TY - CHAP A1 - Schramm, Alexander A1 - Kruger, Karl A1 - Niemann, Jörg A1 - Grote, Wolfgang ED - Dimitrov, Dimiter ED - Hagedorn-Hansen, Devon ED - Leipzig, Karl von T1 - Possibilities, Limitations and Considerations for Eye Tracking in Industrial Environments: Experience from a Case Study T2 - International Conference on Competitive Manufacturing (COMA 19) proceedings : 30 January 2019-1 February 2019, Stellenbosch, South Africa N2 - Eye tracking is a measurement technique for determining the orientation and viewing direction of an individual’s eyes. It allows for an evaluation of the individual’s gaze and other related information.There is a wide variety of application areas for eye tracking, however the usage in engineeringindustry is still limited. This paper presents a case study for the use of eye tracking in a testingstation for electrical circuit breakers. The case study aims to evaluate the measurement and analysispossible with the Tobii wearable eye tracking system. From the case study, possibilities, limitationsand considerations for eye tracking in industrial settings are identified and discussed. The paperconcludes that while eye tracking can be used to effectively capture and visualize insightfulinformation, it faces major challenges related to subjectivity in analysis and labour intensiveness. KW - Eye Tracking Y1 - 2019 SN - 978-0-7972-1779-9 SP - 390 EP - 396 PB - Department of Industrial Engineering, Stellenbosch University CY - Stellenbosch ER - TY - CHAP A1 - Beckers, Sebastian A1 - Pawlik, Julian A1 - Kiel, Jürgen A1 - Grote, Wolfgang T1 - Simulation von Partikelflugbahnen zur Auslegungshilfe von elektrostatischen Luftfiltern T2 - Tagungsband: ASIM Workshop 2019 - Simulation Technischer Systeme Grundlagen und Methoden in Modellbildung und Simulation, 21.-22. Februar 2019, Braunschweig Y1 - 2019 SN - 978-3-901608-06-3 U6 - https://doi.org/10.11128/arep.57 SP - 147 EP - 152 PB - ARGESIM, ASIM CY - Wien ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Benim, Ali Cemal A1 - Chattopadhyay, Himadri A1 - Banerjee, Arnab T1 - Experimental investigation of heat transfer performance of corrugated tube with spring tape inserts JF - Experimental Heat Transfer Y1 - 2019 U6 - https://doi.org/10.1080/08916152.2018.1531955 SN - 0891-6152 VL - 32 IS - 5 SP - 411 EP - 425 PB - Taylor & Francis ER - TY - GEN A1 - Adam, Mario A1 - Gottschald, Jonas T1 - Kempen wird zum Reallabor T2 - Stadt + Werk: Energiepolitik, Klimaschutz, Rekommunalisierung KW - BestHeatNet Y1 - 2019 SN - 2193-195X VL - 9 IS - 7/8 SP - 22 EP - 23 PB - K21 Media AG ER - TY - CHAP A1 - Lippel, Jens A1 - Becker, Martin A1 - Zielke, Thomas ED - Obaidat, Mohammad S. ED - Ören, Tuncer ED - Szczerbicka, Helena T1 - Modeling Dynamic Processes with Deep Neural Networks: A Case Study with a Gas-fired Absorption Heat Pump T2 - SIMULTECH 2019: Proceedings of the 9th International Conference on Simulation and Modeling Methodologies, Technologies and Applications : Prague, Czech RepublicJuly 29-31, 2019 Y1 - 2019 SN - 978-989-758-381-0 U6 - https://doi.org/10.5220/0007932903170326 SP - 317 EP - 326 PB - INSTICC ER - TY - CHAP A1 - Becker, Martin A1 - Lippel, Jens A1 - Zielke, Thomas T1 - Gradient Descent Analysis: On Visualizing the Training of Deep Neural Networks T2 - VISIGRAPP 2019: Proceedings of the 14th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications : Prague, Czech Republic, February 25-27, 2019 Y1 - 2019 SN - 978-989-758-354-4 U6 - https://doi.org/10.5220/0007583403380345 VL - Volume: 3 SP - 338 EP - 345 PB - INSTICC ER - TY - JOUR A1 - Nebel, Janine A1 - Schmidt, Stefan A1 - Pan, Qiushi A1 - Lotz, Katrin A1 - Kaluza, Stefan A1 - Muhler, Martin T1 - On the role of cobalt carbidization in higher alcohol synthesis over hydrotalcite-based Co-Cu catalysts JF - Chinese Journal of Catalysis Y1 - 2019 U6 - https://doi.org/10.1016/S1872-2067(19)63344-9 SN - 1872-2067 N1 - The research project is funded by the Federal