TY - GEN A1 - Adam, Mario T1 - Windheizung 2.0 – Erfolgreiche Umsetzung der EU-Nachhaltigkeitsziele T2 - hn21 Journal KW - Windheizung 2.0 Y1 - 2022 UR - https://www.hn-nrw.de/aktivitaeten/publikationen/journal/# SP - 1 EP - 1 PB - Zentrum für Forschungskommunikation CY - Köln ER - TY - RPRT A1 - Adam, Mario A1 - Dreher, Martina A1 - Ebling, Dirk A1 - Knopp, Reinhold A1 - Neef, Matthias A1 - Niess, Robert A1 - Pohl, Tobias A1 - Stahl, Wilhelm A1 - van Rießen, Anne A1 - Waldow, Friederike A1 - Weber, Konradin A1 - Weis, Stephanie T1 - LUST Forschungsprojekt - lebenswerte und umweltgerechte Stadt N2 - LUST (lebenswerte und umweltgerechte Stadt) ist ein interdisziplinäres Projekt der Fachbereiche Architektur, Maschinenbau und Verfahrenstechnik sowie Kultur- und Sozialwissenschaften der Hochschule Düsseldorf. Mittelpunkt des Projektes ist die fachübergreifende Entwicklung neuer Konzepte für eine lebenswerte und umweltgerechte Stadt. Es wurde gefördert vom Land Nordrhein-Westfalen im Rahmen des Programms „FH Struktur“. N2 - LUST (Liveable and environment-friendly Urban SiTe) is an interdisciplinary project of the faculties of Architecture, Mechanical and Process Engineering as well as Social Studies and Cultural Sciences at the University of Applied Sciences Düsseldorf. The four-year (2013 – 2016) project is funded by the Ministry of Innovation, Science and Research of North Rhine–Westphalia. The aim is to develop holistic, new concepts for a liveable and environmentally friendly city in a multidisciplinary manner. KW - Stadtentwicklung KW - lebenswert KW - umweltgerecht KW - substainable urban development KW - environmentally friendly KW - liveable Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-11458 SN - 978-3-941334-43-4 CY - Düsseldorf ER - TY - CHAP A1 - Adam, Mario A1 - Dreher, Martina A1 - Schramm, Sebastian A1 - Anthrakidis, Anette A1 - Faber, Christian A1 - Lanz, Marco T1 - Solare-ProzesswärmeStandards. Poster Session T2 - World Sustainable Energy Days 2011, 2.-4. März, Wels KW - Solare-Prozesswärme-Standards KW - Poster Y1 - 2011 CY - Wels ER - TY - GEN A1 - Adam, Mario A1 - Gottschald, Jonas T1 - Kempen wird zum Reallabor T2 - Stadt + Werk: Energiepolitik, Klimaschutz, Rekommunalisierung KW - BestHeatNet Y1 - 2019 SN - 2193-195X VL - 9 IS - 7/8 SP - 22 EP - 23 PB - K21 Media AG ER - TY - CHAP A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Ille, Fabian A1 - Wirth, Hans Peter T1 - Bestandsaufnahme von solarthermischen Großanlagen aus den Förderprogrammen Solarthermie-2000 und Solarthermie2000plus T2 - 26. Symposium Thermische Solarenergie 2016, 20.-22.04.2016, Bad Staffelstein KW - ST2000-LangEff Y1 - 2016 UR - http://docplayer.org/78153296-Bestandsaufnahme-von-solarthermischen-grossanlagen-aus-den-foerderprogrammen-solarthermie-2000-und-solarthermie2000plus.html CY - Bad Staffelstein ER - TY - CHAP A1 - Adam, Mario A1 - Ille, Fabian A1 - Radosavljevic, Radojka A1 - Wirth, Hans Peter T1 - PVT-Solarkollektoren - Marktanalyse und Etrags-/Betriebssimulationen von Gesamtsystemen mit Wärmepumpen. Posterpräsentation T2 - 25. OTTI Symposium Thermische Solarenergie, 6.-8.05.2015, Bad Staffelstein KW - PVT-Norm Y1 - 2015 CY - Bad Staffelstein ER - TY - CHAP A1 - Adam, Mario A1 - Lohmann, Sandra T1 - Berechnungs- und Auslegungstool zur energieeffizienten Kühlung von Gebäuden (Coolplan). P5-28 T2 - EnOB-Symposium 2014: Energieinnovationen in Neubau und Sanierung: Neues aus der Forschung für mehr Energieeffizienz, Raumkomfort, Wirtschaftlichkeit und Nachhaltigkeit, 20.–21. März 2014, Essen, Zeche Zollverein KW - Coolplan Y1 - 2014 PB - Projektträger Jülich CY - Essen ER - TY - GEN A1 - Adam, Mario A1 - Lohmann, Sandra T1 - Vermessung der Yazaki-Absorptionskältemaschine WFC-SC5 T2 - KI Kälte - Luft - Klimatechnik KW - Solare Kühlung Y1 - 2014 UR - https://www.ki-portal.de/wp-content/uploads/2014/02/KI_2014_01-02_Wissenschaft_Lohmann.pdf SN - 1865-5432 VL - 50 IS - 1/2 SP - 26 EP - 30 PB - Hüthig ER - TY - GEN A1 - Adam, Mario A1 - Lohmann, Sandra T1 - Solare Kühlung – Dynamische Rechnersimulationen und Parametervariationen T2 - KI Kälte - Luft - Klimatechnik KW - Solare Kühlung Y1 - 2011 SN - 1865-5432 VL - 47 IS - 5 SP - 22 EP - 26 PB - Hüthig ER - TY - CHAP A1 - Adam, Mario A1 - Walter, D. A1 - Backes, Klaus A1 - Steinweg, Jan T1 - Classification of Hydraulic Designs and Hardware-in-the-loop-Tests of Solar Assisted Heating Systems for Multi-Family Houses T2 - 2016 International Energy and Sustainability Conference (IESC), 30.06.-1.07.2016, Cologne KW - SUW-MFH Y1 - 2016 UR - https://doi.org/10.1109/IESC.2016.7569494 U6 - https://doi.org/10.1109/IESC.2016.7569494 SP - 1 EP - 6 PB - IEEE CY - Köln ER - TY - CHAP A1 - Aghamiri, Kathrin A1 - Streck, Rebekka A1 - van Rießen, Anne ED - Böhmer, Anselm ED - Engelbracht, Mischa ED - Hünersdorf, Bettina ED - Kessl, Fabian ED - Täubig, Vicki T1 - Die Stimme der Adressat*innen in der Corona-Pandemie. T2 - Soz Päd Corona. Der sozialpädagogische Blog rund um Corona Y1 - 2021 UR - https://sozpaed-corona.de/die-stimmen-der-adressatinnen-in-der-corona-pandemie/ CY - Halle ER - TY - GEN A1 - Aghamiri, Kathrin A1 - Streck, Rebekka A1 - van Rießen, Anne T1 - Alltag und Soziale Arbeit in der Corona-Pandemie. Einblicke in Perspektiven der Adressat*innen N2 - Wie ergeht es Menschen in ohnehin schon schwierigen Lebenslagen während der Corona-Krise? Ziel des Sammelbandes ist es, die Perspektive von Adressat*innen und Nutzer*innen Sozialer Arbeit auf die durch die Corona-Krise bedingten Veränderungen ihrer Alltagswelten und die Angebote Sozialer Arbeit empirisch aufzuzeigen. Hierzu werden im Sammelband sowohl erste empirische Analysen dargestellt als auch die vorliegenden Ergebnisse übergreifend auf Theoriedebatten sowie Impulse für Praxis und Forschung Sozialer Arbeit hin diskutiert. Der gegenwärtigen empirischen Leerstelle bezogen auf die Wahrnehmung der Krise von Adressat*innen und Nutzer*innen Sozialer Arbeit steht aktuell eine weit verbreitete Sorge dem Wohlergehen der Adressat*innen Sozialer Arbeit entgegen. Seit April 2020 gibt es eine Vielzahl an Problemaufrissen, Brandbriefen, problematisierenden Analysen, die die Corona-Krise als Verstärkerin ohnehin bestehender sozialer Ungleichheiten betrachten und je nach Ausrichtung politische Interventionen fordern. Ein Großteil dieser Analysen bezieht sich entweder auf Einschätzungen von Sozialarbeiter*innen oder auf analytische Schlüsse. Im Vergleich zur Perspektive der Sozialen Arbeit als Profession gibt es dagegen bisher kaum Veröffentlichungen zu der Frage, wie die Adressat*innen und Nutzer*innen Sozialer Arbeit selbst die Corona-Krise betrachten und erleben, die in all ihrer Unterschiedlichkeit doch gemein haben, dass sie zumeist über unterdurchschnittliche soziale, ökonomische und kulturelle Ressourcen verfügen. Als Fachgruppe Adressat*innen, Nutzer*innen und (Nicht)Nutzung Sozialer Arbeit der DGSA fühlen wir uns jedoch genau dieser Perspektive besonders verpflichtet: diejenigen zu Wort kommen zu lassen, ,über die in der Sozialen Arbeit meist nur gesprochen wird KW - Adressat*innen KW - Nutzer*innenperspektive KW - Corona-Pandemie KW - soziale Ungleichheit Y1 - 2022 SN - 978-3-8474-2565-6 N1 - Erscheinungsdatum : ca. 13.06.2022 PB - Barbara Budrich CY - Opladen, London, Toronto ER - TY - RPRT A1 - Agnese, Pablo ED - Kalmring, Dirk T1 - Offshoring and Productivity Revisited: A Time-Series Analysis T1 - Zur Debatte um Offshoring und Produktivität: Eine Zeitreihenanalyse N2 - The subject of offshoring and productivity has not yet received the attention it deserves. Here I propose a simple framework for estimating the contribution of these strategies to the growth rate of labor productivity from a time-series perspective. This framework is then used to assess the impact of offshoring on skill upgrading and the labor share. For both empirical questions I take up the study of a group of Japanese industries during the recent years of slow growth. The results should be interpreted with caution yet clearly suggest that offshoring can improve labor productivity in the semiconductors industry. Moreover, offshoring is found to be the source of important changes among industries with different skills (skill upgrading) and an important factor behind the fall of the labor share. N2 - Der Zusammenhang zwischen Ausgliederung von Unternehmensprozessen in andere Länder (Offshoring) und Produktivität hat noch nicht die Aufmerksamkeit in der wissenschaftlichen Debatte gefunden, die er verdient. Dieser Beitrag stellt eine einfache Methode vor, wie sich der Wachstumsbeitrag zur Arbeitsproduktivität von mit Outsourcing verbundenen Strategien ökonometrisch im Zeitablauf schätzen lässt. Der vorgeschlagene Ansatz wird dann dazu verwendet, die Wirkung von Offshoring auf die Qualifikationsentwicklung und die Lohnquote zu bestimmen. Zur Beantwortung der beiden empirischen Fragen verwendet die Studie ausgewählte japanische Branchen während der Phase geringen Wachstums in jüngerer Zeit. Die gefundenen Ergebnisse zeigen, dass Offshoring die Arbeitsproduktivität in der Halbleiterindustrie verbessert hat. Sie sollten jedoch mit der üblichen Vorsicht interpretiert werden. Darüber hinaus ist Offshoring eine wesentlicher Grund für den Wandel von Branchen mit unterschiedlicher Qualifikationszusammensetzung (verbesserte Durchschnittsqualifikation) und eine wichtige Determinante der gesunkenen Lohnquote. T3 - Forschungsberichte des Fachbereichs Wirtschaftswissenschaften der Hochschule Düsseldorf - 23 KW - Offshoring KW - Arbeitsproduktivität KW - Qualifikation KW - Lohnquote KW - Outsourcing KW - Offshoring KW - Labor Productivity