Zweitveröffentlichung
Refine
Year of publication
Document Type
- Article (165)
- Conference Proceeding (28)
- Other (12)
- Report (4)
- Book (3)
- Working Paper (3)
- Part of a Book (2)
- Contribution to a Periodical (2)
- Postprint (2)
- Part of Periodical (1)
Has Fulltext
- yes (223)
Is part of the Bibliography
- yes (223)
Keywords
- TMT (4)
- climate change (4)
- sustainability (4)
- Biodiversity (3)
- Central Asia (3)
- UAV (3)
- agroforestry (3)
- biodiversity (3)
- ecosystem services (3)
- sustainable development (3)
Institute
- Fachbereich Wald und Umwelt (86)
- Fachbereich Landschaftsnutzung und Naturschutz (58)
- Fachbereich Holzingenieurwesen (29)
- Centre for Econics and Ecosystem Management (16)
- Forschungszentrum [Nachhaltigkeit - Transformation - Transfer] (14)
- Biosphere Reserves Institute (13)
- Zentrale Hochschuleinrichtungen (8)
- Fachbereich Nachhaltige Wirtschaft (4)
- ZENAT (2)
- Nachhaltiges Tourismusmanagement M.A. (1)
Despite being a natural soil-forming process, soil acidification is a major agronomic challenge under humid climate conditions, as soil acidity influences several yield-relevant soil properties. It can be counterbalanced by the regular application of agricultural lime to maintain or re-establish soil fertility and to optimize plant growth and yield. To avoid underdose as well as overdose, lime rates need to be calculated carefully. The lime rate should be determined by the optimum soil pH (target pH) and the response of the soil to lime, which is described by the base neutralizing capacity (BNC). Several methods exist to determine the lime requirement (LR) to raise the soil pH to its optimum. They range from extremely time-consuming equilibration methods, which mimic the natural processes in the soil, to quick tests, which rely on some approximations and are designed to provide farmers with timely and cost-efficient data. Due to the higher analytical efforts, only limited information is available on the real BNC of particular soils. In the present paper, we report the BNC of 420 topsoil samples from Central Europe (north-east Germany), developed on sediments from the last ice age 10,000 years ago under Holocene conditions. These soils are predominantly sandy and low in humus, but they exhibit a huge spatial variability in soil properties on a small scale. The BNC was determined by adding various concentrations of Ca(OH)2 and fitting an exponential model to derive a titration curve for each sample. The coefficients of the BNC titration curve were well correlated with soil properties affecting soil acidity and pH buffer capacity, i.e., pH, soil texture and soil organic matter (SOM). From the BNC model, the LRs (LRBNC) were derived and compared with LRVDLUFA based on the standard protocol in Germany as established by the Association of German Agricultural Analytic and Research Institutes (VDLUFA). The LRBNC and LRVDLUFA correlated well but the LRVDLUFA were generally by approximately one order of magnitude higher. This is partly due to the VDLUFA concept to recommend a maintenance or conservation liming, even though the pH value is in the optimum range, to keep it there until the next lime application during the following rotation. Furthermore, the VDLUFA method was primarily developed from field experiments where natural soil acidification and management practices depressed the effect of lime treatment. The BNC method, on the other hand, is solely based on laboratory analysis with standardized soil samples. This indicates the demand for further research to develop a sound scientific algorithm that complements LRBNC with realistic values of annual Ca2+ removal and acidification by natural processes and N fertilization.
Evaluating Soil-Borne Causes of Biomass Variability in Grassland by Remote and Proximal Sensing
(2019)
On a grassland field with sandy soils in Northeast Germany (Brandenburg), vegetation indices from multi-spectral UAV-based remote sensing were used to predict grassland biomass productivity. These data were combined with soil pH value and apparent electrical conductivity (ECa) from on-the-go proximal sensing serving as indicators for soil-borne causes of grassland biomass variation. The field internal magnitude of spatial variability and hidden correlations between the variables of investigation were analyzed by means of geostatistics and boundary-line analysis to elucidate the influence of soil pH and ECa on the spatial distribution of biomass. Biomass and pH showed high spatial variability, which necessitates high resolution data acquisition of soil and plant properties. Moreover, boundary-line analysis showed grassland biomass maxima at pH values between 5.3 and 7.2 and ECa values between 3.5 and 17.5 mS m−1. After calibrating ECa to soil moisture, the ECa optimum was translated to a range of optimum soil moisture from 7% to 13%. This matches well with to the plant-available water content of the predominantly sandy soil as derived from its water retention curve. These results can be used in site-specific management decisions to improve grassland biomass productivity in low-yield regions of the field due to soil acidity or texture-related water scarcity.
Dominant agricultural and food systems lead to continuous resource depletion and unacceptable environmental and social impacts. While current calls for changing agrifood systems are increasingly framed in the context of sustainability transitions, they rarely make an explicit link to transition studies to address these systemic challenges, nor do transition scholars sufficiently address agri-food systems, despite their global pertinence. From this viewpoint, we illustrate several gaps in the agri-food systems debate that sustainability transition studies could engage in. We propose four avenues for research in the next decade of transition research on agri-food systems: 1) Crossscale dynamics between coupled systems; 2) Social justice, equity and inclusion; 3) Sustainability transitions in low- and middle-income countries; 4) Cross-sectoral governance and system integration. We call for a decade of new transition research that moves beyond single-scale and sector perspectives toward more inclusive and integrated analyses of food system dynamics.
With increasing road encroachment, habitat fragmentation by transport infrastructures has been a serious threat for European biodiversity. Areas with no roads or little traffic (“roadless and low-traffic areas”) represent relatively undisturbed natural habitats and functioning ecosystems. They provide many benefits for biodiversity and human societies (e.g., landscape connectivity, barrier against pests and invasions, ecosystem services). Roadless and low-traffic areas, with a lower level of anthropogenic disturbances, are of special relevance in Europe because of their rarity and, in the context of climate change, because of their contribution to higher resilience and buffering capacity within landscape ecosystems. An analysis of European legal instruments illustrates that, although most laws aimed at protecting targets which are inherent to fragmentation, like connectivity, ecosystem processes or integrity, roadless areas are widely neglected as a legal target. A case study in Germany underlines this finding. Although the Natura 2000 network covers a significant proportion of the country (16%), Natura 2000 sites are highly fragmented and most low-traffic areas (75%) lie unprotected outside this network. This proportion is even higher for the old Federal States (western Germany), where only 20% of the low-traffic areas are protected. We propose that the few remaining roadless and low-traffic areas in Europe should be an important focus of conservation efforts; they should be urgently inventoried, included more explicitly in the law and accounted for in transport and urban planning. Considering them as complementary conservation targets would represent a concrete step towards the strengthening and adaptation of the Natura 2000 network to climate change.
Remotely sensed effectiveness assessments of protected areas lack a common framework: A review
(2022)
Effective protected areas reflect socio-ecological values, such as biodiversity and habitat maintenance, as well as human well-being. These values, which safeguard ecosystem services in protected areas, are treated as models for the sustainable preservation and use of resources. While there is much research on the effectiveness of protected areas in a variety of disciplines, the question is whether there is a common framework that uses remote sensing methods. We conducted a qualitative and a quantitative analysis of 44 peer-reviewed scientific papers utilizing remote sensing data in order to examine the effectiveness of protected areas. Very few studies to date have a wide or even a global geographical focus; instead, most quantify the effectiveness of protected areas by focusing on local-scale case studies and single indicators such as forest cover change. Methods that help integrate spatial selection approaches, to compare a protected area's characteristics with its surroundings, are increasingly being used. Based on this review, we argue for a multi-indicator-based framework on protected area effectiveness, including the development of a consistent set of socio-ecological indicators for a global analysis. In turn, this will allow for globally applicable use, including a concrete evaluation that considers the diversity of regional parameters, biome-specific variables, and political frameworks. Ideally, such a framework will enhance the monitoring and evaluation of global strategies and conventions.
Expectations of what forests and woodlands should provide vary among locations, stakeholder groups, and over time. Developing multifunctional forests requires understanding of the dynamic roles of traditions and cultural legacies in social-ecological systems at multiple levels and scales. Implementing policies about multifunctional forests requires a landscape and social-ecological perspective, and recognition of both spatial and temporal features at multiple scales. This study explores the dissemination of even-aged silviculture in central, eastern and northern Europe, and the consequences of choosing different vantage points in social-ecological systems for mapping of barriers, and to identify levers, towards multifunctional forest landscapes. Using a narrative approach, we first summarise the development of even-aged silviculture in four European regions. Next, we focus on Sweden as a keen adopter of even-aged silviculture, and identify levers at three groups of vantage points. They were (1) biosphere with biodiversity as short-hand for composition, structure and function of ecosystems, which support human well-being at multiple scales; (2) society in terms of different levels of stakeholder interactions from local to global, and (3) economy represented by value chain hierarchies and currencies. The emergence of even-aged silviculture >200 years ago formed an expanding frontier from central to northern Europe. Sustained yield wood production and biodiversity conservation encompass different portfolios of ecosystem aspects and spatio-temporal scales. Ignorance and lack of knowledge about these differences enforce their mutual rivalry. An exploratory review of six groups of stakeholders at multiple levels in the traditional industrial forest value chain highlights inequalities in terms of distribution of income and power across different levels of governance. This effectively marginalises other than powerful industrial actors. The distribution of financial results along the value chain is dynamic in space and time, and not all benefits of forest ecosystems can be measured using monetary valuation. There are also other currencies and incentives. A discussion of cultural trajectories in central and eastern European, Russian and Swedish forest management illustrates that forest history patterns repeat themselves. Longitudinal case studies of countries and regions can help foster holistic multi-dimensional and multi-level systems thinking. Application of deep levers of change is likely to require external drivers. A key challenge is to handle the manufacturing of doubt and decay of truth, i.e., the appearance of alternative facts, and the diminishing role of evidence and systems analyses in political and civic discourses. This transition is fuelled by new and rapidly evolving digital arenas.
Little is known about the emergence and development of novel governance approaches for forest ecosystem services provision, what drives them, and how they can be fostered. Existing frameworks often deal with single aspects of resource management and thus fail to assess processes, multi-level influences, and interacting dimensions and factors in a system-based understanding. In this article, we introduce the conceptual foundation and an empirical application of an adapted Social-Ecological System framework with additional elements that builds on the idea of complex and interlinked social-ecological-technical-forestry-innovation systems that allows for the identification of key factors for revealing forest ecosystem services dynamics to understand the emergence and development of such governance innovations. The development and testing of the framework was based on six case studies for knowledge co-creation. To showcase its application, two governance innovations were examined: a voluntary carbon market payment scheme in Germany and a network approach for forest-pasture management in Italy. The application of the framework reveals required adaptations to improve innovation by systematically unpacking the system dimensions and identifying fostering and hindering factors and their interdependencies. We highlight the output of a sound system-based information basis that allows for purposeful innovation conditioning by policy makers, practitioners, and other related actors.
Forests are key components of European multifunctional landscapes and supply numerous forest ecosystem services (FES) fundamental to human well-being. The sustainable provision of FES has the potential to provide responses to major societal challenges, such as climate change, biodiversity loss, or rural development. To identify suitable strategies for the future sustenance of FES, we performed a solution scanning exercise with a group of transdisciplinary forest and FES experts from different European regions. We identified and prioritized fifteen major challenges hindering the balanced provision of multiple FES and identified a series of potential solutions to tackle each of them. The most prominent challenges referred to the increased frequency and impacts of extreme weather events and the normative mindset regarding forest management. The respective solutions pointed to the promotion of forest resilience via climate-smart forestry and mainstreaming FES-oriented management through a threefold strategy focusing on education, awareness raising, and networking. In a subsequent survey, most solutions were assessed as highly effective, transferable, monitorable, and with potential for being economically efficient. The implementation of the solutions could have synergistic effects when applying the notion of leverage points. Seven emerging pathways towards the sustainable supply of FES have been identified. These pathways build on each other and are organized based on their potential for transformation: (1) shifting forest management paradigms towards pluralistic ecosystem valuation; (2) using integrated landscape approaches; (3) increasing forest resilience; (4) coordinating actions between forest-related actors; (5) increasing participation in forest planning and management; (6) continuous, open, and transparent knowledge integration; and (7) using incentive-based instruments to support regulating and cultural FES. These pathways can contribute to the implementation of the new EU Forestry Strategy to support the balanced supply of multiple FES.
