@article{BenimPfeiffelmann2020, author = {Benim, Ali Cemal and Pfeiffelmann, Bj{\"o}rn}, title = {Comparison of Combustion Models for Lifted Hydrogen Flames within RANS Framework}, series = {Energies}, volume = {13}, journal = {Energies}, number = {1}, publisher = {MDPI}, issn = {1996-1073}, doi = {10.3390/en13010152}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27727}, pages = {152}, year = {2020}, language = {en} } @article{FominPetelinJahr2020, author = {Fomin, Alexey and Petelin, Daniil and Jahr, Andreas}, title = {Synthesis and Analysis of a Novel Linkage Mechanism with the Helical Motion of the End-Effector}, series = {Robotics}, volume = {9}, journal = {Robotics}, number = {3}, publisher = {MDPI}, issn = {2218-6581}, doi = {10.3390/robotics9030053}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27736}, pages = {1 -- 15}, year = {2020}, language = {en} } @article{PfeiffelmannDiederichGueletal.2020, author = {Pfeiffelmann, Bj{\"o}rn and Diederich, Michael and G{\"u}l, Fethi and Benim, Ali Cemal and Heese, Markus and Hamberger, Andreas}, title = {Computational and Experimental Investigation of an Industrial Biomass Furnace}, series = {Chemical Engineering \& Technology}, volume = {43}, journal = {Chemical Engineering \& Technology}, number = {8}, publisher = {Wiley}, issn = {1521-4125}, doi = {10.1002/ceat.201900637}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27747}, pages = {1538 -- 1546}, year = {2020}, language = {en} } @article{ShahzadGulistanAlietal.2020, author = {Shahzad, Azeem and Gulistan, Uzma and Ali, Ramzan and Iqbal, Azhar and Benim, Ali Cemal and Kamran, Muhammad and Khan, Salah Ud-Din and Khan, Shahab Ud-Din and Farooq, Aamir}, title = {Numerical Study of Axisymmetric Flow and Heat Transfer in a Liquid Film over an Unsteady Radially Stretching Surface}, series = {Mathematical Problems in Engineering}, volume = {2020}, journal = {Mathematical Problems in Engineering}, publisher = {Hindawi}, doi = {10.1155/2020/6737243}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27755}, pages = {1 -- 9}, year = {2020}, language = {en} } @article{BaşaranBenimYurddas2019, author = {Ba{\c{s}}aran, An{\i}l and Benim, Ali Cemal and Yurddas, Ali}, title = {Prediction of heat and fluid flow in microchannel condensation}, series = {E3S Web of Conferences}, volume = {128}, journal = {E3S Web of Conferences}, publisher = {edp sciences}, issn = {2267-1242}, doi = {10.1051/e3sconf/201912801015}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27768}, year = {2019}, language = {en} } @article{BenimDiederich2019, author = {Benim, Ali Cemal and Diederich, Michael}, title = {Prediction of Roughness Effects on Wind Turbine Aerodynamics}, series = {E3S Web of Conferences}, volume = {128}, journal = {E3S Web of Conferences}, publisher = {edp sciences}, issn = {2267-1242}, doi = {10.1051/e3sconf/201912809004}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27775}, year = {2019}, language = {en} } @article{BenimDiederichNahavandi2019, author = {Benim, Ali Cemal and Diederich, Michael and Nahavandi, Ali}, title = {Prediction of flow and dispersion in cross-ventilated buildings}, series = {E3S Web of Conferences}, volume = {128}, journal = {E3S Web of Conferences}, publisher = {edp sciences}, organization = {edp sciences}, issn = {2267-1242}, doi = {10.1051/e3sconf/201912805002}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27785}, year = {2019}, language = {en} } @article{BenimPfeiffelmann2019, author = {Benim, Ali Cemal and Pfeiffelmann, Bj{\"o}rn}, title = {Prediction of burning velocity and quenching distance of hydrogen flames}, series = {E3S Web of Conferences}, volume = {128}, journal = {E3S Web of Conferences}, publisher = {edp sciences}, issn = {2267-1242}, doi = {10.1051/e3sconf/201912801012}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27790}, year = {2019}, language = {en} } @article{BenimPfeiffelmann2019, author = {Benim, Ali Cemal and Pfeiffelmann, Bj{\"o}rn}, title = {Prediction of hydrogen flame propagation in a channel with exit contraction}, series = {E3S Web of Conferences}, volume = {128}, journal = {E3S Web of Conferences}, number = {01013}, publisher = {edp sciences}, issn = {2267-1242}, doi = {10.1051/e3sconf/201912801013}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27806}, year = {2019}, language = {en} } @article{BiedermannReichPaschereit2020, author = {Biedermann, Till M. and Reich, M. and Paschereit, C. O.}, title = {Multi-Objective Modeling of Leading-Edge Serrations Applied to Low-Pressure Axial Fans}, series = {Journal of Engineering for Gas Turbines and Power}, volume = {142}, journal = {Journal of Engineering for Gas Turbines and Power}, number = {11}, publisher = {ASME}, doi = {10.1115/1.4048599}, year = {2020}, language = {en} } @article{GirodLohmannSchlueteretal.2020, author = {Girod, Kai and Lohmann, Heiko and Schl{\"u}ter, Stefan and Kaluza, Stefan}, title = {Methanol Synthesis with Steel-Mill Gases: Simulation and Practical Testing of Selected Gas Utilization Scenarios}, series = {Processes}, volume = {8}, journal = {Processes}, number = {12}, publisher = {MDPI}, doi = {10.3390/pr8121673}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-26928}, year = {2020}, language = {en} } @article{NoltingSpiegelReichetal.2020, author = {Nolting, Lars and Spiegel, Thomas and Reich, Marius and Adam, Mario and Praktiknjo, Aaron}, title = {Can energy system modeling benefit from artificial neural networks? Application of two-stage metamodels to reduce computation of security of supply assessments}, series = {Computers \& Industrial Engineering}, volume = {142}, journal = {Computers \& Industrial Engineering}, publisher = {Elsevier}, issn = {0360-8352}, doi = {10.1016/j.cie.2020.106334}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-26979}, year = {2020}, language = {en} } @article{WiesmannYounSuhKaluzaetal.2020, author = {Wiesmann, Thomas and Youn Suh, Sung and Kaluza, Stefan and Lohmann, Heiko and Zeidler-Fandrich, Barbara}, title = {Catalytic Oxygen Removal from Synthetic Coke Oven Gas: A Comparison of Sulfided CoMo/γ-Al 2 O 3 and NiMo/γ-Al 2 O 3 Catalysts with Pt/γ-Al 2 O 3 as Benchmark Catalyst}, series = {Chemie Ingenieur Technik}, volume = {92}, journal = {Chemie Ingenieur Technik}, number = {10}, publisher = {Wiley}, doi = {10.1002/cite.202000067}, pages = {1533 -- 1541}, year = {2020}, language = {en} } @misc{OPUS4-2682, title = {738 - Dritte Satzung zur {\"A}nderung der Rahmenpr{\"u}fungsordnung f{\"u}r den Fachbereich Maschinenbau und Verfahrenstechnik an der Hochschule D{\"u}sseldorf vom 18.02.2021}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-26827}, pages = {5}, year = {2021}, abstract = {Aufgrund der \S\S 2 Abs. 4, 64 Abs. 1 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell g{\"u}ltigen Fassung hat die Hochschule D{\"u}sseldorf die folgende Ordnung als Satzung erlassen.}, subject = {Pr{\"u}fungsrecht}, language = {de} } @misc{OPUS4-2683, title = {739 - Zweite Satzung zur {\"A}nderung der Pr{\"u}fungsordnung f{\"u}r die Bachelorstudieng{\"a}nge „Energie- und Umwelttechnik" (EUT), „Umwelt- und Verfahrenstechnik" (UVT), „Maschinenbau Produktentwicklung" (MPE), „Maschinenbau Produktionstechnik" (MPT) und „Wirtschaftsingenieur Maschinenbau" (WIM) an der Hochschule D{\"u}sseldorf vom 18.02.2021}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-26836}, pages = {2}, year = {2021}, abstract = {Aufgrund der \S\S 2 Abs. 4, 64 Abs. 1 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell g{\"u}ltigen Fas-sung hat die Hochschule D{\"u}sseldorf die folgende Ordnung als Satzung erlassen.