TY - THES A1 - Marwaha, Pritish T1 - Lean, Six Sigma and change management BT - a process improvement approach N2 - This thesis revolves around the process improvement approach combining the three methodologies: Lean, Six Sigma, and Change Management. the DMAIC methodology of Six Sigma is the focus of the process improvement approach and gives a statistical idea of a near-perfect process that is needed in all the industrial sectors in this era of globalization. To enhance this process approach, Lean has been studied in combination with Six Sigma to define current trends and patterns used by Organizations all over the world. Last and a very important approach: Change Management or managing the people side of the change has been studied and combined with Lean and Six Sigma to justify the problem statement followed by a qualitative and quantitative analysis to provide the reader with an in-depth understanding of this process improvement approach which not only uncovers the process side of an approach but also studies the people side as well as considers potential threats to failure of Six Sigma projects, which have been evident in the past. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35346 CY - Ingolstadt ER - TY - THES A1 - Ijaduade, Ephrem Adesina T1 - Analysis of digital marketing tools with regard to their effectiveness for brand building N2 - This study is carried out to know the most effective tools which are important in digital marketing and how they affect brand building. From the research conducted, it shows different kinds of tools used in digital marketing and how they affect the values of brands and stating which kinds of tools are more effective in brand building. The research was conducted using different researching tools such as books, published journals and articles, and some library resources which aided the research work effectively, the main idea behind the research work is to give different sides of opinion to the research work. A case study was conducted to back up the primary research and literature review by analysing two different companies such as Amazon and Nike. It examined the different kinds of digital marketing tools used by both companies to improve and advance their businesses and brand image. This will also enable different companies on which tool to invest more and which tools they might need to make a lesser investment on. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35207 CY - Ingolstadt ER - TY - THES A1 - Begisholli, Ardian T1 - Analyse von Erfolgsfaktoren digitaler Start-ups auf Basis des Business Model Canvas N2 - Digitale Start-ups treten in der heutigen Zeit immer häufiger auf, weswegen sich die Forschung damit beschäftigt, dieses Teilgebiet zu definieren und deren Erscheinungsformen zu verstehen. Obwohl das Business Model Canvas häufig zur Nutzung von Start-ups verwendet wird, wurde bezüglich der Einflüsse von den genaueren Geschäftssegmenten auf den Erfolg wenig Aussagen getroffen. Diese Arbeit beschäftigt sich mit der Analyse des einzelnen Auftretens und die Verflechtung von Erfolgsfaktoren in dem Business Model Canvas. Dabei wurde eine systematische Literaturrecherche verwendet, um die einzelnen Geschäftssegmente zu beschreiben. Es zeigt sich, dass der Erfolg in den Teilsegmenten verstärkt durch digitale Dienstleistungen, Kunden und den Potenzialen der Technologie beeinflusst werden. Gesamtbetrachtet bilden sich Muster, bei denen Kunden am ganzen Prozess eingebunden, digitale Dienstleistungen abgewogen genutzt und die Technologie agil und iterativ perfektioniert wird. Es wird interpretiert, dass solche Faktoren auftreten, um die Vielfältigkeit der technologischen Möglichkeiten zu bewältigen. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35485 CY - Ingolstadt ER - TY - THES A1 - Quiroz Alvarado, Luis Jose Edgardo T1 - Environmental impact and circular economy characteristics of additive manufacturing in comparison to traditional production procedures Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35566 CY - Ingolstadt ER - TY - THES A1 - Oflaz, Zübeyir T1 - Comparison of uncertainty quantification methods in deep learning with respect to computation resource limited applications N2 - The ability of deep learning methods to create models that can recognize complex patterns with a relatively small amount of effort quickly led to their adoption in many real-world applications. However, the inability of these models to provide accurate uncertainty estimation regarding their results has hampered the many possible use cases for these models, and quantifying the uncertainty of their predictions has received many possible solutions from the academic world. This thesis investigated two such methods, namely Laplace Approximation and Multi Input Multi Output (MIMO) ensemble, in their ability to provide meaningful uncertainty estimation and create accurate predictions with near certain confidence under resource limitations. During this investigation, MIMO models have consistently outperformed the models with Laplace Approximation but have proven to be much harder to get a viable working model. Because of this, the ease of application for the Laplace Approximation method was still found to be an appealing solution when practicality is a serious concern. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35501 CY - Ingolstadt ER - TY - THES A1 - Oswald, Elias Michael T1 - Sinnvolle Anwendung von künstlicher Intelligenz mit der Technik des maschinellen Lernens für den Einsatz eines Industrieroboters in der Bandmontage der Automobilindustrie N2 - In der Arbeit geht es um einen Industrieroboter welcher mittels künstlicher Intelligenz mit der Technik des maschinellen Lernens in die Bandmontage einer Automobilindustrie integriert wird Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35661 CY - Ingolstadt ER - TY - THES A1 - Kriegl, Corina T1 - Technoökonomische Auswirkungen von Eigenstromoptimierung auf das Flexibilitätspotential im Haushaltssektor Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35733 CY - Ingolstadt ER - TY - THES A1 - Freund, Iuliia T1 - Integration of foreign people in the German workplace focusing on displaced Ukrainians N2 - Germany is a country with a positive migration balance. Hundreds of thousands of immigrants come to Germany every year and far fewer leave. The question of how to integrate foreign people is raised in connection with the outbreak of war throughout Ukraine, which caused a new wave of refugees to flow to Europe. The integration of displaced people into the labour market is the central issue for the government in Germany to ensure a functioning, cohesive society in which all members contribute and benefit. This study aims to find the best integration practice that companies use to integrate foreign people into the workspace. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35619 CY - Ingolstadt ER - TY - THES A1 - Siemermann, Jan Erik T1 - Entwicklung einer Wechselwirkungsanalyse zur Untersuchung verschiedener Ansätze zur Reduktion des Primärmaterialbedarfs und der CO2-Emissionen für Traktionsbatterien Y1 - 2023 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-36595 CY - Ingolstadt ER - TY - THES A1 - Stoykov, Georgi T1 - Fixed income securities BT - investing and trading approach N2 - Based on a review of the literature of fixed income securities and professional experience, the most important driving factors of fixed income securities were presented and then these factors were used to form strategies and techniques for investing and trading. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-38446 CY - Ingolstadt ER - TY - THES A1 - Attakora Duah, Otis T1 - The assessment of technology and company readiness for robotic process automation (RPA) implementation in retail N2 - This dissertation investigates the impact generated by the automation of processes with the use of robots in areas of BackOffice in companies of commercial distribution in the retail industry. This work focuses on the study of three main pillars of this impact: Firstly The transformation of the BackOffice Processes; Secondly, In RPA technology with a descriptive analysis of its main functionalities. Thirdly In the challenge of a correct implementation of RPA through the correct use of its resources and processes. In detail, it will analyze how the adoption of RPA in some processes allows organizations to process larger volumes of detain in less time while improv- ing the level of analysis of the information. Y1 - 2023 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-39579 CY - Ingolstadt ER - TY - THES A1 - Tunç, Irmak Alara T1 - Planung von Produktionsprozessen mit Virtual Reality N2 - In der industriellen Produktion findet eine Transformation statt von papierbasierten und analogen Abläufen hin zu digitalen Tools und Werkzeugen. Generelles Ziel ist durch Visualisierung der realen (physischen) Welt Optimierungsbedarfe mit geringem Aufwand festzustellen bzw. neue Systematiken zu entwickeln. Dies hat den Vorteil, dass z.B. in Planungsprozessen die Arbeitsabläufe viel früher als bisher gestaltet und visualisiert, sowie Fehler frühzeitig entdeckt werden können. Jedoch ist die digitale Transformation auch herausfordernd, da neue Methoden und Daten in den Unternehmen implementiert und verwendet werden müssen. Planungsfehler werden bei der Planung von Abläufen häufig erst im Betrieb erkannt, welches somit einen hohen Grad an Verschwendung verursacht. Um Restriktionen zu minimieren und einen nahezu reibungslosen Ablauf in der Planung sowie in der Umsetzung von Produktionsprozessen sicherzustellen, wird die VR-Technik angewandt. Durch die virtuelle Realität kann ein idealer Ablauf unter Berücksichtigung aller Parameter abgebildet werden. Ziel der Arbeit ist eine in Betrieb genommene VR-Planungssoftware Halocline im Produktionstechnik-Labor. Die Inbetriebnahme umfasst die Funktionserprobung und Einrichtung mit Hilfe eines anwendungsorientierten beispielhaften Bauteils, Arbeitsablauf und Arbeitsplatz im Planungsprozess. Hiermit soll später das grundsätzliche Kennenlernen der Halocline Software für neue Benutzer möglich sein. Y1 - 2023 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-39403 CY - Ingolstadt ER - TY - THES A1 - Oliveira Barreira Filho, Ricardo T1 - A data-driven approach for fleet allocation in logistics operations Y1 - 2023 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-39427 CY - Ingolstadt ER - TY - THES A1 - Nuñez Franco, Luis Fernando T1 - On sentiment analysis of Twitter content related to the FIFA World CUP 2022 in Qatar N2 - The decision to award the 2022 World Cup to Qatar has been met with widespread controversy, criticism, and opposition from fans and the football community. There have been numerous allegations of bribery and corruption within FIFA, as well as reports of human