Ministry of Education and Research (Bundesministerium für Bildung und Forschung, BMBF, Verbundvorhaben Carbon2Chem®, FKZ: 03EK3041). VL - 40 IS - 11 SP - 1731 EP - 1740 PB - Elsevier ER - TY - JOUR A1 - Girod, Kai A1 - Breitkreuz, Klaas A1 - Henning, Torsten A1 - Lohmann, Heiko A1 - Kaluza, Stefan A1 - Schluter, Stefan T1 - Steel Mills as Syngas Source for Methanol Synthesis: Simulation and Practical Performance Investigations JF - Chemical Engineering Transactions N2 - In the present contribution, the utilization of steel-mill gases for an industrial methanol synthesis process is described. The focus of this work is on the influence of syngas compositions derived from steel-mill gases on an industrial Cu/ZnO/Al2O3 catalyst. Elevated CO2 and H2O concentrations seem to have an irreversible impact on the activity of the catalyst. In order to obtain realistic gas composition for the catalyst tests, a process simulation of the methanol synthesis was conducted. The calculated gas compositions at the reactor inlet were applied in a practical test in order to evaluate the catalyst stability under steel mill gas conditions. No noticeable deactivation was observed. KW - DOAJ Y1 - 2019 SN - 978-88-95608-71-6 U6 - https://doi.org/10.3303/CET1974080 SN - 2283-9216 VL - 74 SP - 475 EP - 480 PB - AIDIC ER - TY - CHAP A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Reich, Marius A1 - Götzelmann, Dennis T1 - BestHeatNet – Selbstlernende Betriebsoptimierung einer hybriden Nahwärmeversorgung T2 - Der Geothermiekongress, 19.-21.11.2019, München KW - BestHeatNet Y1 - 2019 UR - https://www.der-geothermiekongress.de/fileadmin/user_upload/DGK/DGK_2019/Teilnahme/P12_Gottschald_BestHeatNet-124.pdf CY - München ER - TY - CHAP A1 - Ardelean-Baidoc, Raluca A1 - Oniga, Gabriel A1 - Niemann, Jörg A1 - Sava, Adriana A1 - Pîslă, Adrian A1 - (Keine Angabe), T1 - Change Management Aspects in Developing the International Airport “Avram Iancu” Cluj T2 - The proceedings of the 14th European Conference on Innovation and Entrepreneurship, 19-20 September 2019 Y1 - 2019 SN - 9781912764358 U6 - https://doi.org/10.34190/ECIE.19.092 PB - ACPI ER - TY - CHAP A1 - Niemann, Jörg A1 - Fussenecker, Claudia A1 - Schlösser, Martin ED - Walker, Alastair ED - O'Connor, Rory V. ED - Messnarz, Richard T1 - Eye Tracking for Quality Control in Automotive Manufacturing T2 - Systems, Software and Services Process Improvement Y1 - 2019 SN - 978-3-030-28004-8 U6 - https://doi.org/10.1007/978-3-030-28005-5_22 SP - 289 EP - 298 PB - Springer International Publishing CY - Cham ER - TY - CHAP A1 - Spiegel, Thomas A1 - Adam, Mario T1 - Lastflexibilität in Wohngebäuden für reale Stromnetze mit Transportbeschränkungen T2 - 10. Fachtagung Smart Energy and Systems, 04.-05.11.2019, Dortmund KW - Windheizung 2.0 Y1 - 2019 N1 - nur Vortrag, keine Veröffentlichung im Tagungsband CY - Dortmund ER - TY - JOUR A1 - Biedermann, Till M. A1 - Reich, Marius A1 - Kameier, Frank A1 - Adam, Mario T1 - Assessment of statistical sampling methods and approximation models applied to aeroacoustic and vibroacoustic problems JF - Advances in Aircraft and Spacecraft Science KW - artificial neural networks KW - design of experiments KW - Latin hypercube sampling KW - aeroacoustics KW - aerodynamics KW - spectral analysis Y1 - 2019 UR - http://www.techno-press.org/content/?page=article&journal=aas&volume=6&num=6&ordernum=7 U6 - https://doi.org/10.12989/aas.2019.6.6.531 SN - 2287-528X VL - 6 IS - 6 SP - 529 EP - 550 PB - Techno Press ER - TY - JOUR A1 - Deckert, Carsten A1 - Schomaker, Rahel M. T1 - Kultur und Innovation – Wie sich kulturelle Faktoren auf die nationale Innovationsfähigkeit auswirken JF - Der Betriebswirt KW - Innovation Y1 - 2019 U6 - https://doi.org/10.3790/dbw.60.2.18 SN - 2628-7846 VL - 60 IS - 2 SP - 18 EP - 23 PB - Duncker & Humblot ER - TY - JOUR A1 - Pfeiffelmann, Björn A1 - Benim, Ali Cemal A1 - Joos, Franz T1 - A Finite Volume Analysis of Thermoelectric