@article{FabianGuersesHeiseletal.2010, author = {Fabian, Benjamin and G{\"u}rses, Seda and Heisel, Maritta and Santen, Thomas and Schmidt, Holger}, title = {A comparison of security requirements engineering methods}, series = {Requirements Engineering}, volume = {15}, journal = {Requirements Engineering}, number = {1}, publisher = {Springer}, address = {Wiesbaden}, issn = {0947-3602}, doi = {10.1007/s00766-009-0092-x}, pages = {7 -- 40}, year = {2010}, abstract = {This paper presents a conceptual framework for security engineering, with a strong focus on security requirements elicitation and analysis. This conceptual framework establishes a clear-cut vocabulary and makes explicit the interrelations between the different concepts and notions used in security engineering. Further, we apply our conceptual framework to compare and evaluate current security requirements engineering approaches, such as the Common Criteria, Secure Tropos, SREP, MSRA, as well as methods based on UML and problem frames. We review these methods and assess them according to different criteria, such as the general approach and scope of the method, its validation, and quality assurance capabilities. Finally, we discuss how these methods are related to the conceptual framework and to one another.}, language = {en} } @article{SchornVerhoevenRidderetal.2021, author = {Schorn, Michelle A. and Verhoeven, Stefan and Ridder, Lars and Huber, Florian and Acharya, Deepa D. and Aksenov, Alexander A. and Aleti, Gajender and Moghaddam, Jamshid Amiri and Aron, Allegra T. and Aziz, Saefuddin and Bauermeister, Anelize and Bauman, Katherine D. and Baunach, Martin and Beemelmanns, Christine and Beman, J. Michael and Berlanga-Clavero, Mar{\´i}a Victoria and Blacutt, Alex A. and Bode, Helge B. and Boullie, Anne and Brejnrod, Asker and Bugni, Tim S. and Calteau, Alexandra and Cao, Liu and Carri{\´o}n, V{\´i}ctor J. and Castelo-Branco, Raquel and Chanana, Shaurya and Chase, Alexander B. and Chevrette, Marc G. and Costa-Lotufo, Leticia V. and Crawford, Jason M. and Currie, Cameron R. and Cuypers, Bart and Dang, Tam and de Rond, Tristan and Demko, Alyssa M. and Dittmann, Elke and Du, Chao and Drozd, Christopher and Dujardin, Jean-Claude and Dutton, Rachel J. and Edlund, Anna and Fewer, David P. and Garg, Neha and Gauglitz, Julia M. and Gentry, Emily C. and Gerwick, Lena and Glukhov, Evgenia and Gross, Harald and Gugger, Muriel and Guill{\´e}n Matus, Dulce G. and Helfrich, Eric J. N. and Hempel, Benjamin-Florian and Hur, Jae-Seoun and Iorio, Marianna and Jensen, Paul R. and Kang, Kyo Bin and Kaysser, Leonard and Kelleher, Neil L. and Kim, Chung Sub and Kim, Ki Hyun and Koester, Irina and K{\"o}nig, Gabriele M. and Leao, Tiago and Lee, Seoung Rak and Lee, Yi-Yuan and Li, Xuanji and Little, Jessica C. and Maloney, Katherine N. and M{\"a}nnle, Daniel and Martin H, Christian and McAvoy, Andrew C. and Metcalf, Willam W. and Mohimani, Hosein and Molina-Santiago, Carlos and Moore, Bradley S. and Mullowney, Michael W. and Muskat, Mitchell and Nothias, Louis-F{\´e}lix and O'Neill, Ellis C. and Parkinson, Elizabeth I. and Petras, Daniel and Piel, J{\"o}rn and Pierce, Emily C. and Pires, Karine and Reher, Raphael and Romero, Diego and Roper, M. Caroline and Rust, Michael and Saad, Hamada and Saenz, Carmen and Sanchez, Laura M. and S{\o}rensen, S{\o}ren Johannes and Sosio, Margherita and S{\"u}ssmuth, Roderich D. and Sweeney, Douglas and Tahlan, Kapil and Thomson, Regan J. and Tobias, Nicholas J. and Trindade-Silva, Amaro E. and van Wezel, Gilles P. and Wang, Mingxun and Weldon, Kelly C. and Zhang, Fan and Ziemert, Nadine and Duncan, Katherine R. and Cr{\"u}semann, Max and Rogers, Simon and Dorrestein, Pieter C. and Medema, Marnix H. and van der Hooft, Justin J. J.}, title = {A community resource for paired genomic and metabolomic data mining}, series = {Nature Chemical Biology}, volume = {17}, journal = {Nature Chemical Biology}, number = {4}, publisher = {Nature}, issn = {1552-4469}, doi = {10.1038/s41589-020-00724-z}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-34708}, pages = {363 -- 368}, year = {2021}, language = {en} } @inproceedings{ScherpFranzSaathoffetal.2009, author = {Scherp, Ansgar and Franz, Thomas and Saathoff, Carsten and Staab, Steffen}, title = {A Common Model of Events and Objects based on DOLCE+ Ultra Light}, series = {ESWC Poster Session}, booktitle = {ESWC Poster Session}, publisher = {Pennsylvania State University}, organization = {CiteSeerX}, year = {2009}, language = {en} } @inproceedings{SchwittekSchmidtBeckersetal.2012, author = {Schwittek, Widura and