TY - CHAP A1 - Grote-Ramm, Wolfgang A1 - Schönig, Felix A1 - Schwarzbözl, Peter A1 - Drexelius, Maximilian A1 - Maldonado Quinto, Daniel A1 - Binder, Matthias T1 - Model Predictive Control and Service Life Monitoring for Molten Salt Solar Power Towers T2 - 29th SolarPACES Conference, Sydney N2 - A two-component system for control and monitoring of solar power towers with molten salt receivers is proposed. The control component consists of a model predictive control applica-tion (MPC) with a flexible objective function and on-line tunable weights, which runs on a In-dustrial PC and uses a reduced order dynamic model of the receiver’s thermal and flow dy-namics. The second component consists of a service-life monitoring unit, which estimates the service-life consumption of the absorber tubes depending on the current mode of operation based on thermal stresses and creep fatigue in the high temperature regime. The calculation of stresses is done based on a detailed finite element study, in which a digital twin of the re-ceiver was developed. By parallelising the model solver, the estimation of service-life con-sumption became capable of real-time operation. The system has been implemented at a test facility in Jülich, Germany, and awaits field experiments. In this paper, the modeling and archi-tecture are presented along simulation results, which were validated on a hardware-in-the-loop test bench. The MPC showed good disturbance rejection while respecting process variable constraints during the simulation studies. KW - Solar Power Tower KW - Molten Salt KW - Model Predictive Control KW - Dynamic Modelling KW - Service-life Monitoring Y1 - 2023 N1 - Eingereichter Beitrag ER - TY - JOUR A1 - Uffmann, Kai A1 - Abicht, Claus A1 - Grote, Wolfgang A1 - Quick, Harald H. A1 - Ladd, Mark E. T1 - Design of an MR-compatible piezoelectric actuator for MR elastography JF - Concepts in Magnetic Resonance Part A: Bridging Education and Research N2 - Magnetic Resonance (MR) elastography is a method for measuring tissue elasticity via phase images acquired with an MR scanner. The propagation of periodic mechanical waves through the tissue can be captured by means of a modified phase contrast sequence. These waves are generated with a mechanical oscillator (actuator) and coupled into the tissue through the skin. The actuator must be capable of generating a sinusoidal excitation with excellent phase and amplitude stability, while not disturbing the MR imaging process. In this work, an actuator based on a piezoelectric principle was developed. Based on the imaging evaluation of several material samples, the housing for the piezoelectric ceramic was constructed of aluminum. Smaller parts of the housing were manufactured from brass and titanium to fulfill the mechanical constraints. A lever was used to transfer the oscillation generated by the piezoelectric ceramic to the point of excitation. The lever amplifies the piezoelectric motion, allowing for a more compact design. Three different lever designs were characterized by an acceleration sensor both outside and inside the magnet. It was shown that the rigidity of the lever, as determined by its material and form, was decisive in determining the resonant frequency of the system and therefore the maximum practical frequency of operation. It was also shown that the motion of the oscillator is unaffected by the electromagnetic fields of the MR imager. The final design can be placed directly in the magnet bore within a few centimeters of the tissue volume to be imaged without generating significant artifacts. An amplitude range of 0–1 mm in the frequency range from 0 to over 300 Hz was achieved, sufficient for performing most MR elastography applications. © 2002 Wiley Periodicals, Inc. Concepts in Magnetic Resonance (Magn Reson Engineering) 15: 239–254, 2002 KW - Elasticity KW - Elastography KW - Actuator KW - MRI KW - Piezoelectric Y1 - 2002 UR - 1552-5023 U6 - https://doi.org/https://doi.org/10.1002/cmr.10045 VL - 15 IS - 4 SP - 239 EP - 254 PB - Wiley ER - TY - JOUR A1 - Galban, Craig A1 - Maderwald, Stefan A1 - Herrmann, Burkhard A1 - Brauck, K. A1 - Grote, Wolfgang A1 - de Greiff, A. A1 - Uffmann, K. A1 - Ladd, M. T1 - Measuring Skeletal Muscle Elasticity in Patients with Hypogonadism by MR Elastography JF - Proc. Intl. Soc. Mag. Reson. Med. N2 - Men afflicted with hypogonadism have reduced fat-free mass and in some cases a loss in muscle strength. We hypothesize that muscle elasticity of the lower extremities differs between patients with hypogonadism and healthy controls. The shear modulus of the soleus muscle was measured non-invasively using MR elastography (MRE) at 0%, 5%, 10%, 15%, and 20% of the subject’s maximum applied force. The results from this study showed statistical differences between the patients and controls, even though there were no statistical differences in applied force. Y1 - 2005 UR - https://cds.ismrm.org/protected/05MProceedings/PDFfiles/02016.pdf VL - 13 SP - 2016 ER - TY - JOUR A1 - Galban, Craig A1 - Maderwald, Stefan A1 - Eggebrecht, Holger A1 - Grote, Wolfgang A1 - de Greiff, A. A1 - Uffmann, K. A1 - Ladd, M. E. T1 - Monitoring the Effects of Chronic Obstructive Pulmonary Disease on Muscle Elasticity by MR Elastography JF - Proc. Intl. Soc. Mag. Reson. Med. N2 - Men afflicted with chronic obstructive pulmonary disease (COPD) show signs of muscle dysfunction, such as increased muscle fatigue and acidosis during exercise. We hypothesize that muscle elasticity of the lower extremities differs between patients with COPD and age-related controls. The shear modulus of the soleus muscle was measured non-invasively using MR elastography (MRE) at 0%, 5%, 10%, 15%, and 20% of the subject’s maximum applied force. The results from this study showed statistical differences between the patients and controls, even though there were no statistical differences in the maximum applied force. Y1 - 2005 UR - https://cds.ismrm.org/protected/05MProceedings/PDFfiles/02015.pdf VL - 13 SP - 2015 ER - TY - JOUR A1 - Beyer, Marc-André A1 - Grote, Wolfgang A1 - Reinig, Gunter T1 - Adaptive exact linearization control of batch polymerization reactors using a Sigma-Point Kalman Filter JF - Journal of Process Control N2 - The Chylla–Haase polymerization reactor is widely accepted as a benchmark process for the evaluation of control strategies for batch reactors. In this contribution a control concept based on Exact I/O-Linearization is proposed and compared to a conventional cascade control structure. In order to adapt the exact linearization control strategy to various polymerization products and batch conditions, an advanced probabilistic inference algorithm (Sigma-Point Kalman Filter) is applied and investigated. Sigma-Point Kalman Filters have the major improvement of simplified implementation compared to local linearization methods (i.e. Extended Kalman Filter) because no analytical Jacobians are required. Stochastic simulation studies are introduced and show the effectiveness, accuracy and benefit of the control concept. Within several scenarios a satisfying robustness against structural errors in the underlying model equations for the nonlinear control law and the inference algorithm is demonstrated. Furthermore it is pointed out, that with little effort in reassembling the plant design, control performance can be improved significantly. KW - Batch process operation KW - Exact I/O-Linearization control KW - Online parameter estimation KW - Sigma-Point Kalman Filter Y1 - 2008 UR - 1873-2771 U6 - https://doi.org/10.1016/j.jprocont.2007.12.002 VL - 18 IS - 7-8 SP - 663 EP - 675 PB - Elsevier ER - TY - THES A1 - Grote, Wolfgang T1 - Ein Beitrag zur modellbasierten Regelung von Entnahmedampfturbinen KW - Dynamische Modellierung KW - Dampfturbine KW - Prädiktive Regelung KW - Dampfkraftwerk Y1 - 2009 UR - https://hss-opus.ub.ruhr-uni-bochum.de/opus4/2109 PB - Bochum ER - TY - CHAP A1 - Grote, Wolfgang A1 - Schulze Darup, M. A1 - Reinig, G. T1 - Modellprädiktive Regelung von Entnahmeturbinen und Dampfnetzen (Poster) T2 - Chemie Ingenieur Technik Y1 - 2009 U6 - https://doi.org/10.1002/cite.200950184 VL - 2009 IS - 8 SP - 1113 EP - 1114 PB - Wiley CY - Weinheim ER - TY - CHAP A1 - Grote, Wolfgang A1 - Reinig, Gunter T1 - Modellbasierte Regelung von Entnahmedampfturbinen (eingeladener Vortrag) T2 - 43. Regelungstechnisches Kolloquium in Boppard vom 25.-27. Februar 2009 KW - Modellierung von Dampfturbinen KW - Modellprädiktive Regelung KW - Generische Modelle KW - MIMO Regelung KW - Betriebsartenspezifische Regelung Y1 - 2009 UR - https://www.iosb.fraunhofer.de/content/dam/iosb/iosbtest/documents/veranstaltungen/boppard-regelungstechnisches-kolloquium/Programm_2009.pdf ER - TY - CHAP A1 - Grote, Wolfgang A1 - Kastsian, Darya A1 - Mönnigmann, Martin T1 - Optimal power system unit commitment with guaranteed local stability T2 - Proceedings of the 2011 American Control Conference N2 - This article deals with the cost optimal commitment of power systems. System stability is often only considered after solving the commitment problem. We show by example that a cost optimization may result in a mode of operation that, while economically optimal, is unstable or has otherwise unacceptable dynamics. As a remedy, we propose to use the so-called normal vector method, which has been developed for the optimization of nonlinear dynamical systems with stability boundaries and uncertain parameters. We apply the method to a small sample power grid, where the optimization goal is to minimize the energy production costs for a given power consumption. KW - Optimization KW - Power system stability KW - Robustness Y1 - 2011 U6 - https://doi.org/10.1109/ACC.2011.5991058 SN - 2378-5861 SP - 4526 EP - 4531 PB - IEEE ER - TY - CHAP A1 - Nielsen, L. A1 - Leithner, R. A1 - Qi, D. A1 - Grote, Wolfgang A1 - Kastsian, Darya A1 - Mönnigmann, Martin T1 - Isobares GuD - Druckluftspeicherkraftwerk mit Wärmespeicher T2 - Energy Storage Conference and Exhibition (IRES 2011), Berlin. 