TY - GEN A1 - Bleck, Christian A1 - Cosanne, Elke A1 - Manhart, Lisa A1 - Mimus, Katrin A1 - Rengers-Patz, Vanessa A1 - Schindler, Andreas T1 - Vernetzung in der und für die Altenhilfe: Ein Bündnis für gutes, selbstbestimmtes Altern T2 - FORUM sozialarbeit + gesundheit KW - FBSK_Webseite KW - Altenarbeit KW - Altenhilfe KW - Vernetzung Y1 - 2026 U6 - https://doi.org/10.5555/fdvsg-2026-01-02 SN - 1861-2458 VL - 31 IS - 1 SP - 11 EP - 15 PB - Deutsche Vereinigung für Soziale Arbeit im Gesundheitswesen ER - TY - CHAP A1 - Siekmann, Leonard A1 - Steed, Clint Alex A1 - Mangaroo-Pillay, Mia A1 - Niemann, Jörg A1 - Fussenecker, Claudia T1 - Identifying the Industry 4.0 Skills Gap: A Comparative Analysis of Vocational Training in South Africa and Germany T2 - Advancing Learning Factories: Enabling Future-Ready Skills. Proceedings of the 15th Conference on Learning Factories 2025, Volume 1 KW - Industrie 4.0 KW - Berufliche Qualifikation KW - Deutschland KW - Südafrika Y1 - 2025 SN - 9783031988790 U6 - https://doi.org/10.1007/978-3-031-98880-6_26 SN - 2367-3370 VL - Lecture Notes in Networks and Systems, Bd. 1545 SP - 212 EP - 222 PB - Springer Nature CY - Cham ER - TY - JOUR A1 - Sulaiman, Mohammed A. A1 - Saber, Hindren Ali A1 - Hasan, Hasan F. A1 - Benim, Ali Cemal T1 - Latent heat cold storage integrated direct evaporative cooler: A neoteric practical design for energy and water saving potential with thermal comfort improvement JF - Journal of Energy Storage KW - Latentwärmespeicher KW - Verdunstungskühlung KW - Energieeinsparung KW - Wassereinsparung Y1 - 2026 U6 - https://doi.org/10.1016/j.est.2025.119612 SN - 2352-152X VL - 143 PB - Elsevier ER - TY - JOUR A1 - de Haas, Hella A1 - Marcinkowski, Frank A1 - Kohler, Sarah T1 - Rethinking Rationality: Scientists’ Perspectives on Health Communication After the COVID-19 Pandemic JF - Health Communication KW - COVID-19-Pandemie KW - Wissenschaftskommunikation KW - Gesundheitskommunikation Y1 - 2026 U6 - https://doi.org/10.1080/10410236.2026.2620496 SN - 1041-0236 PB - Informa ER - TY - CHAP A1 - Jahr, Andreas A1 - Sim, H. A1 - Batos, Andrej A1 - Molla, G. A1 - Berk, V. A1 - Villena Martínez, J. D. T1 - A novel method to examine the abrasive and impact stress behavior of agricultural blades T2 - VII Congreso Ibérico de Agroingeniería y Ciencias Hortícolas: innovar y producir para el futuro. Libro de actas N2 - Cutting of stalk material is a core process within the whole harvesting period. During the entire harvesting, every stalk is cut at least one time. For other agricultural processes, such as grain crop harvesting or mulching of brownfields, cutting processes belong also to the main techniques. They have a significant influence on the efficiency and profitability of agricultural machines. Minimizing wear has a high level of importance regarding an environmental friendly and resource efficient agriculture. Wear during agricultural cutting processes is mainly caused due to abrasion and impact stress. Blunt and deformed blades affect the energy efficiency and the cutting quality. The increase of fuel consumption and frequent machine breakdowns with an involvement of high labor and material costs generate considerable economic losses. A consequent, methodical optimization of the wear behavior of the blades can offer a high saving potential of ecological and economic resources. The blade geometry, base material and heat respectively surface treatment substantially determine the wear resistance. Under technological and economic considerations these parameters have to be optimized. Therefore, a test method has been developed at the FMDauto in cooperation with the Ennepetaler Schneid- und Mähtechnik (ESM) GmbH & Co KG. The test bench enables to test different blades of agricultural machines under standardized and repeatable conditions. This paper presents the test bench and the results of several wear tests. The examinations of the abrasive wear and the impact stress on cutter blades are shown. Algorithms developed at FMDauto are used to analyze the results. It is carried out that further developments of the analyzing methods to describe the sharpness and disruptions of cutter blades are reasonable. Y1 - 2014 SN - 978-84-695-9055-3 SP - 854 EP - 859 ER - TY - GEN T1 - 1043 - Satzung der Ethikkommission der Hochschule Düsseldorf für zivile und nicht-invasive Forschung vom 29.01.2026 N2 - Aufgrund der §§ 2 Abs. 4 S. 1, 22 Abs. 1 S. 1 Nr. 3, 4 Abs. 4 S. 3 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz – HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung hat die Hochschule Düsseldorf die folgende Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 1043 KW - Amtliche Mitteilungen Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-60216 CY - Düsseldorf ER - TY - THES A1 - Krahmer, Utz T1 - Umfang und Funktion der politischen Beteiligung an der städtebaulichen Planung und im Sozialplanverfahren nach dem Städtebauförderungsgesetz und dem neuen Bundesbaugesetz Y1 - 1977 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-60208 PB - Johann Wolfgang Goethe-Universität CY - Frankfurt am Main ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej T1 - Kinematic Simulation of a loaded Truck Skip Loader – Kinematic and Kinetic Analysis of Mechanisms T2 - Seminar: Simulation Driven Design : potential and challenges ; 12th - 13th March 2008, Wiesbaden Y1 - 2008 SN - 9781874376347 SP - 1 EP - 13 ER - TY - JOUR A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Happel, Holger A1 - Corves, Burkhard T1 - Mehrkörpersimulation eines Schnittprozesses JF - LANDTECHNIK N2 - Es wird gezeigt, wie ein Schnittprozess aus dem Bereich der Erntetechnik mit dem Mehrkörpersimulationsprogramm SimMechanics simuliert werden kann. Ziel ist es, im Rahmen des Forschungsvorhabens eine Grundlage zu schaffen für die virtuelle Bestimmung der erforderlichen Antriebsleistung und Optimierung von Mähdrescherhäckslern hinsichtlich einer nachhaltigen und Ressourcen schonenden Leistungssteigerung. KW - Erntetechnik KW - Schnittprozess KW - Simulation KW - Harvest technology KW - cutting process Y1 - 2008 U6 - https://doi.org/10.15150/LT.2008.822 VL - 63 IS - 4 SP - 218 EP - 220 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e.V. ER - TY - GEN ED - Grass, Brigitte T1 - Internationalisierungsstrategie Hochschule Düsseldorf T2 - Internationalizationstrategy Hochschule Düsseldorf N2 - Mit der Internationalisierungsstrategie der HSD wird die im Hochschulentwicklungsplan 2012 – 2016 verankerte strategische Leitlinie der „Internationalisierung“ vertieft und weiterentwickelt. Nach einem hochschulinternen Konsultations- und Beteiligungsprozess hat das Präsidium im November 2015 die Kurzfassung der umfangreichen Internationalisierungsstrategie beschlossen. Die ausführlichen und detaillierten Ergebnisse der zuvor durchgeführten Bestimmung des Status quo sowie die Ergebnisse der Stärken- und Schwächenanalyse werden als hochschulinterner Prozess hier nicht abgebildet. Die vorliegende Kurzfassung fokussiert die nach dem Gegenstromprinzip hervorgebrachten, wesentlichen Resultate zur Internationalisierung. N2 - The Internationalization Strategy of Hochschule Düsseldorf - University of Applied Sciences (HSD) consolidates and develops further the strategic principle of “Internationalization” anchored in the 2012-2016 University Development Plan. Following an internal participatory process of consultation, in November 2015 the University’s Executive Board approved the abridged version of HSD’s extensive Internationalization Strategy. The comprehensive and detailed results gained beforehand when determining the University’s status quo and the outcome of a strengths and weaknesses analysis are not presented here. This abridged version concentrates on the key results with regard to internationalization, which were generated in the framework of a top-down and bottom-up approach. KW - Internationalisierung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-60105 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - JOUR A1 - Mandal, Dipak Kumar A1 - Manna, Nirmal K. A1 - Biswas, Nirmalendu A1 - Rudra, Tansu A1 - Kumar, Rajesh A1 - Benim, Ali Cemal T1 - Enhanced heat transport in magneto-nanofluidic thermal systems: adiabatic block effects in grooved channels and ANN modeling JF - International Journal of Thermofluids N2 - This study investigates heat transfer enhancement in magneto-nanofluidic systems through the strategic placement of adiabatic blocks in grooved channels. Using CuO–H2O nanofluid in a bottom-heated channel with circular expansion, we examine the complex interactions between forced convection, magnetic fields, and uoyancy effects. Through systematic numerical analysis, we explore the combined influences of Rayleigh, Reynolds, and Hartmann numbers on thermal performance. Our