat in den vergangenen Jahren stark an Bedeutung gewonnen. Damit ist die Hoffnung verbunden, neue Erkenntnisse zu generieren mit dem Ziel der Erhöhung der Effizienz, Qualität und Wirtschaftlichkeit in der Landwirtschaft. Besonders große Herausforderungen stellen dabei die Modellierung landwirtschaftlicher Güter und der für Simulationen teilweise erforderliche, hohe Rechenaufwand dar. Um der bereits recht weiten und weiter fortschreitenden Verbreitung dieser Technologien Rechnung zu tragen und sie zu fördern, entstand die Idee für eine themenspezifische Tagung, die sich ausdrücklich und ausschließlich mit der Simulation landtechnischer Güter und Prozesse befasst. N2 - The simulation of agricultural processes has become important in recent years. Nowadays, the focus is mainly on the virtual representation of agricultural goods and the processes associated with their processing and handling. The goal of these efforts is to generate new knowledge helping to increase efficiency, quality and profitability in agriculture. Modelling of agricultural goods poses a large challenge due to their highly complex structure and a high scattering of the measured values as well as their inhomogeneous and time-varying properties. In addition, some simulation cases result in a high computing effort. In order to support and promote the already quite broad and progressive dissemination of these technologies, the idea for a topic-specific conference was born, which deals explicitly and exclusively with the simulation of agricultural goods and processes. T2 - SimuLand 2020 - Conference Proceedings KW - Simulation KW - VDI KW - FMDauto KW - Modellierung KW - Simulation KW - Parametrierung KW - Parameterermittlung KW - parameterization KW - parameter determination KW - agricultural goods Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-23368 SN - 978-3-941334-30-4 CY - Düsseldorf ER - TY - RPRT A1 - Niemann, Jörg A1 - Bruckmann, Julian A1 - Krautzer, Florian T1 - Green City Deals: A study on the global warming potential of alternative urban transportation systems N2 - The population is growing constantly in urban areas. This results in an increasing demand for mobility solutions while it is also worldwide aimed to reduce greenhouse gas emissions. This paper summarizes the results of a comparative study concerning the greenhouse gas emissions (based on carbon footprint) caused by alternative urban passenger transportation systems. The emissions for the vehicles and their infrastructure are analyszed over the entire life cycle from manufacturing up to their end of life. An existing cable car sytem in La Paz, Bolivia was analysed and evaluated in comparison to other modes of transportation such as small busses, large busses and a tram. According to the system definitions and the considered balance framework the study shows that beside the use of the systems the materials and the manufacturing as well as the infrastructure have a significant impact on the total emissions over the life cycle. To put focus on the „true and real“ impacts to the society it is preferable to consider the measurement results in total absolute emissions. KW - Carbon footprint KW - urban mobility KW - cable car KW - bus KW - tram KW - transport planning KW - city planning Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-28972 CY - Düsseldorf ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael A1 - Pfeiffelmann, Björn T1 - Aerodynamic Optimization of Airfoil Profiles for Small Horizontal Axis Wind Turbines JF - Computation KW - DOAJ Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-25143 SN - 2079-3197 VL - 6 IS - 2 PB - MDPI ER - TY - JOUR A1 - Becker, Martin A1 - Lippel, Jens A1 - Stuhlsatz, André A1 - Zielke, Thomas T1 - Robust dimensionality reduction for data visualization with deep neural networks JF - Graphical Models Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-26904 SN - 1524-0703 VL - 108 PB - Elsevier ER - TY - GEN T1 - 738 - Dritte Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 18.02.2021 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 738 KW - Amtliche Mitteilungen KW - Prüfungsordnung KW - Rahmenprüfungsordnung KW - Änderung KW - Prüfungsrecht KW - Satzung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-26827 CY - Düsseldorf ER - TY - GEN T1 - 742 - Dritte Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Simulations- und Experimentaltechnik“ an der Hochschule Düsseldorf vom 18.02.2021 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 742 KW - Amtliche Mitteilungen KW - Prüfungsordnung KW - Änderung KW - Master KW - Simulations- und Experimentaltechnik KW - Satzung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-26868 CY - Düsseldorf ER - TY - GEN T1 - 740 - Fünfte Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang Internationales Wirtschaftsingenieurwesen an der Hochschule Düsseldorf vom 18.02.2021 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 740 KW - Amtliche Mitteilungen KW - Prüfungsordnung KW - Änderung KW - Master KW - Internationales Wirtschaftsingenieurwesen KW - Prüfungsrecht Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-26848 CY - Düsseldorf ER - TY - GEN T1 - 741 - Vierte Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Mechanical Engineering“ an der Hochschule Düsseldorf vom 18.02.2021 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 741 KW - Amtliche Mitteilungen KW - Prüfungsordnung KW - Änderung KW - Master KW - Mechanical Engineering KW - Prüfungsrecht Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-26855 CY - Düsseldorf ER - TY - GEN T1 - 739 - Zweite Satzung zur Änderung der Prüfungsordnung für die Bachelorstudiengänge „Energie- und Umwelttechnik“ (EUT), „Umwelt- und Verfahrenstechnik“ (UVT), „Maschinenbau Produktentwicklung“ (MPE), „Maschinenbau Produktionstechnik“ (MPT) und „Wirtschaftsingenieur Maschinenbau" (WIM) an der Hochschule Düsseldorf vom 18.02.2021 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fas-sung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 739 KW - Amtliche Mitteilungen KW - Prüfungsordnung KW - Änderung KW - Energie- und Umwelttechnik KW - Umwelt- und Verfahrenstechnik KW - Prüfungsrecht KW - Maschinenbau Produktentwicklung KW - Maschinenbau Produktionstechnik KW - Wirtschaftsingenieur Maschinenbau KW - Satzung KW - Bachelor Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-26836 CY - Düsseldorf ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn T1 - Comparison of Combustion Models for Lifted Hydrogen Flames within RANS Framework JF - Energies KW - DOAJ Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27727 SN - 1996-1073 VL - 13 IS - 1 PB - MDPI ER - TY - JOUR A1 - Fomin, Alexey A1 - Petelin, Daniil A1 - Jahr, Andreas T1 - Synthesis and Analysis of a Novel Linkage Mechanism with the Helical Motion of the End-Effector JF - Robotics Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27736 SN - 2218-6581 N1 - Supplementary Material ist verfügbar: https://www.mdpi.com/2218-6581/9/3/53/s1 (Zip mit mov-Datei) VL - 9 IS - 3 SP - 1 EP - 15 PB - MDPI ER - TY - JOUR A1 - Girod, Kai A1 - Lohmann, Heiko A1 - Schlüter, Stefan A1 - Kaluza, Stefan T1 - Methanol Synthesis with Steel-Mill Gases: Simulation and Practical Testing of Selected Gas Utilization Scenarios JF - Processes Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-26928 VL - 8 IS - 12 PB - MDPI ER - TY - JOUR A1 - Shahzad, Azeem A1 - Gulistan, Uzma A1 - Ali, Ramzan A1 - Iqbal, Azhar A1 - Benim, Ali Cemal A1 - Kamran, Muhammad A1 - Khan, Salah Ud-Din A1 - Khan, Shahab Ud-Din A1 - Farooq, Aamir T1 - Numerical Study of Axisymmetric Flow and Heat Transfer in a Liquid Film over an Unsteady Radially Stretching Surface JF - Mathematical Problems in Engineering Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27755 N1 - Acknowledgments The authors would like to sincerely appreciate funding from Researchers Supporting Project (no. RSP-2020/58), King Saud University, Riyadh, Saudi Arabia. R. Ali acknowledges the School of Art and Sciences, University of Central Asia, Kyrgyz Republic, for travel grant to visit the Department of Basic Sciences, UET, Taxila, and CFS, Düsseldorf. VL - 2020 SP - 1 EP - 9 PB - Hindawi ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael T1 - Prediction of Roughness Effects on Wind Turbine Aerodynamics JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27775 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Basaran, Anil A1 - Benim, Ali Cemal A1 - Yurddas, Ali T1 - Prediction of heat and fluid flow in microchannel condensation JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27768 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Das, Sampad Gobinda A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal T1 - Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Microchannel under Pulsating Inlet Flow Condition JF - Heat Transfer Engineering Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27697 SP - 1 EP - 14 PB - Taylor & Francis ER - TY - JOUR A1 - Glembin, Jens A1 - Adam, Mario A1 - Deidert, Jörn A1 - Jagnow, Kati A1 - Rockendorf, Gunter A1 - Wirth, Hans Peter T1 - Simulation and Evaluation of Different Boiler Implementations and Configurations in Solar Thermal Combi Systems JF - Energy Procedia KW - Kessel und große Solarthermieanlagen Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27350 N1 - Acknowledgements The work presented in this paper has been realized within the project “Integration von Heizkesseln in Wärmeverbundsysteme mit großen Solaranlagen“ (Integration of heating boilers in thermal energy distribution circuits with large solar systems), which has been funded by the German Ministry for Environment, Nature Conservation and Nu-clear Safety based on a decision of the German Federal Parliament (FKZ 0325958Z). Within the project, the authors developed a new boiler model for dynamic simulations and validated it against test rig and field data. Field measurements and additional system simulations have been used to analyze and evaluate the interaction of the solar thermal system and the boiler. The authors are grateful for the project support. The content of this publication is in the responsibility of the authors. VL - 30 SP - 601 EP - 610 PB - Elsevier ER - TY - JOUR A1 - Schramm, Sebastian A1 - Adam, Mario T1 - Storage in Solar Process Heat Applications JF - Energy Procedia KW - Solare-Prozesswärme-Standards Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27244 SN - 1876-6102 N1 - PII: S1876610214003981 VL - 48 SP - 1202 EP - 1209 PB - Elsevier ER - TY - JOUR A1 - Niemann, Jörg A1 - Pisla, Adrian T1 - Sustainable Potentials and Risks Assess in Automation and Robotization Using the Life Cycle Management Index Tool—LY-MIT JF - Sustainability KW - FLiX KW - DOAJ Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27966 SN - 2071-1050 VL - 10 IS - 12 PB - MDPI ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn T1 - Validation of Combustion Models for Lifted Hydrogen Flame JF - E3S Web of Conferences Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27815 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Iqbal, Sohail A1 - Pfeiffelmann, Björn A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - Numerical analysis of lifted hydrogen flame JF - MATEC Web of Conferences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27950 SN - 2261-236X VL - 240 PB - edp sciences ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Benim, Ali