@article{WolterZekornNeef2016, author = {Wolter, Nina and Zekorn, Thomas and Neef, Matthias}, title = {Station{\"a}re thermodynamische Prozesssimulationen am Beispiel eines Industriekraftwerks}, series = {BWK: das Energie-Fachmagazin}, volume = {68}, journal = {BWK: das Energie-Fachmagazin}, number = {6}, pages = {6 -- 10}, year = {2016}, abstract = {Um bauliche Ver{\"a}nderungen in bestehenden Kraftwerksprozessen auf ihre Wirkungsweise untersuchen und thermodynamisch beziehungsweise wirtschaftlich bewerten zu k{\"o}nnen, werden thermische Kraftwerksprozesse mit geeigneter Simulationssoftware abgebildet und in verschiedenen Detaillierungsstufen ausgelegt oder nachgerechnet. Im Folgenden wird ein Weg aufgezeigt, wie mit Hilfe einer station{\"a}ren Simulationssoftware die Gesamtjahresbilanz eines Kraftwerks vorausberechnet werden kann. Mit Hilfe von Prozessdaten aus Vorjahren wird nachgewiesen, dass das Berechnungsmodell das bestehende Kraftwerk mit einer Abweichung von weniger als drei Prozent bez{\"u}glich erzeugter elektrischer Leistung und Brennstoffeinsatz und bei bekannter Dampfproduktion abbilden kann. Das so verifizierte Modell kann zur Untersuchung von Zubaumaßnahmen oder Ver{\"a}nderungen im Kraftwerksprozess eingesetzt werden.}, language = {de} } @article{RoedderFrankKirschneretal.2018, author = {R{\"o}dder, Maximilian and Frank, Lena and Kirschner, Daniel and Neef, Matthias and Adam, Mario}, title = {EnergiBUS4home - Sustainable energy resourcing in low-energy buildings}, series = {Energy}, volume = {159}, journal = {Energy}, publisher = {Elsevier}, doi = {10.1016/j.energy.2018.06.145}, pages = {638 -- 647}, year = {2018}, language = {en} } @article{BiedermannChongKameieretal.2017, author = {Biedermann, Till M. and Chong, Tze Pei and Kameier, Frank and Paschereit, Christian O.}, title = {Statistical-Empirical Modeling of Airfoil Noise Subjected to Leading-Edge Serrations}, series = {AIAA Journal}, volume = {55}, journal = {AIAA Journal}, number = {9}, publisher = {ARC}, doi = {10.2514/1.j055633}, pages = {3128 -- 3142}, year = {2017}, language = {en} } @article{WestkaemperNiemannStierle2004, author = {Westk{\"a}mper, Engelbert and Niemann, J{\"o}rg and Stierle, Thomas}, title = {Systemorientierte Produktionsstrukturen f{\"u}r den Werkzeugmaschinenbau}, series = {zwf - Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, volume = {99}, journal = {zwf - Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, number = {9}, publisher = {Hanser}, issn = {0947-0085}, doi = {10.3139/104.100805}, pages = {461 -- 464}, year = {2004}, language = {de} } @article{NiemannWestkaemper2003, author = {Niemann, J{\"o}rg and Westk{\"a}mper, Engelbert}, title = {Lebenslaufumfassende Wirtschaftlichkeitsbetrachtungen}, series = {zwf - Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, volume = {98}, journal = {zwf - Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, number = {1-2}, publisher = {Hanser}, issn = {0947-0085}, doi = {10.3139/104.100611}, pages = {50 -- 53}, year = {2003}, language = {de} } @article{WestkaemperNiemannStolz2002, author = {Westk{\"a}mper, Engelbert and Niemann, J{\"o}rg and Stolz, M.}, title = {Digital information—potentials for TeleX applications}, series = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, volume = {216}, journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, number = {5}, publisher = {sage journals}, organization = {sage journals}, issn = {2041-2975}, doi = {10.1243/0954405021520319}, pages = {801 -- 808}, year = {2002}, language = {en} } @article{WestkaemperNiemannDauensteiner2001, author = {Westk{\"a}mper, Engelbert and Niemann, J{\"o}rg and Dauensteiner, A.