TY - CHAP A1 - Echternacht, David A1 - Schermuly, Rainer ED - Cichowski, Rolf Rüdiger T1 - Simulation der Auswirkungen privater Ladeinfrastruktur auf Niederspannungsnetze T2 - Anlagentechnik 2020 Y1 - 2019 SN - 978-3-8007-4838-9 SP - 149 EP - 158 PB - VDE Verlag CY - Berlin ET - Neuerscheinung ER - TY - JOUR A1 - Deutsch, Thomas A1 - Reimes, Jan A1 - Fiebig, André A1 - Oehler, Michael T1 - Relevance of stimuli and test environment in the perceptual evaluation of car audio systems JF - Applied Acoustics KW - ISAVE Y1 - 2019 U6 - https://doi.org/10.1016/j.apacoust.2019.07.027 VL - 156 SP - 404 EP - 415 PB - Elsevier ER - TY - JOUR A1 - Deckert, Carsten A1 - Schomaker, Rahel M. T1 - Kultur und Innovation – Wie sich kulturelle Faktoren auf die nationale Innovationsfähigkeit auswirken JF - Der Betriebswirt KW - Innovation Y1 - 2019 U6 - https://doi.org/10.3790/dbw.60.2.18 SN - 2628-7846 VL - 60 IS - 2 SP - 18 EP - 23 PB - Duncker & Humblot ER - TY - JOUR A1 - Deckert, Carsten A1 - Schomaker, Rahel M. T1 - Cultural Impacts on National Innovativeness: Not Every Cultural Dimension Is Equal JF - Cross-Cultural Research Y1 - 2019 U6 - https://doi.org/10.1177/1069397118799700 VL - 53 IS - 2 SP - 186 EP - 214 PB - sage journals ER - TY - JOUR A1 - Deckert, Carsten A1 - Görs, Nadine T1 - Transport carbon footprint in the german courier, express and parcel industry (CEP industry) JF - Sustainability Management Forum | NachhaltigkeitsManagementForum Y1 - 2019 U6 - https://doi.org/10.1007/s00550-018-0471-1 VL - 27 IS - 1 SP - 23 EP - 30 PB - Springer ER - TY - JOUR A1 - Deckert, Carsten T1 - Spannungsfelder der Teamkreativität: Wie Teamklima und -kontext zur Kreativität beitragen JF - Ideen und Innovationsmanagement N2 - Dieser Beitrag untersucht die Spannungsfelder der Teamkreativität. Die Spannungsfelder basieren auf einer grundlegenden Spannung aus Originalität und Effektivität, die der Standarddefinition der Kreativität zugrunde liegt. Es lassen sich auf Basis des Teamklimas und -kontextes Spannungsfelder hinsichtlich Konformität, Konsens und Kohäsion identifizieren. Mit Bezug zur Konformität müssen Teams ein positives Spannungsfeld aus der Unterstützung für Innovation und Aufgabenorientierung erreichen, um gleichzeitig Experimentierfreude zu fördern und hohe Qualitätsansprüche zu erzielen. Konsens entsteht im Spannungsfeld aus konstruktivem Konflikt und partizipatorischer Entscheidungsfindung. Bei der Kohäsion besteht eine Spannung zwischen der Teamidentität (Geborgenheit) und den individuellen Identitäten der Teammitglieder (Diversität). Der Beitrag beschreibt, wie diese drei Spannungsfelder zusammenarbeiten, wenn außergewöhnliche Kreativität in Teams entsteht. KW - Teamwork KW - Teamkreativität Y1 - 2019 SN - 2198-3143 IS - 4 SP - 116 EP - 120 ER - TY - CHAP A1 - de Bánffy-Hall, Alicia A1 - Hill, Burkhard ED - Hartogh, Theo ED - Wickel, Hans Hermann T1 - Community Music T2 - Handbuch Musik in der Sozialen Arbeit Y1 - 2019 SN - 978-3-7799-3136-2 SP - 98 EP - 111 PB - Beltz Juventa CY - Weinheim; Basel ER - TY - CHAP A1 - de Bánffy-Hall, Alicia ED - Grätz, Ronald ED - Höppner, Christian T1 - Instrumente sozialen Wandels T2 - Musik öffnet Welten Y1 - 2019 SN - 978-3-95829-526-1 VL - Perspektive Außenkulturpolitik, Band 6 SP - 171 EP - 176 PB - Steidl CY - Göttingen ER - TY - CHAP A1 - de Bánffy-Hall, Alicia ED - van der Sandt, Johann T1 - Pedagogia critica e Community Music in Germania T2 - La community music in Italia Y1 - 2019 SN - 978-8843096848 VL - Biblioteca di testi e studi Musica, 1271 PB - Carocci CY - Roma ER - TY - BOOK A1 - de Bánffy-Hall, Alicia T1 - The development of community music in Munich N2 - In German music education, the focus has historically been on formal music education in schools. Participatory music making in the community, or community music, has so far received little