Cemal T1 - Numerical study of the quenching of a laminar premixed hydrogen flame JF - MATEC Web of Conferences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27976 SN - 2261-236X VL - 240 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael A1 - Nahavandi, Ali T1 - Prediction of flow and dispersion in cross–ventilated buildings JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27785 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Saeedrashed, Younis Saida A1 - Benim, Ali Cemal T1 - Validation Methods of Geometric 3D-CityGML Data for Urban Wind Simulations JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27906 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Cicek, Aydin A1 - Eker, Arif Mert T1 - A numerical analysis of the thermohydraulics of an EGS project in Turkey JF - MATEC Web of Conferences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27910 SN - 2261-236X VL - 240 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn T1 - Prediction of hydrogen flame propagation in a channel with exit contraction JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27806 SN - 2267-1242 VL - 128 IS - 01013 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael A1 - Gül, Fethi T1 - Prediction and measurement of the aerodynamic performance of a wind turbine JF - MATEC Web of Conferences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27925 SN - 2261-236X VL - 240 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Iqbal, Sohail A1 - Joos, Franz A1 - Wiedermann, Alexander T1 - Numerical Analysis of Turbulent Combustion in a Model Swirl Gas Turbine Combustor JF - Journal of Combustion Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-28044 SN - 2090-1968 SN - 2090-1976 VL - 2016 SP - 1 EP - 12 PB - Hindawi ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - Numerical analysis of liquid jet impingement cooling of a thermoelectric generator JF - MATEC Web of Conferences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27988 SN - 2261-236X VL - 240 PB - edp sciences ER - TY - JOUR A1 - Saeedrashed, Younis Saida A1 - Benim, Ali Cemal T1 - A computational investigation of the hydrodynamics of the Badush dam in northern Iraq JF - MATEC Web of Conferences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27997 SN - 2261-236X VL - 240 PB - edp sciences ER - TY - JOUR A1 - Fomin, A. A1 - Dvornikov, L. A1 - Paramonov, M. A1 - Jahr, Andreas T1 - To the theory of mechanisms subfamilies JF - IOP Conference Series: Materials Science and Engineering Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-28062 VL - 124 PB - IOP Publishing ER - TY - RPRT A1 - Deckert, Carsten A1 - Maschmann, Jonas Christopher A1 - Ngoy, Mayanga T1 - Kreativität und Entrepreneurship im Masterstudium Maschinenbau an deutschen Fachhochschulen und Universitäten N2 - Von Maschinenbau-Ingenieur*innen wird oft erwartet, innovative Produkte, Dienstleistungen oder Prozesse zu entwickeln und zu vermarkten. Das Ziel der vorliegenden Arbeit ist es herauszufinden, inwiefern sie bereits im Masterstudium Maschinenbau durch die Förderung von Kreativität und Entrepreneurship darauf vorbereitet werden. Um die Forschungsfrage zu beantworten, wurden die Modulhandbücher der zehn größten Universitäten sowie Fachhochschulen mithilfe einer Schlagwortsuche auf einschlägige Begriffe analysiert. Die Studie zeigt, dass deutsche Ingenieur*innen sowohl an Fachhochschulen als auch an Universitäten hinsichtlich Kreativität und Entrepreneurship eher unzureichend ausgebildet werden. N2 - Mechanical engineers are often expected to develop and commercialize innovative products, services, or processes. The aim of this study is to find out to what extent they are already prepared for this in the master's programme in mechanical engineering by promoting creativity and entrepreneurship. To answer the research question, the module manuals of the ten largest universities and colleges were analysed for relevant terms using a keyword search. The study shows that German engineers are rather inadequately trained in creativity and entrepreneurship, both at universities and universities of applied sciences. T3 - Working Papers in Industrial Engineering - 4 KW - Kreativität KW - Innovation KW - Entrepreneurship KW - Entrepreneurial Mindset KW - Creativity KW - Mechanical Engineering Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-32121 SN - 2627-8375 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - JOUR A1 - Falling, Luisa A1 - Kaluza, Stefan A1 - Strucks, Peter T1 - A Short Review on Ni-Catalyzed Methanation of CO²: Reaction Mechanism, Catalyst Deactivation, Dynamic Operation JF - Chemie Ingenieur Technik N2 - Today, the use of renewable energies and recycling of climate-changing gases are increasingly important. In this context,coupling of methanation with small, decentralized CO2sources such as biogas plants provides one possibility. However,fluctuating availability of renewables for hydrogen production in combination with small storage volumes result in anenhanced demand for dynamic process operation. This leads to new research challenges with respect to the required cata-lysts and the overall process design. To draw reliable conclusions about the catalytic performance under dynamic processoperation, the mechanism of the methanation reaction as well as typical deactivation procedures of the catalyst appliedunder steady-state conditions have to be reviewed thoroughly. KW - Power-to-gas KW - Ni catalysts KW - Dynamic operation KW - Deactivation KW - CO2Methanation Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-32134 SN - 1522-2640 VL - 93 SP - 1526 EP - 1536 PB - Wiley ER - TY - JOUR A1 - Nyssen Guillén, Viola Isabel A1 - Deckert, Carsten T1 - Cultural influence on innovativeness - links between “The Culture Map” and the “Global Innovation Index” JF - International Journal of Corporate Social Responsibility KW - culture KW - culture dimensions KW - Innovativeness KW - DOAJ Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-29121 SN - 2366-0074 VL - 6 IS - 1 PB - Springer Nature ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Frank, Thiemo A1 - Assmann, Alexander A1 - Lichtenberg, Artur A1 - Akhyari, Payam T1 - Computational investigation of hemodynamics in hardshell venous reservoirs: A comparative study JF - Artificial Organs N2 - Extracorporeal circulation using heart‐lung‐machines is associated with a profound activation of corpuscular and plasmatic components of circulating blood, which can also lead to deleterious events such as systemic inflammatory response and hemolysis. Individual components used to install the extracorporeal circulation have an impact on the level of activation, most predominantly membrane oxygenators and hardshell venous reservoirs as used in extracorporeal systems. The blood flows in two different hardshell reservoirs are computationally investigated. A special emphasis is placed on the prediction of an onset of transition and turbulence generation. Reynolds‐averaged numerical simulations (RANS) based on a transitional turbulence model, as well as large eddy simulations (LES) are applied to achieve an accurate prediction. In the LES analysis, the non‐Newtonian behavior of the blood is considered via the Carreau model. Blood damage potential is quantified applying the Modified Index of Hemolysis (MIH) based on the predicted flow fields. The results indicate that the flows in both reservoirs remain predominantly laminar. For one of the reservoirs, considerable turbulence generation is observed near the exit site, caused by the specific design for the connection with the drainage tube. This difference causes the MIH of this reservoir to be nearly twice as large as compared to the alternative design. However, a substantial improvement of these performance criteria can be expected by a local geometry modification. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-29070 SN - 1525-1594 VL - 44 IS - 4 SP - 411 EP - 418 PB - Wiley ER - TY - JOUR A1 - Spiegel, Thomas T1 - Impact of Renewable Energy Expansion to the Balancing Energy Demand of Differential Balancing Groups JF - Journal of Sustainable Development of Energy, Water and Environment Systems N2 - The research addresses the present situation on the German electricity market caused by variable renewable energy sources. The increasing number of households with photovoltaic and battery storage systems and their impacts require special attention. These systems change the traditional electricity customer from the sole electricity consumer to an electricity producer and consumer in one person. These so-called prosumers differ in their actual electricity demand from the initially estimated electricity demand with standard load profile. This discrepancy results in deviations within a differential balancing group. Thereby, the main finding of this research is a significant higher balancing energy demand with the expansion of photovoltaic and battery storage systems. Hence, the standard load profile is particularly not suitable for differential balancing groups with a high penetration of solar systems and still less suitable for groups with solar and battery storage systems KW - Balance responsible party KW - Balancing energy KW - Differential balancing group KW - Electricity schedule registration KW - peer KW - Photovoltaic and battery storage systems KW - Prosumer KW - Standard load profile Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-29207 SN - 1848-9257 VL - 6 IS - 4 SP - 784 EP - 799 PB - SDEWES ER - TY - JOUR A1 - Strucks, Peter A1 - Watermann, Clara A1 - Weber, Konradin A1 - Kaluza, Stefan T1 - Systematic Investigations of Vibrational and Fluid‐Mechanical Stability of Coated Monolithic Catalysts JF - Chemie Ingenieur Technik N2 - Heterogeneous catalysts usually consist of porous, inorganic materials. Especially in the mobile application, e.g., in exhaust gas catalysis as a part of the gas line of an engine, there are loads due to vibrations and high gas velocities. It can be assumed that physical stress will lead to a loss of the catalytically active coating. The present contribution describes experimental setups and methods for a systematic and reproducible investigation of the main influences to the mass loss due to vibrational and fluid‐mechanical stress caused by particle‐free gas flows. KW - Design of experiments KW - Extruded catalysts KW - Mechanical stability Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-28930 SN - 1522-2640 VL - 93 IS - 5 SP - 1 EP - 6 PB - Wiley ER - TY - JOUR A1 - Reich, Marius A1 - Gottschald, Jonas A1 - Riegebauer, Philipp A1 - Adam, Mario T1 - Predictive Control of District Heating System Using Multi-Stage Nonlinear Approximation with Selective Memory JF - Energies KW - BestHeatNet KW - DOAJ Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-33627 SN - 1996-1073 VL - 13 IS - 24 PB - MDPI ER - TY - GEN A1 - Seidel, Carl Anton T1 - Jumping Humanoid Simulink Simulation With Three Hill-Type Muscle Models N2 - This paper investigates the implementation of a human body model for the simulation of a jumping motion in Simulink. It contains details to get an insight into modern biomechanics without previous experience. In the simulation, a Hill-Type muscle is used to generate joint momentum with a phenomenologically realistic relationship between muscle length and force. The simulation published with this article is one of many solutions