}, title = {Economic and ecological aspects in product life cycle evaluation}, series = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, volume = {215}, journal = {Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture}, number = {5}, publisher = {sage journals}, issn = {2041-2975}, doi = {10.1243/0954405011518601}, pages = {673 -- 681}, year = {2001}, language = {en} } @article{FallingKaluzaStrucks2021, author = {Falling, Luisa and Kaluza, Stefan and Strucks, Peter}, title = {A Short Review on Ni-Catalyzed Methanation of CO²: Reaction Mechanism, Catalyst Deactivation, Dynamic Operation}, series = {Chemie Ingenieur Technik}, volume = {93}, journal = {Chemie Ingenieur Technik}, publisher = {Wiley}, issn = {1522-2640}, doi = {10.1002/cite.202100049}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-32134}, pages = {1526 -- 1536}, year = {2021}, abstract = {Today, the use of renewable energies and recycling of climate-changing gases are increasingly important. In this context,coupling of methanation with small, decentralized CO2sources such as biogas plants provides one possibility. However,fluctuating availability of renewables for hydrogen production in combination with small storage volumes result in anenhanced demand for dynamic process operation. This leads to new research challenges with respect to the required cata-lysts and the overall process design. To draw reliable conclusions about the catalytic performance under dynamic processoperation, the mechanism of the methanation reaction as well as typical deactivation procedures of the catalyst appliedunder steady-state conditions have to be reviewed thoroughly.}, language = {en} } @article{RankRuessKollmannsbergeretal.2012, author = {Rank, Ernst and Ruess, Martin and Kollmannsberger, Stefan and Schillinger, Dominik and D{\"u}ster, Alexander}, title = {Geometric modeling, isogeometric analysis and the finite cell method}, series = {Computer Methods in Applied Mechanics and Engineering}, volume = {249-252}, journal = {Computer Methods in Applied Mechanics and Engineering}, publisher = {Elsevier}, issn = {0045-7825}, doi = {10.1016/j.cma.2012.05.022}, pages = {104 -- 115}, year = {2012}, language = {de} } @article{RuessTalTrabelsietal.2012, author = {Ruess, Martin and Tal, David and Trabelsi, Nir and Yosibash, Zohar and Rank, Ernst}, title = {The finite cell method for bone simulations: verification and validation}, series = {Biomechanics and modeling in mechanobiology}, volume = {11}, journal = {Biomechanics and modeling in mechanobiology}, number = {3-4}, publisher = {Springer}, organization = {Springer}, issn = {1617-7940}, doi = {10.1007/s10237-011-0322-2}, pages = {425 -- 437}, year = {2012}, language = {en} } @article{SchillingerRuessZanderetal.2012, author = {Schillinger, Dominik and Ruess, Martin and Zander, Nils and Bazilevs, Yuri and D{\"u}ster, Alexander and Rank, Ernst}, title = {Small and large deformation analysis with the p- and B-spline versions of the Finite Cell Method}, series = {Computational Mechanics}, volume = {50}, journal = {Computational Mechanics}, number = {4}, publisher = {Springer}, issn = {1432-0924}, doi = {10.1007/S00466-012-0684-Z}, pages = {445 -- 478}, year = {2012}, language = {en} } @article{YangRuessKollmannsbergeretal.2012, author = {Yang, Z. and Ruess, Martin and Kollmannsberger, Stefan and D{\"u}ster, Alexander and Rank, Ernst}, title = {An efficient integration technique for the voxel-based finite cell method}, series = {International Journal for Numerical Methods in Engineering}, volume = {91}, journal = {International Journal for Numerical Methods in Engineering}, number = {5}, publisher = {Wiley}, issn = {1097-0207}, doi = {10.1002/nme.4269}, pages = {457 -- 471}, year = {2012}, language = {en} } @article{ZanderKollmannsbergerRuessetal.2012, author = {Zander, Nils and Kollmannsberger, Stefan and Ruess, Martin and