Generators JF - Heat Transfer Engineering Y1 - 2019 U6 - https://doi.org/10.1080/01457632.2018.1474588 SN - 0145-7632 SN - 1521-0537 VL - 40 IS - 17-18 SP - 1442 EP - 1450 PB - Taylor & Francis ER - TY - JOUR A1 - Guo, Y. A1 - Do, H. A1 - Ruess, Martin T1 - Isogeometric stability analysis of thin shells: From simple geometries to engineering models JF - International Journal for Numerical Methods in Engineering Y1 - 2019 U6 - https://doi.org/10.1002/nme.6020 SN - 1097-0207 VL - 118 IS - 8 SP - 433 EP - 458 PB - Wiley ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn A1 - Ocłoń, Paweł A1 - Taler, Jan T1 - Computational investigation of a lifted hydrogen flame with LES and FGM JF - Energy Y1 - 2019 U6 - https://doi.org/10.1016/j.energy.2019.02.133 SN - 0360-5442 VL - 173 SP - 1172 EP - 1181 PB - Elsevier ER - TY - JOUR A1 - Biedermann, Till M. A1 - Czeckay, Pasquale A1 - Geyer, Thomas F. A1 - Kameier, Frank A1 - Paschereit, Christian O. T1 - Effect of Inflow Conditions on the Noise Reduction Through Leading Edge Serrations JF - AIAA Journal Y1 - 2019 U6 - https://doi.org/10.2514/1.j057831 SN - 1533-385X VL - 57 IS - 9 SP - 4104 EP - 4109 PB - ARC ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Gobinda Das, Sampad A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal A1 - Moghimi, M. A. T1 - Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Microchannel under Pulsating Inlet Flow Condition JF - E3S Web of Conferences Y1 - 2019 U6 - https://doi.org/10.1051/e3sconf/201912801011 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Biedermann, Till M. A1 - Kameier, F. A1 - Paschereit, C. O. T1 - Successive Aeroacoustic Transfer of Leading Edge Serrations From Single Airfoil to Low-Pressure Fan Application JF - Journal of Engineering for Gas Turbines and Power KW - ISAVE Y1 - 2019 U6 - https://doi.org/10.1115/1.4044362 VL - 141 IS - 10 PB - ASME ER - TY - JOUR A1 - Deckert, Carsten A1 - Schomaker, Rahel M. T1 - Cultural Impacts on National Innovativeness: Not Every Cultural Dimension Is Equal JF - Cross-Cultural Research Y1 - 2019 U6 - https://doi.org/10.1177/1069397118799700 VL - 53 IS - 2 SP - 186 EP - 214 PB - sage journals ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Guin, Anindya A1 - Benim, Ali Cemal T1 - Investigation of Inclined Turbulators for Heat Transfer Enhancement in a Solar Air Heater JF - Heat Transfer Engineering Y1 - 2019 U6 - https://doi.org/10.1080/01457632.2018.1474593 VL - 40 IS - 17/18 SP - 1451 EP - 1460 PB - Taylor & Francis ER - TY - JOUR A1 - Deckert, Carsten T1 - Spannungsfelder der Teamkreativität: Wie Teamklima und -kontext zur Kreativität beitragen JF - Ideen und Innovationsmanagement N2 - Dieser Beitrag untersucht die Spannungsfelder der Teamkreativität. Die Spannungsfelder basieren auf einer grundlegenden Spannung aus Originalität und Effektivität, die der Standarddefinition der Kreativität zugrunde liegt. Es lassen sich auf Basis des Teamklimas und -kontextes Spannungsfelder hinsichtlich Konformität, Konsens und Kohäsion identifizieren. Mit Bezug zur Konformität müssen Teams ein positives Spannungsfeld aus der Unterstützung für Innovation und Aufgabenorientierung erreichen, um gleichzeitig Experimentierfreude zu fördern und hohe Qualitätsansprüche zu erzielen. Konsens entsteht im Spannungsfeld aus konstruktivem Konflikt und partizipatorischer Entscheidungsfindung. Bei der Kohäsion besteht eine Spannung zwischen der Teamidentität (Geborgenheit) und den individuellen Identitäten der Teammitglieder (Diversität). Der Beitrag beschreibt, wie diese drei Spannungsfelder zusammenarbeiten, wenn außergewöhnliche Kreativität in Teams entsteht. KW - Teamwork KW - Teamkreativität Y1 - 2019 SN - 2198-3143 IS - 4 SP - 116 EP - 120 ER - TY - CHAP A1 - Neef, Matthias A1 - André, Baier T1 - Blue Engineering: Ingenieur_innen mit ökologischer und sozialer Verantwortung - ein Studierenden-getriebenes, modulares Seminar-Konzept T2 - DGHD-Jahrestagung KW - Poster