attention in theory or practice. This thesis constitutes the first in-depth analysis of the development of community music in Germany, conducted using empirical data and literature analysis. The development of the Munich Community Music Action Research Group is highlighted as an example of the potential of community music in the German context. The research shows that the context-specific development of a framework for community music in Germany, within the community music spirit of participation reflected in the action research methodology, gives voice to and connects community musicians, and has contributed considerably to the development of community music theory and practice, not only in Munich, but across Germany. Y1 - 2019 SN - 978-3-8309-4018-0 N1 - Dissertation VL - Internationale Hochschulschriften, Bd. 665 PB - Waxmann ER - TY - JOUR A1 - Biedermann, Till M. A1 - Reich, Marius A1 - Kameier, Frank A1 - Adam, Mario T1 - Assessment of statistical sampling methods and approximation models applied to aeroacoustic and vibroacoustic problems JF - Advances in Aircraft and Spacecraft Science KW - artificial neural networks KW - design of experiments KW - Latin hypercube sampling KW - aeroacoustics KW - aerodynamics KW - spectral analysis Y1 - 2019 UR - http://www.techno-press.org/content/?page=article&journal=aas&volume=6&num=6&ordernum=7 U6 - https://doi.org/10.12989/aas.2019.6.6.531 SN - 2287-528X VL - 6 IS - 6 SP - 529 EP - 550 PB - Techno Press ER - TY - JOUR A1 - Biedermann, Till M. A1 - Kameier, F. A1 - Paschereit, C. O. T1 - Successive Aeroacoustic Transfer of Leading Edge Serrations From Single Airfoil to Low-Pressure Fan Application JF - Journal of Engineering for Gas Turbines and Power KW - ISAVE Y1 - 2019 U6 - https://doi.org/10.1115/1.4044362 VL - 141 IS - 10 PB - ASME ER - TY - JOUR A1 - Biedermann, Till M. A1 - Czeckay, Pasquale A1 - Geyer, Thomas F. A1 - Kameier, Frank A1 - Paschereit, Christian O. T1 - Effect of Inflow Conditions on the Noise Reduction Through Leading Edge Serrations JF - AIAA Journal Y1 - 2019 U6 - https://doi.org/10.2514/1.j057831 SN - 1533-385X VL - 57 IS - 9 SP - 4104 EP - 4109 PB - ARC ER - TY - THES A1 - Biedermann, Till M. T1 - Aeroacoustic transfer of leading edge serrations from single aerofoils to low-pressure fan applications N2 - Leading edge serrations are well-known for their aeroacoustic potential in reducing aerofoil-turbulence interaction noise and are also associated with certain aerodynamic advantages. To prepare leading edge serrations for industrial application, two obstacles remain to be addressed. First is a combined analysis of the aeroacoustic and the aerodynamic performance of leading edge serrations to develop optimum designs. Second is the need to examine the transferability of the known effects of leading edge serrations from a single aerofoil to full rotors, which are considered to be the final area of application. This thesis aims to assist in the transfer of a well-investigated aerofoil with serrated leading edges from the rigid to the rotating domain. With this purpose, a single aerofoil type is selected and thoroughly analysed, experimentally and numerically, to generate a reliable data basis for aerodynamic performance and noise reduction capability. Aside from gathering information on the overall performance, the spatial distribution of the noise sources is localised, and the spectral composition of the noise reduction is found to follow a clearly defined scaling law. Aerodynamically, generated vortices are found to be responsible for a complex three-dimensional separation mechanism of the leading edge serrations, causing a delay of stall. The generated data basis is then used to design low-pressure axial fans of minimum complexity by keeping the initially chosen aerofoil type. The experimentally identified noise reduction