Yosibash, Z. and Rank, Ernst}, title = {The Finite Cell Method for linear thermoelasticity}, series = {Computers \& Mathematics with Applications}, volume = {64}, journal = {Computers \& Mathematics with Applications}, number = {11}, publisher = {Elsevier}, issn = {0898-1221}, doi = {10.1016/j.camwa.2012.09.002}, pages = {3527 -- 3541}, year = {2012}, language = {en} } @article{YangKollmannsbergerDuesteretal.2011, author = {Yang, Zhengxiong and Kollmannsberger, Stefan and D{\"u}ster, Alexander and Ruess, Martin and Garcia, Eduardo Grande and Burgkart, Rainer and Rank, Ernst}, title = {Non-standard bone simulation: interactive numerical analysis by computational steering}, series = {Computing and Visualization in Science}, volume = {14}, journal = {Computing and Visualization in Science}, number = {5}, publisher = {Springer}, doi = {10.1007/s00791-012-0175-y}, pages = {207 -- 216}, year = {2011}, language = {en} } @article{RuessPahl2009, author = {Ruess, Martin and Pahl, P. J.}, title = {An extended QR-solver for large profiled matrices}, series = {International Journal for Numerical Methods in Engineering}, volume = {79}, journal = {International Journal for Numerical Methods in Engineering}, number = {11}, publisher = {Wiley}, issn = {1097-0207}, doi = {10.1002/nme.2618}, pages = {1419 -- 1442}, year = {2009}, language = {en} } @article{LiangRuess2016, author = {Liang, Ke and Ruess, Martin}, title = {Nonlinear buckling analysis of the conical and cylindrical shells using the SGL strain based reduced order model and the PHC method}, series = {Aerospace Science and Technology}, volume = {55}, journal = {Aerospace Science and Technology}, publisher = {Elsevier}, issn = {1270-9638}, doi = {10.1016/j.ast.2016.05.018}, pages = {103 -- 110}, year = {2016}, language = {en} } @article{LiangRuessAbdalla2016, author = {Liang, Ke and Ruess, Martin and Abdalla, Mostafa}, title = {An eigenanalysis-based bifurcation indicator proposed in the framework of a reduced-order modeling technique for non-linear structural analysis}, series = {International Journal of Non-Linear Mechanics}, volume = {81}, journal = {International Journal of Non-Linear Mechanics}, publisher = {Elsevier}, issn = {0020-7462}, doi = {10.1016/j.ijnonlinmec.2016.01.013}, pages = {129 -- 138}, year = {2016}, language = {en} } @article{LiangRuessAbdalla2016, author = {Liang, Ke and Ruess, Martin and Abdalla, Mostafa}, title = {Co-rotational finite element formulation used in the Koiter-Newton method for nonlinear buckling analyses}, series = {Finite Elements in Analysis and Design}, volume = {116}, journal = {Finite Elements in Analysis and Design}, publisher = {Elsevier}, issn = {0168-874X}, doi = {10.1016/j.finel.2016.03.006}, pages = {38 -- 54}, year = {2016}, language = {en} } @article{VarduhnHsuRuessetal.2016, author = {Varduhn, Vasco and Hsu, Ming-Chen and Ruess, Martin and Schillinger, Dominik}, title = {The tetrahedral finite cell method: Higher-order immersogeometric analysis on adaptive non-boundary-fitted meshes}, series = {International Journal for Numerical Methods in Engineering}, volume = {107}, journal = {International Journal for Numerical Methods in Engineering}, number = {12}, publisher = {Wiley}, issn = {1097-0207}, doi = {10.1002/nme.5207}, pages = {1054 -- 1079}, year = {2016}, language = {en} } @article{WilleRuessRanketal.2016, author = {Wille, Hagen and Ruess, Martin and Rank, Ernst and Yosibash, Zohar}, title = {Uncertainty quantification for personalized analyses of human proximal femurs}, series = {Journal of Biomechanics}, volume = {49}, journal = {Journal of Biomechanics}, number = {4}, publisher = {Elsevier}, issn = {0021-9290}, doi = {10.1016/j.jbiomech.2015.11.013}, pages = {520 -- 527}, year = {2016}, abstract = {Computational models for