@inproceedings{KramerLernerSacheretal.2018, author = {Kramer, Tim and Lerner, Igor and Sacher, Patrick and Neef, Matthias and Baier, Andr{\´e}}, title = {Blue Engineering: Was ist das und wie gelingt die Implementierung an meiner Hochschule?}, series = {Diversit{\"a}t und Kulturelle Vielfalt - Differenzieren, Individualisieren - oder Integrieren? Wege zu technischer Bildung : Referate der 13. Ingenieurp{\"a}dagogischen Regionaltagung 2018 and der Hochschule Bochum vom 7.-9. Juni 2018}, booktitle = {Diversit{\"a}t und Kulturelle Vielfalt - Differenzieren, Individualisieren - oder Integrieren? Wege zu technischer Bildung : Referate der 13. Ingenieurp{\"a}dagogischen Regionaltagung 2018 and der Hochschule Bochum vom 7.-9. Juni 2018}, editor = {Dederichs-Koch, Andrea and Mohnert, Andrea and Kammasch, Gudrun}, publisher = {Ingenieur-P{\"a}dagogische Wissensgesellschaft (IPW)}, address = {Berlin}, isbn = {978-3-9818728-2-8}, year = {2018}, language = {de} } @inproceedings{FesekerKinellNeef2017, author = {Feseker, Daniel and Kinell, Mats and Neef, Matthias}, title = {Experimental Study on Pressure Losses in Circular Orifices With Inlet Cross Flow}, series = {Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2017: presented at the ASME Turbo Expo 2017: Turbine Technical Conference and Exposition, June 26-30, 2017}, booktitle = {Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2017: presented at the ASME Turbo Expo 2017: Turbine Technical Conference and Exposition, June 26-30, 2017}, editor = {The American Society of Mechanical Engineers,}, publisher = {The American Society of Mechanical Engineers}, address = {New York}, isbn = {978-0-7918-5088-6}, doi = {10.1115/GT2017-64143}, year = {2017}, abstract = {The ability to understand and predict the pressure losses of orifices is important in order to improve the air flow within the secondary air system. This experimental study investigates the behavior of the discharge coefficient for circular orifices with inlet cross flow which is a common flow case in gas turbines. Examples of this are at the inlet of a film cooling hole or the feeding of air to a blade through an orifice in a rotor disk. Measurements were conducted for a total number of 38 orifices, covering a wide range of length-to-diameter ratios, including short and long orifices with varying inlet geometries. Up to five different chamfer-to-diameter and radius-to-diameter ratios were tested per orifice length. Furthermore, the static pressure ratio across the orifice was varied between 1.05 and 1.6 for all examined orifices. The results of this comprehensive investigation demonstrate the beneficial influence of rounded inlet geometries and the ability to decrease pressure losses, which is especially true for higher cross flow ratios where the reduction of the pressure loss in comparison to sharp-edged holes can be as high as 54\%. With some exceptions, the chamfered orifices show a similar behavior as the rounded ones but with generally lower discharge coefficients. Nevertheless, a chamfered inlet yields lower pressure losses than a sharp-edged inlet. The obtained experimental data were used to develop two correlations for the discharge coefficient as a function of geometrical as well as flow properties.}, language = {en} } @inproceedings{FrankRoedderNeefetal.2017, author = {Frank, Lena and R{\"o}dder, Maximilian and Neef, Matthias and Adam, Mario}, title = {Heizung, L{\"u}ftung, Weiße Ware - ein integriertes Systemkonzept f{\"u}r das Haus der Zukunft}, series = {Deutsche K{\"a}lte- und Klimatagung 2017 Bremen}, booktitle = {Deutsche K{\"a}lte- und Klimatagung 2017 Bremen}, address = {Stuttgart}, isbn = {9783932715938}, pages = {1028 -- 1041}, year = {2017}, language = {de} } @inproceedings{ZielkeNeefFussenecker2017, author = {Zielke, Thomas and Neef, Matthias and Fussenecker, Claudia}, title = {Teaching Engineering Conferences}, series = {Proceedings of the Canadian Engineering Education Association (CEEA) Conference}, booktitle = {Proceedings of the Canadian Engineering Education Association (CEEA) Conference}, address = {Winnipeg}, organization = {Canadian Engineering Education Association (CEEA)}, year = {2017}, abstract = {This article is on a university course called Engineering Conferences. It has been developed by the authors and installed as a mandatory part of the curriculum in three master's degree programs for engineering students. The participants of the course are postgraduates with different nationalities, mostly German, and different technical backgrounds. They study Mechanical Engineering, Simulation and Experimental Technology, or International Business Engineering. The basic idea of the course concept goes far beyond simply teaching the standards of academic writing and skills for using scientific publications. By using a learnercentered approach, the students get engaged in typical activities around an active attendance of a real conference. Students learn to locate the field of their bachelor thesis or project report in the world of research communities, scientific journals and engineering conferences. They learn about conferences matching their bachelor/project topic. They write a paper complying with common academic standards, submit it to a mock-up conference, and review submissions of their fellow students. Students also produce a poster and have to defend it in a poster session held publicly on the campus. Engineering Conferences is a course on scientific communication and presentation that also aims at the development of other skills and competences needed in the world of modern engineering.