mechanisms for the serrated axial fans are found to be more diverse than the single aerofoil and highly dependent on the inflow conditions and the operation point of the fan. A highly similar pattern for the spectral scaling of the noise reduction supports the finding that at optimum operation conditions, the previously identified noise reduction mechanisms for the single aerofoils are transferable to the rotating domain. On the other hand, additional aerodynamic mechanisms are found to dominate the noise reduction for the instability region of the fan, also contributing to reduced blade-to-blade interaction effects. Moreover, the blade-tip leakage flow is altered by delaying the development of coherent structures. The next step towards a more general description of the aeroacoustic and aerodynamic dependencies is developing a comprehensive model based on artificial neural networks. This model allows a combined analysis of the aerodynamic and acoustic performance of rotors with serrated leading edges and shows an accurate prediction of the overall performance and the spectral composition of the radiated noise. It also enables the development of multi-objective optima for serration designs and motivates further studies into the generalisability of the observed trends. Furthermore, the developed model represents a feasible tool to create tailored serration designs for maximum efficiency in both aeroacoustics and aerodynamics, contributing to the development of future low-noise fans and rotating machinery. N2 - Leading Edge Serrations sind hinlänglich für ihr Potential zur Reduktion von turbulenzinduziertem Schall bekannt. Ebenso können sie sich als aerodynamisch vorteilhaft erweisen. Mit dem Ziel, Leading Edge Serrations industriellen Anwendungen zugänglich zu machen, verbleiben primär noch zwei Hemmnisse. Zum einen die Notwendigkeit einer kombinierten Bewertung des aerodynamischen und des aeroakustischen Potentials mit dem Ziel der Identifikation optimaler Designansätze. Zum anderen sind Aussagen hinsichtlich der Übertragbarkeit der bekannten Schallreduktionsmechanismen von einem einzelnen Tragflügel hin zu rotierenden Strömungsmaschinen zu treffen, da letztere das finale Anwendungsgebiet von Leading Edge Serrations darstellen. Diese Arbeit zielt darauf ab, bei dem Transfer eines umfassend analysierten Tragflügeldesigns mit Leading Edge Serrations hin zu einem rotierenden System zu assistieren. Hierzu wird ein für spätere rotierende Anwendungen sinnvolles Tragflügelprofil gewählt und sowohl experimentell als auch numerisch umfassend untersucht, um eine Datenbasis des aerodynamischen und aeroakustischen Potentials zu generieren. Neben Informationen über die globalen Eigenschaften, wurde ebenfalls die räumliche Lage der Schallquellen lokalisiert. Zudem konnte der Verlauf des spektralen Schallreduktionsvermögens einer klaren Gesetzmäßigkeit zugeordnet werden. In Bezug auf die Aerodynamik wurden Wirbelstrukturen, welche sich an den Leading Edge Serrations bilden, als ursächlich für einen komplexen dreidimensionalen Ablösemechanismus identifiziert, welcher eine verzögerte Strömungsablösung bewirkt. Unter Beibehaltung des gewählten Tragflügelprofils wurde die generierte Datenbasis in einem zweiten Schritt zur Auslegung von axialen Niederdruckventilatoren niedriger Komplexität genutzt. Die hier experimentell identifizieren Schallreduktionsmechanismen sind, im Vergleich zu einem einzelnen Tragflügel, deutlich diverser und weisen eine klare Abhängigkeit vom Betriebspunkt des Ventilators sowie von den Einflussparametern auf. Unter optimalen Zuströmbedingungen kann eine klare Übertragbarkeit der Effekte vom ebenen in das rotierende System gezeigt werden. Im Gegensatz wird das Schallreduktionspotential im Instabilitätsbereich des Ventilators durch aerodynamische Strömungsphänomene dominiert, welche