Schmidt, Holger and Beckers, Kristian and Eicker, Stefan and Faßbender, Stephan and Heisel, Maritta}, title = {A Common Body of Knowledge for Engineering Secure Software and Services}, series = {2012 Seventh International Conference on Availability, Reliability and Security}, volume = {NESSoS, ICT-2009.1.4 Trustworthy ICT, Grant No. 25698}, booktitle = {2012 Seventh International Conference on Availability, Reliability and Security}, publisher = {IEEE}, address = {Prague}, isbn = {978-1-4673-2244-7}, doi = {10.1109/ARES.2012.31}, pages = {499 -- 506}, year = {2012}, abstract = {The discipline of engineering secure software and services brings together researchers and practitioners from software, services, and security engineering. This interdisciplinary community is fairly new, it is still not well integrated and is therefore confronted with differing perspectives, processes, methods, tools, vocabularies, and standards. We present a Common Body of Knowledge (CBK) to overcome the aforementioned problems. We capture use cases from research and practice to derive requirements for the CBK. Our CBK collects, integrates, and structures knowledge from the different disciplines based on an ontology that allows one to semantically enrich content to be able to query the CBK. The CBK heavily relies on user participation, making use of the Semantic MediaWiki as a platform to support collaborative writing. The ontology is complemented by a conceptual framework, consisting of concepts to structure the knowledge and to provide access to it, and a means to build a common terminology. We also present organizational factors covering dissemination and quality assurance.}, language = {en} } @incollection{JonesCastroMahmoudetal.2002, author = {Jones, Kevin and Castro, Breno and Mahmoud, Osama and Pollard, S. and Platzer, Max and Neef, Matthias and Gonet, K. and Hummel, D.}, title = {A collaborative numerical and experimental investigation of flapping-wing propulsion}, series = {40th AIAA Aerospace Sciences Meeting \& Exhibit}, booktitle = {40th AIAA Aerospace Sciences Meeting \& Exhibit}, publisher = {American Institute of Aeronautics and Astronautics}, address = {Reston, Virigina}, doi = {10.2514/6.2002-706}, pages = {36}, year = {2002}, abstract = {An international, collaborative investigation is undertaken to evaluate the relative merits and limitations of various numerical methods and experimental measurement techniques, specifically for the analysis of flapping-wing propulsion. A finite aspect-ratio configuration is extensively investigated, both quantitatively and qualitatively, in a low-speed wind tunnel. Direct force measurements are made, as well as time-accurate and time-averaged laser Doppler velocimetry and unsteady flow visualization. The reduced frequency, mean angle of attack, aspect ratio and Reynolds number are varied in the experiments. The experiment is numerically simulated using flatplate theory, two and three-dimensional panel codes, and two and three-dimensional Euler and Navier- Stokes solvers. The ability of each of the methods to capture important aspects of the flow physics are evaluated through comparisons with each other and the experimental data. Additionally, the comparisons indicate areas where further research is needed. The collaborative effort provides a survey of available capabilities and provides a fixed set of flappingwing data for others to compare against.}, language = {en} } @article{HerderYamazaki2000, author = {Herder, Jens and Yamazaki, Yasuhiro}, title = {A Chatspace Deploying Spatial Audio for Enhanced Conferencing}, series = {Journal of the 3D-Forum Society}, volume = {15}, journal = {Journal of the 3D-Forum Society}, number = {1}, year = {2000}, language = {en} } @inproceedings{HerderYamazaki2000, author = {Herder, Jens and Yamazaki, Yasuhiro}, title = {A Chatspace Deploying Spatial Audio for Enhanced Conferencing}, series = {Third International Conference on Human and Computer}, booktitle = {Third International Conference on Human and Computer}, publisher = {University of Aizu}, address = {Aizu-Wakamatsu}, pages = {197 -- 202}, year = {2000}, language = {en} } @incollection{DeckertMontiRaueiser2015, author = {Deckert, Carsten and Monti, Alessandro and Raueiser, Markus}, title = {A Brazilian Love Affair - Did ThyssenKrupp's Internationalization Strategy Fail?