TY - JOUR A1 - Unseld, Simon A1 - Goller, Ralf A1 - Koch, Dietmar T1 - Principles and Approaches for the Machining Simulation of Ceramic Matrix Composites at Microscale: A Review and Outlook JF - Open Ceramics KW - machining simulation KW - ceramic matrix composite KW - brittle material model KW - microscale KW - cohesive zone model Y1 - 2023 U6 - https://doi.org/10.1016/j.oceram.2023.100454 SN - 2666-5395 VL - 16 IS - 2023,16 ER - TY - JOUR A1 - Rösiger, Achim A1 - Kleiner, Stefan A1 - Unseld, Simon A1 - Goller, Ralf A1 - Zoli, Luca A1 - Sciti, Diletta T1 - Influence of Diamond Grinding Process on Material Removal Mechanisms and Surface Roughness of 0/90° Continuous Carbon Fiber Reinforced ZrB2 JF - Open Ceramics KW - ZrB2 KW - grinding KW - machining KW - material removal mechanism KW - UHTCMC KW - surface roughness Y1 - 2024 U6 - https://doi.org/10.1016/j.oceram.2024.100669 SN - 2666-5395 VL - 20 IS - 2024,December ER - TY - JOUR A1 - León-Pérez, Patricia A1 - Opel, Thorsten A1 - Puchas, Georg A1 - Langhof, Nico A1 - Goller, Ralf A1 - Schafföner, Stefan A1 - Koch, Dietmar T1 - Effect of the Fibre Volume Content on the Machinability and Surface Integrity in Grinding C/C-SiC Composites JF - Journal of the European Ceramic Society KW - C/C-SiC KW - fibre volume content KW - grinding force KW - surface roughness KW - flexural strength Y1 - 2024 U6 - https://doi.org/10.1016/j.jeurceramsoc.2024.117173 SN - 1873-619X VL - 45 IS - 2025,6 ER - TY - JOUR A1 - Rösiger, Achim A1 - Schukraft, Joél A1 - Goller, Ralf A1 - Weidenmann, Kay A. T1 - Investigation of the Mechanical Machinability of an Interpenetrating Metal-ceramic Composite Using Diamond Grinding JF - The international journal of advanced manufacturing technology KW - interpenetrating metal-ceramic composites (IMCC) KW - mechanical machinability KW - grinding KW - cutting forces KW - surface roughness KW - material removal behavior Y1 - U6 - https://doi.org/10.1007/s00170-025-15130-9 SN - 1433-3015 ER - TY - JOUR A1 - Goller, Ralf A1 - León-Pérez, Patricia A1 - Rösiger, Achim A1 - Spornraft, Bernhard T1 - Coole Bearbeitung: Einfluss des Kühlschmiersystems beim Fräsen keramischer Faserverbundwerkstoffe (CMCs) JF - CU reports: Internationales Mitgliedermagazin des Composites United Y1 - 2020 UR - https://www.carbon-connected.de/Group/CU.reports/Dokumente/File/Embedded/89F7A75D7F8C0D42A49CB5D41A3119D8 SN - 2699-4534 IS - 2020,1 SP - 38 EP - 39 ER - TY - JOUR A1 - Rösiger, Achim A1 - Goller, Ralf T1 - Damage Evaluation of CMCs after Drilling with Geometrically Defined Cutting Edges JF - Materials Science Forum KW - CMC KW - drilling KW - defined cutting edge Y1 - 2015 SN - 978-3-03835-515-1 U6 - https://doi.org/10.4028/www.scientific.net/MSF.825-826.271 SN - 1662-9752 N1 - Beitrag: 20th Symposium on Composites, Wien, Österreich, 01.07.2015 - 03.07.2015 VL - 825-826 SP - 271 EP - 278 ER - TY - JOUR A1 - Schlaich, Mike A1 - Zwingmann, Bernd A1 - Liu, Yue A1 - Goller, Ralf T1 - Zugelemente aus CFK und ihre Verankerungen JF - Bautechnik T2 - CFRP Tension Elements and Their Anchorages KW - Zugelement KW - Seil KW - Faserverbundkunststoff KW - CFK KW - Verankerung Y1 - 2012 U6 - https://doi.org/10.1002/bate.201200057 SN - 0932-8351 SN - 1437-0999 VL - 89 IS - 2012,12 SP - 841 EP - 850 ER - TY - JOUR A1 - Goller, Ralf A1 - Rösiger, Achim A1 - Azzaz, Yäsin Ahmed Mohamed T1 - Evaluation of Ceramic Matrix Composite Edge and Surface Damage JF - Key Engineering Materials KW - ceramic matrix composites KW - machining KW - damage KW - grinding KW - milling KW - gas turbine Y1 - 2019 U6 - https://doi.org/10.4028/www.scientific.net/KEM.809.161 SN - 1662-9795 N1 - Beitrag: 22nd Symposium on Composites, Kaiserslautern, Deutschland, 26.06.2019 - 28.06.2019 VL - 809 SP - 161 EP - 166 PB - Trans Tech Publications ER - TY - JOUR A1 - Rösiger, Achim A1 - Goller, Ralf A1 - Langhof, Nico A1 - Krenkel, Walter T1 - Influence of In-Plane and Out-of-Plane Machining on the Surface Topography, the Removal Mechanism and the Flexural Strength of 2D C/C-SiC Composites JF - Journal of the European Ceramic Society KW - C/C-SiC KW - material removal mechanisms KW - flexural strength KW - grinding KW - milling Y1 - 2020 U6 - https://doi.org/10.1016/j.jeurceramsoc.2020.10.063 SN - 0955-2219 VL - 41 IS - 2021,5 SP - 3108 EP - 3119 ER - TY - CHAP A1 - Unseld, Simon A1 - Baumer, Andreas A1 - Goller, Ralf A1 - Koch, Thorsten A1 - Kühne, Ingo A1 - Frey, Alexander T1 - Design and Analysis of a Hyperelastic Pneumatic Honeycomb Network Made of Ecoflex 00-35 T2 - Proceedings of the COMSOL Conference KW - hyperelasticity KW - Mooney Rivlin KW - pneumatic honeycomb network Y1 - 2020 UR - https://www.comsol.com/paper/design-and-analysis-of-a-hyperelastic-pneumatic-honeycomb-network-made-of-ecofle-94101 SN - 978-1-7364524-0-0 ER -