rights abuses, including poor conditions for migrant workers, restrictions on women's rights, and discrimination against the LGBTQ+ community. Furthermore, the intense heat in Qatar and the decision to move the tournament to a different time of year has had significant financial impacts on professional football leagues and related businesses. Public opinion has become strongly polarized due to these issues, which is why in this thesis, a pre-trained model using Python programming language is utilized to analyze the Twitter sentiment towards the 2022 football World Cup. Y1 - 2023 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-33627 CY - Ingolstadt ER - TY - THES A1 - Ahmed, Awais T1 - Identification of driving patterns at roundabouts N2 - Increased traffic demand due to urbanization is leading to more complex intersections such as roundabouts. The driving behaviours and patterns at these intersections must be understood to support the smart infrastructure in making the future of automated traffic safe and efficient. The ability of machine learning (ML) methods to create models that recognize complex patterns from large amounts of data with a relatively small amount of effort quickly led to their adoption in many real-world applications. This study analyzes large amounts of unlabelled trajectory data using ML and clustering techniques to identify functional patterns. After discussing the methods in the literature, K means, Fuzzy c-means and Affinity Propagation are chosen to extract information from the rounD dataset, a large-scale dataset recorded on three different roundabouts in Germany. The thesis concludes that the spatial properties of a vehicle are a good predictor of the possible future exit on a roundabout. Furthermore, the velocity profiles of the cars taking the same exit are very similar, while the velocity profiles of cars taking different exits are unique. Hence the velocity of a car is also a good predictor of the future behaviour of a car. Y1 - 2023 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-33581 CY - Ingolstadt ER - TY - THES A1 - Ertl, Tamara T1 - Kombination von prädiktiven und präskriptiven Methoden zur Lösung des Vehicle Routing Problems in der Entsorgungslogistik N2 - Mit hybriden Machine Learning Modellen wurde sich in den letzten Jahren intensiv befasst. Sie dienen zur Lösung von kombinatorischen Optimierungsproblemen und haben jeweils verschiedene Zielstellungen. In dieser Bachelorarbeit wird ein solches Hybridmodell mit einer Kombination aus Prädiktion und Präskription geschaffen, mit der Zielsetzung der Lösung des Vehicle Routing Problems in der Entsorgungslogistik. Effiziente und ressourcenschonende Tourenplanung trägt damit zur Optimierung des Verkehrs und zur langfristigen Sicherstellung der Energieversorgung bei. Insbesondere werden Ansätze unter den Begriffen Predict-then-Optimize und Predict-and-Optimize kritisch betrachtet und hinsichtlich ihrer Potenziale untersucht. Um die Zielsetzung zu erreichen, erfolgt die Definition und das Training eines eigenen Neuronalen Netzes, welches wiederum zur Vorhersage in das kombinatorische Optimierungsmodell eingebettet wird. Im Fokus steht die Minimierung der Gesamttourendauer unter gegebenen kapazitativen, zeitlichen und flottenmäßigen Beschränkungen. Es wird ein zeitlich abhängiger Parameter durch Vorhersage aus einer Entscheidungsvariablen aus dem Optimierungsmodell belegt. Die Kodierung erfolgt in einer Verbindung aus der Programmiersprache Python und der Modellierungssprache MiniZinc aus dem Bereich Constraint Programming. Im Rahmen eines Experiments werden der eigene Hybridansatz in Form des eingebetteten Machine Learning Modells und ein klassischer 2-stufiger Ansatz gegenübergestellt. Im 2-Phasen Vorgehen wird ein Durchschnittswert für den Parameter ermittelt und dieser statisch im Optimierungsmodell verwendet. Der Vergleich zeigt, dass das eingebettete Machine Learning Modell zu einer 12 Minuten kürzeren Gesamttourendauer kommt und damit ein um 13 Prozent besseres Optimierungspotenzial bietet. Folglich ist der in dieser Arbeit präsentierte Hybridansatz als dem statischen Modell überlegen zu klassifizieren. Mit der dynamischen Kombination aus Prädiktion und Präskription werden bessere Optimierungsergebnisse erzielt. Weiterführende Arbeit könnte sich mit der Vorhersage mehrerer Parameter beschäftigen und als Zielsetzung weitere Faktoren neben der Tourendauer berücksichtigen. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-34937 CY - Ingolstadt ER - TY - THES A1 - Stoyanova, Nikol Marinova T1 - Innovationskultur BT - theoretische Ansätze und Umsetzung in der Praxis N2 - Diese Bachelorarbeit beschäftigt sich mit der Frage, wie eine Innovationskultur in einem Unternehmen geschaffen werden kann. Zielsetzung dieser Arbeit ist es, einen Vergleich der Innovationskultur in der Theorie und Praxis durchzuführen. Zu Beginn der Arbeit wird ein Überblick über die theoretischen Ansätze gegeben, wobei das Vier-Ebenen-Modell der Innovationskultur nach Meyer als Grundlage herangezogen und durch weitere Erkenntnisse aus der Literatur ergänzt wird. Im empirischen Teil wird weiterhin die Innovationskultur von drei Unternehmen anhand der Fallstudienmethode analysiert und mit den Ergebnissen aus der Theorie verglichen. Mithilfe der Literaturanalyse und der Auswertung der Fallstudien war es möglich, Erkenntnisse zu gewinnen und Schlussfolgerungen zu ziehen, die für die Schaffung einer Innovationskultur wichtig sind. Letztendlich ließ sich klar feststellen, dass die theoretischen Ansätze erfolgreich in der Praxis angewendet werden. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-34973 CY - Ingolstadt ER - TY - THES A1 - Schneider, Andreas Sebastian T1 - Analyse der arbeitsorganisatorischen Veränderung durch den Einfluss von Digitalisierung N2 - Die Digitalisierung geht mit tiefgreifenden Veränderungen für viele Unternehmen einher. Grundlegende Strukturen und Geschäftsprozesse sämtlicher Unternehmensbereiche werden durch Anwendungen aus der Industrie 4.0 stark beeinflusst. Cloud Computing, automatisierte Vorgänge, oder das Internet der Dinge verändern möglicherweise die Arbeitsorganisation in der Produktion. Dabei werden Tätigkeiten vermutlich verändert, durch Assistenzsysteme unterstützt, aufgewertet oder flexibilisiert. Dies stellt vermutlich andere Anforderungen an die Beschäftigten, die den neuen Arbeitsbedingungen gerecht werden sollen. Mitarbeiter müssen sich dabei möglicherweise durch neue fachliche und personale Kompetenzen auszeichnen. Somit spielen wahrscheinlich manuelle oder einfache kognitive Fähigkeiten in den kommenden Jahren nur mehr eine untergeordnete Rolle bei der Arbeit. Höhere kognitive, soziale und technologische Fähigkeiten gewinnen dagegen an Bedeutung. Mitarbeiter müssen zudem möglicherweise personale Kompetenzen wie Flexibilität und Anpassungsfähigkeit, Motivation und Selbstwirksamkeit beim Erledigen ihrer Aufgaben mitbringen. Zur Realisierung einer erfolgreichen Transformation und zur Anpassung des Unternehmens an die veränderte Arbeitsorganisation, könnte Change Management nötig sein. Dabei spielen externe und interne Rahmenbedingungen, wie Staat, Unternehmensorganisation und -kultur eine wichtige Rolle. Die Implementierung des Digitalisierungsgedankens könnte hierbei durch Mitarbeiterorientierung, eine vertrauensbasierte Führung, Kommunikation und Transparenz realisiert werden. Um die Beschäftigten auf ihre zukünftigen Tätigkeiten vorzubereiten und diese für neue Arbeitsbedingungen zu gewinnen, sind möglicherweise die Personalentwicklung und die Mitarbeitermotivation weitere erfolgskritische Punkte im Change Management. Dabei können verschiedene Verfahren helfen, die Fähigkeiten der Mitarbeiter zu beurteilen und Kompetenzlücken zu identifizieren. Im Anschluss könnten Entwicklungsmaßnahmen festgesetzt werden, welche die Beschäftigten auf die veränderten Umstände vorbereiten. Führungskräfte müssten zusätzlich versuchen die Mitarbeiter über die Vorteile von digitalen Technologien aufzuklären und diese für eine Transformation zu begeistern. Die Vorgehensweise beim Change Management zur Bewältigung dieser Herausforderungen könnte sich dabei am Haus der Arbeitsfähigkeit orientieren. Y1 - 2021 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-32744 CY - Ingolstadt ER - TY - THES A1 - Saglam, Melike T1 - Analyse der Relevanz der 55 generischen Geschäftsmodelle in der Automobilindustrie N2 - Durch die rasanten Marktänderungen und die steigenden Wettbewerbsintensitäten sind Automobilunternehmen dazu verpflichtet, sich von ihren Konkurrenten abzuheben. Die Fokussierung auf Produktinnovationen ist in der aktuellen Zeit ungenügend. Für einen besseren Erfolg müssen die Geschäftsmodelle langfristig weiter revolutioniert werden, um weiterhin konkurrenzfähig zu bleiben. Um den politischen, rechtlichen und den Kundenanforderungen gerecht zu werden, ist die Automobilindustrie gezwungen, den aktuellen Trends nachzugehen. Daher ist es wichtig, die aktuellen Geschäftsmodelle zu hinterfragen und dementsprechend entweder eine Geschäftsmodellinnovation mit Hilfe des „Business Model Canvas“ zu entwickeln oder ein vorhandenes Geschäftsmodell weiter auszubauen. Hiermit können neue Herausforderungen bewältigt werden. Die Relevanz dieser Arbeit soll die Wichtigkeit der 55 Geschäftsmodellinnovationen und die aktuellen sowie die zukünftigen Trends der Automobilindustrie aufzeigen. Dies ist signifikant, damit die Unternehmen langfristig auf dem Markt bestehen können und konkurrenzfähig sind. Y1 - 2021 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-32761 CY - Ingolstadt ER - TY - THES A1 - Baquero Artiga, Alvaro Antonio T1 - Analysis, formalisation and improvement of aircraft ground equipment development using a model based systems engineering approach. N2 - Developing complex systems requires processes able to adapt to the increasing systems complexity level. The Aircraft ground equipment (AGE) development process is based on a systems engineering approach, well known for its versatility and flexibility. Determining if there is any improvement potential by introducing a model based systems engineering approach is key for establishing the scope of the thesis. Model based systems engineering (MBSE) is a formalised approach which supports the implementation of systems engineering activities. It serves to develop and integrate complex systems in an effective and efficient form. Systems engineering is the currently in use approach. However, there is an apparent lack of process formalisation and standardisation. The main objectives of this thesis are the process analysis, the formalisation of processes and the introduction of modelling approaches as part of an improvement proposal. The development process has been analysed to determine the improvement potential. There is no standard approach for analysing a process. Therefore, a process overview has been prepared to obtain an expert’s opinion. The results concluded in the recommendation of introducing a new process step. This should assist in reviewing the system’s purpose and serve as a base for modelling, system drafting and all the remaining development steps. The proposal validation and evaluation suggest that the proposed improvements will deliver a notable process improvement. This should be responsible for improved system quality, error reduction and process formalisation. Implementing modelling standards will set the foundations for future modelling and process automation. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35015 CY - Ingolstadt ER - TY - THES A1 - Muñoz Nuñez, Vicent T1 - Comprehensive survey on the existing deep learning models in CAD data processing. N2 - In the recent years, many fields have benefited from the development of geometric deep learning architectures. From chemistry to traffic forecasting through virtual reality. One of such applications is in design and manufacturing of physical products. Since geometric deep learning is developed to work with non-Euclidean data, it makes for a synergistic relation with the fore mentioned field. Different methods and algorithms have already been tried to merge CAD and geometric deep learning. In this paper, the goal is to provide a comprehensive survey on how the CAD data has been used when related to geometric deep learning. First, the state of the art is introduced. Next, the data types, models and architectures that define how geometric deep learning and CAD interact are introduced and discussed, along the datasets used for training the algorithms. Then, a section to review different options within the established frame is introduced. At last, there is space for a discussion reviewing the information and discussing how the field should develop in the future. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-34999 CY - Ingolstadt ER - TY - THES A1 - Schatz, Katja T1 - Konzepterarbeitung zur Auslegung von PV-Anlagen mit Energiespeicher hinsichtlich des Nutzungs- und Mobilitätsverhaltens N2 - Konzepterarbeitung zur Auslegung von PV-Anlagen mit Energiespeicher hinsichtlich des Nutzungs- und Mobilitätsverhaltens Bei Ein- und Mehrfamilienhäusern unterliegt die optimale Nutzung der durch PV-Anlagen gelieferten Energie zwei wesentlichen Einflüssen. Zum einen dem zeitlichen Auftreten des Energiebedarfes und zum anderen der Fähigkeit überschüssige Energie zu speichern. In dieser Bachelorarbeit werden Faktoren, welche Energiebedarf, Nutzungszeit und Speicherung beeinflussen, bestimmt und hinsichtlich ihrer Kostenauswirkung untersucht. Des Weiteren wird ein Konzept zur Auswertung verschiedener Nutzungsprofile erstellt und mittels Energiebilanzierung erarbeitet, welche Verbesserungspotentiale bezüglich Speichergröße und Nutzungsverhalten bestehen. Aus diesem Konzept wird mit MS-Excel und „Visual Basic for Application“ ein Berechnungswerkzeug entworfen und programmiert, sowie eine Benutzeroberfläche zur Eingabe von Gebäude- und Nutzungsdaten erstellt. Im Anschluss wird das Konzept anhand von Historiendaten einer bestehenden Musteranlage verifiziert. Abschließend werden mit Hilfe des Werkzeuges vordefinierte Nutzungsprofile hinsichtlich Optimierung von Energienutzung und Wirtschaftlichkeit untersucht. Durch Variationen der Speichergröße und des Mobilitätsverhaltens werden Einsparpotentiale bei Netzbezug- und Kraftstoffkosten ermittelt. Es zeigt sich, dass für verschiedene Ausgangssituationen individuelle Verbesserungsmöglichkeiten existieren. Y1 - 2021 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-33329 CY - Ingolstadt ER - TY - THES A1 - Kolios, Alexandros T1 - Global delivery in automotive software testing between Germany and Malaysia BT - improving operations through strategic management N2 - Improving the current automotive testing operations of the Global Delivery Centre of EDAG in Kuala Lumpur, Malaysia through utilising a strategic management framework in order to identify and solve problems. Y1 - 2023 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-36211 CY - Ingolstadt ER - TY - THES A1 - Liubcenco, Rostislav T1 - Application of DeFi for exchanges and loans BT - Risks and possibilities N2 - Thesis provides an insight in overall procedures of functioning of the DeFi protocols for operations of exchanges and taking loans in cryptocurrencies; aligned with transaction costs theory with discussion on existent disadvantages of classical finance infrastructure and proposal of future applications for Decentralized Finance. Y1 - 2023 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-36326 CY - Ingolstadt ER - TY - THES A1 - Pokam Tchawa, Abubakar T1 - P2GF (people to group of farmers) lending model for agriculture financing in Sub-Saharan Africa, with a focus on Cameroon. N2 - This study identifies aspects impeding the availability of agricultural financing in sub-Saharan Africa, specifically in the Republic of Cameroon and proposes an alternative source of financing called the P2GF (People to Group of Farmers) lending model for agriculture financing in sub-Saharan Africa. In Cameroon, over 40% of people work in agriculture, but its growth has been hindered by tremendous financial difficulties. Although government subsidies, microfinancing and middleman financing have been used to finance this sector, the impact has not been as great due to inefficiency, remoteness of smallholders and a lack of management skills. The lack of adequate data, as well as the lack of a strong technical infrastructure and robust legal system, have also limited the ability of financial technology like biometrics, artificial intelligence and cloud computing to have a significant impact on agricultural finance as in other financial sectors such as insurance, remittances and online banking across the globe. A SWOT (Strengths, Weaknesses, Opportunities and Threats) analysis of the current agricultural financial solution providers in Cameroon was performed using secondary resources from past research. This was followed by the proposal of the P2GF (People to Group of Farmers) lending model for agricultural financing that leverages mutual trust and social ties between smallholders to guard against agricultural loan default risk. Additionally, the model allows investors to invest in agricultural loans while diversifying their investment portfolios to avoid bad investments. Over 50 interviewees and 100 survey respondents proved that the solution is viable through primary research. The smallholders demonstrated a long-standing mutual trust built through group work and other participants interviewed who were not farmers showed an interest in farming and felt investing in a group was more beneficial. A web-based solution is presented at agrinkap.com to illustrate how information technology can be used to increase agricultural finance accessibility using the P2GF model. Y1 - 2023 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-36400 CY - Ingolstadt ER - TY - CHAP A1 - Thakur, Akshay A1 - Beck, Robert A1 - Mostaghim, Sanaz A1 - Großmann, Daniel A1 - Kuttler, Moritz ED - Tang, Loon-Ching T1 - Prediction of Top Key Performance Indicator in Automotive Production System using Data Mining T2 - WCSE 2022 Spring Event: Proceedings of 2022 9th International Conference on Industrial Engineering and Applications UR - https://doi.org/10.18178/wcse.2022.04.079 Y1 - 2022 UR - https://doi.org/10.18178/wcse.2022.04.079 SN - 978-981-18-5852-9 SP - 675 EP - 684 PB - SCIEI CY - Rowland Heights ER - TY - JOUR A1 - Dörr, Ulrike-Sabine A1 - Schönhofer, Gerhard A1 - Schwarz, Jan Oliver T1 - The state of foresight in small and medium enterprises: literature review and research agenda JF - European Journal of Futures Research N2 - AbstractSmall and medium-sized enterprises (SMEs) are the backbone of many economies. In today's world of VUCA (Volatility, Uncertainty, Complexity, Ambiguity), SMEs face diverse challenges to survive and stay competitive. SMEs must prepare themselves for these challenges by practicing foresight. However, foresight, and especially corporate foresight, has been conceptualized and researched in the context of large corporations. Applying foresight in SMEs is therefore complicated by the question of how to implement foresight in the context of SMEs given their specific requirements and limitations. This article provides an overview on the literature on the application of foresight in SMEs is, along with a summary of the extent to which SMEs conduct foresight from an organizational and individual perspective. Besides offering a compendium on the state of foresight in SMEs, a research agenda is formulated, incorporating the idea of a toolbox tailored to SMEs based on existing approaches and prior works. UR - https://doi.org/10.1186/s40309-024-00237-1 Y1 - 2024 UR - https://doi.org/10.1186/s40309-024-00237-1 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-50522 SN - 2195-2248 VL - 12 IS - 1 PB - SpringerOpen CY - Heidelberg ER - TY - CHAP A1 - Schönmann, Alexander ED - Drossel, Welf-Guntram ED - Ihlenfeldt, Steffen ED - Dix, Martin T1 - Transformation Needs Adoption: A Conceptual Framework to Develop Technology Implementation Strategies T2 - Production at the Leading Edge of Technology: Proceedings of the 14th Congress of the German Academic Association for Production Technology (WGP), Chemnitz University of Technology, December 2024 UR - https://doi.org/10.1007/978-3-031-86893-1_68 Y1 - 2025 UR - https://doi.org/10.1007/978-3-031-86893-1_68 SN - 978-3-031-86893-1 SP - 627 EP - 635 PB - Springer CY - Cham ER - TY - JOUR A1 - Zehnder, Elena A1 - Schwarz, Jan Oliver T1 - The interplay of future making and foresight: Insights from a family business case study JF - Futures UR - https://doi.org/10.1016/j.futures.2025.103608 Y1 - 2025 UR - https://doi.org/10.1016/j.futures.2025.103608 SN - 1873-6378 VL - 2025 IS - 170 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Bednarz, Martin A1 - Schweizer, Manuel A1 - Manurung, Yupiter HP T1 - Ressourceneffizienz in der Produktion - ein Vergleich zwischen Gießen und Additiver Fertigung JF - Giesserei Special KW - Fertigungsverfahren KW - Ressourceneffizienz KW - Energieeffizienz KW - Ökobilanz KW - Additive Fertigung KW - Gießen Y1 - 2021 UR - https://www.giesserei.eu/ausgaben/ausgabe-14-2021 SN - 2512-3157 VL - 2021 IS - 2 SP - 26 EP - 35 PB - DVS Media GmbH ER - TY - CHAP A1 - Mueller, Ralph A1 - Großmann, Daniel A1 - Schmied, Sebastian A1 - Mathias, Selvine George T1 - Architecture of a model in the middle approach for virtual commissioning and integration of production entities T2 - Proceedings: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) UR - https://doi.org/10.1109/ETFA45728.2021.9613619 KW - virtual commissioning KW - information