2011 Y1 - 2011 N1 - Veröffentlichung als Poster CY - Berlin ER - TY - JOUR A1 - Grote, Wolfgang A1 - Kastsian, Darya A1 - Mönnigmann, Martin T1 - Guaranteed stability in optimal power generation dispatching under uncertainty JF - IEEE Transactions on Power Systems N2 - Stability and cost optimality of power generation and supply systems must not be considered independently from one another. Simple examples show that optimizing cost without considering stability may result in modes of operation that, while economically optimal, are unstable. We demonstrate that stability, robustness, and optimality can be considered systematically and simultaneously by combining bifurcation theory and nonlinear optimization. Essentially, the proposed method enforces a backoff distance between the optimal point of operation and operational or stability boundaries in the space of the optimization variables, where bifurcation theory is used to describe nonlinear stability boundaries. KW - Normal vector method KW - Power dispatch KW - Robust optimization KW - Stability KW - Unit commitment Y1 - 2013 U6 - https://doi.org/10.1109/TPWRS.2012.2207970 SN - 1558-0679 VL - 28 IS - 2 SP - 1103 EP - 1112 PB - IEEE ER - TY - JOUR A1 - Jost, Michael A1 - Grote, Wolfgang A1 - Möllenbruck, Florian A1 - Mönnigmann, Martin T1 - Plant-wide control of a parabolic trough power plant with thermal energy storage JF - IFAC Proceedings Volumes N2 - We present a control scheme for a parabolic trough power plant that is equipped with a molten salt thermal energy storage system. We show that the multivariable control problem for the solar field can be decoupled by controlling the three way valve that splits the heat transfer fluid between the storage system and the steam generator. The steam generation cycle is regulated with inlet pressure control. The subsystems of the plant are modeled based on first principles, where we focus on the steam generation cycle. A multi-group extraction turbine with pre- and reheater is considered, which is suitable for solar power plants. We demonstrate the benefits of the proposed control scheme with a day-to-day simulation. KW - Control of power plants KW - Solar power plants KW - Thermal energy storage KW - Decoupling control Y1 - 2014 U6 - https://doi.org/10.3182/20140824-6-ZA-1003.00879 SN - 2589-3653 VL - 47 IS - 3 SP - 419 EP - 425 PB - Elsevier ER - TY - JOUR A1 - Mier, Dominik A1 - Möllenbruck, Florian A1 - Jost, Michael A1 - Grote, Wolfgang A1 - Mönnigmann, Martin T1 - Model predictive control of the steam cycle in a solar power plant JF - IFAC-PapersOnLine N2 - We derive a nonlinear model of the steam cycle of a solar power plant, estimate its unknown parameters with measured data, and design a linear model predictive controller based on the resulting model. Simulations show that the linear model predictive controller is able to regulate the electrical power of the nonlinear steam process of the plant to a given reference trajectory very well. Moreover, it results in very good disturbance rejection. KW - Power plant control KW - solar power KW - model predictive control Y1 - 2015 U6 - https://doi.org/10.1016/j.ifacol.2015.09.052 SN - 2405-8963 VL - 48 IS - 8 SP - 710 EP - 715 PB - Elsevier ER - TY - CHAP A1 - Schramm, Alexander A1 - Kruger, Karl A1 - Niemann, Jörg A1 - Grote, Wolfgang ED - Dimitrov, Dimiter ED - Hagedorn-Hansen, Devon ED - Leipzig, Karl von T1 - Possibilities, Limitations and Considerations for Eye Tracking in Industrial Environments: Experience from a Case Study T2 - International Conference on Competitive Manufacturing (COMA 19) proceedings : 30 January 2019-1 February 2019, Stellenbosch, South Africa N2 - Eye tracking is a measurement technique for determining the orientation and viewing direction of an individual’s eyes. It allows for an evaluation of the individual’s gaze and other related information.There is a wide variety of application areas for eye tracking, however the usage in engineeringindustry is still limited. This paper presents a case study for the use of eye tracking in a testingstation for electrical circuit breakers. The case study aims to evaluate the measurement and analysispossible with the Tobii wearable eye tracking system. From the case study, possibilities, limitationsand considerations for eye tracking in industrial settings are identified and discussed. The paperconcludes that while eye tracking can be used to effectively capture and visualize insightfulinformation, it faces major challenges related to subjectivity in analysis and labour intensiveness. KW - Eye Tracking Y1 - 2019 SN - 978-0-7972-1779-9 SP - 390 EP - 396 PB - Department of Industrial Engineering, Stellenbosch University CY - Stellenbosch ER - TY - CHAP A1 - Beckers, Sebastian A1 - Pawlik, Julian A1 - Kiel, Jürgen A1 - Grote, Wolfgang T1 - Simulation von Partikelflugbahnen zur Auslegungshilfe von elektrostatischen Luftfiltern T2 - Tagungsband: ASIM Workshop 2019 - Simulation Technischer Systeme Grundlagen und Methoden in Modellbildung und Simulation, 21.-22. Februar 2019, Braunschweig Y1 - 2019 SN - 978-3-901608-06-3 U6 - https://doi.org/10.11128/arep.57 SP - 147 EP - 152 PB - ARGESIM, ASIM CY - Wien ER - TY - CHAP A1 - Grote-Ramm, Wolfgang A1 - Schönig, Felix T1 - Model Predictive Control of Solar Receivers T2 - 25th Cologne Solar Colloquium (DLR) Y1 - 2022 UR - https://www.dlr.de/sf/PortalData/73/Resources/dokumente/soko/soko2022/DLR_Solar_Colloquium_2022_Model_Predictive_Control_GROTE-RAMM.pdf ER - TY - JOUR A1 - Grote-Ramm, Wolfgang A1 - Lanuschny, David A1 - Lorenzen, Finn A1 - Oliveira Brito, Marcel A1 - Schönig, Felix T1 - Continual learning for neural regression networks to cope with concept drift in industrial processes using convex optimisation JF - Engineering Applications of Artificial Intelligence N2 - Process models in industrial applications, e.g. predictive maintenance or automation, are subject to both divergence from the underlying system due to their time-variant nature and to high complexity resulting from a wide operational range being covered. Hence, regression models require high accuracy for the present system state and at the same time need to be valid across the whole system operating space. While accuracy for the current system state can be gained by updating the model on the current data, the overall validity must often be retrieved from historical or design data. We propose a method to find an appropriate compromise for these two demands. A pre-trained artificial neural network (ANN) is continually updated on the current sensor data stream using convex optimisation. Thus, a unique and optimal solution is generated in each update step, while robust regression accuracy on the domain that is not covered by the arriving data subset is maintained. This is achieved by introducing a data management system to provide some historical data, constraining the optimisation problem and manipulating the architecture of the ANN. Models updated with this method show reasonable stability but display plastic behaviour at the current operating point. KW - Continual learning KW - Concept drift KW - Catastrophic forgetting KW - Convex optimization Y1 - 2023 U6 - https://doi.org/10.1016/j.engappai.2023.105927 SN - 1873-6769 VL - 120 PB - Elsevier CY - New York ER - TY - CHAP A1 - Lorenzen, Finn A1 - Schönig, Felix A1 - Grote-Ramm, Wolfgang A1 - Oliveira Brito, Marcel A1 - Neuberger, Heiko A1 - Sobolyev, Alexander T1 - Continual Adaptation of Compressor Maps During Operation on Measurement Data For Increased Performance of Model-Based Applications in Turbomachinery T2 - ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition, June 26–30, 2023 Boston, Massachusetts, USA N2 - Higher control engineering concepts, including artificial intelligence and model-based control, are recently becoming more popular in complex industrial applications because they enable a significant increase in efficiency. E.g., a model-based approach can be used to enhance the control and monitoring of several coupled components of a larger turbomachinery train. This requires dynamic models of the components, including all machine characteristics, which may experience a shift in their behavior over the course of their lifetime. Such changes occur due to natural fouling, wear of sub-components or external effects induced by maintenance measures. To overcome this problem, we model machine-characteristic maps with artificial neural networks, which may be used as part of prediction models in a model predictive control unit. If an appropriate data set is available, this allows us to adapt the model to the current behavior of the machine without requiring in-depth knowledge about the underlying physics of this “concept drift”, as it is known in literature. However, the training of neural networks is usually connected with high computational effort while the task needs to be executed in real-time during operation. Furthermore, in real operating conditions, machine sensors can only provide labeled data from the current operating point of the machine, which can be stationary for long operation periods of up to several months. In general, this yields only an unrepresentative data subset of the machine-characteristics, which is not sufficient to retrain the whole model to a new state. To solve these problems, we firstly reduce the model adaptation to a convex optimization problem, which can be efficiently solved in real-time conditions. Secondly, we use a specialized data management system with which we can integrate historical data to supplement the unrepresentative data subset. In this paper we show the application of the outlined method on a compressor map and discuss the advantages and requirements of the method in the context of modeling applications for industrial turbomachinery. KW - compressors KW - Intelligent control KW - Neural networks KW - Modeling Y1 - 2023 SN - 978-0-7918-8697-7 U6 - https://doi.org/10.1115/GT2023-103458 VL - Volume 4 SP - 1 EP - 7 PB - ASME CY - Boston ER - TY - GEN A1 - Musall, Eike ED - Laible, Johannes T1 - Suffizienz als Ausweg?! T2 - Klimafreundlich bauen, 2024: Magazin