the personalized analysis of human femurs contain uncertainties in bone material properties and loads, which affect the simulation results. To quantify the influence we developed a probabilistic framework based on polynomial chaos (PC) that propagates stochastic input variables through any computational model. We considered a stochastic E-ρ relationship and a stochastic hip contact force, representing realistic variability of experimental data. Their influence on the prediction of principal strains (ϵ1 and ϵ3) was quantified for one human proximal femur, including sensitivity and reliability analysis. Large variabilities in the principal strain predictions were found in the cortical shell of the femoral neck, with coefficients of variation of ≈40\%. Between 60 and 80\% of the variance in ϵ1 and ϵ3 are attributable to the uncertainty in the E-ρ relationship, while ≈10\% are caused by the load magnitude and 5-30\% by the load direction. Principal strain directions were unaffected by material and loading uncertainties. The antero-superior and medial inferior sides of the neck exhibited the largest probabilities for tensile and compression failure, however all were very small (pf<0.001). In summary, uncertainty quantification with PC has been demonstrated to efficiently and accurately describe the influence of very different stochastic inputs, which increases the credibility and explanatory power of personalized analyses of human proximal femurs.}, language = {en} } @article{FriedrichLoosenLiangetal.2015, author = {Friedrich, Linus and Loosen, Simon and Liang, Ke and Ruess, Martin and Bisagni, Chiara and Schr{\"o}der, Kai-Uwe}, title = {Stacking sequence influence on imperfection sensitivity of cylindrical composite shells under axial compression}, series = {Composite Structures}, volume = {134}, journal = {Composite Structures}, publisher = {Elsevier}, issn = {0263-8223}, doi = {10.1016/j.compstruct.2015.08.132}, pages = {750 -- 761}, year = {2015}, language = {en} } @article{GuoRuess2015, author = {Guo, Yujie and Ruess, Martin}, title = {A layerwise isogeometric approach for NURBS-derived laminate composite shells}, series = {Composite Structures}, volume = {124}, journal = {Composite Structures}, publisher = {Elsevier}, issn = {0263-8223}, doi = {10.1016/j.compstruct.2015.01.012}, pages = {300 -- 309}, year = {2015}, language = {en} } @article{ElhaddadZanderBogetal.2018, author = {Elhaddad, Mohamed and Zander, Nils and Bog, Tino and Kudela, L{\´a}szl{\´o} and Kollmannsberger, Stefan and Kirschke, Jan and Baum, Thomas and Ruess, Martin and Rank, Ernst}, title = {Multi-level hp-finite cell method for embedded interface problems with application in biomechanics}, series = {International Journal for Numerical Methods in Biomedical Engineering}, volume = {34}, journal = {International Journal for Numerical Methods in Biomedical Engineering}, number = {4}, publisher = {Wiley}, issn = {2040-7947}, doi = {10.1002/cnm.2951}, year = {2018}, abstract = {This work presents a numerical discretization technique for solving 3-dimensional material interface problems involving complex geometry without conforming mesh generation. The finite cell method (FCM), which is a high-order fictitious domain approach, is used for the numerical approximation of the solution without a boundary-conforming mesh. Weak discontinuities at material interfaces are resolved by using separate FCM meshes for each material sub-domain and weakly enforcing the interface conditions between the different meshes. Additionally, a recently developed hierarchical hp-refinement scheme is used to locally refine the FCM meshes to resolve singularities and local solution features at the interfaces. Thereby, higher convergence rates are achievable for nonsmooth problems. A