model KW - information model management KW - cyber physical system KW - digital twin KW - machine communication KW - aggregation Y1 - 2021 UR - https://doi.org/10.1109/ETFA45728.2021.9613619 SN - 978-1-7281-2989-1 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Schmied, Sebastian A1 - Großmann, Daniel A1 - Mathias, Selvine George A1 - Mueller, Ralph T1 - A concept towards the evolution and versioning of aggregated information models T2 - Proceedings: 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) UR - https://doi.org/10.1109/ETFA45728.2021.9613193 KW - information modelling KW - versioning KW - evolution of models Y1 - 2021 UR - https://doi.org/10.1109/ETFA45728.2021.9613193 SN - 978-1-7281-2989-1 PB - IEEE CY - Piscataway ER - TY - JOUR A1 - Boddenberg, Felix A1 - Schwarz, Jan Oliver A1 - Schmies, Peter T1 - Scenario Planning in the Digital Transformation of the Fashion Industry: Starting Point for the Adjustment of Business Processes from a Colour Management Perspective JF - Journal of Futures Studies UR - https://doi.org/10.6531/JFS.202403_28(3).0004 Y1 - 2024 UR - https://doi.org/10.6531/JFS.202403_28(3).0004 SN - 1027-6084 VL - 28 IS - 3 SP - 49 EP - 63 PB - Tamkang University CY - Taipei ER - TY - JOUR A1 - Bechthold, Laura T1 - Rendering new futures or enshrining pictures of the past? The double-edged sword of using AI-generated imagery for anticipation JF - Journal of Futures Studies Y1 - 2025 UR - https://jfsdigital.org/rendering-new-futures-or-enshrining-pictures-of-the-past-the-double-edged-sword-of-using-ai-generated-imagery-for-anticipation/ SN - 1027-6084 PB - Tamkang University CY - Taipei ER - TY - CHAP A1 - Axmann, Bernhard A1 - Dzhelil, Sevgin Ahmed A1 - Najeeb, Asna T1 - Practical Comparison of UiPath and Power Automate by Creating an Automation Use Case from Logistics T2 - 2024 14th International Conference on Advanced Computer Information Technologies ACIT’2024: Conference Proceedings UR - https://doi.org/10.1109/ACIT62333.2024.10712623 Y1 - 2024 UR - https://doi.org/10.1109/ACIT62333.2024.10712623 SN - 979-8-3503-5004-3 SP - 224 EP - 229 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Moser, Christina A1 - Wrobel, Stefanie A1 - Schönmann, Alexander ED - Dumitrescu, Roman ED - Hölzle, Katharina T1 - Open Foresight als Ansatz einer ressourceneffizienten strategischen Vorausschau für KMU T2 - Vorausschau und Technologieplanung : 18. Symposium für Vorausschau und Technologieplanung, 5. und 6. Dezember 2024, Berlin UR - http://dx.doi.org/10.17619/UNIPB/1-2163 Y1 - 2024 UR - http://dx.doi.org/10.17619/UNIPB/1-2163 SN - 978-3-947647-44-6 SP - 193 EP - 212 PB - Universität Paderborn CY - Paderborn ER - TY - THES A1 - Hubrich, Aaron T1 - Modeling and analysis of system architectures for cooling high-energy, pulsed heat loads on military aircraft N2 - The thermal management systems on military aircraft have become a bottleneck for deploying novel technologies that produce high-energy, pulsed heat loads. Multiple approaches for heat rejection of such heat loads have already been considered, but no meaningful conclusion can be made about which approach is best suited for this application. This thesis aims to identify the system architecture that is most suited for dealing with these high-energy pulsed heat loads. This was done by simulating a Vapor Compression Cycle and two systems using sensible and latent heat storage using Simcenter Amesim. The systems were assessed regarding their system mass. The results show that the system utilizing sensible heat storage reduces the overall system mass by 67% while using latent heat storage increases system mass by 71% compared to the simple Vapor Compression Cycle. Based on these findings, a clear recommendation can be made that future research in this field should focus on developing architectures using sensible heat storage. Y1 - 2024 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-45576 CY - Ingolstadt ER - TY - THES A1 - Kus, Muhammed Ebrar T1 - Zukunftsfähige Produktionsnetzwerke der Automobilindustrie N2 - Diese Bachelorarbeit untersucht die Einflüsse der aktuellen Trends der Globalisierung, Digitalisierung und Nachhaltigkeitsbestrebungen auf die Struktur und Effizienz internationaler Produktionsnetzwerke in der deutschen Automobilindustrie. Die damit in Verbindung stehenden Herausforderungen und Auswirkungen werden herausgearbeitet und auf Basis dessen werden zukünftige Szenarien abgeleitet. Die Problemstellung konzentriert sich darauf, wie diese Trends die geografische Verteilung von Produktionsstandorten, die technologische Integration und die strategischen Entscheidungen der Unternehmen beeinflusst haben. Dabei liegt der Fokus insbesondere auf der deutschen Automobilindustrie. Die Ergebnisse dieser Forschung bestätigen, dass die Globalisierung zu einer internationalen Ausweitung der Produktionsstandorte geführt hat, während die Digitalisierung eine Transformation der Produktionsprozesse und eine zunehmende Vernetzung ermöglicht hat. Gleichzeitig haben die Bestrebungen nach Nachhaltigkeit zu einer Neuausrichtung von Produktionsmethoden und einer verstärkten Verantwortung für ökologische Aspekte geführt. Zukünftige Entwicklungen werden voraussichtlich von einer fortschreitenden Digitalisierung, verstärkten Nachhaltigkeitsbemühungen und sich ändernden globalen Handelsbeziehungen geprägt sein. Aufgrund der COVID-19-Pandemie und dem Ukrainekrieg, die jeweils in Produktionsunterbrechungen resultierten, wird für die deutsche Automobilindustrie ein Wandel zur Lokalisierung prognostiziert. Y1 - 2024 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-44962 CY - Ingolstadt ER - TY - THES A1 - Ben Ahmed, Farah T1 - Practical applications of a collaborative robot system BT - GoFa CRB 15000 N2 - This thesis explores the practical applications of the GoFa CRB 15000, a collaborative robot system designed for real-world use within an educational setting. The robot’s potential, despite its technical complexity and students' varying programming skills, is reassured by its practicality. This work aims to bridge this knowledge gap, enhancing the robot’s practical use and providing students with the necessary knowledge to operate it effectively. We delve into the operation and functions of the GoFa CRB 15000, aiming to develop a comprehensive understanding that will empower us to integrate the robot effectively into our lab exercises. This comprehensive understanding instills confidence in the depth of our research. It includes a detailed review of the technical basics, challenges, and applications of collaborative robotics, as well as the specific characteristics of the GoFa CRB 15000. The thesis not only presents an operational framework for the robot but also develops an educational concept for students that encompasses safety protocols and training exercises. We design and test application cases in the assembly workspace and explore advanced use cases such as visual object recognition and handling using available ABB tools and platforms. The robot's performance for lab user purposes is evaluated, considering safety, efficiency, and user satisfaction criteria. The findings from this work will provide valuable insights for our university students' future projects and experiments involving the GoFa CRB 15000. Y1 - 2024 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-49429 CY - Ingolstadt ER - TY - THES A1 - Petz, Tobias T1 - Anforderungen zur Einführung eines ESRS EPM Systems N2 - Im Rahmen der vorliegenden Bachelorarbeit werden Anforderungen zur erfolgreichen Einführung einer Enterprise Performance Management Plattform zur Umsetzung der European Sustainability Reporting Standards identifiziert. Zudem werden ein potentieller Prozess zur erfolgreichen Einführung skizziert sowie die wichtigsten zu beantwortenden Fragestellungen aufgezeigt. Dafür wird zunächst ein gesamtheitlicher Überblick über die Historie der Nachhaltigkeitsberichterstattung sowie die seit 2024 geltenden Spezifikationen der ESRS geliefert. Eine Einführung in die Grundlagen der Unternehmensplanung sowie den Sonderfall des Enterprise Performance Managements schließt dieses Kapitel ab. Die Analyse der Anforderungen erfolgt auf Basis von 5 Experteninterviews sowie zwei exemplarischen ESRS EPM Systemen. Somit soll Unternehmen eine Hilfestellung bei der für einige zukünftig verpflichtenden Umsetzung der Corporate Sustainability Reporting Directive gegeben werden. Y1 - 2024 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-51055 CY - Ingolstadt ER - TY - THES A1 - Ramirez Diaz, Julio Cesar T1 - Comparison of forecasting models for enhancement and improvement of an avocado production business N2 - The major change that we are experiencing with the Industry 4.0 is the volume of data that is produced every second and also the interconnection of sensors and actors. Thus leading us to the production of Big Data, which in other words could be described as a vast amount of information that lacks a sense if not processed. One important digital tool concept specific to process Big Data is Forecasting Models, through their use is possible to give Big Data a meaning and sense that can be used for economical purposes in a business organization. Therefore this thesis is written with the intention of understanding the theory behind three Forecasting Models digital tools and then implement them in a real life case study of an avocado production business. The document starts with an introduction to Forecasting Models in the first section and an overview of Crisp Methodology in the second section, then the document continues in the third section with an analytic understanding of the avocado business context and data processing to prepare the data inputs that are going to be used with the Forecasting Models, after this in section four results are presented and analyzed in order to understand their meaning and business impact conclusions, at the end of this section opportunities of improvement are also presented as final suggestions for the avocado production business case study. Y1 - 2021 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-32636 CY - Ingolstadt ER - TY - THES A1 - Kopp, Maximilian T1 - Entwicklung einer Methode zur Analyse der CO2-Äquivalente für die Produktion von Sonderanlagen BT - empirische Analyse in Zusammenarbeit mit der Hecht Technologie GmbH N2 - In den letzten Jahren hat der Nachhaltigkeitsgedanke bei der HECHT Technologie GmbH stark an Bedeutung gewonnen. Die Frage, welchen Beitrag HECHT Technologie zum Schutz der Umwelt leisten kann, wird erfolgreich angegangen. Die positive Resonanz der Kunden sowie die hervorragenden ECOVADIS-Zertifizierungen bestätigen die positive Entwicklung des Unternehmens. Im Jahr 2021 bekam Hecht eine Anfrage von der Bayer AG, ob es möglich wäre, die Emissionen bei der Produktion der Maschinen und Anlagen