für Passivhaus & Co KW - Suffizienz KW - Wohnfläche KW - klimaneutrale Gebäude KW - MIMO KW - Solar Decathlon Y1 - 2024 SN - 978-3-944549-51-4 VL - 19 IS - 2024 SP - 30 EP - 33 PB - Laible Verlagsprojekte ER - TY - JOUR A1 - Molloy, Dara A1 - Müller, Patrick A1 - Deegan, Brian A1 - Mullins, Darragh A1 - Horgan, Jonathan A1 - Ward, Enda A1 - Jones, Edward A1 - Braun, Alexander A1 - Glavin, Martin T1 - Analysis of the Impact of Lens Blur on Safety-Critical Automotive Object Detection JF - IEEE Access N2 - Camera-based object detection is widely used in safety-critical applications such as advanced driver assistance systems (ADAS) and autonomous vehicle research. Road infrastructure has been designed for human vision, so computer vision, with RGB cameras, is a vital source of semantic information from the environment. Sensors, such as LIDAR and RADAR, are also often utilized for these applications; however, cameras provide a higher spatial resolution and color information. The spatial frequency response (SFR), or sharpness of a camera, utilized in object detection systems must be sufficient to allow a detection algorithm to localize objects in the environment over its lifetime reliably. This study explores the relationship between object detection performance and SFR. Six state-of-the-art object detection models are evaluated with varying levels of lens defocus. A novel raw image dataset is created and utilized, containing pedestrians and cars over a range of distances up to 100-m from the sensor. Object detection performance for each defocused dataset is analyzed over a range of distances to determine the minimum SFR necessary in each case. Results show that the relationship between object detection performance and lens blur is much more complex than previous studies have found due to lens field curvature, chromatic aberration, and astigmatisms. We have found that smaller objects are disproportionately impacted by lens blur, and different object detection models have differing levels of robustness to lens blur KW - DOAJ KW - Object detection KW - intelligent transportation system KW - autonomous vehicles KW - ADAS KW - lens blur Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-42999 SN - 2169-3536 VL - 12 SP - 3554 EP - 3569 PB - IEEE ER - TY - RPRT A1 - Rehm, Lukas A1 - Loschen, Rebekka A1 - Letzner, Sara T1 - Publikationen in der Forschungsevaluation - Eine Handreichung für Wissenschaftsmanager*innen N2 - Sollen Forschungsleistungen gemessen und bewertet werden, stellen Publikationen eines der wichtigsten Kriterien dar. Die Bibliometrie liefert eine Vielzahl von (absoluten, relativen, normalisierten) Indikatoren, die Wissenschaftsmanager*innen für Leistungsträgeranalysen oder Forschungsevaluationen heranziehen können. Um valide Aussagen über wissenschaftliche Leistungen vornehmen zu können, müssen bibliometrische Kennzahlen mit anderen Leistungskriterien in Bezug gesetzt werden und es sind viele Faktoren sowie Umstände zu berücksichtigen. Auf diese wird in der vorliegenden Handreichung eingegangen. Sie sollen Wissenschaftsmanager*innen das Rüstzeug an die Hand geben, um bibliometrische Untersuchungen und deren Ergebnisse in dem jeweiligen Untersuchungsfall zielführend einordnen zu können. Y1 - 2024 U6 - https://doi.org/10.5281/zenodo.10474261 PB - Zenodo ER - TY - JOUR A1 - Geerkens, Simon A1 - Sieberichs, Christian A1 - Braun, Alexander A1 - Waschulzik, Thomas T1 - QI²: an interactive tool for data quality assurance JF - AI and Ethics N2 - The importance of high data quality is increasing with the growing impact and distribution of ML systems and big data. Also, the planned AI Act from the European commission defines challenging legal requirements for data quality especially for the market introduction of safety relevant ML systems. In this paper, we introduce a novel approach that supports the data quality assurance process of multiple data quality aspects. This approach enables the verification of quantitative data quality requirements. The concept and benefits are introduced and explained on small example data sets. How the method is applied is demonstrated on the well-known MNIST data set based an handwritten digits. KW - Performance metrics KW - HSD Publikationsfonds KW - DEAL KW - DFG Publikationskosten KW - Machine learning KW - Quality assurance KW - Data integrity KW - Data quality Y1 - 2024 U6 - https://doi.org/10.1007/s43681-023-00390-6 SN - 2730-5961 N1 - Funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) - 532148125 and supported by the central publication fund of Hochschule Düsseldorf University of Applied Sciences Data availability declaration: The data that support the findings of this scientific publication are available from the corresponding author upon reasonable request. PB - Springer Nature ER - TY - THES A1 - Söhnitz, Stefanie T1 - Entwicklung eines prototypischen digitalen Workflows, der einen qualitätsgesicherten Publikationsprozess auf Basis von definierten Qualitätskriterien für Publikationen nachweist N2 - Hintergrund: Durch die Digitalisierung hat sich die Art des Publizierens verändert. Es ergeben sich neue Publikationswege und -formen. Eine Reflexion der traditionellen Ansichten über Publikationen und die Sicherung der Qualität ist erforderlich. Damit ergibt sich die Intension der Arbeit: Gegenwärtige Qualitätskriterien zu erfassen, zu analysieren und neuartige Möglichkeiten aufzuzeigen. Methoden: Die theoretische Basis für den Stand der Forschung erfolgt durch eine repräsentative Literaturrecherche. Die Extraktion der Qualitätskriterien basiert auf einer selektiven Quellenauswahl. Ergänzend werden sechs Expert:innen anhand eines halbstrukturiertem Interviewleitfadens befragt. Die extrahierten Erkenntnisse aus der Analyse fließen in einen Wissensgraph und liefern Ansätze für eine Qualitätssicherung. Die Modellierung einer Anwendung wird auf Basis des Standards BPMN 2.0 umgesetzt. Ergebnisse: Es wird ein Qualitätskriterien-Index erstellt, der zur Ausweisung von Qualitätsmerkmalen für Publikationen führt. Diese bilden die Wissensbasis für eine Web-Anwendung. Der darin enthaltene prototypische Workflow leitet die:den Autor:in durch Kriterien. Als Ergebnis werden die Publikationen mit Qualitätsmerkmalen angereichert. Diese Arbeit liefert das theoretische Konzept für die Anwendung. Es beinhaltet ein Mockup und eine erste prototypische Umsetzung. Dies bietet die Basis für eine bedarfsorientierte, reale Entwicklung. Schlussfolgerungen: Eine reale, technische Umsetzung ist mit entsprechenden Ressourcen realisierbar. Vorab wird empfohlen, die ermittelten Qualitätskriterien mit einer Nutzer:innengruppe zu reflektieren bspw. in Form einer qualitativen Erhebung. Diese liefert Hypothesen und fördert die Akzeptanz für die Ausweisung von Qualität. Das Ergebnis behandelt keine fachdisziplin-spezifischen Aspekte. Erfolgt dies, wird es zu einer Erweiterung der Anwendung führen. Ebenfalls sollte die Usability der Anwendung getestet werden, bevor die reale Umsetzung erfolgt. Das erstellte Konzept, ein Mockup und der Prototyp liefern die Ausgangslage für die Entwicklung. KW - Qualitätssicherung KW - wissenschaftliche Literatur KW - Open Science Y1 - 2023 PB - Technische Hochschule Wildau CY - Wildau ER - TY - JOUR A1 - Sieberichs, Christian A1 - Geerkens, Simon A1 - Braun, Alexander A1 - Waschulzik, Thomas T1 - ECS: an interactive tool for data quality assurance JF - AI and Ethics N2 - With the increasing capabilities of machine learning systems and their potential use in safety-critical systems, ensuring high-quality data is becoming increasingly important. In this paper, we present a novel approach for the assurance of data quality. For this purpose, the mathematical basics are first discussed and the approach is presented using multiple examples. This results in the detection of data points with potentially harmful properties for the use in safety-critical systems. KW - DEAL KW - HSD Publikationsfonds KW - Data visulization KW - Distance based KW - Data quality assurance KW - Equivalence class sets KW - DFG Publikationskosten Y1 - 2024 U6 - https://doi.org/10.1007/s43681-023-00393-3 SN - 2730-5961 N1 - Funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) - 532148125 and supported by the central publication fund of Hochschule Düsseldorf University of Applied Sciences Data availability declaration: All data that support the findings of this scientific publication are available within this paper and/or its supplementary information files/materials. Otherwise: The data that support the findings of this scientific publication are available from the corresponding author upon reasonable request. PB - Springer Nature ER - TY - BOOK A1 - Kahlisch, Mareen T1 - Ästhetik des Chaos. Beobachtungen zur Struktur der Narration in Luigi Pirandellos 'Novelle per un anno' N2 - Der Chaos-Begriff ist für Pirandello nicht nur identitätsbestimmend, sondern wird auch mit seinem Novellenwerk in Verbindung gebracht, denn die ‚Novelle per un anno‘ scheinen sich jeder Bestimmung konkreter Ordnungsmuster zu widersetzen. Die vorliegende Studie befasst sich mit der bisher noch nicht eingehend erforschten Frage danach, welche Strukturprinzipien den ‚Novelle per un anno‘ zugrunde liegen. Über klassisch-narratologische Textanalysen ausgewählter Novellen hinaus wird eine medienhistorische Perspektive eingenommen. Dies erlaubt Aussagen über den Einfluss des jeweiligen Publikationsmediums auf die Konstitution der Texte und die Gattung Novelle sowie eine Deutung der z.T. intensiven Umschriften der Novellen. So zeigt sich, dass sich die Novellen innerhalb der Sammlung zueinander verhalten und über Themen, Motive und narrative Strukturen, aber auch über ihren medienhistorischen Kontext netzartig miteinander verbunden sind. Die Texte werden buchstäblich in die ‚Novelle per un anno‘ und damit einhergehend in eine Ästhetik des Chaos ‚eingeschrieben‘. KW - Italienische Literatur KW - Gattungsgeschichte KW - Mediengeschichte KW - Corriere della Sera KW - Ästhetik Y1 - 2023 SN - 978-3-8253-9513-1 N1 - Die Arbeit wurde zuvor als Dissertation