findings reveal significant heat transfer enhancement (up to 137 %) under optimal conditions, particularly with vertical magnetic field orientation at Re = 100 and Ha = 30. The results demonstrate how adiabatic blocks modify flow structures, with larger blocks diminishing vortex intensity while elevated Ra generates secondary vortices that interact with primary circulations. Magnetic field effects show notable dependence on orientation, with vertical fields generally promoting better heat transfer than horizontal configurations. To complement the numerical analysis, we develop a predictive model using Artificial Neural Network (ANN) for Nusselt numbers across various operating conditions, achieving over 99 % accuracy. The integrated computational-ANN approach offers significant advancements in optimizing thermal systems in various areas, ranging from electronics cooling to microfluidic devices. KW - Mixed convective flow KW - Nanofluids KW - Heat transfer augmentation KW - Adiabatic block KW - Grooved channel KW - Neural network KW - HSD Publikationsfonds Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-60127 SN - 2666-2027 VL - 31 PB - Elsevier ER - TY - CHAP A1 - Hüsen, Jonsa A1 - von Berg, Markus A1 - Steffens, Jochen T1 - Evaluating the Effectiveness of Virtual Listening Tests for Balanced Armature Headphone Drivers T2 - AES International Conference on Headphone Technology 2025 August 27–29, Espoo, Finland Y1 - 2025 UR - https://aes.org/publications/elibrary-page/?id=22929 IS - 3 PB - Audio Engineering Society ER - TY - CHAP A1 - Triebus, Charlotte A1 - Druzetic-Vogel, Ivana A1 - Geiger, Christian T1 - Precious Camouflage - Artistic Research for the Creation of a Dance Piece with Humans and AI T2 - Proceedings of the Conference on Animation and Interactive Art Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-60099 SN - 979-8-4007-1532-7 SP - 188 EP - 198 PB - ACM CY - New York, NY, USA ER - TY - CHAP A1 - Geiger, Christian A1 - Ali, Soren A1 - Dilchert, Philipp ED - Olivero, Lucas Fabian ED - Stark, Maja ED - Schürrer, Dagmar ED - Israel, Johann Habakuk T1 - The BildKlangPoet - a Framework for Designing Mixed Reality Painting Experiences Using Generative AI T2 - Proceedings of the 22nd International Conference on Culture and Computer Science: Remixing Analog and Digital (KUI ’25), September 25, 26, 2025, Berlin, Germany KW - MIREVI KW - Applied Computing KW - Arts and Humanities KW - Media Arts Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-60086 SN - 979-8-4007-1478-8/2025/09 SP - 1 EP - 4 PB - ACM CY - New York, NY, USA ER - TY - CHAP A1 - Jahr, Andreas A1 - Corves, B. A1 - Batos, Andrej A1 - Wenzel, O. T1 - Abbildung und Analyse von Schnittprozessen mit Hilfe der Mehrkörper- und Strömungssimulation – Modellierung eines Mehrkörper-Teilungsprozesses und Ermittlung der erforderlichen Antriebsleistung eines Häckslers T2 - Landtechnik regional und international: Land-Technik 2008, Tagung Stuttgart-Hohenheim, 25. und 26. September 2008 KW - Landtechnik Y1 - 2008 SN - 9783180920450 VL - VDI-Berichte ; 2045 SP - 247 EP - 255 PB - VDI-Verl. CY - Düsseldorf ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej ED - Corves, Burkhard T1 - Mehrkörpermechanik-Anwendungen in der Landtechnik T2 - 8. Kolloquium Getriebetechnik Aachen 2009 Y1 - 2009 SN - 978-3-86130-984-0 SP - 287 EP - 296 PB - Mainz CY - Aachen ER - TY - JOUR A1 - Jahr, Andreas A1 - Corves, Burkhard A1 - Batos, Andrej A1 - Schumacher, Mathias T1 - Simulation landtechnischer Schnitt- und Strömungsprozesse JF - agricultural engineering.eu N2 - Der Einsatz moderner Simulationsverfahren beschränkt sich im Bereich der Landmaschinenentwicklung in der Regel auf Anwendungen, die aus der Automobiltechnik bekannt sind. Darüber hinaus könnten diese Verfahren auch im Rahmen der Auslegung von Erntemaschinen hinsichtlich des Ernteprozesses einen maßgeblichen Beitrag zur weiteren Ressourcenschonung und Energieverbrauchsminderung leisten. Im Folgenden wird ein Ansatz zur Simulation erntetechnischer Schnittprozesse mit Hilfe der Mehrkörpersimulation (MKS) vorgestellt. Ferner soll die Anwendung der Strömungssimulation (CFD) am Beispiel eines Schlegelhäckslers gezeigt werden. KW - Strömungssimulation (CFD) KW - Mehrkörpersimulation (MKS) KW - Mähdrescherhäcksler KW - Schnittprozess Y1 - 2010 U6 - https://doi.org/10.15150/lt.2010.518 SN - 2943-5641 N1 - Diese Veröffentlichung beruht auf den Ergebnissen eines ProInno II-Projektes [1], das vom BMWi gefördert wurde und in Zusammenarbeit mit der Ennepetaler Schneid- und Mähtechnik GmbH & Co. KG (www.esm-ept.de) entstand VL - 65 IS - 5 SP - 372 EP - 375 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e. V. (KTBL) ER - TY - BOOK A1 - Bongartz, R. A1 - Trofimov, Igor A1 - Jahr, Andreas ED - Pohl, Michael T1 - Optimierung der Zeitfestigkeit geschweißter rotationssymmetrischer Bauteile durch Randschichtverfestigung der Schweißzone T3 - Konstruktion, Werkstoffentwicklung und Schadensanalyse : [Tagung Werkstoffprüfung 2010, 02. und 03. Dezember 2010 in Neu-Ulm] KW - Werkstoffprüfung Y1 - 2010 SN - 9783514007789 SP - 131 EP - 136 PB - Verlag Stahleisen CY - Düsseldorf ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Sim, Hunn A1 - Villena Martínez, Jose David T1 - A New Approach for Measuring the Wear Resistance of Cutter Blades T2 - International Conference of Agricultural Engineering – CIGR-AgEng2012, Valencia/Spanien, 8.-12.07.2012 Y1 - 2012 ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Pillmann, A. A1 - Hoppe, S. A1 - Diett, D. T1 - Determining the Cutting Properties of Agricultural Products T2 - International Conference of Agricultural Engineering – CIGR-AgEng2012, Valencia/Spanien, 8.-12.07.2012 Y1 - 2012 ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Jahr, Stefan A1 - Corves, Burkhard T1 - Entwicklung einer Zykloidenverzahnung für hohe Übersetzungen für die Elektromobilität - Zweistufiges Planetengetriebe mit epizykloidaler Zahnform T2 - Bewegungstechnik 2012 : Koppelgetriebe, Kurvengetriebe und gesteuerte Antriebe im Maschinen-, Fahrzeug-, und Gerätebau ; Nürtingen, 11. und 12. September 2012 / VDI Produkt- und Prozessgestaltung Y1 - 2012 SN - 978-3-18-092175-4 VL - VDI-Berichte ; 2175 SP - 69 EP - 80 PB - VDI Verl. CY - Düsseldorf ER - TY - CHAP A1 - Jahr, Andreas A1 - Batos, Andrej A1 - Sim, Hunn A1 - Villena Martínez, Jose David A1 - Zepke, S. T1 - Eine neuartige Methode zur Bestimmung der Verschleissfestigkeit von Hackslermessern T2 - Mit Erfahrung und Innovationskraft zu mehr Effizienz: Land.Technik 2012, Conference: Agricultural Engineering, Karlsruhe 6. und 7. November 2012 Y1 - 2012 SN - 9783180921730 SN - 0083-5560 VL - 2173 SP - 263 EP - 270 PB - VDI-Verlag CY - Düsseldorf ER - TY - CHAP A1 - Kiel, Jürgen A1 - Jahr, Andreas A1 - Becker, Sebastian A1 - Ingenlath, Philipp A1 - Quarz, Dieter A1 - Gaida, Philipp A1 - Villena Martínez, Jose David ED - Bertram, Torsten ED - Corves, Burkhard ED - Janschek, Klaus T1 - Entwicklung eines aktiven, individualisierten elektromotorischen Kraft-/ Cardio Trainingsgerätes T2 - Fachtagung Mechatronik 2013 : Aachen, (06.03. - 08.03.2013) KW - Industrieroboter KW - Simulation KW - Regelungstechnik KW - Sensortechnik KW - Handhabungstechnik KW - Elektromechanisches Gerät KW - Kraftfahrzeugtechnik KW - Modellierung KW - Mechatronik KW - Aktorik Y1 - 2013 SN - 3-86130-958-0 SP - 289 EP - 292 PB - Aachen ER - TY - CHAP A1 - Gaida, Philipp A1 - Jahr, Andreas A1 - Weinberg, Kerstin ED - Dłużewsk, Paweł ED - Jurczak, Grzegorz ED - Young, Toby D. T1 - FEA and experimental validation of an electroactive polymer actuator [Abstract] T2 - Third International Conference on Material Modelling incorporating the Thirteenth European Mechanics of Materials Conference, September 8–11, 2013,Warsaw, Poland Y1 - 2013 SN - 978-83-89687-83-8 IS - 185 PB - Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk CY - Warszawa ER - TY - CHAP A1 - Gaida, Philipp A1 - Jahr, Andreas A1 - Weinberg, Kerstin T1 - Preliminary survey of a diaphragm EAP stack for the use as an actuator in a water valve T2 - 14th International Workshop on Research and Education in Mechatronics 6th-7th June 2013 Y1 - 2013 ER - TY - CHAP A1 - Batos, Andrej A1 - Röger, T. A1 - Diett, D. A1 - Jahr, Andreas A1 - Corves, Burkhard T1 - Ein Beitrag zur Simulation landtechnischer Aggregate T2 - Land.Technik 2014 : Agrartechnik im Dialog mit Politik und Gesellschaft ; Berlin 19. und 20. November 2014 ; [Fachbeiträge der 72. Internationalen Tagung Land.Technik des Fachbereichs Max-Eyth-Gesellschaft Agrartechnik im VDI]= Conference: Agricultural Engineering 2014 / VDI-MEG Y1 - 2014 SN - 978-3-18-092226-3 VL - VDI-Berichte ; 2226 SP - 53 EP - 58 PB - VDI-Verl. CY - Düsseldorf ER - TY - THES A1 - Pesch, Magdalena T1 - Entwicklungspotenziale der Marte Meo-Practitioner-Ausbildung. Ein ‚goldenes Geschenk‘ für Fachkräfte T3 - Hervorragende Abschlussarbeiten im Fachbereich Sozial- und Kulturwissenschaften - 219 KW - Practitioner KW - Videoberatung KW - Marte Meo Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59895 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - GEN T1 - 1042 - Zweite Satzung zur Änderung der Fachbereichsordnung für den Fachbereich Medien der Hochschule Düsseldorf vom 13.01.2026 N2 - Aufgrund der §§ 2 Abs. 4 S. 1, 26 Abs. 3 S. 2 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung und der Grundordnung der Hochschule Düsseldorf vom 08.10.2015 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 414) in der aktuell gültigen Fassung hat der Fachbe-reich Medien der Hochschule Düsseldorf die folgende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 1042 KW - Amtliche Mitteilungen Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59948 CY - Düsseldorf ER - TY - CHAP A1 - Fendrich, Sandra A1 - Fendrich, Sandra A1 - Jordan, Erwin A1 - Maykus, Stephan A1 - Müller, Regine A1 - Pothmann, Jens T1 - Diskussionspapier „Hilfen zur Erziehung in Nordrhein-Westfalen“ BT - ISA-Jahrbuch zur Sozialen Arbeit 2010 Y1 - 2010 SN - 978-3-8309-2442-5 SP - 126 EP - 150 PB - Waxmann CY - Münster ER - TY - CHAP A1 - Müller, Regine ED - Institut für Soziale Arbeit e.V., T1 - Standards in der Praxis der Risikoeinschätzungsinstrumente BT - Jahrbuch zur sozialen Arbeit 2009 Y1 - 2009 SP - 71 EP - 85 PB - Waxmann ER - TY - RPRT A1 - Müller, Regine A1 - Knirsch, Thomas T1 - Ein Marshallplan für Afrika BT - Länderbericht der Konrad-Adenauer-Stiftung, Südafrika Y1 - 2002 ER - TY - GEN A1 - Müller, Regine T1 - Netzwerke Frühe Hilfen: Chancen einer gesamtkommunalen Kinder- und Jugendhilfestrategie T2 - Jugendhilfe-Report: Informationen aus dem Landesjugendamt Rheinland KW - Kinderschutz KW - Prävention KW - Landschaftsverband Rheinland Y1 - 2014 UR - https://web.archive.org/web/20250327071616/https://www.lvr.de/media/wwwlvrde/jugend/service/publikationen/dokumente_97/14_1732_JHR_02-2014.pdf SP - 33 EP - 36 PB - LVR-Landesjugendamt Rheinland ER - TY - JOUR A1 - Müller, Regine T1 - Frühe Hilfen – der Jugendhilfeausschuss als Steuerungsinstanz JF - Jugendhilfe-Report Y1 - 2014 SP - 15 EP - 18 PB - Landschaftsverb. Rheinland, Landesjugendamt ER - TY - CHAP A1 - Müller, Regine ED - Landschaftsverband Rheinland, T1 - Frühe Hilfen – Vernetzte Hilfen für psychisch erkrankte Eltern und deren Kinder T2 - KipE Rheinland, Hilfen für Kinder psychisch kranker Eltern in neun Modellregionen im Rheinland Y1 - 2015 SP - 71 EP - 72 PB - Eigenverlag ER - TY - CHAP A1 - Müller, Regine ED - Institut für soziale Arbeit, T1 - Kinderrechte und kindzentrierte Ansätze im Kinderschutz - ein europäischer Vergleich T2 - Jahrbuch zur Sozialen Arbeit 2017, Schwerpunkt: Das Kind im Mittelpunkt Y1 - 2017 SN - 9783830987529 SP - 51 EP - 68 PB - Waxmann CY - Münster, New York ER - TY - CHAP A1 - Müller, Regine ED - Hobelsberger, Hans T1 - Professionalisation and academisation of social work in the process of transformation: Opening Remarks T2 - Social glocalisation and education. social work, health sciences and practical theology perspectives on change Y1 - 2020 SN - 978-3-8474-1512-1 SP - 267 EP - 269 PB - Verlag Barbara Budrich CY - Leverkusen ER - TY - CHAP A1 - Müller, Regine ED - Hobelsberger, Hans T1 - Negotiating with social problems. Professionalism in combatting child poverty in Germany T2 - Social glocalisation and education. social work, health sciences and practical theology perspectives on change Y1 - 2020 SN - 978-3-8474-1512-1 SP - 279 EP - 286 PB - Verlag Barbara Budrich CY - Leverkusen ER - TY - CHAP A1 - Müller, Regine ED - Wernberger, Angela T1 - Subjektfiguren als Element praxeologischer Professionalität – Zur Rekonstruktion von Passungs- und Aneignungsverhältnissen in der Sozialen Arbeit T2 - Professionalitätsforschung in der Sozialen Arbeit. Praxeologisch-rekonstruktive Perspektiven Y1 - 2022 SN - 978-3-8474-1670-8 VL - Verlag Barbara Budrich SP - 151 EP - 169 PB - Opladen, Berlin, Toronto ER - TY - BOOK A1 - Müller, Regine T1 - Professionalität im Wohlfahrtsstaat. Praxeologische Perspektiven auf den Umgang mit Kinderarmut in der Sozialen Arbeit Y1 - 2023 SN - 978-3-7799-7669-1 PB - Beltz Juventa CY - Weinheim ER - TY - CHAP A1 - Müller, Regine ED - Institut für soziale Arbeit, T1 - Grenzen und Möglichkeiten von Professionalitätsforschung im Kontext von Praxisforschung und Praxisberatung T2 - ISA-Jahrbuch zur Sozialen Arbeit 2023: Soziale Arbeit und Forschung: Methoden, Themenfelder, Reflexionen Y1 - 2023 SN - 978-3-8309-4847-6 U6 - https://doi.org/10.31244/9783830998471 SP - 136 EP - 150 PB - Waxmann CY - Münster, New York ER - TY - CHAP A1 - Müller, Regine ED - Rieger, Jens ED - Sen, Katrin ED - Staats, Martin ED - Stocker, Stephanie ED - Wassermann, Dirk ED - Zimmermann, Okka ED - Burschel, Maria T1 - Bildung für nachhaltige Entwicklung in der disziplinären Theoriebildung der Sozialen Arbeit T2 - Handbuch Nachhaltigkeit und Soziale Arbeit Y1 - 2024 SN - 9783779978770 SP - 216 EP - 229 PB - Beltz Juventa CY - Weinheim, Basel ER - TY - CHAP A1 - Althoff, Monika A1 - Müller, Regine ED - Franz, Julia ED - Spatschek, Christian ED - van Rießen, Anne T1 - Rückzug aus dem Feld – Sozialtheoretische Perspektiven auf ein prekär-professionelles Selbstverständnis in der Sozialen Arbeit T2 - Fachkräftemangel und De-professionalisierung in der Sozialen Arbeit – Analysen und Bestandsaufnahmen Y1 - 2024 SN - 978-3-8474-1994-5 U6 - https://doi.org/10.3224/84743060 SP - 107 EP - 118 PB - Barbara Budrich CY - Opladen, Toronto ER - TY - CHAP A1 - Langer, Andreas A1 - Lehmann, Denise A1 - Müller, Regine A1 - Sander, Tobias ED - Langer, Andreas ED - Lehmann, Denise ED - Müller, Regine ED - Sander, Tobias T1 - Einleitung T2 - Professionalität(en) und Professionalisierung in der Sozialen Arbeit. Theoretische Grundlagen und organisationale Steuerung KW - FBSK_Webseite Y1 - 2025 SN - 9783779986676 SP - 8 EP - 15 PB - Beltz Juventa CY - Weinheim ER - TY - CHAP A1 - Müller, Regine ED - Langer, Andreas ED - Lehmann, Denise ED - Müller, Regine ED - Sander, Tobias T1 - Wohlfahrtsstaatliche Professionalität T2 - Professionalität(en) und Professionalisierung in der Sozialen Arbeit. Theoretische Grundlagen und organisationale Steuerung KW - FBSK_Webseite Y1 - 2025 SN - 9783779986676 SP - 67 EP - 78 PB - Beltz Juventa CY - Weinheim ER - TY - CHAP ED - Langer, Andreas ED - Lehmann, Denise ED - Müller, Regine ED - Sander, Tobias T1 - Professionalität(en) und Professionalisierung in der Sozialen Arbeit. Theoretische Grundlagen und organisationale Steuerung KW - FBSK_Webseite Y1 - 2025 SN - 9783779986676 PB - Beltz Juventa CY - Weinheim ER - TY - CHAP A1 - Müller, Regine A1 - Althoff, Monika ED - Langer, Andreas ED - Lehmann, Denise ED - Müller, Regine ED - Sander, Tobias T1 - Zum Stand des Rückzugs der Fachkräfte aus dem Feld der Sozialen Arbeit T2 - Professionalität(en) und Professionalisierung in der Sozialen Arbeit. Theoretische Grundlagen und organisationale Steuerung KW - FBSK_Webseite Y1 - 2025 SN - 9783779986676 SP - 79 EP - 89 PB - Beltz Juventa CY - Weinheim ER - TY - CHAP A1 - Müller, Regine T1 - Die dokumentarische Interpretation von Professionalität – Überlegungen zu Erweiterungen und Eingrenzungen der Typenbildung der Dokumentarischen Methode [im Erscheinen] T2 - Jahrbuch Dokumentarische Methode KW - FBSK_Webseite Y1 - 2025 ER - TY - THES A1 - Gotzen, Antonia T1 - Handlungsmöglichkeiten Sozialer Arbeit als Reaktion auf antifeministische Weiblichkeitskonstruktionen in den sozialen Medien – Eine Analyse antifeministischer Narrative am Beispiel der Offenen Kinder- und Jugendarbeit KW - SoSe25 Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59882 PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - CHAP A1 - Batos, Andrej A1 - Jahr, Andreas A1 - Corves, B. T1 - Experimental Investigations for the Characterization of Cutting Processes on Biomaterials [Oralposter] T2 - European Symposium and Exhibition on Biomaterials and Related Areas – Euro BioMAT 2015 Y1 - 2015 ER - TY - JOUR A1 - Batos, Andrej A1 - Ruepp, Maximilian A1 - Jahr, Andreas A1 - Corves, Burkhard T1 - Ermittlung der Biege- und Schnitteigenschaften von Halmgut mit einem Universalprüfstand JF - LANDTECHNIK KW - auto KW - Universalprüfstand KW - Messung KW - Biegeeigenschaften KW - Schnitteigenschaften KW - Halm Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59856 SP - 84 EP - 96 PB - Kuratorium für Technik und Bauwesen in der Landwirtschaft e.V. ER - TY - CHAP A1 - Jahr, Andreas A1 - Bongartz, Robert A1 - Sim, Hunn A1 - Pillmann, Alex T1 - A Novel Test Method to Determine the Wear Resistance of Agricultural Cutting Tools with an Analyzing Method Based on an Ellipse-Fit Algorithm T2 - Conference Papers in Science N2 - Cutting