zu reduzieren. In der vorliegenden Bachelorarbeit wird nun untersucht, wie hoch der Verbrauch an CO2-Äquivalenten bei der Herstellung einer HECHT Anlage ist, um herauszuarbeiten, was die wichtigsten Schlüsselfaktoren für Einsparungen in der Produktion sind. Zuerst wird empirisch untersucht, bei welchen Prozessschritten der Fertigungsbetriebe im metallverarbeitenden Gewerbe CO2-Äquivalente freigesetzt werden. Anschließend wird am Beispiel eines ausgewählten Fertigungsbetriebes aufgezeigt, wie hoch der CO2-Fußabdruck in der Praxis sein kann. Des Weiteren werden Einsparpotentiale für Fertigungsbetriebe im metallverarbeitenden Gewerbe erklärt. Darauf aufbauend wird eine Methode vorgestellt, die auf alle Anlagen und Hersteller angewendet werden kann. Zudem werden Chancen und Risiken sowie eine Szenario-Analyse bezüglich der entwickelten Methode vorgestellt. Die entwickelte Methode wird schließlich auf eine HECHT typische Anlage und einen Fertigungsbetrieb angewendet, um die CO2-Äquivalente zu ermitteln. Ziel ist es, eine Methode zu finden, die einen Wert für die CO2-Äquivalente (kg CO2e / EUR Umsatz) in Abhängigkeit von einer Variablen, dem Umsatz, liefert. Abschließend werden Schwierigkeiten in der Praxis aufgezeigt und ein Ausblick in die Zukunft gegeben. Y1 - 2023 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-34199 CY - Ingolstadt ER - TY - THES A1 - Ulrich, Michael T1 - Analyse verschiedener Channel-Strategien im Lebensmittelhandel unter Berücksichtigung der Distributionslogistik am Beispiel von Kulturpilzen. N2 - Eine nachhaltige Lebensmittelversorgung der wachsenden Bevölkerung ist ein zentrales Thema in der Lebensmittelbranche. Das derzeitige Umdenken der Menschen in Richtung Ressourcenschonung führt bereits zu einer Änderung der Ernährungsgewohnheiten. Die Lebensmittelproduzenten und -händler müssen auf diesen Wandel reagieren, um die Existenz ihres Unternehmens zu sichern. Hierfür sind vor allem strategische Anpassungen im Vertrieb notwendig, welcher die Hauptaufgabe besitzt, den Kontakt zwischen Kunden und Produzenten herzustellen und dadurch einen hohen Wert für den Erfolg des Unternehmens besitzt. Die vorliegende Bachelorarbeit beschäftigt sich mit der Analyse verschiedener Channel-Strategien im Lebensmittelhandel unter Berücksichtigung der Distributionspolitik. Als Beispiel wird der Handel mit Kulturpilzen die Arbeit begleiten, da sich diese aufgrund ihrer Nährstoffe und eines möglichen nachhaltigen Anbaus als fleischloses Nahrungsmittel für die Zukunft eigenen. Nicht zuletzt wegen der notwendig optimierten Distribution des leicht verderblichen Kulturpilzes wird dieser als Beispiel betrachtet. Um die Motivation der Arbeit zu begründen wird das aktuelle Verhalten der Abnehmer bzw. Konsumenten untersucht. Ein Schwerpunkt ist die Erläuterung der Distributionslogistik im Lebensmittelhandel von leicht verderblichen Lebensmitteln und daneben die Betrachtung der potenziellen Vertriebskanäle. Unter Bezugnahme der erlangten theoretischen Kenntnisse und sekundärstatistischen Materials werden die Channel-Strategien unter mehreren Gesichtspunkten analysiert. Dabei werden Handlungsempfehlungen für die Auswahl der Channel-Strategie im Lebensmittelhandel getroffen. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-34308 CY - Ingolstadt ER - TY - THES A1 - Gaugler, Carmen T1 - Kollaborative Robotik BT - ein Konzept zur Erweiterung eines Cobots zu einem Montageassistenten mittels optischer Identifikation. N2 - Die zunehmende Variantenvielfalt in der Automobil-, Elektro- und Maschinenbauindustrie stellt die Fertigung als auch die Montage vor neue Herausforderungen. Die Herstellung unzähliger Varianten muss so gesteuert werden, dass Termin- und Kostenziele erreicht werden können. Dabei soll außerdem durch die Arbeitsteilung zwischen Mitarbeitern und kollaborativen Robotern, die jeweiligen Kernkompetenzen genutzt werden, um stets ein hohes Qualitätsniveau zu erzielen. Nachdem optische Identifikationstechnologien die Prozesse in der Logistikbranche optimiert haben, stellt die optische Identifikation auch eine Möglichkeit zur effizienten Steuerung der variantenreichen Montage dar. In dieser Arbeit wird ein Montageprozess entwickelt, der von QR Codes gesteuert wird. Es soll ein kollaborativer Roboter durch die QR Code Steuerung dem Werker als Montageassistent zur Seite stehen und diesen individuell unterstützen. Dabei soll die zu fertigende Variante durch QR Codes erkannt und die benötigten Roboterabläufe durch QR Codes ausgelöst werden. Zum Schluss wird der Nutzen von QR Codes zur Steuerung eines Cobots und zur Komplexitätsminderung der variantenreichen Montage evaluiert. Außerdem wird darauf eingegangen, inwiefern ein QR Code gesteuerter Roboter die Leistung des Werkers unterstützt und ob dadurch eine flexiblere Planung von Mitarbeitern und Arbeitsplätzen ermöglicht wird. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-34348 CY - Ingolstadt ER - TY - THES A1 - Töllich, Niklas T1 - Betrachtung der Markenbewertungsmethoden an einem Praxisbeispiel BT - eine Case-Study auf Basis von Apple N2 - Marken gehören zu den wichtigsten Treibern für den Erfolg von Unternehmen. Dennoch gehört die quantitative Bewertung von Marken nicht zu den gängigen Prozessen in Unternehmen. Die Vielzahl an Verfahren und unpräzisen Vorgaben zur Markenbewertung vereinfachen dabei nicht die Aufnahme der Markenbewertung in das Unternehmensgeschehen. Daher werden in dieser Arbeit eine Auswahl an Markenbewertungsverfahren betrachtet und ihre Vor- und Nachteile ausgearbeitet. Anschließend werden die Methoden in einer Case-Study am Technologie-Konzern Apple angewendet. Die Ergebnisse werden anschließend mit einer Benchmark für den Markenwert von Apple verglichen, um die Verfahren einordnen zu können und die präzisesten Verfahren herauszuarbeiten. Außerdem wird eine Portfolio-Analyse durchgeführt, um die Verwendbarkeit der einzelnen Verfahren zu betrachten. Die Haupterkenntnis ist, dass die Auswahl des Verfahrens einen erheblichen Einfluss auf den ermittelten Markenwert hat und damit die Entscheidung für ein bestimmtes Verfahren fundiert sein sollte. Die Lizenzpreisanalogie-Methode und das Price to Sales Ratio-Verfahren liefern aus Sicht der Case-Study die genauesten Markenbewertungen. Das Transaktions-Multiple-Verfahren ist nach Portfolio-Analyse das attraktivste Verfahren. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35752 CY - Ingolstadt ER - TY - THES A1 - Kubiczak, Sebastian Matthias T1 - BI im Nachhaltigkeitsmanagement BT - Marktstudie, Softwareevaluierung & Potenzialanalyse für die interne Unternehmenssteuerung N2 - Jede Entscheidung, die in einem Unternehmen getroffen wird, ist von den verfügbaren Daten abhängig. Je umfassender diese Daten sind, desto fundierter sind die Entscheidungen. Dies gilt für jeden Bereich eines Unternehmens. Um nachhaltig sein zu können, benötigt ein Unternehmen alle Fakten, die wesentlich für den jeweiligen Sachverhalt sind. Diese Arbeit befasst sich damit, wie internes Nachhaltigkeitsreporting durchgeführt wird und wie Business Intelligence (BI) Software dieses unterstützen kann. Ziel ist es, herauszufinden, ob die Braincourt GmbH über die richtigen Tools verfügt, um ihren Kunden Lösungen im Bereich des Nachhaltigkeitsreportings anbieten zu können. Dafür werden relevante wissenschaftliche Publikationen gesichtet, um alle Aspekte des Nachhaltigkeitsmanagements aufzudecken. Außerdem wird mithilfe einer Umfrage sowie einer Marktstudie untersucht, wie Nachhaltigkeit in der Praxis gesteuert wird und welche Funktionen Tools zur Unterstützung benötigen. Zu guter Letzt werden alle Parameter in einem BI-Tool angewendet. Die Ergebnisse zeigen, dass BI eine große Rolle in der Unterstützung des Nachhaltigkeitsreportings spielen kann. Es fehlen zwar einige Funktionen von Nachhaltigkeitstools, jedoch überzeugen BI-Tools durch Benutzerfreundlichkeit und intuitive Oberflächen. Dadurch kann Effizienz erhöht und jeder Teil einer Unternehmensentscheidung unterstützt werden. Ein Nachhaltigkeitsreporting-System benötigt nicht zwangsläufig ein bestimmtes Tool. Vielmehr kann durch ein benutzerfreundliches und performantes Tool ein schneller Überblick, über die Nachhaltigkeitsbestrebungen eines Unternehmens erlangt werden. Mit den analytischen Funktionen von BI kann Nachhaltigkeit eine wichtige Stärke jedes Unternehmens werden. Y1 - 2021 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-33138 CY - Ingolstadt ER - TY - THES A1 - Suissi, Mohamed Achraf T1 - Programming environment of PLCs (SPS) IEC 61131-3 N2 - PLCs Programming environment IEC 61131-3 Y1 - 2021 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-33203 CY - Ingolstadt ER - TY - THES A1 - Morina, Majlinda T1 - Augmented reality tools and applications for worker management as well as planning and production support N2 - Augmented Reality (AR) is identified as one of the top technologies of the 21st century. Augmented reality has been a field of interest for many researchers in the recent years. Almost every day, new use cases and applications are found. This new way of digitization is to be considered very positively and allows large improvements in the fields of work efficiency, process acceleration, and cost savings. Due to the widespread use of the smartphones and tablets, AR has become very diffuse. This thesis conducts a systematic review of the current literature on AR applications implemented for smart manufacturing. The analysis shows that AR supports different manufacturing operations in a smart way. Important findings are derived and presented with regards to the strengths and weaknesses of the technology, manufacturing functions that mostly gain from AR and most popular AR devices. The point of view here is on how AR can work as an interaction interface between human and machine. The outcome of this work shows that, despite the advancements made on AR, many limitations should be overcome before AR is ready to enter the shopfloor in a broad range. Y1 - 2021 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-23139 CY - Ingolstadt ER - TY - THES A1 - Neumann, Julian Alexander T1 - Zukunftsorientiertes Design für Bürostühle BT - Integration von Ergonomie und Nachhaltigkeit im Zeitalter neuer Arbeitsmodelle und technologischer Innovationen Y1 - 2024 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-50095 CY - Ingolstadt ER - TY - JOUR A1 - Schmied, Sebastian A1 - Mathias, Selvine George A1 - Großmann, Daniel A1 - Jumar, Ulrich T1 - Integration of existing cyber-physical manufacturing systems into a common information model JF - IFAC-PapersOnLine N2 - In order to be able to serve constantly new customer requirements, manufacturing systems must be able to adapt to frequent changes. In addition, repeatedly objects are removed or added to the network. To control and monitor such a constantly changing system a mapping of