TY - CHAP A1 - Windte, Jan A1 - Radespiel, Rolf A1 - Neef, Matthias ED - Kroll, Norbert ED - Fassbender, Jens K. T1 - Aerodynamic Analysis of Flapping Airfoil Propulsion at Low Reynolds Numbers T2 - MEGAFLOW - Numerical Flow Simulation for Aircraft Design KW - Lift Curve KW - Chord Length KW - Pitch Motion KW - Laminar Separation Bubble KW - Combine Motion Y1 - 2005 SN - 978-3-540-24383-0 U6 - https://doi.org/10.1007/3-540-32382-1_21 VL - NNFM, 89 SP - 299 EP - 313 PB - Springer-Verlag CY - Berlin, Heidelberg ER - TY - CHAP A1 - Völker, Lutz A1 - Casey, Michael A1 - Neef, Matthias A1 - Stüer, Heinrich T1 - The Flow Field and Performance of a Model Low Pressure Steam Turbine T2 - 6th European Conference on Turbomachinery - Fluid Dynamics and Thermodynamics : conference proceedings; 7-11 March 2005, Lille, France N2 - A 3-stage model of a low pressure steam turbine has been equipped with extensive instrumentation to assess aerodynamic performance and for validation of numerical methods. Emphasis was placed on detailed measurements at the inlet and exit of the last stage guide vane. Two configurations were examined – the first used a guide vane with lean in the last stage and a the second used a guide vane combining both lean and sweep. The experimental results from the two configurations have been compared with data from various design methods, ranging from through-flow to 3D multistage viscous simulations with mixing planes. Despite the challenges in modelling complex rotating blades in a wet steam environment, good agreement between the numerical and experimental results was obtained, and the new stator vane combining lean and sweep achieved the desired increase in reaction at the hub section. Y1 - 2005 CY - Lille ER - TY - CHAP A1 - Hurd, Paul A1 - Truckenmueller, Frank A1 - Thamm, Norbert A1 - Pollak, Helmut A1 - Neef, Matthias A1 - Deckers, Mathias T1 - Modern Reaction HP/IP Turbine Technology Advances and Experiences T2 - Proceedings of the ASME Power Conference - 2005 : includes papers from the 2005 International Conference on Power Engineering (ICOPE) ; presented at the 2005 ASME Power Conference, April 5 - 7, 2005, Chicago, Illinois, USA Y1 - 2005 UR - https://asmedigitalcollection.asme.org/POWER/proceedings/POWER2005/41820/425/311927 SN - 0-7918-4182-0 U6 - https://doi.org/10.1115/PWR2005-50085 SP - 425 EP - 435 PB - ASME CY - New York ER -