KW - Skill Upgrading KW - Labor Share KW - FHD Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-7996 N1 - Erster / früherer Titel der Reihe: Forschungsberichte des Fachbereichs Wirtschaft der Fachhochschule Düsseldorf bis 2014 IS - 23 CY - Düsseldorf ER - TY - JOUR A1 - Agnese, Pablo T1 - Employment Effects of Offshoring across Sectors and Occupations in Japan JF - Asian Economic Journal Y1 - 2012 U6 - https://doi.org/10.1111/j.1467-8381.2012.02089.x VL - 26 IS - 4 SP - 289 EP - 311 PB - Wiley ER - TY - RPRT A1 - Agnese, Pablo A1 - Hromcová, Jana T1 - Low-Skill Offshoring: Labor Market Policies and Welfare Effects T1 - Internationales Outsourcing von gering qualifizierter Arbeit: Arbeitsmarktpolitik und Wohlfahrtseffekte N2 - We analyze the effects of low-skill workers offshoring on the welfare of the economy. In the context of a matching model with different possible equilibria, we discuss two policies that could potentially outweigh the negative welfare effects of offshoring, namely, an increase of the unemployment benefits and the flexibilization of the labor market. Our results suggest that, while both policy instruments can theoretically bring the economy back to previous welfare levels, careful thought should be given to the practicability of either measure. In particular, it would take a major increase of the unemployment benefits but only a small reduction in the vacancy cost to compensate for the negative welfare effects of offshoring. In addition, we also find that the compensation can be achieved by an upgrading of the low-skill workers that varies with the equilibria. N2 - Die Autoren analysieren die Wirkungen von internationaler Verlagerung (Offshoring) niedrig qualifizierter Beschäftigung auf die Wohlfahrt der betroffenen Volkswirtschaft. Mit Hilfe eines Matching-Modells mit unterschiedlichen möglichen Gleichgewichten untersuchen die Verfasser zwei Politikmaßnahmen, die potenziell die negativen Wohlfahrtseffekte des Offshorings überkompensieren können. Im Einzelnen umfassen die Maßnahmen einen Anstieg der Lohnersatzleistungen für Arbeitslose sowie eine Flexibilisierung des Arbeitsmarktes. Die Ergebnisse lassen sich folgendermaßen zusammenfassen: Während beide Politikmaßnahmen zwar theoretisch die Volkswirtschaft zurück auf ihr Wohlfahrtsniveau vor Offshoring bringen können, so ist doch die Praktikabilität beider wirtschaftspolitischen Instrumente eher zweifelhaft. So würde insbesondere ein großer Anstieg der Arbeitslosengeldleistungen erforderlich sein, aber nur eine kleine Verringerung der Kosten einer offenen Stelle, um die negativen Wohlfahrtseffekte des Offshoring auszugleichen. Zusätzlich arbeitet das Papier heraus, dass eine Kompensierung der Effekte ebenfalls möglich ist durch eine Höherqualifizierung der niedrig qualifizierten Arbeitnehmer, die abhängig ist von dem spezifischen Gleichgewicht ist, das sich einstellt. T3 - Forschungsberichte des Fachbereichs Wirtschaftswissenschaften der Hochschule Düsseldorf - 30 KW - Internationales Outsourcing KW - Offshoring KW - Wohlfahrt KW - Lohnersatzleistungen KW - Arbeitsmarktflexibilität KW - Höherqualifizierung KW - Offshoring KW - Welfare KW - Unemployment Benefits KW - Labor Market Flexibility KW - Upgrading Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-8589 N1 - Erster / früherer Titel der Reihe: Forschungsberichte des Fachbereichs Wirtschaft der Fachhochschule Düsseldorf bis 2014 IS - 30 CY - Düsseldorf ER - TY - JOUR A1 - Agnese, Pablo A1 - SALA, HECTOR T1 - The Driving Forces Behind the Falling Labour Share and Persistent Unemployment in Japan JF - Pacific Economic Review Y1 - 2011 U6 - https://doi.org/10.1111/j.1468-0106.2011.00566.x VL - 16 IS - 5 SP - 577 EP - 603 PB - Wiley ER - TY - JOUR A1 - Agnese, Pablo A1 - Salvador, Pablo F. T1 - More alike than different: the Spanish and Irish labour markets before and after the crisis JF - IZA Journal of European Labor Studies KW - DOAJ Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-28185 SN - 2193-9012 VL - 1 IS - 1 PB - Springer Nature ER - TY - JOUR A1 - Al-Sadawi, L. A1 - Biedermann, Till M. A1 - Fritsche, M. T1 - Passive Control of Vortex Shedding Noise of Circular Cylinders by Passive Air-Jet Blowing JF - Journal of Aerospace Engineering KW - Mechanical Engineering KW - Aerospace Engineering KW - General Materials Science KW - Civil and Structural Engineering Y1 - 2021 U6 - https://doi.org/10.1061/(asce)as.1943-5525.0001301 SN - 0893-1321 VL - 34 IS - 5 PB - American Society of Civil Engineers (ASCE) ER - TY - RPRT A1 - Albers, Felicitas G. ED - Kalmring, Dirk T1 - Compliance der Compliance: Elektronische Analyseverfahren personenbezogener Daten zur Prävention und Aufdeckung geschäftsschädigender Handlungen in Unternehmen. T1 - Compliance audit: Digital Analysis of personal data for Protecting and Detecting Fraud in Companies. Discourse about the so-called "data scandal" of Deutsche Bahn AG. N2 - Untertitel: Diskurs aus Anlass des sogenannten "Datenskandals" der Deutsche Bahn AG. Im Rahmen einer umfassenden betrieblichen "Compliance", also der Gewährleistung einer gesetzestreuen und regelkonformen, ordnungsgemäßen Unternehmensführung, ist durch geeignete Kontrollen sicher zu stellen, dass Gesetzesverstöße und regelwidriges Verhalten im Unternehmen sowie aus ihnen resultierende Schäden vermieden werden. Dabei kommen IT-gestützte Verfahren zum Einsatz, die ihrerseits den Anforderungen der Compliance, insbesondere hinsichtlich Datenschutz- und Mitbestimmungsrecht, genügen müssen. Die Abhandlung versteht sich als Diskussionsbeitrag im Zusammenhang mit dem sogenannten "Datenskandal" der Deutsche Bahn AG 2009 und seiner Erörterung in der deutschen Öffentlichkeit. N2 - Within the framework of an effective and efficient compliance audit, the corporate governance is responsible for protection against fraud. Computer assisted analytic procedures, such as data screening, data mining and so on, have to meet the standards of data protection and workers co-determination. The paper considers the so-called "data scandal" of Deutsche Bahn AG in 2009 and its perception by the German public. T3 - Forschungsberichte des Fachbereichs Wirtschaftswissenschaften der Hochschule Düsseldorf - 6 KW - Pesonenbezogene Daten KW - Deutsche Bahn AG KW - Compliance KW - Datenschutz KW - business intelligence KW - digital analysis KW - digital rights KW - forensic accounting KW - fraud KW - compliance audit KW - FHD Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-5083 N1 - Erster / früherer Titel der Reihe: Forschungsberichte des Fachbereichs Wirtschaft der Fachhochschule Düsseldorf bis 2014 IS - 6 CY - Düsseldorf ER - TY - RPRT A1 - Albers, Felicitas G. ED - Bleuel, Hans-H. T1 - Unternehmensziele und Compliance T1 - Business Targets and Compliance N2 - (Version 2 seit 30.03.2022 verfügbar - https://opus4.kobv.de/opus4-hs-duesseldorf/3661) ------------------------------------------------------------------------- Die unternehmerische Zielfindung und Zielsetzung ist Ausgangspunkt jeder Befassung mit Fragen der Unternehmensführung, die Zielautonomie der Unternehmen konstitutives Merkmal einer marktwirtschaftlichen Ordnung. Regulierende Vorgaben, wie die Normierung des ‚Unternehmensinteresses‘ im deutschen Aktienrecht sowie ethisch-normative theoretische Ansätze zur unternehmerischen Zielbildung gewinnen im Zusammenhang mit dem aktuellen betriebswirtschaftlichen Forschungsfeld ‚Compliance‘ in Theorie und Praxis eine neue Bedeutung. N2 - The finding and setting of a business target is the starting point whenever dealing with corporate governance; the autonomy of companies to define those targets is one constitutive characteristic of any market economy. Regulatory demands as the standardization of the German ‘Unternehmensinteresse’ (interest of the company) in the German stock corporation laws as well as ethical-theoretical approaches in the process of forming targets gain relevance both in theory and practice in the context of the field of research called ‘Compliance’. T3 - Forschungsberichte des Fachbereichs Wirtschaftswissenschaften der Hochschule Düsseldorf - 26 KW - Unternehmensführung KW - Unternehmensziele KW - Zielsetzung KW - Unternehmensinteresse KW - Compliance KW - Russland KW - Wirtschaftsbeziehungen KW - Corporate Governance KW - Business Targets KW - Targetsetting KW - Interest of the Company KW - FHD KW - Russia KW - Economic Relation Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-8516 N1 - Dies ist der dritte von insg. sechs Beiträgen in Bleuel, Hans-H. (Hrsg.): Ausgewählte Themen zu den deutsch-russischen Wirtschaftsbeziehungen. Düsseldorf, 2014. Erster / früherer Titel der Reihe: Forschungsberichte des Fachbereichs Wirtschaft der Fachhochschule Düsseldorf bis 2014 VL - Version 1 IS - 26 CY - Düsseldorf ER - TY - RPRT A1 - Albers, Felicitas G. ED - Bleuel, Hans-H. T1 - Unternehmensziele und Compliance BT - Business Targets and Compliance N2 - Die unternehmerische Zielfindung und Zielsetzung ist Ausgangspunkt jeder Befassung mit Fragen der Unternehmensführung, die Zielautonomie der Unternehmen konstitutives Merkmal einer marktwirtschaftlichen Ordnung. Regulierende Vorgaben, wie die Normierung des ‚Unternehmensinteresses‘ im deutschen Aktienrecht sowie ethisch-normative theoretische Ansätze zur unternehmerischen Zielbildung gewinnen im Zusammenhang mit dem aktuellen betriebswirtschaftlichen Forschungsfeld ‚Compliance‘ in Theorie und Praxis eine neue Bedeutung. N2 - The finding and setting of a business target is the starting point whenever dealing with corporate governance; the autonomy of companies to define those targets is one constitutive characteristic