TY - THES A1 - Ulrich, Michael T1 - Analyse verschiedener Channel-Strategien im Lebensmittelhandel unter Berücksichtigung der Distributionslogistik am Beispiel von Kulturpilzen. N2 - Eine nachhaltige Lebensmittelversorgung der wachsenden Bevölkerung ist ein zentrales Thema in der Lebensmittelbranche. Das derzeitige Umdenken der Menschen in Richtung Ressourcenschonung führt bereits zu einer Änderung der Ernährungsgewohnheiten. Die Lebensmittelproduzenten und -händler müssen auf diesen Wandel reagieren, um die Existenz ihres Unternehmens zu sichern. Hierfür sind vor allem strategische Anpassungen im Vertrieb notwendig, welcher die Hauptaufgabe besitzt, den Kontakt zwischen Kunden und Produzenten herzustellen und dadurch einen hohen Wert für den Erfolg des Unternehmens besitzt. Die vorliegende Bachelorarbeit beschäftigt sich mit der Analyse verschiedener Channel-Strategien im Lebensmittelhandel unter Berücksichtigung der Distributionspolitik. Als Beispiel wird der Handel mit Kulturpilzen die Arbeit begleiten, da sich diese aufgrund ihrer Nährstoffe und eines möglichen nachhaltigen Anbaus als fleischloses Nahrungsmittel für die Zukunft eigenen. Nicht zuletzt wegen der notwendig optimierten Distribution des leicht verderblichen Kulturpilzes wird dieser als Beispiel betrachtet. Um die Motivation der Arbeit zu begründen wird das aktuelle Verhalten der Abnehmer bzw. Konsumenten untersucht. Ein Schwerpunkt ist die Erläuterung der Distributionslogistik im Lebensmittelhandel von leicht verderblichen Lebensmitteln und daneben die Betrachtung der potenziellen Vertriebskanäle. Unter Bezugnahme der erlangten theoretischen Kenntnisse und sekundärstatistischen Materials werden die Channel-Strategien unter mehreren Gesichtspunkten analysiert. Dabei werden Handlungsempfehlungen für die Auswahl der Channel-Strategie im Lebensmittelhandel getroffen. Y1 - 2022 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-34308 CY - Ingolstadt ER - TY - CHAP A1 - Bergmiller, Peter A1 - Botsch, Michael A1 - Speth, Johannes A1 - Hofmann, Ulrich T1 - Vehicle rear detection in images with Generalized Radial-Basis-Function classifiers T2 - 2008 IEEE Intelligent Vehicles Symposium UR - https://doi.org/10.1109/IVS.2008.4621273 KW - driver information systems KW - expert systems KW - image classification KW - radial basis function networks Y1 - 2008 UR - https://doi.org/10.1109/IVS.2008.4621273 SN - 978-1-4244-2568-6 SN - 1931-0587 SP - 226 EP - 233 PB - IEEE CY - Piscataway ER - TY - JOUR A1 - Handwerker, Michael A1 - Kessler, Jörg A1 - Marzbani, Hormoz A1 - Tetzlaff, Ulrich T1 - Annealing of chopped and continuous fibre reinforced polyamide 6 produced by fused filament fabrication JF - Composites Part B: Engineering UR - https://doi.org/10.1016/j.compositesb.2021.109119 KW - Annealing KW - Fused filament fabrication KW - Continuous glass fiber KW - Polyamide 6 Y1 - 2021 UR - https://doi.org/10.1016/j.compositesb.2021.109119 SN - 1879-1069 VL - 2021 IS - 223 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Burger, Uli A1 - Franke, Florian A1 - Schwab, Michael A1 - Engleder, Alexander A1 - Eberth, Ulrich T1 - Evaluation of collisions with small unmanned aerial vehicles and their consequences to rotorcraft T2 - 75th Annual Vertical Flight Society Forum and Technology Display (FORUM 75): The Future of Vertical Flight, Volume 2 of 5 Y1 - 2019 UR - https://vtol.org/store/product/evaluation-of-collisions-with-small-unmanned-aerial-vehicles-and-their-consequences-to-rotorcraft-14552.cfm SN - 978-1-5108-8791-6 SP - 1294 EP - 1304 PB - Curran Associates CY - Red Hook ER - TY - JOUR A1 - Handwerker, Michael A1 - Kessler, Jörg A1 - Marzbani, Hormoz A1 - Tetzlaff, Ulrich T1 - Pressure and heat treatment of continuous fibre reinforced thermoplastics produced by fused filament fabrication JF - Progress in Additive Manufacturing N2 - Fused filament fabrication allows for the additive manufacturing of complex geometries without requiring moulds. However, due to large air voids and poor layer adhesion, the mechanical properties of parts manufactured using fused filament fabrication lag behind those of parts manufactured using conventional techniques. A previous study found that the tensile strength and Young’s modulus of such parts could be increased by a heat-treatment process. However, large air voids were still present after annealing. This study, therefore, investigates the influence of a post-pressure-treatment process on the mechanical performance and the air void ratio of continuous glass fibre-reinforced polyamide 6 in the directions perpendicular to the fibres. Without the treatment, Young’s modulus on the plane parallel to the printing bed is eight times higher than Young’s modulus perpendicular to it. Annealing at 1 MPa homogenises the material and leads to a significant increase of both the tensile strength (55 MPa) and Young’s modulus (5 GPa). Increasing the pressure to 3 MPa only slightly increases the mechanical performance, whereas a further increase to 6 MPa causes no significant changes. UR - https://doi.org/10.1007/s40964-022-00315-5 KW - Pressure treatment KW - Fused filament fabrication KW - Continuous glass fibre KW - Polyamide 6 Y1 - 2022 UR - https://doi.org/10.1007/s40964-022-00315-5 UR - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:573-31239 SN - 2363-9520 SN - 2363-9512 VL - 8 IS - 2 SP - 99 EP - 116 PB - Springer CY - Cham ER - TY - JOUR A1 - Schmid, Michael A1 - Vögele, Ulrich A1 - Endisch, Christian T1 - A novel matrix-vector-based framework for modeling and simulation of electric vehicle battery packs JF - Journal of Energy Storage UR - https://doi.org/10.1016/j.est.2020.101736 KW - Electric vehicle KW - Lithium-ion battery pack KW - Control-oriented modeling KW - Electro-thermal model KW - Fault diagnosis KW - Performance analysis Y1 - 2020 UR - https://doi.org/10.1016/j.est.2020.101736 SN - 2352-1538 VL - 2020 IS - 32 PB - Elsevier CY - Amsterdam ER -