}, subject = {Pr{\"u}fungsrecht}, language = {de} } @misc{OPUS4-2684, title = {740 - F{\"u}nfte Satzung zur {\"A}nderung der Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang Internationales Wirtschaftsingenieurwesen an der Hochschule D{\"u}sseldorf vom 18.02.2021}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-26848}, pages = {3}, year = {2021}, abstract = {Aufgrund der \S\S 2 Abs. 4, 64 Abs. 1 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell g{\"u}ltigen Fassung hat die Hochschule D{\"u}sseldorf die folgende Ordnung als Satzung erlassen.}, subject = {Pr{\"u}fungsrecht}, language = {de} } @misc{OPUS4-2685, title = {741 - Vierte Satzung zur {\"A}nderung der Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Mechanical Engineering" an der Hochschule D{\"u}sseldorf vom 18.02.2021}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-26855}, pages = {3}, year = {2021}, abstract = {Aufgrund der \S\S 2 Abs. 4, 64 Abs. 1 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell g{\"u}ltigen Fassung hat die Hochschule D{\"u}sseldorf die folgende Ordnung als Satzung erlassen.}, subject = {Pr{\"u}fungsrecht}, language = {de} } @misc{OPUS4-2686, title = {742 - Dritte Satzung zur {\"A}nderung der Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Simulations- und Experimentaltechnik" an der Hochschule D{\"u}sseldorf vom 18.02.2021}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-26868}, pages = {3}, year = {2021}, abstract = {Aufgrund der \S\S 2 Abs. 4, 64 Abs. 1 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell g{\"u}ltigen Fassung hat die Hochschule D{\"u}sseldorf die folgende Ordnung als Satzung erlassen.}, language = {de} } @article{BenimPfeiffelmann2019, author = {Benim, Ali Cemal and Pfeiffelmann, Bj{\"o}rn}, title = {Validation of Combustion Models for Lifted Hydrogen Flame}, series = {E3S Web of Conferences}, volume = {128}, journal = {E3S Web of Conferences}, publisher = {edp sciences}, issn = {2267-1242}, doi = {10.1051/e3sconf/201912801014}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27815}, year = {2019}, language = {en} } @article{BenimPfeiffelmannOcłońetal.2019, author = {Benim, Ali Cemal and Pfeiffelmann, Bj{\"o}rn and Ocłoń, Paweł and Taler, Jan}, title = {Computational investigation of a lifted hydrogen flame with LES and FGM}, series = {Energy}, volume = {173}, journal = {Energy}, publisher = {Elsevier}, issn = {0360-5442}, doi = {10.1016/j.energy.2019.02.133}, pages = {1172 -- 1181}, year = {2019}, language = {en} } @article{BhattacharyyaGobindaDasChattopadhyayetal.2019, author = {Bhattacharyya, Suvanjan and Gobinda Das, Sampad and Chattopadhyay, Himadri and Benim, Ali Cemal and Moghimi, M. A.}, title = {Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Microchannel under Pulsating Inlet Flow Condition}, series = {E3S Web of Conferences}, volume = {128}, journal = {E3S Web of Conferences}, publisher = {edp sciences}, doi = {10.1051/e3sconf/201912801011}, year = {2019}, language = {en} } @article{BiedermannCzeckayGeyeretal.2019, author = {Biedermann, Till M. and Czeckay, Pasquale and Geyer, Thomas F. and Kameier, Frank and Paschereit, Christian O.}, title = {Effect of Inflow Conditions on the Noise Reduction Through Leading Edge Serrations}, series = {AIAA Journal}, volume = {57}, journal = {AIAA Journal}, number = {9}, publisher = {ARC}, issn = {1533-385X}, doi = {10.2514/1.j057831}, pages = {4104 -- 4109}, year = {2019}, language = {en} } @article{GuoDoRuess2019, author = {Guo, Y. and Do, H. and Ruess, Martin}, title = {Isogeometric stability analysis of thin shells: From simple geometries to engineering models}, series = {International Journal for Numerical Methods in Engineering}, volume = {118}, journal = {International Journal for Numerical Methods in Engineering}, number = {8}, publisher = {Wiley}, issn = {1097-0207}, doi = {10.1002/nme.6020}, pages = {433 -- 458}, year = {2019}, language = {en} } @article{PfeiffelmannDiederichGueletal.2019, author = {Pfeiffelmann, Bj{\"o}rn and Diederich, Michael and G{\"u}l, Fethi and Benim, Ali Cemal and Hamberger, Andreas and Heese, Markus}, title = {Analysis of combustion, heat and fluid flow in a biomass furnace}, series = {E3S Web of Conferences}, volume = {128}, journal = {E3S Web of Conferences}, publisher = {edp sciences}, issn = {2267-1242}, doi = {10.1051/e3sconf/201912803003}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27880}, year = {2019}, language = {en} } @article{PfeiffelmannOezmanBenimetal.2019, author = {Pfeiffelmann, Bj{\"o}rn and {\"O}zman, Cansu and Benim, Ali Cemal and Joos, Franz}, title = {Variable temperature effects on TEG performance}, series = {E3S Web of Conferences}, volume = {128}, journal = {E3S Web of Conferences}, publisher = {edp sciences}, issn = {2267-1242}, doi = {10.1051/e3sconf/201912807004}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27893}, year = {2019}, language = {en} } @article{SaeedrashedBenim2019, author = {Saeedrashed, Younis Saida and Benim, Ali Cemal}, title = {Validation Methods of Geometric 3D-CityGML Data for Urban Wind Simulations}, series = {E3S Web of Conferences}, volume = {128}, journal = {E3S Web of Conferences}, publisher = {edp sciences}, issn = {2267-1242}, doi = {10.1051/e3sconf/201912810006}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27906}, year = {2019}, language = {en} } @article{CarapezzaBarberiRanaldietal.2012, author = {Carapezza, M. L. and Barberi, F. and Ranaldi, M. and Ricci, T. and Tarchini, L. and Barrancos, Jos{\´e} and Fischer, C. and Granieri, D. and Lucchetti, C. and Melian, G. and Perez, N. and Tuccimei, P. and Vogel, A. and Weber, Konradin}, title = {Hazardous gas emissions from the flanks of the quiescent Colli Albani volcano (Rome, Italy)}, series = {Applied Geochemistry}, volume = {27}, journal = {Applied Geochemistry}, number = {9}, publisher = {Elsevier}, doi = {10.1016/j.apgeochem.2012.02.012}, pages = {1767 -- 1782}, year = {2012}, language = {en} } @article{FleigerReichardtTreiber2012, author = {Fleiger, P. M. and Reichardt, Roland and Treiber, K.}, title = {High-Precision Power Measurement for the Grindability Test According to Zeisel}, series = {Chemical Engineering \& Technology}, volume = {35}, journal = {Chemical Engineering \& Technology}, number = {11}, publisher = {Wiley}, doi = {10.1002/ceat.201200118}, pages = {1941 -- 1948}, year = {2012}, language = {en} } @article{GlembinAdamDeidertetal.2012, author = {Glembin, Jens and Adam, Mario and Deidert, J{\"o}rn and Jagnow, Kati and Rockendorf, Gunter and Wirth, Hans Peter}, title = {Simulation and Evaluation of Different Boiler Implementations and Configurations in Solar Thermal Combi Systems}, series = {Energy Procedia}, volume = {30}, journal = {Energy Procedia}, publisher = {Elsevier}, doi = {10.1016/j.egypro.2012.11.070}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27350}, pages = {601 -- 610}, year = {2012}, language = {en} } @article{CarapezzaBarberiRanaldietal.2011, author = {Carapezza, M. L. and Barberi, F. and Ranaldi, M. and Ricci, T. and Tarchini, L. and Barrancos, Jos{\´e} and Fischer, C. and Perez, N. and Weber, Konradin and Di Piazza, A. and Gattuso, A.