of any market economy. Regulatory demands as the standardization of the German ‘Unternehmensinteresse’ (interest of the company) in the German stock corporation laws as well as ethical-theoretical approaches in the process of forming targets gain relevance both in theory and practice in the context of the field of research called ‘Compliance’. T3 - Forschungsberichte des Fachbereichs Wirtschaftswissenschaften der Hochschule Düsseldorf - 26(v2) KW - Compliance KW - Russland KW - FHD KW - Unternehmensführung KW - Unternehmensinteresse KW - Wirtschaftsbeziehungen KW - Corporate Governance KW - Business Targets KW - Targetsetting KW - Interest of the Company Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-36611 N1 - Dies ist der dritte von insg. sechs Beiträgen in Bleuel, Hans-H. (Hrsg.): Ausgewählte Themen zu den deutsch-russischen Wirtschaftsbeziehungen. Düsseldorf, 2014. Erster / früherer Titel der Reihe: Forschungsberichte des Fachbereichs Wirtschaft der Fachhochschule Düsseldorf bis 2014 VL - Version 2 CY - Düsseldorf ER - TY - RPRT A1 - Albers, Felicitas G. A1 - Pagel, Sven A1 - Peters, Horst ED - Kalmring, Dirk T1 - Wahrnehmung und Image der Rheinbahn AG im Bewusstsein der Öffentlichkeit T1 - Public perception and image of Rheinbahn N2 - Die Fachhochschule Düsseldorf hat im Auftrag der Rheinbahn AG, Betreiber der städtischen Bahnen und Busse in Düsseldorf und umliegender Region, die Studie „Wahrnehmung und Image der Rheinbahn AG im Bewusstsein der Öffentlichkeit“ durchgeführt. Die Ergebnisse der Studie stützen sich auf insgesamt ca. 2400 telefonische und schriftliche Befragungen im Zeitraum zwischen November 2007 und November 2008. Zwei Fragenkomplexe stehen im Vordergrund der Untersuchung: "Welches differenzierte Image hat das Angebot der Rheinbahn in den Köpfen der Zielgruppen?" und "Welche Schlussfolgerungen ziehen die Gutachter aus diesen Befunden im Hinblick auf eine positive Beeinflussung des Images der Rheinbahn?" Der vorliegende Forschungsbericht dokumentiert die Ergebnisse der empirischen Untersuchung und enthält die gutachterliche Stellungnahme der mit der Durchführung der Studie beauftragten Autoren. N2 - Fachhochschule Düsseldorf was commissioned by Rheinbahn AG, operator of local trains and buses in and around Düsseldorf, to conduct a survey entitled "Public Perception and Image of the Rheinbahn". The results of the survey are based on a total of about 2400 entries submitted by telephone and in writing, collected between November 2007 and November 2008. Two sets of questions were eminent in the survey: "What differenciated image does Rheinbahns offering have in the minds of the target groups?" and "What conclusion do experts draw from these results with regard to positively influencing Rheinbahns image?" This research report documents the results of the empirical survey and includes the expert opinion of the authors commissioned to conduct the survey. T3 - Forschungsberichte des Fachbereichs Wirtschaftswissenschaften der Hochschule Düsseldorf - 10 KW - Öffentlicher Personennahverkehr KW - ÖPNV KW - Rheinbahn AG KW - Image KW - Public transport KW - FHD KW - Image Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-5303 N1 - Erster / früherer Titel der Reihe: Forschungsberichte des Fachbereichs Wirtschaft der Fachhochschule Düsseldorf bis 2014 EP - 10 CY - Düsseldorf ER - TY - JOUR A1 - Ali, R. A1 - Farooq, A. A1 - Shahzad, A. A1 - Benim, Ali Cemal A1 - Iqbal, A. A1 - Razzaq, M. T1 - Computational approach on three-dimensional flow of couple-stress fluid with convective boundary conditions JF - Physica A: Statistical Mechanics and its Applications Y1 - 2022 U6 - https://doi.org/10.1016/j.physa.2019.124056 SN - 0378-4371 VL - 553 PB - Elsevier ER - TY - JOUR A1 - Anders, Denis A1 - Weinberg, Kerstin A1 - Reichardt, Roland T1 - Isogeometric analysis of thermal diffusion in binary blends JF - Computational Materials Science Y1 - 2012 U6 - https://doi.org/10.1016/j.commatsci.2011.01.008 VL - 52 IS - 1 SP - 182 EP - 188 PB - Elsevier ER - TY - CHAP A1 - Andrukaniec, Edward A1 - Franken, Carmen A1 - Kirchhof, Daniel A1 - Kraus, Tobias A1 - Schöndorff, Fabian A1 - Geiger, Christian ED - Reidsma, Dennis ED - Katayose, Haruhiro ED - Nijholt, Anton T1 - OUTLIVE – An Augmented Reality Multi-user Board Game Played with a Mobile Device T2 - Advances in Computer Entertainment. 10th International Conference, ACE 2013, Boekelo, The Netherlands, November 12-15, 2013. Proceedings Y1 - 2013 SN - 978-3-319-03160-6 U6 - https://doi.org/10.1007/978-3-319-03161-3_38 VL - 8253 SP - 501 EP - 504 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Anglada-Tort, Manuel A1 - Masters, Nikhil A1 - Steffens, Jochen A1 - North, Adrian A1 - Müllensiefen, Daniel T1 - The Behavioural Economics of Music: Systematic review and future directions JF - Quarterly Journal of Experimental Psychology N2 - Music-related decision-making encompasses a wide range of behaviours including those associated with listening choices, composition and performance, and decisions involving music education and therapy. Although research programmes in psychology and economics have contributed to an improved understanding of music-related behaviour, historically, these disciplines have been unconnected. Recently, however, researchers have begun to bridge this gap by employing tools from behavioural economics. This article contributes to the literature by providing a discussion about the benefits of using behavioural economics in music-decision research. We achieve this in two ways. First, through a systematic review, we identify the current state of the literature within four key areas of behavioural economics-heuristics and biases, social decision-making, behavioural time preferences, and dual-process theory. Second, taking findings of the literature as a starting point, we demonstrate how behavioural economics can inform future research. Based on this, we propose the Behavioural Economics of Music (BEM), an integrated research programme that aims to break new ground by stimulating interdisciplinary research in the intersection between music, psychology, and economics. Y1 - 2022 SN - 1747-0218 U6 - https://doi.org/10.1177/17470218221113761 SN - 1747-0226 VL - 76 IS - 5 PB - SAGE ER - TY - CHAP A1 - Anthrakidis, Anette A1 - Faber, Christian A1 - Krokerm M, A1 - Lanz, Marco A1 - Backes, Klaus A1 - Adam, Mario A1 - Dreher, Martina A1 - Schramm, Sebastian T1 - Solare Prozesswärmestandards - Konzeptionierung, Aufbau und wissenschaftliche Begleitung einer Pilotanlage T2 - 20. OTTI Symposium Thermische Solarenergie, 05.-07.05.2010, Bad Staffelstein KW - Solare-Prozesswärme-Standards Y1 - 2010 CY - Bad Staffelstein ER - TY - CHAP A1 - Ardelean-Baidoc, Raluca A1 - Oniga, Gabriel A1 - Niemann, Jörg A1 - Sava, Adriana A1 - Pîslă, Adrian A1 - (Keine Angabe), T1 - Change Management Aspects in Developing the International Airport “Avram Iancu” Cluj T2 - The proceedings of the 14th European Conference on Innovation and Entrepreneurship, 19-20 September 2019 Y1 - 2019 SN - 9781912764358 U6 - https://doi.org/10.34190/ECIE.19.092 PB - ACPI ER - TY - CHAP A1 - Askari, Sima Ipakchian A1 - Huldtgren, Alina A1 - IJsselsteijn, Wijnand ED - Bamidis, P.D. ED - Ziefle, M. ED - Maciaszek, L. T1 - Wear it or fear it: exploration of drivers & barriers in smartwatch acceptance by senior citizens T2 - Proceedings of the 4th International Conference on Information and Communication Technologies for Ageing Well and e-Health,IC T4AWE - Volume 1, 26-36, 2018, Funchal, Madeira, Portugal KW - Assistive Technology KW - Seniors KW - Smartwatches KW - Technology Acceptance KW - Wearables Y1 - 2018 SN - 978-989-758-299-8 U6 - https://doi.org/10.5220/0006673000260036 SP - 26 EP - 36 PB - SciTePress Digital Library ER - TY - JOUR A1 - Aslan, Erman A1 - Nahavandi, A. A1 - Taymaz, I. A1 - Benim, Ali Cemal T1 - A note on modelling non-rectangular boundaries by the Lattice Boltzmann Method JF - Progress in Computational Fluid Dynamics, An International Journal Y1 - 2012 U6 - https://doi.org/10.1504/pcfd.2012.049815 VL - 12 IS - 6 SP - 433 EP - 438 PB - inderscience ER - TY - JOUR A1 - Aslan, Erman A1 - Taymaz, Imdat A1 - Benim, Ali Cemal T1 - Investigation of LBM curved boundary treatments for unsteady flows JF - European Journal of Mechanics - B/Fluids Y1 - 2015 U6 - https://doi.org/10.1016/j.euromechflu.2015.01.004 VL - 51 SP - 68 EP - 74 PB - Elsevier ER - TY - BOOK A1 - Attia, Iman A1 - Häusler, Alexander A1 - Shooman, Yasemin T1 - Antimuslimischer Rassismus am rechten Rand KW - Forena Y1 - 2014 SN - 9783897711280 VL - Unrast transparent Rechter Rand,14 PB - Unrast-Verl. CY - Münster ET - 2, korr. Aufl. ER - TY - RPRT A1 - Auth, Diana A1 - Dierkes, Mirjam A1 - Leiber, Simone A1 - Leitner, Sigrid T1 - Reconciling employment and elderly care within the "adult worker model": typical arrangements of caring sons N2 - Reconciling work and family life is one of the main issues of welfare state policies in the fields of childcare and long-term care. On that account, policy and research are focused almost exclusively on women – often on the reconciliation of work and childbearing – and social policy at the state level. In our study, we concentrate on men who reconcile gainful employment with elderly care, and we include the company level – a level of analysis often neglected in traditional theoretical approaches and typologies of comparative welfare state research. In Germany, during the last decade, the share of sons who are responsible for taking care of their elderly relatives has remarkably increased. In our qualitative research, we carried out comparative case