an der Universität Klagenfurt eingereicht (2022) und für den Druck redaktionell überarbeitet. SP - 345 PB - Carl-Winter-Universitätsverlag CY - Heidelberg ET - 1. Aufl. ER - TY - BOOK A1 - Fischer, Peter C T1 - Wirtschaftsprivatrecht - Einführung in die Grundlagen und Kerngebiete des Wirtschaftsrechts N2 - Lehrbuch zum Wirtschaftsprivatrecht KW - Wirtschaftsrecht Y1 - 2023 SN - 978-3-17-042674-0 PB - Kohlhammer CY - Stuttgart ET - 2., erweiterte und aktualisierte Auflage ER - TY - PAT A1 - Lessmann, Stephanie A1 - Meuter, Mirko A1 - Mueller, Dennis T1 - Method to determine distance of an object from an automated vehicle with a monocular device N2 - A method of determining the distance of an object from an automated vehicle based on images taken by a monocular image acquiring device. The object is recognized with an object-class by means of an image processing system. Respective position data are determined from the images using a pinhole camera model based on the object-class. Position data indicating in world coordinates the position of a reference point of the object with respect to the plane of the road is used with a scaling factor of the pinhole camera model estimated by means of a Bayes estimator using the position data as observations and under the assumption that the reference point of the object is located on the plane of the road with a predefined probability. The distance of the object from the automated vehicle is calculated from the estimated scaling factor using the pinhole camera model. Y1 - 2018 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf&docid=US000009862318B2&xxxfull=1 ER - TY - PAT A1 - Haselhoff, Anselm Stephan A1 - Müller, Dennis A1 - Meuter, Mirko Nicolas A1 - Nunn, Christian Markus T1 - Verfahren zum Erzeugen eines Trainingsbildes N2 - Bei einem Verfahren zum Erzeugen eines Trainingsbilds, welches ein zu erkennendes Objekt in einer natürlichen Objektumgebung zeigt, wird das Trainingsbild als synthetisches Bild durch Kombination eines von einer Kamera aufgenommenen Basisbilds und eines Template-Bilds erzeugt, indem mittels eines Shift-Map-Algorithmus ein Strukturmerkmal aus dem Basisbild entfernt und durch ein dem Template-Bild entnommenes Strukturmerkmal ersetzt wird. Y1 - 2016 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf&docid=EP000003029628A1&xxxfull=1 ER - TY - PAT A1 - Meuter, Mirko Nicolas A1 - Nunn, Christian Markus A1 - Müller, Dennis A1 - Görmer, Steffen M. T1 - Objektverfolgungsverfahren für ein Kamerabasiertes Fahrerassistenzsystem N2 - Die Erfindung betrifft ein Objektverfolgungsverfahren für ein kamerabasiertes Fahrerassistenzsystem, welches eine in einem eigenen Fahrzeug installierte und in Fahrtrichtung ausgerichtete Kamera zur Aufnahme von Bildern einer in Fahrtrichtung vor dem eigenen Fahrzeug liegenden Fahrzeugumgebung aufweist, mit den Schritten, dass ein ein vorausfahrendes Fahrzeug darstellendes Objekt in einem von der Kamera aufgenommenen Bild detektiert wird und ein Mittelwert und eine Kovarianzmatrix für den aktuellen Zustand des vorausfahrenden Fahrzeugs mittels eines erweiterten Kalman Filters aus der Position und Breite des Objekts in dem Bild geschätzt wird. Y1 - 2013 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf&docid=EP000002562681A1&xxxfull=1 ER - TY - PAT A1 - Müller, Dennis A1 - Meuter, Mirko Nicolas A1 - Görmer, Steffen Michael A1 - Nunn, Christian Markus A1 - Gavriilidis, Alexandros T1 - Verfahren zur Erkennung von Funktionsfehlern einer Multisensoranordnung N2 - Bei einem Verfahren zur Erkennung von Funktionsfehlern eines oder mehrerer Sensoren einer der Überwachung einer Fahrzeugumgebung dienenden Multisensoranordnung (10) eines Fahrzeugassistenzsystems (12) wird auf der Basis von Informationen aus einer für eine vereinheitlichte Erfassung der aktuellen Fahrzeugumgebung durchgeführten Datenfusion der von den Sensoren der Multisensoranordnung (10) erhaltenen Daten wenigstens eine aktuelle Leistungsgröße der Multisensoranordnung (10) ermittelt. Die ermittelte aktuelle Leistungsgröße wird mit einer entsprechenden, für die fehlerfreie Multisensoranordnung (10) erwarteten Leistungsgröße verglichen. Eine Entscheidung darüber, ob ein Funktionsfehler des bzw. der betreffenden Sensoren der Multisensoranordnung (10) vorliegt oder nicht, wird in Abhängigkeit vom Ergebnis des Vergleichs der auf der Basis der Informationen aus der Sensordatenfusion ermittelten aktuellen Leistungsgröße mit der erwarteten Leistungsgröße der Multisensoranordnung (10) getroffen. Y1 - 2013 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf&docid=EP000002604478A1&xxxfull=1 ER - TY - PAT A1 - Zhao, Kun A1 - Iurgel, Uri A1 - Meuter, Mirko A1 - Müller, Dennis T1 - Verfahren zum kalibrieren einer Bilderfassungseinrichtung N2 - Bei einem Verfahren zum Kalibrieren einer Bilderfassungseinrichtung, die an einem Kraftfahrzeug angeordnet ist und in der Lage ist, nacheinander Bilder eines vor dem Kraftfahrzeug befindlichen Verkehrsraums zu erfassen, werden in einem erfassten Bild wenigstens zwei Bildobjekte detektiert, welche in Weltkoordinaten geraden und zueinander im Wesentlichen parallelen Liniensegmenten entsprechen. Anhand der Bildobjekte wird die Position eines Fluchtpunkts in dem erfassten Bild geschätzt und mittels eines Tracking-Verfahrens verfolgt. Dabei wird ein Fehler für die Position des Fluchtpunkts berechnet. Sobald der berechnete Fehler einen vorbestimmten Schwellenwert unterschreitet, wird anhand der zu dem Fehler gehörigen Position des Fluchtpunkts die Bilderfassungseinrichtung kalibriert. Y1 - 2014 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf&docid=EP000002704096A1&xxxfull=1 ER - TY - PAT A1 - Müller, Dennis A1 - Nunn, Christian Markus A1 - Meuter, Mirko Nicolas A1 - Görmer, Steffen T1 - Verfahren zur Erfassung und Bestätigung kritischer Fahrsituationen N2 - Es wird ein Verfahren zur Erfassung und Bestätigung kritischer Fahrsituationen angegeben, beidem ein insbesondere vor einem Fahrzeug befindliches Objekt mittels mehrerer unabhängiger, dem Fahrzeug zugeordneter Sensoreinheiten überwacht wird, die von den Sensoreinheiten gelieferten Signale jeweils als Sensorsignal in Form einer diskretisierten Wahrscheinlichkeitsdichtefunktion der betreffenden physikalischen Messgröße über ein definiertes Intervall [0, MAX] bereitgestellt werden, die verschiedenen Sensorsignale zu einem einzigen, ebenfalls die Form einer Wahrscheinlichkeitsdichtefunktion der betreffenden Messgröße aufweisenden Endsignal kombiniert werden und mittels eines lernenden Klassifizierers anhand des kombinierten Endsignal eine endgültige Bewertung der aktuellen Fahrsituation vorgenommen wird. Y1 - 2013 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf&docid=EP000002549294A1&xxxfull=1 ER - TY - PAT A1 - Nunn, Christian Markus A1 - Meuter, Mirko Nicolas A1 - Müller, Dennis A1 - Görmer, Steffen T1 - Verfahren zum Erkennen und Verfolgen von Fahrspurmarkierungen N2 - Bei einem Verfahren zum Erkennen und Verfolgen von Fahrspurmarkierungen von einem Kraftfahrzeug aus wird mittels einer Bilderfassungseinrichtung in regelmäßigen Zeitabständen ein Bild eines vor dem Kraftfahrzeug befindlichen Verkehrsraumes erfasst. In dem erfassten Bild werden diejenigen Bildbereiche als erkannte Fahrspurmarkierungen identifiziert, welche ein vorgegebenes Erkennungskriterium erfüllen. Wenigstens eine erkannte Fahrspurmarkierung wird als zu verfolgende Fahrspurmarkierung einem Tracking-Prozess unterzogen. Es wird für jede erkannte Fahrspurmarkierung wenigstens ein Prüfbereich im Bild definiert. Anhand von Intensitätswerten der dem Prüfbereich zugehörigen Bildpunkte wird wenigstens eine Kenngröße ermittelt. In Abhängigkeit von der Kenngröße wird die erkannte Fahrspurmarkierung einer von mehreren Fahrspurmarkierungs-Klassen zugeordnet. Y1 - 2013 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf&docid=EP000002629243A1&xxxfull=1 ER - TY - PAT A1 - Nunn, Christian Markus A1 - Meuter, Mirko Nicolas A1 - Müller, Dennis A1 - Görmer, Steffen T1 - Verfahren zur Detektion und Klassifikation von Objekten N2 - Bei einem Verfahren zur Detektion und Klassifikation von Objekten wie insbesondere Fahrbahnmarkierungen[AB_DE] ausgehend von einem Bild der Umgebung im Sichtbereich einer insbesondere einem Fahrzeug zugeordneten Bildaufnahmeeinrichtung wird für eine anfängliche Detektion von Objektkandidaten eine schnelle Hough-Transformation ausgeführt, bei der zur Bestimmung einer jeweiligen Votierstelle im Hough-Raum die Gradientenrichtung von ermittelten Kantenpunkten herangezogen wird. Zur Klassifikation der Objektkandidaten und zur Akkumulation zusätzlicher Merkmale wird als Hough-Raum ein zusätzliche Ebenen umfassender Raum verwendet. Y1 - 2013 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=pdf&docid=EP000002549408A1&xxxfull=1 ER - TY - GEN ED - Hilgers-Sekowsky, Julia ED - Richter, Nicole ED - Ermel, Nicole T1 - Nachhaltigkeit in Nonprofit-Organisationen: Transdisziplinäre Perspektiven für ein zukunftsfähiges Management KW - Nonprofit Organizations KW - Sustainability Y1 - 2023 SN - 978-3-658-40659-2 U6 - https://doi.org/10.1007/978-3-658-40659-2 SN - 2731-8834 PB - Springer Gabler CY - Wiesbaden ER - TY - THES A1 - Richter, Nicole T1 - Interne Kommunikation im Krisenmanagement Y1 - 2007 SN - 978-3-89936-584-9 VL - Personal, Organisation und Arbeitsbeziehungen, 43 PB - Lohmar CY - Köln ER - TY - GEN A1 - Richter, Nicole T1 - Interne Kommunikation im Vorfeld von Unternehmensfusionen Y1 - 2007 SN - 978-3-8364-1905-5 PB - Dr. Müller (VDM) CY - Saarbrücken ER - TY - CHAP A1 - Richter, Nicole ED - Seeger, Kerstin ED - Liman, Burkhard T1 - Unternehmensleitbilder zur Kommunikation von Zielen T2 - Zielorientierte Unternehmensführung: Festschrift für Univ.