}, title = {Diffuse CO2 soil degassing and CO2 and H2S concentrations in air and related hazards at Vulcano Island (Aeolian arc, Italy)}, series = {Journal of Volcanology and Geothermal Research}, volume = {207}, journal = {Journal of Volcanology and Geothermal Research}, number = {3-4}, publisher = {Elsevier}, doi = {10.1016/j.jvolgeores.2011.06.010}, pages = {130 -- 144}, year = {2011}, language = {en} } @article{BenimSyedKhawarJ1998, author = {Benim, Ali Cemal and Syed, Khawar, J.,}, title = {Laminar flamelet modelling of turbulent premixed combustion}, series = {Applied Mathematical Modelling}, volume = {22}, journal = {Applied Mathematical Modelling}, number = {1-2}, publisher = {Elsevier}, doi = {10.1016/s0307-904x(98)00012-2}, pages = {113 -- 136}, year = {1998}, language = {en} } @article{DasBhattacharyyaChattopadhyayetal.2021, author = {Das, Sampad Gobinda and Bhattacharyya, Suvanjan and Chattopadhyay, Himadri and Benim, Ali Cemal}, title = {Transport Phenomenon of Simultaneously Developing Flow and Heat Transfer in Twisted Sinusoidal Wavy Microchannel under Pulsating Inlet Flow Condition}, series = {Heat Transfer Engineering}, journal = {Heat Transfer Engineering}, publisher = {Taylor \& Francis}, doi = {10.1080/01457632.2021.1875166}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27697}, pages = {1 -- 14}, year = {2021}, language = {en} } @article{PfeiffelmannBenimJoos2021, author = {Pfeiffelmann, Bj{\"o}rn and Benim, Ali Cemal and Joos, Franz}, title = {Computational Investigation of Impingement Cooling of Thermoelectric Generators}, series = {Heat Transfer Engineering}, volume = {42}, journal = {Heat Transfer Engineering}, number = {3-4}, publisher = {Taylor \& Francis}, issn = {0145-7632}, doi = {10.1080/01457632.2019.1699296}, pages = {282 -- 295}, year = {2021}, language = {en} } @article{SchrammAdam2014, author = {Schramm, Sebastian and Adam, Mario}, title = {Storage in Solar Process Heat Applications}, series = {Energy Procedia}, volume = {48}, journal = {Energy Procedia}, publisher = {Elsevier}, issn = {1876-6102}, doi = {10.1016/j.egypro.2014.02.136}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27244}, pages = {1202 -- 1209}, year = {2014}, language = {en} } @article{BiedermannKameierPaschereit2019, author = {Biedermann, Till M. and Kameier, F. and Paschereit, C. O.}, title = {Successive Aeroacoustic Transfer of Leading Edge Serrations From Single Airfoil to Low-Pressure Fan Application}, series = {Journal of Engineering for Gas Turbines and Power}, volume = {141}, journal = {Journal of Engineering for Gas Turbines and Power}, number = {10}, publisher = {ASME}, doi = {10.1115/1.4044362}, year = {2019}, language = {en} } @article{KameierWagnerHorvatetal.2009, author = {Kameier, Frank and Wagner, Thomas and Horvat, Igor and Ullrich, Frank}, title = {Experimental and numerical investigation of air dam aeroacoustics}, series = {ATZ worldwide}, volume = {111}, journal = {ATZ worldwide}, number = {7-8}, publisher = {Springer}, doi = {10.1007/bf03225090}, pages = {54 -- 59}, year = {2009}, language = {de} } @article{KameierWagnerHorvatetal.2009, author = {Kameier, Frank and Wagner, Thomas and Horvat, Igor and Ullrich, Frank}, title = {Experimentelle und numerische Untersuchung zur Str{\"o}mungsakustik einer Staulippe}, series = {ATZ Automobiltech Zeitschrift}, volume = {111}, journal = {ATZ Automobiltech Zeitschrift}, number = {7-8}, publisher = {Springer}, doi = {10.1007/bf03222094}, pages = {562 -- 567}, year = {2009}, language = {de} } @article{WeberKuttlerWeber2006, author = {Weber, Stephan and Kuttler, Wilhelm and Weber, Konradin}, title = {Flow characteristics and particle mass and number concentration variability within a busy urban street canyon}, series = {Atmospheric Environment}, volume = {40}, journal = {Atmospheric Environment}, number = {39}, publisher = {Elsevier}, doi = {10.1016/j.atmosenv.2006.07.002}, pages = {7565 -- 7578}, year = {2006}, language = {en} } @article{BenimCicekEker2018, author = {Benim, Ali Cemal and {\c{C}}i{\c{c}}ek, Ayd{\i}n and Eker, Arif Mert}, title = {A numerical analysis of the thermohydraulics of an EGS project in Turkey}, series = {MATEC Web of Conferences}, volume = {240}, journal = {MATEC Web of Conferences}, publisher = {edp sciences}, issn = {2261-236X}, doi = {10.1051/matecconf/201824005001}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27910}, year = {2018}, language = {en} } @article{BenimDiederichGuel2018, author = {Benim, Ali Cemal and Diederich, Michael and G{\"u}l, Fethi}, title = {Prediction and measurement of the aerodynamic performance of a wind turbine}, series = {MATEC Web of Conferences}, volume = {240}, journal = {MATEC Web of Conferences}, publisher = {edp sciences}, issn = {2261-236X}, doi = {10.1051/matecconf/201824004001}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27925}, year = {2018}, language = {en} } @article{BenimDiederichGueletal.2018, author = {Benim, Ali Cemal and Diederich, Michael and G{\"u}l, Fethi and Oclon, Pawel and Taler, Jan}, title = {Computational and experimental investigation of the aerodynamics and aeroacoustics of a small wind turbine with quasi-3D optimization}, series = {Energy Conversion and Management}, volume = {177}, journal = {Energy Conversion and Management}, publisher = {Elsevier}, doi = {10.1016/j.enconman.2018.09.042}, pages = {143 -- 149}, year = {2018}, language = {en} } @article{BhattacharyyaChattopadhyayBanerjeeetal.2018, author = {Bhattacharyya, Suvanjan and Chattopadhyay, Himadri and Banerjee, Arnab and Benim, Ali Cemal}, title = {Heat transfer and flow field in a circular twisted channel}, series = {MATEC Web of Conferences}, volume = {240}, journal = {MATEC Web of Conferences}, publisher = {edp sciences}, doi = {10.1051/matecconf/201824001005}, year = {2018}, language = {en} } @article{IqbalPfeiffelmannBenimetal.2018, author = {Iqbal, Sohail and Pfeiffelmann, Bj{\"o}rn and Benim, Ali Cemal and Joos, Franz}, title = {Numerical analysis of lifted hydrogen flame}, series = {MATEC Web of Conferences}, volume = {240}, journal = {MATEC Web of Conferences}, publisher = {edp sciences}, issn = {2261-236X}, doi = {10.1051/matecconf/201824001014}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27950}, year = {2018}, language = {en} } @article{NiemannPisla2018, author = {Niemann, J{\"o}rg and Pisla, Adrian}, title = {Sustainable Potentials and Risks Assess in Automation and Robotization Using the Life Cycle Management Index Tool—LY-MIT}, series = {Sustainability}, volume = {10}, journal = {Sustainability}, number = {12}, publisher = {MDPI}, issn = {2071-1050}, doi = {10.3390/su10124638}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27966}, year = {2018}, language = {en} } @article{PfeiffelmannBenim2018, author = {Pfeiffelmann, Bj{\"o}rn and Benim, Ali Cemal}, title = {Numerical study of the quenching of a laminar premixed hydrogen flame}, series = {MATEC Web of Conferences}, volume = {240}, journal = {MATEC Web of Conferences}, publisher = {edp sciences}, issn = {2261-236X}, doi = {10.1051/matecconf/201824001031}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27976}, year = {2018}, language = {en} } @article{PfeiffelmannBenimJoos2018, author = {Pfeiffelmann, Bj{\"o}rn and Benim, Ali Cemal and Joos, Franz}, title = {Numerical analysis of liquid jet impingement cooling of a thermoelectric generator}, series = {MATEC Web of Conferences}, volume = {240}, journal = {MATEC Web of Conferences}, publisher = {edp sciences}, issn = {2261-236X}, doi = {10.1051/matecconf/201824001032}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27988}, year = {2018}, language = {en} } @article{SaeedrashedBenim2018, author = {Saeedrashed, Younis Saida and Benim, Ali Cemal}, title = {A computational investigation of the hydrodynamics of the Badush dam in northern Iraq}, series = {MATEC Web of Conferences}, volume = {240}, journal = {MATEC Web of Conferences}, publisher = {edp sciences}, issn = {2261-236X}, doi = {10.1051/matecconf/201824004009}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-27997}, year = {2018}, language = {en} } @incollection{DeckertStodickHertzEichenrode2021, author = {Deckert, Carsten and Stodick, Klaus and Hertz-Eichenrode, David}, title = {Nachhaltige Paketauslieferung mit Mikro-Depots}, series = {Making Connected Mobility Work: Technische und betriebswirtschaftliche Aspekte}, booktitle = {Making Connected Mobility Work: Technische und betriebswirtschaftliche Aspekte}, editor = {Proff, Heike}, publisher = {Springer Fachmedien}, address = {Wiesbaden}, isbn = {978-3-658-32265-6}, doi = {10.1007/978-3-658-32266-3_34}, pages = {549 -- 561}, year = {2021}, language = {de} } @article{StrucksWatermannWeberetal.2021, author = {Strucks, Peter and Watermann, Clara and Weber, Konradin and Kaluza, Stefan}, title = {Systematic Investigations of Vibrational and Fluid-Mechanical Stability of Coated Monolithic Catalysts}, series = {Chemie Ingenieur Technik}, volume = {93}, journal = {Chemie Ingenieur Technik}, number = {5}, publisher = {Wiley}, issn = {1522-2640}, doi = {10.1002/cite.202000233}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-28930}, pages = {1 -- 6}, year = {2021}, abstract = {Heterogeneous catalysts usually consist of porous, inorganic materials. Especially in the mobile application, e.g., in exhaust gas catalysis as a part of the gas line of an engine, there are loads due to vibrations and high gas velocities. It can be assumed that physical stress will lead to a loss of the catalytically active coating. The present contribution describes experimental setups and methods for a systematic and reproducible investigation of the main influences to the mass loss due to vibrational and fluid-mechanical stress caused by particle-free gas flows.