series of numerical experiments with 2- and 3-dimensional benchmark problems is presented, showing that the proposed hp-refinement scheme in conjunction with the weak enforcement of the interface conditions leads to a significant improvement of the convergence rates, even in the presence of singularities. Finally, the proposed technique is applied to simulate a vertebra-implant model. The application showcases the method's potential as an accurate simulation tool for biomechanical problems involving complex geometry, and it demonstrates its flexibility in dealing with different types of geometric description.}, language = {en} } @article{KeshavanarayanaRuessdeBorst2018, author = {Keshavanarayana, Pradeep and Ruess, Martin and de Borst, Ren{\´e}}, title = {On the monolithic and staggered solution of cell contractility and focal adhesion growth}, series = {International Journal for Numerical Methods in Biomedical Engineering}, volume = {34}, journal = {International Journal for Numerical Methods in Biomedical Engineering}, number = {11}, publisher = {Wiley}, issn = {2040-7947}, doi = {10.1002/cnm.3138}, year = {2018}, language = {en} } @article{MagisanoLiangGarceaetal.2018, author = {Magisano, D. and Liang, Ke and Garcea, G. and Leonetti, L. and Ruess, Martin}, title = {An efficient mixed variational reduced-order model formulation for nonlinear analyses of elastic shells}, series = {International Journal for Numerical Methods in Engineering}, volume = {113}, journal = {International Journal for Numerical Methods in Engineering}, number = {4}, publisher = {Wiley}, issn = {1097-0207}, doi = {10.1002/nme.5629}, pages = {634 -- 655}, year = {2018}, language = {en} } @article{NguyenStoterRuessetal.2018, author = {Nguyen, Lam H. and Stoter, Stein K.F. and Ruess, Martin and Sanchez Uribe, Manuel A. and Schillinger, Dominik}, title = {The diffuse Nitsche method: Dirichlet constraints on phase-field boundaries}, series = {International Journal for Numerical Methods in Engineering}, volume = {113}, journal = {International Journal for Numerical Methods in Engineering}, number = {4}, publisher = {Wiley}, issn = {1097-0207}, doi = {10.1002/nme.5628}, pages = {601 -- 633}, year = {2018}, language = {en} } @article{GroenLangelaarSigmundetal.2017, author = {Groen, Jeroen P. and Langelaar, Matthijs and Sigmund, Ole and Ruess, Martin}, title = {Higher-order multi-resolution topology optimization using the finite cell method}, series = {International Journal for Numerical Methods in Engineering}, volume = {110}, journal = {International Journal for Numerical Methods in Engineering}, number = {10}, publisher = {Wiley}, issn = {1097-0207}, doi = {10.1002/nme.5432}, pages = {903 -- 920}, year = {2017}, language = {en} } @article{GuoRuessSchillinger2017, author = {Guo, Yujie and Ruess, Martin and Schillinger, Dominik}, title = {A parameter-free variational coupling approach for trimmed isogeometric thin shells}, series = {Computational Mechanics}, volume = {59}, journal = {Computational Mechanics}, number = {4}, publisher = {Springer}, issn = {1432-0924}, doi = {10.1007/s00466-016-1368-x}, pages = {693 -- 715}, year = {2017}, language = {en} } @article{KeshavanarayanaRuessdeBorst2017, author = {Keshavanarayana, Pradeep and Ruess, Martin and de Borst, Ren{\´e}}, title = {A feedback-loop extended stress fiber growth model with focal adhesion formation}, series = {International Journal of Solids and Structures}, volume = {128}, journal = {International Journal of Solids and Structures}, publisher = {Elsevier}, issn = {0020-7683}, doi = {10.1016/j.ijsolstr.2017.08.023}, pages = {160 -- 173}, year = {2017}, language = {en} } @article{NguyenStoterBaumetal.2017, author = {Nguyen, Lam H. and Stoter, Stein K.F. and Baum, Thomas and Kirschke, Jan