belongs to the essential techniques in many fields of application in agricultural engineering. Cutting tools in agricultureare exposed to a high amount of abrasive wear and impact stress. Increasing the wear resistance of cuttings tools has a highsignificance for the efficiency and profitability of agricultural machinery. Blunt and deformed blades decrease the energy efficiencyand the cutting quality. Blade failures cause machine breakdowns and increase labor and material costs. To enable a consistent andsystematic optimization of the blades, a suitable testing method is necessary. Conventional field tests do not provide comparableand repeatable results. Therefore, a test method developed at the FMDauto in cooperation with the Ennepetaler Schneid- undM¨ahtechnik (ESM) GmbH & Co. KG is presented. The test bench provides standardized and repeatable conditions with a similarwear pattern which is found during field operations. One of the remaining challenges is a clear wear characterization. Existinganalyzing methods do not consider the energy efficiency and do not determine the edge holding property clearly. In this paper, anew analyzing method based on an ellipse-fit method is introduced to rate the geometrical shape of the cutting edge and examinethe wear resistance of different blade Y1 - 2015 U6 - https://doi.org/10.1155/2015/548238 SN - 2356-6108 N1 - This Conference Paper is based on a presentation given by Hunn Sim at “European Symposium on Friction, Wear, and WearProtection” held from 6 May 2014 to 8 May 2014 in Karlsruhe, Germany VL - 2015 SP - 1 EP - 6 PB - Wiley ER - TY - CHAP A1 - Batos, Andrej A1 - Beckers, S. A1 - Grüner, S. A1 - Kiel, J. A1 - Jahr, A. A1 - Schniederbruns, B. A1 - Berghaus, A. A1 - Weiß, P. ED - Wissensforum GmbH, VDI T1 - Möglichkeiten und Grenzen eines in einem Feldhäcksler verbauten, elektrisch angetriebenen Wurfbeschleunigers T2 - LAND.TECHNIK 2016: Das Forum für agrartechnische Innovationen Y1 - 2016 SN - 978-3-18-102273-3 U6 - https://doi.org/10.51202/9783181022733-325 VL - VDI-Berichte, 2273 SP - 325 EP - 332 PB - VDI Verlag CY - Düsseldorf ER - TY - BOOK A1 - Jahr, Andreas A1 - Berger, Joachim T1 - Klausurentrainer Technische Mechanik: Aufgaben und ausführliche Lösungen zu Statik, Festigkeitslehre und Dynamik Y1 - 2017 SN - 978-3-658-14782-2 U6 - https://doi.org/10.1007/978-3-658-14783-9 PB - Springer Nature CY - Wiesbaden ET - 4. Auflage ER - TY - THES A1 - Batos, Andrej T1 - Domänenübergreifende Mehrkörpersimulation bei Teilungsprozessen pflanzlicher Erntegüter: = Cross-domain multi-body simulation of plant separation processes Y1 - 2016 SN - 978-3-95886-128-2 N1 - RWTH Aachen University, Dissertation, 2016 PB - Verlagshaus Mainz CY - Aachen ER - TY - CHAP A1 - Fomin, A.S. A1 - Kiselev, S.V. A1 - Jahr, Andreas A1 - Sim, H. T1 - Development of the Kinematic Model of Horizontal-Set Drive for Blades of Combine Harvester Thresher T2 - Materialien zum wissenschaftlichen Seminar der Stipendiaten der Programme «Michail Lomonosov» und «Immanuel Kant» 2015/2016 Y1 - 2017 IS - 12 SP - 188 EP - 196 ER - TY - JOUR A1 - Carsten, Stöhr A1 - Monika, Janssen A1 - Jörg, Niemann A1 - Benedikt, Reich T1 - Smart Services JF - Procedia - Social and Behavioral Sciences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59819 SN - 1877-0428 VL - 238 SP - 192 EP - 198 PB - Elsevier ET - SIM 2017 / 14th International Symposium in Managemen ER - TY - CHAP A1 - Dehmer, Joanna A1 - Niemann, Jörg T1 - Platform-based value chain management T2 - The 6th International Conference on Manufacturing Engineering and Process (ICMEP 2017), May 27th-29th 2017, Lisboa, Portugal N2 - The transformation of traditional value chain processes towards a digital value chain management enables companies to sustainably establish and retain a competitive market position. Digitisation offers the opportunity to design and operate expansive process chains with efficient process operations via co-operative platforms. Increased customer loyalty („lock-in“) via integrated measures at the front-end raises utilization and planning certainty for the technological recovery system Y1 - 2017 UR - https://www.researchgate.net/publication/318858832_Plattform-based_value_chain_management ER - TY - CHAP A1 - Niemann, Jörg A1 - Dehmer, J. A1 - Batos, Andrej A1 - Kiel, Jürgen A1 - Seifert, S. T1 - The impact of electrification to the total cost of ownership of mobile production machines on the example of a forage harvester T2 - 25th Southern African Universities Power Engineering Conference (SAUPEC 2017), 30.01.-01.02.2017 KW - Life cycle costing KW - Total cost of ownership KW - Sensitivity Analysis KW - Energy Efficiency KW - Energy Management KW - Electrification Y1 - 2017 UR - https://www.researchgate.net/publication/318858764_The_impact_of_electrification_to_the_total_cost_of_ownership_of_mobile_production_machines_on_the_example_of_a_forage_harvester ER - TY - CHAP A1 - Barbashov, Maksim A1 - Batos, Andrej A1 - Jahr, Andreas ED - Holzhauer, Ralf T1 - Experimentelle und theoretische Grundlagenuntersuchung landtechnischer Schnittprozesse bei verschiedenen Schnittgeschwindigkeiten T2 - Ressourcen-Wissen : Hebung ungenutzter Potenziale : Tagungsband Vortragsveranstaltung der Fachgruppe Ressourcen des Graduierteninstitutes NRW, 16. März 2017, Hochschule Bochum Y1 - 2017 SN - 978-3-9819028-0-8 SP - 142 EP - 146 PB - Graduierteninstitut NRW CY - Bochum ER - TY - PAT A1 - Jahr, Andreas A1 - Trofimov, Igor T1 - Fördersystem für Schüttgüter N2 - Die Erfindung betrifft ein Verfahren und eine Vorrichtung zur Ermittlung der Masse und Fördergeschwindigkeit von Schüttgütern in einem Linearförderer, wobei aus einem Schüttgutbehälter das Schüttgut über eine Mündung auf eine Förderrinne gelangt. Y1 - 2019 ER - TY - CHAP A1 - Batos, Andrej A1 - Hellenbroich, Jean Maurice A1 - Kiel, Jürgen A1 - Jahr, Andreas ED - Bertram, Torsten ED - Corves, Burkhard ED - Janschek, Klaus ED - Rinderknecht, Stephan T1 - Entwicklung einer smarten, elektronisch gesteuerten Dosiereinheit für den gezielten und sparsamen Einsatz von Pflanzenschutzmitteln T2 - Fachtagung VDI MECHATRONIK 2022 N2 - Feldspritzen verfügen über entlang eines Spritzgestänges angebrachte Düsen, die ein Pflanzenschutzmittel-(PSM-)Trägerflüssigkeits-Gemisch verteilen. Da die Düsen nur ein PSM-Gemisch applizieren und häufig nicht einzeln ansteuerbar sind, wird nicht bedarfsgerecht verteilt und u. U. stellenweise zu wenig, zu viel oder nicht das optimale PSM appliziert. Dieser Beitrag stellt das Labormodell einer High-Speed-Dosiereinheit zur Vermischung dreier PSM mit der Trägerflüssigkeit vor, mit der Pflanzen individuell und mit der minimal nötigen PSM-Menge behandelt werden. Sie arbeitet unabhängig vom hydraulischen System der Trägerflüssigkeit, ist reaktionsschnell und überaus dosiergenau. Basierend auf einer Applikationskarte, die den Pflanzenstatus enthält, und der GPS-Position werden Ausbringvolumen, -zeitpunkt, -position und PSM-Art in einem ISOBUS-Terminal bestimmt und an ein Steuergerät weitergegeben, das die Dosiereinheit ansteuert. Neben der neuentwickelten Hardware und Steuerung werden erste Prüfstandergebnisse vorgestellt. N2 - Field sprayers have nozzles mounted along a spray boom that distribute a mixture of a crop protection agent (CPA) and a carrier liquid, usually water. Since the nozzles apply only a single CPA mixture and often cannot be controlled individually, application is not demand-oriented, which can result in locally insufficient, excessive, or non-optimal CPA application. This paper presents a laboratory model of a newly developed high-speed dosing unit for mixing three CPAs with a carrier liquid, enabling individual plant treatment using only the minimally required amount of CPA. The system operates independently of the carrier liquid’s hydraulic system, responds rapidly, and provides extremely accurate dosing. Based on an application map containing crop status and GPS position, the required application volume, timing, position, and CPA type are determined in an ISOBUS terminal and transmitted to a control unit that actuates the dosing unit. In addition to the newly developed hardware and control system, initial test bench results are presented. Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:tuda-tuprints-209637 PB - Universitäts- und Landesbibliothek Darmstadt CY - Darmstadt ER - TY - THES A1 - Trofimov, Igor T1 - Modellgestützte Entwicklung eines Verfahrens zur Volumenstromermittlung an Vibrationsfördersystemen N2 - Das in dieser Arbeit behandelte Thema zur angewandten Forschung wird aus zwei großen Quellen gespeist. Zum einen ist das eine experimentelle Untersuchung des Verhaltens eines realen schwingungsfähigen mechanischen Systems. Das Ziel ist das Erstellen eines plausiblen numerischen Prozess- bzw. System-Modells durch Ermittlung der relevanten Systemeinfluss- und Ausgangsgrößen. Zum anderen sind das die Untersuchungen und die Optimierungsmaßnahmen an diesem Modell, um gewünschte Systemeigenschaften bzw. Funktionalitäten mithilfe eines Optimierungsverfahrens mit anschließender experimenteller Verifikation der Optimierungsergebnisse zu erreichen. Die angestrebten Systemfunktionalitäten lassen sich dabei wie folgt formulieren: Die Messeinrichtung des Reglers eines Linearschwingförderers für Schüttgut soll, mit Hilfe des wiegenden Sensors (Kraftsensor) alleine, bei einem kontinuierlichen Materialfluss den Massenstrom, also sowohl die Masse als auch die Geschwindigkeit des auf dem Förderorgan der Förderanlage bewegenden Gutes, ermitteln. Hierbei wird von einer sensorlosen Erfassung der Geschwindigkeit des Fördergutes gesprochen. Die Idee zur sensorlosen Erfassung der Geschwindigkeit eines konstanten Materialflusses am Linearschwingförderer beruht auf der Auswertung des Zeitsignals des im Systemregler integrierten wiegenden Sensors. Das Zeitsignal im sonst konstanten Signal kommt an dem Sensor aufgrund einer Massendiskontinuität (Massenfehler) zustande, die zu diesem Zweck im homogenen Materialfluss auf dem Förderorgan (Förderrinne) des Förderers absichtlich verursacht wird. Die Erzeugung des Massenfehlers wurden über die Variation des Schwingungsverhaltens der Förderanlage realisiert. Dafür wurden folgende Phänomena in einem mit Vibration belasteten Schüttgut ausgenutzt: Infolge der Veränderung der zugeführten Schwingungsenergie können sich sowohl das Profil des Materialstroms als auch die Dichte (Aggregatzustand1) des zu fördernden Materials verändern. Die Systemantwort auf Variation der Schwingungsenergie in Form des Zeitsignals des wiegenden Sensors wurde mit einem speziellen Auswertungsalgorithmus zur Fördergeschwindigkeit ausgewertet. Die Auswertungsergebnisse fließen neben den Werten der Eingangsparameter des Prozesses in das mathematische Modell ein. Im Folgenden wurde das Modell als ein mehrdimensionales Optimierungsproblem betrachtet und unter Anwendung einer geeigneten Optimierungsmethode zielführend behandelt. Anschließend wurde das ermittelte Optimum messtechnisch validiert. KW - Fördergeschwindigkeit KW - Optimierungsmethode KW - Massenstrom KW - Schüttgut KW - mathematisches Prozessmodell Y1 - 2022 UR - https://publications.rwth-aachen.de/record/849332/files/849332.pdf U6 - https://doi.org/10.18154/RWTH-2022-06734 PB - Rheinisch-Westfälische Technische Hochschule Aachen CY - Aachen ER - TY - JOUR A1 - Shajahan, Mohamed Iqbal A1 - Benim, Ali Cemal T1 - Granular PCM based heat sink for electronics thermal management JF - Applied Thermal Engineering N2 - This study investigates aluminum heat sinks integrated with GR42 phase change material (PCM), aiming to enhance thermal inertia and stabilize device temperatures. This is important, since the increasing miniaturization and performance demands for electronic devices have led in a growing need for advanced thermal management systems capable of handling rapid transient loads. The novelty of the work lies in examining different heat sink layouts that optimize the heat dissipation capabilities of GR42 PCMs while minimizing size and weight for electronic cooling. The experimental testing was conducted using three configurations, namely no fin, circular fin and hexagonal fin, with three input powers (4 W, 8 W, and 12 W). The experimental results show that the hexagonal-fin heat sink, surface area is 25 % more than circular fins, exhibited superior thermal performance without significant variation in input power. Notably, the hexagonal-fin heat sink achieved the desired set point temperature of 55 ◦C in 33 % less time than the circular-fin design and 45 % less time than the heat sink without fins. Furthermore, the peak temperatures increased up to 21 % for circular fins. During the charging cycles, the enhancement ratios vary from 72 % and begin to narrow to 25 % during discharge cycles. The hexagonal-fin configuration also exhibited superior melting dynamics, completing the phase transition 44 % faster at higher input power than the circular fins, and established a thermal deviation of nearly 51 % less than finless heat sinks. These findings underscore the critical role of fin geometry and PCM integration in achieving uniform temperature distribution and improved energy storage efficiency. Overall, the hexagonal-fin heat sink with GR42 PCM shows strong potential as a passive cooling solution for low-power portable electronic devices. KW - Heat sinks KW - Portable electronic cooling KW - Latent heat storage KW - GR42 PCM KW - Hexagonal fin KW - Circular fin KW - HSD Publikationsfonds KW - DFG Publikationskosten Y1 - 2026 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59649 SN - 1359-4311 VL - 286 PB - Elsevier ER - TY - JOUR A1 - Virchow, Fabian T1 - Vaughan, Antonia; Braune, John; Tinsely, Meghan & Mondon, Aurelien (Hrsg.). (2024): The ethics of researching the far right. Critical approaches and reflections. Manchester: Manchester University Press. 401 Seiten. ISBN: 978-1-5261- 7387-4, 100,– GBP JF - ZRex – Zeitschrift für Rechtsextremismusforschung KW - FBSK_Webseite Y1 - 2025 U6 - https://doi.org/10.3224/zrex.v5i2.16 SN - 2701-9624 VL - 5 IS - 2-2025 PB - Barbara Budrich ER - TY - CHAP A1 - Hübenthal, Maksim A1 - Müller, Regine ED - Ritter, Bettina ED - Schoneville, Holger T1 - Hilfe und Kontrolle als Teil einer politisch-wohlfahrtsstaatsbezogenen sozialpädagogischen Armutsforschung [im Erscheinen] T2 - Sozialpädagogische Armutsforschung KW - im Erscheinen Y1 - 2026 PB - Beltz Juventa ER - TY - CHAP A1 - Gräßle, Kathrin A1 - Müller, Regine ED - Thole, Werner ED - Höblich, Davina ED - Ahmed, Sarina T1 - Freie Träger [Im Erscheinen] T2 - Taschenwörterbuch Soziale Arbeit KW - im Erscheinen Y1 - 2026 PB - Julius Klinkhardt CY - Bad Heilbrunn ET - 3. überarbeitete Auflage ER - TY - JOUR A1 - Virchow, Fabian T1 - Ramos, Paola (2024): Defectors. The Rise of the Latino Far Right and What it Means for America. New York: Pantheon Books. 244 Seiten, ISBN: 978-0-593-70136-2, 28,– USD JF - ZRex – Zeitschrift für Rechtsextremismusforschung KW - FBSK_Webseite Y1 - 2025 U6 - https://doi.org/10.3224/zrex.v5i2.14 SN - 2701-9624 VL - 5 IS - 2-2025 SP - 326 EP - 327 PB - Barbara Budrich ER - TY - JOUR A1 - Virchow, Fabian T1 - Von „Einzeltätern“ und einem „Trio“ Der NSU und das Versagen der Gesellschaft JF - Außerschulische Bildung N2 - Rechtsterroristische Gewalt tritt in vielfältigen Formen auf und durchzieht die Geschichte der Bundesrepublik Deutschland seit ihrer Gründung. Die gesellschaftliche und staatliche Aufmerksamkeit und die Bereitschaft zur kritischen und systematischen Aufklärung und Auseinandersetzung sind deutlichen Konjunkturen unterworfen. Vielfach dominierten die Verharmlosung und Unterschätzung der Gefahr, die bis heute fortbesteht – von organisierten Gruppen wie von sogenannten Einzeltätern, die in digitalen Öffentlichkeiten politisch radikalisiert werden. KW - FBSK_Webseite Y1 - 2025 SN - 0176-8212 VL - 57 IS - 2 SP - 12 EP - 18 PB - Arbeitskreis Deutscher Bildungsstätten ER - TY - JOUR A1 - Virchow, Fabian T1 - Die vielen Rechtsaußen Begriffsklärungen von der »extremen Rechten« bis zum »Faschismus« JF - Wissenschaft und Frieden : W & F KW - FBSK_Webseite Y1 - 2025 UR - https://web.archive.org/web/20251222101759/https://wissenschaft-und-frieden.de/artikel/die-vielen-rechtsaussen/ SN - 0947-3971 VL - 53 IS - 4 SP - 6 EP - 10 PB - BdWi-Verl. ER - TY - CHAP A1 - Virchow, Fabian ED - Wagner, Jens-Christian ED - Steinbacher, Sybille T1 - Covid-19 und die Folgen. Drei Formen des Geschichtsrevisionismus im Milieu der Pandemieleugnung T2 - Rechter Geschichtsrevisionismus in Deutschland: Formen, Felder, Ideologie KW - FBSK_Webseite Y1 - 2025 SN - 978-3-8353-5841-6 IS - Bd. 22 PB - Wallstein Verlag CY - Göttingen ER - TY - CHAP A1 - Virchow, Fabian ED - Imbusch, Peter ED - Steg, Joris T1 - Bedrohungen und Gewalt von rechts T2 - Bedrohungsanalysen: Angriffe auf PolitikerInnen, JournalistInnen, Einsatzkräfte und Lehrpersonen als Gefahr für die Demokratie KW - Aggression KW - Racism and Nationalism KW - Research on Racism KW - Anti-Semitism and Extremism KW - Terrorism KW - Terrorism and Political Violence KW - Violence and Crime KW - FBSK_Webseite Y1 - 2025 SN - 9783658481513 U6 - https://doi.org/10.1007/978-3-658-48152-0_18 SN - 2627-2016 SP - 361 EP - 371 PB - Springer Nature CY - Wiesbaden ER - TY - JOUR A1 - Thomas, Tanja A1 - Virchow, Fabian A1 - Uğur, Gamze T1 - Journalismus und Rassismus in einer postmigrantischen Gesellschaft. Diversität als Herausforderung an die Berichterstattung über die rechtsterroristischen Morde in Hanau JF - Medien & Kommunikationswissenschaft N2 - Die Berichterstattung der überregionalen Wochen- und Tagespresse (Die