}, language = {en} } @article{PfeiffelmannBenimJoos2019, author = {Pfeiffelmann, Bj{\"o}rn and Benim, Ali Cemal and Joos, Franz}, title = {A Finite Volume Analysis of Thermoelectric Generators}, series = {Heat Transfer Engineering}, volume = {40}, journal = {Heat Transfer Engineering}, number = {17-18}, publisher = {Taylor \& Francis}, issn = {0145-7632}, doi = {10.1080/01457632.2018.1474588}, pages = {1442 -- 1450}, year = {2019}, language = {en} } @article{BenimGuelAssmannetal.2016, author = {Benim, Ali Cemal and G{\"u}l, Fethi and Assmann, Alexander and Akhyari, Payam and Lichtenberg, Artur and Joos, Franz}, title = {Validation of loss-coefficient-based outlet boundary conditions for simulating aortic flow}, series = {Journal of Mechanics in Medicine and Biology}, volume = {16}, journal = {Journal of Mechanics in Medicine and Biology}, number = {2}, publisher = {World Scientific}, doi = {10.1142/s0219519416500111}, year = {2016}, language = {en} } @article{BenimIqbalJoosetal.2016, author = {Benim, Ali Cemal and Iqbal, Sohail and Joos, Franz and Wiedermann, Alexander}, title = {Numerical Analysis of Turbulent Combustion in a Model Swirl Gas Turbine Combustor}, series = {Journal of Combustion}, volume = {2016}, journal = {Journal of Combustion}, publisher = {Hindawi}, issn = {2090-1968}, doi = {10.1155/2016/2572035}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-28044}, pages = {1 -- 12}, year = {2016}, language = {en} } @article{FominDvornikovParamonovetal.2016, author = {Fomin, A. and Dvornikov, L. and Paramonov, M. and Jahr, Andreas}, title = {To the theory of mechanisms subfamilies}, series = {IOP Conference Series: Materials Science and Engineering}, volume = {124}, journal = {IOP Conference Series: Materials Science and Engineering}, publisher = {IOP Publishing}, doi = {10.1088/1757-899x/124/1/012055}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-28062}, year = {2016}, language = {en} } @article{IqbalBenimFischeretal.2016, author = {Iqbal, Sohail and Benim, Ali Cemal and Fischer, S. and Joos, F. and Kluβ, D. and Wiedermann, Alexander}, title = {Experimental and numerical analysis of natural bio and syngas swirl flames in a model gas turbine combustor}, series = {Journal of Thermal Science}, volume = {25}, journal = {Journal of Thermal Science}, number = {5}, publisher = {Springer}, doi = {10.1007/s11630-016-0885-4}, pages = {460 -- 469}, year = {2016}, language = {en} } @article{PrataDezitterDaviesetal.2016, author = {Prata, A. J. and Dezitter, F. and Davies, I. and Weber, Konradin and Birnfeld, M. and Moriano, D. and Bernardo, C. and Vogel, A. and Prata, G. S. and Mather, T. A. and Thomas, H. E. and Cammas, J. and Weber, M.}, title = {Artificial cloud test confirms volcanic ash detection using infrared spectral imaging}, series = {Scientific reports}, volume = {6}, journal = {Scientific reports}, publisher = {Springer Nature}, doi = {10.1038/srep25620}, year = {2016}, abstract = {Airborne volcanic ash particles are a known hazard to aviation. Currently, there are no means available to detect ash in flight as the particles are too fine (radii < 30 μm) for on-board radar detection and, even in good visibility, ash clouds are difficult or impossible to detect by eye. The economic cost and societal impact of the April/May 2010 Icelandic eruption of Eyjafjallaj{\"o}kull generated renewed interest in finding ways to identify airborne volcanic ash in order to keep airspace open and avoid aircraft groundings. We have designed and built a bi-spectral, fast-sampling, uncooled infrared camera device (AVOID) to examine its ability to detect volcanic ash from commercial jet aircraft at distances of more than 50 km ahead. Here we report results of an experiment conducted over the Atlantic Ocean, off the coast of France, confirming the ability of the device to detect and quantify volcanic ash in an artificial ash cloud created by dispersal of volcanic ash from a second aircraft. A third aircraft was used to measure the ash in situ using optical particle counters. The cloud was composed of very fine ash (mean radii ~10 μm) collected from Iceland immediately after the Eyjafjallaj{\"o}kull eruption and had a vertical thickness of ~200 m, a width of ~2 km and length of between 2 and 12 km. Concentrations of ~200 μg m(-3) were identified by AVOID at distances from ~20 km to ~70 km. For the first time, airborne remote detection of volcanic ash has been successfully demonstrated from a long-range flight test aircraft.}, language = {en} } @article{AslanTaymazBenim2015, author = {Aslan, Erman and Taymaz, Imdat and Benim, Ali Cemal}, title = {Investigation of LBM curved boundary treatments for unsteady flows}, series = {European Journal of Mechanics - B/Fluids}, volume = {51}, journal = {European Journal of Mechanics - B/Fluids}, publisher = {Elsevier}, doi = {10.1016/j.euromechflu.2015.01.004}, pages = {68 -- 74}, year = {2015}, language = {en} } @article{TaymazAslanBenim2015, author = {Taymaz, Imdat and Aslan, Erman and Benim, Ali Cemal}, title = {Numerical investigation of incompressible fluid flow and heat transfer across a bluff body in a channel flow}, series = {Thermal Science}, volume = {19}, journal = {Thermal Science}, number = {2}, publisher = {doiSerbia}, doi = {10.2298/tsci120220145t}, pages = {537 -- 547}, year = {2015}, language = {en} } @article{BirmiliRehnVogeletal.2013, author = {Birmili, Wolfram and Rehn, Johanna and Vogel, Andreas and Boehlke, Christoph and Weber, Konradin and Rasch, Fabian}, title = {Micro-scale variability of urban particle number and mass concentrations in Leipzig, Germany}, series = {Meteorologische Zeitschrift}, volume = {22}, journal = {Meteorologische Zeitschrift}, number = {2}, publisher = {Borntr{\"a}ger}, doi = {10.1127/0941-2948/2013/0394}, pages = {155 -- 165}, year = {2013}, language = {en} } @article{HeninStelmaszczykPetrarcaetal.2013, author = {Henin, S. and Stelmaszczyk, K. and Petrarca, M. and Rohwetter, P. and Hao, Z. Q. and L{\"u}der, J. and Petit, Y. and Vogel, A. and Weber, Konradin and Kasparian, J. and W{\"o}ste, L. and Wolf, J.-P.}, title = {Laser Filament Induced Water Condensation}, series = {EPJ Web of Conferences}, volume = {41}, journal = {EPJ Web of Conferences}, publisher = {edp sciences}, doi = {10.1051/epjconf/20134112008}, year = {2013}, abstract = {C Owned by the authors, published by EDP Sciences, 2013}, language = {en} } @article{JolyPetrarcaVogeletal.2013, author = {Joly, P. and Petrarca, M. and Vogel, A. and Pohl, T. and Nagy, T. and Jusforgues, Q. and Simon, P. and Kasparian, J. and Weber, K. and Wolf, J.-P.