Governance Innovations for forest ecosystem service provision – Insights from an EU-wide survey
(2022)
This paper analyses the occurrence of governance innovations for forest ecosystem service (FES) provision in the forestry sector in Europe and the factors that influence innovation development. Based on a European-wide online survey, public and private forest owners and managers representing different property sizes indicate what type of governance innovation activities they engage in, and why. To investigate forestry innovations as systems, the analysis focuses on biophysical, social and technical factors influencing innovation development. The results of our exploratory quantitative analysis show that most innovation activities identified are largely oriented towards biomass production. Accordingly, most forest owners implement efficiency-driven optimisation strategies for forest management and technological improvement for provisioning service supply, to generate income. In contrast, the provision of regulating and cultural services is not yet a prominent part of forestry innovation activities.Reasons are rooted in a market-oriented economic rationale focusing on timber production, a lack of financial resources to compensate for other FES provisions or institutions to provide backup and security to forest owners and managers for engaging in innovation development. Given that the provision of a wide range of FES is a politically well-established objective for forest management in Europe, a strategy is needed that helps to align actors and sectors for supporting and co-financing related forest management approaches and business models. The current revision of the forest related policy framework on EU level under the EU Green deal poses a window of opportunity for better fostering novel governance approaches for more sustainable FES provision.
Enduring sustainability challenges requires a new model of collective leadership that embraces critical reflection, inclusivity and care. Leadership collectives can support a move in academia from metrics to merits, from a focus on career to care, and enact a shift from disciplinary to inter- and trans-disciplinary research. Academic organisations need to reorient their training programs, work ethics and reward systems to encourage collective excellence and to allow space for future leaders to develop and enact a radically re-imagined vision of how to lead as a collective with care for people and the planet.
Forest ecosystems provide a range of goods and services that are essential to human well-being. Yet global environmental problems, increasing urbanization, industrialization pressures, and dominant market mechanisms put into jeopardy the long term sustainable provision of forest ecosystem services (FES). Markets tend to favor private goods, such as timber, and are typically less able to provide sustainable financing mechanisms for public goods and services, such as carbon storage, biodiversity conservation or recreational value. European forest owners and policy makers alike are looking for governance innovations that generate economic opportunity while ensuring the future provision of FES.
This systematic literature review aims to consolidate existing academic empirical research on local or regional level governance innovations in Europe concerned with generating forest-based revenue through FES provision. Thus, it complements conceptual literature dealing with challenges and opportunities of financing the provision of FES. When conducting the review we followed the process guidelines developed by ‘Collaboration for Environmental Evidence’ (Collaboration for Environmental Evidence, 2018). Out of a total of 3962 scanned papers, 23 papers containing 48 case studies were identified and analyzed in detail, to address the following guiding questions: (1) What types of FES related (governance) innovations for forest-based revenue generation exist and which FES do they address? (2) What are the motivations driving innovation development? (3) What are the implications for forest management? We found four types of governance innovations: forest product and organizational innovations which largely relate to provisioning FES; service innovations, which generally relate to cultural FES; and financial incentive systems or payment schemes targeting mostly regulating services. We identify potential synergies between two high-priority EU policy objectives: rural economic development and securing future FES provision. Currently, governance innovations’ forest management implications and associated impact on (future) FES provision are rarely addressed in this literature. We recommend future policy and research to give greater consideration to the interdependencies between securing a range of FES, (rural) economic development, and forest management, to realize potential synergies.
This Special Issue provides insights into conceptual approaches, methodological procedures and practice findings for the development and assessment of governance innovations for the sustainable provision of forest ecosystem services (FES) in Europe. We depart from the observation that the sustainable and balanced provision of FES requires novel policy, management and business approaches that need to overcome challenges in order to emerge, develop and flourish. These challenges are rooted in the diversity of forest ecosystems and institutional contexts, a lack of system understanding, of innovation dynamics, the public good character of many FES, and a production-oriented reference frame for forest management. We use a set of good governance innovation practices in form of new actor alliances and payment schemes as a basis for assessment and learning how to promote different kinds or bundles of FES. The contributing authors of the SI combine several methodological approaches to understand the working conditions of such innovations, including integrated mapping, stakeholder and governance analysis, and a forward-looking scenario approach for innovation assessment. Applying multi-methods and multi-actor approaches fruitfully orchestrated a constructive debate among stakeholders on the chances and challenges of governance innovations in Europe, to allow for their uptake in forest policy, business and practice.
An increasing number of small and medium-sized enterprises (SMEs) in the German organic agri-food sector involves citizens through different community financing models. While such models provide alternative funding sources as well as marketing opportunities to SMEs, they allow private investors to combine their financial and ethical concerns by directly supporting the development of a more sustainable food system. Due to the low level of financial intermediation, community financing is characterized by close relations between investors and investees. Against this background, we apply the proximity concept from economic geography to explore spatial and relational aspects of community financing in the German organic agri-food sector. Based on a qualitative multiple case study approach, we find that the relevance of proximity is twofold. While different forms of proximity between SMEs and their potential investors are key success factors, proximity is also considered as one desired outcome of community financing. Furthermore, our results reveal that the extent to which SMEs rely on particular proximity dimensions distinguishes two different approaches to community financing.
Purpose
The present study explores the development of agri-food value chains from an organizational learning perspective, using the German organic food sector as an example. We illustrate how the development of local value chains unfolds over time and outline how facilitation can support this process.
Design/methodology/approach
The study used an action research design to facilitate change in practice and to create new knowledge. Data were collected through qualitative interviews, participant observation, and documentation of workshops and other learning activities. Data analysis and conceptualization followed a grounded theory approach.
Findings
The development process of value chains occurs in three phases, from joint exploration of the problem, through a phase of experimentation and implementation, to further cultivation of established collaborations among value chain actors. The development process oscillates between intra- and inter-organizational learning as well as explorative and exploitative activities.
Practical implications
The results of this study can help to understand and to further professionalize the practice of value chain development and provide guidance for facilitators and other stakeholder working in this field.
Theoretical implications
By drawing on the theory of exploration and exploitation, the study enhances the understanding of value chains collaboration in an inter-organizational setting. The study conceptualizes the development of agri-food value chains and the role of facilitators in the process.
Originality/value
There is little research to date that considers the development of value chains as a collaborative learning process. The presented grounded theory of local value chain development may inform further research on the transition towards a more sustainable agri-food system.
A large variety of organisations provides support for cooperative approaches in the field of research and innovation in agriculture, forestry and rural development, and acts as Innovation Support Services (ISS). The findings from ProAkis (2015) show that different types of organisations such as administrative offices, public or semi-public advisory services, rural academies/universities, producer organisations, other NGOs or private consultants engaged in the Agricultural Knowledge and Innovation System (AKIS) can act as ISS. The funding of ISS can be public, private or a mix of both. A literature review indicates that studies often focus on the
larger “enabling environment” and the structure of the Agricultural Knowledge and Innovation Systems (AKIS). Moreover, many authors pay particular attention to the role of public or semi-public farm advisory organisations (Knierim et al., 2015; Sulaiman 2015). The paper is based on the analysis of more than 200 case studies of publically or privately funded interactive innovation projects within the EU and beyond. The selection of cases took place under the framework of the Horizon2020-funded European research and innovation project LIAISON. European and national databases contain several thousands of projects in agriculture, forestry and rural development. We selected projects applying the interactive innovation approach from a) EU programmes (EIP-Agri, Horizon2020, Interreg, and LIFE+); b) nationally/regionally or privately funded projects; and c) informal initiatives or networks in the agri-food, forestry, bioeconomy or nature conservation area. The results indicate that publically funded IIS play a core role for legal/administrative compliance of projects. Semi-public advisory services take up this role as well, and they are strong in linking farmers with scientists, technicians, entrepreneurs etc. However, they often exist and offer efficient ISS only for those industries that have a long tradition for a sector or area (e.g. dairy, pork, poultry or club fruit). This paper shows that different types of organisations (research institutes, farmers or producer organisations, NGOs, processing or marketing SMEs, or public bodies) provide various forms of support for the studied interactive innovation groups. No particular type of organisation such as the farm advisory services are more suitable than the other organisations for the delivery of ISS. Instead, it depends on former collaboration, the particular topic, objective or capacities available as well as the cultural/political context who engages in interactive innovation and provides innovation support.
There is a strong demand in media management to strengthen the bridge between theory and practice. Following the debate on rigor and relevance, the approach of engaged scholarship and arguments from our community, we see the need to develop a research agenda in dialogue with practice. Therefore, we explore the following questions: Which topics do media managers consider relevant to research? How can these issues be contrasted with the research agendas proclaimed by media management research?
To answer these questions, we first summarize current issues in media management research through a literature review. Second, current issues in media management practice are captured based on an online survey with German media managers (N=46). Finally, the two perspectives are contrasted to develop relevant questions for media management research and practice.
This article aims to build a better understanding of entrepreneurial communication and strategic communication. The term entrepreneurial is finding its way into the discussion of communication science in general and strategic communication in particular, for example, through the consideration of startups. So far, the term entrepreneurial communication remains vague, is hardly defined and is not systematically distinguished from strategic communication. By applying an analogies lens in the context of problematizing, differences between the terms entrepreneurial and strategic in entrepreneurial communication and strategic communication are explored based on selected given definitions. As a result, three unifying dimensions – development stage, mode, and logic – are developed to highlight fundamental differences between the two terms. To create potential for a future creation of entrepreneurial communication as research program, and to elaborate on future potential for strategic communication in relation to this, central theoretical approaches in entrepreneurship research and their potential to research entrepreneurial communication are explored.
The density of phytophagous insect pest populations is related (directly and indirectly) to several groups of factors that can be broadly divided into: abiotic, biotic and anthropogenic. Each extreme in the abiotic environment at a macro-level leads to a series of consecutive extremes in the biotic environment, which eventually results in micro-level responses in the individual organisms. The manifestation of factors acts in aggregate or in a sequence, creating a chain of processes around us. Insects very efficiently use the abundance of nutritional resources, resulting in a tremendous increase in their population density, and triggering control mechanisms through the emergence of parasitic and pathogenic infections (viruses, bacteria, fungi, microsporidia, protozoa and nematodes). The development of entomopathogenic infections in host populations is directly dependent on the characteristics of both the antagonist and the insect. It is associated with the lifestyle and life cycle of the insect, with features encoded in the mechanism of pathogen action, and limited by the pathogen’s virulence and pathogenicity.
Zukunftstechnologien üben schon seit geraumer Zeit Transformationsdruck auf Medienorganisationen aus (Küng, 2008). Medienorganisationen sind daher gezwungen, gezielt zu reagieren, sich zu verändern und zu lernen. Ein theoretisches Konstrukt, das diesen Prozess erklärt, ist die Theorie des organisationalen Lernens (OL) (Senge, 2006). In der allgemeinen Managementforschung ist OL bereits ein etablierter theoretische Ansatz (Dick, 2005), bei Medienorganisationen wurde OL bislang kaum erforscht (Bernhard & Will, 2021). Die strategische Orientierung der Organisation stellt eine Möglichkeit zur Förderung des OL dar (Seçkin-Halaç, 2019). Insbesondere die strategische Technologieorientierung (TO) könnte in Anbetracht von Zukunftstechnologien hilfreich für OL sein (ebd.). Vor diesem Hintergrund beschäftigt sich dieser Beitrag mit der folgenden Frage: Besteht ein Zusammenhang zwischen der Technologieorientierung (TO) und dem organisationalen Lernen (OL) in Medienorganisationen? Zur Beantwortung dieser Frage wurde eine explorative Onlineumfrage (Zeitraum: Dez. 2020 bis Jan. 2021) unter deutschen Medienmanager*innen (N=46) durchgeführt. Für die Untersuchung wurden die Instrumente von Hakala & Kohtamäki (2011) für die TO und von Marsick & Watkins (2003) für das OL übernommen. Die Umfragedaten wurden mithilfe der Rangkorrelation nach Spearman analysiert. Kernergebnis der Untersuchung ist, dass ein signifikanter Zusammenhang zwischen TO und OL besteht.