-Prof. Dr. Winfried Hamel KW - Unternehmenskultur KW - Betriebswirtschaftliches Ziel Y1 - 2008 SN - 978-3-8349-8087-8 U6 - https://doi.org/10.1007/978-3-8349-8087-8_8 SP - 199 EP - 229 PB - Gabler CY - Wiesbaden ER - TY - GEN A1 - Richter, Nicole T1 - Interne Kommunikation im Unternehmen T2 - Das Wirtschaftsstudium Y1 - 2008 SN - 0340-3084 IS - 3 SP - 328 EP - 330 PB - Lange CY - Düsseldorf ER - TY - GEN A1 - Richter, Nicole T1 - Personalmarketing T2 - Das Wirtschaftsstudium KW - Erfolgsfaktor KW - Personalwirtschaft KW - Marketing KW - Personalmarketing KW - Unternehmenspolitik Y1 - 2008 SN - 0340-3084 IS - 10 SP - 1318 EP - 1319 ER - TY - CHAP A1 - Richter, Nicole ED - Mindermann, Torsten T1 - Klausuren und Lösungen Personalwesen, Organisationstheorie und Unternehmensführung T2 - BWL-Klausuren für das Bachelor-Studium Y1 - 2010 SN - 978-3-8423-0675-2 PB - books on demand CY - Norderstedt ER - TY - GEN A1 - Richter, Nicole A1 - Kerl, Tim T1 - Nachhaltiges Recruiting von Auszubildenden T2 - Das Wirtschaftsstudium KW - Personalbeschaffung KW - Auszubildende KW - Soziales Verhalten KW - Personalwirtschaft KW - Umwelt Y1 - 2012 SN - 0340-3084 IS - 8-9 SP - 1084 EP - 1086 ER - TY - GEN A1 - Richter, Nicole T1 - Personalmarketing im Wandel T2 - Das Wirtschaftsstudium KW - Personalmarketing KW - Facharbeiter KW - Personalbeschaffung Y1 - 2014 SN - 0340-3084 IS - 1 SP - 82 EP - 86 ER - TY - GEN A1 - Richter, Nicole T1 - Internes Employer Branding und Führungskräfte T2 - Das Wirtschaftsstudium KW - Unternehmer KW - Firmenimage KW - Führungskräfte KW - Personalwirtschaft Y1 - 2016 SN - 0340-3084 IS - 11 SP - 1236 EP - 1240 ER - TY - GEN A1 - Richter, Nicole T1 - Talent Relationship Management T2 - Das Wirtschaftsstudium Y1 - 2017 IS - 8-9 SP - 926 EP - 930 PB - Lange CY - Düsseldorf ER - TY - GEN A1 - Richter, Nicole T1 - Die Klausur (Klausur zum Personalmanagement) T2 - Das Wirtschaftsstudium Y1 - 2018 SN - 0340-3084 IS - 3 SP - 307 EP - 308 ER - TY - GEN A1 - Richter, Nicole A1 - Katter, Evgenia T1 - Onboarding T2 - Das Wirtschaftsstudium KW - Personalbeschaffung KW - Mitarbeiterbindung Y1 - 2018 SN - 0340-3084 IS - 5 SP - 569 EP - 573 PB - Lange CY - Düsseldorf ER - TY - GEN A1 - Richter, Nicole A1 - Segebrecht, Jennifer T1 - Führungskräfte als Coach T2 - Das Wirtschaftsstudium Y1 - 2018 SN - 0340-3084 IS - 8-9 SP - 937 EP - 941 ER - TY - GEN A1 - Richter, Nicole A1 - Schreiber, Elisa T1 - Mitarbeiter: Botschafter der Arbeitgebermarke T2 - Das Wirtschaftsstudium KW - Personalmarketing KW - Social Web KW - Risiko Y1 - 2019 SN - 0340-3084 IS - 8-9 SP - 916 EP - 921 PB - Lange CY - Düsseldorf ER - TY - GEN A1 - Faßbender, Nina A1 - Richter, Nicole T1 - Mit Rückenwind zum Aufstieg T2 - Personalwirtschaft - Magazin für Human Resources KW - Unternehmensorganisation KW - Unternehmenskultur KW - Führungskräfteentwicklung KW - Betriebliches Bildungsmanagement Y1 - 2020 SN - 0341-4698 IS - 4 SP - 24 EP - 25 PB - Business Media CY - Frankfurt ER - TY - GEN A1 - Richter, Nicole A1 - Seegmüller, Lisa T1 - Offboarding T2 - Das Wirtschaftsstudium Y1 - 2020 SN - 0340-3084 VL - 49 IS - 8-9 SP - 872 EP - 876 PB - Lange CY - Düsseldorf ER - TY - GEN A1 - Richter, Nicole T1 - Homeoffice und Führung T2 - Das Wirtschaftsstudium Y1 - 2021 SN - 0340-3084 VL - 2021 IS - 4 SP - 395 EP - 399 PB - Lange CY - Düsseldorf ER - TY - CHAP A1 - Richter, Nicole ED - Cansu, Hattula ED - Hilgers-Sekowsky, Julia ED - Schuster, Gabriele T1 - Praxisprojekte in der Lehre – ein transferorientiertes Lernkonzept T2 - Praxisorientierte Hochschullehre: Insights in innovative sowie digitale Lehrkonzepte und Kooperationen mit der Wirtschaft KW - Lerncoaching KW - Personalmanagement KW - Phasenmodell KW - Praxisprojekt KW - Transferorientiertes Lernkonzept Y1 - 2021 SN - 978-3-658-32393-6 U6 - https://doi.org/10.1007/978-3-658-32393-6 SP - 209 EP - 219 PB - Springer Gabler CY - Wiesbaden ER - TY - GEN A1 - Höfler, Marco A1 - Richter, Nicole A1 - Spivak, Olga T1 - Peer Recruiting: Teams in der Verantwortung bei der Personalauswahl T2 - Zeitschrift Führung und Organisation KW - Peer Recruitin KW - Recruiting-Prozess KW - Personalauswahl KW - Mitarbeiterbeschaffung Y1 - 2022 SN - 0722-7485 VL - 2022 IS - 2 SP - 110 EP - 115 PB - Schäffer-Poeschel Verlag CY - Stuttgart ER - TY - CHAP A1 - Richter, Nicole ED - Müller-Vorbrüggen, Michael ED - Radel, Jürgen T1 - Traineeprogramme T2 - Handbuch Personalentwicklung: Die Praxis der Personalbildung, Personalförderung und Arbeitsstrukturierung KW - Personalführung KW - Personalentwicklung KW - Personalbildung KW - Arbeitsstrukturierung KW - Personalwirtschaft Y1 - 2022 SN - 9783791055602 U6 - https://doi.org/10.34156/9783791055602 VL - 2022 SP - 471 EP - 487 PB - Schäffer-Poeschel Verlag CY - Stuttgart ET - 5. Auflage ER - TY - JOUR A1 - Mandal, Dipak Kumar A1 - Biswas, Nirmalendu A1 - Manna, Nirmal K A1 - Benim, Ali Cemal T1 - Impact of chimney divergence and sloped absorber on energy efficacy of a solar chimney power plant (SCPP) JF - Ain Shams Engineering Journal N2 - A numerical study is carried out meticulously to scrutinize the impact of different shapes of chimneys like circular (outer dia, dc), convergent (outer dia, 0.5dc), divergent (outer dia, 1.5dc), sudden contraction (outer dia, 0.5dc), and sudden expansion (outer dia, 1.5dc) on the performance of an SCPP. Furthermore, the parametric impact with different chimney divergence angles (CDA, ϕ), and ground absorber slope angle (GSA, γ) on the SCPP performance is also scrutinized. Optimum divergence angle (ϕ=+0.75◦) enhances the power generation up to ~ 47% (76 kW) with a horizontal ground absorber surface. An increase or decrease in CDA lessens the power generation. With a sloped ground absorber angle γ=0.6◦, the gain in power generation is 60% (82 kW). The study of combination of ground sloped absorber (γ=0.6◦) and divergent chimney (ϕ=+0.75◦) shows enhancement of the power generation upto 80% (92 kW) more than the classical Manzaranes plant. KW - Solar chimney power plant (SCPP) KW - Chimney divergence angle KW - Sloped absorber surface KW - Power generation KW - Efficiency KW - Regression analysis Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-42410 SN - 2090-4495 N1 - Datenverfügbarkeitserklärung: Daten, die die Ergebnisse dieser wissenschaftlichen Publikation stützen, sind auf begründete Anfrage bei dem*der korrespondierenden Autor*in erhältlich. PB - Elsevier ER - TY - CHAP A1 - Strygulec, Sarah A1 - Müller, Dennis A1 - Meuter, Mirko A1 - Nunn, Christian A1 - Ghosh, Shamila A1 - Wöhler, Christian T1 - Road boundary detection and tracking using monochrome camera images T2 - 2013 16th International Conference on Information Fusion (FUSION) Y1 - 2013 SN - 978-605-86311-1-3 SP - 864 EP - 870 PB - IEEE ER - TY - CHAP A1 - Müller, Dennis A1 - Pauli, Josef A1 - Nunn, Christian A1 - Gormer, Steffen A1 - Müller-Schneiders, Stefan T1 - Time to contact estimation using interest points T2 - Proceedings of the 12th International IEEE Conference on Intelligent Transportation Systems, St. Louis, MO, USA, October 3-7, 2009 Y1 - 2009 SN - 978-1-4244-5521-8 U6 - https://doi.org/10.1109/ITSC.2009.5309851 SP - 1 EP - 6 PB - IEEE CY - Piscataway, N.J. ER - TY - CHAP A1 - Müller, Dennis A1 - Pauli, Josef A1 - Meuter, Mirko A1 - Ghosh, Lali A1 - Müller-Schneiders, Stefan T1 - A generic video and radar data fusion system for improved target selection T2 - 2011 IEEE Intelligent Vehicles Symposium (IV) Y1 - 2011 SN - 978-1-4577-0891-6 U6 - https://doi.org/10.1109/IVS.2011.5940469 SP - 679 EP - 684 PB - IEEE ER - TY - CHAP A1 - Müller, Dennis A1 - Meuter, Mirko A1 - Park, Su-Birm T1 - Motion segmentation using interest points T2 - 2008 IEEE Intelligent Vehicles Symposium Y1 - 2008 SN - 978-1-4244-2568-6 U6 - https://doi.org/10.1109/IVS.2008.4621239 SP - 19 EP - 24 PB - IEEE ER - TY - CHAP A1 - Gavriilidis, Alexandros A1 - Müller, Dennis A1 - Müller-Schneiders, Stefan A1 - Velten, Jörg A1 - Kummert, Anton T1 - Sensor system blockage detection for night time headlight control based on camera and radar sensor information T2 - 15th International IEEE Conference on Intelligent Transportation Systems (ITSC), 2012, 16-19 Sept. 2012, Anchorage, Alaska, USA Y1 - 2012 SN - 978-1-4673-3063-3 U6 - https://doi.org/10.1109/ITSC.2012.6338854 SP - 78 EP - 83 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Meuter, Mirko A1 - Müller, Dennis A1 - Müller-Schneiders, Stefan A1 - Iurgel, Uri A1 - Park, Su-Birm A1 - Kummert, Anton ED - Bebis, George T1 - Pedestrian Tracking from a Moving Host Using Corner Points T2 - Advances in visual computing: Third international symposium ; proceedings Y1 - 2007 SN - 978-3-540-76855-5 U6 - https://doi.org/10.1007/978-3-540-76856-2_36 VL - Lecture notes in computer science, 4841 SP - 367 EP - 376 PB - Springer CY - Berlin; Heidelberg; New York ER - TY - CHAP A1 - Müller-Schneiders, Stefan A1 - Hold, Stephanie A1 - Meuter, Mirko A1 - Müller, Dennis A1 - Nunn, Christian T1 - Augmented reality in advanced driver assistance systems T2 - Conference on Artificial Intelligence, KI2009, Workshop Proceedings Y1 - 2009 ER - TY - CHAP A1 - Hilgers-Sekowsky, Julia A1 - Richter, Nicole A1 - Ermel, Nicole ED - Hilgers-Sekowsky, Julia ED - Richter, Nicole ED - Ermel, Nicole T1 - Nachhaltigkeit als transdisziplinäre Herausforderung für Nonprofit-Organisationen – Eine Einführung T2 - Nachhaltigkeit in Nonprofit-Organisationen: Transdisziplinäre Perspektiven für ein zukunftsfähiges Management KW - Nonprofit-Organisationen KW - Nachhaltigkeit KW - Transdisziplinarität Y1 - 2023 SN - 978-3-658-40659-2 U6 - https://doi.org/10.1007/978-3-658-40659-2 VL - SDG - Forschung, Konzepte, Lösungsansätze zur Nachhaltigkeit SP - 1 EP - 15 PB - Springer Gabler CY - Wiesbaden ER - TY - GEN ED - Hilgers-Sekowsky, Julia ED - Richter, Nicole ED - Ermel, Nicole T1 - Nachhaltigkeit in Nonprofit-Organisationen: Transdisziplinäre Perspektiven für ein zukunftsfähiges Management Y1 - 2023 U6 - https://doi.org/10.1007/978-3-658-40659-2 PB - Springer Gabler CY - Wiesbaden ER - TY - CHAP A1 - Nunn, Christian A1 - Kummert, Anton A1 - Müller, Dennis A1 - Meuter, Mirko A1 - Müller-Schneiders, Stefan T1 - An improved adaboost learning scheme using LDA features for object recognition T2 - Proceedings of the 12th International IEEE Conference on Intelligent Transportation Systems, St. Louis, MO, USA, October 3-7, 2009 Y1 - 2009 SN - 978-1-4244-5521-8 U6 - https://doi.org/10.1109/ITSC.2009.5309856 