TY - THES A1 - Kern, Mirco T1 - Optimierung der drahtlosen Kommunikation zwischen Komponenten mit Contiki-Betriebssystem in Hinblick auf Datendurchsatz, Energieeffizienz und Sicherheit am Beispiel des WieDAS-Projektes T1 - Improvement of the wireless communication between components running with the Contiki operating system in terms of bandwith, energy efficiency and security based on the example of the WieDAS project N2 - Dieses Bachelorprojekt wurde im Labor für Informatik an der Fachhochschule Düsseldorf durchgeführt und steht im Zusammenhang mit einem Forschungsprojekt zu dem Themengebiet Ambient Assisted Living. Hauptziele des Bachelorprojektes waren die Optimierung der Kommunikation über das 6LoWPAN-Protokoll hinsichtlich der Aspekte Datendurchsatz, Energieeffizienz und der Sicherheit der Datenübertragung. Um diese Ziele zu erreichen, wurden innerhalb des Projektes ein Kommunikationsmodul und eine entsprechenden Entwicklungsplatine realisiert. Zudem wurden softwaretechnische Funktionen entwickelt, die der Anpassung des Mikrocontroller-Betriebssystems Contiki 2.5 für die Nutzung der Stromsparfunktionen des verwendeten Mikrocontrollers ATmega128RFA1 und der Verwendung des Verschlüsselungsmoduls dienen. Durch die am Ende des Projektes durchgeführten Gerätetests konnte die Erreichung der wesentlichen Projektziele verifiziert werden. Innerhalb dieser Thesis wird dem Leser neben dem Grundlagenwissen zu dem verwendeten Mikrocontroller die Vorgehensweise bei der Erstellung der Hard- und Software näher gebracht werden. N2 - This bachelor project was realized in the laboratory of computer science at the Fachhochschule Düsseldorf and is associated with a research project on the topic of Ambient Assisted Living. The main goals of the bachelor project has been the improvement of the communication over the 6LoWPAN protocol in terms of bandwith issues, energy efficiency and the security of the data transmission. To achieve these goals within the project, a communication module with a suitable development board has been realized. In addition, software-related functions have been developed that are used to adapt the microcontroller operating system Contiki 2.5 for the use of the energy-saving features of the microcontroller ATmega128RFA1 and the use of its encryption module. At the end of the project device testings has been realized to verify the attainment of the project´s main goals. Within this thesis, the reader will get the basic knowledge of the used microcontroller and the procedure of creating the hardware and software. KW - ATmega128RFA1 KW - 6LoWPAN KW - IPv6 KW - Hardware-Verschlüsselung KW - AES KW - ATmega128RFA1 KW - Hardware Encryption KW - FHD Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7203 CY - Düsseldorf ER - TY - THES A1 - Wientzek, Niels T1 - Konzeption und Implementierung eines Android-Services für das OSGi-Framework T1 - Design and implementation of an Android service for the OSGi Framework N2 - In diesem Projekt wird ein Softwaresystem entwickelt, mit dem es möglich ist ein OSGi Framework durchgängig im Hintergrund von Android zu betreiben. Für die Demonstration der Kommunikation zwischen Framework und weiteren Android Anwendungen wird eine Beispielanwendung entworfen. Im ersten Teil dieser Arbeit wird auf die technischen Grundlagen von Android sowie auf die OSGi Service Platform eingegangen. Anschließend folgt die Anforderungsanalyse, sowie die State-of-the-art-Analyse. Das Konzept wird erstellt und anschließend die Implementierung erläutert. Zum Schluss wird das Softwaresystem evaluiert und eine Zusammenfassung aller Kapitel beendet die Arbeit. N2 - In this project, a software system will be developed, which make it possible to operate an OSGi framework consistently in the background of Android. For communication between the Framework and other Android applications, a sample application is designed to demonstrate this. The first part of this thesis discusses the technology behind Android and the OSGi Service Platform. After that the requirements analysis and state-of-the-art analysis follows. The concept is created and the implementation is explained. Finally, the software system is evaluated and a summary of each chapter is at the end of this thesis. KW - OSGI KW - Android KW - Sorftwareengeneering KW - FHD Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7341 