and Ruess, Martin and Yosibash, Zohar and Schillinger, Dominik}, title = {Phase-field boundary conditions for the voxel finite cell method: Surface-free stress analysis of CT-based bone structures}, series = {International Journal for Numerical Methods in Biomedical Engineering}, volume = {33}, journal = {International Journal for Numerical Methods in Biomedical Engineering}, number = {12}, publisher = {Wiley}, issn = {2040-7947}, doi = {10.1002/cnm.2880}, year = {2017}, language = {en} } @article{ZanderRuessBogetal.2017, author = {Zander, Nils and Ruess, Martin and Bog, Tino and Kollmannsberger, Stefan and Rank, Ernst}, title = {Multi-level hp -adaptivity for cohesive fracture modeling}, series = {International Journal for Numerical Methods in Engineering}, volume = {109}, journal = {International Journal for Numerical Methods in Engineering}, number = {13}, publisher = {Wiley}, issn = {1097-0207}, doi = {10.1002/nme.5340}, pages = {1723 -- 1755}, year = {2017}, language = {en} } @article{GuoRuess2015, author = {Guo, Yujie and Ruess, Martin}, title = {Nitsche's method for a coupling of isogeometric thin shells and blended shell structures}, series = {Computer Methods in Applied Mechanics and Engineering}, volume = {284}, journal = {Computer Methods in Applied Mechanics and Engineering}, publisher = {Elsevier}, issn = {0045-7825}, doi = {10.1016/j.cma.2014.11.014}, pages = {881 -- 905}, year = {2015}, language = {en} } @article{GuoRuess2015, author = {Guo, Yujie and Ruess, Martin}, title = {Weak Dirichlet boundary conditions for trimmed thin isogeometric shells}, series = {Computers \& Mathematics with Applications}, volume = {70}, journal = {Computers \& Mathematics with Applications}, number = {7}, publisher = {Elsevier}, issn = {0898-1221}, doi = {10.1016/j.camwa.2015.06.012}, pages = {1425 -- 1440}, year = {2015}, language = {de} } @article{KollmannsbergerOezcanBaigesetal.2015, author = {Kollmannsberger, Stefan and {\"O}zcan, Ali I. and Baiges, J. and Ruess, Martin and Rank, Ernst and Reali, A.}, title = {Parameter-free, weak imposition of Dirichlet boundary conditions and coupling of trimmed and non-conforming patches}, series = {International Journal for Numerical Methods in Engineering}, volume = {101}, journal = {International Journal for Numerical Methods in Engineering}, number = {9}, publisher = {Wiley}, issn = {1097-0207}, doi = {10.1002/nme.4817}, pages = {670 -- 699}, year = {2015}, language = {en} } @article{LiangZhangSunetal.2015, author = {Liang, Ke and Zhang, YongJie and Sun, Qin and Ruess, Martin}, title = {A new robust design for imperfection sensitive stiffened cylinders used in aerospace engineering}, series = {Science China Technological Sciences}, volume = {58}, journal = {Science China Technological Sciences}, number = {5}, publisher = {Springer}, issn = {1869-1900}, doi = {10.1007/s11431-015-5793-4}, pages = {796 -- 802}, year = {2015}, language = {en} } @article{SchillingerRuess2015, author = {Schillinger, Dominik and Ruess, Martin}, title = {The Finite Cell Method: A Review in the Context of Higher-Order Structural Analysis of CAD and Image-Based Geometric Models}, series = {Archives of Computational Methods in Engineering}, volume = {22}, journal = {Archives of Computational Methods in Engineering}, number = {3}, publisher = {Springer}, issn = {1886-1784}, doi = {10.1007/s11831-014-9115-y}, pages = {391 -- 455}, year = {2015}, language = {en} } @article{GuoRuessGuerdal2014, author = {Guo, Yujie and Ruess, Martin and G{\"u}rdal, Zafer}, title = {A contact extended isogeometric layerwise approach for the buckling analysis of delaminated composites}, series = {Composite Structures}, volume = {116}, journal = {Composite Structures}, publisher = {Elsevier}, issn = {0263-8223}, doi = {10.1016/j.compstruct.2014.05.006}, pages = {55 -- 66}, year = {2014}, language = {de} } @article{LiangRuessAbdalla2014, author = {Liang, Ke and Ruess, Martin and Abdalla, Mostafa}, title = {The Koiter-Newton approach using von K{\´a}rm{\´a}n kinematics for buckling analyses of imperfection sensitive structures}, series = {Computer Methods in Applied Mechanics and Engineering}, volume = {279}, journal = {Computer Methods in Applied Mechanics and Engineering}, publisher = {Elsevier}, issn = {0045-7825}, doi = {10.1016/j.cma.2014.07.008}, pages = {440 -- 468}, year = {2014}, language = {en} } @article{RuessSchillingerOezcanetal.2014, author = {Ruess, Martin and Schillinger, Dominik and {\"O}zcan, Ali I. and Rank, Ernst}, title = {Weak coupling for isogeometric analysis of non-matching and trimmed multi-patch geometries}, series = {Computer Methods in Applied Mechanics and Engineering}, volume = {269}, journal = {Computer Methods in Applied Mechanics and Engineering}, publisher = {Elsevier}, issn = {0045-7825}, doi = {10.1016/j.cma.2013.10.009}, pages = {46 -- 71}, year = {2014}, language = {en} } @article{ZanderBogElhaddadetal.2014, author = {Zander, Nils and Bog, Tino and Elhaddad, Mohamed and Espinoza, R. and Hu, H. and Joly, A. and Wu, C. and Zerbe, P. and D{\"u}ster, Alexander and Kollmannsberger, Stefan and Parvizian, J. and Ruess, Martin and Schillinger, Dominik and Rank, Ernst}, title = {FCMLab: A finite cell research toolbox for MATLAB}, series = {Advances in Engineering Software}, volume = {74}, journal = {Advances in Engineering Software}, publisher = {Elsevier}, issn = {0965-9978}, doi = {10.1016/j.advengsoft.2014.04.004}, pages = {49 -- 63}, year = {2014}, language = {en} } @article{RuessSchillingerBazilevsetal.2013, author = {Ruess, Martin and Schillinger, Dominik and Bazilevs, Yuri and Varduhn, Vasco and Rank, Ernst}, title = {Weakly enforced essential boundary conditions for NURBS-embedded and trimmed NURBS geometries on the basis of the finite cell method}, series = {International Journal for Numerical Methods in Engineering}, volume = {95}, journal = {International Journal for Numerical Methods in Engineering}, number = {10}, publisher = {Wiley}, issn = {1097-0207}, doi = {10.1002/nme.4522}, pages = {811 -- 846}, year = {2013}, language = {en} } @article{DeckertMohya2020, author = {Deckert, Carsten and Mohya, Ahmed}, title = {Kreativit{\"a}tstechniken f{\"u}r angehende Ingenieurinnen und Ingenieure}, series = {Innovations-Forum}, volume = {18}, journal = {Innovations-Forum}, number = {1}, publisher = {InnoFo}, pages = {42 -- 46}, year = {2020}, abstract = {In Zeiten fortschreitender Digitalisierung und zunehmender Transparenz auf den M{\"a}rkten m{\"u}ssen sich Unternehmen mit zunehmenden Ver{\"a}nderungen, z. B. durch Prozess- und Produktinnovationen, auseinandersetzen. Es ist daher unerl{\"a}sslich, dass sich angehende Ingenieurinnen und Ingenieure mit dem Prozess der Ideenfindung und der damit verbundenen Innovationsbereitschaft auseinandersetzen. Kreativit{\"a}t spielt eine entscheidende Rolle im Prozess der Ideengenerierung und Probleml{\"o}sung. Hochschulen, die Ingenieurstudieng{\"a}nge anbieten, sind daher gefordert, die entsprechenden F{\"a}higkeiten zu vermitteln. Durch den gezielten Einsatz von Kreativit{\"a}tstechniken kann die Kreativit{\"a}t gef{\"o}rdert werden. Der vorliegende Beitrag befasst sich mit der Bewertung unterschiedlicher Kreativit{\"a}tstechniken und geht der Frage nach, welche Kreativit{\"a}tstechniken sich eignen, den angehenden Ingenieurinnen und Ingenieuren beim kreativen Probleml{\"o}sen zu unterst{\"u}tzen.}, subject = {Kreativit{\"a}t}, language = {de} } @article{DeckertKalefeldKutz2020, author = {Deckert, Carsten and Kalefeld, Jannik and Kutz, Martin}, title = {Gesch{\"a}ftsmodelle f{\"u}r das Internet der Dinge: Welche Gesch{\"a}ftsmodellinnovation passt zum Unternehmen?