SP - 1 EP - 6 PB - IEEE CY - Piscataway, N.J. ER - TY - CHAP A1 - Zhao, Kun A1 - Meuter, Mirko A1 - Nunn, Christian A1 - Muller, Dennis A1 - Muller-Schneiders, Stefan A1 - Pauli, Josef T1 - A novel multi-lane detection and tracking system T2 - 2012 IEEE Intelligent Vehicles Symposium (IV) Y1 - 2012 SN - 978-1-4673-2119-8 U6 - https://doi.org/10.1109/IVS.2012.6232168 SP - 1084 EP - 1089 PB - IEEE ER - TY - CHAP A1 - Gonner, Steffen A1 - Müller, Dennis A1 - Hold, Stephanie A1 - Meuter, Mirko A1 - Kummert, Anton T1 - Vehicle recognition and TTC estimation at night based on spotlight pairing T2 - Proceedings of the 12th International IEEE Conference on Intelligent Transportation Systems, St. Louis, MO, USA, October 3-7, 2009 Y1 - 2009 SN - 978-1-4244-5521-8 U6 - https://doi.org/10.1109/ITSC.2009.5309848 SP - 1 EP - 6 PB - IEEE CY - Piscataway, N.J. ER - TY - CHAP A1 - Wohlmacher, Bernhard A1 - Klapperich, Holger A1 - Mertle, Fabian A1 - Huldtgren, Alina ED - Stolze, Markus ED - Loch, Frieder ED - Baldauf, Matthias ED - Alt, Florian ED - Schneegrass, Christina ED - Kosch, Thomas ED - Hirzle, Teresa ED - Sadeghian, Shadan ED - Draxler, Fiona ED - Bektas, Kenan ED - Lohan, Katrin ED - Knierim, Pascal T1 - Overcoming technology and communication barriers in intergenerational communication with a tangible interface T2 - MuC '23: Mensch und Computer 2023, Rapperswil Switzerland, September 3 - 6, 2023 N2 - Despite the higher uptake of digital media also in older age groups, there are still challenges for people of high ages and with cognitive or motoric problems, which prevent them from learning and using devices like smartphones or tablets. Tangible user interfaces provide an opportunity to connect these people to social media, thereby increasing their digital participation in society and reducing loneliness. In this paper, we discuss the challenges of intergenerational communication and research the opportunities affiliated with tangible technologies to overcome technology barriers for adults of high ages. We present a hybrid system for social media interactions between young smartphone users and their old relatives, who do not use mobile technologies. The system consists of a tangible user interface designed specifically for old adults that connects to a standard mobile messenger service. TAMI was designed in a user-centered process to fulfill the needs of older adults and tested in a longer-term field study with pairs of young and old relatives. Y1 - 2023 SN - 979-8-4007-0771-1 U6 - https://doi.org/10.1145/3603555.3608554 SP - 508 EP - 512 PB - Association for Computing Machinery CY - New York ER - TY - CHAP A1 - Marzi, Karoline A1 - Klapperich, Holger A1 - Huldtgren, Alina ED - Stolze, Markus ED - Loch, Frieder ED - Baldauf, Matthias ED - Alt, Florian ED - Schneegrass, Christina ED - Kosch, Thomas ED - Hirzle, Teresa ED - Sadeghian, Shadan ED - Draxler, Fiona ED - Bektas, Kenan ED - Lohan, Katrin ED - Knierim, Pascal T1 - Insights on Older Adults’ Willingness, Motives and Experiences regarding Participation in HCI research T2 - MuC '23: Proceedings of Mensch und Computer 2023, Rapperswil Switzerland, September 3 - 6, 2023 N2 - User-centered and Participatory Design approaches have become widespread within HCI, also when designing digital media for older adults. These methodologies are seen as crucial to adapt technology design to older people's needs and increase their acceptance of digital technology. Nevertheless, it is often difficult to reach a diverse group of older people, for instance, people with limited technology skills, limited mobility, or cognitive issues. In addition, gerontologists criticized lately how older people's participation unfolds in technology design projects, e.g. that people are pushed into the role of users. Little is known about the motivations and needs of older adults regarding their participation in HCI research. To close this gap, we conducted an online survey (N=46) and semi-structured interviews (N=8) focusing on motivations, willingness and experiences regarding participation. Results show that people are generally willing to participate due to interest in the topic, learning new things and social bonding. However, despite the conceptions within HCI that long-term engagement is crucial within participatory design, older people in the study preferred less commitment and more open formats. Y1 - 2023 SN - 979-8-4007-0771-1 U6 - https://doi.org/10.1145/3603555.3608540 SP - 432 EP - 436 PB - Association for Computing Machinery CY - New York ER - TY - CHAP A1 - Osterheider, Angela A1 - Klapperich, Holger A1 - Stein, Elisabeth A1 - Weiler, Tim A1 - Endter, Cordula A1 - Huldtgren, Alina A1 - Müller, Claudia ED - Stolze, Markus ED - Loch, Frieder ED - Baldauf, Matthias ED - Alt, Florian ED - Schneegrass, Christina ED - Kosch, Thomas ED - Hirzle, Teresa ED - Sadeghian, Shadan ED - Draxler, Fiona ED - Bektas, Kenan ED - Lohan, Katrin ED - Knierim, Pascal T1 - Conceptualization of the Understanding of Participation and Co-Creation in Interdisciplinary Research Groups developing Digital Health Technology: An Exploratory Study BT - MuC '23: Proceedings of Mensch und Computer 2023, Rapperswil Switzerland, September 3 - 6, 2023 N2 - The healthcare sector's digital transformation necessitates the involvement of stakeholders through participation and co-creation processes. This study aims to investigate the understanding and implementation of participation and co-creation in the development of hybrid interaction technologies in healthcare. Eight interdisciplinary research projects were examined through semi-structured group interviews with 49 participants from academia, industry, and the application field. The interviews focused on participants' perspectives on project goals, user groups, access to the field, methods of participation and co-creation, and user motivation. The results highlight the diverse understandings of participation and co-creation, with some perceiving them as research-driven and others as already embedded in user- centered design. The projects emphasized user needs but often excluded stakeholders from collaborative decision-making. Challenges in achieving continuous involvement and co-decision were acknowledged. The findings underscore the need for reflexive practice and evaluation of participation and co-creation throughout the development process, as well as further research on participation across projects. By addressing these challenges and embracing participatory approaches, digital health applications can better address ethical concerns, build trust, and increase acceptance and adoption in the healthcare sector. Y1 - 2023 SN - 979-8-4007-0771-1 U6 - https://doi.org/10.1145/3603555.3608572 SP - 534 EP - 538 PB - Association for Computing Machinery CY - New York ER - TY - GEN A1 - Huldtgren, Alina ED - van den Hoven, Jeroen ED - Vermaas, Pieter E. ED - van de Poel, Ibo T1 - Design for Values in ICTInformation and communication technologies T2 - Handbook of Ethics, Values, and Technological Design: Sources, Theory, Values and Application Domains KW - Information and communication technologies KW - Value-sensitive design KW - Design methods KW - Emerging technologies KW - Pervasiveness Y1 - 2015 SN - 978-94-007-6970-0 U6 - https://doi.org/10.1007/978-94-007-6970-0_35 SP - 739 EP - 767 PB - Springer CY - Dordrecht ER - TY - CHAP A1 - Huldtgren, Alina A1 - Klapperich, Holger A1 - Endter, Cordula ED - Maciaszek, Leszek A. ED - Mulvenna, Maurice D. ED - Ziefle, Martina T1 - Configuring Participatory Design of ICT for Aging Well as Matters of Care T2 - Information and Communication Technologies for Ageing Well and e-Health KW - User-centered design KW - Participatory design KW - Subjective wellbeing KW - Ageing KW - eHealth KW - ALL Y1 - 2023 SN - 978-3-031-37496-8 U6 - https://doi.org/10.1007/978-3-031-37496-8_9 N1 - This research is funded by the German Federal Ministry of Education and Research (NaDiA project, 01WJ2227A and CoCreHIT project 16SV8796). VL - Communications in Computer and Information Science, vol 1856 SP - 157 EP - 176 PB - Springer Nature CY - Cham ER - TY - CHAP A1 - Wohlmacher, Bernhard A1 - Mertl, Fabian A1 - Klapperich, Holger A1 - Huldtgren, Alina ED - Ziefle, Martina ED - Mulvenna, Maurice ED - Maciaszek, Leszek T1 - Hybrid Ludo: Combination of a Tangible UI for Seniors and a Web-based Ludo Game T2 - Proceedings of the 8th International Conference on Information and Communication Technologies for Ageing Well and e-Health, April 23-25, 2022 Y1 - 2022 SN - 978-989-758-566-1 U6 - https://doi.org/10.5220/0011069500003188 SN - 2184-4984 SP - 283 EP - 290 PB - SciTePress ER - TY - CHAP A1 - Huldtgren, Alina A1 - Klapperich, Holger A1 - Endter, Cordula ED - Ziefle, Martina ED - Mulvenna, Maurice ED - Maciaszek, Leszek T1 - Next Steps for User Integration in ICT for Aging Well T2 - Proceedings of the 8th International Conference on Information and Communication Technologies for Ageing Well and e-Health April 23-25, 2022 KW - AAL KW - Ehealth KW - Ageing KW - Participatory Design KW - User-centered design Y1 - 2022 SN - 978-989-758-566-1 U6 - https://doi.org/10.5220/0011072700003188 SN - 2184-4984 SP - 291 EP - 298 PB - SciTePress ER - TY - CHAP A1 - Huldtgren, Alina ED - Kuckert-Wöstheinrich, Andrea ED - Forsch, Georg ED - Wagner, Holger T1 - Medien, Design und Demenz T2 - Ethik Design Demenz eine multidisziplinäre Annäherung ; a multidisciplinary approach KW - Demenz KW - Design KW - Ethik Y1 - 2018 SN - 978-3-00-057748-2 SP - 44 EP - 57 PB - St. Augustinus Fachkliniken CY - Neuss ER - TY - CHAP A1 - Askari, Sima Ipakchian A1 - Huldtgren, Alina A1 - IJsselsteijn, Wijnand ED - Bamidis, P.D. ED - Ziefle, M. ED - Maciaszek, L. T1 - Wear it or fear it: exploration of drivers & barriers in smartwatch acceptance by senior citizens T2 - Proceedings of the 4th International Conference on Information and Communication Technologies for Ageing Well and e-Health,IC T4AWE - Volume 1, 26-36, 2018, Funchal, Madeira, Portugal KW - Assistive Technology KW - Seniors KW - Smartwatches KW - Technology