Conservation grazing uses semi-feral or domesticated herbivores to limit encroachment in open areas and to promote biodiversity. However, we are still unaware of its effects on wild herbivores. This study investigates the influence of herded sheep and goats on red deer (Cervus elaphus) spatial behavior by testing three a-priori hypotheses: (i) red deer are expected to avoid areas used by livestock, as well as adjacent areas, when livestock are present, albeit (ii) red deer increase the use of these areas when sheep and goats are temporarily absent and (iii) there is a time-lagged disruption in red deer spatial behavior when conservation grazing practice ends. Using GPS-telemetry data on red deer from a German heathland area, we modelled their use of areas grazed by sheep and goats, using mixed-effect logistic regression. Additionally, we developed seasonal resource selection functions (use-availability design) to depict habitat selection by red deer before, during, and after conservation grazing. Red deer used areas less during conservation grazing throughout all times of the day and there was no compensatory use during nighttime. This effect mostly persisted within 21 days after conservation grazing. Effects on habitat selection of red deer were detectable up to 3000 meters away from the conservation grazing sites, with no signs of either habituation or adaption. For the first time, we demonstrate that conservation grazing can affect the spatio-temporal behavior of wild herbivores. Our findings are relevant for optimizing landscape and wildlife management when conservation grazing is used in areas where wild herbivores are present.
As wolves recolonize areas of Europe ranging from moderate to high anthropogenic impact, fear of wolves is a recurring source of conflict. Shared tools for evaluating wolf responses to humans, and comparing such responses across their range, can be valuable. Experiments in which humans approach wild wolves can increase our understanding of how wolves respond to humans, facilitating human-wolf coexistence. We have developed the first standardized protocol for evaluating wolf responses to approaching humans using high-resolution GPS data, and tested it on wild wolves. We present a field protocol for experimentally approaching GPS-collared wolves, a descriptive comparison of two statistical methods for detecting a measurable flight response, a tutorial for identifying wolf flight initiation and resettling positions, and an evaluation of the method when reducing GPS positioning frequency. The field protocol, a data collection form, and the tutorial with R code for extracting flight parameters are provided. This protocol will facilitate studies of wolf responses to approaching humans, applicable at a local, national, and international level. Data compiled in a standardized way from multiple study areas can be used to quantify the variation in wolf responses to humans within and between populations, and in relation to predictors such as social status, landscape factors, or human population density, and to establish a baseline distribution of wolf response patterns given a number of known predictors. The variation in wolf responses can be used to assess the degree to which results can be generalized to areas where GPS studies are not feasible, e.g., for predicting the range of likely wolf behaviors, assessing the likelihood of wolf-human encounters, and complementing existing tools for evaluating reports of bold wolves. Showing how wolves respond to human encounters should help demystify the behavior of wild wolves toward humans in their shared habitat.
Celtis mildbraedii sawdust (CMS) from Ghana was characterised to investigate its suitability with polyethylene terephthalate (PET) for syngas production via co-pyrolysis. The physical and chemical properties assessed include proximate and ultimate compositions, pH value, higher heating value (HHV), and lignocellulosic composition. Also, the thermal behaviour at different heating rates (5, 10, and 20 K/min) and qualitative prediction of organic compounds of CMS were examined using thermogravimetric analysis (TG/DTG) and NIR spectroscopy techniques, respectively. Results of proximate analysis (moisture = 17.15 ± 0.0 wt.%, ash = 1.13 ± 0.4 wt.%, volatile matter = 68.39 ± 0.4 wt.%, fixed carbon = 13.33 ± 0.8 wt.%); ultimate analysis (C = 48.51 wt.%, H = 6.66 wt.%, N = 0.51 wt.%, S = 0.02 wt.%, O = 44.30 wt.%); pH values (cold phase = 7.60, hot phase = 6.30); HHV (15.37 – 18.03 MJ/kg); and lignocellulosic composition (extractives = 13.80 ± 0.57 wt.%, hemicellulose = 21.95 ± 3.89 wt.%, lignin = 17.35 ± 0.35 wt.%, cellulose = 46.90 ± 2.97 wt.%) were obtained. The maximum mass loss was 83.48% at 289.8 °C at 5 K/min. It was concluded that CMS is a highly potential biomass resource for syngas production with an empirical formula of CH1.64O0.69N0.009S0.0001.
Wood and wood-based products are widely used for structural building elements, but due to their composition, they are susceptible of combusting if exposed to fire. Fire safety is an important issue of building safety, especially when the building's fire load contents enhance the risks of fire spread. Therefore, the involved materials are very important to address the fire safety requirements. When existing timber structures are involved, the most usual way to improve its reaction to fire is to treat wood with fire retardant materials.
The idea of this paper is to give an overall overview, on the existing fire-retardant and intumescent coating materials, modification, and treatments that can be applied to wood and wood-based products in order to improve their reaction to fire.
Im Rahmen des Projektes „Brandenburg spezifische Boden-Indikatoren für ein Klimamonitoring im Rahmen der Deutschen Anpassungsstrategie
(DAS) sowie Zusammenstellung von aussagefähigen Wirkungs- und Alarmschwellen“ sind Kenntnisse über die spezifische
Gefährdung der Brandenburger Böden zusammengestellt worden. Basierend auf den Prognosen von Gerstengarbe et al. (2003) und Zebisch et al. (2005) wird Brandenburg durch die prognostizierten Klimaveränderungen besonders betroffen sein. Diese werden sich vor allem in Veränderungen in Niederschlagsverteilungen, Niederschlagsformen und steigenden
Temperaturen äußern. Besonders die Umverteilung der Niederschläge und steigende Temperaturen im Winterhalbjahr können den Wasserhaushalt des Bodens negativ beeinflussen (Linke et al., 2011). Eine Verringerung der Niederschläge im Sommerhalbjahr wird deutlich erkennbare Auswirkungen auf die bisher betriebene Landwirtschaft haben. Aufgrund
der Veränderungen der Niederschlagsformen, mit zunehmenden Starkniederschlägen, ist mit häufigerem Auftreten von Bodenerosion sowie von lokalen und regionalen Hochwasserereignissen zu rechnen. Die befragten Experten betonen, dass im Boden Nutzungsänderungen
voraussichtlich wesentlich stärker und schneller sichtbar werden als durch Änderungen im Klima. Dadurch kann ein negativer Einfluss der
Klimaveränderungen durch frühzeitige Nutzungsanpassung kompensiert werden.
The aim of this study was the development of a methodical processing line for estimating the log’s volume from scanning logs using a long-range high-speed personal laser scanner (PLS) GeoSLAM ZEB HORIZON and simultaneous localization and mapping (SLAM) technology in an open-source software framework of Cloud Compare. Additionally, the accuracy and precision of using PLS and the suggested method when measuring roundwood volume was examined compared to measurements made using a xylometer and estimations obtained from applying the formulae of Huber, Smalian and Newton. For this purpose, several parameters were measured in 50 logs of Norway spruce with an average length of 2.53 m and a mean diameter of 19.97 cm. Afterwards, the volume of these 50 logs was measured with a xylometer. The results of these measurements served as reference values. The same 50 logs were subsequently scanned with the PLS. The scans were converted into point clouds and were analyzed in Cloud Compare to estimate the volume of the scanned logs. Next, the root mean square error (RMSE) and the mean bias error (MBE) as well as their relative values were calculated for the volumes determined in Cloud Compare and estimated with the above mentioned formulae. The calculated RMSE (and relative RMSE) determined a deviation of the logs' volumes estimated in Cloud Compare from the xylometric volumes of 2.88 dm3 (3.54%) whereas the deviations of the log’s volumes calculated applying the formulae of Huber, Smalian and Newton from the xylometric volumes were respectively 9.63 dm3 (11.83%), 10.33 dm3 (12.69%) and 4.69 dm3 (5.76%). The calculated MBE (and relative MBE) showed that the estimated volumes in Cloud Compare and those using the formulae were overestimated, with the lowest overestimation of 0.10 dm3 (0.12%) in Cloud Compare and the highest, 5.50 dm3 (6.75%), using the Smalian formula. Therefore, it can be stated that results of suggested methodical processing line came closest to the logs' volumes obtained with the xylometer, i.e., they were more accurate and precise compared to the conventionally formulae for log’s volume estimation. The implementation of this method has the potential filling a gap towards a wall-to-wall complete digitization of the roundwood commercialization and ensure transparency and acceptance between the stakeholders involved in the wood supply chain.
One method for estimating the solid wood content in a stack involves using conversion factors and multiplying these by the measured gross volume. The conversion factors can vary depending on several log and stack parameters. The aim of this study was to analyze eleven parameters using a 3D simulation model based on 541 measured logs of Norway spruce. To this end, 50 data sets were created from measured logs, where the parameters of interest in this study (e.g., length, crookedness, taper …) were classified according to different ranges. After that, 64 runs of simulations were carried out. In each simulation run, 150 stacks were modeled. The simulation results were compared with previous studies and with the measurement guidelines of several countries. This analysis revealed that the parameters midpoint diameter, length, crookedness, delimbing quality and the proportion of moderately and highly crooked logs in a stack have a considerable influence on the conversion factors. Taper, proportion of butt logs in a stack and stack height have a modest effect as do the proportion of tapered and crooked logs for low and high taper and low crookedness. In contrast, ovality and the proportion of logs stacked in opposite directions have a marginal influence on the conversion factors. Based on findings from these analyses, the current measurement guidelines of different countries can now be adapted to achieve a higher degree of accuracy.
Assessing the solid wood content is crucial when acquiring stacked roundwood. A frequently used method for this is to multiply determined conversion factors by the measured gross volume. However, the conversion factors are influenced by several log and stack parameters. Although these parameters have been identified and studied, their individual influence has not yet been analyzed using a broad statistical basis. This is due to the considerable financial resources that the data collection entails. To overcome this shortcoming, a 3D-simulation model was developed. It generates virtual wood stacks of randomized composition based on one individual data set of logs, which may be real or defined by the user. In this study, the development and evaluation of the simulation model are presented. The model was evaluated by conducting a sensitivity and a quantitative analysis of the simulation outcomes based on real measurements of 405 logs of Norway spruce and 20 stacks constituted with these. The results of the simulation outcomes revealed a small overestimation of the net volume of real stacks: by 1.2% for net volume over bark and by 3.2% for net volume under bark. Furthermore, according to the calculated mean bias error (MBE), the model underestimates the gross volume by 0.02%. In addition, the results of the sensitivity analysis confirmed the capability of the model to adequately consider variations in the input parameters and to provide reliable outcomes.
The influence that parameters crookedness and taper have on the stack volume was analyzed by using a 3D-simulation model in this study. To do so, log length, diameters at the midpoint and both ends, crookedness, bark thickness, taper and ovality were measured in 1000 logs of Scots pine. From this database, several data sets with different proportions of crooked and tapered logs in stack as well as with different degrees of taper and crookedness were created and taken as basis to simulate the stacks and carry out the analysis. The results show how the variation of these parameters influences the stack volume and provide their volume variation grades. These rates of variation were compared with measurement guidelines of some countries and previous research works. In conclusion, the parameters crookedness and taper influence the stack volume to a considerable extent. Specifically, the stack volume is increased as the crookedness degree or the proportion of crooked logs increases. In contrast, the stack volume is reduced as the taper degree or the proportion of tapered logs increases. Furthermore, the results demonstrate the capability of this simulation model to provide accurate results which can serve as a basis for future studies.
The quantification of the solid wood content in a wood stack has been an object of investigation since the 18th century. Particularly, the log parameters exert a considerable influence on the volume of the stack, such as (1) the log midpoint diameter, (2) average bark thickness, (3) crookedness, and (4) log taper. Although many of these parameters have already been studied and some are already considered in many countries when measuring wood stacks, their influence has not been analyzed individually so far since a broad statistical database is needed and the data collection is very costly. Consequently, a 3D-simulation model was developed based on a cross-platform game engine. This model generates virtual wood stacks based on a data set of logs which are defined by the user. The simulation of a stack can be done in a few seconds only and each stack generated can be visualized once all iterations are done. The simulation results are the stacked cubic volume, solid wood cubic volume, and the respective conversion factors. The model, fed with both real data and user-defined data, allows for a detailed analysis of the effect of each parameter on the results, as the user can vary their values discretionary. To obtain the first results from real data, 1000 logs of Scots pine (Pinus sylvestris L.) were measured. The first simulations based on these data show reliable results and it is possible to quantify the influence of the proportion of crooked wood in a pile on the stack volume and the conversion factor. In addition, the results are highly in line with the real trials that have already been performed in parallel. A further scientific evaluation and statistical analysis will be done in a second study phase. However, the model already provides a reasonable tool that is easy to apply for the forest and wood industry in order to make the most accurate estimate possible of the solid wood content in a wood pile.