existing manufacturing systems into a common information model is necessary. This model describes information that is produced and stored in different entities of the complete system. To create a common address space and expose the relations between the devices an aggregation of every element in the system is needed. This paper describes a methodology for the creation of an information model for a complete manufacturing environment, followed by an approach for the aggregation of the singular system entities. The concept of this paper is illustrated with a demonstrator. The results of this approach have been discussed in the following sections along with the proposal for further directions. UR - https://doi.org/10.1016/j.ifacol.2020.12.2827 KW - Information Model KW - Aggregation KW - OPC UA KW - Cyber-physical manufacturing systems Y1 - 2021 UR - https://doi.org/10.1016/j.ifacol.2020.12.2827 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-13309 SN - 2405-8963 VL - 53 IS - 2 SP - 10905 EP - 10910 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Koval, Leonid A1 - Pfaller, Daniel A1 - Bilal, Mühenad A1 - Bregulla, Markus A1 - Cupek, Rafal T1 - An analysis of convolutional neural network models for classifying machine tools T2 - Advances in Computational Collective Intelligence UR - https://doi.org/10.1007/978-3-030-88113-9_37 KW - image classification KW - domain relevance KW - F1-score KW - confusion-matrix KW - machine tools Y1 - 2021 UR - https://doi.org/10.1007/978-3-030-88113-9_37 SN - 978-3-030-88112-2 SN - 978-3-030-88113-9 SN - 1865-0929 SN - 1865-0937 SP - 461 EP - 473 PB - Springer CY - Cham ER - TY - JOUR A1 - Schwarz, Jan Oliver A1 - Wach, Bernhard T1 - The usage of cultural products in design thinking: An assessment of an underestimated approach JF - The Design Journal UR - https://doi.org/10.1080/14606925.2021.2005879 KW - design thinking KW - design research KW - cultural products KW - customers KW - ethnography Y1 - 2022 UR - https://doi.org/10.1080/14606925.2021.2005879 SN - 1460-6925 SN - 1756-3062 VL - 25 IS - 1 SP - 4 EP - 24 PB - Taylor & Francis CY - London ER - TY - CHAP A1 - Thakur, Akshay A1 - Beck, Robert A1 - Mostaghim, Sanaz A1 - Großmann, Daniel T1 - Survey into predictive key performance indicator analysis from data mining perspective T2 - Proceedings 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) UR - https://doi.org/10.1109/ETFA46521.2020.9212111 KW - KPI selection KW - KPI relationship KW - key performance indicators KW - predictive analysis KW - survey KW - data mining KW - best practices Y1 - 2020 UR - https://doi.org/10.1109/ETFA46521.2020.9212111 SN - 978-1-7281-8956-7 SP - 476 EP - 483 PB - IEEE CY - Piscataway ER - TY - JOUR A1 - Schwarz, Jan Oliver T1 - From alternative pictures of the future to an organizational intervention: A commentary on Rowland and Spaniol JF - Futures & Foresight Science UR - https://doi.org/10.1002/ffo2.105 Y1 - 2021 UR - https://doi.org/10.1002/ffo2.105 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-18942 SN - 2573-5152 VL - 4 IS - 1 PB - Wiley CY - Hoboken ER - TY - BOOK ED - Marrella, Andrea ED - Matulevičius, Raimundas ED - Gabryelczyk, Renata ED - Axmann, Bernhard ED - Bosilj Vukšić, Vesna ED - Gaaloul, Walid ED - Štemberger, Mojca Indihar ED - Kő, Andrea ED - Lu, Qinghua T1 - Business Process Management BT - Blockchain, Robotic Process Automation, and Central and Eastern Europe Forum. BPM 2022 Blockchain, RPA, and CEE Forum, Münster, Germany, September 11–16, 2022, Proceedings T3 - Lecture Notes in Business Information Processing UR - https://doi.org/10.1007/978-3-031-16168-1 KW - business process management KW - blockchain KW - distributed ledger technologies KW - information systems security KW - artificial intelligence KW - process modeling KW - robotic process automation KW - hyperautomation KW - software robots KW - smart contracts Y1 - 2022 UR - https://doi.org/10.1007/978-3-031-16168-1 SN - 978-3-031-16167-4 SN - 978-3-031-16168-1 VL - 459 PB - Springer CY - Cham ER - TY - CHAP A1 - Bilal, Mühenad A1 - Mayer, Christian A1 - Kancharana, Sunil A1 - Bregulla, Markus A1 - Cupek, Rafal A1 - Ziębiński, Adam ED - Bădică, Costin ED - Treur, Jan ED - Benslimane, Djamal ED - Hnatkowska, Bogumiła ED - Krótkiewicz, Marek T1 - Damage Detection of Coated Milling Tools Using Images Captured by Cylindrical Shaped Enclosure Measurement Setup T2 - Advances in Computational Collective Intelligence. 14th International Conference, ICCCI 2022, Hammamet, Tunisia, September 28–30, 2022, Proceedings UR - https://doi.org/10.1007/978-3-031-16210-7_21 KW - quality inspection KW - damage detection KW - image processing KW - tool regrinding KW - measurement setup Y1 - 2022 UR - https://doi.org/10.1007/978-3-031-16210-7_21 SN - 978-3-031-16209-1 SN - 978-3-031-16210-7 SP - 264 EP - 272 PB - Springer CY - Cham ER - TY - CHAP A1 - Bhavnani, Sidhant A1 - Schiendorfer, Alexander ED - Schaus, Pierre T1 - Towards copeland optimization in combinatorial problems T2 - Integration of Constraint Programming, Artificial Intelligence, and Operations Research; 19th International Conference, CPAIOR 2022, Los Angeles, CA, USA, June 20-23, 2022; Proceedings UR - https://doi.org/10.1007/978-3-031-08011-1_4 KW - constraint programming KW - social choice theory KW - OR Y1 - 2022 UR - https://doi.org/10.1007/978-3-031-08011-1_4 SN - 978-3-031-08010-4 SN - 978-3-031-08011-1 N1 - Access provided by Nationallizenz Ebooks Medicine SP - 34 EP - 43 PB - Springer CY - Cham ER - TY - CHAP A1 - Mathias, Selvine George A1 - Großmann, Daniel A1 - Schmied, Sebastian A1 - Mueller, Ralph T1 - Decentralized Integration Approach of Disjoint Modules in Factory Environments T2 - IEIM 2022: 2022 The 3rd International Conference on Industrial Engineering and Industrial Management UR - https://doi.org/10.1145/3524338.3524368 KW - Data Acquisition KW - OPC UA KW - Comunication KW - Instruments Y1 - 2022 UR - https://doi.org/10.1145/3524338.3524368 SN - 978-1-4503-9569-4 SP - 195 EP - 199 PB - ACM CY - New York ER - TY - CHAP A1 - Mueller, Ralph A1 - Großmann, Daniel A1 - Schmied, Sebastian T1 - Information model-based virtual commissioning for the testing and co-simulation of real production entities BT - Enabling of a logic for the virtual commissioning of information models using middleware technologies T2 - IEIM 2022: 2022 The 3rd International Conference on Industrial Engineering and Industrial Management UR - https://doi.org/10.1145/3524338.3524380 KW - Virtual Commissioning KW - Information Model KW - Co-Simulation KW - Cyber Physikal System KW - Machine Communication Y1 - 2022 UR - https://doi.org/10.1145/3524338.3524380 SN - 978-1-4503-9569-4 SP - 271 EP - 276 PB - Association for Computing Machinery CY - New York ER - TY - CHAP A1 - Kampa, Thomas A1 - Müller, Christian Klaus A1 - Großmann, Daniel T1 - IP-based Architecture for an Edge Cloud enabled Factory BT - Concept and Requirements T2 - 2022 IEEE 18th International Conference on Factory Communication Systems (WFCS) UR - https://doi.org/10.1109/WFCS53837.2022.9779162 KW - industrial internet of things KW - virtualization KW - brownfield deployment KW - industrial network Y1 - 2022 UR - https://doi.org/10.1109/WFCS53837.2022.9779162 SN - 978-1-6654-1086-1 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Hecht, Dirk ED - Hecht, Dirk T1 - Neue Geschäftsmodelle T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 SP - 342 EP - 351 PB - Kohlhammer CY - Stuttgart ER - TY - BOOK ED - Hecht, Dirk T1 - Modernes Beschaffungsmanagement in Lehre und Praxis KW - Beschaffung KW - Beschaffungspolitik KW - Global Sourcing Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 PB - Kohlhammer CY - Stuttgart ER - TY - CHAP A1 - Bilal, Mühenad A1 - Kancharana, Sunil A1 - Mayer, Christian A1 - Bregulla, Markus A1 - Ziębiński, Adam A1 - Cupek, Rafal ED - Osten, Wolfgang ED - Nikolaev, Dmitry ED - Zhou, Jianhong T1 - Image-based damage detection on TiN-coated milling tools by using a multi-light scattering illumination technique T2 - Fourteenth International Conference on Machine Vision (ICMV 2021) UR - https://doi.org/10.1117/12.2623140 Y1 - 2022 UR - https://doi.org/10.1117/12.2623140 SN - 978-1-5106-5045-9 SN - 978-1-5106-5044-2 PB - SPIE CY - Bellingham ER - TY - CHAP A1 - Hecht, Dirk A1 - Hofbauer, Günter ED - Hecht, Dirk T1 - Vom operativen Einkauf zum modernen Beschaffungsmanagement T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 SP - 15 EP - 18 PB - Kohlhammer CY - Stuttgart ER - TY - CHAP A1 - Hecht, Dirk ED - Hecht, Dirk T1 - Methoden des klassischen Einkaufs und Prozesse des Advanced Procurement T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039954-9 SN - 978-3-17-039953-2 SP - 19 EP - 41 PB - Kohlhammer CY - Stuttgart ER - TY - CHAP A1 - Hofbauer, Günter A1 - Schwandner, Gerd ED - Hecht, Dirk T1 - Innovationsmanagement als Werthebel für das Beschaffungsmanagement T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 SP - 58 EP - 87 PB - Kohlhammer CY - Stuttgart ER - TY - CHAP A1 - Götz, Heike ED - Hecht, Dirk T1 - Konfliktmanagement T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 SP - 108 EP - 131 PB - Kohlhammer CY - Stuttgart ER - TY - CHAP A1 - Hecht, Dirk ED - Hecht, Dirk T1 - Grundzüge des Vertragsmanagements T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 SP - 132 EP - 148 PB - Kohlhammer CY - Stuttgart ER - TY - CHAP A1 - Hecht, Dirk A1 - Uhlhorn, Otto ED - Hecht, Dirk T1 - Riskmanagement in der Beschaffung T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 SP - 200 EP - 215 PB - Kohlhammer CY - Stuttgart ER - TY - CHAP A1 - Hecht, Dirk ED - Hecht, Dirk T1 - Sourcingstrategien und Make-or-Buy Entscheidungen T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 SP - 216 EP - 227 PB - Kohlhammer CY - Stuttgart ER - TY - CHAP A1 - Fazekas, Stefan A1 - Hecht, Dirk ED - Hecht, Dirk T1 - Internationale Beschaffungsprojekte und Aspekte praktischer Interkulturalität T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 SP - 245 EP - 264 PB - Kohlhammer CY - Stuttgart ER - TY - CHAP A1 - Hecht, Dirk ED - Hecht, Dirk T1 - Nachhaltiges Beschaffungsmanagement und Resilienz der Lieferkette T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 SP - 264 EP - 275 PB - Kohlhammer CY - Stuttgart ER - TY - CHAP A1 - Hecht, Dirk A1 - Knöll, Isabelle A1 - Arndt, Anna Karolina ED - Hecht, Dirk T1 - Beschaffung 4.0 und Digitalisierung der Verhandlung T2 - Modernes Beschaffungsmanagement in Lehre und Praxis Y1 - 2022 SN - 978-3-17-039953-2 SN - 978-3-17-039954-9 SP - 279 EP - 325 PB - Kohlhammer CY - Stuttgart ER - TY - JOUR A1 - Axmann, Bernhard A1 - Harmoko, Harmoko T1 - Process & Software Selection for Robotic Process Automation (RPA) JF - Tehnički glasnik N2 - Robotic process automation (RPA) is a technology for office automation to imitate human behaviour when interacting with