Acceptance KW - Wearables Y1 - 2018 SN - 978-989-758-299-8 U6 - https://doi.org/10.5220/0006673000260036 SP - 26 EP - 36 PB - SciTePress Digital Library ER - TY - CHAP A1 - Jonker, Catholijn M. A1 - Aydoğan, Reyhan A1 - Baarslag, Tim A1 - Broekens, Joost A1 - Detweiler, Christian A. A1 - Hindriks, Koen V. A1 - Huldtgren, Alina A1 - Pasman, Wouter ED - Criado Pacheco, Natalia ED - Carrascosa, Carlos ED - Osman, Nardine ED - Julián Inglada, Vicente T1 - An Introduction to the Pocket Negotiator: A General Purpose Negotiation Support System T2 - Multi-Agent Systems and Agreement Technologies: 14th European Conference, EUMAS 2016, and 4th International Conference, AT 2016, Valencia, Spain, December 15-16, 2016 Y1 - 2017 SN - 978-3-319-59294-7 U6 - https://doi.org/10.1007/978-3-319-59294-7_2 VL - Lecture Notes in Computer Science (LNCS, volume 10207) SP - 13 EP - 27 PB - Springer CY - Cham ER - TY - JOUR A1 - Katsimerou, Christina A1 - Albeda, Joris A1 - Huldtgren, Alina A1 - Heynderickx, Ingrid A1 - Redi, Judith A. T1 - Crowdsourcing Empathetic Intelligence: The Case of the Annotation of EMMA Database for Emotion and Mood Recognition JF - ACM Transactions on Intelligent Systems and Technology KW - affective annotation KW - mood recognition KW - crowdsourcing KW - Multimodal database KW - emotion recognition Y1 - 2016 U6 - https://doi.org/10.1145/2897369 SN - 2157-6904 VL - 7 IS - 4 SP - 1 EP - 27 PB - Association for Computing Machinery ER - TY - GEN A1 - Huldtgren, Alina A1 - Katsimerou, Christina A1 - Kuijsters, Andre A1 - Redi, Judith A. A1 - Heynderickx, Ingrid E. J. ED - Geissbühler, Antoine ED - Demongeot, Jacques ED - Mokhtari, Mounir ED - Abdulrazak, Bessam ED - Aloulou, Hamdi T1 - Design Considerations for Adaptive Lighting to Improve Seniors’ Mood T2 - ICOST 2015: Inclusive Smart Cities and e-Health Y1 - 2015 SN - 978-3-319-19312-0 U6 - https://doi.org/10.1007/978-3-319-19312-0_2 VL - ecture Notes in Computer Science, vol. 9102 SP - 15 EP - 26 PB - Springer CY - Cham ER - TY - CHAP A1 - Huldtgren, Alina A1 - Mertl, Fabian A1 - Vormann, Anja A1 - Geiger, Chris ED - Abascal, Julio ED - Barbosa, Simone ED - Fetter, Mirko ED - Gross, Tom ED - Palanque, Philippe ED - Winckler, Marco T1 - Probing the Potential of Multimedia Artefacts to Support Communication of People with Dementia T2 - Human-Computer Interaction – INTERACT 2015 Y1 - 2015 SN - 978-3-319-22698-9 U6 - https://doi.org/10.1007/978-3-319-22698-9_6 VL - Lecture Notes in Computer Science, vol. 9298 SP - 71 EP - 79 PB - Springer CY - Cham ER - TY - CHAP A1 - Dielmann, Steffen A1 - Huldtgren, Alina ED - Pielot, Martin ED - Diefenbach, Sarah ED - Henze, Niels T1 - Eine haptische Lichtsteuerung für Senioren in Smart Environments T2 - Mensch und Computer 2015 – Tagungsband Y1 - 2015 SN - 9783110443929 U6 - https://doi.org/10.1515/9783110443929-035 SP - 287 EP - 290 PB - De Gruyter CY - Berlin, München, Boston ER - TY - CHAP A1 - Mertl, Fabian A1 - Dewitz, Bastian A1 - Braas, Uli A1 - Glomb, Arthur A1 - Huldtgren, Alina A1 - Vormann, Anja A1 - Geiger, Christian ED - Pielot, Martin ED - Diefenbach, Sarah ED - Henze, Niels T1 - Erinnerungsfenster für Demenzkranke T2 - Mensch und Computer 2015 – Tagungsband Y1 - 2015 SN - 9783110443929 U6 - https://doi.org/10.1515/9783110443929-037 SP - 295 EP - 302 PB - De Gruyter CY - Berlin, München, Boston ER - TY - CHAP A1 - Glomberg, Daniel A1 - Vogel, Christoph A1 - Drochtert, Daniel A1 - Huldtgren, Alina A1 - Geiger, Christian ED - Butz, Andreas ED - Koch, Michael ED - Schlichter, Johann T1 - P(a)inball Flippern mit Schmerz T2 - 14. Fachübergreifende Konferenz für Interaktive und Kooperative Medien - Interaktiv unterwegs - Freiräume gestalten Y1 - 2014 SN - 9783110344509 U6 - https://doi.org/10.1524/9783110344509.41 SP - 41 EP - 44 PB - De Gruyter CY - München ER - TY - CHAP A1 - Loss, Lukas A1 - Drochert, Daniel A1 - Hogen, Michael A1 - Hornig, Jörn A1 - Huldtgren, Alina A1 - Geiger, Christian T1 - “Public Brewing“ – eine interaktive Medienfassade mit einer be-greifbaren Nutzerschnittstelle T2 - Workshop ‘Be-greifbare Interaktion’ auf der Mensch & Computer 2014, München, Deutschland, September 2014. Y1 - 2014 CY - München ER - TY - CHAP A1 - Huldtgren, Alina A1 - Pedro, Gabriela Ascencio San A1 - Pohlmeyer, Anna E. A1 - Herrara, Natalia A.Romero T1 - AAL-technology acceptance through experience T2 - Proceedings - PERVASIVEHEALTH 2014: 8th International Conference on Pervasive Computing Technologies for Healthcare, Oldenburg Germany, May 20 - 23, 2014 KW - Ambient assisted living KW - Technology acceptance Y1 - 2014 SN - 9781631900112 U6 - https://doi.org/10.4108/icst.pervasivehealth.2014.254934 SP - 170 EP - 173 PB - Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering CY - Brussels ER - TY - JOUR A1 - Jacobs, Naomi A1 - Huldtgren, Alina T1 - Why value sensitive design needs ethical commitments JF - Ethics and Information Technology KW - Applied ethics KW - Ethical theory KW - Ethics KW - Technology KW - Value sensitive design Y1 - 2021 U6 - https://doi.org/10.1007/s10676-018-9467-3 SN - 1572-8439 VL - 23 IS - 1 SP - 23 EP - 26 PB - Springer Nature ER - TY - CHAP A1 - Mertl, Fabian A1 - Meißler, Nadine A1 - Wiek, Lena A1 - Fröhlich, Alina A1 - Huldtgren, Alina T1 - "Traumreise" - Exploring the Use of Multisensory Digital Media in Dementia Groups T2 - Proceedings of the 13th EAI International Conference on Pervasive Computing Technologies for Healthcare, Trento Italy May 20 - 23, 2019 KW - Dementia KW - Multi-Sensory Device KW - Field Study Y1 - 2019 SN - 9781450361262 U6 - https://doi.org/10.1145/3329189.3329199 SP - 189 EP - 197 PB - Association for Computing Machinery CY - New York ER - TY - PAT A1 - Braun, Alexander A1 - Richwin, Matthias A1 - Weber, Thomas T1 - Optoelektronische Sensoreinrichtung für ein Kraftfahrzeug N2 - Beschrieben wird eine optoelektronische Sensoreinrichtung für ein Kraftfahrzeug zur unterscheidenden Detektion von Feuchtigkeit und Salzlösungen auf einer Fahrzeugscheibe, mit einer Beleuchtungseinheit zur Einstrahlung von Licht in eine Fahrzeugscheibe und mit einem Lichtempfänger, welcher von der Fahrzeugscheibe reflektiertes Licht erfasst, sowie mit einem Koppelelement zur Ein- und Auskopplung von Licht in bzw. aus der Fahrzeugscheibe, wobei die Beleuchtungseinrichtung Licht über einen Einfallswinkelbereich in die Fahrzeugscheibe einstrahlt, der sich über mehrere Winkelgrade erstreckt, wobei der Lichtempfänger eine Vielzahl von Empfangselementen aufweist, wobei ein optisches System das von der Fahrzeugscheibe in einen Ausfallswinkelbereich reflektierte Licht auf Empfangselemente des Lichtempfängers abbildet und wobei der Lichtempfänger ein Signal generiert, aus dem eine Auswertevorrichtung den Grenzwinkel der Totalreflexion an der Fahrzeugscheibe ermittelt. Y1 - 2009 UR - https://depatisnet.dpma.de/DepatisNet/depatisnet?action=bibdat&docid=DE102007052704A1 PB - Deutsches Patent- und Markenamt ER - TY - INPR A1 - Geerkens, Simon A1 - Sieberichs, Christian A1 - Braun, Alexander A1 - Waschulzik, Thomas T1 - QI2 -- an Interactive Tool for Data Quality Assurance N2 - The importance of high data quality is increasing with the growing impact and distribution of ML systems and big data. Also the planned AI Act from the European commission defines challenging legal requirements for data quality especially for the market introduction of safety relevant ML systems. In this paper we introduce a novel approach that supports the data quality assurance process of multiple data quality aspects. This approach enables the verification of quantitative data quality requirements. The concept and benefits are introduced and explained on small example data sets. How the method is applied is demonstrated on the well known MNIST data set based an handwritten digits. KW - Data Structures and Algorithms KW - Machine Learning KW - Computers and Society KW - Artificial Intelligence Y1 - 2023 CY - arXiv ER - TY - JOUR A1 - Wolf, Dominik Werner A1 - Ulrich, Markus A1 - Braun, Alexander T1 - Novel developments of refractive power measurement techniques in the automotive world JF - Metrologia N2 - Refractive power measurements serve as the primary quality standard in the automotive glazing industry. In the light of autonomous driving new optical metrics are becoming more and more popular for specifying optical quality requirements for the windshield. Nevertheless, the link between those quantities and the refractive power needs to be established in order to ensure a holistic requirement profile for the windshield. As a consequence, traceable high-resolution refractive power measurements are still required for the glass quality assessment. Standard measurement systems using Moiré patterns for refractive power monitoring in the automotive industry are highly resolution limited, wherefore they are insufficient for evaluating the camera window area. Consequently, there is a need for more sophisticated refractive power measurement systems that provide a higher spatial resolution. In addition, a calibration procedure has to be developed in order to guarantee for comparability of the measurement results. For increasing the resolution, a measurement setup based on an auto-correlation algorithm is tested in this paper. Furthermore, a calibration procedure is established by using a single reference lens with a nominal refractive power of 100 km-1. For the calibration of the entire measurement range of the system, the lens is tilted by an inclination angle orthogonal to the optical axis. The effective refractive power is then given by the Kerkhof model. By adopting the measurement and calibration procedure presented in this paper, glass suppliers in the automotive industry will be able to detect relevant manufacturing defects within the camera window area more accurately paving the way for a holistic quality assurance of the windshield for future advanced driver-assistance system (ADAS) functionalities. Concurrently, the traceability of the measurement results is ensured by establishing a calibration chain based on a single reference lens, which