}, title = {Laser-induced condensation by ultrashort laser pulses at 248 nm}, series = {Applied Physics Letters}, volume = {102}, journal = {Applied Physics Letters}, number = {9}, publisher = {AIP}, doi = {10.1063/1.4794416}, year = {2013}, language = {en} } @article{AndersWeinbergReichardt2012, author = {Anders, Denis and Weinberg, Kerstin and Reichardt, Roland}, title = {Isogeometric analysis of thermal diffusion in binary blends}, series = {Computational Materials Science}, volume = {52}, journal = {Computational Materials Science}, number = {1}, publisher = {Elsevier}, doi = {10.1016/j.commatsci.2011.01.008}, pages = {182 -- 188}, year = {2012}, language = {de} } @article{AslanNahavandiTaymazetal.2012, author = {Aslan, Erman and Nahavandi, A. and Taymaz, I. and Benim, Ali Cemal}, title = {A note on modelling non-rectangular boundaries by the Lattice Boltzmann Method}, series = {Progress in Computational Fluid Dynamics, An International Journal}, volume = {12}, journal = {Progress in Computational Fluid Dynamics, An International Journal}, number = {6}, publisher = {inderscience}, doi = {10.1504/pcfd.2012.049815}, pages = {433 -- 438}, year = {2012}, language = {en} } @article{BenimOzkanCaganetal.2007, author = {Benim, Ali Cemal and Ozkan, K. and Cagan, M. and Gunes, D.}, title = {Computational investigation of turbulent jet impinging onto rotating disk}, series = {International Journal of Numerical Methods for Heat \& Fluid Flow}, volume = {17}, journal = {International Journal of Numerical Methods for Heat \& Fluid Flow}, number = {3}, publisher = {Emerald}, doi = {10.1108/09615530710730157}, pages = {284 -- 301}, year = {2007}, language = {en} } @article{BenimEppleKrohmer2005, author = {Benim, Ali Cemal and Epple, B. and Krohmer, B.}, title = {Modelling of pulverised coal combustion by a Eulerian-Eulerian two-phase flow formulation}, series = {Progress in Computational Fluid Dynamics, An International Journal}, volume = {5}, journal = {Progress in Computational Fluid Dynamics, An International Journal}, number = {6}, publisher = {inderscience}, doi = {10.1504/pcfd.2005.007067}, pages = {345}, year = {2005}, language = {en} } @article{BenimNahavandiSyed2005, author = {Benim, Ali Cemal and Nahavandi, A. and Syed, Khawar J.}, title = {URANS and LES analysis of turbulent swirling flows}, series = {Progress in Computational Fluid Dynamics, An International Journal}, volume = {5}, journal = {Progress in Computational Fluid Dynamics, An International Journal}, number = {8}, publisher = {inderscience}, doi = {10.1504/pcfd.2005.007680}, year = {2005}, language = {en} } @article{MaqablehAmmourahKhadrawietal.2012, author = {Maqableh, A. M. and Ammourah, S. A. and Khadrawi, A. F. and Al-Nimr, M. A. and Benim, Ali Cemal}, title = {Hydrodynamics behaviour of a fluid flow in micro-venturi}, series = {Candian Journal of Physics}, volume = {90}, journal = {Candian Journal of Physics}, number = {1}, publisher = {Canadian Science Publishing}, organization = {Canadian Science Publishing}, doi = {10.1139/p11-145}, pages = {83 -- 89}, year = {2012}, language = {en} } @article{WinklerBeckerDoolanetal.2012, author = {Winkler, Michael and Becker, Klaus and Doolan, Con and Kameier, Frank and Paschereit, Christian Oliver}, title = {Aeroacoustic Effects of a Cylinder-Plate Configuration}, series = {AIAA Journal}, volume = {50}, journal = {AIAA Journal}, number = {7}, publisher = {ARC}, doi = {10.2514/1.j051578}, pages = {1614 -- 1620}, year = {2012}, language = {en} } @article{BenimEscudierNahavandietal.2011, author = {Benim, Ali Cemal and Escudier, M. P. and Nahavandi, A. and Nickson, A. K. and Syed, Khawar J. and Joos, F.}, title = {Computational analysis of incompressible turbulent flow in an idealised swirl combustor}, series = {Progess in Computational Fluid Dynamics, An International Journal}, volume = {11}, journal = {Progess in Computational Fluid Dynamics, An International Journal}, number = {1}, publisher = {inderscience}, doi = {10.1504/pcfd.2011.037571}, pages = {42 -- 45}, year = {2011}, language = {en} } @article{ChattopadhyayBenim2011, author = {Chattopadhyay, Himadri and Benim, Ali Cemal}, title = {Turbulent Heat Transfer Over a Moving Surface Due to Impinging Slot Jets}, series = {Journal of Heat Transfer}, volume = {133}, journal = {Journal of Heat Transfer}, number = {10}, publisher = {ASME}, doi = {10.1115/1.4004075}, year = {2011}, language = {en} } @article{EliassonPalssonWeber2011, author = {El{\´i}asson, J{\´o}nas and Palsson, Asgeir and Weber, Konradin}, title = {Monitoring ash clouds for aviation}, series = {Nature}, volume = {475}, journal = {Nature}, number = {7357}, publisher = {Springer Nature}, doi = {10.1038/475455b}, pages = {455}, year = {2011}, language = {en} } @article{MaqablehKhadrawiNimretal.2011, author = {Maqableh, A. M. and Khadrawi, A. F. and Nimr, M. AlA. and Ammourah, S. A. and Benim, Ali Cemal}, title = {Heat transfer characteristics of parallel and counter flow micro-channel heat exchangers with varying wall resistance}, series = {Progress in Computational Fluid Dynamics, An International Journal}, volume = {11}, journal = {Progress in Computational Fluid Dynamics, An International Journal}, number = {5}, publisher = {inderscience}, doi = {10.1504/pcfd.2011.042183}, pages = {318}, year = {2011}, language = {en} } @article{BenimEscudierNahavandietal.2010, author = {Benim, Ali Cemal and Escudier, Marcel and Nahavandi, Ali and Nickson, A. K. and Syed, Khawar J. and Joos, Franz}, title = {Experimental and numerical investigation of isothermal flow in an idealized swirl combustor}, series = {International Journal of Numerical Methods for Heat \& Fluid Flow}, volume = {20}, journal = {International Journal of Numerical Methods for Heat \& Fluid Flow}, number = {3}, publisher = {Emerald}, doi = {10.1108/09615531011024084}, pages = {348 -- 370}, year = {2010}, language = {en} } @misc{OPUS4-2981, title = {786 - Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Simulations- und Experimentaltechnik" an der Hochschule D{\"u}sseldorf vom 17.06.2021}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-29813}, pages = {7}, year = {2021}, abstract = {Aufgrund der \S\S 2 Abs. 4, 64 Abs. 1 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell g{\"u}ltigen Fassung hat die Hochschule D{\"u}sseldorf die folgende studiengangspezifische Pr{\"u}fungsordnung als Satzung erlassen. Diese Pr{\"u}fungsordnung gilt nur in Verbindung mit der Rahmenpr{\"u}fungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule D{\"u}sseldorf (RahmenPO) vom 15.02.2016 in der jeweils g{\"u}ltigen Fassung.}, subject = {Pr{\"u}fungsrecht}, language = {de} } @article{DeckertSchomaker2019, author = {Deckert, Carsten and Schomaker, Rahel M.