}, language = {en} } @inproceedings{LauxGoebelNeefetal.2015, author = {Laux, Christoph and Goebel, Johannes and Neef, Matthias and Gotter, Andreas}, title = {Investigation in the Technical and Economic Feasibility of a Low-Pressure Steam Cycle for the Waste Heat Utilization of a Cogeneration Plant}, series = {Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2015 : presented at the ASME 2015 Turbo Expo: Turbine Technical Conference and Exposition, June 15 - 19, 2015, Montreal, Quebec, Canada / sponsored by the International Gas Turbine Institute}, volume = {3: Coal, biomass and alternative fuels - cycle innovations - electric power - industrial and cogeneration}, booktitle = {Proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2015 : presented at the ASME 2015 Turbo Expo: Turbine Technical Conference and Exposition, June 15 - 19, 2015, Montreal, Quebec, Canada / sponsored by the International Gas Turbine Institute}, publisher = {International Gas Turbine Institute (ASME)}, address = {New York}, isbn = {978-0-7918-5667-3}, year = {2015}, abstract = {This paper deals with the investigation in the technical and economic feasibility of a low-pressure steam cycle for the waste heat utilization of a combined heat and power (CHP) plant. The proposed steam cycle uses a pressure level below atmospheric pressure which allows to use the heat from the motor's coolant for evaporation. The cycle is designed to increase the maximum electrical efficiency of a gas fired reciprocating engine and to increase operational flexibility for varying heat demand. Since organic Rankine cycle (ORC) plants are already being successfully used for waste heat recovery, advantages of the low-pressure steam Rankine cycle (SRC) over an ORC are highlighted. Many ORC fluids are toxic or flammable and thus have an increased risk potential compared to water. An additional advantage of water compared to ORC fluids is the possibility of superheating above 500 °C. The technical feasibility of the proposed cycle is studied by the detailed design of the individual system components such as turbine, heat exchangers and auxiliary parts. This includes the detailed thermodynamic design of the full cycle for the calculation of plant efficiencies. As a basis for future experimental investigations, a cogeneration plant with an electrical output of 50 kWel was selected as a heat source for the steam cycle. The design geometries of the turbine and the heat exchanger are presented along with efficiency and cost predictions. A subsonic radial turbine with a rotational speed of 155,000 rpm was selected. The maximum turbine output is about 7.5 kW. The use of a flash evaporator is investigated to reduce the size and the costs for the evaporator. The suggested steam cycle helps to increase the electrical efficiency of the CHP plant by 4.5\% points from an original 36.5\% to 41.0\%. The steam cycle itself has an electrical efficiency of approximately 9\%. Additionally, the condensation temperature in this steam cycle is high enough to be extracted as useful heat output to generate domestic water with a temperature of 50°C.}, language = {en} } @inproceedings{RoedderSpiegelFranketal.2019, author = {R{\"o}dder, Maximilian and Spiegel, Thomas and Frank, Lena and Neef, Matthias and Adam, Mario}, title = {Integration eines multifunktionalen W{\"a}rmepumpensystems als Hardware-in-the-Loop in ein Niederspannungsnetzmodell}, series = {Smart Energy and Systems 2019: Digitalisierung - Anwendungen in Technik und Industriegesellschaft, 10. Fachtagung, 04.-05.11.2019, Dortmund}, booktitle = {Smart Energy and Systems 2019: Digitalisierung - Anwendungen in Technik und Industriegesellschaft, 10. Fachtagung, 04.-05.11.2019, Dortmund}, editor = {Großmann, Uwe and Kunold, Ingo}, publisher = {vwh Verlag Werner H{\"u}lsbusch Fachverlag f{\"u}r Medientechnik und -wirtschaft}, address = {Gl{\"u}ckstadt}, pages = {70 -- 77}, year = {2019}, language = {de} } @inproceedings{NeefAndre2019, author = {Neef, Matthias and Andr{\´e}, Baier}, title = {Blue Engineering: Ingenieur_innen mit {\"o}kologischer und sozialer Verantwortung - ein Studierenden-getriebenes, modulares Seminar-Konzept}, series = {DGHD-Jahrestagung}, booktitle = {DGHD-Jahrestagung}, publisher = {Universit{\"a}t Leipzig}, address = {Leipzig}, organization = {Universit{\"a}t Leipzig}, year = {2019}, language = {de} } @inproceedings{RuessVarduhnRanketal.2012, author = {Ruess, Martin and Varduhn, Vasco and Rank, Ernst and Yosibash, Zohar}, title = {A Parallel High-Order Fictitious Domain Approach for Biomechanical Applications}, series = {11th International Symposium on Parallel and Distributed Computing (ISPDC), 