computers to perform digitized tasks manually, such as opening and closing applications, reading documents, entering data, and sending e-mails. As with any new digital technology answering the question of where to start and what is the right software, is challenging. In the case of RPA, the question of where to start depends on the selection of the business process to be automated and optimized. There are approaches for process selection in research, but they are relatively complex and have not been validated in practice. To fill this gap, we have simplified the process selection method and validated it on a practical example. We also present a simple method to select the appropriate RPA software. The criteria selection and evaluation were done with the Pairwise Comparison and Benefit Value Analysis method. This approach is relatively easy to follow and to apply in practice and thus also closes a gap in applied research. UR - https://doi.org/10.31803/tg-20220417182552 KW - assessment KW - office automation KW - process selection KW - RPA (Robotic Process Automation) KW - software selection Y1 - 2022 UR - https://doi.org/10.31803/tg-20220417182552 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-35250 SN - 1848-5588 VL - 16 IS - 3 SP - 412 EP - 419 PB - University North CY - Koprivnica ER - TY - JOUR A1 - Schwarz, Jan Oliver A1 - Wach, Bernhard A1 - Rohrbeck, René T1 - How to anchor design thinking in the future: Empirical evidence on the usage of strategic foresight in design thinking projects JF - Futures N2 - Many organizations use design thinking (DT) to develop future products and services. DT is often used for its ability to serve as a common “language” and platform to enable market-facing departments and technology-oriented units to cocreate innovations. DT has been shown to be a powerful tool for helping to identify and connect the needs of average customers (personas) with technical solutions that form the basis for winning products. In this paper, we investigate the extent to which DT professionals already use strategic foresight (SF) methods that anticipate future customer needs and highlight emerging technologies to expand classical DT and anchor their projects in the future. Using survey data on 302 DT projects, we report on the extent to which SF methods are used in DT projects, the overriding types of SF methods in DT projects, and their impact on project success. UR - https://doi.org/10.1016/j.futures.2023.103137 KW - Design thinking KW - Strategic foresight KW - Trends KW - Scenarios KW - Science fiction Y1 - 2023 UR - https://doi.org/10.1016/j.futures.2023.103137 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-36135 SN - 1873-6378 VL - 2023 IS - 149 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Bednarz, Martin T1 - Industrieller Einsatz von 3D-Druck-Systemen – Ein Leitfaden JF - Industrie 4.0 Management KW - Additive Fertigung KW - Generative Fertigung KW - 3D-Druck Y1 - 2020 UR - https://www.industrie-management.de/ SN - 1434-1980 SN - 2364-9208 VL - 36 IS - 4 SP - 63 EP - 66 PB - GITO mbH Verlag CY - Berlin ER - TY - BOOK A1 - Schwarz, Jan Oliver T1 - Strategic Foresight BT - An Introductory Guide to Practice UR - https://doi.org/10.4324/9781003302735 Y1 - 2023 UR - https://doi.org/10.4324/9781003302735 SN - 9781003302735 PB - Routledge CY - London ER - TY - JOUR A1 - Demiral, Tarik A1 - Bock, Jürgen A1 - Johansson, Pierre T1 - Challenges in Flexible Manufacturing Technologies for the Final Assembly in the Commercial Vehicle Industry JF - Tehnički glasnik N2 - Increasing customer demands and product diversity as well as emerging technologies and market trends, such as the establishment of new driveline technologies, like e-mobility or hydrogen, present challenges for manufacturing companies in the commercial vehicle industry. Consequently, companies must strengthen their focus to the aspect of flexibility within their manufacturing processes. This paper contributes to the state of the art in flexible manufacturing technologies research, which enables manufacturing companies to deal with these increasing flexibility requirements. Focussing on the area of final assembly the paper takes a holistic perspective and characterizes the readiness of automotive companies to be able to implement flexible manufacturing technologies. The system ecosystem and the process organization of automotive companies are examined with respect to the requirements of flexible manufacturing. Finally, gaps that hinder the implementation of flexible manufacturing technologies are identified and described, and possible solution concepts for the identified gaps are proposed. UR - https://doi.org/10.31803/tg-20230417140747 KW - business capabilities KW - final assembly KW - flexibility KW - gap analysis KW - manufacturing Y1 - 2023 UR - https://doi.org/10.31803/tg-20230417140747 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-37880 SN - 1848-5588 VL - 17 IS - 2 SP - 260 EP - 267 PB - University North CY - Koprivnica ER - TY - CHAP A1 - Ambrosy, Niklas A1 - Kampa, Thomas A1 - Jumar, Ulrich A1 - Großmann, Daniel T1 - 5G and DetNet: Towards holistic determinism in industrial networks T2 - 2022 IEEE International Conference on Industrial Technology (ICIT) UR - https://doi.org/10.1109/ICIT48603.2022.10002776 KW - 5G KW - Deterministic Networking KW - Time-Sensitive Networking KW - Software-Defined Networking KW - industrial communication Y1 - 2022 UR - https://doi.org/10.1109/ICIT48603.2022.10002776 SN - 978-1-72811-948-9 PB - IEEE CY - Piscataway ER - TY - JOUR A1 - Axmann, Bernhard A1 - Harmoko, Harmoko A1 - Malhotra, Rahul T1 - The Assessment of Robotic Process Automation Projects with a Portfolio Analysis: First Step - Evaluation Criteria Identification and Introduction of the Portfolio Concept JF - Tehnički glasnik N2 - RPA’s (Robotic Process Automation) usage in organizations has rapidly increased in recent years; as a result, companies have developed high expectations from this technology. However, according to Ernst & Young (E&Y), 30-50% of observed RPA projects initially fail and reveal several risks, which lead to investment losses. Consequently, the RPA project is prematurely retired, and the company is back to the manual process. This premature retirement is mainly because of wrong process selection and the not sufficient company automation (RPA) maturity. Therefore, this paper will introduce the concept of an RPA Portfolio, which will assess the complexity of business processes with a company’s automation (RPA) maturity. The RPA Portfolio is a new innovative concept to simplify and visualize the business process selection for RPA projects, and will help to introduce successfully the right RPA projects. UR - https://doi.org/10.31803/tg-20230416193006 KW - automation maturity KW - business process KW - portfolio KW - robotic process automation KW - technology assessment Y1 - 2023 UR - https://doi.org/10.31803/tg-20230416193006 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-37809 SN - 1848-5588 VL - 17 IS - 2 SP - 207 EP - 214 PB - University North CY - Koprivnica ER - TY - CHAP A1 - Mathias, Selvine George A1 - Schmied, Sebastian A1 - Großmann, Daniel T1 - Monitoring of discrete electrical signals from welding processes using data mining and IIoT approaches T2 - Proceedings, IEEE 32nd International Conference on Tools with Artificial Intelligence, (ICTAI 2020) UR - https://doi.org/10.1109/ICTAI50040.2020.00142 KW - electrical signals KW - clustering KW - kmeans KW - hierarchical KW - time series KW - OPC UA KW - multi-label classification KW - metrics Y1 - 2020 UR - https://doi.org/10.1109/ICTAI50040.2020.00142 SN - 978-1-7281-9228-4 SP - 911 EP - 916 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Schmied, Sebastian A1 - Großmann, Daniel A1 - Mathias, Selvine George A1 - Mueller, Ralph T1 - An approach for aggregation and historicization of production entities in the graph T2 - Proceedings 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) UR - https://doi.org/10.1109/ETFA46521.2020.9211907 KW - information modelling KW - aggregation KW - graph database Y1 - 2020 UR - https://doi.org/10.1109/ETFA46521.2020.9211907 SN - 978-1-7281-8956-7 SP - 1107 EP - 1110 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Mueller, Ralph A1 - Großmann, Daniel A1 - Schmied, Sebastian A1 - Mathias, Selvine George T1 - Validation of dynamic interoperability and virtual commissioning of production equipment in early development stages T2 - Proceedings 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) UR - https://doi.org/10.1109/ETFA46521.2020.9211988 KW - virtual commissioning KW - information model KW - cyber physical system KW - digital twin KW - machine communication KW - design engineering process Y1 - 2020 UR - https://doi.org/10.1109/ETFA46521.2020.9211988 SN - 978-1-7281-8956-7 SP - 1159 EP - 1162 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Mathias, Selvine George A1 - Schmied, Sebastian A1 - Großmann, Daniel A1 - Mueller, Ralph A1 - Mroß, Björn T1 - A Compliance Testing Structure for Implementation of Industry Standards through OPC UA T2 - Proceedings 2020 25th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA) UR - https://doi.org/10.1109/ETFA46521.2020.9212119 KW - OPC UA KW - compliance testing KW - information models KW - servers KW - clients Y1 - 2020 UR - https://doi.org/10.1109/ETFA46521.2020.9212119 SN - 978-1-7281-8956-7 SP - 1091 EP - 1094 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Thakur, Akshay A1 - Beck, Robert A1 - Mostaghim, Sanaz A1 - Großmann, Daniel T1 - Machine Learning for evaluating Kaizens in Volkswagen Production System - An Industrial Case study T2 - Proceedings: 2020 IEEE 7th International Conference on Data Science and Advanced Analytics: DSAA 2020 UR - https://doi.org/10.1109/DSAA49011.2020.00114 KW - supervised machine learning KW - Kaizen KW - best practices evaluation KW - clustering KW - production system Y1 - 2020 UR - https://doi.org/10.1109/DSAA49011.2020.00114 SN - 978-1-7281-8206-3 SP - 781 EP - 782 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Schmied, Sebastian A1 - Großmann, Daniel A1 - Mathias, Selvine George A1 - Banerjee, Suprateek T1 - Vertical integration via dynamic aggregation of information in OPC UA T2 - Intelligent Information and Database Systems UR - https://doi.org/10.1007/978-981-15-3380-8_18 KW - OPC UA KW - interoperability KW - aggregation Y1 - 2020 UR - https://doi.org/10.1007/978-981-15-3380-8_18 SN - 978-981-15-3379-2 SN - 978-981-15-3380-8 SN - 1865-0929 SN - 1865-0937 N1 - Access to this content is enabled by Nationallizenz Ebooks Medicine SP - 204 EP - 215 PB - Springer CY - Singapur ER - TY - CHAP A1 - Kaspar, Manuel A1 - Muñoz Osorio, Juan D. A1 - Bock, Jürgen T1 - Sim2Real Transfer for Reinforcement Learning without Dynamics Randomization T2 - 