}, title = {Kultur und Innovation - Wie sich kulturelle Faktoren auf die nationale Innovationsf{\"a}higkeit auswirken}, series = {Der Betriebswirt}, volume = {60}, journal = {Der Betriebswirt}, number = {2}, publisher = {Duncker \& Humblot}, issn = {2628-7846}, doi = {10.3790/dbw.60.2.18}, pages = {18 -- 23}, year = {2019}, language = {de} } @article{BenimFrankAssmannetal.2019, author = {Benim, Ali Cemal and Frank, Thiemo and Assmann, Alexander and Lichtenberg, Artur and Akhyari, Payam}, title = {Computational investigation of hemodynamics in hardshell venous reservoirs: A comparative study}, series = {Artificial Organs}, volume = {44}, journal = {Artificial Organs}, number = {4}, publisher = {Wiley}, issn = {1525-1594}, doi = {10.1111/aor.13593}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-29070}, pages = {411 -- 418}, year = {2019}, abstract = {Extracorporeal circulation using heart-lung-machines is associated with a profound activation of corpuscular and plasmatic components of circulating blood, which can also lead to deleterious events such as systemic inflammatory response and hemolysis. Individual components used to install the extracorporeal circulation have an impact on the level of activation, most predominantly membrane oxygenators and hardshell venous reservoirs as used in extracorporeal systems. The blood flows in two different hardshell reservoirs are computationally investigated. A special emphasis is placed on the prediction of an onset of transition and turbulence generation. Reynolds-averaged numerical simulations (RANS) based on a transitional turbulence model, as well as large eddy simulations (LES) are applied to achieve an accurate prediction. In the LES analysis, the non-Newtonian behavior of the blood is considered via the Carreau model. Blood damage potential is quantified applying the Modified Index of Hemolysis (MIH) based on the predicted flow fields. The results indicate that the flows in both reservoirs remain predominantly laminar. For one of the reservoirs, considerable turbulence generation is observed near the exit site, caused by the specific design for the connection with the drainage tube. This difference causes the MIH of this reservoir to be nearly twice as large as compared to the alternative design. However, a substantial improvement of these performance criteria can be expected by a local geometry modification.}, language = {en} } @article{NyssenGuillenDeckert2021, author = {Nyssen Guill{\´e}n, Viola Isabel and Deckert, Carsten}, title = {Cultural influence on innovativeness - links between "The Culture Map" and the "Global Innovation Index"}, series = {International Journal of Corporate Social Responsibility}, volume = {6}, journal = {International Journal of Corporate Social Responsibility}, number = {1}, publisher = {Springer Nature}, issn = {2366-0074}, doi = {10.1186/s40991-021-00061-x}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-29121}, pages = {7}, year = {2021}, language = {en} } @inproceedings{SpiegelAdam2019, author = {Spiegel, Thomas and Adam, Mario}, title = {Lastflexibilit{\"a}t in Wohngeb{\"a}uden f{\"u}r reale Stromnetze mit Transportbeschr{\"a}nkungen}, series = {10. Fachtagung Smart Energy and Systems, 04.-05.11.2019, Dortmund}, booktitle = {10. Fachtagung Smart Energy and Systems, 04.-05.11.2019, Dortmund}, address = {Dortmund}, year = {2019}, language = {de} } @misc{OPUS4-2978, title = {783 - Pr{\"u}fungsordnung f{\"u}r die Bachelorstudieng{\"a}nge „Energie- und Umwelttechnik" (EUT), „Umwelt- und Verfahrenstechnik" (UVT), „Maschinenbau Produktentwicklung" (MPE), „Maschinenbau Produktionstechnik" (MPT) und „Wirtschaftsingenieurwesen Maschinenbau" (WIM) an der Hochschule D{\"u}sseldorf vom 17.06.2021}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-29789}, pages = {12}, year = {2021}, abstract = {Aufgrund der \S\S 2 Abs. 4, 64 Abs. 1 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell g{\"u}ltigen Fassung hat die Hochschule D{\"u}sseldorf die folgende studiengangspezifische Pr{\"u}fungsordnung als Sat-zung erlassen. Diese Pr{\"u}fungsordnung gilt nur in Verbindung mit der Rahmenpr{\"u}fungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule D{\"u}sseldorf (RahmenPO) vom 15.02.2016 in der jeweils g{\"u}ltigen Fassung.}, subject = {Pr{\"u}fungsrecht}, language = {de} } @misc{OPUS4-2979, title = {784 - Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Internationales Wirtschaftsingenieurwesen" an der Hochschule D{\"u}sseldorf vom 17.06.2021}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-29798}, pages = {7}, year = {2021}, abstract = {Aufgrund der \S\S 2 Abs. 4, 64 Abs. 1 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell g{\"u}ltigen Fassung hat die Hochschule D{\"u}sseldorf die folgende studiengangspezifische Pr{\"u}fungsordnung als Satzung erlas-sen. Diese Pr{\"u}fungsordnung gilt nur in Verbindung mit der Rahmenpr{\"u}fungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule D{\"u}sseldorf (RahmenPO) vom 15.02.2016 in der jeweils g{\"u}ltigen Fassung.}, subject = {Pr{\"u}fungsrecht}, language = {de} } @misc{OPUS4-2980, title = {785 - Pr{\"u}fungsordnung f{\"u}r den Masterstudiengang „Mechanical Engineering" an der Hochschule D{\"u}sseldorf vom 17.06.2021}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-29801}, pages = {7}, year = {2021}, abstract = {Aufgrund der \S\S 2 Abs. 4, 64 Abs. 1 des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) vom 16.09.2014 (GV. NRW. S. 547) in der aktuell g{\"u}ltigen Fassung hat die Hochschule D{\"u}sseldorf die folgende studiengangspezifische Pr{\"u}fungsordnung als Satzung erlas-sen. Diese Pr{\"u}fungsordnung gilt nur in Verbindung mit der Rahmenpr{\"u}fungsordnung des Fachbereichs Maschinenbau und Verfahrenstechnik der Hochschule D{\"u}sseldorf (RahmenPO) vom 15.02.2016 in der jeweils g{\"u}ltigen Fassung.}, language = {de} } @article{BiedermannReichKameieretal.2019, author = {Biedermann, Till M. and Reich, Marius and Kameier, Frank and Adam, Mario}, title = {Assessment of statistical sampling methods and approximation models applied to aeroacoustic and vibroacoustic problems}, series = {Advances in Aircraft and Spacecraft Science}, volume = {6}, journal = {Advances in Aircraft and Spacecraft Science}, number = {6}, publisher = {Techno Press}, issn = {2287-528X}, doi = {10.12989/aas.2019.6.6.531}, pages = {529 -- 550}, year = {2019}, language = {en} } @article{EblingKrummPfeiffelmannetal.2016, author = {Ebling, Dirk and Krumm, A. and Pfeiffelmann, Bj{\"o}rn and Gottschald, J. and Bruchmann, J. and Benim, Ali Cemal and Adam, Mario and Labs, R. and Herbertz, R. R. and Stunz, A.}, title = {Development of a System for Thermoelectric Heat Recovery from Stationary Industrial Processes}, series = {Journal of Electronic Materials}, volume = {45}, journal = {Journal of Electronic Materials}, number = {7}, publisher = {Springer}, doi = {10.1007/s11664-016-4511-8}, pages = {3433 -- 3439}, year = {2016}, language = {de} } @article{Spiegel2018, author = {Spiegel, Thomas}, title = {Impact of Renewable Energy Expansion to the Balancing Energy Demand of Differential Balancing Groups}, series = {Journal of Sustainable Development of Energy, Water and Environment Systems}, volume = {6}, journal = {Journal of Sustainable Development of Energy, Water and Environment Systems}, number = {4}, publisher = {SDEWES}, issn = {1848-9257}, doi = {10.13044/j.sdewes.d6.0215}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-29207}, pages = {784 -- 799}, year = {2018}, abstract = {The research addresses the present situation on the German electricity market caused by variable renewable energy sources. The increasing number of households with photovoltaic and battery storage systems and their impacts require special attention. These systems change the traditional electricity customer from the sole electricity consumer to an electricity producer and consumer in one person. These so-called prosumers differ in their actual electricity demand from the initially estimated electricity demand with standard load profile. This discrepancy results in deviations within a differential balancing group. Thereby, the main finding of this research is a significant higher balancing energy demand with the expansion of photovoltaic and battery storage systems. Hence, the standard load profile is particularly not suitable for differential balancing groups with a high penetration of solar systems and still less suitable for groups with solar and battery storage systems}, language = {en} } @inproceedings{BackesAdamWirthetal.2018, author = {Backes, Klaus and Adam, Mario and Wirth, Hans Peter and G{\"o}tzelmann, Dennis and Helbig, Sonja and Eggert, Daniel}, title = {Efficient Design of Solar Assisted Heating Systems for Multi-Family Houses}, series = {Proceedings of EuroSun 2018, 12th International Conference on Solar Energy for Buildings and Industry, 10.