The rational use of natural resources is essential for sustainable development. The use of environmentally friendly raw materials, which has minimal environmental impact in its processing, is necessity today. The ecological value of the black locust wood is analyzed based on the study of its use and on the markets in Germany. It is a valuable tree like tropical tree species. It can be obtained by environmentally friendly procurement methods. Therefore, the possibility of growing this invasive species of plants on reclaimed coal-mining dumps under environmental monitoring has been studied. The plantations peculiarities of the black locust plant in the Northeast Lowland of Germany were investigated. The structure, properties of the work wood, and its possibilities of use were analyzed. The principles of sorting and corresponding quality criteria for the wood of the work were considered. We made comparison of the markets in Brandenburg (Germany) and Hungary. Measures to increase the use of work are suggested. The disrupted lands of the Male Polissya are considered as reserve territories for receiving ecological wood of the black locust. It is environmentally justifiable to set aside for this affected areas of coal mining in favourable forest areas. The phytomeliorative properties of black locust tree make it a promising species for afforestation of newly formed ecotopes with wide ecological amplitude in Male Polissya conditions. The creation of reclamation layers of loose soils is a prerequisite for ensuring their uniform growth and development in the conditions of coal-mining dumps. The distribution of the main taxation indices of the black locust stands on the new soils depends on their physicochemical properties and on the microclimatic features of the dumps. This causes differences in the growth and development of black locust plantations, effects on the quality of the wood of black locust and determines the ways of its possible use. Land reclamation effect of black locust plantations is associated with production effect. Simultaneously with receiving the black locust wood, the environmental situation will be getting better, because black locust can protect soil from erosion due to its root system. This is especially important in times of climate change. Black locust plantations on reclaimed coal-mining dumps can be considered as an additional source of the biologically stable wood.
Introduction
The effects of climate change are exacerbating the fire risk in forests worldwide. Conifer plantations in particular are especially vulnerable to fire outbreaks. At the end of the extraordinarily hot and dry summer of 2018, a forest pine plantation burned in Brandenburg, NE Germany. Different forestry interventions were carried out after the fire, while one area of the damaged plantation remained untouched.
Methods
We investigated the resilience of the forest ecosystem and the effectiveness of different active and passive forest restoration measures during the subsequent relatively warm and dry years 2019–2021.
Results
One year after the fire, Populus tremula showed strong spontaneous colonization at all sites. In contrast, the majority of planted Pinus sylvestris plantlets died on the plots that had been salvage-logged after the fire. Three years after the fire, Populus tremula successfully established itself as the dominant tree species on all plots, with the highest abundance on the plot where the overstorey of the dead pines was left. Betula pendula, Salix caprea, and Pinus sylvestris showed lower abundance, with their proportion increasing with decreasing cover by dead trees. The distribution of regrowing trees is very heterogeneous across the different treatments and plots. In the clear-cut plots, the extreme microclimatic conditions expose the young trees to additional heat and drought, while the retention of deadwood measurably buffers the temperature and water stress.
Discussion
The resilience and adaptability of naturally regenerating forests that develop into ecosystems that are more diverse seem more promising than restoration through intervention. Apart from hampering restoration under extreme weather conditions, post-fire salvage logging contributes to soil degradation and loss of organic carbon.
Agricultural intensification decreased land cover complexity by converting small complex arable field geometries into large and simple structures which then were managed uniformly. These changes have led to a variety of negative environmental effects and influence ecosystem services. We present a novel small-scale and site-specific cropping system which splits a large field into small homogeneous sub-fields called ‘patches’ grouped in different yield potentials. A detailed workflow is presented to generate new spatially arranged patches with special focus on preprocessing and filtering of multi-year yield data, the variation in patch sizes and the adaptation of maximum working width to use available conventional farm equipment and permanent traffic lanes. The reduction of variance by the used cluster algorithm depends on the within-field heterogeneity. The patch size, the number of growing seasons (GS) used for clustering and the parallel shift of the patch structure along the permanent traffic lane resulted in a change in relative variance. Independent cross validation showed an increased performance of the classification algorithm with increasing number of GS used for clustering. The applied cluster analysis resulted in robust field segregation according to different yield potential zones and provides an innovative method for a novel cropping system.
Since 2017, the Eberswalde University for Sustainable Development (HNEE) offers transformative learning modules in their curricula, which are called ITL—Innovative Teaching and Learning formats. Student tutors change into the role of teachers and organize lectures, excursions, and assignments at the Real-World Laboratory “Ackerbaum”—an agroforestry system in the federal state of Brandenburg, Germany. Students can learn about agroforestry systems, participate in research, and take practical action. The examination of the module is a scientific report linked to the experimental area. In this study, an attempt was made to verify the quality and impact of teaching formats in the ITL via the analysis of 53 reports created by 170 students as well as surveys among participants. For this purpose, indicators were formulated that capture the quality of scientific methods and the contribution to higher education for sustainable development. Students and tutors appreciate the open working atmosphere and the possibility to actively participate in the course; many leave the module motivated. Some even move toward transformation in agriculture professionally as, e.g., consultants in the field of agroforestry. As a transformative institution, HNEE offers with ITL a rare opportunity for practical application, scientific methods, and transdisciplinary collaboration with different stakeholders to work on future models to change today’s agriculture.
Introducing agro-ecological techniques such as no-tillage systems with cover crops in rotations with soybean (Glycine max (L.) Merr.) could provide more resilience to changing climatic conditions and, at the same time, reduce soil erosion, nitrate leaching, and weed density in the main crop. However, there are challenges in introducing no-tillage techniques in crop systems in Europe as there is little quantitative knowledge about the agro-economic impact. The objectives of this study were to evaluate the agronomic and economic impacts of three soybean cropping systems involving a rye (Secale cereal L.) cover crop prior to soybean, i.e., two no-tillage systems; either herbicide-free with crimping the rye or herbicide-based without rye crimping and one plough-based in which rye was cut as green silage. The impacts of these cropping strategies were compared in a three-year cropping system experiment at a research station in north-eastern Germany with and without irrigation. The following parameters were measured: (1) cover crop biomass; (2) weed biomass; (3) soybean plant density; (4) soybean grain yield; and (5) gross margin of the cropping system. The results showed that all three soybean cropping systems can effectively suppress weeds. System (C), the no-tillage herbicide-based system, produced the lowest rye biomass and highest soybean yield; system (B), the no-tillage herbicide-free/crimped rye system, produced the highest rye biomass and lowest soybean yield compared to system (A), the standard cutting/plough-based system. The differences in rye biomass and soybean yield observed between the three systems could be mainly attributed to the timing of the cover crop termination and the soybean sowing date. The gross margin was highest in system (C), due to the high soybean grain yield. The low soybean grain yield in system (B) resulted in lower revenues and gross margins compared to systems (A) and (C), although system (B) could be economically attractive in organic farming with higher prices for organic soybean. In the particularly dry year 2016, gross margins were higher when soybean was irrigated compared to the rainfed cultivation, due to significantly higher grain yields. Before recommending the application of the no-tillage with cover crop technique for the conditions tested in north-eastern Germany, more investigations on the benefits and risks of this technique are needed. Further research needs to focus on maintaining a high rye biomass as well as on ensuring an early soybean planting date. Optimizing the crimping and drilling equipment is still required in order to develop good management practices for no-tillage herbicide-free systems in European conditions.
As a land use management system, agroforestry has environmental, economic and societal benefits over conventional agriculture or forestry. Important benefits of combining tree growth with agricultural crops and/or forage production systems include higher biodiversity through more diverse habitats, the control of runoff and soil erosion, the augmentation of soil water availability, the creation of microclimates, carbon sequestration and provision of a more diverse farm economy. As the climate changes, north eastern Germany is likely to be particularly prone to severe effects from droughts and wind erosion in the future. However, the area of land under agroforestry makes up less than 2% of the total agricultural area in Germany. Through qualitative interviews with key actors, this study analyzed the benefits of, potentials for and barriers to implementing agroforestry systems in the federal state of Brandenburg. Results showed that agroforestry systems have significant potential in relation to several benefits, particularly the mitigation of soil erosion and stabilization of microclimate regimes. Additionally, agroforestry has the potential to provide wood for energy production or material uses. Although a small but highly innovative and interlinked community exists, administrative barriers and high start-up costs currently hamper the transition from conventional agriculture to agroforestry systems.
The estimation of forest biomass is gaining interest not only for calculating harvesting volumes but also for carbon storage estimation. However, bark (and carbon) compounds are not distributed equally along the stem. Particularly when looking at Scots pine, a radical change in the structure of the bark along the stem can be noted. At the bark transition area, the bark changes from thick and rough to thin and smooth. The aim of our study was (1) to analyze the height of the bark transition area where the bark structure changes and (2) to analyze the effect of cardinal direction on the bark thickness. Regression analyses and forward selection were performed including measured tree height, DBH, bark thickness, crown base height and upper and lower heights of the bark transition areas of 375 trees. While the cardinal direction had no effect on bark thickness, DBH was found to have a significant effect on the heights of the bark transition areas, with stand density and tree height having a minor additional effect. These variables can be used to estimate timber volume (without bark) with higher accuracy and to predict the carbon storage potential of forest biomass according to different tree compartments and compounds.
Abstract
Teacher Education for Sustainable Development (TESD) is a niche innovation in teacher education that empowers teachers to prepare learners to address global socio-environmental challenges. To advance the diffusion of this niche innovation into general teacher education, this article offers a systematic literature review based on a qualitative analysis of 158 peer-reviewed publications on TESD research. Our results show that TESD research is a growing field characterized by five types of inquiry: designing learning environments, understanding learner attributes, measuring learning outcomes, promoting systems change, and advancing visions for the field. Major innovation potentials of TESD for more general teacher education are its emphasis on the grand socio-environmental challenges of our times, methodologies to engage with knowledge diversity (e.g., inter/transdisciplinarity), and sustainability science learning approaches (e.g., backcasting). We suggest that future work builds from this review to strengthen links between teacher education and TESD in enhancing quality education.
This research examines the connection between higher education curricula for sustainable development and student development of key competencies for sustainability. The authors conducted a comparative case study that followed ten students from three graduate sustainability programs. Through a combination of student-generated and contextual data, we created a set of learning journeys. These journeys showed that activities which foster reflection, interaction, and real-world connections are especially critical for competence development as part of the whole curriculum. What and how students found most useful depended on individual disposition and we identified four general categories based on prior experience, attitude to learning, and individual goals. Barriers to competency development were frustration, feelings of helplessness, and being unable to link competence to concrete activities or concepts. These barriers could be mitigated through peer interaction and mentorship, environmental support such as spaces for collaboration, and instructor scaffolding. Because no single course can fit the needs of each student, we recommend that beneficial components in the form of courses that support the above-mentioned activities be part of purposeful curriculum design.
Der 2011 gegründete Verbund für Nachhaltige Wissenschaft (NaWis) strebt die Stärkung transdisziplinärer Nachhaltigkeitswissenschaften an Hochschulen und Forschungsinstituten an. Mit der Hochschule für nachhaltige Entwicklung Eberswalde wird die NaWis-Runde seit September 2021 durch eine Institution gestärkt, der wie kaum einer anderen deutschen Hochschule der Nachhaltigkeitsgedanke ins Stammbuch geschrieben steht.
Can digitalization be designed in such a way that it does not harm the environment or promote unsustainable lifestyles? Can it even promote a green transformation? The authors of this GAIA special issue discuss how stakeholder engagement and transdisciplinary approaches can help address digitalization and sustainability in an integrated way. The special issue deepens insights into the state of knowledge on sustainable digitalization in both scientific and political discourses.
Der europäische Weg
(2022)
Für eine nachhaltige Zukunftsgestaltung spielt es eine zentrale Rolle, Digitalisierung in den Dienst einer nachhaltigen Entwicklung zu stellen. Neben dem chinesischen und dem US‑amerikanischen Modell bleibt die Frage offen, ob sich hierfür ein alternativer, spezifisch europäischer Weg der Digitalisierung herausbilden kann.