}, series = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, volume = {115}, journal = {ZWF Zeitschrift f{\"u}r wirtschaftlichen Fabrikbetrieb}, number = {12}, publisher = {Hanser}, issn = {0947-0085}, doi = {10.3139/104.112265}, pages = {928 -- 933}, year = {2020}, language = {de} } @article{BhattacharyyaChattopadhyayGuinetal.2019, author = {Bhattacharyya, Suvanjan and Chattopadhyay, Himadri and Guin, Anindya and Benim, Ali Cemal}, title = {Investigation of Inclined Turbulators for Heat Transfer Enhancement in a Solar Air Heater}, series = {Heat Transfer Engineering}, volume = {40}, journal = {Heat Transfer Engineering}, number = {17/18}, publisher = {Taylor \& Francis}, doi = {10.1080/01457632.2018.1474593}, pages = {1451 -- 1460}, year = {2019}, language = {en} } @article{DeckertSchomaker2019, author = {Deckert, Carsten and Schomaker, Rahel M.}, title = {Cultural Impacts on National Innovativeness: Not Every Cultural Dimension Is Equal}, series = {Cross-Cultural Research}, volume = {53}, journal = {Cross-Cultural Research}, number = {2}, publisher = {sage journals}, doi = {10.1177/1069397118799700}, pages = {186 -- 214}, year = {2019}, language = {en} } @article{BenimCicekEker2018, author = {Benim, Ali Cemal and {\c{C}}i{\c{c}}ek, Ayd{\i}n and Eker, Arif Mert}, title = {A Computational Investigation of the Thermohydraulics of an EGS Project}, series = {Journal of Thermal Science}, volume = {27}, journal = {Journal of Thermal Science}, number = {5}, publisher = {Springer}, issn = {1003-2169}, doi = {10.1007/s11630-018-1033-0}, pages = {405 -- 412}, year = {2018}, language = {en} } @article{BenimDiederichPfeiffelmann2018, author = {Benim, Ali Cemal and Diederich, Michael and Pfeiffelmann, Bj{\"o}rn}, title = {Aerodynamic Optimization of Airfoil Profiles for Small Horizontal Axis Wind Turbines}, series = {Computation}, volume = {6}, journal = {Computation}, number = {2}, publisher = {MDPI}, issn = {2079-3197}, doi = {10.3390/computation6020034}, url = {http://nbn-resolving.de/urn:nbn:de:hbz:due62-opus-25143}, year = {2018}, language = {en} } @article{GuoZouRuess2021, author = {Guo, Yujie and Zou, Zhihui and Ruess, Martin}, title = {Isogeometric multi-patch analyses for mixed thin shells in the framework of non-linear elasticity}, series = {Computer Methods in Applied Mechanics and Engineering}, volume = {380}, journal = {Computer Methods in Applied Mechanics and Engineering}, publisher = {Elsevier}, issn = {0045-7825}, doi = {10.1016/j.cma.2021.113771}, pages = {49 -- 52}, year = {2021}, language = {en} } @article{AntonNebelSongetal.2015, author = {Anton, Johan and Nebel, Janine and Song, Huiqing and Froese, Christian and Weide, Philipp and Ruland, Holger and Muhler, Martin and Kaluza, Stefan}, title = {Structure-activity relationships of Co-modified Cu/ZnO/Al2O3 catalysts applied in the synthesis of higher alcohols from synthesis gas}, series = {Applied Catalysis A: General}, volume = {505}, journal = {Applied Catalysis A: General}, publisher = {Elsevier}, issn = {0926-860X}, doi = {10.1016/j.apcata.2015.07.002}, pages = {326 -- 333}, year = {2015}, language = {en} } @article{AntonNebelGoebeletal.2016, author = {Anton, Johan and Nebel, Janine and G{\"o}bel, Christoph and Gabrysch, Thomas and Song, Huiqing and Froese, Christian and Ruland, Holger and Muhler, Martin and Kaluza, Stefan}, title = {CO Hydrogenation to Higher Alcohols over Cu-Co-Based Catalysts Derived from Hydrotalcite-Type Precursors}, series = {Topics in Catalysis}, volume = {59}, journal = {Topics in Catalysis}, number = {15-16}, publisher = {Springer Nature}, doi = {10.1007/s11244-016-0663-2}, pages = {1361 -- 1370}, year = {2016}, language = {en} }