2012 : 25 - 29 June 2012, Munich, Germany ; proceedings}, booktitle = {11th International Symposium on Parallel and Distributed Computing (ISPDC), 2012 : 25 - 29 June 2012, Munich, Germany ; proceedings}, editor = {Bader, Michael}, publisher = {IEEE}, address = {Piscataway}, isbn = {978-1-4673-2599-8}, doi = {10.1109/ISPDC.2012.45}, pages = {279 -- 285}, year = {2012}, language = {en} } @inproceedings{RuessMundaniRank2009, author = {Ruess, Martin and Mundani, Ralf-Peter and Rank, Ernst}, title = {Computational steering in dynamic structure simulation: An improved communication concept}, series = {2009 IEEE Toronto International Conference Science and Technology for Humanity (TIC-STH), Toronto, 26.09.2009 - 27.09.2009}, booktitle = {2009 IEEE Toronto International Conference Science and Technology for Humanity (TIC-STH), Toronto, 26.09.2009 - 27.09.2009}, publisher = {IEEE}, isbn = {978-1-4244-3877-8}, doi = {10.1109/TIC-STH.2009.5444450}, pages = {497 -- 502}, year = {2009}, language = {en} } @inproceedings{FriedrichLyssakowPearceetal.2016, author = {Friedrich, Linus and Lyssakow, Pawel and Pearce, Garth and Ruess, Martin and Bisagni, Chiara and Schr{\"o}der, Kai-Uwe}, title = {ON THE STRUCTURAL DESIGN OF IMPERFECTION SENSITIVE LAMINATED COMPOSITE SHELL STRUCTURES SUBJECTED TO AXIAL COMPRESSION}, series = {Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), 05.06.2016 - 10.06.2016, Crete Island}, booktitle = {Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), 05.06.2016 - 10.06.2016, Crete Island}, editor = {Papadrakakis, Manolis and Papadopoulos, V. and Stefanou, G. and Plevris, V.}, publisher = {Institute of Structural Analysis and Antiseismic Research School of Civil Engineering National Technical University of Athens (NTUA) Greece}, address = {Athens}, isbn = {978-618-82844-0-1}, doi = {10.7712/100016.1951.5838}, pages = {2182 -- 2189}, year = {2016}, language = {en} } @inproceedings{FriedrichRuessSchroeder2016, author = {Friedrich, Linus and Ruess, Martin and Schr{\"o}der, Kai-Uwe}, title = {Efficient and robust shell design of space launcher vehicle structures}, series = {57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, San Diego, 4-8 January 2016}, booktitle = {57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, San Diego, 4-8 January 2016}, publisher = {American Institute of Aeronautics and Astronautics}, address = {Reston}, isbn = {978-1-62410-392-6}, doi = {10.2514/6.2016-1973}, pages = {1 -- 18}, year = {2016}, language = {en} } @inproceedings{GuoRuess2015, author = {Guo, Yujie and Ruess, Martin}, title = {Isogeometric Weak Coupling of Shell Structures}, series = {56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2015, Kissimmee, Florida, USA, 5 - 9 January 2015}, booktitle = {56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 2015, Kissimmee, Florida, USA, 5 - 9 January 2015}, publisher = {Curran}, address = {Red Hook}, isbn = {978-1-62410-342-1}, doi = {10.2514/6.2015-0965}, pages = {1 -- 14}, year = {2015}, language = {en} } @inproceedings{LinditschFusseneckerNiemannetal.2018, author = {Linditsch, Claudia and Fussenecker, Claudia and Niemann, J{\"o}rg and Messnarz, Richard and Penz, Eva and Casey, Anette and Stolfa, Jakub}, title = {ELIC - Building the New Generation of Engineers for Automotive in Europe}, series = {Systems, Software and Services Process Improvement. 25th European Conference, EuroSPI 2018, Bilbao, Spain, September 5-7, 2018, Proceedings}, booktitle = {Systems, Software and Services Process Improvement. 25th European Conference, EuroSPI 2018, Bilbao, Spain, September 5-7, 2018, Proceedings}, editor = {Larrucea, Xabier and Santamaria, Izaskun and O'Connor, Rory V. and Messnarz, Richard}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-319-97924-3}, doi = {10.1007/978-3-319-97925-0_55}, pages = {654 -- 665}, year = {2018}, language = {en} } @inproceedings{GottschaldReichAdametal.2020, author = {Gottschald, Jonas and Reich, Marius and Adam, Mario and Leibauer, R.}, title = {Selbstlernende Betriebsoptimierung einer hybriden Nahw{\"a}rmeversorgung}, series = {Fachkonferenz Digitalisieren - Sektoren koppeln - Flexibilisieren, 24.11.2020, Berlin}, booktitle = {Fachkonferenz Digitalisieren - Sektoren koppeln - Flexibilisieren, 24.11.2020, Berlin}, address = {Berlin}, organization = {Fraunhofer IOSB}, year = {2020}, language = {de} } @inproceedings{AdamGottschaldReichetal.2019, author = {Adam, Mario and Gottschald, Jonas and Reich, Marius and G{\"o}tzelmann, Dennis}, title = {BestHeatNet - Selbstlernende Betriebsoptimierung einer hybriden Nahw{\"a}rmeversorgung}, series = {Der Geothermiekongress, 19.-21.11.2019, M{\"u}nchen}, booktitle = {Der Geothermiekongress, 19.-21.11.2019, M{\"u}nchen}, address = {M{\"u}nchen}, year = {2019}, language = {de} } @inproceedings{BiedermannReichKameieretal.2018, author = {Biedermann, Till M. and Reich, Marius and Kameier, Frank and Adam, Mario and Paschereit, C.}, title = {Assessment of Statistical Sampling Methods and Approximation Models Applied to Aeroacoustic and Vibroacoustic Problem}, series = {NOVEM - 6th conference on Noise and Vibration emerging methods, 07.