is traced back to international standards. Y1 - 2023 UR - http://iopscience.iop.org/article/10.1088/1681-7575/acf1a4 U6 - https://doi.org/10.1088/1681-7575/acf1a4 SN - 1681-7575 IS - ACCEPTED MANUSCRIPT PB - IOP Publishing ER - TY - CHAP A1 - Müller, Patrick A1 - Braun, Alexander A1 - Keuper, Margret T1 - Impact of realistic properties of the point spread function on classification tasks to reveal a possible distribution shift T2 - NeurIPS 2022: Workshop on Distribution Shifts: Connecting Methods and Applications, December 3rd, 2022, New Orleans, USA KW - chromatic aberration KW - corruption KW - Deep Neural Networks KW - Distribution Shift KW - MTF Y1 - 2022 UR - https://openreview.net/forum?id=r7WJpE3oy0 CY - New Orleans ER - TY - INPR A1 - Sieberichs, Christian A1 - Geerkens, Simon A1 - Braun, Alexander A1 - Waschulzik, Thomas T1 - ECS -- an Interactive Tool for Data Quality Assurance N2 - With the increasing capabilities of machine learning systems and their potential use in safety-critical systems, ensuring high-quality data is becoming increasingly important. In this paper we present a novel approach for the assurance of data quality. For this purpose, the mathematical basics are first discussed and the approach is presented using multiple examples. This results in the detection of data points with potentially harmful properties for the use in safety-critical systems. KW - Artificial Intelligence KW - Machine Learning KW - PrePrint KW - Systems and Control Y1 - 2023 U6 - https://doi.org/10.48550/arXiv.2307.04368 PB - arXiv ER - TY - CHAP A1 - Müller, Patrick A1 - Braun, Alexander T1 - Simulating optical properties to access novel metrological parameter ranges and the impact of different model approximations T2 - 2022 IEEE International Workshop on Metrology for Automotive (MetroAutomotive), 4-6 July 2022 Y1 - 2022 SN - 978-1-6654-6689-9 U6 - https://doi.org/10.1109/MetroAutomotive54295.2022.9855079 SP - 133 EP - 138 PB - IEEE ER - TY - JOUR A1 - Müller, Patrick A1 - Braun, Alexander T1 - Local performance evaluation of AI-algorithms with the generalized spatial recall index JF - tm - Technisches Messen Y1 - 2023 U6 - https://doi.org/10.1515/teme-2023-0013 SN - 2196-7113 VL - 90 IS - 7-8 SP - 464 EP - 477 PB - de Gruyter ER - TY - JOUR A1 - Müller, Patrick A1 - Braun, Alexander T1 - MTF as a performance indicator for AI algorithms? JF - Electronic Imaging: Society for Imaging Science and Technology N2 - Abstract The modulation-transfer function (MTF) is a fundamental optical metric to measure the optical quality of an imaging system. In the automotive industry it is used to qualify camera systems for ADAS/AD. Each modern ADAS/AD system includes evaluation algorithms for environment perception and decision making that are based on AI/ML methods and neural networks. The performance of these AI algorithms is measured by established metrics like Average Precision (AP) or precision-recall-curves. In this article we research the robustness of the link between the optical quality metric and the AI performance metric. A series of numerical experiments were performed with object detection and instance segmentation algorithms (cars, pedestrians) evaluated on image databases with varying optical quality. We demonstrate with these that for strong optical aberrations a distinct performance loss is apparent, but that for subtle optical quality differences – as might arise during production tolerances – this link does not exhibit a satisfactory correlation. This calls into question how reliable the current industry practice is where a produced camera is tested end-of-line (EOL) with the MTF, and fixed MTF thresholds are used to qualify the performance of the camera-under-test. KW - AI performance metrics KW - Artificial Intelligence KW - Modulation Transfer Function (MTF) KW - Optical Quality KW - Perception Y1 - 2023 U6 - https://doi.org/10.2352/EI.2023.35.16.AVM-125 SN - 2470-1173 VL - 35 IS - 16 SP - 1 EP - 7 PB - Society for Imaging Sciences and Technology ER - TY - CHAP A1 - Wohlmacher, Bernhard A1 - Mertl, Fabian A1 - Klapperich, Holger A1 - Huldtgren, Alina T1 - Hybrid Ludo: Combination of a Tangible UI for Seniors and a Web-based Ludo Game T2 - Proceedings of the 8th International Conference on Information and Communication Technologies for Ageing Well and e-Health - ICT4AWE KW - Tangible User Interfaces KW - User-centered Design KW - Older Adults Y1 - 2022 SN - 978-989-758-566-1 U6 - https://doi.org/10.5220/0011069500003188 SN - 2184-4984 VL - 1 SP - 290 PB - SciTePress ER - TY - GEN A1 - Buch, Susanne A1 - Claas, Oliver A1 - Eilert, Eva A1 - Fliegner, Angelika A1 - Raatz, Philip A1 - Reiter, Martin A1 - Sauther-Patrascu, Katharina A1 - Schick, Elena T1 - Generalisierte FDM-Aufgaben an HAW sowie Erfahrungen in der hochschulübergreifenden Zusammenarbeit und Integration NRW- und bundesweiter Angebote: Die Perspektive der FDMScout*innen N2 - Forschungsdatenmanagement (FDM) nimmt in Wissenschaftsinstitutionen und Scientific Communities einen immer größeren Stellenwert ein. Hochschulen für angewandte Wissenschaften (HAW) sehen sich mithin der Aufgabe gegenübergestellt, Rahmenbedingungen für ein gelingendes FDM in Forschungsvorhaben zu schaffen. Die vorliegende Grafik hat zum Ziel, die Ausgestaltung dieser Rahmenbedingungen zu befördern, indem sie – mit Blick auf die operative Ebene – die Bedarfe der Forschenden mit FDM-Dienstleistungen zusammenbringt sowie Wechselwirkungen visualisiert. Auf diese Weise soll sie die Komplexität des Handlungsfelds FDM veranschaulichen und zugleich als Handreichung zur Ausgestaltung adäquater FDM-Ressourcen und -Prozesse für die Zielgruppe der Forschenden dienen. Die Zusammenstellung basiert auf den generalisierten Erfahrungen, die zwischen 2020 und 2023 von den in der Förderlinie „FDMScouts.nrw“ finanzierten Projektverbünden in vier gemeinsamen Handlungsfeldern (Netzwerkarbeit, Information und Sensibilisierung, Koordination, Beratung) gesammelt wurden. Die zehn beteiligten Hochschulen arbeiteten in fünf Verbünden an Strukturen und Prozessen für eine nachhaltige Etablierung des Forschungsdatenmanagements vor Ort. Dabei berücksichtigt die Grafik überregionale Serviceangebote und Institutionen für den Bereich FDM, wie sie bis zum Zeitpunkt der Veröffentlichung zur Verfügung standen. KW - Forschungsdaten KW - FDM KW - Forschungsdatenmanagement Y1 - 2023 U6 - https://doi.org/10.5281/zenodo.7886667 PB - Zenodo ER - TY - GEN A1 - Eilert, Eva T1 - Datenlebenszyklus N2 - Ein Datenlebenszyklus dient als Rahmen für das strukturierte Datenmanagement. Er umfasst den gesamten Datenfluss von der Planung über die Erzeugung bis hin zur Aufbewahrung und Bereitstellung. An allen Stationen des Datenlebenszyklus können Maßnahmen für ein strukturiertes Datenmanagement getroffen werden, um Daten effizient zu nutzen, ihre Qualität sicherzustellen und ihre Langzeitverfügbarkeit zu gewährleisten. Die vorliegende Grafik visualisiert den Datenlebenszyklus, der sich aus drei Hauptbereichen zusammensetzt: Planung und Nachnutzung, Erzeugung und Bearbeitung sowie Aufbewahrung und Bereitstellung. Jeder Bereich umfasst spezifische Aufgaben und Prozesse im Umgang mit Daten. Die erste Phase „Planung und Nachnutzung“ beinhaltet zwei wesentliche Elemente. Als Erstes erfolgt die Planung des Forschungsvorhabens, bei der die Ziele, Methoden und Ressourcen definiert werden. Als Zweites umfasst sie die Recherche und Wiederverwendung bereits vorhandener Daten, um deren Nutzen und Potenzial für das vorliegende Projekt einzuschätzen. Die zweite Phase „Erzeugung und Bearbeitung“ besteht aus drei Elementen, die in einem eigenen zirkulären Ablauf abgebildet sind. Als Erstes werden Daten erhoben und erfasst, entweder durch experimentelle Studien, Umfragen oder andere Methoden. Der Übergang von der ersten Phase zur zweiten Phase erfolgt über dieses Element, da hier die grundlegende Generierung eigener Daten innerhalb der Forschung beginnt. Als Zweites werden die gesammelten Daten gespeichert und organisiert, um ihre Integrität und Verfügbarkeit zu gewährleisten. Als Drittes erfolgt die Verarbeitung, Analyse und Auswahl der relevanten Informationen. Der Übergang von der zweiten Phase zur dritten Phase erfolgt aus diesem Element, da die gewonnenen Erkenntnisse für die weitere Aufbewahrung und Bereitstellung vorbereitet werden. Insgesamt bildet die zweite Phase einen kontinuierlichen Kreislauf. Die dritte Phase „Aufbewahrung und Bereitstellung“ besteht aus drei Elementen. Als Erstes erfolgt die Publikation der Forschungsergebnisse, sei es in wissenschaftlichen Zeitschriften, Repositorien oder anderen relevanten Publikationsorten. Als Zweites werden die Daten archiviert, um ihre Langzeitverfügbarkeit und -integrität zu gewährleisten. Als Drittes wird Zugang zu den Forschungsergebnissen geschaffen, beispielsweise über eine gezielte Freigabe für bestimmte Nutzergruppen oder Erhöhung der Sichtbarkeit. KW - Forschungsdaten KW - FDM KW - Forschungsdatenmanagement Y1 - 2023 U6 - https://doi.org/10.5281/zenodo.8087764 N1 - Diese Grafik entstand im Rahmen des Projektmoduls des Zertifikatskurses Forschungsdatenmanagement 2022/2023 (Ein kooperatives Angebot der Landesinitiative für Forschungsdatenmanagement NRW - fdm.nrw, ZB MED - Infor­mationszentrum Lebens­wissen­schaften und ZBIW; https://www.th-koeln.de/weiterbildung/zertifikatskurs-forschungsdatenmanagement_82048.php). Die Grafik steht in 3 Formaten zur Verfügung (PNG, SVG, AI) - Farben, Konturen und Beschriftung sind je nach Dateiformat individualisierbar. PB - Zenodo ER - TY - CHAP A1 - Tisch, Anita A1 - Tophoven, Silke ED - Hilgers-Sekowsky, Julia ED - Richter, Nicole ED - Ermel, Nicole T1 - Beschäftigungs- und Arbeitsqualität von Berufen im Nonprofit-Sektor im Fokus sozialer Nachhaltigkeit T2 - Nachhaltigkeit in Nonprofit-Organisationen: Transdisziplinäre Perspektiven für ein zukunftsfähiges Management Y1 - 2023 SN - 978-3-658-40659-2 U6 - https://doi.org/10.1007/978-3-658-40659-2_4 VL - SDG - Forschung, Konzepte, Lösungsansätze zur Nachhaltigkeit SP - 51 EP - 62 PB - Springer Gabler CY - Wiesbaden ER -