The dynamic-mechanical behavior of phenol-formaldehyde-impregnated beech wood (Fagus sylvatica L.) veneers was evaluated at various relative humidities. The aim was to identify the plasticizing effects of moisture on phenol-formaldehyde-impregnated veneers. Thin beech veneer samples were impregnated with a low and a medium molecular weight phenol- formaldehyde resin. The measurements were performed with a dynamic- mechanical thermal analysis equipped with a humidity generator. The storage modulus and the loss factor of the uncured phenol-formaldehyde- impregnated and the untreated control veneers were determined at a relative humidity of 15%, 60%, and 85% and a constant temperature of 25 °C. The untreated control veneers exhibited the smallest reduction of the normalized storage modulus. In contrast, the phenol-formaldehyde- impregnated samples exhibited a more intense relative reduction of the storage modulus with increasing relative humidity. This effect was more distinct for samples impregnated with low molecular weight phenol- formaldehyde than for those impregnated with medium molecular weight phenol-formaldehyde. In addition, higher solids contents in the resins led to even smaller normalized storage modulus. Consistently, the loss factor indicated a greater softening of the samples with an increasing humidity and higher solids content of the phenol-formaldehyde.
The thermal modification of wood is considered to be an environmentally friendly and cost-effective treatment process, which has been able to establish itself in many areas of application due to its positive effect on a whole range of different material properties through a wide variety of process designs. In addition to heat transfer and pressure, closed and open systems differ primarily in the choice of treatment atmosphere mainly used to prevent combustion (Sandberg et al. 2021). Although many studies in recent years have investigated influencing process parameters such as temperature, pressure or treatment duration, there exists a knowledge gap regarding the influence of the treatment atmosphere or its behaviour during the treatment process (Candelier et al. 2016). Therefore, this study aims to analyse different oxygen-nitrogen concentrations in the treatment atmosphere at different residual oxygen levels during the process duration and their influence on different property parameters of Fagus sylvatica (L.).
Impregnation of wood with certain chemical compounds is a well established method to improve its physical and mechanical properties.
However, the result is often not quite homogeneous. This study examines the effect of two varying thermal treatments on the impregnability of sycamore maple (Acer Pseudoplatanus L.) with furfuryl alcohol (FA), and on the resulting Anti-Swelling-Efficiency (ASE).
Recent studies have identified strong relationships between delayed recovery of tree growth after drought and tree mortality caused by subsequent droughts. These observations raise concerns about forest ecosystem services and post-drought growth recovery given the projected increase in drought frequency and extremes. For quantifying the impact of extreme droughts on tree radial growth, we used a network of tree-ring width data of 1689 trees from 100 sites representing most of the distribution of two drought tolerant, deciduous oak species (Quercus petraea and Quercus robur). We first examined which climatic factors and seasons control growth of the two species and if there is any latitudinal, longitudinal or elevational trend. We then quantified the relative departure from pre-drought growth during droughts, and how fast trees were able to recover the pre-drought growth level. Our results showed that growth was more related to precipitation and climatic water balance (precipitation minus potential evapotranspiration) than to temperature. However, we did not detect any clear latitudinal, longitudinal or elevational trends except a decreasing influence of summer water balance on growth of Q. petraea with latitude. Neither species was able to maintain the pre-drought growth level during droughts. However, both species showed rapid recovery or even growth compensation after summer droughts but displayed slow recovery in response to spring droughts where none of the two species was able to fully recover the pre-drought growth-level over the three post-drought years. Collectively, our results indicate that oaks which are considered resilient to extreme droughts have also shown vulnerability when droughts occurred in spring especially at sites where long-term growth is not significantly correlated with climatic factors. This improved understanding of the role of drought seasonality and climate sensitivity of sites is key to better predict trajectories of post-drought growth recovery in response to the drier climate projected for Europe.
There has been a strong quest for mapping and assessing ecosystem services (ES) to support governance. Yet, the institutional landscape that governs ES provision across multiple contexts has received less attention. We fill this research gap by developing and operationalising a framework for the analysis of policy documents that address European forest ES provision. By coding and analysing references to forest ES as well as innovations and governance mechanisms addressing these ES in national strategies on forest, biodiversity and bioeconomy, we map the institutional landscape of forest ES provision in Europe. We further analyse how biophysical supply of forest ES is connected to policies paying attention to ES and identifying innovations and governance for their provision. Innovations identified in policies centre around value chains of wood and bioenergy or biodiversity conservation, while non-wood forest products, cultural heritage, and recreation receive little attention. Biophysical supply of provisioning ES is connected to policies emphasising many innovations, while little supply of regulating ES could trigger service innovations and several new governance mechanisms. As forest ecosystems have received much attention in global, European and national sustainability policies, our institutional mapping illustrates that there is room for more use of innovations in promoting ES provision.
Soybean Nodulation Response to Cropping Interval and Inoculation in European Cropping Systems
(2021)
To support the adaption of soybean [Glycine max (L) Merrill] cultivation across Central Europe, the availability of compatible soybean nodulating Bradyrhizobia (SNB) is essential. Little is known about the symbiotic potential of indigenous SNB in Central Europe and the interaction with an SNB inoculum from commercial products. The objective of this study was to quantify the capacity of indigenous and inoculated SNB strains on the symbiotic performance of soybean in a pot experiment, using soils with and without soybean history. Under controlled conditions in a growth chamber, the study focused on two main factors: a soybean cropping interval (time since the last soybean cultivation; SCI) and inoculation with commercial Bradyrhizobia strains. Comparing the two types of soil, without soybean history and with 1–4 years SCI, we found out that plants grown in soil with soybean history and without inoculation had significantly more root nodules and higher nitrogen content in the plant tissue. These parameters, along with the leghemoglobin content, were found to be a variable among soils with 1–4 years SCI and did not show a trend over the years. Inoculation in soil without soybean history showed a significant increase in a nodulation rate, leghemoglobin content, and soybean tissue nitrogen concentration. The study found that response to inoculation varied significantly as per locations in soil with previous soybean cultivation history. An inoculated soybean grown on loamy sandy soils from the location Müncheberg had significantly more nodules as well as higher green tissue nitrogen concentration compared with non-inoculated plants. No significant improvement in a nodulation rate and tissue nitrogen concentration was observed for an inoculated soybean grown on loamy sandy soils from the location Fehrow. These results suggest that introduced SNB strains remained viable in the soil and were still symbiotically competent for up to 4 years after soybean cultivation. However, the symbiotic performance of the SNB remaining in the soils was not sufficient in all cases and makes inoculation with commercial products necessary. The SNB strains found in the soil of Central Europe could also be promising candidates for the development of inoculants and already represent a contribution to the successful cultivation of soybeans in Central Europe.
Forests are increasingly recognized for their role, importance and multifunctionality in terms of provisioning, regulating and cultural ecosystem services they provide. Even if timber production remains the most economically valuable provisioning service in Primiero, the importance of and need for multifunctionality of forests is acknowledged. This article analyses the development of Forest Ecosystem Services (FES) governance innovation strategies by the Provincial Forest Agency as a policy entrepreneur in the area of Primiero, in Trentino, northeast of Italy. Based on detailed case study material, we create the heuristic of Kingdon’s three streams model in order to reconstruct the development of and negotiations around the introduction of innovative approaches to the problem, policy and politics levels and to identify the chosen or missed windows of opportunity to deliver innovation in FES management. Findings show that the main issues perceived by the local stakeholders concern loss of biodiversity, of cultural identity and historical landscape values. The policy-entrepreneurial initiatives undertaken by the Forest Agency represent a governance mix of direct project execution, financial incentives, organisational incentives and information-based activities. The results highlight its efforts to move beyond the traditional top-down approach based on widely available public funds and towards coordination and collaborations among stakeholders, contribution of private investments, bureaucracy simplification and interconnection between participatory and institutional processes.
In the field of instrument making, the use of indigenous wood species is becoming more and more important due to the increasing environmental awareness of instrument makers and their customers. As the properties of some of these wood species cannot meet the high demands of this field of application, processes are being sought that can achieve improvements. In recent years, many studies have shown that different modification methods, such as furfurylation, thermal treatment, densification or impregnation methods, can partly improve wood properties such as elasticity, strength values, damping behaviour, but also moisture behaviour and wood moisture content significantly. The extent to which different modification processes and their positive changes in properties can be combined with each other and thus achieve further improvements will become increasingly important in the future, not only in instrument making but also in other areas of application. Therefore, this study investigated the influence of thermal treatment followed by linseed oil impregnation of wood on its sound propagation velocity and the associated acoustic properties of characteristic impedance and acoustic radiation.
In recent years, a large number of different studies have shown that a variety of positive property changes can be achieved by thermally treating spruce resonance wood. Various methods have been established, which differ mainly in the choice of treatment atmosphere, but also in the associated treatment duration and temperature. Part of the present investigation was to compare a thermal-vacuum process with a process which takes place in an oxygen-reduced atmosphere, with regard to various property changes. The results show that both processes achieved similar results in terms of dynamic acoustic property changes. Larger differences were found with regard to moisture behavior and color change.
Different parts of the guitar body are made of certain wood species, selected by their specific properties. The sound board, which is mainly made of spruce or cedar, transfers the vibration of the strings to the resonance body by means of the bridge. The sides and the back of the guitar rather reflect the sound of the acoustic vibrations and are predominantly made of tropical hardwoods like palisander, mahogany or ebony species. These species have limited availability and are listed on the CITES Annex I and II. To substitute tropical wood species, thermally modified European wood species with improved acoustic properties and dimensional stability may be used. Although the acoustic reflection of the sides and the back parts of a guitar body is an important property, there is not much knowledge about this reflection behaviour of wood. A few studies like the work of Hong (1989), Kang (2010) or Smardzewski et al. (2013) investigated the sound absorption properties of unmodified wood. Subsequently this study considers the sound absorption coefficients of unmodified and thermally modified European wood species in comparison to an unmodified tropical wood species.
To this day, many guitar makers around the world use primarily tropical woods such as rosewood (Dalbergia spp.) for their production. Due to the current CITES regulation of January 2017 regarding the trade of tropical woods, it becomes inevitable to generate alternative materials with similar material properties to be generated and established. Part of this study is an acoustic comparison of two guitars. One made of untreated tropical wood [Dalbergia nigra Benth.)] and one made of European thermally modified wood (TMT) species. [Pyrus (L.) and Alnus (Mill.)]. The method used allows a significant statement about the acoustic radiation performance of stringed and plucked instruments. The experimental setup consists of an impulse hammer for excitation of a force in the center of the bridge and a microphone for recording the signal radiated by the guitar body at a distance of one meter from the sound hole. A front-end was used to record the data, and further processing was done using analysis software to determine frequency response functions (FRFs) of the two instruments. The FRFs determined can be subdivided into several ranges which contain the different acoustic information about bass range, loudness, clarity, brightness and sharpness of the instruments. Examination of the frequency ranges reveals an acoustic similarity between the two guitars. Slight differences can be seen in the bass and loudness areas, where the guitar from TMT has a higher average level. Clearer differences are offered by the areas of clarity, where the guitar made of tropical wood shows a higher average level. In summary, the method gives an efficient acoustic impression as a function of the natural frequencies of the two guitars. The measured data show similarities and thus comparable acoustic properties of the instruments. However, additional effects such as psychoacoustic sensations or musical taste for the complete acoustic impression of an instrument are also of importance. Therefore, further empirical and fundamental research is needed to obtain a more detailed acoustic impression of the instruments.
This work presents an adaptive architecture that performs online learning and faces catastrophic forgetting issues by means of an episodic memory system and of prediction-error driven memory consolidation. In line with evidence from brain sciences, memories are retained depending on their congruence with the prior knowledge stored in the system. In this work, congruence is estimated in terms of prediction error resulting from a deep neural model. The proposed AI system is transferred onto an innovative application in the horticulture industry: the learning and transfer of greenhouse models. This work presents models trained on data recorded from research facilities and transferred to a production greenhouse.
In Eastern Europe, several UNESCO Biosphere Reserves (BRs) have been important promoters of transnational and transboundary nature conservation and sustainable development. Nevertheless, political and institutional barriers and scarcity of resources have hindered successful cross-border cooperation. The prospects for BRs in Eastern Europe are mixed, especially in relation to the challenges of ecosystem degradation and climate change, as well as socioeconomic and (geo)political crises. Based on our own experience of one and a half decades of growing cooperation between partners in Ukraine and Germany, we conclude that transnational cooperation between BRs and science is particularly rewarding and mutually beneficial.