-09.05.2018, Ibiza / Spain}, booktitle = {NOVEM - 6th conference on Noise and Vibration emerging methods, 07.-09.05.2018, Ibiza / Spain}, address = {Ibiza}, year = {2018}, language = {en} } @inproceedings{GottschaldAdamReich2018, author = {Gottschald, Jonas and Adam, Mario and Reich, Marius}, title = {Multi-Objective Optimization of a District Heating Networks Energy Supply Systems Structure and Dimension}, series = {SDH - 5th International Solar District Heating Conference, 11.-12.04.2018, Graz / Austria}, booktitle = {SDH - 5th International Solar District Heating Conference, 11.-12.04.2018, Graz / Austria}, address = {Graz}, organization = {SDH projects}, year = {2018}, language = {en} } @inproceedings{HelbigEggertAdam2018, author = {Helbig, Sonja and Eggert, Daniel and Adam, Mario}, title = {Einfluss von Speicheranschlussh{\"o}hen und geschichteter Speicherbe- und -entladung auf die Effizienz solarer Kombisysteme im Mehrfamilienhaus}, series = {Symposium Thermische Solarenergie - Energiewende W{\"a}rme, 13.-15.06.2018, Bad Staffelstein}, booktitle = {Symposium Thermische Solarenergie - Energiewende W{\"a}rme, 13.-15.06.2018, Bad Staffelstein}, address = {Bad Staffelstein}, year = {2018}, language = {de} } @inproceedings{IlleAdamGottschaldetal.2018, author = {Ille, Fabian and Adam, Mario and Gottschald, Jonas and Wirth, Hans Peter}, title = {Analysis of Ageing Phenomena for Big Solar Thermal Plants}, series = {ECOS - 31th International Conference on Efficiency, Cost, Optimization, Simulation and Enviromental Impact of Energy Systems, 17.-21.06.2018, Guimaraes / Portugal}, booktitle = {ECOS - 31th International Conference on Efficiency, Cost, Optimization, Simulation and Enviromental Impact of Energy Systems, 17.-21.06.2018, Guimaraes / Portugal}, address = {Guimaraes}, year = {2018}, language = {en} } @inproceedings{NoltingSpiegelReichetal.2018, author = {Nolting, Lars and Spiegel, Thomas and Reich, Marius and Adam, Mario and Praktiknjo, Aaron}, title = {Can Energy System Modeling benefit from Artificial Neural Networks? Application of Two-Stage Metamodels to Reduce Computation of Security of Supply Assessments (Best Application Paper Award)}, series = {CIE - 48th International Conference on Computers \& Industrial Engineering, 02.-05.12.2018, Auckland / New Zealand}, booktitle = {CIE - 48th International Conference on Computers \& Industrial Engineering, 02.-05.12.2018, Auckland / New Zealand}, address = {Auckland}, year = {2018}, language = {en} } @inproceedings{ReichAdamGottschald2018, author = {Reich, Marius and Adam, Mario and Gottschald, Jonas}, title = {Robust Optimization of District Heating Networks Structure and Dimension combining Metamodels and Multi-Objective Optimization}, series = {ECOS - 31th International Conference on Efficiency, Cost, Optimization, Simulation and Enviromental Impact of Energy Systems, 17.-21.06.2018, Guimaraes / Portugal}, booktitle = {ECOS - 31th International Conference on Efficiency, Cost, Optimization, Simulation and Enviromental Impact of Energy Systems, 17.-21.06.2018, Guimaraes / Portugal}, address = {Guimaraes}, year = {2018}, language = {en} } @inproceedings{SpiegelBackesAdametal.2018, author = {Spiegel, Thomas and Backes, Klaus and Adam, Mario and Helbig, Sonja and Eggert, Daniel}, title = {Best-Practice-L{\"o}sungen f{\"u}r Mehrfamilienh{\"a}user mit Solaranlage}, series = {Symposium Thermische Solarenergie - Energiewende W{\"a}rme, 13.-15.06.2018, Bad Staffelstein}, booktitle = {Symposium Thermische Solarenergie - Energiewende W{\"a}rme, 13.-15.06.2018, Bad Staffelstein}, address = {Bad Staffelstein}, year = {2018}, language = {de} } @inproceedings{DeckertKalefeldKutz2022, author = {Deckert, Carsten and Kalefeld, Jannik and Kutz, Martin}, title = {Business Model Innovation for the Internet of Things}, series = {Lecture Notes in Information Systems and Organisation: Digital Twins and New Business Models}, volume = {LNISO,volume 54}, booktitle = {Lecture Notes in Information Systems and Organisation: Digital Twins and New Business Models}, editor = {Kumar, Vikas and Leng, Jiewu and Akberdina, Victoria and Kuzmin, Evgeny}, publisher = {Springer Nature Switzerland}, address = {Cham}, isbn = {978-3-030-94617-3}, issn = {2195-4968}, doi = {10.1007/978-3-030-94617-3_23}, pages = {321 -- 333}, year = {2022}, language = {en} } @inproceedings{Adam2021, author = {Adam, Mario}, title = {K{\"u}nstliche Intelligenz zur Betriebsoptimierung eines Nahw{\"a}rmenetzes in Kempen mit verschiedenen regenerativen Energiequellen}, series = {Berliner Energietage, 22. April 2021, Berlin}, booktitle = {Berliner Energietage, 22. April 2021, Berlin}, publisher = {Berliner ENERGIETAGE EUMB P{\"o}schk}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, year = {2021}, language = {de} } @inproceedings{WinnitzkiSpiegelAdam2021, author = {Winnitzki, Michael and Spiegel, Thomas and Adam, Mario}, title = {Ans{\"a}tze des maschinellen Lernens f{\"u}r die Prognose des Strombedarfes von Ortsnetzstationen als Beitrag f{\"u}r Steuerungsaufgaben in der Niederspannung. Postersession}, series = {Innovationen im Verteilernetz: ETG-CIRED-Workshop 2021 (D-A-CH) 02.