to design a humanoid simulation. The paper guides through the implemented build and explains its range of application. KW - biomechanics KW - humanoid Simulation KW - locomotion study KW - Simulation of Mechanical Systems Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-33765 CY - Düsseldorf ER - TY - GEN T1 - 827- Erste Satzung zur Änderung der Prüfungsordnung für die Bachelorstudiengänge „Energie- und Umwelttechnik“ (EUT), „Umwelt- und Verfahrenstechnik“ (UVT), „Maschinenbau Produktentwicklung“ (MPE), „Maschinenbau Produktionstechnik“ (MPT) und „Wirtschaftsingenieurwesen Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 02.03.2022 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 827 KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - Bachelor Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-36423 CY - Düsseldorf ER - TY - GEN T1 - 829 - Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Simulations- und Experimentaltechnik“ an der Hochschule Düsseldorf vom 02.03.2022 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 829 KW - Amtliche Mitteilungen KW - Master KW - Prüfungsrecht Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-36445 CY - Düsseldorf ER - TY - GEN T1 - 828 - Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Internationales Wirtschaftsingenieurwesen“ an der Hochschule Düsseldorf vom 02.03.2022 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 828 KW - Amtliche Mitteilungen KW - Master KW - Prüfungsrecht Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-36436 CY - Düsseldorf ER - TY - RPRT A1 - Deckert, Carsten A1 - Deckert, Klaus T1 - Kommunikationsbrevier: Verständigung in hysterischen Zeiten Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-36098 CY - Düsseldorf ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Canal, Cansu Deniz A1 - Boke, Yakup Erhan T1 - A Validation Study for RANS Based Modelling of Swirling Pulverized Fuel Flames JF - Energies N2 - A swirling pulverized coal flame is computationally investigated. A Eulerian–Lagrangian formulation is used to describe the two-phase flow. Turbulence is modelled within a RANS (Reynolds averaged numerical simulation) framework. Four turbulence viscosity- (TV) based models, namely the standard k-ε model, realizable k-ε model, renormalization group theory k-ε model, and the shear stress transport k-ω model are used. In addition, a Reynolds stress transport model (RSM) is employed. The models are assessed by comparing the predicted velocity fields with the measurements of other authors. In terms of overall average values, the agreement of the predictions to the measurements is observed to be within the range 20–40%. A better performance of the RSM compared to the TV models is observed, with a nearly twice as better overall agreement to the experiments, particularly for the swirl velocity. In the second part of the investigation, the resolution of the discrete particle phase in modelling the turbulent particle dispersion (TPD) and particle size distribution (SD) is investigated. Using the discrete random walk model for the TPD, it is shown that even five random walks are sufficient for an accuracy that is quite high, with a less than 1% mean deviation from the solution obtained by thirty random walks. The approximation of the measured SD is determined by a continuous Rosin–Rammler distribution function, and inaccuracies that can occur in its subsequent discretization are demonstrated and discussed. An investigation on the resolution of the SD by discrete particle size classes (SC) indicates that 12 SC are required for an accuracy with a less than 1% mean deviation from the solution with 18 SC. Although these numbers may not necessarily be claimed to be sufficiently universal, they may serve as guidance, at least for SD with similar characteristics KW - DOAJ Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-37365 SN - 1996-1073 VL - 14 IS - 21 PB - MDPI ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - Water-Cooled Thermoelectric Generators for Improved Net Output Power: A Review JF - Energies N2 - Thermoelectric generators (TEGs) have the ability to convert waste heat into electrical energy under unfavorable conditions and are becoming increasingly popular in academia, but have not yet achieved a broad commercial success, due to the still comparably low efficiency. To increase the efficiency and economic viability of TEGs, research is performed on the materials on one hand and on the system connection on the other. In the latter case, the net output power of the cooling system plays a key role. At first glance, passive cooling seems preferable to active cooling because it does not affect the net electrical output power. However, as shown in the present review, the active cooling is to be preferred for net output power. The situation is similar in air and water-cooling. Even though air-cooling is easier to set up, the water-cooling should be preferred to achieve higher net output power. It is shown that microchannel cooling has similar hydraulic performance to conventional cooling and inserts increase the net output power of TEG. As the review reveals that active water-cooling should be the method of choice to achieve high net output power, it also shows that a careful optimization is necessary to exploit the potential. KW - Energy Engineering and Power Technology KW - Renewable Energy, Sustainability and the Environment KW - Electrical and Electronic Engineering KW - Control and Optimization KW - DOAJ Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-37323 SN - 1996-1073 VL - 14 IS - 24 PB - MDPI ER - TY - JOUR A1 - Failing, Luisa A1 - Kaluza, Stefan A1 - Strucks, Peter T1 - Catalytic CO2 methanation: Providing optimal test conditions for kinetic investigations JF - Chemie Ingenieur Technik N2 - In the context of using renewable energies and recycling climate-changing gases, methanation of CO2 provides one possibility. However, volatile availability of renewable energies for hydrogen production and fluctuating CO2streams from different sources lead to enhanced demand in investigating the influence of dynamic process operation on the catalyst performance, including detailed kinetic characterization. Reliable kinetic measurements require isothermal temperature control and absence of macrokinetic diffusion limitations. Both were investigated in this work while the determination of steady-state kinetic parameters is part of ongoing studies. Furthermore, a detailed analysis with respect to the long-term-stability of the nickel-based catalyst was performed KW - CO2 methanation KW - Kinetics KW - Long-term stability KW - Ni catalyst KW - Power-to-Gas Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-40026 SN - 1522-2640 VL - 95 IS - 5 SP - 749 EP - 753 PB - Wiley ER - TY - GEN A1 - Deckert, Carsten A1 - Lauermann, Paul T1 - Warum ist es am Rhein so schön? Strategische Ausrichtung des Binnenhafens Bonn T3 - Business Cases in Industrial Engineering - 1 KW - Business Case KW - Hafen KW - Strategie KW - Logistik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-41121 CY - Düsseldorf ER - TY - GEN A1 - Deckert, Carsten T1 - Now What You Hear Is Not a Test: The Invention and Commercialization of Rap Music T3 - Business Cases in Industrial Engineering - 2 KW - Business Case KW - Musikindustrie KW - Entrepreneurship KW - Innovation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-41134 CY - Düsseldorf ER - TY - GEN A1 - Deckert, Carsten A1 - Phan Ngoc, Duc Anh T1 - PlayStation 4 vs. Xbox One: Competitive Analysis of the Video Game Industry T3 - Business Cases in Industrial Engineering - 3 KW - Business Case KW - Strategy KW - Delta Model KW - Video Game Industry Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-41142 CY - Düsseldorf ER - TY - JOUR A1 - Schittkowski, Julian A1 - Ruland, Holger A1 - Laudenschleger, Daniel A1 - Girod, Kai A1 - Kähler, Kevin A1 - Kaluza, Stefan A1 - Muhler, Martin A1 - Schlögl, Robert T1 - Methanol Synthesis from Steel Mill Exhaust Gases: Challenges for the Industrial Cu/ZnO/Al 2 O 3 Catalyst JF - Chemie Ingenieur Technik Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-34526 SN - 1522-2640 N1 - We gratefully appreciate the support received from the Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung, BMBF, Verbundvorhaben Carbon2Chem®). VL - 90 IS - 10 SP - 1419 EP - 1429 PB - Wiley ER - TY - JOUR A1 - Bordoloi, Ankur A1 - Sanchez, Miguel A1 - Noei, Heshmat A1 - Kaluza, Stefan A1 - Großmann, Dennis A1 - Wang, Yuemin A1 - Grünert, Wolfgang A1 - Muhler, Martin T1 - Catalytic Behaviour of Mesoporous Cobalt-Aluminum Oxides for CO Oxidation JF - Journal of Catalysts Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-34344 SN - 2314-5110 SP - 1 EP - 9 PB - Hindawi ER - TY - JOUR A1 - Girod, Kai A1 - Lohmann, Heiko A1 - Kaluza, Stefan T1 - Methanol Synthesis with Steel Mill Gases: Performance Investigations in an On‐Site Technical Center JF - Chemie Ingenieur Technik KW - DEAL Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-34409 SN - 1522-2640 N1 - he investigations within the scope of the project Carbon2Chem® are funded by the German Federal Ministry of Education and Research (BMBF; support code: 03EK3039F). We also thank our project partners in the Carbon2Chem subproject L2 (methanol synthesis) for the trustful cooperation. Open access funding enabled and organized by Projekt DEAL. VL - 93 IS - 5 SP - 850 EP - 855 PB - Wiley ER - TY - GEN T1 - 783 - Prüfungsordnung für die Bachelorstudiengänge „Energie- und Umwelttechnik“ (EUT), „Umwelt- und Verfahrenstechnik“ (UVT), „Maschinenbau Produktentwicklung“ (MPE), „Maschinenbau Produktionstechnik“ (MPT) und „Wirtschaftsingenieurwesen Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 17.06.2021 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende studiengangspezifische Prüfungsordnung als Sat-zung erlassen. Diese Prüfungsordnung gilt nur in Verbindung mit der Rahmenprüfungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf (RahmenPO) vom 15.02.2016 in der jeweils gültigen Fassung. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 783 KW - Amtliche Mitteilungen KW - Prüfungsordnung KW - Bachelor KW - Prüfungsrecht Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-29789 CY - Düsseldorf ER - TY - GEN T1 - 784 - Prüfungsordnung für den Masterstudiengang „Internationales Wirtschaftsingenieurwesen“ an der Hochschule Düsseldorf vom 17.06.2021 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende studiengangspezifische Prüfungsordnung als Satzung erlas-sen. Diese Prüfungsordnung gilt nur in Verbindung mit der Rahmenprüfungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf (RahmenPO) vom 15.02.2016 in der jeweils gültigen Fassung. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 784 KW - Amtliche Mitteilungen KW - Master KW - Prüfungsordnung KW - Prüfungsrecht Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-29798 CY - Düsseldorf ER - TY - GEN T1 - 786 - Prüfungsordnung für den Masterstudiengang „Simulations- und Experimentaltechnik“ an der Hochschule Düsseldorf vom 17.06.2021 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende studiengangspezifische Prüfungsordnung als Satzung erlassen. Diese Prüfungsordnung gilt nur in Verbindung mit der Rahmenprüfungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf (RahmenPO) vom 15.02.2016 in der jeweils gültigen Fassung. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 786 KW - Amtliche Mitteilungen KW - Master KW - Prüfungsordnung KW - Prüfungsrecht Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-29813 CY - Düsseldorf ER - TY - GEN T1 - 785 - Prüfungsordnung für den Masterstudiengang „Mechanical Engineering“ an der Hochschule Düsseldorf vom 17.06.2021 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende studiengangspezifische Prüfungsordnung als Satzung erlas-sen. Diese Prüfungsordnung gilt nur in Verbindung mit der Rahmenprüfungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf (RahmenPO) vom 15.02.2016 in der jeweils gültigen Fassung. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 785 KW - Amtliche Mitteilungen KW - Prüfungsordnung KW - Master Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-29801 CY - Düsseldorf ER - TY - GEN T1 - 833 - Zweite Neubekanntmachung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 07.04.2022 N2 - Nachstehend wird der Wortlaut der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 15.02.2016 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 423) neu bekannt gemacht. Die Neubekanntmachung berücksichtigt die Erste Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 07.06.2016 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 456), die Zweite Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 15.11.2018 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 635) sowie die Dritte Satzung zur Änderung der Rahmenprüfungsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule Düsseldorf vom 18.02.2021 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 738). T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 833 KW - Amtliche Mitteilung KW - Prüfungsrecht Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-36768 CY - Düsseldorf ER - TY - GEN T1 - 860 - Erste Satzung zur Änderung der Fachbereichsordnung für den Fachbereich Maschinenbau und Verfahrenstechnik der Hochschule Düsseldorf vom 20.09.2022 N2 - Aufgrund der §§ 2 Abs. 4 S. 1, 26 Abs. 3 S. 2 des Gesetzes über die Hochschulen des Landes Nord-rhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung und der Grundordnung der Hochschule Düsseldorf vom 08.10.2015 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 414) in der aktuell gültigen Fassung hat die Hoch-schule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 860 KW - Amtliche Mitteilungen Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-38274 CY - Düsseldorf ER - TY - JOUR A1 - Benim, Ali Cemal T1 - Numerical Calculation of Sink Velocities for Helminth Eggs in Water JF - Computation N2 - The settling velocities of helminth eggs of three types, namely Ascaris suum (ASC), Trichuris suis (TRI), and Oesophagostomum spp. (OES), in clean tap water are computationally determined by means of computational fluid dynamics, using the general-purpose CFD software ANSYS Fluent 18.0. The previous measurements of other authors are taken as the basis for the problem formulation and validation, whereby the latter is performed by comparing the predicted sink velocities with those measured in an Owen tube. To enable a computational treatment, the measured shapes of the eggs are parametrized by idealizing them in terms of elementary geometric forms. As the egg shapes show a variation within each class, “mean” shapes are considered. The sink velocities are obtained through the computationally obtained drag coefficients. The latter are defined by means of steady-state calculations. Predicted sink velocities are compared with the measured ones. It is observed that the calculated values show a better agreement with the measurements, for ASC and TRI, compared to the theoretical sink values delivered by the Stokes theory. However, the observed agreement is still found not to be very satisfactory, indicating the role of further parameters, such as the uncertainties in the characterization of egg shapes or flocculation effects even in clean tap water. KW - Applied Mathematics KW - Modeling and Simulation KW - General Computer Science KW - Theoretical Computer Science KW - DOAJ Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-37318 SN - 2079-3197 VL - 9 IS - 12 PB - MDPI ER - TY - JOUR A1 - Mabrouk, Riheb A1 - Naji, Hassane A1 - Benim, Ali Cemal A1 - Dhahri, Hacen T1 - A State of the Art Review on Sensible and Latent Heat Thermal Energy Storage Processes in Porous Media: Mesoscopic Simulation JF - Applied Sciences KW - DOAJ Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-40343 VL - 12 IS - 14 PB - MDPI ER - TY - JOUR A1 - Biedermann, Till M. A1 - Czeckay, Pasquale A1 - Hintzen, Nils A1 - Kameier, Frank A1 - Paschereit, C. O. T1 - Applicability of Aeroacoustic Scaling Laws of Leading Edge Serrations for Rotating Applications JF - acoustics KW - DOAJ KW - ISAVE Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-40311 SN - 2624-599X VL - 2 IS - 3 SP - 579 EP - 594 PB - MDPI ER - TY - JOUR A1 - Benim, Ali Cemal T1 - Introducing the “Mathematical Modelling and Numerical Simulation of Combustion and Fire” Section of the Journal Fire JF - fire Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-40257 SN - 2571-6255 VL - 5 IS - 6 PB - MDPI ER - TY - JOUR A1 - Biswas, Nirmalendu A1 - Mandal, Dipak Kumar A1 - Manna, Nirmal K. A1 - Benim, Ali Cemal T1 - Magneto-hydrothermal triple-convection in a W-shaped porous cavity containing oxytactic bacteria JF - scientific reports N2 - Bioconvective heat and mass transport phenomena have recently been the subject of interest in diverse fields of applications pertaining to the motion of fluids and their thermophysical properties. The transport processes in a system involving triple convective phenomena, irregular geometry, and boundary conditions constitute a complex phenomenon. This work aims to explore the mixed thermo-bioconvection of magnetically susceptible fluid containing copper nanoparticles and oxytactic bacteria in a novel W-shaped porous cavity. The buoyant convention is generated due to the isothermal heating at the wavy bottom wall, whereas the mixed convection is induced due to the shearing motion of the top-cooled sliding wall. Furthermore, the bioconvection is induced due to the manifestation of oxytactic bacteria or organisms. The inclined sidewalls are insulated. The geometry is packed with water based Cu nanoparticle mixed porous structure, which is subjected to a magnetizing field acted horizontally. The complex transport equations are transformed into nondimensional forms, which are then computed using the finite volume-based developed code. The coupled triple-convective flow physics are explored for a wide range of involved controlling parameters, which could provide helpful insight to the system designer for its proper operation. The shape of geometry can be considered one of the important parameters to control the heat and mass transport phenomena. In general, the influence of amplitude (δ) is more compared to the waviness number (m) of the undulations. The magnitude of heat (Nu) and mass (Sh) transfer rate for the W-shaped cavity is high compared to conventional square and trapezoidal-shaped cavities. The output of the analysis could be very helpful for the designer for modeling devices operating on nanotechnology-based bioconvection, microbial fuel cells, and others. KW - DOAJ Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-40041 SN - 2045-2322 VL - 12 PB - Springer Nature ER - TY - JOUR A1 - Mandal, Dipak Kumar A1 - Biswas, Nirmalendu A1 - Manna, Nirmal K A1 - Benim, Ali Cemal T1 - Impact of chimney divergence and sloped absorber on energy efficacy of a solar chimney power plant (SCPP) JF - Ain Shams Engineering Journal N2 - A numerical study is carried out meticulously to scrutinize the impact of different shapes of chimneys like circular (outer dia, dc), convergent (outer dia, 0.5dc), divergent (outer dia, 1.5dc), sudden contraction (outer dia, 0.5dc), and sudden expansion (outer dia, 1.5dc) on the performance of an SCPP. Furthermore, the parametric impact with different chimney divergence angles (CDA, ϕ), and ground absorber slope angle (GSA, γ) on the SCPP performance is also scrutinized. Optimum divergence angle (ϕ=+0.75◦) enhances the power generation up to ~ 47% (76 kW) with a horizontal ground absorber surface. An increase or decrease in CDA lessens the power generation. With a sloped ground absorber angle γ=0.6◦, the gain in power generation is 60% (82 kW). The study of combination of ground sloped absorber (γ=0.6◦) and divergent chimney (ϕ=+0.75◦) shows enhancement of the power generation upto 80% (92 kW) more than the classical Manzaranes plant. KW - Solar chimney power plant (SCPP) KW - Chimney divergence angle KW - Sloped absorber surface KW - Power generation KW - Efficiency KW - Regression analysis KW - DEAL KW - HSD Publikationsfonds Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-42410 SN - 2090-4495 N1 - Datenverfügbarkeitserklärung: Daten, die die Ergebnisse dieser wissenschaftlichen Publikation stützen, sind auf begründete Anfrage bei dem*der korrespondierenden Autor*in erhältlich. PB - Elsevier ER - TY - RPRT A1 - Deckert, Carsten T1 - Good Vibrations from Electronic Circuits: The Technological Development of the Synthesizer T3 - Business Cases in Industrial Engineering - 4 Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-44394 SN - 2941-4075 ER - TY - GEN T1 - 918 - Neubekanntmachung der Prüfungsordnung für den Masterstudiengang „Umweltingenieurwesen“ an der Hochschule Düsseldorf vom 29.02.2024 N2 - Nachstehend wird der Wortlaut der Prüfungsordnung für den Masterstudiengang „Simulations- und Experimentaltechnik“ an der Hochschule Düsseldorf vom 17.06.2021 (Verkündungsblatt der Hoch-schule Düsseldorf, Amtliche Mitteilung Nr. 786) unter ihrer neuen Überschrift neu bekannt gemacht. Die Neubekanntmachung berücksichtigt die Erste Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Simulations- und Experimentaltechnik“ an der Hochschule Düsseldorf vom 02.03.2022 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 829) sowie die Zweite Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Simulations- und Ex-perimentaltechnik“ an der Hochschule Düsseldorf vom 14.02.2024 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 915). T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 918 KW - Amtliche Mitteilungen KW - Prüfungsrecht KW - Prüfungsordnung KW - Master Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-43362 CY - Düsseldorf ER - TY - GEN T1 - 914 - Zweite Satzung zur Änderung der Prüfungsordnung für die Bachelorstudiengänge „Energie- und Umwelttechnik“ (EUT), „Umwelt- und Verfahrenstechnik“ (UVT), „Maschinenbau Produktentwicklung“ (MPE), „Maschinenbau Produktionstechnik“ (MPT) und „Wirtschaftsingenieurwesen Maschinenbau“ (WIM) an der Hochschule Düsseldorf vom 14.02.2024 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 914 KW - Amtliche Mitteilung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-43278 CY - Düsseldorf ER - TY - GEN T1 - 915 - Zweite Satzung zur Änderung der Prüfungsordnung für den Masterstudiengang „Simulations- und Experimentaltechnik“ an der Hochschule Düsseldorf vom 14.02.2024 N2 - Aufgrund der §§ 2 Abs. 4, 64 Abs. 1 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 915 KW - Amtliche Mitteilung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-43283 CY - Düsseldorf ER - TY - JOUR A1 - Barbashov, Maksim A1 - Gellings, Markus A1 - Özen, Semih A1 - Jahr, Andreas T1 - Hochgeschwindigkeitsverschleißtests