The muskrat is a neozoon species that has occupied many countries of continental North Europe after its introduction from north America as fur animals. Due to its burrowing activity it damages river and canal banks and structures of flood control. For this reason, the eradication of this alien species is recommended. Muskrats are also of parasitological interest since they can act as suitable intermediate hosts for Echinococcus multilocularis. On the other hand, little is known on the other helminths that infect muskrats. A total of 130 muskrats of different age groups trapped in different habitats in the Barnim district of the Brandenburg state by a professional hunter were examined for parasites and seven trematodes (Echinostoma sp., Notocotylus noyeri, Plagiorchis elegans, Plagiorchis arvicolae, Psilosostoma simillimum, P. spiculigerum, Opisthorchis felineus and four larval cestode species (Hydatigera taeniaeformis, Taenia martis, Taenia polyacantha, Taenia crassiceps) were detected. Larval stages of E. multilocularis were not found. O. felineus was found for the first time in muskrats in Germany. All the named parasites were present in Europe prior to the introduction of muskrats. With a prevalence of 48.9%, Strobilocercus fasciolaris, the larval stage of the cat tapeworm, H. taeniaeformis, was the most frequent parasite found in adult muskrats.
The development of sustainable agri-food systems requires not only new academic knowledge, but also concrete social and organizational change in practice. This article reflects on the action research process that supported and explored the learning process in an emerging agri-food value chain in the Berlin-Brandenburg region in eastern Germany. The action research study involved value chain actors, academic researchers, and process facilitators in a learning network. By framing the network’s learning and problem solving processes in concepts of organizational learning, lessons were drawn for researchers and value chain developers. The results underline the importance of process facilitation in a learning value chain to create a social space, in which the actors in the value chain can interact and find a common basis for collaboration. In the learning process, facilitators used an iterative design to consistently align learning activities with the needs of practitioners to ensure practical relevance. To establish new practices and partnerships, value chain actors challenged existing routines and developed new ideas and visions, while at the same time improving established practices within their organizations and along the entire value chain.
To develop measures to reduce the vulnerability of forests to drought, it is necessary to estimate specific water balances in sites and to estimate their development with climate change scenarios. We quantified the water balance of seven forest monitoring sites in northeast Germany for the historical time period 1961–2019, and for climate change projections for the time period 2010–2100. We used the LWF-BROOK90 hydrological model forced with historical data, and bias-adjusted data from two models of the fifth phase of the Coupled Model Intercomparison Project (CMIP5) downscaled with regional climate models under the representative concentration pathways (RCPs) 2.6 and 8.5. Site-specific monitoring data were used to give a realistic model input and to calibrate and validate the model. The results revealed significant trends (evapotranspiration, dry days (actual/potential transpiration < 0.7)) toward drier conditions within the historical time period and demonstrate the extreme conditions of 2018 and 2019. Under RCP8.5, both models simulate an increase in evapotranspiration and dry days. The response of precipitation to climate change is ambiguous, with increasing precipitation with one model. Under RCP2.6, both models do not reveal an increase in drought in 2071–2100 compared to 1990–2019. The current temperature increase fits RCP8.5 simulations, suggesting that this scenario is more realistic than RCP2.6
The floodplain areas along the Naryn River in Kyrgyzstan are essential as they hold the riparian (local) ecosystems because they provide firewood, pastureland, and areas for recreation and protection against erosion. Due to limited access to adequate, reliable, and sustainable energy services, the rural population usually derived their energy needs from multiple natural energy resources (i.e., firewood, charcoal, agricultural residues, animal dung, and wood branches). This is considered a common and predominant practice in rural Kyrgyzstan. This situation leads to a negative impact on local ecosystem services. In addition to that, the reliance on solid fuels contributes to indoor and outdoor air pollution, which is partially threatening the local ecosystem services. By contrast, the employment of renewable-based energy supply systems would substantially reduce the burden on the environment, which is mainly untapped. To integrate renewable energies, it is important to understand the energy behavior of floodplain communities. In that response, the presented article is the first attempt to capture the energy identity of the floodplain community of Kyrgyzstan based on a quantitative energy-based (on-site) household survey. Furthermore, the present research article synthesizes the driving factors that have a (direct or indirect) impact on the energy and local ecosystem services. In addition, the present article proposes a brief pathway for the sustainable energy transition. The article records the recommendation to integrate renewable energies to preserve the local ecosystems of Kyrgyzstan.
Sustainability Transfer as a Concept for Universities in Regional Transformation—A Case Study
(2021)
The research object of this study is the in-depth discourse on the sustainability transfer activities of higher education institutions (HEIs) and their contribution to a regional sustainable transformation. For this purpose, a heuristically-derived concept of sustainability transfer is empirically tested with a mixed-methods approach based on the example of Eberswalde University for Sustainable Development (HNEE). The empirical findings demonstrate that the realization of sustainability transfer depends mainly on the personal initiative of teachers and researchers. Major barriers are a lack of time and financial resources. The observed concept of sustainability transfer is applicable to all study and research areas of HNEE. Involvement in sustainability transfer can include the whole of society, from politics, enterprises, and civil society to education and research institutions. Overall, the empirical testing of the concept offered by this study illustrates its practical suitability to capturing specifically those sustainability transfer activities that are not tapped by third mission approaches. This opens up a novel dimension for transfer potential at universities and their role in regional sustainability transformation. It also highlights that the interdependencies between HEIs and practitioners need to be more contextualized with quality criteria such as the value of the transfer performance or level of ambition.
Background: Over the last 25 years, the prominent forest certification system established by the Forest Stewardship Council (FSC) has used by many companies worldwide for claiming responsible forest management. The objectives of the Russian National FSC standard to decrease the size of clearcuts and the retention of forest elements such as residual seed trees need on-site validation to proof the effectiveness of FSC. To assess the ecological impacts of harvesting practices and benefits of FSC certification, we geospatially compared logging activities with and without FSC certification. Within a sample area covering approximately 3,000 km 2 in the east of the Russian Arkhangelsk Region, we used available data on tree cover loss and satellite images to assess secondary impacts of clearcuttings
on adjacent remnant forests and to quantify the logging intensity. Additionally, the size and structure as well as the density of skidding trails of ten specific clearcuttings located within the sample area were surveyed using satellite images and in the field observation to delineate the boundaries of clearcuts and forested remnants within the clearcuts.
Results: We found a significant increase of small-scale tree cover loss in the proximity of the clearcuts. Patchy dieback is possibly linked to the scale and intensity of logging in the surroundings. On the investigated clearcuts, FSC failed to reduce the size, to increase the retention of forest remnants including seed trees on logged areas, and to maintain larger tracts of undisturbed ground and soil compared to clearcuts that were logged before they received FSC-certification.
Conclusions: Trees and forest remnants remaining inside an increasingly stressed forest ecosystem matrix may not resist further harvesting-related and climate change-induced stresses and disturbances. Large-scale clearcuttings seem to have negative impacts even in adjacent forests and undermine the ecological effectiveness of FSC certification in the study area. The Russian FSC standard is not clearly setting effective guidelines that induce a change in clearcutting practices in order to reduce ecological risks.
Our study deals with human-wildlife conflicts in the Namibian component of the Kavango-Zambezi Transfrontier Conservation Area (KAZA TFCA). The study reconstructs the historical occurrence of selected mammal species and adopts a socio-ecological approach to assess the impact of human dimensions in the KAZA TFCA. Our results reveal pronounced human–wildlife conflicts with considerable impacts on the livelihoods of communities. Human–wildlife conflict has the potential to become a significant contributor to the failure of the TFCA concept. Conflicts are influenced by a growing human population and large mammal species re-colonising formerly abandoned areas. Mapping the occurrence of selected mammal species over time reveals an interesting picture: although conservation initiatives have led to an increase in the population size of selected species, their occurrence is more restricted than in times of heavily decimated wildlife populations. The increasing restriction of wildlife to protected areas reduces the resilience of the ecosystem. To sustainably manage and conserve wildlife populations, a bigger picture including areas outside of the current borders of KAZA TFCA should be considered. This could support re-connecting ecologically important areas for congested populations to move to and reduces the concentration of wildlife and pressure on the land and people of the region.
Urban green space (UGS) is crucial to the healthy development of urban residents. However, UGS that is accessible can benefit residents to an even greater degree. Based on the two-step floating catchment area model (2SFCA) and the location quotient (LQ), we analyzed the changes from 1999 to 2019 in UGS walking accessibility and equity in built-up areas of Urumqi at different administrative levels, and how UGS policy affects the improvement of accessibility. The results showed that UGS accessibility and equity are not evenly distributed at different administrative levels and UGS categories. Although the overall UGS accessibility and equity has improved with policy implementation, these changes are caused by metro-level UGS construction in urban fringe areas. The improvement in UGS accessibility at the neighborhood level in densely populated areas is neglected, which leads to a mismatch between UGS construction and population distribution. In addition, the accessibility of UGS is also limited by geographical location, population density, road distribution, and water shortage in arid metropolitan Urumqi. Our research results provide a theoretical basis for Urumqi and other cities in the optimization of UGS structure and the realization of social equity.
The study investigates the extent to which sustainability is anchored in university curricula of a federal state (Brandenburg, Germany). (1) It provides a baseline for identifying opportunities for sustainability-related curriculum reform by analyzing study programs, levels and type of degree, level of anchoring, and context within the documents. (2) The case studies included an analysis and quantitative evaluation of 748 curricular documents. (3) A third of the study programs refer to sustainability; to an equal extent in both bachelor’s and master’s programs, and to an above-average extent in the fields of science and engineering. There is a strong commitment to sustainability in 12% of the curricula; however, it is strongly anchored in only 3% of study and examination regulations, and in only 9% of module descriptions. (4) For the first time, we have comprehensive results on sustainability in university curricula of an entire federal state and can discuss potentials for its further integration. The innovative method was developed out of the National Monitoring on Education for Sustainable Development (ESD) and adapted to the federal state level; the analysis of curricula through a wider set of variables is transferrable to other states. (5) The study provides indications for the regional development of universities which is crucial for future regional sustainability transformation.
Higher education institutions (HEIs) are increasingly confronted with societal needs beyond research and teaching. These include sustainable development and technology transfer as well as the practical application of knowledge and ideas. Several HEIs already put sustainable development and transfer into practice. These practitioner–university partnerships comprise a broad range of actors, disciplines, topics, and formats. However, transfer activities that contribute to sustainable development in society still make up only a very small part of HEIs’ activities. In response to calls from society as a whole, HEIs could combine transfer and sustainable development more systematically. In this article, we suggest a concept of transfer for sustainable development. The focus is on sustainability transfer in teaching. We used mixed methods for this conceptual work: exploratory workshops, expert interviews, and a case study of transfer in teaching. One of the results presented in this article is a working definition of sustainability transfer at HEIs. In addition, six characteristics for describing sustainability transfer in its various forms are formulated. This conceptualization makes it possible to analyze the diversity of HEIs’ sustainability transfer activities, it helps to identify and encourage potential transfer actors at HEIs as well as practitioners, and, thus, tap the full potential of sustainability transfer.
The frequency and intensity of drought are expected to increase worldwide in the future. However, it is still unclear how ecosystems respond to drought. Ecosystem water use efficiency (WUE) is an essential ecological index used to measure the global carbon–water cycles, and is defined as the carbon absorbed per unit of water lost by the ecosystem. In this study, we applied gross primary productivity (GPP), evapotranspiration (ET), land surface temperature (LST), and normalized difference vegetation index (NDVI) data to calculate the WUE and drought index (temperature vegetation dryness index (TVDI)), all of which were retrieved from moderate resolution imaging spectroradiometer (MODIS) data. We compared the mean WUE across different vegetation types, drought classifications, and countries. The temporal and spatial changes in WUE and drought were analyzed. The correlation between drought and WUE was calculated and compared across different vegetation types, and the differences in WUE between drought and post-drought periods were compared. The results showed that (1) ecosystems with a low (high) productivity had a high (low) WUE, and the mean ecosystem WUE of Central Asia showed vast differences across various drought levels, countries, and vegetation types. (2) The WUE in Central Asia exhibited an increasing trend from 2000 to 2014, and Central Asia experienced both drought (from 2000 to 2010) and post-drought (from 2011 to 2014) periods. (3) The WUE showed a negative correlation with drought during the drought period, and an obvious drought legacy effect was found, in which severe drought affected the ecosystem WUE over the following two years, while a positive correlation between WUE and drought was found in the post-drought period. (4) A significant increase in ecosystem WUE was found after drought, which revealed that arid ecosystems exhibit high resilience to drought stress. Our results can provide a specific reference for understanding how ecosystems will respond to climate change.