}, series = {Strategy case book}, booktitle = {Strategy case book}, editor = {Albers, Sascha}, publisher = {K{\"o}lner Wissenschaftsverlag}, address = {K{\"o}ln}, isbn = {978-3-942720-84-7}, pages = {123 -- 137}, year = {2015}, language = {en} } @article{DahmBarnjakHeilemann2016, author = {Dahm, Markus and Barnjak, Frano and Heilemann, Moritz}, title = {5Code - An Integrated Programming Environment for Beginners}, series = {i-com: Journal of Interactive Media}, volume = {15}, journal = {i-com: Journal of Interactive Media}, number = {1}, issn = {2196-6826}, doi = {10.1515/icom-2016-0002}, pages = {79 -- 92}, year = {2016}, abstract = {Based on experience in teaching programming, we developed the integrated development environment (IDE) 5Code especially to support beginners. As a first step, a simple, understandable formula was developed how to advance from the problem to the program in 5 operative steps: read it → get it → think it → note it → code it. In order to reduce the cognitive load of the learners effectively, 5Code was designed such that all 5 steps are permanently presented, accessible and executable. Thus, learners are provided with the entire programming context from presentation of the task via own notes and annotations to the code area. Learners can mark and annotate any part of the given task's text; these annotations can be edited as notes with own comments. Furthermore, the notes can be dragged into the code area, where they are shown as comments in the coding language. Any modifications in the comments are synchronized between notes and code. 5Code is implemented as a web-application. It is used in university introductory courses on object oriented programming.}, language = {en} } @inproceedings{BaranowskiUtzigFischeretal.2018, author = {Baranowski, Artur and Utzig, Sebastian and Fischer, Philipp and Gerndt, Andreas and Herder, Jens}, title = {3D spacecraft configuration using immersive AR technology}, series = {Workshop Proceedings / Tagungsband: Virtuelle und Erweiterte Realit{\"a}t - 15. Workshop der GI-Fachgruppe VR/AR}, booktitle = {Workshop Proceedings / Tagungsband: Virtuelle und Erweiterte Realit{\"a}t - 15. Workshop der GI-Fachgruppe VR/AR}, editor = {Herder, Jens and Geiger, Christian and D{\"o}rner, Ralf and Grimm, Paul}, publisher = {Shaker Verlag}, address = {Herzogenrath}, isbn = {978-3-8440-6215-1}, doi = {10.2370/9783844062151}, pages = {71 -- 82}, year = {2018}, abstract = {In this paper we propose an integrated immersive augmented reality solution for a software tool supporting spacecraft design and verification. The spacecraft design process relies on expertise in many domains, such as thermal and structural engineering. The various subsystems of a spacecraft are highly interdependent and have differing requirements and constraints. In this context, interactive visualizations play an important role in making expert knowledge accessible. Recent immersive display technologies offer new ways of presenting and interacting with computer-generated content. Possibilities and challenges for spacecraft configuration employing these technologies are explored and discussed. A user interface design for an application using the Microsoft HoloLens is proposed. To this end, techniques for selecting a spacecraft component and manipulating its position and orientation in 3D space are developed and evaluated. Thus, advantages and limitations of this approach to spacecraft configuration are revealed and discussed.}, language = {en} } @article{JacquotJuergenSchumannetal.2011, author = {Jacquot, Alexandre and J{\"u}rgen, Thomas and Schumann, Joachim and J{\"a}gle, Martin and B{\"o}ttner, Harald and Gemming, Thomas and Schmidt, J{\"u}rgen and Ebling, Dirk}, title = {(Bi,Sb) 2 Te 3 -PbTe chalcogenide alloys: Impact of the cooling rate and sintering parameters on the microstructures and thermoelectric performances}, series = {Journal of Materials Research}, volume = {26}, journal = {Journal of Materials Research}, number = {15}, publisher = {Cambridge University Press}, doi = {10.1557/jmr.2011.78}, pages = {1773 -- 1784}, year = {2011}, language = {en} } @inproceedings{MertlMeisslerWieketal.2019, author = {Mertl, Fabian and Meißler, Nadine and Wiek, Lena and Fr{\"o}hlich, Alina and Huldtgren, Alina}, title = {"Traumreise" - Exploring the Use of Multisensory Digital Media in Dementia Groups}, series = {Proceedings of the 13th EAI International Conference on Pervasive Computing Technologies for Healthcare, Trento Italy May 20 - 23, 2019}, booktitle = {Proceedings of the 13th EAI International Conference on Pervasive Computing Technologies for Healthcare, Trento Italy May 20 - 23, 2019}, publisher = {Association for Computing Machinery}, address = {New York}, isbn = {9781450361262}, doi = {10.1145/3329189.3329199}, pages = {189 -- 197}, year = {2019}, language = {en} }