an Scheibenmähwerkmessern verschiedener Hersteller nach der Verschleißtopfmethode JF - Agricultural engineering.eu N2 - Rotary mowers are ofen used for forage harvesting in agriculture, as this technology can achieve a high throughput. These knives are therefore exposed to high levels of wear and tear, and will also be ofen changed because of loss of material by bad cutting quality. That is why it is interesting to save costs during manufacturing in spite of a correspondingly long service life. This research records the current manufacturing quality of the mower blades and examines how they behave in comparison. Based on the obtained results, further decisions on the methods, procedures and ways of extending the life of the disc mower blades should be proposed. For the investigations, a test bench based on a wear pot was used. The wear that occurs on the blade is determined using several parameters and compared accordingly. The parameters of the test setup determined as a result of the test can be used for further studies of wear resistance. N2 - Bei der Grünfutterernte in der Landwirtschaft werden häufig Scheibenmähwerke eingesetzt, um einen hohen Durchsatz zu erzielen. Die dabei eingesetzten Messer sind einem hohen Verschleiß ausgesetzt und werden häufig wegen Verschleiß gewechselt, was sich in einer schlechten Schnittqualität widerspiegelt. Daher ist es interessant, bereits im Produktionsprozess Kosten einzusparen, ohne dabei die Lebensdauer der Messer zu beeinträchtigen. Diese Studie erfasst die aktuelle Fertigungsqualität von Mähmessern und untersucht, wie sie sich im Vergleich verhalten. Anhand der Ergebnisse sollen weitere Entscheidungen über Methoden, Verfahren und Wege zur Verlängerung der Lebensdauer von Rotorklingen vorgeschlagen werden. Für die Untersuchungen wurde ein Prüfstand auf der Basis des Verschleißtopfverfahrens verwendet. Der am Messer auftretende Verschleiß wird anhand mehrerer Parameter ermittelt und entsprechend verglichen. Die aus den Untersuchungen gewonnenen Parameter können für weiterführende Verschleißuntersuchungen genutzt werden. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-44709 SN - 2943-5641 VL - 79 IS - 2 SP - 95 EP - 115 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e. V. (KTBL) ER - TY - JOUR A1 - Kretschmar, Dominik A1 - Schmieder, Matthias A1 - Niemann, Jörg T1 - Knowledge Management Concept to Compensate a High Employee Fluctuation JF - Acta Technica Napocensis. Series: Applied Mathematics, Mechanics and Engineering N2 - Knowledge is our most valuable asset! Due to the increasing fluctuation caused by demographic change, the change in society and the industry, companies are increasingly confronted with knowledge management. Therefore, companies have problems with carrying out projects effectively. There are several models, methods and tools to develop an effective concept for knowledge management. Can the process capability of projects be ensured despite high fluctuation? What appropriate methods and tools are available to manage knowledge? These and more questions are clarified in the course of this work and presented in a conceptual proposal. KW - knowledge management KW - Wissensmanagement KW - project management KW - Projektmanagement KW - collaboration KW - Kollaboration Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-44818 UR - https://atna-mam.utcluj.ro/index.php/Acta/article/view/1031 VL - 61 IS - III SP - 483 EP - 488 ER - TY - JOUR A1 - Mandal, Dipak Kumar A1 - Bose, Sharmistha A1 - Biswas, Nirmalendu A1 - Manna, Nirmal K. A1 - Cuce, Erdem A1 - Benim, Ali Cemal T1 - Solar Chimney Power Plants for Sustainable Air Quality Management Integrating Photocatalysis and Particulate Filtration: A Comprehensive Review JF - Sustainability N2 - Urban air pollution has become a pressing challenge in recent times, demanding innovative solutions. This review delves into the potential of Solar Chimney Power Plants (SCPPs) as a sustainable approach to mitigating air pollution. The idea of mitigation of pollution may be an added advantage to the use of SCPPs in practice. Recent advancements, such as the integration of photocatalytic reactors (PCRs) for the elimination of greenhouse gases (GHGs), emphasizing the importance of addressing non-CO2 GHGs like CH4 and N2O are analyzed. The novelty of this review is that it not only focuses on the shifting and removal of particulate matter but also on the removal of greenhouse gases. Numerous case studies, ranging from filter-equipped SCPPs to Solar-Assisted Large-Scale Cleaning Systems (SALSCSs), are reviewed, providing a comprehensive understanding of their design, performance, and potential benefits. This review serves as a guide for researchers and policymakers, emphasizing the need for multifaceted approaches to address the intricate nexus of air pollution, renewable energy generation, and climate change mitigation. KW - solar chimney KW - air pollution KW - greenhouse gases KW - particulate matter KW - photocatalysis KW - Luftverschmutzung KW - Photokatalyst KW - Treibhausgas KW - Feinstaub KW - Aufwindkraftwerk Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-45814 SN - 2071-1050 VL - 16 IS - 6 PB - MDPI ER - TY - JOUR A1 - Mandal, Dipak Kumar A1 - Biswas, Nirmalendu A1 - Manna, Nirmal K. A1 - Gayen, Dilip Kumar A1 - Benim, Ali Cemal T1 - An application of artificial neural network (ANN) for comparative performance assessment of solar chimney (SC) plant for green energy production JF - Scientific Reports N2 - This study aims to optimize the power generation of a conventional Manzanares solar chimney (SC) plant through strategic modifications to the collector inlet height, chimney diameter, and chimney divergence. Employing a finite volume-based solver for numerical analysis, we systematically scrutinize influential geometric parameters, including collector height (hi = 1.85 to 0.1 m), chimney inlet diameter (dch = 10.16 to 55.88 m), and chimney outlet diameter (do = 10.16 to 30.48 m). Our findings demonstrate that reducing the collector inlet height consistently leads to increased power output. The optimal collector inlet height of hi = 0.2 m results in a significant power increase from 51 to 117.42 kW (~ 2.3 times) without additional installation costs, accompanied by an efficiency of 0.25%. Conversely, enlarging the chimney diameter decreases the chimney base velocity and suction pressure. However, as turbine-driven power generation rises, the flow becomes stagnant beyond a chimney diameter of 45.72 m. At this point, power generation reaches 209 kW, nearly four times greater than the Manzanares plant, with an efficiency of 0.44%. Nevertheless, the cost of expanding the chimney diameter is substantial. Furthermore, the impact of chimney divergence is evident, with power generation, collector efficiency, overall efficiency, and collector inlet velocity all peaking at an outer chimney diameter of 15.24 m (corresponding to an area ratio of 2.25). At this configuration, power generation increases to 75.91 kW, approximately 1.5 times more than the initial design. Remarkably, at a low collector inlet height of 0.2 m, combining it with a chimney diameter of 4.5 times the chimney inlet diameter (4.5dch) results in an impressive power output of 635.02 kW, signifying a substantial 12.45-fold increase. To model the performance under these diverse conditions, an artificial neural network (ANN) is effectively utilized. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-45190 SN - 2045-2322 N1 - Data availability declaration: The data that support the findings of this scientific publication are available from the corresponding author upon reasonable request. Funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) - 532148125 and supported by the central publication fund of Hochschule Düsseldorf University of Applied Sciences VL - 14 IS - 1 PB - Springer Nature ER - TY - RPRT A1 - Failing, Luisa A1 - Kaluza, Stefan A1 - Strucks, Peter T1 - Power2Gas - Katalytische Methanisierung von CO₂ als Baustein einer erfolgreichen Energie- und Rohstoffwende N2 - Die katalytische Methanisierung von Kohlendioxid (CO2) mit Hilfe von elektrolytisch erzeugtem Wasserstoff (H2) aus erneuerbaren Energiequellen kann einen wichtigen Beitrag zur Reduktion von CO2-Emissionen leisten. Aufgrund einer immer stärker fluktuierenden Energie- und Rohstoffbereitstellung spielt die Möglichkeit einer flexiblen, dynamischen Betriebsweise eine zunehmend große Rolle für zukünftige Technologien. Dies bedingt auch im Fall der katalytischen Methanisierung umfangreiche Untersuchungen, um zu ermitteln, inwieweit eine dynamische Fahrweise Auswirkungen auf Prozess und Katalysator besitzt. An diesem Punkt setzte das HiFF-Projekt Power2Gas an. So wurden verschiedene nickelbasierte Katalysatorsysteme synthetisiert, wobei sich der via Imprägnierung hergestellte Ni/Al2O3-Katalysator sowohl aufgrund seiner guten Leistung als auch der praktikablen und reproduzierbaren Herstellung als geeignetes Benchmark-System für weitere Untersuchungen - vor allem im kinetischen Bereich - erwies. Während umfassender Parametervariationen wurden kinetische Datensätze im stationären Zustand bestimmt, die zur Modellierung der katalysierten CO2-Methanisierung verwendet werden können. Darüber hinaus wurden in ausgewählten Versuchsreihen die isotherme Temperaturkontrolle und eine ausreichende Langzeitstabilität sichergestellt sowie makrokinetische Diffusionsbeschränkungen ausgeschlossen. Die Ergebnisse wurden in einer peer-review-Publikation veröffentlicht und auf zwei Konferenzen präsentiert. Sie waren zudem die Basis für eine erfolgreiche Masterarbeit und flossen in die Antragstellung im Rahmen des DFG-Programms „Großgeräteaktion für Hochschulen für Angewandte Wissenschaften“ ein. N2 - The catalytic methanation of carbon dioxide (CO2) using electrolytically produced hydrogen (H2) from renewable energy sources represents a potential option for reducing CO2 emissions. Due to an increasingly fluctuating availability of energy and raw materials, the need for flexible, dynamic operation is becoming ever more crucial for future technologies. In the case of catalytic methanation, this also requires further investigations to determine the impact of dynamic operation on the process and catalysts. This is where the HiFF Power2Gas project comes in. Various nickel-based catalyst systems were synthesized. The Ni/Al2O3 catalyst produced via impregnation was identified as a suitable benchmark system for further investigations - particularly in the kinetic range - due to its good performance as well as its simple and reproducible synthesis. By thorough parameter variation, kinetic data sets were determined in steady state, which can be used to model catalyzed CO2 methanation. In addition, isothermal temperature control and long-term stability were ensured in a series of selected experiments, while macro-kinetic diffusion limitations could be ruled out. The results were published in a peer-reviewed publication and presented at two conferences. They were also fundamental for a successful master's thesis and were used in an application for the DFG program "Großgeräteaktion für Hochschulen für Angewandte Wissenschaften". T3 - Berichte zu HSD-intern geförderten Forschungsprojekten - 4 KW - Dekarbonisierung KW - Dynamische Betriebsweise KW - Nickel-Katalysator KW - Deaktivierung KW - Power-to-X KW - CO₂ Methanisierung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-45143 SN - 2625-3690 CY - Düsseldorf ER - TY - JOUR A1 - Münch, Justin A1 - Priesmann, Jan A1 - Reich, Marius A1 - Tillmanns, Marius A1 - Praktiknjo, Aaron A1 - Adam, Mario T1 - Uplifting the Complexity of Analysis for Probabilistic Security of Electricity Supply Assessments using Artificial Neural Networks JF - Energy and AI N2 - The energy sector faces rapid decarbonisation and decision-makers demand reliable assessments of the security of electricity supply. For this, detailed simulation models with a high temporal and technological resolution are required. When confronted with increasing weather-dependent renewable energy generation, probabilistic simulation models have proven. The significant computational costs of calculating a scenario, however, limit the complexity of further analysis. Advances in code optimization as well as the use of computing clusters still lead to runtimes of up to eight hours per scenario. However ongoing research highlights that tailor-made approximations are potentially the key factor in further reducing computing time. Consequently, current research aims to provide a method for the rapid prediction of widely varying scenarios. In this work artificial neural networks (ANN) are trained and compared to approximate the system behavior of the probabilistic simulation model. To do so, information needs to be sampled from the probabilistic simulation in an efficient way. Because only a limited space in the whole design space of the 16 independent variables is of interest, a classification is developed. Finally it required only around 35 minutes to create the regression models, including sampling the design space, simulating the training data and training the ANNs. The resulting ANNs are able to predict all scenarios within the validity range of the regression model with a coefficient of determination of over 0.9998 for independent test data (1.051.200 data points). They need only a few milliseconds to predict one scenario, enabling in-depth analysis in a brief period of time. KW - Security of electricity supply KW - Probabilistic simulation KW - Metamodeling KW - Artificial neural networks KW - Regression Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-45359 SN - 2666-5468 N1 - Funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) - 532148125 and supported by the central publication fund of Hochschule Düsseldorf University of Applied Sciences. PB - Elsevier ER - TY - RPRT A1 - Deckert, Carsten A1 - Kretschmar, Dominik A1 - Plagge, Christoph T1 - Auf einen gemeinsamen Nenner gebracht? – Reporting der Treibhausgas-Emissionen der Logistikunternehmen in Deutschland T3 - Working Papers in Industrial Engineering - 6 KW - Logistik KW - Nachhaltigkeit KW - Treibhausgasemissionen Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-43130 SN - 2627-8375 CY - Düsseldorf ER - TY - JOUR A1 - Niemann, Jörg A1 - Basson, A. A1 - Fussenecker, Claudia A1 - Kruger, K. A1 - Schlösser, M. A1 - Turek, S. A1 - Amarnath, H. Umadevi T1 - Implementation of Eye-Tracking Technology in Holonic Manufacturing Systems JF - Procedia - Social and Behavioral Sciences Y1 - 2018 U6 - https://doi.org/10.1016/j.sbspro.2018.03.005 VL - 238 SP - 37 EP - 45 PB - Elsevier ER - TY - JOUR A1 - Priesmann, Jan A1 - Münch, Justin A1 - Tillmanns, Marius A1 - Ridha, E. A1 - Spiegel, T. A1 - Reich, Marius A1 - Adam, Mario A1 - Nolting, L. A1 - Praktiknjo, Aaron T1 - Artificial intelligence and design of experiments for resource adequacy assessment in power systems JF - Energy Strategy Reviews KW - KiVi KW - Design of experiments KW - Resource adequacy KW - Security of supply KW - Artificial intelligence Y1 - 2024 U6 - https://doi.org/10.1016/j.esr.2024.101368 SN - 2211-467X VL - 53 PB - Elsevier ER - TY - INPR A1 - Priesmann, Jan A1 - Münch, Justin A1 - Ridha, Elias A1 - Spiegel, Thomas A1 - Reich, Marius A1 - Adam, Mario A1 - Nolting, Lars A1 - Praktiknjo, Aaron T1 - Artificial Intelligence and Design of Experiments for Assessing Security of Electricity Supply: A Review and Strategic Outlook N2 - Assessing the effects of the energy transition and liberalization of energy markets on resource adequacy is an increasingly important and demanding task. The rising complexity in energy systems requires adequate methods for energy system modeling leading to increased computational requirements. Furthermore, with complexity, uncertainty increases likewise calling for probabilistic assessments and scenario analyses. To adequately and efficiently address these various requirements, new methods from the field of data science are needed to accelerate current methods. With our systematic literature review, we want to close the gap between the three disciplines (1) assessment of security of electricity supply, (2) artificial intelligence, and (3) design of experiments. For this, we conduct a large-scale quantitative review on selected fields of application and methods and make a synthesis that relates the different disciplines to each other. Among other findings, we identify metamodeling of complex security of electricity supply models using AI methods and applications of AI-based methods for forecasts of storage dispatch and (non-)availabilities as promising fields of application that have not sufficiently been covered, yet. We end with deriving a new methodological pipeline for adequately and efficiently addressing the present and upcoming challenges in the assessment of security of electricity supply. Y1 - 2021 U6 - https://doi.org/https://doi.org/10.48550/arXiv.2112.04889 ER - TY - CHAP A1 - Backes, Klaus A1 - Adam, Mario A1 - Wirth, Hans Peter A1 - Götzelmann, Dennis A1 - Helbig, Sonja A1 - Eggert, Daniel ED - Häberle, Andreas T1 - Efficient Design of Solar Assisted Heating Systems for Multi-Family Houses T2 - Proceedings of EuroSun 2018, 12th International Conference on Solar Energy for Buildings and Industry, 10.-13.09.2018, Rapperswil / Switzerland, International Solar Energy Society KW - SUW-MFH Y1 - 2018 SN - 978-3-9820408-0-6 U6 - https://doi.org/10.18086/eurosun2018.01.02​ SP - 1 EP - 9 PB - International Solar Energy Society CY - Freiburg ER - TY - JOUR A1 - Henin, S. A1 - Stelmaszczyk, K. A1 - Petrarca, M. A1 - Rohwetter, P. A1 - Hao, Z. Q. A1 - Lüder, J. A1 - Petit, Y. A1 - Vogel, A. A1 - Weber, Konradin A1 - Kasparian, J. A1 - Wöste, L. A1 - Wolf, J.-P. T1 - Laser Filament Induced Water Condensation JF - EPJ Web of Conferences N2 - C Owned by the authors, published by EDP Sciences, 2013 Y1 - 2013 U6 - https://doi.org/10.1051/epjconf/20134112008 VL - 41 PB - edp sciences ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Gobinda Das, Sampad A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal A1 - Moghimi, M. A. T1 - Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Microchannel under Pulsating Inlet Flow Condition JF - E3S Web of Conferences Y1 - 2019 U6 - https://doi.org/10.1051/e3sconf/201912801011 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Kacso-Vidrean, Lorand A1 - Niemann, Jörg A1 - Baidoc, Raluca A1 - Pisla, Adrian T1 - Change Management Aspects in Solar Energy Implementation JF - Procedia - Social and Behavioral Sciences KW - FliX Y1 - 2018 U6 - https://doi.org/10.1016/j.sbspro.2018.04.021 VL - 238 SP - 432 EP - 441 PB - Elsevier ER - TY - JOUR A1 - Dehmer, Joanna A1 - Niemann, Jörg T1 - Value Chain Management Through Cloud-based Platforms JF - Procedia - Social and Behavioral Sciences Y1 - 2018 U6 - https://doi.org/10.1016/j.sbspro.2018.03.021 N1 - PII: S1877042818300211 VL - 238 SP - 177 EP - 181 PB - Elsevier ER - TY - BOOK A1 - Marzi, Thomas A1 - Deerberg, Görge A1 - Dötsch, Christian A1 - Grevé, Anna A1 - Hiebel, Markus A1 - Stefan Kaluza, A1 - Knappertsbusch, Volker A1 - Maga, Daniel A1 - Müller, Torsten A1 - Pflaum, Hartmut A1 - Pohlig, Astrid A1 - Renner, Manfred A1 - Seifert, Ulrich A1 - Stießel, Sebastian A1 - Unger, Christoph A1 - Wack, Thorsten A1 - Weidner, Eckhard T1 - Kohlendioxid, Biomasse und Regenerativer Strom - Ressourcen einer neuen Kohlenstoffwirtschaft? Y1 - 2017 SN - 978-3-87468-358-6 U6 - https://doi.org/10.24406/UMSICHT-N-473349 VL - Umsicht-Diskurs IS - 1 PB - Fraunhofer-Institut für Umwelt-, Sicherheit- und Energietechnik CY - Oberhausen ER - TY - JOUR A1 - Birmili, Wolfram A1 - Rehn, Johanna A1 - Vogel, Andreas A1 - Boehlke, Christoph A1 - Weber, Konradin A1 - Rasch, Fabian T1 - Micro-scale variability of urban particle number and mass concentrations in Leipzig, Germany JF - Meteorologische Zeitschrift Y1 - 2013 U6 - https://doi.org/10.1127/0941-2948/2013/0394 VL - 22 IS - 2 SP - 155 EP - 165 PB - Bornträger ER - TY - JOUR A1 - Zander, Nils A1 - Kollmannsberger, Stefan A1 - Ruess, Martin A1 - Yosibash, Z. A1 - Rank, Ernst T1 - The Finite Cell Method for linear thermoelasticity JF - Computers & Mathematics with Applications Y1 - 2012 U6 - https://doi.org/10.1016/j.camwa.2012.09.002 SN - 0898-1221 N1 - Open Archiv VL - 64 IS - 11 SP - 3527 EP - 3541 PB - Elsevier ER - TY - JOUR A1 - Guo, Yujie A1 - Ruess, Martin T1 - Weak Dirichlet boundary conditions for trimmed thin isogeometric shells JF - Computers & Mathematics with Applications Y1 - 2015 U6 - https://doi.org/10.1016/j.camwa.2015.06.012 SN - 0898-1221 N1 - Open Archiv VL - 70 IS - 7 SP - 1425 EP - 1440 PB - Elsevier ER - TY - JOUR A1 - Deckert, Carsten A1 - Kalefeld, Jannik A1 - Kutz, Martin T1 - Geschäftsmodelle für das Internet der Dinge: Welche Geschäftsmodellinnovation passt zum Unternehmen? JF - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb Y1 - 2020 U6 - https://doi.org/10.3139/104.112265 SN - 0947-0085 VL - 115 IS - 12 SP - 928 EP - 933 PB - Hanser ER - TY - JOUR A1 - Carapezza, M. L. A1 - Barberi, F. A1 - Ranaldi, M. A1 - Ricci, T. A1 - Tarchini, L. A1 - Barrancos, J. A1 - Fischer, C. A1 - Granieri, D. A1 - Lucchetti, C. A1 - Melian, G. A1 - Perez, N. A1 - Tuccimei, P. A1 - Vogel, A. A1 - Weber, Konradin T1 - Hazardous gas emissions from the flanks of the quiescent Colli Albani volcano (Rome, Italy) JF - Applied Geochemistry Y1 - 2012 UR - https://doi.org/10.1016/j.apgeochem.2012.02.012 U6 - https://doi.org/10.1016/j.apgeochem.2012.02.012 VL - 27 IS - 9 SP - 1767 EP - 1782 PB - Elsevier ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Banerjee, Arnab A1 - Benim, Ali Cemal T1 - Heat transfer and flow field in a circular twisted channel JF - MATEC Web of Conferences Y1 - 2018 U6 - https://doi.org/10.1051/matecconf/201824001005 VL - 240 PB - edp sciences ER - TY - JOUR A1 - Taymaz, Imdat A1 - Aslan, Erman A1 - Benim, Ali Cemal T1 - Numerical investigation of incompressible fluid flow and heat transfer across a bluff body in a channel flow JF - Thermal Science Y1 - 2015 U6 - https://doi.org/10.2298/tsci120220145t VL - 19 IS - 2 SP - 537 EP - 547 PB - doiSerbia ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Syed, Khawar, J., T1 - Laminar flamelet modelling of turbulent premixed combustion JF - Applied Mathematical Modelling Y1 - 1998 UR - https://doi.org/10.1016/s0307-904x(98)00012-2 U6 - https://doi.org/10.1016/s0307-904x(98)00012-2 N1 - C 1998 Elsevier Science Inc.All rights reserve VL - 22 IS - 1-2 SP - 113 EP - 136 PB - Elsevier ER - TY - JOUR A1 - Guo, Yujie A1 - Heller, Jason A1 - Hughes, Thomas J.R. A1 - Ruess, Martin A1 - Schillinger, Dominik T1 - Variationally consistent isogeometric analysis of trimmed thin shells at finite deformations, based on the STEP exchange format JF - Computer