Y1 - 2019 UR - https://www.researchgate.net/publication/331327194_Blue_Engineering_Ingenieur_innen_mit_okologischer_und_sozialer_Verantwortung_-_ein_Studierenden-getriebenes_modulares_Seminar-Konzept PB - Universität Leipzig CY - Leipzig ER - TY - CHAP A1 - Rödder, Maximilian A1 - Spiegel, Thomas A1 - Frank, Lena A1 - Neef, Matthias A1 - Adam, Mario ED - Großmann, Uwe ED - Kunold, Ingo T1 - Integration eines multifunktionalen Wärmepumpensystems als Hardware-in-the-Loop in ein Niederspannungsnetzmodell T2 - Smart Energy and Systems 2019: Digitalisierung - Anwendungen in Technik und Industriegesellschaft, 10. Fachtagung, 04.-05.11.2019, Dortmund KW - energiBUS4home Y1 - 2019 SP - 70 EP - 77 PB - vwh Verlag Werner Hülsbusch Fachverlag für Medientechnik und -wirtschaft CY - Glückstadt ER - TY - CHAP A1 - Laux, Christoph A1 - Gotter, Andreas A1 - Neef, Matthias T1 - Experimental investigation of a low pressure steam Rankine cycle for waste heat utilization of internal combustion engines T2 - Proceedings of the 5th International Seminar on ORC Power Systems N2 - High heat losses via exhaust gas and coolant in internal combustion engines (ICE) are the basis for numerous investigations regarding downstream processes for power generation. The most promising concepts are Organic Rankine Cycles (ORC) and Steam Rankine Cycles (SRC). In previous work of the Center of Innovative Energy Systems, Düsseldorf (Germany), the technical and economic feasibility of a low pressure SRC has been investigated and the advantages in comparison to organic Rankine cycles are highlighted. A distinctive feature of the cycle is the use of the ICE coolant heat for evaporation, which limits the cycles maximum steam pressure to values below atmospheric pressure. This work presents first results of a test rig with data reconciliation according to DIN 2048 to validate the simulation results and design calculations. As a basis for the experimental investigations, a gas fired CHP plant was selected. The design of the test rig is optimized for the operation in the laboratory, where the coolant heat is emulated by a tempering device and the exhaust heat of the CHP plant is emulated by a gas burner. With the designed test rig, it is possible to control the volume flow and the temperatures of the coolant and exhaust gas, so that different load conditions of the gas fired CHP plant can be investigated. For initial tests, the turbine in the SRC is replaced by a throttle to achieve the pressure drop of the turbine. The experimental results show, that the exhaust and coolant heat of a 36 kWel CHP plant can be emulated and the performance expectations of the cycle can be met in stable steady-state conditions. Based on the measurement results and the turbine design calculations an electric power output of the cycle of 3.8 kW will be possible, which results in a cycle efficiency of about 6.5 % and an increase of the electrical power output of the CHP plant of about 10 %. The results show that the plant concept is technically feasible and, with further optimization, also represents an alternative to ORC plants in terms of increasing the efficiency of a cogeneration plant. Y1 - 2019 SN - 978-90-9032038-0 PB - The National Technical University of Athens (NTUA) CY - Athens ER - TY - JOUR A1 - Baier, André A1 - Neef, Matthias T1 - Studierende lehren und lernen sozial-ökologische Verantwortung JF - Die Neue Hochschule KW - Verantwortung Y1 - 2019 VL - 60 IS - 5 SP - 8 EP - 11 ER - TY - THES A1 - Biedermann, Till M. T1 - Aeroacoustic transfer of leading edge serrations from single aerofoils to low-pressure fan applications T1 - Strömungsakustischer Transfer von Leading Edge Serrations an einzelnen Tragflügeln hin zu Niederdruck-Axialventilatoren N2 - Leading edge serrations are well-known for their aeroacoustic potential in reducing aerofoil-turbulence interaction noise and are also associated with certain aerodynamic advantages. To prepare