Zeit, Süddeutsche Zeitung, Frankfurter Allgemeine Zeitung) sowie der Lokalberichterstattung (Hanauer Anzeiger) über den rechtsterroristischen Anschlag in Hanau am 19.02.2020 ist Gegenstand des Beitrags. Die zentrale Frage lautet, inwiefern sich die Berichterstattung an der sozialen Realität der postmigrantischen Gesellschaft orientiert: Kriterien, die dafür an eine „diversitätsbewusste“ Berichterstattung angelegt werden, werden aus dem Forschungsstand zu Diversität im Journalismus einerseits und einer interdisziplinär fundierten Diskussion des Diversitätsbegriffs andererseits entwickelt. Befunde der wissenssoziologisch fundierten diskursanalytischen Untersuchung der Daten (675 Artikel im Erhebungszeitraum 19.02.2020 bis 29.02.2024) strukturieren wir in diesem Beitrag entlang folgender Fragen: Auf welche Weise(n) wird Rassismus aufgerufen und in seiner gesellschaftlichen und politischen Verankerung thematisiert? Gelingt eine anerkennende Repräsentation von Betroffenen ohne „Othering“ und Hierarchisierung? In welcher Weise gelingt ein „Geltendmachen pluraler Existenz“ in der Presseberichterstattung, indem Zugehörigkeit(en) zu einem „diversen Wir“ entworfen oder aber Exklusionen vorgenommen werden. KW - FBSK_Webseite Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59584 SN - 1615-634X VL - 73 IS - 3 SP - 315 EP - 333 PB - Nomos Verlag ER - TY - CHAP A1 - Fiedler, Felicitas A1 - Ackermann, David A1 - Brinkmann, Fabian A1 - Schneider, Martin A1 - Weinzierl, Stefan ED - Schmidt, Gerhard ED - Nolte, Bodo ED - Heute, Ulrich T1 - Entwicklung und Evaluation eines Mikrofonarrays für die Aufnahme von räumlichen Schallfeldern nach dem Motion-Tracked Binaural (MTB) Verfahren T2 - Fortschritte der Akustik – DAGA 2017: 43. Jahrestagung für Akustik, 06. - 09. März 2017 in Kiel Y1 - 2017 SN - 978-3-939296-12-6 SP - 1115 EP - 1117 PB - Deutsche Gesellschaft für Akustik e.V. CY - Berlin ER - TY - CHAP A1 - Aspöck, Lukas A1 - Brinkmann, Fabian A1 - Ackermann, David A1 - Weinzierl, Stefan A1 - Vorländer, Michael ED - Seeber, Bernhard T1 - Eine Datenbank zur Validierung von akustischen Simulationen T2 - Fortschritte der Akustik – DAGA 2018: 44. Jahrestagung für Akustik, 19.-22. März 2018 in München Y1 - 2018 SN - 978-3-939296-13-3 SP - 1337 EP - 1337 PB - Deutsche Gesellschaft für Akustik e.V. CY - Berlin ER - TY - CHAP A1 - Böhm, Christoph A1 - Ackermann, David A1 - Weinzierl, Stefan ED - Seeber, Bernhard T1 - Eine mehrkanalige und nachhallfreie Aufnahme von Beethovens 8. Sinfonie T2 - Fortschritte der Akustik – DAGA 2018 - 44. Jahrestagung für Akustik 19.-22. März 2018, München Y1 - 2018 UR - https://doi.org/10.14279/depositonce-8678 SN - 978-3-939296-14-0 U6 - https://doi.org/10.14279/depositonce-8678 SP - 112 EP - 115 PB - Deutsche Gesellschaft für Akustik e.V. CY - Berlin ER - TY - CHAP A1 - Greif, Jakob A1 - Ackermann, David A1 - Kokabi, Omid A1 - Weinzierl, Stefan T1 - Kann man die Form eines Konzertsaales hören? Ein audiovisueller Test in simulierten 3D-Umgebungen [Abstract] T2 - Fortschritte der Akustik – DAGA 2020 - 46. Jahrestagung für Akustik, 16.-19. März 2020, Hannover Y1 - 2020 UR - https://web.archive.org/web/20240707010113/https://pub.dega-akustik.de/DAGA_2020/data/articles/000432.pdf SN - 978-3-939296-17-1 SP - 1153 EP - 1156 PB - Deutsche Gesellschaft für Akustik e.V. ER - TY - JOUR A1 - Brinkmann, Fabian A1 - Aspöck, Lukas A1 - Ackermann, David A1 - Lepa, Steffen A1 - Vorländer, Michael A1 - Weinzierl, Stefan T1 - A Round Robin on Room Acoustical Simulation and Auralization JF - Journal of the Acoustical Society of America N2 - A round robin was conducted to evaluate the state of the art of room acoustic modeling software both in the physical and perceptual realms. The test was based on six acoustic scenes highlighting specific acoustic phenomena and for three complex, “real-world” spatial environments. The results demonstrate that most present simulation algorithms generate obvious model errors once the assumptions of geometrical acoustics are no longer met. As a consequence, they are neither able to provide a reliable pattern of early reflections nor do they provide a reliable prediction of room acoustic parameters outside a medium frequency range. In the perceptual domain, the algorithms under test could generate mostly plausible but not authentic auralizations, i.e., the difference between simulated and measured impulse responses of the same scene was always clearly audible. Most relevant for this perceptual difference are deviations in tone color and source position between measurement and simulation, which to a large extent can be traced back to the simplified use of random incidence absorption and scattering coefficients and shortcomings in the simulation of early reflections due to the missing or insufficient modeling of diffraction. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59034 SN - 0001-4966 VL - 145 IS - 4 SP - 2746 EP - 2760 PB - Acoustical Society of America ER - TY - JOUR A1 - Ackermann, David A1 - Brinkmann, Fabian A1 - Zotter, Franz A1 - Kob, Malte A1 - Weinzierl, Stefan T1 - Comparative Evaluation of Interpolation Methods for the Directivity of Musical Instruments JF - EURASIP Journal on Audio, Speech, and Music Processing N2 - Measurements of the directivity of acoustic sound sources must be interpolated in almost all cases, either for spatial upsampling to higher resolution representations of the data, for spatial resampling to another sampling grid, or for use in simulations of sound propagation. The performance of different interpolation techniques applied to sparsely sampled directivity measurements depends on the sampling grid used but also on the radiation pattern of the sources themselves. Therefore, we evaluated three established approaches for interpolation from a low-resolution sampling grid using high-resolution measurements of a representative sample of musical instruments as a reference. The smallest global error on average occurs for thin plate pseudo-spline interpolation. For interpolation based on spherical harmonics (SH) decomposition, the SH order and the spatial sampling scheme applied have a strong and difficult to predict influence on the quality of the interpolation. The piece-wise linear, spherical triangular interpolation provides almost as good results as the first-order spline approach, albeit with on average 20 times higher computational effort. Therefore, for spatial interpolation of sparsely sampled directivity measurements of musical instruments, the thin plate pseudo-spline method applied to absolute-valued data is recommended and, if necessary, a subsequent modeling of the phase KW - Source directivity KW - Spatial interpolation KW - Musical instruments Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-58992 SN - 1687-4722 VL - 2021 IS - 1 PB - Springer Nature ER - TY - GEN A1 - Müller, Regine T1 - Aufwachsen in öffentlicher Verantwortung: Teilhabe ermöglichen und Kinderarmut vermeiden T2 - KiTa aktuell: Fachzeitschrift für Leitungen, Fachkräfte und Träger der Kindertagesbetreuung KW - Teilhabe KW - Armut KW - Kind Y1 - 2012 SN - 0943-0237 IS - 4 SP - 103 EP - 105 ER - TY - GEN A1 - Funke, Kira A1 - Müller, Regine ED - Elzer, Reinhard T1 - Teilhabe ermöglichen: Förderprogramm gestartet T2 - Jugendhilfe-Report: Informationen aus dem Landesjugendamt Rheinland KW - Teilhabe KW - Förderungsprogramm KW - Landschaftsverband Rheinland Y1 - 2011 UR - https://web.archive.org/web/20160909103354/https://www.lvr.de/media/wwwlvrde/jugend/service/publikationen/dokumente_97/Jugendhilfereport_4_2011.pdf VL - 4/11 SP - 32 EP - 35 ER - TY - BOOK ED - Müller, Regine ED - Nüsken, Dirk T1 - Child Protection in Europe: Von den Nachbarn lernen – Kinderschutz qualifizieren KW - Kinderschutz KW - Europa Y1 - 2010 SN - 9783830924036 PB - Waxmann CY - Münster, New York, München, Berlin ER - TY - CHAP A1 - Müller, Regine ED - Müller, Regine ED - Nüsken, Dirk T1 - „Child Protective Service“ im Vergleich. Ein Modell der wohlfahrtsstaatlichen Verortung der Fachkräfte im Kinderschutz T2 - Child Protection in Europe: Von den Nachbarn lernen – Kinderschutz qualifizieren KW - Kinderschutz KW - Fachkraft KW - Wohlfahrtsstaat KW - Europa Y1 - 2010 SN - 9783830924036 SP - 31 EP - 54 PB - Waxmann CY - Münster, New York, München, Berlin ER - TY - CHAP A1 - Feistel, Stefan A1 - Ackermann, David A1 - Weinzierl, Stefan T1 - Using High-Resolution Directivity Data of Musical Instruments for Acoustic Simulation and Auralization T2 - Proceedings of the 155th Audio Engineering Society Conventio, New York, 25-27th of October 2023. Y1 - 2023 PB - Audio Engineering Society ER - TY - CHAP A1 - Fiebig, André A1 - Ackermann, David A1 - Böhm, Sandra A1 - Chudalla, Michael A1 - Karakantas, Athansios A1 - Oehme, Astrid A1 - Pourpart, Sophie A1 - Schuck, Moritz A1 - Strigari, Fabio A1 - Weinzierl, Stefan T1 - Attribute zur gesamtheitlichen Charakterisierung der Wahrnehmung von Straßenverkehrsgeräuschen T2 - Fortschritte der Akustik – DAGA 2022 - 48. Jahrestagung für Akustik 21.