-03.11.2021, M{\"u}nchen}, booktitle = {Innovationen im Verteilernetz: ETG-CIRED-Workshop 2021 (D-A-CH) 02.-03.11.2021, M{\"u}nchen}, publisher = {VDE}, address = {M{\"u}nchen}, year = {2021}, language = {de} } @inproceedings{Gottschald2021, author = {Gottschald, Joans}, title = {Data Driven Model Predictive Control of a District Heating Network}, series = {Smart Energy Systems International Conference 2021, 21.09.2021,}, booktitle = {Smart Energy Systems International Conference 2021, 21.09.2021,}, publisher = {Hochschule D{\"u}sseldorf}, address = {D{\"u}sseldorf}, organization = {Hochschule D{\"u}sseldorf}, year = {2021}, language = {en} } @inproceedings{NeumannAdamBackesetal.2021, author = {Neumann, Hannah and Adam, Mario and Backes, Klaus and B{\"o}rner, Martin and Clees, Tanja and Doetsch, Christian and Glaeser, Susanne and Herrmann, Ulf and May, Johanna and Rosenthal, Florian and Sauer, Dirk Uwe and Stadler, Ingo}, title = {Development of open educational resources for renewable energy and the energy transition process}, series = {ISES SWC 2021: Solar World Congress Virtual Conference, 25.-29. Oktober 2021}, booktitle = {ISES SWC 2021: Solar World Congress Virtual Conference, 25.-29. Oktober 2021}, publisher = {International Solar Energy Society}, organization = {The International Solar Energy Society (ISES)}, doi = {10.18086/swc.2021.47.03}, year = {2021}, language = {en} } @inproceedings{Deckert2018, author = {Deckert, Carsten}, title = {Creative Heuristics in Engineering Education}, series = {46th SEFI Annual Conference in Copenhagen 17-21 September 2018 "Creativity, Innovation and Entrepreneurship for Engineering Education Excellence"}, booktitle = {46th SEFI Annual Conference in Copenhagen 17-21 September 2018 "Creativity, Innovation and Entrepreneurship for Engineering Education Excellence"}, address = {Copenhagen}, year = {2018}, language = {en} } @inproceedings{Deckert2014, author = {Deckert, Carsten}, title = {Why Some Ideas Refuse to Diffuse}, publisher = {KNect 365}, address = {M{\"u}nchen}, doi = {10.13140/RG.2.1.3379.2085}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-18193}, year = {2014}, abstract = {There is a popular saying in German: Innovation is when the market shouts "Hooray!". Thus, a new idea is only as good as its diffusion into the addressed social system. The question is what affects the adoption or rejection of a new idea. Carsten Deckert shares his experience on the main innovation resistances and on ways to increase the acceptance of new ideas. He talks about which perceived attributes of innovations are conducive to the rate of adoption of an innovation and which are characteristics of failed innovations.}, language = {en} } @inproceedings{EversheimDeckertWestekemper2000, author = {Eversheim, Walter and Deckert, Carsten and Westekemper, Markus}, title = {Increasing Efficiency through Integration of Freeform-Features into the CAD/CAM Chain}, series = {Product Data Technology Europe 2000}, booktitle = {Product Data Technology Europe 2000}, pages = {355 -- 362}, year = {2000}, language = {en} } @inproceedings{Deckert2016, author = {Deckert, Carsten}, title = {Tensions in Corporate Creativity}, series = {Book of Papers}, booktitle = {Book of Papers}, organization = {M-Sphere - Association for Promotion of Multidisciplinarity in Science and Business}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-18065}, pages = {79 -- 86}, year = {2016}, abstract = {The standard definition of creativity is based on a tension between originality and effectiveness. Borrowing from the wave-particle duality in physics one could say that there is an originality-effectiveness duality at work for creativity. The paper explores how this tension pervades Amabile's (1997) componential theory of organizational creativity with the components organizational motivation, management practices (including work assignment and work control) and resources. As a method the so called value square (" Wertequadrat ") developed by Helwig (1967) and Schulz von Thun (1998) is used which balances a value with its countervalue. The author identifies a tension of corporate tradition and corporate change for organizational motivation, a tension of skills and challenges for work assignment, a tension of management by control and management by loss of control for work control as well as a tension of organizational efficiency and organizational slack for resources. Additionally different implications of these tensions for the resistance of a company to creativity, for an organizational climate conducive to creativity as well as for resource allocation in creative endeavours are discussed.