The management and preservation of structures in our built environment are central and challenging tasks for practicing engineers. Within the CEN member states (European Committee for Standardization), the so-called Eurocodes form the basis of the design and verification of the load-bearing capacity of structures. Current Eurocodes do not contain special recommendations for existing structures, meaning that the principles for new structures are applied. This can lead to an incorrect estimation of the load-bearing capacity within the semi-probabilistic safety concept. A central task within the investigation and evaluation of existing structures is the strength grading of the material in situ using non-/semi-destructive technical devices. Studies show the potential of the ultrasonic time-of-flight measurement in combination with visual evaluation for an improved grading. The information on the material from an improved grading technique can be used to update the material parameters as a target variable using a measured reference variable. In this contribution, test data from a partner project (spruce, pine, and oak) are analyzed, applying the stochastic grading model of Pöhlmann and Rackwitz. It can be shown that different grading techniques influence the updated distribution function of the material strength within the grade. The results depend on the timber species. Perspectives to develop updated models dependent on the knowledge available are shown and discussed.
The springback effect in molded wood laminations within the elastic range has, to date, not yet been mathematically described. Once cured, residual internal stresses within the laminations cause the final form to deviate from that of the die. Test pieces of beech laminations of 1 mm, 2 mm and 4 mm thicknesses and stack sizes of between 2 and 16 laminations were used. The elasticity value of each stack was obtained using non-glued laminations in a three-point bending test within the elastic region. The laminations were glued with polyurethane resin and mounted in a radius form die. The stress induced by the die onto the stack is within the elastic region of the material without any prior chemical or physical plasticisation of the wood. After curing was complete and the laminations removed from the die, the actual radius was calculated using a circular equation within the CAD program, using three measurement points taken from the stack. The radius of the die within the limits of this study has a negligible effect when predicting the springback of the stack. The exponential correlation between springback and the number of laminations, was used to calculate the springback effect on molded laminated stacks.
The reestablishment of agroforestry systems in Central Asia, combining crop production with protective tree shelterbelts, provides significant potential to improve farming systems. This includes increasing crop yields, additional income from timber, as well as reducing soil degradation and wind erosion. Thus, adopting shelterbelts as a form of pro-environmental behavior provides a number of socio-economic benefits, although some trade-offs need to be considered as well. This paper investigates factors that shape the perception of—and attitude towards—the establishment of tree shelterbelts by farmers in two case study regions in Kyrgyzstan. Applying a conceptual framework distinguishing between extrinsic and intrinsic factors, research methods included semi-structured interviews with farmers and local policy makers. The results show spatial differences in the perception of shelterbelts, both on the regional and on the village scale. In general, shelterbelts were negatively perceived by more than half of the farmers. The main concern raised by farmers was the shading of crops by shelterbelts, resulting in a decrease of yield. In addition, small field sizes and potential conflicts with neighbors were key concerns. Furthermore, rules set by local self-government bodies were inconsistent with the legislative framework, posing significant restrictions to the adoption of sustainable land use practices.
In human geography and beyond, assemblage thinking has increasingly gained attention as a perspective from which to investigate the emergence and dynamics of more-than-human entanglements. Similarly, in the interdisciplinary field of social-ecological systems analysis, theories of complex adaptive systems have been employed to investigate how social and ecological dynamics and actors interact with each other on different scales. Nonetheless, despite the success of these conceptual perspectives in their respective research fields, there have been few attempts so far to bring these theoretical strands together to explore their common ground and investigate how they could cross-fertilize each other. This contribution seeks to address this gap, by investigating the ontological compatibility of these two approaches and exploring the potential for meaningful syntheses that could be utilized for integrative research—combining perspectives, approaches, and methods taken from social and environmental sciences for the analysis of human-environmental relations. Based on a comparative discussion of four selected “guiding principles” found in assemblage thinking and complex adaptive systems, namely, socio-nature, emergence/historicity, relationality, and self-organization, we find not only significant common ground between the two perspectives but also discrepancies that may be utilized for cross-fertilization. In particular, we argue complex adaptive systems would benefit from a deeper engagement with society-nature theorizations found in the assemblage literature, while assemblage thinking could borrow from complex adaptive systems to broaden its conception of how elements relate to and co-function with each other.
We report the results on factors for self-protective behavior against weather extremes such as extreme heat events, drought, and heavy precipitation. Our research draws on the Model of Private Proactive Adaptation to Climate Change (MPPACC). We developed a survey instrument incorporating the main aspects of the MPPACC and other factors from related research work that are assumed to explain why some people show self-protective behavior while others do not. The interview survey was conducted with a non-random sample of 210 respondents from three Philippine cities, namely Baguio, Dagupan, and Tuguegarao. The results reveal the importance of adaptation appraisal, including the perceived feasibility of self-protective measures, the perceived adaptation knowledge, and, with limitations, the perception of actions taken by neighbors or friends. We also show that perceptions of past weather trends are closely linked to risk perception but are only partly corroborated by weather station data. Implications for fostering self-protective behavior are making use of time windows right after an extreme weather event and focusing on enhancing adaptation appraisal.
This article investigates the emergence of female education and its social impacts in a remote and male-dominated mountain community through a case study of Nagar District in northern Pakistan. Drawing on qualitative interviews with 24 women from different educational backgrounds and 15 selected male informants, the study reveals a notable increase in educational opportunities for girls and young women within a relatively short time span, and shows how these changes have affected local perceptions of women's social roles. While there are mixed opinions about the usefulness of education for girls—some find that educated women are better housewives and mothers, while others highlight career opportunities for women—female education has clearly contributed to an increase in self-determination of women. Young women now marry later and have fewer children, parents give their daughters more freedom, and education has contributed to an increase in female mobility and to a more confident and visible role of women in community life. While other aspects of social change also play critical roles, this study shows that female education is one important element in the development of a more equitable society in mountains and elsewhere.
Der Wandel zu einer „bio-basierten“ Wirtschaft, wie er in nationalen und internationalen Bioökonomie-Strategien propagiert wird, kann nur mit tiefgreifenden Veränderungen landwirtschaftlicher Systeme zur Steigerung der Agrarproduktion einhergehen. Besonders in Ländern des Globalen Südens gingen solche Prozesse jedoch meist mit unbeabsichtigten – oder in Kauf genommenen – negativen Konsequenzen wie Umweltdegradation oder die Verschärfung gesellschaftlicher Ungleichheiten einher. Dennoch finden die Kenntnisse über die Risiken bisheriger landwirtschaftlicher Interventionen kaum in politischen Bioökonomie-Strategien Berücksichtigung, die auf wirtschaftlich-technische Lösungen einer „nachhaltigen“ Intensivierung durch agrartechnologische Innovationen auf der einen, und eine Ausweitung von Produktionsflächen auf der anderen Seite setzen. Wie diese Produktionssteigerungen ökologisch und sozial nachhaltig gestaltet werden sollen, bleibt unklar, und bisherige Erfahrungen mit derartigen Interventionen lassen eher das Gegenteil befürchten. Anhand von zwei historischen Beispielen – der Grünen Revolution im Punjab Pakistans und der Neulandkampagne in Kasachstan – skizziert der Beitrag die vielschichtigen sozialen und ökologischen Folgen bisheriger, großangelegter landwirtschaftlicher Interventionen zur Produktionssteigerung und geht der Frage nach, inwiefern diese Erfahrungen (besser) in Bioökonomie-Strategien Berücksichtigung finden (können). Kritische Reflektion sollte dabei vor allem die Rolle institutioneller Pfadabhängigkeiten in der Gestaltung aktueller und zukünftiger Entwicklungen erfahren. Wie bisherige Erfahrungen im Landwirtschaftssektor deutlich machen, müssen Bioökonomie-Strategien ihren geforderten systemischen Ansatz ernst nehmen – was impliziert, dass technologie- und produktivitätsorientierte Ziele stets sozialen und ökologischen Zielen untergeordnet werden müssen.
The paper presents a systemic and participatory assessment approach and scrutinizes how methodological changes necessitated during the Covid-19 pandemic implicated the process and its outcomes. The approach was applied in rural Tajikistan to evaluate changes effected by a development project that promoted the enhancement of biodiversity and ecosystem services in agrarian landscapes. The central building block of the assessment consisted of participatory workshops in 2018 and 2020 with farmers and other stakeholders to develop a systemic knowledge map and to evaluate the promoted strategies based on local expertise. The methodological basis was MARISCO (adaptive MAnagement of vulnerability and RISk at COnservation sites), a holistic and participatory approach to ecosystem-based assessment and management that requires well-trained facilitators. While the activities in 2018 could be implemented as planned, major changes in the work plan were necessary in 2020 due to severe travel restrictions and social distancing rules. Conducting virtual workshops was not possible, as it would have excluded key stakeholders from the process. Instead of conducting a comprehensive assessment workshop guided by two German MARISCO facilitators as originally planned, a series of short and small workshops could be realized. These workshops were facilitated by Tajik scientists after receiving virtual training from their German colleagues. Although it was possible to bring the assessment to a satisfactory conclusion, the methodological changes revealed significant drawbacks. Radical simplifications of the methods were necessary that led to reduced depth of the assessment and missed learning opportunities for participants. Limited experience in workshop guidance by the new facilitators posed challenges to the participatory process and the quality of its outcomes. While the adapted method created training effects that would otherwise have been missed, it also put additional pressure on the capacities of local partners. Our experience during the pandemic offers valuable lessons learned for future applications of systemic-participatory approaches. Whereas, a complete shift to remote applications is problematic, there is a need to put greater emphasis on capacitating local partners. Methodological trade-offs are necessary for partially remote working processes, but principles of participation and systemic thinking should not be compromised.
The China-Pakistan Economic Corridor (CPEC) is a mega-project of primarily infrastructure-related loans and investments in Pakistan. Recently, the official discourse has increasingly shifted to the agricultural sector. For the region of Gilgit-Baltistan bordering China, academic and policy debates highlight the potential boost of fruit exports to China as the most promising opportunity to be leveraged through the CPEC. This paper scrutinizes these promises from a locally grounded perspective, investigating potential benefits and risks for local farmers. To make sense of the complex interplay between external and local actors, interests, markets and (infra)structures, the paper follows an assemblage-inspired approach to map out local trajectories. Contrary to the CPEC narrative, agricultural exports from Gilgit-Baltistan recently came to a halt, due to increasing trade barriers and seemingly competing agricultural developments in neighboring Xinjiang, China. Moreover, the economically most promising local crop for export to China, namely cherries, does not seem too promising for the majority of small farmers. There are other commodities with export potential, but overall, prospects appear to be limited. There is a need for a deeper engagement with the inherent complexities of CPEC trajectories, particularly in regards to local farming contexts in Pakistan and relevant developments in China.
Aufgrund von Rohstoffknappheit auch bei nachwachsenden Rohstoffen kann das Recyceln von Holz und Holzwerkstoffen auch im Möbelsektor nur an vorletzter Stelle, vor der thermischen Verwertung, stehen. Davor gilt es, schon bei der Produktion den Materialeinsatz zu reduzieren bzw. Möbel so zu gestalten, dass eine verlängerte Nutzung möglich ist. Insgesamt muss die Produktnutzung intensiviert werden. Dafür sind unter anderem geeignete Businessmodelle erforderlich. Hiermit beschäftigt sich das Projekt PERMA an der HNEE. Wird Holz dann zum Altholz, muss die Nachnutzungsquote deutlich erhöht werden. Mit der Identifizierung und Indexierung von Altholz befasst sich daher das Kooperations-projekt WIn-Altholz. Sind allerdings Holzspan- und Holzfaserwerkstoffe beschä-digt oder werden nicht mehr benötigt, gibt es bisher keine sinnvollen Nachnut-zungsszenarien. Das Forschungsprojekt „Respan“ will nun ein Recyclingverfahren entwickeln, dass die Nachnutzung möglichst aller Bestandteile der Werkstoffe realisiert.
Im Rahmen der Dokumentation einer systemischen Aufstellung werden die Beziehungen zwischen den Elementen Plattformen und Zertifizierern sowie zwischen Anbietern in der touristischen Wertschöpfungskette und der Intention-Behaviour-Gap visualisiert. Durch die dadurch sichtbar werdenden Bedürfnisse, Risiken und Chancen lassen sich Rahmenbedingungen für gelingende Kooperationen ableiten.