studies in eleven German companies. We conducted around 60 interviews with male employees caring for an elderly relative, as well as with members of the works councils and human resources departments in different kinds of companies. We analysed which familial, social, professional, legal as well as occupational resources are central for these men, how they cope with reconciling work and care, and which gaps in the welfare system they identify. Interestingly, the overwhelming majority of the caring sons claim not to have problems in reconciling work and care, although they spend significant time on caring. In this paper we try to explain this pattern by looking at their typical care arrangements. We found that while women tend to organise employment around care, men rather seem to organise care around their employment. Given the feminist critique of the “adult worker model” this is an interesting result and needs theoretical reflection. Do men have the solution to the care-blindness of the “adult worker model” without falling into the “cold modern model of care”? Which resources are mainly used in “adult worker care arrangements”? Where are the limits of the approach? N2 - Die Vereinbarkeit von Erwerbstätigkeit und Sorgearbeit ist ein wichtiges Handlungsfeld wohlfahrtsstaatlicher Politik. Vorhandene Studien nehmen dabei vorwiegend die Vereinbarkeit von Kindererziehung und Beruf durch Frauen in den Blick, und betrachten überwiegend staatliche Politiken. In dieser Studie geht es um Männer, die erwerbstätig sind und gleichzeitig pflegen. Wir beziehen dabei auch die betriebliche Ebene ein, eine Analyseperspektive, die in den theoretischen Ansätzen und Typologien der vergleichenden Wohlfahrtsstaatsforschung eher vernachlässigt wird. In Deutschland ist der Anteil der pflegenden Söhne in den letzten Jahren deutlich angestiegen. In unserer qualitativen Studien haben wir elf Betriebsfallstudien in deutschen Unternehmen durchgeführt und dabei rund 60 Interviews mit erwerbstätigen, pflegenden Männern sowie betrieblichen Interessenvertretungen der Beschäftigten und Personalabteilungen von Unternehmen geführt. Im Zentrum standen dabei betriebliche, familiäre, soziale und rechtliche Ressourcen der pflegenden Männer, deren Bewältigungsmuster bei der Vereinbarkeit von Pflege und Beruf sowie von ihnen identifizierte Lücken des wohlfahrtsstaatlichen Systems. Die überwiegende Mehrheit der pflegenden Söhne gibt dabei an, keine Vereinbarkeitsprobleme zu haben, obwohl sie beträchtliche Zeit mit den unterstützenden und pflegerischen Aufgaben verbringen. Im Aufsatz versuchen wir diesem Puzzle nachzugehen, indem wir typische Pflegearrangements herausarbeiten. Es zeigt sich, dass die hier untersuchten Söhne in der Regel die Pflege um ihre (Vollzeit-)Erwerbstätigkeit herum organisieren, während Frauen ihre Erwerbstätigkeit tendenziell nach der Pflege ausrichten. Vor dem Hintergrund der feministischen Kritik am "adult worker model" wird dies näher diskutiert: Haben die Männer etwa eine Lösung für die Blindheit des "adult workel models" für Sorgearbeit, ohne ins "cold modern model of care" zu verfallen? Welche Ressourcen werden in "adult worker care arrangements" vor allem genutzt? Wo liegen Grenzen dieses Ansatzes? T3 - Studies in Social Sciences and Culture. Aus der Forschung des Fachbereichs Sozial- und Kulturwissenschaften der HSD - 2 KW - Angehörigenpflege KW - Vereinbarkeit Pflege und Beruf KW - pflegende Männer KW - elderly care KW - reconciliation of work and care KW - caring men Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-10459 SN - 2509-6958 CY - Düsseldorf ER - TY - JOUR A1 - Auth, Diana A1 - Leiber, Simone A1 - Leitner, Sigrid T1 - Sozialpolitik als Instrument der Geschlechtergerechtigkeit JF - Gruppendynamik und Organisationsberatung Y1 - 2011 U6 - https://doi.org/10.1007/s11612-011-0147-6 N1 - PII: 147 VL - 42 IS - 2 SP - 151 EP - 162 PB - Springer ER - TY - RPRT A1 - Auth, Gunnar A1 - Bauer, Hans-Jörg A1 - Bestenlehner, Matthias A1 - Felbecker, Heribert A1 - Hartmann, Andreas A1 - von der Heyde, Markus A1 - Klapper, Frank A1 - Lorenz, Sören A1 - Maly, Rudolf A1 - Mohren, Henning A1 - Peter, Gerhard A1 - Prill, Torsten A1 - Springer, Günter A1 - Weithofer, Irene T1 - Treiben oder getrieben werden? IT-Strategie in Hochschulen Y1 - 2012 UR - https://zki2.rz.tu-ilmenau.de/fileadmin/zki/Arbeitskreise/IT-SF/webdav/web-public/Publikation/EndredaktionPapier_120130-final.pdf CY - Heilbronn ER - TY - CHAP A1 - Ayten, Hüseyin A1 - Herder, Jens A1 - Vonolfen, Wolfgang T1 - Visual Acceptance Evaluation of Soft Shadow Algorithms for Virtual TV Studios T2 - HC '10 Proceedings of the 13th International Conference on Humans and Computers N2 - Shadows in computer graphics are an important rendering aspect for spatial objects. For realtime computer applications such as games, it is essential to represent shadows as accurate as possible. Also, various tv stations work with virtual studio systems instead of real studio sets. Especially for those systems, a realistic impression of the rendered and mixed scene is important. One challenge, hence, is the creation of a natural shadow impression. This paper presents the results of an empirical study to compare the performance and quality of different shadow mapping methods. For this test, a prototype studio renderer was developed. A percentage closer filter (pcf) with a number of specific resolutions is used to minimize the aliasing issue. More advanced algorithms which generate smooth shadows like the percentage closer soft shadow (pcss) method as well as the variance shadow maps (vsm) method are analysed. Different open source apis are used to develop the virtual studio renderer, giving the benefit of permanent enhancement. The Ogre 3D graphic engine is used to implement the rendering system, benefiting from various functions and plugins. The transmission of the tracking data is accomplished with the vrpn server/client and the Intersense api. The different shadow algorithms are compared in a virtual studio environment which also casts real shadows and thus gives a chance for a direct comparison throughout the empirical user study. The performance is measured in frames per secon KW - Virtual (TV) Studio KW - soft shadow KW - realtime rendering KW - augmented reality KW - algorithmus KW - FHD KW - experimentation KW - verification KW - VSVR Y1 - 2010 UR - https://dl.acm.org/citation.cfm?id=1994505 SP - 66 EP - 71 PB - University of Aizu Press CY - Aizu-Wakamatsu ER - TY - GEN A1 - Backes, Klaus A1 - Adam, Mario T1 - KWKK-Anlagen im Feldtest (Teil 1) T2 - SHT Sanitär + Heizungstechnik KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW Y1 - 2012 SN - 0036-4401 VL - 77 IS - 3 SP - 40 EP - 44 PB - Krammer ER - TY - GEN A1 - Backes, Klaus A1 - Adam, Mario T1 - KWKK-Anlagen im Feldtest (Teil 2) T2 - SHT Sanitär + Heizungstechnik KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW Y1 - 2012 SN - 0036-4401 VL - 77 IS - 4 SP - 50 EP - 53 PB - Kramer ER - TY - GEN A1 - Backes, Klaus A1 - Adam, Mario A1 - Gottschald, Jonas T1 - KWKK-Anlagen im Feldtest. Optimaler Betrieb durch Verbesserungen bei Regelung und Hydraulik T2 - KK Die Kälte + Klimatechnik KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW - 2 Y1 - 2012 SN - 0343-2246 VL - 65 IS - 3 SP - 20 EP - 27 PB - Alfons W. Gentner Verlag ER - TY - CHAP A1 - Backes, Klaus A1 - Adam, Mario A1 - Gottschald, Jonas A1 - Faber, Christian A1 - Henneböhl, Fred. A1 - Lanz, Marco A1 - Anthrakidis, Anette T1 - KWKK-Anlagen im Feldtest: Verbesserung ihrer Regelung und Hydraulik T2 - Deutsche Kälte-Klima-Tagung 2011, 16.-18.11.2011, Aachen KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW - 2 Y1 - 2011 UR - https://zies.hs-duesseldorf.de/forschung-und-entwicklung/erneuerbare-energien/Projekte_e2/Documents/KWKK2.pdf CY - Aachen ER - TY - CHAP A1 - Backes, Klaus A1 - Adam, Mario A1 - Wirth, Hans Peter A1 - Götzelmann, Dennis A1 - Helbig, Sonja A1 - Eggert, Daniel ED - Häberle, Andreas T1 - Efficient Design of Solar Assisted Heating Systems for Multi-Family Houses T2 - Proceedings of EuroSun 2018, 12th International Conference on Solar Energy for Buildings and Industry, 10.-13.09.2018, Rapperswil / Switzerland, International Solar Energy Society KW - SUW-MFH Y1 - 2018 SN - 978-3-9820408-0-6 U6 - https://doi.org/10.18086/eurosun2018.01.02​ SP - 1 EP - 9 PB - International Solar Energy Society CY - Freiburg ER - TY - CHAP A1 - Backes, Klaus A1 - Faber, Christian A1 - Anthrakidis, Anette A1 - Ille, Fabian A1 - Adam, Mario A1 - Schramm, Sebastian T1 - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW mit periodisch arbeitender Sorptionsmaschine T2 - World Sustainable Energy Days 2008, 5-7. März, Wels KW - Solare-Prozesswärme-Standards Y1 - 2008 CY - Wels ER - TY - CHAP A1 - Backes, Klaus A1 - Faber, Christian A1 - Anthrakidis, Anette A1 - Ille, Fabian A1 - Adam, Mario A1 - Schramm, Sebastian ED - WREN, T1 - A small scale Combined Cooling, Heating and Power System T2 - World Renewable Energy Congress X and Exhibition, 19-25.07.2008, Glasgow KW - Kraft-Wärme-Kälte-Kopplung im Leistungsbereich von 10 kW Y1 - 2008 CY - Glasgow ER - TY - JOUR A1 - Baekler, Peter A1 - Hehl, Friedrich W. T1 - Beyond Einstein–Cartan gravity: quadratic torsion and curvature invariants with even and odd parity including all boundary terms JF - Classical and Quantum Gravity Y1 - 2011 U6 - https://doi.org/10.1088/0264-9381/28/21/215017 VL - 28 IS - 21 PB - IOP ER - TY - JOUR A1 - Baekler, Peter A1 - Hehl, Friedrich W. T1 - ROTATING BLACK HOLES IN METRIC-AFFINE GRAVITY JF - International Journal of Modern Physics D Y1 - 2006 U6 - https://doi.org/10.1142/s0218271806008589 VL - 15 IS - 5 SP - 635 EP - 668 PB - World Scientific ER - TY - JOUR A1 - Baekler, Peter A1 - Hehl, Friedrich W. A1 - Nester, James M. T1 - Poincaré gauge theory of gravity: Friedman cosmology with even and odd parity modes: Analytic part JF - Physical Review D Y1 - 2011 U6 - https://doi.org/10.1103/physrevd.83.024001 VL - 83 IS - 2 PB - APS ER - TY - JOUR A1 - Baier, André A1 - Neef, Matthias T1 - Studierende lehren und lernen sozial-ökologische Verantwortung JF - Die Neue Hochschule KW - Verantwortung Y1 - 2019 VL - 60 IS - 5 SP - 8 EP - 11 ER - TY - CHAP A1 - Ballester Ripoll, Marina A1 - Herder, Jens A1 - Ladwig, Philipp A1 - Vermeegen, Kai ED - Pfeiffer, Thies ED - Fröhlich, Julia ED - Kruse, Rolf T1 - Comparison of two Gesture Recognition Sensors for Virtual TV Studios T2 - GI-VRAR, Workshop Proceedings / Tagungsband: Virtuelle und Erweiterte Realität – 13. Workshop der GI-Fachgruppe VR/AR, N2 - In order to improve the interactivity between users and computers, recent technologies focus on incorporating gesture recognition into interactive systems. The aim of this article is to evaluate the effectiveness of using a Myo control armband and the Kinect 2 for recognition of gestures in order to interact with virtual objects in a weather report scenario. The Myo armband has an inertial measurement unit and is able to read electrical activity produced by skeletal muscles, which can be recognized as gestures, which are trained by machine learning. A Kinect sensor was used to build up a dataset which contains motion recordings of 8 different gestures and was also build up by a gesture training machine learning algorithm. Both input methods, the Kinect 2 and the Myo armband, were evaluated with the same interaction patterns in a user study, which allows a direct comparison and reveals benefits and limits of each technique. KW - Gesture recognition KW - Interaction KW - Kinect KW - Myo KW - Virtual (TV) Studio KW - Lehre Y1 - 2016 UR - http://vsvr.medien.hs-duesseldorf.de/publications/gi-vrar2016-gesture-abstract.html SN - 978-3-8440-4718-9 PB - Shaker Verlag CY - Herzogenrath ER - TY - CHAP A1 - Baranowski, Artur A1 - Utzig, Sebastian A1 - Fischer, Philipp A1 - Gerndt, Andreas A1 - Herder, Jens ED - Herder, Jens ED - Geiger, Christian ED - Dörner, Ralf ED - Grimm, Paul T1 - 3D spacecraft configuration using immersive AR technology T2 - Workshop Proceedings / Tagungsband: Virtuelle und Erweiterte Realität – 15. Workshop der GI-Fachgruppe VR/AR N2 - In this paper we propose an integrated immersive augmented reality solution for a software tool supporting spacecraft design and verification. The spacecraft design process relies on expertise in many domains, such as thermal and structural engineering. The various subsystems of a spacecraft are highly interdependent and have differing requirements and constraints. In this context, interactive visualizations play an important role in making expert knowledge accessible. Recent immersive display technologies offer new ways of presenting and interacting with computer-generated content. Possibilities and challenges for spacecraft configuration employing these technologies are explored and discussed. A user interface design for an application using the Microsoft HoloLens is proposed. To this end, techniques for selecting a spacecraft component and manipulating its position and orientation in 3D space are developed and evaluated. Thus, advantages and limitations of this approach to spacecraft configuration are revealed and discussed. KW - spacecraft configuration KW - human computer interaction KW - augmented reality KW - 3D user interfaces KW - HoloLens Y1 - 2018 UR - http://vsvr.medien.hs-duesseldorf.de/publications/gi-vrar2018-ar-space/ SN - 978-3-8440-6215-1 U6 - https://doi.org/10.2370/9783844062151 SP - 71 EP - 82 PB - Shaker Verlag CY - Herzogenrath ER - TY - JOUR A1 - Basaran, Anil A1 - Benim, Ali Cemal A1 - Yurddas, Ali T1 - Prediction of heat and fluid flow in microchannel condensation JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27768 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Basaran, Anil A1 - Benim, Ali Cemal A1 - Yurddas, Ali T1 - Numerical Simulation of the Condensation Flow of the Isobutane (R600a) inside Microchannel JF - Heat Transfer Engineering Y1 - 2021 U6 - https://doi.org/10.1080/01457632.2021.1874668 SN - 0145-7632 VL - 43 IS - 3-5 SP - 337 EP - 361 PB - Taylor & Francis ER - TY - GEN A1 - Bauer, Lena A1 - Marmann, Michael T1 - Was ist eigentlich ein "UnSeminar": Interview mit Prof. Marmann vom 10.11.2017 N2 - Was ist eigentlich ein "UnSeminar"? Prof. Marmann aus dem Fachbereich Medien der Hochschule Düsseldorf erklärt in einem Interview mit dem Hochschulradio Düsseldorf​ sein Konzept für die Durchführung von Seminaren, das den Teilnehmerinnen und Teilnehmern sehr viel Freiheit in der (digitalen) Ausgestaltung der Themen bietet. In Anlehnung an das Barcamp-Format, das auch "Unkonferenz" genannt wird, werden die Seminarthemen erst im Verlauf der Veranstaltung und durch Teilnehmenden entwickelt. Hierzu dienen mehrere Feedbackschleifen. Darüber hinaus kommen in den Unseminaren verschiedene digitale Technologien zur Organisation, zur Kommunikation und zur Kreation zum Einsatz, um en passant auch die Digitalkompetenz der Studierenden weiterzuentwickeln. So ist z.B. ein Multimedia-Abstract Bestandteil eines jeden Seminarbeitrages und die Seminarbeiträge selbst werden mit einem typischen Blogsystem ausgearbeitet. Alle Beiträge sind innerhalb des Fachbereichs für interessierte Studierende einsehbar, so dass Studierende auch von Kommilitonen lernen können. ​ KW - Interview KW - Agilität KW - Digitale Lehre Y1 - 2017 UR - http://hochschulradio.de/insider-am-freitag-10-november/ PB - Hochschule Düsseldorf CY - Düsseldorf ER - TY - RPRT A1 - Baur, Jonas A1 - Focken, Mareike ED - Rakow, Thomas T1 - Literaturrecherche zum Einsatz offener digitaler Lehr- und Lernmaterialien T1 - Literature research on the use of open digital teaching and learning materials N2 - In dieser Arbeit werden die definierenden Eigenschaften von Open Educational Resources (OER) recherchiert. Wie können die Anforderungen an Inhalten, Medien-wahl, didaktischen Konzept mit einem hohen Grad an Interaktivität erfüllt werden? – Die Literatur zu diesen Fragestellungen liefert den aktuellen Forschungsstand. N2 - In this work the defining properties of Open Educational Resources (OER) are researched. How can the requirements for content, media choice, didactic concept be met with a high degree of interactivity? - The literature on these questions provides the current state of research. KW - Open Educational Resource KW - Higher Education KW - Creative Commons KW - Metadaten KW - OEP KW - Open Educational Practices KW - Höhere Bildung KW - OER KW - Hg_TCR Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-33724 VL - Arbeitspapier des Lehrgebiets Datenbanken und E-Business, No. 3/2021 CY - Düsseldorf ER - TY - JOUR A1 - Bayer, Markus A1 - Pabst, Andrea T1 - Heroes and victims: economies of entitlement after violent pasts JF - Peacebuilding Y1 - 2018 U6 - https://doi.org/10.1080/21647259.2017.1303868 N1 - The research for the article was conducted as part of the project ‘Nonviolent Resistance and Democratic Consolidation’ funded by the German Research Foundation. We would like to thank Benjamin T. Shannon, Peter Finkenbusch, Felix Bethke, Daniel Lambach and the two anonymous reviewers for commenting and editing. VL - 6 IS - 1 SP - 49 EP - 64 PB - Taylor & Francis ER - TY - CHAP A1 - Becker, Martin A1 - Lippel, Jens A1 - Stuhlsatz, André T1 - Regularized Nonlinear Discriminant Analysis - An Approach to Robust Dimensionality Reduction for Data Visualization T2 - Proceedings of the 12th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications, 27.02.2017 - 01.03.2017, Porto, Portugal Y1 - 2017 SN - 978-989-758-228-8 U6 - https://doi.org/10.5220/0006167501160127 SP - 116 EP - 127 PB - SCITEPRESS - Science and Technology Publications ER - TY - JOUR A1 - Becker, Martin A1 - Lippel, Jens A1 - Stuhlsatz, André A1 - Zielke, Thomas T1 - Robust dimensionality reduction for data visualization with deep neural networks JF - Graphical Models Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-26904 SN - 1524-0703 VL - 108 PB - Elsevier ER - TY - CHAP A1 - Becker, Martin A1 - Lippel, Jens A1 - Zielke, Thomas ED - Vezzani, Roberto T1 - Dimensionality Reduction for Data Visualization and Linear Classification, and the Trade-off between Robustness and Classification Accuracy T2 - Proceedings of ICPR 2020: 25th International Conference on Pattern Recognition, 10-15 January 2021, Milan Y1 - 2021 SN - 978-1-72818-808-9 U6 - https://doi.org/10.1109/ICPR48806.2021.9412865 SP - 6478 EP - 6485 PB - IEEE CY - Piscataway, NJ ER - TY - CHAP A1 - Becker, Martin A1 - Lippel, Jens A1 - Zielke, Thomas T1 - Gradient Descent Analysis: On Visualizing the Training of Deep Neural Networks T2 - VISIGRAPP 2019: Proceedings of the 14th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications : Prague, Czech Republic, February 25-27, 2019 Y1 - 2019 SN - 978-989-758-354-4 U6 - https://doi.org/10.5220/0007583403380345 VL - Volume: 3 SP - 338 EP - 345 PB - INSTICC ER - TY - CHAP A1 - Becker, Thomas A1 - Herder, Jens T1 - Cost effective tangibles using fiducials for infrared multi-touch frames T2 - 15th International Conference on Human and Computer N2 - The late immersion of multi-touch sensitive displays enables the use of tangibles on multi-touch screens. There a several wide spread and/or sophisticated solutions to fulfill this need but they seem to have