Methods in Applied Mechanics and Engineering Y1 - 2018 U6 - https://doi.org/10.1016/j.cma.2018.02.027 SN - 0045-7825 N1 - Open Manuscript https://www.sciencedirect.com/science/article/am/pii/S0045782518301075 VL - 336 SP - 39 EP - 79 PB - Elsevier ER - TY - JOUR A1 - Groen, Jeroen P. A1 - Langelaar, Matthijs A1 - Sigmund, Ole A1 - Ruess, Martin T1 - Higher-order multi-resolution topology optimization using the finite cell method JF - International Journal for Numerical Methods in Engineering Y1 - 2017 U6 - https://doi.org/10.1002/nme.5432 SN - 1097-0207 VL - 110 IS - 10 SP - 903 EP - 920 PB - Wiley ER - TY - JOUR A1 - Junge Puring, Kai A1 - Piontek, Stefan A1 - Smialkowski, Mathias A1 - Burfeind, Jens A1 - Kaluza, Stefan A1 - Doetsch, Christian A1 - Apfel, Ulf-Peter T1 - Simple Methods for the Preparation of Non-noble Metal Bulk-electrodes for Electrocatalytic Applications JF - Journal of visualized experiments : JoVE N2 - The rock material pentlandite with the composition Fe4.5Ni4.5S8 was synthesized via high temperature synthesis from the elements. The structure and composition of the material was characterized via powder X-ray diffraction (PXRD), Mössbauer spectroscopy (MB), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and energy dispersive X-ray spectroscopy (EDX). Two preparation methods of pentlandite bulk electrodes are presented. In the first approach a piece of synthetic pentlandite rock is directly contacted via a wire ferrule. The second approach utilizes pentlandite pellets, pressed from finely ground powder, which is immobilized in a Teflon casing. Both electrodes, whilst being prepared by an additive-free method, reveal high durability during electrocatalytic conversions in comparison to common drop-coating methods. We herein showcase the striking performance of such electrodes to accomplish the hydrogen evolution reaction (HER) and present a standardized method to evaluate the electrocatalytic performance by electrochemical and gas chromatographic methods. Furthermore, we report stability tests via potentiostatic methods at an overpotential of 0.6 V to explore the material limitations of the electrodes during electrolysis under industrial relevant conditions. Y1 - 2017 UR - http://www.ncbi.nlm.nih.gov/pubmed/28671654 U6 - https://doi.org/10.3791/56087 SN - 1940-087X IS - 124 PB - JoVE ER - TY - JOUR A1 - Girod, Kai A1 - Breitkreuz, Klaas A1 - Henning, Torsten A1 - Lohmann, Heiko A1 - Kaluza, Stefan A1 - Schluter, Stefan T1 - Steel Mills as Syngas Source for Methanol Synthesis: Simulation and Practical Performance Investigations JF - Chemical Engineering Transactions N2 - In the present contribution, the utilization of steel-mill gases for an industrial methanol synthesis process is described. The focus of this work is on the influence of syngas compositions derived from steel-mill gases on an industrial Cu/ZnO/Al2O3 catalyst. Elevated CO2 and H2O concentrations seem to have an irreversible impact on the activity of the catalyst. In order to obtain realistic gas composition for the catalyst tests, a process simulation of the methanol synthesis was conducted. The calculated gas compositions at the reactor inlet were applied in a practical test in order to evaluate the catalyst stability under steel mill gas conditions. No noticeable deactivation was observed. KW - DOAJ Y1 - 2019 SN - 978-88-95608-71-6 U6 - https://doi.org/10.3303/CET1974080 SN - 2283-9216 VL - 74 SP - 475 EP - 480 PB - AIDIC ER - TY - CHAP A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Ille, Fabian A1 - Wirth, Hans Peter T1 - Bestandsaufnahme von solarthermischen Großanlagen aus den Förderprogrammen Solarthermie-2000 und Solarthermie2000plus T2 - 26. Symposium Thermische Solarenergie 2016, 20.-22.04.2016, Bad Staffelstein KW - ST2000-LangEff Y1 - 2016 UR - http://docplayer.org/78153296-Bestandsaufnahme-von-solarthermischen-grossanlagen-aus-den-foerderprogrammen-solarthermie-2000-und-solarthermie2000plus.html CY - Bad Staffelstein ER - TY - CHAP A1 - Lippel, Jens A1 - Becker, Martin A1 - Zielke, Thomas ED - Obaidat, Mohammad S. ED - Ören, Tuncer ED - Szczerbicka, Helena T1 - Modeling Dynamic Processes with Deep Neural Networks: A Case Study with a Gas-fired Absorption Heat Pump T2 - SIMULTECH 2019: Proceedings of the 9th International Conference on Simulation and Modeling Methodologies, Technologies and Applications : Prague, Czech RepublicJuly 29-31, 2019 Y1 - 2019 SN - 978-989-758-381-0 U6 - https://doi.org/10.5220/0007932903170326 SP - 317 EP - 326 PB - INSTICC ER - TY - CHAP A1 - Faber, Christian A1 - Anthrakidis, Anette A1 - Lanz, Marco A1 - Rusack, Markus A1 - Weis, Fabian A1 - Adam, Mario A1 - Schramm, Sebastian T1 - Barriers to solar process heat applications, T2 - SWC 2011: ISES Solar World Congress, 28 August - 2 September 2011, Kassel, Germany KW - Solare-Prozesswärme-Standards Y1 - 2011 UR - https://proceedings.ises.org/swc2011/proceedings/PDF/Papers.pdf SP - 1326 EP - 1334 CY - Kassel ER - TY - CHAP A1 - Ille, Fabian A1 - Adam, Mario A1 - Wirth, Hans Peter A1 - Radosavljevic, Radojka T1 - Market and simulation analysis of PVT applications for the determination of new PVT test procedures T2 - Conference Proceedings EuroSun 2014, 16.-19.09.2014, Aix-les-Bains KW - PVT-Norm Y1 - 2014 UR - http://proceedings.ises.org/paper/eurosun2014/eurosun2014-0048-Ille.pdf SP - 1 EP - 10 ER - TY - CHAP A1 - Schramm, Sebastian A1 - Adam, Mario T1 - Speichereinbindung mit dynamischem Beladebereich im Vergleich zu anderen Speicherladekonzepten. Poster-Präsentation T2 - Gleisdorf SOLAR - 12. Internationale Konferenz für solares Heizen und Kühlen, 08.-10.06.2016, Gleisdorf/Austria KW - Solare-Prozesswärme-Standards Y1 - 2016 UR - https://www.aee-intec.at/0uploads/dateien1152.pdf SP - 433 EP - 441 ER - TY - CHAP A1 - Helbig, Sonja A1 - Steinweg, Jan A1 - Eggert, Daniel A1 - Adam, Mario ED - Martinez, Victor ED - Gonzales, Jose T1 - Performance Testing and Optimization of Solar Assisted Heating Systems for Multi Family Houses T2 - EuroSun 2016 - Proceedings 11th ISES EuroSun Conference, 11. -14.10.2016, Palma (Mallorca), Spain KW - SUW-MFH Y1 - 2016 SN - 978-3-9814659-6-9 U6 - https://doi.org/10.18086/eurosun.2016.04.13 SP - 1 EP - 10 ER - TY - JOUR A1 - Schulzke, Tim A1 - Conrad, Stefan A1 - Kaluza, Stefan A1 - van Loo, Tom T1 - Upgrading of fast pyrolysis condensates via esterification with higher alcohols JF - Biomass and Bioenergy Y1 - 2017 U6 - https://doi.org/10.1016/j.biombioe.2017.05.010 SN - 0961-9534 N1 - Postprint ist veröffentlicht unter: http://publica.fraunhofer.de/dokumente/N-446003.html VL - 103 SP - 11 EP - 20 PB - Elsevier ER - TY - CHAP A1 - Kampann, Maximilian A1 - Goebel, Johannes A1 - Adam, Mario ED - Wesselak, Viktor T1 - Effizienzuntersuchungen an einem Wärmepumpensystem mit Schichtspeicher für Raumheizung und Trinkwarmwasser anhand von Hardware-in-the-Loop Versuchen T2 - Tagungsband: 6. Regenerative Energietechnik Konferenz in Nordhausen, 9.-10.2.2023 Y1 - 2023 UR - https://www.hs-nordhausen.de/fileadmin/Dateien/Forschung/2021/Tagungsband_RETCon_2023_Web.pdf SN - 978-3-940820-21-1 SP - 176 EP - 188 PB - Nordhausen CY - Hochschule Nordhausen ER - TY - GEN A1 - Adam, Mario T1 - Windheizung 2.0 – Erfolgreiche Umsetzung der EU-Nachhaltigkeitsziele T2 - hn21 Journal KW - Windheizung 2.0 Y1 - 2022 UR - https://www.hn-nrw.de/aktivitaeten/publikationen/journal/# SP - 1 EP - 1 PB - Zentrum für Forschungskommunikation CY - Köln ER - TY - CHAP A1 - Schramm, Alexander A1 - Kruger, Karl A1 - Niemann, Jörg A1 - Grote, Wolfgang ED - Dimitrov, Dimiter ED - Hagedorn-Hansen, Devon ED - Leipzig, Karl von T1 - Possibilities, Limitations and Considerations for Eye Tracking in Industrial Environments: Experience from a Case Study T2 - International Conference on Competitive Manufacturing (COMA 19) proceedings : 30 January 2019-1 February 2019, Stellenbosch, South Africa N2 - Eye tracking is a measurement technique for determining the orientation and viewing direction of an individual’s eyes. It allows for an evaluation of the individual’s gaze and other related information.There is a wide variety of application areas for eye tracking, however the usage in engineeringindustry is still limited. This paper presents a case study for the use of eye tracking in a testingstation for electrical circuit breakers. The case study aims to evaluate the measurement and analysispossible with the Tobii wearable eye tracking system. From the case study, possibilities, limitationsand considerations for eye tracking in industrial settings are identified and discussed. The paperconcludes that while eye tracking can be used to effectively capture and visualize insightfulinformation, it faces major challenges related to subjectivity in analysis and labour intensiveness. KW - Eye Tracking Y1 - 2019 SN - 978-0-7972-1779-9 SP - 390 EP - 396 PB - Department of Industrial Engineering, Stellenbosch University CY - Stellenbosch ER - TY - JOUR A1 - Niemann, Joerg A1 - Fussenecker, Claudia A1 - Schloesser, Martin A1 - Ocakci, Elif T1 - THE WORKERS PERSPECTIVE - EYE TRACKING IN PRODUCTION ENVIRONMENTS JF - ACTA TECHNICA NAPOCENSIS SERIES-APPLIED MATHEMATICS MECHANICS AND ENGINEERING Y1 - 2021 SN - 1221-5872 VL - 64 IS - 1 SP - 7 EP - 14 PB - Technical University of Cluj-Napoca ER - TY - CHAP A1 - Beckers, Sebastian A1 - Pawlik, Julian A1 - Kiel, Jürgen A1 - Grote, Wolfgang T1 - Simulation von Partikelflugbahnen zur Auslegungshilfe von elektrostatischen Luftfiltern T2 - Tagungsband: ASIM Workshop 2019 - Simulation Technischer Systeme Grundlagen und Methoden in Modellbildung und Simulation, 21.-22. Februar 2019, Braunschweig Y1 - 2019 SN - 978-3-901608-06-3 U6 - https://doi.org/10.11128/arep.57 SP - 147 EP - 152 PB - ARGESIM, ASIM CY - Wien ER - TY - JOUR A1 - Galban, Craig A1 - Maderwald, Stefan A1 - Eggebrecht, Holger A1 - Grote, Wolfgang A1 - de Greiff, A. A1 - Uffmann, K. A1 - Ladd, M. E. T1 - Monitoring the Effects of Chronic Obstructive Pulmonary Disease on Muscle Elasticity by MR Elastography JF - Proc. Intl. Soc. Mag. Reson. Med. N2 - Men afflicted with chronic obstructive pulmonary disease (COPD) show signs of muscle dysfunction, such as increased muscle fatigue and acidosis during exercise. We hypothesize that muscle elasticity of the lower extremities differs between patients with COPD and age-related controls. The shear modulus of the soleus muscle was measured non-invasively using MR elastography (MRE) at 0%, 5%, 10%, 15%, and 20% of the subject’s maximum applied force. The results from this study showed statistical differences between the patients and controls, even though there were no statistical differences in the maximum applied force. Y1 - 2005 UR - https://cds.ismrm.org/protected/05MProceedings/PDFfiles/02015.pdf VL - 13 SP - 2015 ER - TY - THES A1 - Grote, Wolfgang T1 - Ein Beitrag zur modellbasierten Regelung von Entnahmedampfturbinen KW - Dynamische Modellierung KW - Dampfturbine KW - Prädiktive Regelung KW - Dampfkraftwerk Y1 - 2009 UR - https://hss-opus.ub.ruhr-uni-bochum.de/opus4/2109 PB - Bochum ER - TY - JOUR A1 - Prata, A. J. A1 - Dezitter, F. A1 - Davies, I. A1 - Weber, Konradin A1 - Birnfeld, M. A1 - Moriano, D. A1 - Bernardo, C. A1 - Vogel, A. A1 - Prata, G. S. A1 - Mather, T. A. A1 - Thomas, H. E. A1 - Cammas, J. A1 - Weber, M. T1 - Artificial cloud test confirms volcanic ash detection using infrared spectral imaging JF - Scientific reports N2 - Airborne