The increasing number of severe storm events is threatening European forests. Besides the primary damages directly caused by storms, there are secondary damages such as bark beetle outbreaks and tertiary damages due to negative effects on the market. These subsequent damages can be minimized if a detailed overview of the affected area and the amount of damaged wood can be obtained quickly and included in the planning of clearance measures. The present work utilizes UAV-orthophotos and an adaptation of the U-Net architecture for the semantic segmentation and localization of windthrown stems. The network was pre-trained with generic datasets, randomly combining stems and background samples in a copy–paste augmentation, and afterwards trained with a specific dataset of a particular windthrow. The models pre-trained with generic datasets containing 10, 50 and 100 augmentations per annotated windthrown stems achieved F1-scores of 73.9% (S1Mod10), 74.3% (S1Mod50) and 75.6% (S1Mod100), outperforming the baseline model (F1-score 72.6%), which was not pre-trained. These results emphasize the applicability of the method to correctly identify windthrown trees and suggest the collection of training samples from other tree species and windthrow areas to improve the ability to generalize. Further enhancements of the network architecture are considered to improve the classification performance and to minimize the calculative costs.
This paper explores how landscape research can contribute to our understanding of why integrated protected area concepts like biosphere reserves get less recognition than national parks. In this regard, we analysed policy documents and online communication of biosphere reserves and national parks, conducted qualitative interviews with conservation professionals and volunteers as well as participant observation in order to identify and compare narratives that guide the communication and perception of both protected area categories. The results show how national parks offer a clear interpretation of space by building on landscape stereotypes and creating landscape legibility and experience-ability through touristification. National Parks also experience conflicts about proper management and combine a variety of goals, often including regional development. Nevertheless, their narrative is unambiguous and powerful. Biosphere reserves, on the other hand, have an image problem that is essentially due to the difficulty of communicating their objectives. They confront the difficult task of creating a vision that combines development and conservation while integrating contrarious landscape stereotypes. We argue for a fundamental engagement with protected area narratives, as this improves understanding of protected areas’ transformative potential.
The complexity of highly structured forests with multiple tree species, especially when coniferous and broadleaved tree species are mixed, as well as stands with extended machine operating trail spacing and inclined terrain, create challenging operational conditions for mechanized timber harvesting and extraction. Motor-manually felling trees within the midfield and bunching them at the machine operating trails, prior to the arrival of a harvester-forwarder system, is a complex operation. The aim of this study was to assess and compare tethered harvester productivities of a thinning operation, for felling and processing standing trees and for processing bunched trees, through a time study in forest stands with 40-m distances between machine operating trails. Total operational costs of the analyzed thinning operation were 69 €/m3o.b., including extraction using a multiple forwarder approach. Tree species, merchantable timber volume, and whether the trees were standing or presented as bunched logs all had a significant effect on the harvester time consumption. Moreover, harvester positioning time was significantly shorter when trees were already bunched at the machine operating trail. While the productivity of standing or bunched spruce trees did not differ significantly between the cases (approximately 18 m3o.b./productive machine hours excluding all delays (PMH0)), the productivity of standing broadleaved tree species (8.3 m3o.b./PMH0) was much lower than that of bunched trees (15.5 m3o.b./PMH0). Thus, the described timber harvesting and extraction system may be a valuable option for forest stands with high proportion of broadleaved trees.
The accurate estimation of timber volume is of the utmost importance. For industrial timber, the volume is often estimated as stacked cubic meters. In addition to manual measurements, volume estimation is possible with photo-optical systems. Over 100 piles of industrial timber of broadleaved tree species were analyzed. In the study, a standard manual measurement method for the estimation of wood pile volumes was compared with a smartphone based photo-optical application for the determination of woodpile volume. Mean gross volume of the piles was approximately 56 m3 and mean width of piles was 9.43 m. A strong correlation was found between the manual measurements and the photo-optical measurement. However, volume estimation of large volume piles seems to perform better in comparison to piles with small volumes. Further research is needed to determine the effects of variables such as log quality or quality of pile on volume estimation accuracy.
In terms of assessing economic impact, one of the most important elements in the wood supply chain is the measurement of round wood. Besides the one-by-one measurement of logs, logs are often measured when stacked at the forest road. The gross stacked volume includes the volume of the wood, bark and airspace and is widely used for industrial wood assortments. The increasing international attention given to photo-optical measurement systems for portable devices is due to
their simplicity of use and efficiency. The aim of this study was to compare the gross volumes of
hardwood log stacks measured using one widespread photo-optical app with two manual section-wise volume estimations of log stacks based on the German framework agreement for timber trade (RVR). The manual volume estimations were done starting from the left (RVRleft) and right (RVRright) sides of the log stacks. The results showed an average deviation of the photo-optical gross volume estimation in comparison to the manual estimation of –2.09% (RVRleft) and –3.66% (RVRright) while the deviation between RVRleft and RVRright was +2.54%. However, the log stack
gross volume had a highly significant effect on the deviation and better accuracy with smaller
deviation were reached for larger log stacks. Moreover, results indicated that the gross volume estimations of higher quality log stacks were closer for the three analyzed methods compared to estimations of poor-quality log stacks.
1. Forest management influences a variety of ecosystem structures and processes relevant to meso- and microclimatic regulation, but little research has been done on how forest management can mitigate the negative effects of climate change on forest ecosystems.
2. We studied the temperature regulation capacity during the two Central European extreme summers in 2018 and 2019 in Scots pine plantations and European beech forests with different management-related structural characteristics.
3. We found that the maximum temperature was higher when more trees were cut and canopy was more open. Logging 100 trees per hectare increased maximum temperature by 0.21–0.34 K at ground level and by 0.09–0.17 K in 1.3 m above ground. Opening the forest canopy by 10% significantly increased Tmax, measured 1.3 m above ground by 0.46 K (including pine and beech stands) and 0.35 K (only pine stands). At ground level, Tmax increased by 0.53 K for the model including pine and beech stands and by 0.41 K in pure pine stands. Relative temperature cooling capacity decreased with increasing wood harvest activities, with below average values in 2018 (and 2019) when more than 656 (and 867) trees per hectare were felled. In the pine forests studied, the relative temperature buffering capacity 1.3 m above ground was lower than average values for all sample plots when canopy cover was below 82%. In both study years, mean maximum temperature measured at ground level and in 1.3 m was highest in a pine-dominated sample plots with relatively low stand volume (177 m3 ha−1) and 9 K lower in a sample plot with relatively high stock volumes of Fagus sylvatica (>565 m3 ha−1). During the hottest day in 2019, the difference in temperature peaks was more than 13 K for pine-dominated sample plots with relatively dense (72%) and low (46%) canopy cover.
4. Structural forest characteristics influenced by forest management significantly affect microclimatic conditions and therefore ecosystem vulnerability to climate change. We advocate keeping the canopy as dense as possible (at least 80%) by maintaining sufficient overgrowth and by supporting deciduous trees that provide effective shade.
Comparison of different approaches to estimate bark volume of industrial wood at disc and log scale
(2021)
Within the wood supply chain, the measurement of roundwood plays a key role due to its high economic impact. While wood industry mainly processes the solid wood, the bark mostly remains as an industrial by-product. In Central Europe, it is common that the wood is sold over bark but that the price is calculated on a timber volume under bark. However, logs are often measured as stacks and, thus, the volume includes not only the solid wood content but also the bark portion. Mostly, the deduction factors used to estimate the solid wood content are based on bark thickness. The aim of this study was to compare the estimation of bark volume from scaling formulae with the real bark volume, obtained by xylometric technique. Moreover, the measurements were performed using logs under practice conditions and using discs under laboratory conditions. The mean bark volume was 6.9 dm3 and 26.4 cm3 for the Norway spruce logs and the Scots pine discs respectively. Whereas the results showed good performances regarding the root mean square error, the coefficient of determination (R2) and the mean absolute error for the volume estimation of the total volume of discs and logs (over bark), the performances were much lower for the bark volume estimations only.
Bark characteristics are not only used in the forest-wood supply chain, for example to calculate standing volumes, but also to transform wood volumes and masses. In this study, bark thickness, bark volume and bark mass were analyzed on the basis of 150 Scots pine discs, with a mean diameter of 13 cm. The mean double bark thickness was 3.02 mm, the mean bark volume proportion was 5.6% and mean bark mass proportion was 3.3%. Bark proportions were significantly affected by the log-specific variables ‘diameter over bark’, ‘proportion of bark damage’ and ‘double bark thickness’.
Social-space–time-behaviour has developed very differently (e.g. a, loner, a herd, a pack) in the animal kingdom and depends on many different factors, like food availability, competition, predator avoidance or disturbances. It is known, that red deer are differently distributed in human disturbed areas compared to areas with less anthropogenic influences. But knowledge about the potential influence of human presence on social associations and interactions is rare, albeit differences may result in changing impacts on the environment, such as habitat utilization and feeding damage. Therefore, we investigated differences in the space use and social association of red deer. We studied two radio-collared herds of non-migratory populations in two study areas, which were comparable in landscape structure and vegetation structure, but differed in accessibility for visitors and the extent of their presence. Between the two study sites we compared the home range size, the differences in the extent of home range overlap within each study site and the space–time association (Jacobs Index) of individuals. Additionally, we present data on seasonal variations of home range sizes and social association all year round. In order to compare human activity in the study sites, we used the data from our long-term camera trap monitoring. The herd in the area with more human activity had significantly smaller home ranges and had greater year-round social associations in almost all seasons, except summer. We assume that smaller home ranges and higher association between animals may result in a higher feeding pressure on plants and a patchier utilization in areas with higher disturbances.
Several laboratory studies and experiments have demonstrated the usability of polymer films filled with electrically conductive filler as piezoresistive material. Applied to adhesives, the glue lines of wood products can achieve multifunctional—thus bonding and piezoresistive/strain sensing—properties. Based on critical load areas in timber constructions, upscaled test setups for simplified load situations were designed, especially with regard to a stress-free electrical contact. In a second step, another upscaling was done to small glulam beams. Based on an experimental test sequence, the piezoresistive reactions as well as the behaviour until failure were analysed. The results show in all cases that a piezoresistive reaction of the multifunctionally bonded specimens was measurable, giving a difference in the extent of relative change. Additionally, measured phenomena like inverse piezoresistive reactions, electrical resistance drift and the absence of a piezoresistive reaction were discussed, based on additional strain analysis by digital image correlation. A model of macroscopic and microscopic strains influencing the piezoresistive reaction of the electrically conductive bond line in wood was used to explain all experimental results. Finally, a first scale-up of piezoresistive bond lines from laboratory samples to glulam beams was possible and successful.
Various studies on wood adhesives filled with conductive fillers for future application to structural monitoring showed a piezoresistive (resistance change with strain) response of the adhesive bond lines that is measurable under direct current. The results also showed a relatively high signal noise with low sensitivity. Using impedance spectroscopy as a measurement technique, the improvements in frequency-dependent piezoresistivity over DC (Direct Current) resistography of multifunctional bonded wood were studied. Beech specimens were bonded by one-component polyurethane prepolymer (1C-PUR) filled with carbon black and tested under shear load. The quality of the piezoresistive properties was described by calculating the signal-to-noise ratio (SNR) of the measured signal. A setup-specific frequency band with optimized SNR between 100 kHz and 1 MHz could be derived from the measurements. Several frequencies showed a signal with higher quality resulting in a higher SNR. Regardless of the variations in impedance spectra for all specimens, this frequency band provided several frequencies with improved signal quality. These frequencies give a more reliable signal with lower noise compared to the signal from DC resistography.
Synchrotron-radiation-based microtomography enables the 3D analysis of biological samples in situ beyond simple visualization, providing accurate measurements and recording of temporal data. The microtomography end station at P05 (PETRA III, Hamburg, Germany), operated by the Helmholtz Zentrum Hereon, can accommodate complex sample environments such as a load frame for mechanical testing. Herein, the strain analysis of a volumetric time series dataset of small hardwood samples is presented. For this in situ mechanical testing, the load frame is operated in tensile mode, and the biogenic material samples are subdivided into those specialized for tensile forces and those of regular anatomical structure. Digital volume correlation analysis allows for the prediction of strain development at any position in the sample. The tissue specialized for tensile strength can align dislocations formed under tension such that the deformation is stronger and more ordered. The results show how high-resolution imaging of sequential loading and the subsequent localization of strain can reveal functional morphological relationships. These methods can be extended to other biological materials and may prove to be extremely relevant for the analyses of fibrous and/or layered composite materials.