CY - Düsseldorf ER - TY - THES A1 - Kock, Stephan T1 - Körperschallmessungen an techn. Systemen T1 - Measurement of structure born sound at technical systems N2 - Diese Arbeit befasst sich mit der Entwicklung eines Messplatzes zur Erfassung von Körperschallemissionen eines technischen Systems. Der Leser dieser Arbeit soll einen Einblick in die physikalischen und normativen Grundlagen einer Körperschalluntersuchung erhalten. Er soll weiterhin in die Lage versetzt werden, den entwickelten Messplatz zu verstehen und eigenständig Prüfungen durchzuführen. N2 - This thesis discusses the development of a measurement setup to capture structure born sound emissions from technical systems. The reader of this thesis should get an insight into the physical and normative principles of structure born sound measurement. He should also be enabled to understand the developed measurement setup and to perform an examination on his own. KW - Körperschall KW - Körperschallmessung KW - Bachelor KW - Systeme KW - Körperschalluntersuchung KW - measurement KW - structure born sound KW - technical system KW - sound measurement KW - FHD Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7592 CY - Düsseldorf ER - TY - THES A1 - Moecker, Sascha T1 - Applikationsentwicklung auf dem mobilen Android System zur Interaktion mit Prozessdaten auf einer Siemens SIMATIC SPS N2 - In dieser Bachelor-Thesis werden die Möglichkeiten eines Remote-Zugriffs auf die Prozessdaten einer Siemens SIMATIC speicherprogrammierbaren Steuerung (SPS) untersucht. Der Schwerpunkt liegt auf der Interaktion mit Prozessdaten über ein mobiles Android-Gerät unter Nutzung der WLAN-Schnittstelle. Als praktischer Teil der Thesis steht daher die Entwicklung einer Android-Applikation zum Erstellen, Editieren und Ausführen grafischer Oberflächen, welche Prozessdaten anschaulich über Anzeigeelemente darstellen und eine Interaktion mit dem Anwender über Bedienelemente auf dem Bildschirm des mobilen Geräts ermöglichen. Hierzu geht die Thesis zu Beginn auf die grundlegenden Strukturen eines SIMATIC Automatisierungssystems hinsichtlich Hardware- und Softwarekomponenten sowie auf bestehende Remote-Zugriffsmöglichkeiten ein. Diese werden mit der App-Lösung verglichen und Vor- und Nachteile evaluiert. Anschließend werden die verwendete Kommunikationsbibliothek Libnodave und ein Abriss über das Android-Framework gegeben. Diese Technologien bilden die Grundlage zur Entwicklung eigener Applikationen zur Interaktion mit der SIMATIC Automatisierungshardware. Mit der Untersuchung des Softwareentwicklungsprozesses und der Funktionsbeschreibung der entwickelten Applikation AndroHmiS7 wird die Anwendung der erarbeiteten Themen gegeben. N2 - In this bachelor thesis the possibilities of a remote access to the process data of a Siemens SIMATIC programmable logic control (PLC) are examined. The main emphasis is on the interaction with process data over a mobile Android device under the use of the WLAN interface. The practical part of the thesis is therefore the development of an Android application for creating, editing and executing a graphical surface. This surface represents process data descriptive via display elements and makes an interaction with the user possible over the screen of the mobile device via operating elements. To this, the thesis initially goes into the basic structures of a SIMATIC automation system with regard to hardware and software items as well as to existing remote access options. These are compared to each other and advantages and disadvantages are evaluated with the App-solution. The used communication library Libnodave and a survey about the Android framework are given. These technologies form the basis for the development of individual applications for the interaction with SIMATIC automation hardware. With the examination of the software development process and the functional description of the developed application AndroHmiS7 an implementation of the topics worked out in this thesis is explained. T2 - Application development on the mobile Android System for interaction with process data on a Siemens Simatic PLC KW - Android KW - SIMATIC KW - S7-300 KW - WinAC KW - SPS KW - PLC KW - Libnodave KW - Mini-HMI KW - Prodave KW - Siemens KW - AndroHmiS7 KW - FHD Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-8282 CY - Düsseldorf ER -