volcanic ash particles are a known hazard to aviation. Currently, there are no means available to detect ash in flight as the particles are too fine (radii < 30 μm) for on-board radar detection and, even in good visibility, ash clouds are difficult or impossible to detect by eye. The economic cost and societal impact of the April/May 2010 Icelandic eruption of Eyjafjallajökull generated renewed interest in finding ways to identify airborne volcanic ash in order to keep airspace open and avoid aircraft groundings. We have designed and built a bi-spectral, fast-sampling, uncooled infrared camera device (AVOID) to examine its ability to detect volcanic ash from commercial jet aircraft at distances of more than 50 km ahead. Here we report results of an experiment conducted over the Atlantic Ocean, off the coast of France, confirming the ability of the device to detect and quantify volcanic ash in an artificial ash cloud created by dispersal of volcanic ash from a second aircraft. A third aircraft was used to measure the ash in situ using optical particle counters. The cloud was composed of very fine ash (mean radii ~10 μm) collected from Iceland immediately after the Eyjafjallajökull eruption and had a vertical thickness of ~200 m, a width of ~2 km and length of between 2 and 12 km. Concentrations of ~200 μg m(-3) were identified by AVOID at distances from ~20 km to ~70 km. For the first time, airborne remote detection of volcanic ash has been successfully demonstrated from a long-range flight test aircraft. Y1 - 2016 U6 - https://doi.org/10.1038/srep25620 VL - 6 PB - Springer Nature ER - TY - JOUR A1 - Galban, Craig A1 - Maderwald, Stefan A1 - Herrmann, Burkhard A1 - Brauck, K. A1 - Grote, Wolfgang A1 - de Greiff, A. A1 - Uffmann, K. A1 - Ladd, M. T1 - Measuring Skeletal Muscle Elasticity in Patients with Hypogonadism by MR Elastography JF - Proc. Intl. Soc. Mag. Reson. Med. N2 - Men afflicted with hypogonadism have reduced fat-free mass and in some cases a loss in muscle strength. We hypothesize that muscle elasticity of the lower extremities differs between patients with hypogonadism and healthy controls. The shear modulus of the soleus muscle was measured non-invasively using MR elastography (MRE) at 0%, 5%, 10%, 15%, and 20% of the subject’s maximum applied force. The results from this study showed statistical differences between the patients and controls, even though there were no statistical differences in applied force. Y1 - 2005 UR - https://cds.ismrm.org/protected/05MProceedings/PDFfiles/02016.pdf VL - 13 SP - 2016 ER - TY - JOUR A1 - Willers, Christoph A1 - Deckert, Carsten T1 - eFood in Deutschland JF - Der Betriebswirt N2 - Im Vergleich zu „Pionierbranchen“ wie Mode oder Medien steht der Online-Handel mit Lebensmitteln erst am Anfang. Dabei kann dieser zu einem Wettbewerbsvorteil werden – wenn der Handel es richtig angeht. Auf der anderen Seite steht das Risiko einer strategischen Falle, d.h. es wird unter Umständen aufgrund der Widerstände beim Verbraucher nur ein Nischenmarkt bedient, der eine geringe Profitabilität aufweist. Im Spannungsfeld „Marktpotenzial auf Handelsseite“ vs. „Zurückhaltung beim Verbraucher“ rücken dabei Fragen der Kommunikationspolitik im Online-Lebensmittelhandel in den Fokus. Für eine erfolgreiche Umsetzung stellt eine eindeutige Typologie eine notwendige Basis dar, um die konkreten Bedürfnisse potenzieller Konsumenten anzusprechen. Ein Engagement im eFood-Bereich ist daher als Investition in die zukünftige Entwicklung der Märkte und ihrer Zielgruppen zu betrachten. Although online trading in the food sector is still in early stages, it may become a competitive edge – if retailers go about it the right way. On the other hand, due to consumer resistance, there is the risk of serving only a niche market, which cannot be maintained in terms of profitability. Therefore, a stronger focus on communication policies is needed. Engaging in the eFood sector finally has to be seen as an important investment into future markets and their target groups. Keywords: online lebensmittelhandel, lieferfenster, informationszeitalter, face to the customer Y1 - 2015 U6 - https://doi.org/10.3790/dbw.56.4.10 VL - 56 IS - 11 SP - 10 EP - 15 PB - Duncker & Humblot ER - TY - JOUR A1 - Biedermann, Till M. A1 - Chong, Tze Pei A1 - Kameier, Frank A1 - Paschereit, Christian O. T1 - Statistical–Empirical Modeling of Airfoil Noise Subjected to Leading-Edge Serrations JF - AIAA Journal Y1 - 2017 U6 - https://doi.org/10.2514/1.j055633 VL - 55 IS - 9 SP - 3128 EP - 3142 PB - ARC ER - TY - JOUR A1 - Scherpen, F. A1 - Draghici, A. A1 - Niemann, Jörg T1 - Customer Experience Management to Leverage Customer Loyalty in the Automotive Industry JF - Procedia - Social and Behavioral Sciences Y1 - 2018 U6 - https://doi.org/10.1016/j.sbspro.2018.04.014 N1 - PII: S1877042818300442 VL - 238 SP - 374 EP - 380 PB - Elsevier ER - TY - JOUR A1 - Gaida, Daniel A1 - Wolf, Christian A1 - Meyer, C. A1 - Stuhlsatz, André A1 - Lippel, Jens A1 - Bäck, T. A1 - Bongards, M. A1 - McLoone, S. T1 - State estimation for anaerobic digesters using the ADM1 JF - Water science and technology N2 - The optimization of full-scale biogas plant operation is of great importance to make biomass a competitive source of renewable energy. The implementation of innovative control and optimization algorithms, such as Nonlinear Model Predictive Control, requires an online estimation of operating states of biogas plants. This state estimation allows for optimal control and operating decisions according to the actual state of a plant. In this paper such a state estimator is developed using a calibrated simulation model of a full-scale biogas plant, which is based on the Anaerobic Digestion Model No.1. The use of advanced pattern recognition methods shows that model states can be predicted from basic online measurements such as biogas production, CH4 and CO2 content in the biogas, pH value and substrate feed volume of known substrates. The machine learning methods used are trained and evaluated using synthetic data created with the biogas plant model simulating over a wide range of possible plant operating regions. Results show that the operating state vector of the modelled anaerobic digestion process can be predicted with an overall accuracy of about 90%. This facilitates the application of state-based optimization and control algorithms on full-scale biogas plants and therefore fosters the production of eco-friendly energy from biomass. Y1 - 2012 U6 - https://doi.org/10.2166/wst.2012.286 VL - 66 IS - 5 SP - 1088 EP - 1095 PB - IWA Publishing ER - TY - JOUR A1 - Biedermann, Till M. A1 - Reich, Marius A1 - Kameier, Frank A1 - Adam, Mario T1 - Assessment of statistical sampling methods and approximation models applied to aeroacoustic and vibroacoustic problems JF - Advances in Aircraft and Spacecraft Science KW - artificial neural networks KW - design of experiments KW - Latin hypercube sampling KW - aeroacoustics KW - aerodynamics KW - spectral analysis Y1 - 2019 UR - http://www.techno-press.org/content/?page=article&journal=aas&volume=6&num=6&ordernum=7 U6 - https://doi.org/10.12989/aas.2019.6.6.531 SN - 2287-528X VL - 6 IS - 6 SP - 529 EP - 550 PB - Techno Press ER - TY - CHAP A1 - Münch, Justin A1 - Reich, Marius A1 - Adam, Mario ED - Wesselak, Viktor T1 - Entwicklung eines Tools zur automatisierten Optimierung von Energiesystemen durch Maschinelles Lernen T2 - Tagungsband, RETCon – 3. Regenerative Energietechnik Konferenz, 13.-14.02.2020, Nordhausen KW - Fast-Energy-Design Y1 - 2020 SN - 978-3-940820-16-7 U6 - https://doi.org/10.22032/dbt.46243 SP - 152 EP - 156 PB - Hochschule Nordhausen CY - Nordhausen ER - TY - JOUR A1 - Elíasson, Jónas A1 - Palsson, Asgeir A1 - Weber, Konradin T1 - Monitoring ash clouds for aviation JF - Nature Y1 - 2011 U6 - https://doi.org/10.1038/475455b VL - 475 IS - 7357 PB - Springer Nature ER - TY - CHAP A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Reich, Marius A1 - Götzelmann, Dennis T1 - BestHeatNet – Selbstlernende Betriebsoptimierung einer hybriden Nahwärmeversorgung T2 - Der Geothermiekongress, 19.-21.11.2019, München KW - BestHeatNet Y1 - 2019 UR - https://www.der-geothermiekongress.de/fileadmin/user_upload/DGK/DGK_2019/Teilnahme/P12_Gottschald_BestHeatNet-124.pdf CY - München ER - TY - CHAP A1 - Gottschald, Jonas A1 - Reich, Marius A1 - Adam, Mario ED - Hochschule Nordhausen, T1 - Multikriterielle Auslegung der Energieversorgung eines Nahwärmenetzes T2 - RET.Con 2018: Tagungsband : 1. Regenerative Energietechnik-Konferenz in Nordhausen 8.-9. Februar 2018 KW - Fast-Energy-Design Y1 - 2018 UR - https://www.db-thueringen.de/receive/dbt_mods_00045831 SP - 141 EP - 148 PB - Hochschule Nordhausen CY - Nordhausen ER - TY - GEN A1 - Adam, Mario A1 - Lohmann, Sandra T1 - Vermessung der Yazaki-Absorptionskältemaschine WFC-SC5 T2 - KI Kälte - Luft - Klimatechnik KW - Solare Kühlung Y1 - 2014 UR - https://www.ki-portal.de/wp-content/uploads/2014/02/KI_2014_01-02_Wissenschaft_Lohmann.pdf SN - 1865-5432 VL - 50 IS - 1/2 SP - 26 EP - 30 PB - Hüthig ER - TY - GEN A1 - Kowalski, M. A1 - Adam, Mario A1 - Backes, Klaus T1 - Vermessung der SorTech-Adsorptionskältemaschine ACS 08 T2 - KI Kälte - Luft - Klimatechnik KW - Coolplan Y1 - 2015 UR - https://www.ki-portal.de/wp-content/uploads/2015/10/KI_2015_08-09_Wissenschaft_Adam.pdf SN - 1865-5432 VL - 51 IS - 10 SP - 26 EP - 30 PB - Hüthig ER - TY - GEN A1 - Wirth, Hans Peter A1 - Gottschald, Jonas A1 - Ille, Fabian A1 - Adam, Mario T1 - Monitoring von Solarthermieanlagen T2 - IKZ-Energy KW - ST2000-LangEff Y1 - 2018 UR - https://www.ikz.de/detail/news/detail/monitoring-von-solarthermischen-grossanlagen/ VL - 41 IS - 1/2 SP - 8 EP - 11 PB - STROBEL VERLAG ER - TY - JOUR A1 - Senthur, N.S. A1 - Anand, C A1 - Ramesh Kumar, M A1 - Elumalai, P.V. A1 - Shajahan, Mohamed Iqbal A1 - Benim, Ali Cemal A1 - Nasr, Emad Abouel A1 - Hussein, H.M.A. A1 - Parthasarathy, M. T1 - Influence of cobalt chromium nanoparticles in homogeneous charge compression ignition engine operated with citronella oil JF - Energy Science & Engineering KW - General Energy KW - Safety, Risk, Reliability and Quality KW - DOAJ Y1 - 2022 U6 - https://doi.org/10.1002/ese3.1088 SN - 2050-0505 VL - 10 IS - 4 SP - 1251 EP - 1263 PB - Wiley ER - TY - CHAP A1 - Neumann, Hannah A1 - Adam, Mario A1 - Backes, Klaus A1 - Börner, Martin A1 - Clees, Tanja A1 - Doetsch, Christian A1 - Glaeser, Susanne A1 - Herrmann, Ulf A1 - May, Johanna A1 - Rosenthal, Florian A1 - Sauer, Dirk Uwe A1 - Stadler, Ingo T1 - Development of open educational resources for renewable energy and the energy transition process T2 - ISES SWC 2021: Solar World Congress Virtual Conference, 25.-29. Oktober 2021 KW - OER4EE Y1 - 2021 U6 - https://doi.org/10.18086/swc.2021.47.03 ER - TY - JOUR A1 - Deckert, Carsten A1 - Niemann, Jörg T1 - Management des Innovationsportfolios: Portfolio-Matrizen zumManagement von Innovationsprojekten JF - WiSt - Wirtschaftswissenschaftliches Studium Y1 - 2021 U6 - https://doi.org/10.15358/0340-1650-2021-11-59 VL - 50 IS - 11 SP - 59 EP - 64 PB - Beck ER - TY - GEN A1 - Gottschald, Jonas A1 - Reich, Marius A1 - Adam, Mario T1 - Lernende Algorithmen - Künstliche Intelligenz für Wärmenetze T2 - hn21 Journal KW - BestHeatNet Y1 - 2021 UR - https://www.hn-nrw.de/aktivitaeten/publikationen/journal/# IS - 2021 SP - 8 EP - 8 PB - Zentrum für Forschungskommunikation CY - Köln ER -