some flaws. One popular system at the time of writing is an overlay frame that can be placed on a normal display with the corresponding size. The frame creates a grid with infrared light emitting diodes. The disruption of this grid can be detected and messages with the positions are sent via usb to a connected computer. This system is quite robust in matters of ambient light insensitivity and also fast to calibrate. Unfortunately it is not created with the recognition of tangibles in mind and printed patterns can not be resolved. This article summarizes an attempt to create fiducials that are recognized by an infrared multi-touch frame as fingers. Those false fingers are checked by a software for known patterns. Once a known pattern (= fiducial) has been recognized its position and orientation are send with the finger positions towards the interactive software. The usability is tested with an example application where tangibles and finger touches are used in combination. KW - low cost multi-touch infrared overlay frame KW - fiducial tangible recognition KW - FHD Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-16011 UR - http://vsvr.medien.hs-duesseldorf.de/publications/hc2012-fiducials-abstract.html N1 - Copyright 2012 University of Aizu Press CY - Hamamatsu/Aizu-Wakamatsu/Duesseldorf ER - TY - CHAP A1 - Beckers, Sebastian A1 - Pawlik, Julian A1 - Kiel, Jürgen A1 - Grote, Wolfgang T1 - Simulation von Partikelflugbahnen zur Auslegungshilfe von elektrostatischen Luftfiltern T2 - Tagungsband: ASIM Workshop 2019 - Simulation Technischer Systeme Grundlagen und Methoden in Modellbildung und Simulation, 21.-22. Februar 2019, Braunschweig Y1 - 2019 SN - 978-3-901608-06-3 U6 - https://doi.org/10.11128/arep.57 SP - 147 EP - 152 PB - ARGESIM, ASIM CY - Wien ER - TY - CHAP A1 - Begemann, Maik-Carsten A1 - Bleck, Christian A1 - Liebig, Reinhard ED - Begemann, Maik-Carsten ED - Bleck, Christian ED - Liebig, Reinhard T1 - Empirische Wirkungsforschung zur Kinder- und Jugendhilfe. Konzeptionelle Vorüberlegungen und Einführung in den Sammelband T2 - Wirkungsforschung zur Kinder- und Jugendhilfe Y1 - 2019 SN - 9783779937746 SP - 7 EP - 20 PB - Beltz Juventa CY - Weinheim; Basel ER - TY - CHAP A1 - Begemann, Maik-Carsten A1 - Liebig, Reinhard A1 - Bleck, Christian ED - Begemann, Maik-Carsten ED - Bleck, Christian ED - Liebig, Reinhard T1 - Wirkungsforschung zur Kinder- und Jugendhilfe - Versuch einer Bilanzierung T2 - Wirkungsforschung zur Kinder- und Jugendhilfe Y1 - 2019 SN - 9783779937746 SP - 292 EP - 313 PB - Beltz Juventa CY - Weinheim; Basel ER - TY - JOUR A1 - Behbehani, Sami A1 - Steffens, Jochen T1 - Musical DIAMONDS: The influence of situational classes and characteristics on music listening behavior JF - Psychology of Music Y1 - 2021 U6 - https://doi.org/10.1177/0305735620968910 SN - 1741-3087 VL - 49 IS - 6 SP - 1532 EP - 1545 PB - sage journals ER - TY - JOUR A1 - Benim, Ali Cemal T1 - Numerical Calculation of Sink Velocities for Helminth Eggs in Water JF - Computation N2 - The settling velocities of helminth eggs of three types, namely Ascaris suum (ASC), Trichuris suis (TRI), and Oesophagostomum spp. (OES), in clean tap water are computationally determined by means of computational fluid dynamics, using the general-purpose CFD software ANSYS Fluent 18.0. The previous measurements of other authors are taken as the basis for the problem formulation and validation, whereby the latter is performed by comparing the predicted sink velocities with those measured in an Owen tube. To enable a computational treatment, the measured shapes of the eggs are parametrized by idealizing them in terms of elementary geometric forms. As the egg shapes show a variation within each class, “mean” shapes are considered. The sink velocities are obtained through the computationally obtained drag coefficients. The latter are defined by means of steady-state calculations. Predicted sink velocities are compared with the measured ones. It is observed that the calculated values show a better agreement with the measurements, for ASC and TRI, compared to the theoretical sink values delivered by the Stokes theory. However, the observed agreement is still found not to be very satisfactory, indicating the role of further parameters, such as the uncertainties in the characterization of egg shapes or flocculation effects even in clean tap water. KW - Applied Mathematics KW - Modeling and Simulation KW - General Computer Science KW - Theoretical Computer Science KW - DOAJ Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-37318 SN - 2079-3197 VL - 9 IS - 12 PB - MDPI ER - TY - JOUR A1 - Benim, Ali Cemal T1 - Introducing the “Mathematical Modelling and Numerical Simulation of Combustion and Fire” Section of the Journal Fire JF - fire Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-40257 SN - 2571-6255 VL - 5 IS - 6 PB - MDPI ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Canal, Cansu Deniz A1 - Boke, Yakup Erhan T1 - A Validation Study for RANS Based Modelling of Swirling Pulverized Fuel Flames JF - Energies N2 - A swirling pulverized coal flame is computationally investigated. A Eulerian–Lagrangian formulation is used to describe the two-phase flow. Turbulence is modelled within a RANS (Reynolds averaged numerical simulation) framework. Four turbulence viscosity- (TV) based models, namely the standard k-ε model, realizable k-ε model, renormalization group theory k-ε model, and the shear stress transport k-ω model are used. In addition, a Reynolds stress transport model (RSM) is employed. The models are assessed by comparing the predicted velocity fields with the measurements of other authors. In terms of overall average values, the agreement of the predictions to the measurements is observed to be within the range 20–40%. A better performance of the RSM compared to the TV models is observed, with a nearly twice as better overall agreement to the experiments, particularly for the swirl velocity. In the second part of the investigation, the resolution of the discrete particle phase in modelling the turbulent particle dispersion (TPD) and particle size distribution (SD) is investigated. Using the discrete random walk model for the TPD, it is shown that even five random walks are sufficient for an accuracy that is quite high, with a less than 1% mean deviation from the solution obtained by thirty random walks. The approximation of the measured SD is determined by a continuous Rosin–Rammler distribution function, and inaccuracies that can occur in its subsequent discretization are demonstrated and discussed. An investigation on the resolution of the SD by discrete particle size classes (SC) indicates that 12 SC are required for an accuracy with a less than 1% mean deviation from the solution with 18 SC. Although these numbers may not necessarily be claimed to be sufficiently universal, they may serve as guidance, at least for SD with similar characteristics KW - DOAJ Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-37365 SN - 1996-1073 VL - 14 IS - 21 PB - MDPI ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Canal, Cansu Deniz A1 - Boke, Yakup Erhan T1 - Computational investigation of oxy-combustion of pulverized coal and biomass in a swirl burner JF - Energy Y1 - 2022 U6 - https://doi.org/10.1016/j.energy.2021.121852 SN - 0360-5442 VL - 238 IS - C PB - Elsevier ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Cicek, Aydin A1 - Eker, Arif Mert T1 - A numerical analysis of the thermohydraulics of an EGS project in Turkey JF - MATEC Web of Conferences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27910 SN - 2261-236X VL - 240 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Cicek, Aydin A1 - Eker, Arif Mert T1 - A Computational Investigation of the Thermohydraulics of an EGS Project JF - Journal of Thermal Science Y1 - 2018 U6 - https://doi.org/10.1007/s11630-018-1033-0 SN - 1003-2169 SN - 1993-033X VL - 27 IS - 5 SP - 405 EP - 412 PB - Springer ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael T1 - Prediction of Roughness Effects on Wind Turbine Aerodynamics JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27775 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael A1 - Gül, Fethi T1 - Prediction and measurement of the aerodynamic performance of a wind turbine JF - MATEC Web of Conferences Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27925 SN - 2261-236X VL - 240 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael A1 - Gül, Fethi A1 - Oclon, Pawel A1 - Taler, Jan T1 - Computational and experimental investigation of the aerodynamics and aeroacoustics of a small wind turbine with quasi-3D optimization JF - Energy Conversion and Management Y1 - 2018 U6 - https://doi.org/10.1016/j.enconman.2018.09.042 VL - 177 SP - 143 EP - 149 PB - Elsevier ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael A1 - Nahavandi, Ali T1 - Prediction of flow and dispersion in cross–ventilated buildings JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27785 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Diederich, Michael A1 - Pfeiffelmann, Björn T1 - Aerodynamic Optimization of Airfoil Profiles for Small Horizontal Axis Wind Turbines JF - Computation KW - DOAJ Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-25143 SN - 2079-3197 VL - 6 IS - 2 PB - MDPI ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Escudier, M. P. A1 - Nahavandi, A. A1 - Nickson, A. K. A1 - Syed, K. J. A1 - Joos, F. T1 - Computational analysis of incompressible turbulent flow in an idealised swirl combustor JF - Progess in Computational Fluid Dynamics, An International Journal Y1 - 2011 U6 - https://doi.org/10.1504/pcfd.2011.037571 VL - 11 IS - 1 SP - 42 EP - 45 PB - inderscience ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Escudier, Marcel A1 - Nahavandi, Ali A1 - Nickson, A. K. A1 - Syed, Khawar J. A1 - Joos, Franz T1 - Experimental and numerical investigation of isothermal flow in an idealized swirl combustor JF - International Journal of Numerical Methods for Heat & Fluid Flow Y1 - 2010 U6 - https://doi.org/10.1108/09615531011024084 VL - 20 IS - 3 SP - 348 EP - 370 PB - Emerald ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Frank, Thiemo A1 - Assmann, Alexander A1 - Lichtenberg, Artur A1 - Akhyari, Payam T1 - Computational investigation of hemodynamics in hardshell venous reservoirs: A comparative study JF - Artificial Organs N2 - Extracorporeal circulation using heart‐lung‐machines is associated with a profound activation of corpuscular and plasmatic components of circulating blood, which can also lead to deleterious events such as systemic inflammatory response and hemolysis. Individual components used to install the extracorporeal circulation have an impact on the level of activation, most predominantly membrane oxygenators and hardshell venous reservoirs as used in extracorporeal systems. The blood flows in two different hardshell reservoirs are computationally investigated. A special emphasis is placed on the prediction of an onset of transition and turbulence generation. Reynolds‐averaged numerical simulations (RANS) based on a transitional turbulence model, as well as large eddy simulations (LES) are applied to achieve an accurate prediction. In the LES analysis, the non‐Newtonian behavior of the blood is considered via the Carreau model. Blood damage potential is quantified applying the Modified Index of Hemolysis (MIH) based on the predicted flow fields. The results indicate that the flows in both reservoirs remain predominantly laminar. For one of the reservoirs, considerable turbulence generation is observed near the exit site, caused by the specific design for the connection with the drainage tube. This difference causes the MIH of this reservoir to be nearly twice as large as compared to the alternative design. However, a substantial improvement of these performance criteria can be expected by a local geometry modification. Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-29070 SN - 1525-1594 VL - 44 IS - 4 SP - 411 EP - 418 PB - Wiley ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Gül, Fethi A1 - Assmann, Alexander A1 - Akhyari, Payam A1 - Lichtenberg, Artur A1 - Joos, Franz T1 - Validation of loss-coefficient-based outlet boundary conditions for simulating aortic flow JF - Journal of Mechanics in Medicine and Biology Y1 - 2016 U6 - https://doi.org/10.1142/s0219519416500111 VL - 16 IS - 2 PB - World Scientific ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Iqbal, Sohail A1 - Joos, Franz A1 - Wiedermann, Alexander T1 - Numerical Analysis of Turbulent Combustion in a Model Swirl Gas Turbine Combustor JF - Journal of Combustion Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-28044 SN - 2090-1968 SN - 2090-1976 VL - 2016 SP - 1 EP - 12 PB - Hindawi ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Nahavandi, A. A1 - Syed, K. J. T1 - URANS and LES analysis of turbulent swirling flows JF - Progress in Computational Fluid Dynamics, An International Journal Y1 - 2005 U6 - https://doi.org/10.1504/pcfd.2005.007680 VL - 5 IS - 8 PB - inderscience ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Ozkan, K. A1 - Cagan, M. A1 - Gunes, D. T1 - Computational investigation of turbulent jet impinging onto rotating disk JF - International Journal of Numerical Methods for Heat & Fluid Flow Y1 - 2007 U6 - https://doi.org/10.1108/09615530710730157 VL - 17 IS - 3 SP - 284 EP - 301 PB - Emerald ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn T1 - Comparison of Combustion Models for Lifted Hydrogen Flames within RANS Framework JF - Energies KW - DOAJ Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27727 SN - 1996-1073 VL - 13 IS - 1 PB - MDPI ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn T1 - Validation of Combustion Models for Lifted Hydrogen Flame JF - E3S Web of Conferences Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27815 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn T1 - Prediction of hydrogen flame propagation in a channel with exit contraction JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27806 SN - 2267-1242 VL - 128 IS - 01013 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn T1 - Prediction of burning velocity and quenching distance of hydrogen flames JF - E3S Web of Conferences KW - DOAJ Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-27790 SN - 2267-1242 VL - 128 PB - edp sciences ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Pfeiffelmann, Björn A1 - Ocłoń, Paweł A1 - Taler, Jan T1 - Computational investigation of a lifted hydrogen flame with LES and FGM JF - Energy Y1 - 2019 U6 - https://doi.org/10.1016/j.energy.2019.02.133 SN - 0360-5442 VL - 173 SP - 1172 EP - 1181 PB - Elsevier ER - TY - JOUR A1 - Benim, Ali Cemal A1 - Syed, Khawar, J., T1 - Laminar flamelet modelling of turbulent premixed combustion JF - Applied Mathematical Modelling Y1 - 1998 UR - https://doi.org/10.1016/s0307-904x(98)00012-2 U6 - https://doi.org/10.1016/s0307-904x(98)00012-2 N1 - C 1998 Elsevier Science Inc.All rights reserve VL - 22 IS - 1-2 SP - 113 EP - 136 PB - Elsevier ER - TY - JOUR A1 - Bernhardt, Anne-Julchen A1 - Leeser, Jörg T1 - NEUBAU: Flexible Self-Build Cities in Germany JF - Architectural Design Y1 - 2017 U6 - https://doi.org/10.1002/ad.2213 VL - 87 IS - 5 SP - 30 EP - 37 PB - Wiley ER - TY - RPRT A1 - Bhaiya, Madhur A1 - Jahr, Andreas A1 - Happel, Holger T1 - Harvesting-Combine-Flow Simulation Technique N2 - CFX 11.0 is a Computational Fluid Dynamics (CFD) program for simulating the behavior of systems involving fluid flow, heat transfer, and other related physical processes. It works by solving the equations of fluid flow (in a special form) over a region of interest, with specified (known) conditions on the boundary of that region. This tool is used here to analyse the straw cutter which is used to comminute the straw which is left standing in the field after stripper header has stripped the grains from the crops. Stripper Header is a new technique different to conventional harvester machines and it is still under development and testing. It works on the principle in which grains are first stripped off from the head of the standing crop which helps in much reduced intake freeing up the separation systems to handle a larger volume of grains. But with this, the new problem of the disposal of the long, uncut straw left after stripping of grains arose. So a straw cutter is used after the stripper header stage in this Combine Harvester, where the rotor is equipped with pressed steel blades and rotates towards the crop, i.e., it cuts and lifts the straw over the top. This technique is environment friendly because previously farmers would have to burn the long, uncut straw standing in the fields while in this case mulched straw can be used for min-till systems. This rotor based straw cutting machine is analysed here which helps us in increasing power efficiency and comminution rate and quality of cut straw particles. Here fluid flow simulation has been preferred over particle simulation: - CFX 10.0 tool is not very effective for particle simulation techniques and computation time is increased considerably. - It’s very hard to realize particle simulation in CFX 10.0 because we have to define size and properties of each particle and besides this wall conditions would have to be defined differently for every boundary. - Besides this, it’s hard to realize cutting effect with straw particles in CFX 10.0 which otherwise would be comminuted in real life conditions. - The results obtained from fluid simulation are validated using experimental results and found to be nearly the same which clearly contradicts any need of performing particle simulation. KW - Häckseln KW - Ernte KW - Stroh KW - Partikelstrom KW - CFD KW - chaff KW - harvesting KW - Particle flow KW - simulation KW - FHD Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-4239 CY - Düsseldorf ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Benim, Ali Cemal A1 - Chattopadhyay, Himadri A1 - Banerjee, Arnab T1 - Experimental investigation of heat transfer performance of corrugated tube with spring tape inserts JF - Experimental Heat Transfer Y1 - 2019 U6 - https://doi.org/10.1080/08916152.2018.1531955 SN - 0891-6152 VL - 32 IS - 5 SP - 411 EP - 425 PB - Taylor & Francis ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Benim, Ali Cemal A1 - Pathak, Manabendra A1 - Chamoli, Sunil A1 - Gupta, Ashutosh T1 - Thermohydraulic characteristics of inline and staggered angular cut baffle inserts in the turbulent flow regime JF - Journal of Thermal Analysis and Calorimetry Y1 - 2020 U6 - https://doi.org/10.1007/s10973-019-09094-8 SN - 1388-6150 VL - 140 IS - 3 SP - 1519 EP - 1536 PB - Springer Nature ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Banerjee, Arnab A1 - Benim, Ali Cemal T1 - Heat transfer and flow field in a circular twisted channel JF - MATEC Web of Conferences Y1 - 2018 U6 - https://doi.org/10.1051/matecconf/201824001005 VL - 240 PB - edp sciences ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal T1 - Computational investigation of heat transfer enhancement by alternating inclined ribs in tubular heat exchanger JF - Progress in Computational Fluid Dynamics KW - CFD KW - forced convection KW - transitional turbulence KW - inclined ribs KW - heat transfer enhancement Y1 - 2017 U6 - https://doi.org/10.1504/PCFD.2017.088818 SN - 1468-4349 VL - 17 IS - 6 SP - 390 EP - 396 PB - Inderscience Enterprises Limited ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Chattopadhyay, Himadri A1 - Guin, Anindya A1 - Benim, Ali Cemal T1 - Investigation of Inclined Turbulators for Heat Transfer Enhancement in a Solar Air Heater JF - Heat Transfer Engineering Y1 - 2019 U6 - https://doi.org/10.1080/01457632.2018.1474593 VL - 40 IS - 17/18 SP - 1451 EP - 1460 PB - Taylor & Francis ER - TY - JOUR A1 - Bhattacharyya, Suvanjan A1 - Gobinda Das, Sampad A1 - Chattopadhyay, Himadri A1 - Benim, Ali Cemal A1 - Moghimi, M. A. T1 - Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Microchannel under Pulsating Inlet Flow Condition JF - E3S Web of Conferences Y1 - 2019 U6 - https://doi.org/10.1051/e3sconf/201912801011 VL - 128 PB - edp sciences ER - TY - CHAP A1 - Bhatti, Carina A1 - Jepkens, Katja A1 - Hauprich, Kai ED - Jepkens, Katja ED - Scholten, Lisa ED - van Rießen, Anne T1 - Arbeitsbeziehungen Ehrenamtlicher im Bereich (Flucht-)Migration T2 - Integration im Sozialraum. Theoretische Konzepte und empirische Bewertungen Y1 - 2020 SN - 978-3-658-28201-1 U6 - https://doi.org/10.1007/978-3-658-28202-8_24 SP - 371 EP - 383 PB - Springer Fachmedien CY - Wiesbaden ER - TY - THES A1 - Biedermann, Till M. T1 - Aeroacoustic transfer of leading edge serrations from single aerofoils to low-pressure fan applications T1 - Strömungsakustischer Transfer von Leading Edge Serrations an einzelnen Tragflügeln hin zu Niederdruck-Axialventilatoren N2 - Leading edge serrations are well-known for their aeroacoustic potential in reducing aerofoil-turbulence interaction noise and are also associated with certain aerodynamic advantages. To prepare leading edge serrations for industrial application, two obstacles remain to be addressed. First is a combined analysis of the aeroacoustic and the aerodynamic performance of leading edge serrations to develop optimum designs. Second is the need to examine the transferability of the known effects of leading edge serrations from a single aerofoil to full rotors, which are considered to be the final area of application. This thesis aims to assist in the transfer of a well-investigated aerofoil with serrated leading edges from the rigid to the rotating domain. With this purpose, a single aerofoil type is selected and thoroughly analysed, experimentally and numerically, to generate a reliable data basis for aerodynamic performance and noise reduction capability. Aside from gathering information on the overall performance, the spatial distribution of the noise sources is localised, and the spectral composition of the noise reduction is found to follow a clearly defined scaling law. Aerodynamically, generated vortices are found to be responsible for a complex three-dimensional separation mechanism of the leading edge serrations, causing a delay of stall. The generated data basis is then used to design low-pressure axial fans of minimum complexity by keeping the initially chosen aerofoil type. The experimentally identified noise reduction mechanisms for the serrated axial fans are found to be more diverse than the single aerofoil and highly dependent on the inflow conditions and the operation point of the fan. A highly similar pattern for the spectral scaling of the noise reduction supports the finding that at optimum operation conditions, the previously identified noise reduction mechanisms for the single aerofoils are transferable to the rotating domain. On the other hand, additional aerodynamic mechanisms are found to dominate the noise reduction for the instability region of the fan, also contributing to reduced blade-to-blade interaction effects. Moreover, the blade-tip leakage flow is altered by delaying the development of coherent structures. The next step towards a more general description of the aeroacoustic and aerodynamic dependencies is developing a comprehensive model based on artificial neural networks. This model allows a combined analysis of the aerodynamic and acoustic performance of rotors with serrated leading edges and shows an accurate prediction of the overall performance and the spectral composition of the radiated noise. It also enables the development of multi-objective optima for serration designs and motivates further studies into the generalisability of the observed trends. Furthermore, the developed model represents a feasible tool to create tailored serration designs for maximum efficiency in both aeroacoustics and aerodynamics, contributing to the development of future low-noise fans and rotating machinery. N2 - Leading Edge Serrations sind hinlänglich für ihr Potential zur Reduktion von turbulenzinduziertem Schall bekannt. Ebenso können sie sich als aerodynamisch vorteilhaft erweisen. Mit dem Ziel, Leading Edge Serrations industriellen Anwendungen zugänglich zu machen, verbleiben primär noch zwei Hemmnisse. Zum einen die Notwendigkeit einer kombinierten Bewertung des aerodynamischen und des aeroakustischen Potentials mit dem Ziel der Identifikation optimaler Designansätze. Zum anderen sind Aussagen hinsichtlich der Übertragbarkeit der bekannten Schallreduktionsmechanismen von einem einzelnen Tragflügel hin zu rotierenden Strömungsmaschinen zu treffen, da letztere das finale Anwendungsgebiet von Leading Edge Serrations darstellen. Diese Arbeit zielt darauf ab, bei dem Transfer eines umfassend analysierten Tragflügeldesigns mit Leading Edge Serrations hin zu einem rotierenden System zu assistieren. Hierzu wird ein für spätere rotierende Anwendungen sinnvolles Tragflügelprofil gewählt und sowohl experimentell als auch numerisch umfassend untersucht, um eine Datenbasis des aerodynamischen und aeroakustischen Potentials zu generieren. Neben Informationen über die globalen Eigenschaften, wurde ebenfalls die räumliche Lage der Schallquellen lokalisiert. Zudem konnte der Verlauf des spektralen Schallreduktionsvermögens einer klaren Gesetzmäßigkeit zugeordnet werden. In Bezug auf die Aerodynamik wurden Wirbelstrukturen, welche sich an den Leading Edge Serrations bilden, als ursächlich für einen komplexen dreidimensionalen Ablösemechanismus identifiziert, welcher eine verzögerte Strömungsablösung bewirkt. Unter Beibehaltung des gewählten Tragflügelprofils wurde die generierte Datenbasis in einem zweiten Schritt zur Auslegung von axialen Niederdruckventilatoren niedriger Komplexität genutzt. Die hier experimentell identifizieren Schallreduktionsmechanismen sind, im Vergleich zu einem einzelnen Tragflügel, deutlich diverser und weisen eine klare Abhängigkeit vom Betriebspunkt des Ventilators sowie von den Einflussparametern auf. Unter optimalen Zuströmbedingungen kann eine klare Übertragbarkeit der Effekte vom ebenen in das rotierende System gezeigt werden. Im Gegensatz wird das Schallreduktionspotential im Instabilitätsbereich des Ventilators durch aerodynamische Strömungsphänomene dominiert, welche zudem zu einer vorteilhaften Beeinflussung von Schaufelinteraktionen beitragen. Des Weiteren wurde durch den Einsatz von Rotoren mit Leading Edge Serrations eine verzögerte Entstehung von kohärenten Strukturen im Blattspitzenbereich nachgewiesen. Um einen weiteren Schritt in Richtung einer globalen Beschreibung der erhaltenen aeroakustischen und aerodynamischen Abhängigkeiten zu gehen, wurde ein umfassendes Modell generiert, welches auf dem Training künstlicher neuronaler Netze beruht. Das generierte Modell ermöglicht eine kombinierte Prognose der aerodynamischen und aeroakustischen Performance der getesteten Prototypen und weist sowohl im Zeitbereich als auch hinsichtlich der spektralen Zusammensetzung der Signale eine hohe Prognosegüte auf. Dies ermöglicht die Definition multikriterieller Optima bezüglich des Serration Designs und motiviert weiterführende Studien hinsichtlich einer Generalisierbarkeit der beobachteten Trends. Schlussendlich ermöglicht das generierte Modell maßgeschneiderte Designansätze für eine maximale aerodynamische und aeroakustische Effizienz, was einen sinnvollen Beitrag zur zukünftigen Entwicklungen schallarmer Ventilatoren und Strömungsmaschinen darstellt. KW - aeroacoustics KW - aerodynamics KW - low-pressure axial fan KW - leading edge serrations KW - artificial neural networks KW - künstliche neuronale Netze KW - Vorderkantenzacken KW - Niederdruck-Axialventilatoren KW - Aerodynamik KW - Strömungsakustik Y1 - 2019 U6 - https://doi.org/10.14279/depositonce-9075 PB - Technische Universität Berlin CY - Berlin ER - TY - JOUR A1 - Biedermann, Till M. A1 - Chong, Tze Pei A1 - Kameier, Frank A1 - Paschereit, Christian O. T1 - Statistical–Empirical Modeling of Airfoil Noise Subjected to Leading-Edge Serrations JF - AIAA Journal Y1 - 2017 U6 - https://doi.org/10.2514/1.j055633 VL - 55 IS - 9 SP - 3128 EP - 3142 PB - ARC ER - TY - JOUR A1 - Biedermann, Till M. A1 - Czeckay, Pasquale A1 - Geyer, Thomas F. A1 - Kameier, Frank A1 - Paschereit, Christian O. T1 - Effect of Inflow Conditions on the Noise Reduction Through Leading Edge Serrations JF - AIAA Journal Y1 - 2019 U6 - https://doi.org/10.2514/1.j057831 SN - 1533-385X VL - 57 IS - 9 SP - 4104 EP - 4109 PB - ARC ER - TY - JOUR A1 - Biedermann, Till M. A1 - Czeckay, Pasquale A1 - Hintzen, Nils A1 - Kameier, Frank A1 - Paschereit, C. O. T1 - Applicability of Aeroacoustic Scaling Laws of Leading Edge Serrations for Rotating Applications JF - acoustics KW - DOAJ KW - ISAVE Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:due62-opus-40311 SN - 2624-599X VL - 2 IS - 3 SP - 579 EP - 594 PB - MDPI ER -