zudem zu einer vorteilhaften Beeinflussung von Schaufelinteraktionen beitragen. Des Weiteren wurde durch den Einsatz von Rotoren mit Leading Edge Serrations eine verzögerte Entstehung von kohärenten Strukturen im Blattspitzenbereich nachgewiesen. Um einen weiteren Schritt in Richtung einer globalen Beschreibung der erhaltenen aeroakustischen und aerodynamischen Abhängigkeiten zu gehen, wurde ein umfassendes Modell generiert, welches auf dem Training künstlicher neuronaler Netze beruht. Das generierte Modell ermöglicht eine kombinierte Prognose der aerodynamischen und aeroakustischen Performance der getesteten Prototypen und weist sowohl im Zeitbereich als auch hinsichtlich der spektralen Zusammensetzung der Signale eine hohe Prognosegüte auf. Dies ermöglicht die Definition multikriterieller Optima bezüglich des Serration Designs und motiviert weiterführende Studien hinsichtlich einer Generalisierbarkeit der beobachteten Trends. Schlussendlich ermöglicht das generierte Modell maßgeschneiderte Designansätze für eine maximale aerodynamische und aeroakustische Effizienz, was einen sinnvollen Beitrag zur zukünftigen Entwicklungen schallarmer Ventilatoren und Strömungsmaschinen darstellt. T2 - Strömungsakustischer Transfer von Leading Edge Serrations an einzelnen Tragflügeln hin zu Niederdruck-Axialventilatoren KW - aeroacoustics KW - aerodynamics KW - low-pressure axial fan KW - leading edge serrations KW - artificial neural networks KW - künstliche neuronale Netze KW - Vorderkantenzacken KW - Niederdruck-Axialventilatoren KW - Aerodynamik KW - Strömungsakustik Y1 - 2019 U6 - https://doi.org/10.14279/depositonce-9075 PB - Technische Universität Berlin CY - Berlin ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Gobinda Das, Sampad A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal A1 - Moghimi, M. A. T1 - Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Microchannel under Pulsating Inlet Flow Condition JF - E3S Web of Conferences Y1 - 2019 U6 - https://doi.org/10.1051/e3sconf/201912801011 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Guin, Anindya A1 - Benim, Ali Cemal T1 - Investigation of Inclined Turbulators for Heat Transfer Enhancement in a Solar Air Heater JF - Heat Transfer Engineering Y1 - 2019 U6 - https://doi.org/10.1080/01457632.2018.1474593 VL - 40 IS - 17/18 SP - 1451 EP - 1460 PB - Taylor & Francis ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Benim, Ali Cemal A1 - Chattopadhyay, Himadri A1 - Banerjee, Arnab T1 - Experimental investigation of heat transfer performance of corrugated tube with spring tape inserts JF - Experimental Heat Transfer Y1 - 2019 U6 - https://doi.org/10.1080/08916152.2018.1531955 SN - 0891-6152 VL - 32 IS - 5 SP - 411 EP - 425 PB - Taylor & Francis ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn A1 - Ocłoń, Paweł A1 - Taler, Jan T1 - Computational investigation of a lifted hydrogen flame with LES and FGM JF - Energy Y1 - 2019 U6 - https://doi.org/10.1016/j.energy.2019.02.133 SN - 0360-5442 VL - 173 SP - 1172 EP - 1181 PB - Elsevier ER - TY - CHAP A1 - Begemann, Maik-Carsten A1 - Liebig, Reinhard A1 - Bleck, Christian ED - Begemann, Maik-Carsten ED - Bleck, Christian ED - Liebig, Reinhard T1 - Wirkungsforschung zur Kinder- und Jugendhilfe - Versuch einer Bilanzierung T2 - Wirkungsforschung zur Kinder- und Jugendhilfe Y1 - 2019 SN - 9783779937746 SP - 292 EP - 313 PB - Beltz Juventa CY - Weinheim; Basel ER - TY - CHAP A1 - Begemann, Maik-Carsten A1 - Bleck, Christian A1 - Liebig, Reinhard ED - Begemann, Maik-Carsten ED - Bleck, Christian ED - Liebig, Reinhard T1 - Empirische Wirkungsforschung zur Kinder- und Jugendhilfe. Konzeptionelle Vorüberlegungen und Einführung in den Sammelband T2 - Wirkungsforschung zur Kinder- und Jugendhilfe Y1 - 2019 SN - 9783779937746 SP - 7 EP - 20 PB - Beltz Juventa CY - Weinheim; Basel ER -