}, language = {en} } @inproceedings{StoehrZielke2023, author = {St{\"o}hr, Marcel and Zielke, Thomas}, title = {Machine Learning for Soft Sensors and an Application in Cement Production}, series = {Smart, Sustainable Manufacturing in an Ever-Changing World Proceedings of International Conference on Competitive Manufacturing (COMA '22)}, volume = {Lecture Notes in Production Engineering}, booktitle = {Smart, Sustainable Manufacturing in an Ever-Changing World Proceedings of International Conference on Competitive Manufacturing (COMA '22)}, editor = {Leipzig, Konrad von and Sacks, Natasha and Mc Clelland, Michelle}, publisher = {Springer Nature Switzerland}, address = {Cham}, isbn = {978-3-031-15604-5}, doi = {10.1007/978-3-031-15602-1_46}, pages = {627 -- 638}, year = {2023}, language = {en} } @inproceedings{BhattacharyyaJainBhattetal.2024, author = {Bhattacharyya, Suvanjan and Jain, Naman and Bhatt, Tapasvi and Ghosh, Soumya and Benim, Ali Cemal}, title = {Heat Transfer Augmentation in a Mini-channel Using Magnetic Nanofluid and Magnetic Vortex}, series = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, volume = {2}, booktitle = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031666087}, issn = {2195-4356}, doi = {10.1007/978-3-031-66609-4_1}, pages = {3 -- 11}, year = {2024}, subject = {W{\"a}rme{\"u}bertragung}, language = {en} } @inproceedings{BiswasMandalMannaetal.2024, author = {Biswas, Nirmalendu and Mandal, Dipak Kumar and Manna, Nirmal K. and Benim, Ali Cemal}, title = {Thermomagnetic Convection in a Hybrid Nanofluid-Filled Wavy-Walled Porous System with Protruded Bottom Heating}, series = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, volume = {2}, booktitle = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031666087}, issn = {2195-4356}, doi = {10.1007/978-3-031-66609-4_35}, pages = {375 -- 385}, year = {2024}, subject = {Numerische Str{\"o}mungssimulation}, language = {en} } @inproceedings{YalcınkayaDurmazTepeetal.2024, author = {Yal{\c{c}}{\i}nkaya, Orhan and Durmaz, Ufuk and Tepe, Ahmet {\"U}mit and Benim, Ali Cemal and Uysal, {\"U}nal}, title = {Numerical Analysis of Roughened Target Surface for Enhancing Jet Impingement Cooling}, series = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, volume = {1}, booktitle = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031672408}, issn = {2195-4356}, doi = {10.1007/978-3-031-67241-5_64}, pages = {713 -- 720}, year = {2024}, subject = {Numerische Str{\"o}mungssimulation}, language = {en} } @inproceedings{VishwakarmaBhattacharyyaSonietal.2024, author = {Vishwakarma, Devendra Kumar and Bhattacharyya, Suvanjan and Soni, Manoj Kumar and Ghosh, Soumya and Benim, Ali Cemal}, title = {Transition Flow Heat Transfer and Pressure Drop in a Uniformly Heated Inclined Solar Air Heater Fitted with Wavy Tapes}, series = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, volume = {1}, booktitle = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, editor = {Benim, Ali Cemal and Bennacer, Rachid and Mohamad, Abdulmajeed A. and Ocłoń, Paweł and Suh, Sang-Ho and Taler, Jan}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031672408}, issn = {2195-4356}, doi = {10.1007/978-3-031-67241-5_63}, pages = {703 -- 712}, year = {2024}, subject = {Numerische Str{\"o}mungssimulation}, language = {en} } @inproceedings{OPUS4-4850, title = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, series = {Lecture Notes in Mechanical Engineering}, booktitle = {Lecture Notes in Mechanical Engineering}, editor = {Benim, Ali Cemal and Bennacer, Rachid and Mohamad, Abdulmajeed A. and Ocłoń, Paweł and Suh, Sang-Ho and Taler, Jan}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031672408}, issn = {2195-4356}, doi = {10.1007/978-3-031-67241-5}, year = {2024}, subject = {Numerische Str{\"o}mungssimulation}, language = {en} } @inproceedings{KretschmarNiemannDeckertetal.2023, author = {Kretschmar, Dominik and Niemann, J{\"o}rg and Deckert, Carsten and Pisla, Adrian}, title = {Measuring the Impact of Sustainability of Product-Service-Systems}, series = {Smart, Sustainable Manufacturing in an Ever-Changing World: Proceedings of International Conference on Competitive Manufacturing (COMA '22)}, booktitle = {Smart, Sustainable Manufacturing in an Ever-Changing World: Proceedings of International Conference on Competitive Manufacturing (COMA '22)}, editor = {Leipzig, Konrad von and Sacks, Natasha and Mc Clelland, Michelle}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031156014}, issn = {2194-0525}, doi = {10.1007/978-3-031-15602-1_32}, pages = {435 -- 446}, year = {2023}, subject = {Nachhaltigkeit}, language = {en} } @inproceedings{BenimCicek2022, author = {Benim, Ali Cemal and {\c{C}}i{\c{c}}ek, Ayd{\i}n}, title = {Investigation of the Thermohydraulics of an EGS Project in Turkey: Comparative Assessment of Water and CO2 as Heat Transfer Fluid}, series = {Proceedings of CONV-22: Int. Symp. on Convective Heat and Mass Transfer June 5 - 10, 2022, Turkey}, booktitle = {Proceedings of CONV-22: Int. Symp. on Convective Heat and Mass Transfer June 5 - 10, 2022, Turkey}, publisher = {Begellhouse}, doi = {10.1615/ICHMT.2022.CONV22.580}, pages = {439 -- 446}, year = {2022}, subject = {Numerische Str{\"o}mungssimulation}, language = {en} } @inproceedings{SaeedrashedSachdevaSinghetal.2024, author = {Saeedrashed, Younis and Sachdeva, Aryaman and Singh, Srijna and Benim, Ali Cemal}, title = {Numerical Simulation of Cavitation Characteristics on Stepped Spillway Due to Different Geometry Configuration}, series = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, volume = {2}, booktitle = {Advances in Computational Heat and Mass Transfer: Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031666087}, issn = {2195-4356}, doi = {10.1007/978-3-031-66609-4_66}, pages = {715 -- 725}, year = {2024}, subject = {Numerische Str{\"o}mungssimulation}, language = {en} } @inproceedings{RueckertBurhanAhmedetal.2024, author = {R{\"u}ckert, Frank Ulrich and Burhan, Ibrar and Ahmed, Arslan and H{\"u}bner, Dirk and Allweyer, Benjamin and Klinger, Friedrich and Benim, Ali Cemal}, title = {Development of a Passive Cooling System for a Gearless Wind Energy Generator}, series = {Advances in Computational Heat and Mass Transfer Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, volume = {1}, booktitle = {Advances in Computational Heat and Mass Transfer Proceedings of the 14th International Conference on Computational Heat and Mass Transfer (ICCHMT 2023), 4-8 September, 2023, D{\"u}sseldorf, Germany}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031672408}, issn = {2195-4356}, doi = {10.1007/978-3-031-67241-5_30}, pages = {333 -- 343}, year = {2024}, subject = {Numerische Str{\"o}mungssimulation}, language = {en} } @inproceedings{ComeronKassianovSchaeferetal.2015, author = {Comeron, Adolfo and Kassianov, Evgueni I. and Sch{\"a}fer, Klaus and Picard, Richard H. and Weber, Konradin}, title = {Remote Sensing of Clouds and the Atmosphere XX. Remote Sensing of Clouds and the Atmosphere, Toulouse), 23.-24.09.2015}, volume = {Proceedings of SPIE ; volume 9640}, publisher = {SPIE}, address = {Bellingham, Washington, USA}, isbn = {978-1-62841-850-7}, issn = {0277-786X}, year = {2015}, language = {en} } @inproceedings{FischerPohlWeberetal.2012, author = {Fischer, C. and Pohl, T. and Weber, Konradin and Vogel, A. and van Haren, G. and Schweikert, W.}, title = {TATP stand-off detection with open path: FTIR techniques}, series = {Optics and photonics for counterterrorism, crime fighting and defence VIII : 24 - 26 September 2012, Edinburgh, United Kingdom}, volume = {8546}, booktitle = {Optics and photonics for counterterrorism, crime fighting and defence VIII : 24 - 26 September 2012, Edinburgh, United Kingdom}, editor = {Lewis, Colin and Burgess, Douglas}, publisher = {SPIE}, address = {Bellingham, Wash}, isbn = {978-0-8194-9287-6}, issn = {0277-786X}, doi = {10.1117/12.974592}, year = {2012}, language = {en} } @inproceedings{MaasHoefertSchaeferetal.2018, author = {Maas, Peter and H{\"o}fert, Norbert and Sch{\"a}fer, Klaus and Weber, Konradin and Richter, Andreas}, title = {Standards VDI 4211 and VDI 4212 on passive FTIR and DOAS remote sensing techniques}, series = {Proceedings Volume 10786, Remote Sensing of Clouds and the Atmosphere XXIII; 107860W (2018)}, booktitle = {Proceedings Volume 10786, Remote Sensing of Clouds and the Atmosphere XXIII; 107860W (2018)}, editor = {Comer{\´o}n, Adolfo and Kassianov, Evgueni I. and Sch{\"a}fer, Klaus and Picard, Richard H. and Weber, Konradin}, publisher = {SPIE}, doi = {10.1117/12.2325145}, year = {2018}, language = {en} } @inproceedings{ComeronJackKassianovetal.2016, author = {Comeron, Adolfo and Jack, James and Kassianov, Evgueni I. and Sch{\"a}fer, Kiaus and Picard, Richard H and Weber, Konradin}, title = {Remote Sensing of Clouds and the Atmosphere XXI Introduction}, series = {Remote Sensing of Clouds and the Atmosphere XXI : 28-29 September 2016, Edinburgh, United Kingdom}, booktitle = {Remote Sensing of Clouds and the Atmosphere XXI : 28-29 September 2016, Edinburgh, United Kingdom}, publisher = {SPIE}, address = {Bellingham, Washington, USA}, isbn = {978-1-5106-0406-3}, year = {2016}, language = {en} } @inproceedings{HaddadJeongKappeleretal.2024, author = {Haddad, Pascale and Jeong, Haeran and Kappeler, Ron and Altug, Hicran and Andersen, Zorana Jovanovic and Bergmann, Marie and Boogaard, Hanna and Kutlar, Meltem Joss and Lim, Youn Hee and Loft, Steffen and Pohl, Tobias and Hoffmann, Barbara}, title = {Systematic review on health effects of long-term exposure to UFP}, series = {ISEE Conference Abstracts}, volume = {2024}, booktitle = {ISEE Conference Abstracts}, number = {1}, publisher = {Environmental Health Perspectives}, address = {Durham, NC}, issn = {1078-0475}, doi = {10.1289/isee.2024.0574}, year = {2024}, abstract = {BACKGROUND AND AIM [|] Due to their small size, ultrafine particles (UFP≤100nm) can reach deeply into the lungs and could exert higher toxicity on the body organs in comparison with fine particulate matter. Only ten epidemiological studies examined long-term UFP exposure and health effects according to the most recent review from 2019 that included studies until 2017. We systematically reviewed the literature on health effects of long-term exposure to UFP. METHOD [|] Epidemiological studies were searched comprehensively in PubMed and LUDOK (the Swiss literature database on air pollution and health) from January 2017 to September 2023. Original epidemiologic studies were included if they reported on the general or sub-populations, assessed long-term exposure of UFP measures, investigated clinical or preclinical health outcomes and reported a quantifiable measure of association. Internal validity of