-13.09.2018, Rapperswil / Switzerland, International Solar Energy Society}, booktitle = {Proceedings of EuroSun 2018, 12th International Conference on Solar Energy for Buildings and Industry, 10.-13.09.2018, Rapperswil / Switzerland, International Solar Energy Society}, editor = {H{\"a}berle, Andreas}, publisher = {International Solar Energy Society}, address = {Freiburg}, isbn = {978-3-9820408-0-6}, doi = {10.18086/eurosun2018.01.02​}, pages = {1 -- 9}, year = {2018}, language = {en} } @article{FrankRoedderNeefetal.2021, author = {Frank, Lena and R{\"o}dder, Maximilian and Neef, Matthias and Adam, Mario}, title = {Heating, Ventilation, Domestic Appliances - an Energy Integrated System Concept for the Household of the Future}, series = {Energy}, volume = {234}, journal = {Energy}, publisher = {Elsevier}, issn = {0360-5442}, doi = {10.1016/j.energy.2021.121303}, year = {2021}, language = {en} } @misc{OPUS4-2155, title = {695 - Gleichstellungsquoten f{\"u}r die Fachbereiche Architektur, Design, Elektro- und Informationstechnik, Maschinenbau und Verfahrenstechnik, Medien und Wirtschaftswissenschaften der Hochschule D{\"u}sseldorf gem{\"a}ß \S 37a HG NRW vom 19.05.2020}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-21555}, pages = {2}, year = {2020}, abstract = {Gem{\"a}ß \S 37a des Gesetzes {\"u}ber die Hochschulen des Landes Nordrhein-Westfalen (Hochschulgesetz - HG) in der Fassung des Gesetzes zur {\"A}nderung des Hochschulgesetzes vom 12. Juli 2019, hat das Pr{\"a}sidium im Einvernehmen mit der jeweiligen Dekanin bzw. dem jeweiligen Dekan die folgenden Gleichstellungsquoten (Gender-Diversity-Faktor; \S 3 Berufungsordnung vom 04.10.2016) f{\"u}r die Dauer von drei Jahren ab dem 01. Januar 2019 festgesetzt...}, language = {de} } @inproceedings{RoedderNeefLauxetal.2015, author = {R{\"o}dder, Maximilian and Neef, Matthias and Laux, Christoph and Priebe, Klaus-P.}, title = {Systematic Fluid Selection for Organic Rankine Cycles (ORC) and Performance Analysis for a Combined High and Low Temperature Cycle}, series = {Volume 3: Coal, Biomass and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration}, booktitle = {Volume 3: Coal, Biomass and Alternative Fuels; Cycle Innovations; Electric Power; Industrial and Cogeneration}, publisher = {American Society of Mechanical Engineers}, organization = {International Gas Turbine Institute}, isbn = {978-0-7918-5667-3}, doi = {10.1115/GT2015-42432}, year = {2015}, abstract = {The organic Rankine cycle (ORC) is an established thermodynamic process that converts waste heat to electric energy. Due to the wide range of organic working fluids available the fluid selection adds an additional degree of freedom to the early design phase of an ORC process. Despite thermodynamic aspects such as the temperature level of the heat source, other technical, economic and safety aspects have to be considered. For the fluid selection process in this paper, 22 criteria were identified in six main categories while distinguishing between elimination and tolerance criteria. For an ORC design, the suggested method follows a practical engineering approach and can be used as a structured way to limit the number of interesting working fluids before starting a detailed performance analysis of the most promising candidates. For the first time the selection process is applied to a two-stage reference cycle which uses the waste heat of a large reciprocating engine for cogeneration power plants. It consists of a high temperature and a low temperature cycle in which the condensation heat of the high temperature (HT) cycle provides the heat input of the low temperature (LT) cycle. After the fluid selection process the detailed thermodynamic cycle design is carried out with a thermodynamic design tool that also includes a database for organic working fluids. The investigated ORC cycle shows a net thermal efficiency of about 17,4\% in the high temperature cycle with Toluene as the working fluid and 6,2\% in low temperature cycle with iso-Butane as the working fluid. The electric efficiency of the cogeneration plant increases from 40,4\% to 46,97\% with the both stages of the two-stage ORC in operation.}, language = {en} } @inproceedings{HelmSpliethoffNeef2007, author = {Helm, Peter and Spliethoff, Hartmut and Neef, Matthias}, title = {Closing the Gap: Measuring Bristle Blow Down of Brush Seals}, series = {19 th International Conference on Fluid Sealing, Poitiers}, booktitle = {19 th International Conference on Fluid Sealing, Poitiers}, address = {Poitiers}, year = {2007}, language = {en} } @inproceedings{NeefHepermannSuerkenetal.2007, author = {Neef, Matthias and Hepermann, Florian and S{\"u}rken, Norbert and Schettel, Joachim}, title = {Brush Seal Porosity Modeling: Applicability and Limitations}, series = {ETC7 - 7th Conference on Turbomachinery, Athens}, booktitle = {ETC7 - 7th Conference on Turbomachinery, Athens}, address = {Athens}, year = {2007}, language = {en} } @inproceedings{NeefHummel2000, author = {Neef, Matthias and Hummel, Dietrich}, title = {Euler solutions for a finite-span flapping wing}, series = {"Fixed, flapping and rotary wing vehicles at very low Reynolds numbers, Notre Dame, Indiana, USA}, booktitle = {"Fixed, flapping and rotary wing vehicles at very low Reynolds numbers, Notre Dame, Indiana, USA}, year = {2000}, language = {en} } @article{Deckert2019, author = {Deckert, Carsten}, title = {Spannungsfelder der Teamkreativit{\"a}t: Wie Teamklima und -kontext zur Kreativit{\"a}t beitragen}, series = {Ideen und Innovationsmanagement}, journal = {Ideen und Innovationsmanagement}, number = {4}, issn = {2198-3143}, pages = {116 -- 120}, year = {2019}, abstract = {Dieser Beitrag untersucht die Spannungsfelder der Teamkreativit{\"a}t. Die Spannungsfelder basieren auf einer grundlegenden Spannung aus Originalit{\"a}t und Effektivit{\"a}t, die der Standarddefinition der Kreativit{\"a}t zugrunde liegt. Es lassen sich auf Basis des Teamklimas und -kontextes Spannungsfelder hinsichtlich Konformit{\"a}t, Konsens und Koh{\"a}sion identifizieren. Mit Bezug zur Konformit{\"a}t m{\"u}ssen Teams ein positives Spannungsfeld aus der Unterst{\"u}tzung f{\"u}r Innovation und Aufgabenorientierung erreichen, um gleichzeitig Experimentierfreude zu f{\"o}rdern und hohe Qualit{\"a}tsanspr{\"u}che zu erzielen. Konsens entsteht im Spannungsfeld aus konstruktivem Konflikt und partizipatorischer Entscheidungsfindung. Bei der Koh{\"a}sion besteht eine Spannung zwischen der Teamidentit{\"a}t (Geborgenheit) und den individuellen Identit{\"a}ten der Teammitglieder (Diversit{\"a}t). Der Beitrag beschreibt, wie diese drei Spannungsfelder zusammenarbeiten, wenn außergew{\"o}hnliche Kreativit{\"a}t in Teams entsteht.}, subject = {Teamwork}, language = {de} } @techreport{RingsDeckert2020, author = {Rings, J{\o}rn and Deckert, Carsten}, title = {Innovation Spaces: Einfluss der physischen Arbeitsumgebung auf kreatives Denken in B{\"u}roumgebungen}, publisher = {Hochschule D{\"u}sseldorf}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, issn = {2627-8375}, doi = {10.20385/2627-8375_2}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-20503}, pages = {34}, year = {2020}, abstract = {Das vorliegende Working Paper untersucht den Einfluss der physischen Arbeitsumgebung auf die Kreativit{\"a}t in Unternehmen. Dabei werden sowohl Aspekte der individuellen Kreativit{\"a}t als auch der Corporate Creativity (organisationalen Kreativit{\"a}t) betrachtet. Das Ergebnis ist eine Raumtypologie, die Funktionen eines Raumes in die beiden Achsen „Handeln vs. Geschehen-Lassen" und „R{\"u}ckzug vs. Begegnung" einteilt und dadurch vier unterschiedliche Raumtypen im Hinblick auf die Kreativit{\"a}t unterscheidet. Diese vier Raumtypen sind die Grundlage f{\"u}r das Verst{\"a}ndnis von Innovation Spaces - r{\"a}umlichen Fl{\"a}chen im Unternehmen, die die Kreativ- und Ideenarbeit unterst{\"u}tzen. Das Wirken und die Ausgestaltung dieser unterschiedlichen Funktionen wird anhand von zwei Umsetzungsbeispiele von realisierten Innovation Spaces dargestellt und anhand der Ergebnisse einer Studie zu Akzeptanz und Erfolg von Innovation Spaces untersucht. Daraus werden Handlungsempfehlungen an Unternehmen herausgearbeitet, die Innovation Spaces als Teil einer Innovationskultur im Kontext von New Work begreifen.