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) UR - https://doi.org/10.1109/IROS45743.2020.9341260 KW - Reinforcement learning KW - Aerospace electronics KW - System identification KW - Task analysis KW - Intelligent robots Y1 - 2021 UR - https://doi.org/10.1109/IROS45743.2020.9341260 SN - 978-1-7281-6212-6 SN - 2153-0866 SP - 4383 EP - 4388 PB - IEEE CY - Piscataway (NJ) ER - TY - CHAP A1 - Mathias, Selvine George A1 - Mancha, Mathew John A1 - Großmann, Daniel A1 - Kujat, Bernd A1 - Schiebold, Kay T1 - Investigations on numerical techniques for detecting variations in acoustic emissions T2 - IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society UR - https://doi.org/10.1109/IECON48115.2021.9589074 KW - acoustic emissions KW - Gaussian mixture model KW - self-organizing map KW - comparison Y1 - 2021 UR - https://doi.org/10.1109/IECON48115.2021.9589074 SN - 978-1-6654-3554-3 PB - IEEE CY - Piscataway (NJ) ER - TY - CHAP A1 - Schmied, Sebastian A1 - Großmann, Daniel A1 - Mathias, Selvine George A1 - Mueller, Ralph T1 - An approach for an industrial information model management T2 - Proceedings, 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS) UR - https://doi.org/10.1109/ICPS48405.2020.9274751 KW - information modelling KW - cyber physical system KW - OPC UA Y1 - 2020 UR - https://doi.org/10.1109/ICPS48405.2020.9274751 SN - 978-1-7281-6389-5 SP - 402 EP - 405 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Zehbold, Cornelia ED - Fend, Lars ED - Hofmann, Jürgen T1 - Product Lifecycle Management (PLM) im Kontext von Industrie 4.0 T2 - Digitalisierung in Industrie-, Handels- und Dienstleistungsunternehmen UR - https://doi.org/10.1007/978-3-658-35950-8_4 Y1 - 2022 UR - https://doi.org/10.1007/978-3-658-35950-8_4 SN - 978-3-658-35949-2 SN - 978-3-658-35950-8 N1 - Access provided by Nationallizenz Ebooks Medicine SP - 93 EP - 111 PB - Springer Gabler CY - Wiesbaden ET - 3., überarbeitete und erweiterte Auflage ER - TY - CHAP A1 - Hecht, Dirk A1 - Hofbauer, Günter ED - Fend, Lars ED - Hofmann, Jürgen T1 - Digital Procurement T2 - Digitalisierung in Industrie-, Handels- und Dienstleistungsunternehmen UR - https://doi.org/10.1007/978-3-658-35950-8_7 Y1 - 2022 UR - https://doi.org/10.1007/978-3-658-35950-8_7 SN - 978-3-658-35949-2 SN - 978-3-658-35950-8 N1 - Access provided by Nationallizenz Ebooks Medicine SP - 147 EP - 176 PB - Springer Gabler CY - Wiesbaden ET - 3., überarbeitete und erweiterte Auflage ER - TY - CHAP A1 - Axmann, Bernhard A1 - Harmoko, Harmoko T1 - Robotic Process Automation: An Overview and Comparison to Other Technology in Industry 4.0 T2 - 2020 10th International Conference on Advanced Computer Information Technologies (ACIT): Conference Proceedings UR - https://doi.org/10.1109/ACIT49673.2020.9208907 KW - RPA KW - Robotic Process Automation KW - Office Automation Y1 - 2020 UR - https://doi.org/10.1109/ACIT49673.2020.9208907 SN - 978-1-7281-6760-2 SN - 978-1-7281-6759-6 SP - 559 EP - 562 PB - IEEE CY - Piscataway ER - TY - INPR A1 - Köcher, Aljosha A1 - Belyaev, Alexander A1 - Hermann, Jesko A1 - Bock, Jürgen A1 - Meixner, Kristof A1 - Volkmann, Magnus A1 - Winter, Michael A1 - Zimmermann, Patrick A1 - Grimm, Stephan A1 - Diedrich, Christian T1 - A Reference Model for Common Understanding of Capabilities and Skills in Manufacturing UR - https://doi.org/10.48550/arXiv.2209.09632 KW - capabilities KW - skill KW - services KW - resource functions KW - standardization Y1 - 2022 UR - https://doi.org/10.48550/arXiv.2209.09632 PB - arXiv CY - Ithaca ER - TY - JOUR A1 - Stieber, Simon A1 - Schröter, Niklas A1 - Fauster, Ewald A1 - Bender, Marcel A1 - Schiendorfer, Alexander A1 - Reif, Wolfgang T1 - Inferring material properties from FRP processes via sim-to-real learning JF - The International Journal of Advanced Manufacturing Technology N2 - Fiber reinforced polymers (FRP) provide favorable properties such as weight-specific strength and stiffness that are central for certain industries, such as aerospace or automotive manufacturing. Liquid composite molding (LCM) is a family of often employed, inexpensive, out-of-autoclave manufacturing techniques. Among them, resin transfer molding (RTM), offers a high degree of automation. Herein, textile preforms are saturated by a fluid polymer matrix in a closed mold.Both impregnation quality and level of fiber volume content are of crucial importance for the final part quality. We propose to simultaneously learn three major textile properties (fiber volume content and permeability in X and Y direction) presented as a three-dimensional map based on a sequence of camera images acquired in flow experiments and compare CNNs, ConvLSTMs, and Transformers. Moreover, we show how simulation-to-real transfer learning can improve a digital twin in FRP manufacturing, compared to simulation-only models and models based on sparse real data. The overall best metrics are: IOU 0.5031 and Accuracy 95.929 %, obtained by pretrained transformer models. UR - https://doi.org/10.1007/s00170-023-11509-8 KW - Sequence-to-Image Learning KW - Architecture comparison KW - FRP KW - LCM KW - Transfer Learning KW - Industry 4.0 KW - Digital Twin Y1 - 2022 UR - https://doi.org/10.1007/s00170-023-11509-8 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-32402 SN - 1433-3015 VL - 128 IS - 3-4 SP - 1517 EP - 1533 PB - Springer CY - London ER - TY - CHAP A1 - Gajek, Carola A1 - Schiendorfer, Alexander A1 - Reif, Wolfgang ED - Amini, Massih-Reza ED - Canu, Stéphane ED - Fischer, Asja ED - Guns, Tias ED - Kralj Novak, Petra ED - Tsoumakas, Grigorios T1 - A Recommendation System for CAD Assembly Modeling based on Graph Neural Networks T2 - Machine Learning and Knowledge Discovery in Databases: European Conference, ECML PKDD 2022, Proceedings, Part I UR - https://doi.org/10.1007/978-3-031-26387-3_28 KW - Graph Machine Learning KW - Recommendation KW - Computer-aided Design KW - AI-aided Design Y1 - 2023 UR - https://doi.org/10.1007/978-3-031-26387-3_28 SN - 978-3-031-26387-3 SN - 978-3-031-26386-6 SP - 457 EP - 473 PB - Springer CY - Cham ER - TY - CHAP A1 - Lodes, Lukas A1 - Schiendorfer, Alexander ED - Do, Phuc ED - Michau, Gabriel ED - Ezhilarasu, Cordelia T1 - Certainty Groups: A Practical Approach to Distinguish Confidence Levels in Neural Networks T2 - Proceedings of the European Conference of the PHM Society 2022 N2 - Machine Learning (ML), in particular classification with deep neural nets, can be applied to a variety of industrial tasks. It can augment established methods for controlling manufacturing processes such as statistical process control (SPC) to detect non-obvious patterns in high-dimensional input data. However, due to the widespread issue of model miscalibration in neural networks, there is a need for estimating the predictive uncertainty of these models. Many established approaches for uncertainty estimation output scores that are difficult to put into actionable insight. We therefore introduce the concept of certainty groups which distinguish the predictions of a neural network into the normal group and the certainty group. The certainty group contains only predictions with a very high accuracy that can be set up to 100%. We present an approach to compute these certainty groups and demonstrate our approach on two datasets from a PHM setting. UR - https://doi.org/10.36001/phme.2022.v7i1.3331 KW - machine Learning KW - classification KW - uncertainty KW - estimaton KW - neural network Y1 - 2022 UR - https://doi.org/10.36001/phme.2022.v7i1.3331 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-31307 SN - 978-1-936263-36-3 SP - 294 EP - 305 PB - PHM Society CY - State College ER - TY - CHAP A1 - Kampa, Thomas A1 - El-Ankah, Amer A1 - Großmann, Daniel ED - Dörksen, Helene ED - Scanzio, Stefano ED - Jasperneite, Jürgen ED - Wisniewski, Lukasz ED - Man, Kim Fung ED - Sauter, Thilo ED - Seno, Lucia ED - Trsek, Henning ED - Vyatkin, Valeriy T1 - High Availability for virtualized Programmable Logic Controllers with Hard Real-Time Requirements on Cloud Infrastructures T2 - 2023 IEEE 21st International Conference on Industrial Informatics (INDIN) UR - https://doi.org/10.1109/INDIN51400.2023.10218014 KW - RDMA KW - vPLC KW - state synchronization Y1 - 2023 UR - https://doi.org/10.1109/INDIN51400.2023.10218014 SN - 978-1-6654-9313-0 PB - IEEE CY - Piscataway ER - TY - CHAP A1 - Schropp, Theresa Constanze T1 - Historical development of strategic foresight T2 - Strategic Foresight UR - https://doi.org/10.4324/9781003302735-3 Y1 - 2023 UR - https://doi.org/10.4324/9781003302735-3 SN - 978-1-003-30273-5 SN - 978-1-032-29923-5 SN - 978-1-032-29921-1 SP - 11 EP - 19 PB - Routledge CY - London ER - TY - JOUR A1 - Wach, Bernhard A1 - Schwarz, Jan Oliver A1 - von Held, Felix T1 - Corporate foresight for the benefit of corporates' innovation climate JF - Futures & Foresight Science N2 - Corporate foresight (CF) can be considered a future‐oriented capability that incorporates perceiving and prospecting. Extant CF‐related studies tackle the CF−innovation relationship but do not provide details on how CF relates to innovation climate. As we assume that the innovation climate of companies is a relevant antecedent to innovation, we conduct a quantitative empirical study with 147 upper‐tier managers to investigate how CF and the respective training of managers relate to a corporate's innovation climate. Results show that strong perceiving and prospecting positively influence the innovation climate, whereby prospecting is of particular importance. Further, we find that training managers in future‐oriented capabilities is only under certain circumstances (i.e., low prospecting) beneficial to the innovation climate in companies. UR - https://doi.org/10.1002/ffo2.195 Y1 - 2024 UR - https://doi.org/10.1002/ffo2.195 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-51201 SN - 2573-5152 VL - 7 IS - 1 PB - Wiley CY - Hoboken ER - TY - CHAP A1 - Hohenadl, Tom A1 - Axmann, Bernhard A1 - Stummeyer, Christian ED - Di Ciccio, Claudio ED - Fdhila, Walid ED - Agostinelli, Simone ED - Amyot, Daniel ED - Leopold, Henrik ED - Krčál, Michal ED - Malinova Mandelburger, Monika ED - Polančič, Gregor ED - Tomičić-Pupek, Katarina ED - Gdowska, Katarzyna ED - Grisold, Thomas ED - Sliż, Piotr ED - Beerepoot, Iris ED - Gabryelczyk, Renata ED - Plattfaut, Ralf T1 - Decision-Making in Robotic Process Automation Programming and its Influence on Robotic Process Mining T2 - Business Process Management: Blockchain, Robotic Process Automation, Central and Eastern European, Educators and Industry Forum, BPM 2024 Blockchain, RPA, CEE, Educators and Industry Forum Krakow, Poland, September 1–6, 2024, Proceedings UR - https://doi.org/10.1007/978-3-031-70445-1_11 Y1 - 2024 UR - https://doi.org/10.1007/978-3-031-70445-1_11 SN - 978-3-031-70445-1 SN - 978-3-031-70444-4 SP - 169 EP - 184 PB - Springer CY - Cham ER -