-24. März 2022, Stuttgart und Online Y1 - 2022 SN - 978-3-939296-20-1 U6 - https://doi.org/10.14279/depositonce-15552 SP - 500 EP - 503 PB - Deutsche Gesellschaft für Akustik e.V. ER - TY - CHAP A1 - Bögelein, Silke A1 - Brinkmann, Fabian A1 - Ackermann, David A1 - Weinzierl, Stefan T1 - Localization Cues of a Spherical Head Model [Abstract] T2 - Fortschritte der Akustik – DAGA 2018 - 44. Jahrestagung für Akustik 19.-22. März 2018, München Y1 - 2018 UR - https://pub.dega-akustik.de/DAGA_2018/data/articles/000459.pdf SN - 978-3-939296-13-3 SP - 347 EP - 350 PB - Deutsche Gesellschaft für Akustik e.V. ER - TY - JOUR A1 - Ackermann, David A1 - Böhm, Christoph A1 - Brinkmann, Fabian A1 - Weinzierl, Stefan T1 - The Acoustical Effect of Musicians’ Movements During Musical Performances JF - Acta Acustica united with Acustica N2 - Acoustic musical instruments act as dynamic sound sources communicating the expressive intentions of a performer to the audience in a dedicated spatial environment. From an acoustical point of view, the directivity of musical instruments is relevant both for the loudness and timbre of an instrument at a certain position in the audience, as well as for the spatial characteristics of the generated sound field. Musical instruments, however, are dynamic sound sources always moved by musicians as an element of their performance on stage. This work aims at assessing the acoustical effect and the perceptual relevance of these movements. For this purpose, we have recorded solo musical performances with all standard orchestral instruments with an optical motion tracking system, as well as the corresponding audio signals. The effect of the movements was evaluated by analysing the spectral fluctuation and the time-dependence of room acoustical parameters in a virtual acoustic environment in anechoic and reverberant conditions. In a subsequent listening test, an auralization of the static and dynamic musical performance was presented to listeners by binaural synthesis, showing that the signal-related fluctuations are clearly audible both in anechoic and reverberant situations. We discuss different approaches how to consider these effects for the simulation of natural acoustic sources in virtual acoustic reality. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59024 SN - 1861-9959 VL - 105 IS - 2 SP - 356 EP - 367 PB - Hirzel ER - TY - JOUR A1 - Ackermann, David A1 - Fiedler, Felicitas A1 - Brinkmann, Fabian A1 - Schneider, Martin A1 - Weinzierl, Stefan T1 - On the Acoustic Qualities of Dynamic Pseudo-Binaural Recordings JF - Journal of the Audio Engineering Society N2 - The motion-tracked binaural (MTB) technique allows the dynamic, pseudobinaural rendering of spatial sound scenes recorded by a circular array of microphones on a rigid sphere. The system provides a multichannel live audio transmission from which a head-related signal with approximated interaural time and level differences can be derived and played via headphones, head tracking, and a corresponding rendering software. The latter is mainly calculating imperceptible interpolation between channel pairs during head movements. This contribution evaluates the potential of this format for the creation of virtual acoustic envi- ronments. Based on the technical realization of a 16-channel MTB array with omnidirectional diffuse field-corrected electret condenser microphone capsules, the plausibility of 8 and 16-channel recordings was tested against a physical sound source. Furthermore, the sound quality of the pseudobinaural rendering was assessed based on different items of the Spatial Audio Quality Inventory (SAQI) compared to a true dynamic binaural reference. The results show that the overall plausibility of the MTB signal with optimal interpolation is close to the reference. Even if there are small differences with respect to tone color and spatial sound source attributes, the degree of externalization and even the perceived source elevation were, despite the absence of pinna cues, well comparable to the true binaural reference. KW - acoustics KW - pseudobinaural recording KW - motion-tracked binaural KW - MTB KW - microphone KW - sound Y1 - 2020 U6 - https://doi.org/10.17743/jaes.2020.0036 SN - 0004-7554 VL - 68 IS - 6 SP - 418 EP - 427 PB - Audio-Engineering Society ER - TY - CHAP A1 - Jendreiko, Christian ED - Azzolini, Damiano ED - Batsakis, Sotirios ED - Borroto Santana, Manuel Alejandro ED - Bruno, Pierangela ED - Cecchi, Laura A. ED - Fandinno, Jorge ED - Hecher, Markus ED - Maratea, Marco ED - Morales, José F. ED - Muñiz, Brais ED - Papadakis, Emmanuel ED - Robaldo, Livio ED - Serafini, Luciano ED - Lo Scudo, Fbrizio ED - Tachmazidis, Ilias ED - Tarzariol, Alice ED - Vallati, Mauro ED - Wyner, Adam T1 - The Simple Generative Logic Grammar: A tool for teaching logical thinking through visual research in art and design T2 - CEUR Workshop Proceedings: Joint Proceedings of the Workshops and Doctoral Consortium of the 41st International Conference on Logic Programming, September 9–13, 2025, Rende, Italy N2 - The Simple Generative Logic Grammar (SGLG) is a newly developed, very simply structured type of logic grammar designed for generating structured visual compositions. This paper examines its key features and explores its potential to play a central role in the educational framework Exploring Generative Logic (EGL) that I am currently developing. [1] At the heart of EGL is the idea of using the artistic creation of images composed of discrete elements to introduce students particularly in art and design to fundamental concepts in logic programming, formal grammars, and database systems in an accessible way. KW - Generative Logic KW - Logical Thinking KW - Logic Programming KW - Prolog KW - Visual Research KW - Paul Klee KW - Teaching Prolog KW - Generative Design KW - Computer Art Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59231 SN - 1613-0073 VL - 4117 PB - RWTH Aachen ER - TY - THES A1 - Ackermann, David T1 - Dynamic Sound Sources for Virtual Acoustic Reality: Description, Implementation and Evaluation N2 - terns, especially those presented by natural sources such as musical instruments or human voices, is crucial. While static sound sources, such as loudspeakers, have a relatively consistent acoustic footprint, dynamic sources present a multi-faceted set of challenges. Musical instruments, for example, have dynamic radiation patterns. The directivity of these instruments changes not only with frequency, but also with the specific note being played, and with the performer's gestures. These dynamic effects of directivity influences both the perceived loudness and the timbre at a given location within the audience and shapes the spatial characteristics of the sound field produced. This modulation is crucial when recreating authentic acoustic environments, whether in a virtual environment or in real-world architectural designs. Essentially, for an acoustic simulation to be considered accurate, it must capture these nuances. The intricate interplay of directivity, pitch and motion significantly shapes the listening experience and requires deeper integration of these elements into future simulations and designs. N2 - Die computergestützte Akustiksimulation ist zu einem wichtigen Instrument für die Gestaltung verschiedener akustischer Umgebungen geworden. Das Verständnis der komplexen Abstrahlungsmuster, insbesondere von natürlichen Quellen wie Musikinstrumenten oder menschlichen Stimmen, ist dabei von entscheidender Bedeutung. Während statische Schallquellen, wie z. B. Lautsprecher, einen relativ konsistenten akustischen Fußabdruck haben, stellen dynamische Quellen eine Reihe von Herausforderungen dar. Musikinstrumente zum Beispiel haben dynamische Abstrahlungsmuster. Die Richtwirk- ung dieser Instrumente ändert sich nicht nur mit der Frequenz, sondern auch mit der gespielten Note und mit den Gesten der Interpret*innen. Diese dynamischen Effekte der Richtcharakteristik beeinflussen sowohl die wahrgenommene Lautstärke als auch die Klangfarbe an einem bestimmten Ort im Publikum und formen die räumlichen Eigenschaften des erzeugten Klangfeldes. Diese Modulation ist entscheidend für die Nachbildung authentischer akustischer Umgebungen, sei es in einer virtuellen Umgebung oder in realen architektonischen Designs. Damit eine akustische Simulation als akkurat gelten kann, muss sie diese Nuancen erfassen. Das komplexe Zusammenspiel von Richtwirkung, Tonhöhe und Bewegung prägt signifikant das Hörerlebnis und erfordert eine tiefere Integration dieser Elemente in künftige Simulationen und Designs. KW - Musikalische Akustik KW - Virtuelle Akustik KW - virtual acoustics KW - musical acoustics KW - sound sources KW - Schallquellen Y1 - 2024 U6 - https://doi.org/10.14279/depositonce-19949 PB - TU Berlin CY - Berlin ER - TY - GEN A1 - Köhler, Denis A1 - Müller, Romina A1 - Josupeit, Jan A1 - Huchzermeier, Christian T1 - KPI - Kieler Psychopathie-Inventar: Ein Fragebogen zur Selbstbeurteilung psychopathischer Persönlichkeitseigenschaften KW - FBSK_Webseite KW - Psychometrie KW - Klinisch-psychologischer Test KW - Psychopathie Y1 - 2025 PB - Hogrefe CY - Göttingen ER - TY - GEN T1 - 1041 - Erste Satzung zur Änderung der Fachbereichsordnung für den Fachbereich Elektro- und Informationstechnik an der Hochschule Düsseldorf vom 16.12.2025 N2 - Aufgrund der §§ 2 Abs. 4 S. 1, 26 Abs. 3 S. 2 des Gesetzes über die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell gültigen Fassung und der Grundordnung der Hochschule Düsseldorf (GO HSD) vom 08.10.2015 (Verkündungsblatt der Hochschule Düsseldorf, Amtliche Mitteilung Nr. 414) in der aktuell gültigen Fassung hat der Fachbereich Elektro- und Informationstechnik der Hochschule Düsseldorf die fol-gende Ordnung als Satzung erlassen. T3 - Amtliche Mitteilungen : Verkündungsblatt der Hochschule Düsseldorf - 1041 KW - Amtliche Mitteilungen Y1 - 2025 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-59217 CY - Düsseldorf ER - TY - JOUR A1 - Ackermann, David A1 - Domann, J. A1 - Brinkmann, Fabian A1 - Arend, Jan M. A1 - Schneider, Martin A1 - Pörschmann, Christoph A1 - Weinzierl, Stefan T1 - Recordings of a Loudspeaker Orchestra with Multichannel Microphone Arrays for the Evaluation of Spatial Audio Methods JF - Journal of the Audio Engineering Society Y1 - 2023 U6 - https://doi.org/10.17743/jaes.2022.0059 VL - 71 IS - 1/2 SP - 62 EP - 73 PB - Audio Engineering Society ER - TY - CHAP A1 - Grigoriev, Dmitry A1 - Ackermann, David A1 - Pelzer, Sönke A1 - Weinzierl, Stefan T1 - Ein psychologisches Messinstrument für die akustische Wahrnehmung von Räumen für Musik und Sprache: Stimulus-Erzeugung T2 - Fortschritte der Akustik – DAGA 2016: 42. Deutsche Jahrestagung für Akustik, 14.-17. März 2016 in Aachen Y1 - 2016 SN - 978-3-939296-10-2 SP - 309 EP - 312 PB - Deutsche Gesellschaft für Akustik e.V. CY - Berlin ER - TY - CHAP A1 - Lemke, Mathias A1 - Hölter, Arne A1 - Ackermann, David A1 - Weinzierl, Stefan T1 - Bestimmung von Richtcharakteristiken unter Berücksichtigung reflektierender Randbedingungen T2 - Fortschritte der Akustik – DAGA 2024 - 50. Jahrestagung für Akustik, 18.-21. März 2024, Hannover Y1 - 2024 UR - https://pub.dega-akustik.de/DAGA_2024/files/upload/paper/67.pdf SN - 978-3-939296-22-5 SP - 648 EP - 650 PB - Deutsche Gesellschaft für Akustik e.V. CY - Berlin ER - TY - CHAP A1 - Lemke, Mathias A1 - Hölter, Arne A1 - Ackermann, David A1 - Weinzierl, Stefan T1 - Physikalisch informierte Interpolation von Richtcharakteristiken [Manuskript] T2 - Fortschritte der Akustik – DAGA 2023 - 49. Jahrestagung für Akustik 06. - 09. März 2023, Hamburg Y1 - 2023 UR - https://pub.dega-akustik.de/DAGA_2023/data/articles/000069.pdf SN - 978-3-939296-21-8 SP - 1656 EP - 1659 PB - Deutsche Gesellschaft für Akustik e.V. CY - Berlin ER - TY - JOUR A1 - Kob, Malte A1 - Ackermann, David A1 - Weinzierl, Stefan A1 - Zotter, Franz T1 - Dynamische Richtwirkung von Musikinstrumenten JF - Akustik Journal Y1 - 2018 UR - https://www.dega-akustik.de/fileadmin/dega-akustik.de/publikationen/akustik-journal/18-03/akustik_journal_2018_03_online_artikel3.pdf SN - 2569-1597 VL - 3 SP - 28 EP - 38 PB - Deutsche Gesellschaft für Akustik e.V. ER - TY - CHAP A1 - Ebert, Julian A1 - Ackermann, David A1 - Weinzierl, Stefan T1 - Messung der Richtcharakteristik von Mikrofonen mit hoher Auflösung [Manuscript] T2 - Fortschritte der Akustik – DAS\DAGA 2025 Y1 - 2025 SN - 978-3-939296-23-2 U6 - https://doi.org/10.71568/dasdaga2025.178 SP - 487 EP - 490 PB - Deutsche Gesellschaft für Akustik eV (DEGA) CY - Berlin ER - TY - GEN A1 - Ackermann, David A1 - Domann, Julian A1 - Brinkmann, Fabian A1 - Arend, Johannes M. A1 - Weinzierl, Stefan T1 - Database: Recordings of a Loudspeaker Orchestra with Multi-Channel Microphone Arrays for the Evaluation of Spatial Audio Methods N2 - For a comparative physical and perceptual evaluation of conceptually different binaural rendering techniques, recordings are needed in which all other factors affecting the sound, such as the sound radiation of the sources, the room acoustic environment and the recording position are kept constant. To provide such a recording, the sound field of an 18-channel loudspeaker orchestra fed by anechoic recordings of a chamber orchestra was captured in two rooms with nine different receivers. In addition, impulse responses were recorded for each sound source and receiver. The anechoic audio signals, the full loudspeaker orchestra recordings and all measured impulse responses are available with open access in the SOFA 2.1 (AES69-2022) format. KW - loudspeaker orchestra KW - multi-channel microphone arrays KW - Lautsprecherorchester KW - mikrofonarray Y1 - 2022 UR - https://doi.org/10.17743/jaes.2022.0059 U6 - https://doi.org/10.14279/depositonce-15774.3 PB - TU Berlin CY - Berlin ER - TY - GEN A1 - Aspöck, Lukas A1 - Brinkmann, Fabian A1 - Ackermann, David A1 - Weinzierl, Stefan A1 - Vorländer, Michael T1 - BRAS – A Benchmark for Room Acoustical Simulation KW - Room acoustic simulation KW - virtual acoustic Y1 - 2019 UR - https://doi.org/10.1016/j.apacoust.2020.107867 U6 - https://doi.org/10.14279/depositonce-6726.3 PB - TU Berlin CY - Berlin ER - TY - JOUR A1 - Ackermann, David A1 - Brinkmann, Fabian A1 - Weinzierl, Stefan T1 - Musical instruments as dynamic sound sources JF - Journal of the Acoustical Society of America N2 - Unlike electro-acoustic sound sources, musical instruments have a time-varying, dynamic directivity, due to the note-dependent radiation behavior of the instrument and due to the expressive movements that musicians perform with their instrument. While previous studies have generally examined the directivity of the static, unmoved instrument for specific notes played, we show the individual and combined contributions of these two factors to a temporal modulation of the radiation behavior, based on motion tracking of typical movement patterns for all instruments of a classical symphony orchestra and on the directivity measured for all partials over the entire pitch range of these instruments. The effect of this modulation, which is manifested by changes in timbre and room acoustic excitation, was determined by spectral variations in the free field and under reverberant conditions, as well as by a modulation of room acoustic parameters. Our results show that these effects are well above the just noticeable differences for all musical instruments and all perceptual variables considered. While the effect of motion dominates for brass instruments, string and woodwind instruments exhibit large note-related differences, which should be taken into account in virtual acoustic realities if an auditory liveliness comparable to physical reality is to be achieved. Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-58972 SN - 1520‑8524 VL - 155 SP - 2302 EP - 2313 PB - Acoustical Society of America ER - TY - JOUR A1 - Ackermann, David A1 - Böhm, Christoph A1 - Weinzierl, Stefan T1 - On the numerical simulation of natural acoustic sound sources [Meeting Abstract] JF - The Journal of the Acoustical Society of America N2 - A convincing auralization of acoustical scenes does not only require a proper modeling of the sound propagation between source and receiver, but also an appropriate representation of the acoustical source itself. While the properties of electro-acoustic sources can be well represented by advanced loudspeaker formats with high resolution, the complex, time-variant behavior of natural acoustic sources such as speakers, singers or musical instruments is not in any way considered by current techniques for acoustical simulation and auralization. In the talk, we will present measurement results of the sound power and directivity of natural acoustic sound sources and their dependence on pitch and dynamic level, as well as measurements of typical movements of the source during musical performances. We will demonstrate the physical and perceptual relevance of these effects both in the direct field and in room acoustical environments based on a technical and perceptual evaluation, and discuss new approaches to include these effects in numerical simulations. KW - Acoustics KW - Musical instruments KW - Musical performance KW - Sound production technology KW - Computer simulation Y1 - 2017 U6 - https://doi.org/10.1121/1.4989163 SN - 0001-4966 SN - 1520-8524 VL - 141 IS - 5_Supplement SP - 3997 EP - 3997 ER -