leading edge serrations for industrial application, two obstacles remain to be addressed. First is a combined analysis of the aeroacoustic and the aerodynamic performance of leading edge serrations to develop optimum designs. Second is the need to examine the transferability of the known effects of leading edge serrations from a single aerofoil to full rotors, which are considered to be the final area of application. This thesis aims to assist in the transfer of a well-investigated aerofoil with serrated leading edges from the rigid to the rotating domain. With this purpose, a single aerofoil type is selected and thoroughly analysed, experimentally and numerically, to generate a reliable data basis for aerodynamic performance and noise reduction capability. Aside from gathering information on the overall performance, the spatial distribution of the noise sources is localised, and the spectral composition of the noise reduction is found to follow a clearly defined scaling law. Aerodynamically, generated vortices are found to be responsible for a complex three-dimensional separation mechanism of the leading edge serrations, causing a delay of stall. The generated data basis is then used to design low-pressure axial fans of minimum complexity by keeping the initially chosen aerofoil type. The experimentally identified noise reduction mechanisms for the serrated axial fans are found to be more diverse than the single aerofoil and highly dependent on the inflow conditions and the operation point of the fan. A highly similar pattern for the spectral scaling of the noise reduction supports the finding that at optimum operation conditions, the previously identified noise reduction mechanisms for the single aerofoils are transferable to the rotating domain. On the other hand, additional aerodynamic mechanisms are found to dominate the noise reduction for the instability region of the fan, also contributing to reduced blade-to-blade interaction effects. Moreover, the blade-tip leakage flow is altered by delaying the development of coherent structures. The next step towards a more general description of the aeroacoustic and aerodynamic dependencies is developing a comprehensive model based on artificial neural networks. This model allows a combined analysis of the aerodynamic and acoustic performance of rotors with serrated leading edges and shows an accurate prediction of the overall performance and the spectral composition of the radiated noise. It also enables the development of multi-objective optima for serration designs and motivates further studies into the generalisability of the observed trends. Furthermore, the developed model represents a feasible tool to create tailored serration designs for maximum efficiency in both aeroacoustics and aerodynamics, contributing to the development of future low-noise fans and rotating machinery. N2 - Leading Edge Serrations sind hinlänglich für ihr Potential zur Reduktion von turbulenzinduziertem Schall bekannt. Ebenso können sie sich als aerodynamisch vorteilhaft erweisen. Mit dem Ziel, Leading Edge Serrations industriellen Anwendungen zugänglich zu machen, verbleiben primär noch zwei Hemmnisse. Zum einen die Notwendigkeit einer kombinierten Bewertung des aerodynamischen und des aeroakustischen Potentials mit dem Ziel der Identifikation optimaler Designansätze. Zum anderen sind Aussagen hinsichtlich der Übertragbarkeit der bekannten Schallreduktionsmechanismen von einem einzelnen Tragflügel hin zu rotierenden Strömungsmaschinen zu treffen, da letztere das finale Anwendungsgebiet von Leading Edge Serrations darstellen. Diese Arbeit zielt darauf ab, bei dem Transfer eines umfassend analysierten Tragflügeldesigns mit Leading Edge Serrations hin zu einem rotierenden System zu assistieren. Hierzu wird ein für spätere rotierende Anwendungen sinnvolles Tragflügelprofil gewählt und sowohl experimentell als auch numerisch umfassend untersucht, um eine Datenbasis des