}, subject = {Arbeitsplatz}, language = {de} } @article{BaierNeef2019, author = {Baier, Andr{\´e} and Neef, Matthias}, title = {Studierende lehren und lernen sozial-{\"o}kologische Verantwortung}, series = {Die Neue Hochschule}, volume = {60}, journal = {Die Neue Hochschule}, number = {5}, organization = {Hochschullehrerbund - Bundesvereinigung - e.V. (hlb)}, pages = {8 -- 11}, year = {2019}, language = {de} } @inproceedings{NeefFusseneckerNiemannetal.2018, author = {Neef, Matthias and Fussenecker, Claudia and Niemann, J{\"o}rg and Zielke, Thomas}, title = {Publish your undergraduate research! A mandatory course for master students in engineering}, series = {Creativity, innovation and entrepreneurship for engineering education excellence : proceedings of the 46th SEFI Annual Conference 2018, Copenhagen, Denmark}, booktitle = {Creativity, innovation and entrepreneurship for engineering education excellence : proceedings of the 46th SEFI Annual Conference 2018, Copenhagen, Denmark}, editor = {Clark, Robin and Munkebo Hussmann, Peter and J{\"a}rvinen, Hannu-Matti}, publisher = {SEFI - Soci{\´e}t{\´e} Europ{\´e}enne pour la Formation des Ing{\´e}nieurs}, address = {Brussels}, organization = {European Society for Engineering Education SEFI}, isbn = {978-2-87352-016-8}, year = {2018}, abstract = {Undergraduate students in engineering often have little exposure to the world of scientific publishing and the culture of sharing research work. While the beneficial exchange between research and teaching is well promoted, while the benefits of conference participation for students have already been surveyed and while courses on scientific writing are readily available, the concept of mini-conferences as part of the curriculum combines all three aspects into one. Therefore, the course "Engineering Conferences" was developed and installed as a mandatory part of a master program for engineering students. The idea is to go beyond simply teaching the standards of academic writing and skills for using scientific publications. By using a learner-centered approach, the students are engaged in typical activities around an active attendance of a real conference. Based on their bachelor thesis, they write a paper complying with common academic standards, submit the paper and review submissions of their fellow students. They also produce a poster and defend their work in a poster session held publicly on campus. This contribution is based on the experience from the first four terms teaching the course. It explains the didactic rationale behind the concept and individual teaching modules, it comprises the collection of useful resources for teaching and organizing scientific publishing and it includes the consequences drawn from course evaluation results.}, language = {en} } @article{DeuseDeckert2006, author = {Deuse, Jochen and Deckert, Carsten}, title = {Lean steel production - Slim production process in the steel industry}, series = {Stahl und Eisen}, volume = {126}, journal = {Stahl und Eisen}, number = {6}, pages = {84 -- 86}, year = {2006}, language = {de} } @incollection{DuPreezSchweigerDeckert2004, author = {Du Preez, Niek and Schweiger, Stefan and Deckert, Carsten}, title = {Wissensaustausch im Unternehmen}, series = {Vital mit KOPF: Wertsch{\"o}pfung durch Wissensmanagement}, booktitle = {Vital mit KOPF: Wertsch{\"o}pfung durch Wissensmanagement}, editor = {Deckert, Klaus}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3409125659}, doi = {10.1007/978-3-322-87022-3_10}, pages = {207 -- 227}, year = {2004}, language = {de} } @article{EversheimBauernhanslDeckertetal.2001, author = {Eversheim, Walter and Bauernhansl, Thomas and Deckert, Carsten and Kampker, Achim and H{\"a}rtung, Stefan and H. von der Ohe, Carsten}, title = {Vom Marktteilnehmer zum Marktgestalter: Innovatives Denken er{\"o}ffnet neue Wachstumsperspektiven im Maschinen- und Anlagenbau}, series = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, volume = {96}, journal = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, number = {10}, publisher = {Hanser}, doi = {10.3139/104.100475}, pages = {522 -- 524}, year = {2001}, abstract = {Innovative thinking opens up new growth prospects in mechanical and plant engineering. Mechanical and plant engineering has been traditionally very important to the industrial location of Germany [1]. With an export share of 70\%, it has a considerable direct influence on economic structure and job market. In addition, mechanical engineering is the "innovation engine" for other core industries in Germany - as supplier of production equipment for industries such as the car manufacture, plastics processing and electrical engineering sectors. Only through this production equipment can innovative products reach production readiness in the first place, and can "Made in Germany" continue to enjoy an excellent reputation all over the world.}, language = {de} } @techreport{SchererDeckert2013, author = {Scherer, Anke and Deckert, Carsten}, title = {The Dao of Innovation: What European innovators can learn from philosophical Daoism}, publisher = {EAMSA - Euro-Asia Management Studies Association}, address = {Duisburg}, organization = {EAMSA - Euro-Asia Management Studies Association}, year = {2013}, abstract = {The article argues that European innovators can profit from some of the concepts of philosophical Daoism, namely "wu-wei" (non-interference) and "ziran" ("go with the flow"). Whereas most Western approaches to innovation emphasize the different stages of the creative process as well as tools to enhance creativity, the Daoist world view allows for the mind to just wander and thus spontaneously discover the solution to a problem in a rather detached state of mind. Creative minds need space for personal development and the permission to wander around without being exposed to control and instant judgement on the results. Training individuals in the tools and techniques of problem solving and creativity as the common approach in innovation management is certainly necessary, but in the end it is the intellectual accomplishment of a creative mind that produces innovation. Managers can allow this to happen when they get the balance of control and non-interference right.}, language = {en} } @article{Deckert2013, author = {Deckert, Carsten}, title = {Internal Innovation Scouting - Potenziale f{\"u}r radikale Innovation}, series = {MQ - Management und Qualit{\"a}t}, volume = {43}, journal = {MQ - Management und Qualit{\"a}t}, number = {1}, pages = {12 -- 14}, year = {2013}, abstract = {In Zeiten zunehmender Marktdynamik und k{\"u}rzer werdender Innovationszyklen fragen sich viele Unternehmen: Wie k{\"o}nnen wir das kreative Potenzial unserer eigenen Mitarbeiter besser nutzen? Denn es gibt sie in jeder Organisation: Leute, die das radikal Neue nicht nur denken, sondern auch umsetzen wollen.}, language = {de} } @incollection{DeckertDeckertWittberg2004, author = {Deckert, Carsten and Deckert, Klaus and Wittberg, Volker}, title = {Unternehmensspezifisches Wissensmanagement}, series = {Vital mit KOPF: Wertsch{\"o}pfung durch Wissensmanagement}, booktitle = {Vital mit KOPF: Wertsch{\"o}pfung durch Wissensmanagement}, editor = {Deckert, Klaus}, publisher = {Springer Gabler}, address = {Wiesbaden}, isbn = {978-3409125659}, pages = {9 -- 29}, year = {2004}, language = {de} }