studies was evaluated with a risk of bias instrument. The project is funded by the Federal Ministry for the Environment, Nature Conversation, Nuclear Safety and Consumer Protection and supervised by the German Environment Agency (FKZ 3721 61 202 0). RESULTS [|] We identified 53 original studies investigating long-term associations. The vast majority were cohort studies (79.2\%) conducted in the general population (62.3\%). Half (54.7\%) were located in western Europe. UFP was measured and modelled in various ways; more than a third of the studies (41.5\%) used land-use regression models. Thirty studies adjusted for at least one co-pollutant. Most identified outcomes were cardiometabolic (43.4\%), respiratory (13.2\%) and birth outcomes (13.2\%). Positive associations with long-term UFP exposure were reported for cardiometabolic, respiratory and birth outcomes for 78.5\%, 42.9\% and 50.0\% of studies, respectively. CONCLUSIONS [|] The evidence base has increased substantially since the publication of the 2019 review. Positive associations were reported, in particular for cardiometabolic outcomes.}, subject = {Exposition (Medizin)}, language = {en} } @inproceedings{NiemannFusseneckerSchloesseretal.2023, author = {Niemann, J{\"o}rg and Fussenecker, Claudia and Schl{\"o}sser, Martin and Kretschmar, Dominik}, title = {A Digital Service Engineering Training Course to Raise Competitiveness in Advanced Service Industries}, series = {Smart, Sustainable Manufacturing in an Ever-Changing World: Proceedings of International Conference on Competitive Manufacturing (COMA '22)}, booktitle = {Smart, Sustainable Manufacturing in an Ever-Changing World: Proceedings of International Conference on Competitive Manufacturing (COMA '22)}, editor = {Leipzig, Konrad von and Sacks, Natasha and Mc Clelland, Michelle}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031156014}, issn = {2194-0525}, doi = {10.1007/978-3-031-15602-1_17}, pages = {217 -- 228}, year = {2023}, subject = {Wettbewerbsvorteil}, language = {en} } @inproceedings{HaileMelekotKrugerNiemann2023, author = {Haile-Melekot, Yafet and Kruger, Karel and Niemann, J{\"o}rg}, title = {Virtual Reality for Interacting with a Manufacturing System Digital Twin—A Case Study}, series = {Smart, Sustainable Manufacturing in an Ever-Changing World: Proceedings of International Conference on Competitive Manufacturing (COMA '22)}, booktitle = {Smart, Sustainable Manufacturing in an Ever-Changing World: Proceedings of International Conference on Competitive Manufacturing (COMA '22)}, editor = {Leipzig, Konrad von and Sacks, Natasha and Mc Clelland, Michelle}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031156014}, issn = {2194-0525}, doi = {10.1007/978-3-031-15602-1_14}, pages = {179 -- 190}, year = {2023}, subject = {Virtuelle Realit{\"a}t}, language = {en} } @inproceedings{OcakciDraghiciNiemann2023, author = {Ocakci, Elif and Draghici, Anca and Niemann, J{\"o}rg}, title = {Resources Collaboration and Optimization in Industry 4.0 Environments}, series = {Smart, Sustainable Manufacturing in an Ever-Changing World: Proceedings of International Conference on Competitive Manufacturing (COMA '22)}, booktitle = {Smart, Sustainable Manufacturing in an Ever-Changing World: Proceedings of International Conference on Competitive Manufacturing (COMA '22)}, editor = {Leipzig, Konrad von and Sacks, Natasha and Mc Clelland, Michelle}, publisher = {Springer Nature}, address = {Cham}, isbn = {9783031156014}, issn = {2194-0525}, doi = {10.1007/978-3-031-15602-1_35}, pages = {483 -- 494}, year = {2023}, subject = {Industrie 4.0}, language = {en} } @inproceedings{SchaeferHarigBlumenstocketal.2010, author = {Sch{\"a}fer, Klaus and Harig, Roland and Blumenstock, Thomas and H{\"o}fert, Norbert and Weber, Konradin}, title = {Development of a VDI guideline for passive FTIR measurements in the atmosphere}, series = {Remote sensing of clouds and the atmosphere XV : 21 - 23 September 2010, Toulouse, France}, volume = {7827}, booktitle = {Remote sensing of clouds and the atmosphere XV : 21 - 23 September 2010, Toulouse, France}, editor = {Picard, Richard H. and Sch{\"a}fer, Klaus and Comeron, Adolfo and van Weele, Michiel}, publisher = {SPIE}, address = {Bellingham, Wash.}, issn = {0277-786X}, doi = {10.1117/12.866466}, year = {2010}, language = {en} } @inproceedings{Weber1992, author = {Weber, Konradin}, title = {Bestimmung von Verfahrenskenngr{\"o}ßen bei Meßverfahren f{\"u}r gasf{\"o}rmige Luftverunreinigungen nach VDI-Richtlinien und DIN/ISO-Normen}, series = {Laser in der Umweltmeßtechnik / Laser in Remote Sensing: Vortr{\"a}ge des 10. Internationalen Kongresses / Proceedings of the 10th International Congress}, booktitle = {Laser in der Umweltmeßtechnik / Laser in Remote Sensing: Vortr{\"a}ge des 10. Internationalen Kongresses / Proceedings of the 10th International Congress}, editor = {Wener, Christian and Klein, Volker and Weber, Konradin}, publisher = {Springer Nature}, address = {Berlin, Heidelberg}, isbn = {9783540552482}, doi = {10.1007/978-3-642-50980-3_20}, pages = {131 -- 140}, year = {1992}, subject = {Lasermesstechnik}, language = {de} }