aerodynamischen und aeroakustischen Potentials zu generieren. Neben Informationen über die globalen Eigenschaften, wurde ebenfalls die räumliche Lage der Schallquellen lokalisiert. Zudem konnte der Verlauf des spektralen Schallreduktionsvermögens einer klaren Gesetzmäßigkeit zugeordnet werden. In Bezug auf die Aerodynamik wurden Wirbelstrukturen, welche sich an den Leading Edge Serrations bilden, als ursächlich für einen komplexen dreidimensionalen Ablösemechanismus identifiziert, welcher eine verzögerte Strömungsablösung bewirkt. Unter Beibehaltung des gewählten Tragflügelprofils wurde die generierte Datenbasis in einem zweiten Schritt zur Auslegung von axialen Niederdruckventilatoren niedriger Komplexität genutzt. Die hier experimentell identifizieren Schallreduktionsmechanismen sind, im Vergleich zu einem einzelnen Tragflügel, deutlich diverser und weisen eine klare Abhängigkeit vom Betriebspunkt des Ventilators sowie von den Einflussparametern auf. Unter optimalen Zuströmbedingungen kann eine klare Übertragbarkeit der Effekte vom ebenen in das rotierende System gezeigt werden. Im Gegensatz wird das Schallreduktionspotential im Instabilitätsbereich des Ventilators durch aerodynamische Strömungsphänomene dominiert, welche zudem zu einer vorteilhaften Beeinflussung von Schaufelinteraktionen beitragen. Des Weiteren wurde durch den Einsatz von Rotoren mit Leading Edge Serrations eine verzögerte Entstehung von kohärenten Strukturen im Blattspitzenbereich nachgewiesen. Um einen weiteren Schritt in Richtung einer globalen Beschreibung der erhaltenen aeroakustischen und aerodynamischen Abhängigkeiten zu gehen, wurde ein umfassendes Modell generiert, welches auf dem Training künstlicher neuronaler Netze beruht. Das generierte Modell ermöglicht eine kombinierte Prognose der aerodynamischen und aeroakustischen Performance der getesteten Prototypen und weist sowohl im Zeitbereich als auch hinsichtlich der spektralen Zusammensetzung der Signale eine hohe Prognosegüte auf. Dies ermöglicht die Definition multikriterieller Optima bezüglich des Serration Designs und motiviert weiterführende Studien hinsichtlich einer Generalisierbarkeit der beobachteten Trends. Schlussendlich ermöglicht das generierte Modell maßgeschneiderte Designansätze für eine maximale aerodynamische und aeroakustische Effizienz, was einen sinnvollen Beitrag zur zukünftigen Entwicklungen schallarmer Ventilatoren und Strömungsmaschinen darstellt. KW - aeroacoustics KW - aerodynamics KW - low-pressure axial fan KW - leading edge serrations KW - artificial neural networks KW - künstliche neuronale Netze KW - Vorderkantenzacken KW - Niederdruck-Axialventilatoren KW - Aerodynamik KW - Strömungsakustik Y1 - 2019 U6 - https://doi.org/10.14279/depositonce-9075 PB - Technische Universität Berlin CY - Berlin ER - TY - CHAP A1 - Stodick, Klaus A1 - Deckert, Carsten ED - Sucky, Eric ED - Kolke, Reinhard ED - Biethahn, Niels ED - Werner, Jan ED - Vogelsang, Michael T1 - Sustainable Parcel Delivery in Urban Areas with Micro Depots T2 - Mobility in a Globalised World 2018 KW - city logistics KW - sustainability KW - CEP services KW - micro depots Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:473-opus4-548276 SN - 978-3863096625 SP - 233 EP - 244 PB - University of Bamberg Press CY - Bamberg ER - TY - JOUR A1 - Kretschmar, Dominik A1 - Niemann, Jörg A1 - Deckert, Carsten T1 - Digitalisierungsindex zur prozessnahen Analyse mittelständischer Unternehmen JF - ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb Y1 - 2019 U6 - https://doi.org/10.3139/104.112064 SN - 0947-0085 VL - 114 IS - 4 SP - 213 EP - 218 PB - Hanser ER - TY - JOUR A1 - Deckert, Carsten A1 - Görs, Nadine T1 - Transport carbon footprint in the german courier, express and parcel industry (CEP industry) JF - Sustainability Management Forum | NachhaltigkeitsManagementForum Y1 - 2019 U6 - https://doi.org/10.1007/s00550-018-0471-1 VL - 27 IS - 1 SP - 23 EP - 30 PB - Springer ER -