TY - JOUR A1 - Volpato, Guilherme A1 - de Souza Pinto Pereira, Adriano A1 - Lemos, Georges A1 - Schmitt, Matthias A1 - Glatzel, Uwe A1 - Pyczak, Florian A1 - Tetzlaff, Ulrich A1 - Fredel, Márcio Celso T1 - Out-of-Equilibrium Formation of Ni3Ti η-Phase in Inconel X-750 Produced via Laser Powder Bed Fusion and Spark Plasma Sintering JF - Metallurgical and Materials Transactions A: Physical metallurgy and materials science UR - https://doi.org/10.1007/s11661-022-06946-1 Y1 - 2023 UR - https://doi.org/10.1007/s11661-022-06946-1 SN - 1073-5623 VL - 54 IS - 5 SP - 1924 EP - 1936 PB - Springer CY - Boston ER - TY - JOUR A1 - Volpato, Guilherme A1 - de Souza Pinto Pereira, Adriano A1 - Fredel, Márcio Celso A1 - Tetzlaff, Ulrich T1 - On the Development of a Heat Treatment for Inconel Alloy X-750 Produced Using Laser Powder Bed Fusion JF - Metallurgical and Materials Transactions A: Physical metallurgy and materials science UR - https://doi.org/10.1007/s11661-024-07589-0 Y1 - 2024 UR - https://doi.org/10.1007/s11661-024-07589-0 SN - 1073-5623 VL - 55 IS - 11 SP - 4585 EP - 4599 PB - Springer CY - Boston ER - TY - CHAP A1 - Kubaschinski, Paul A1 - Baruth, Albin A1 - Tetzlaff, Ulrich A1 - Altenbach, Holm A1 - Waltz, Manuela T1 - Untersuchungen zur Ermittlung der zyklischen Kennwerte von dünnem Elektroblech im Rahmen der rechnerischen Lebensdauerabschätzung T2 - Betriebsfestigkeit - Wissensmanagement und Methodenentwicklung entlang der Wertschöpfungskette UR - https://doi.org/10.48447/BF-2022-014 KW - cyclic material properties KW - notch strain approach KW - electrical steel KW - fatigue strength Y1 - 2022 UR - https://doi.org/10.48447/BF-2022-014 SP - 163 EP - 178 PB - DVM CY - Berlin ER - TY - CHAP A1 - Keim, Simon A1 - Tetzlaff, Ulrich A1 - Elger, Gordon T1 - The influence of different-sized Ni micro- and nanopowders on the processing and microstructural properties of Sn-Ag-Cu-solder with low Ag content T2 - Proceedings: IEEE 70th Electronic Components and Technology Conference, ECTC 2020 UR - https://doi.org/10.1109/ECTC32862.2020.00312 KW - Composites KW - Soldering KW - Porosity KW - Microstructure KW - Intermetallics KW - Phase interfaces Y1 - 2020 UR - https://doi.org/10.1109/ECTC32862.2020.00312 SN - 978-1-7281-6180-8 SN - 2377-5726 SP - 2005 EP - 2012 PB - IEEE CY - Piscataway ER - TY - JOUR A1 - Bhogaraju, Sri Krishna A1 - Conti, Fosca A1 - Kotadia, Hiren R. A1 - Keim, Simon A1 - Tetzlaff, Ulrich A1 - Elger, Gordon T1 - Novel approach to copper sintering using surface enhanced brass micro flakes for microelectronics packaging JF - Journal of Alloys and Compounds UR - https://doi.org/10.1016/j.jallcom.2020.156043 KW - Metals and alloys KW - Microstructure KW - Surfaces and interfaces KW - Sintering Y1 - 2020 UR - https://doi.org/10.1016/j.jallcom.2020.156043 SN - 1873-4669 VL - 2020 IS - 844 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Mokhtari, Omid A1 - Conti, Fosca A1 - Bhogaraju, Sri Krishna A1 - Meier, Markus A1 - Schweigart, Helmut A1 - Tetzlaff, Ulrich A1 - Elger, Gordon T1 - Characterization of tin-oxides and tin-formate crystals obtained from SnAgCu solder alloy under formic acid vapor JF - New Journal of Chemistry UR - https://doi.org/10.1039/C9NJ02135C Y1 - 2019 UR - https://doi.org/10.1039/C9NJ02135C SN - 1369-9261 VL - 43 IS - 26 SP - 10227 EP - 10231 PB - RSC CY - London ER - TY - JOUR A1 - Thambi, Joel Luther A1 - Schiessl, Andreas A1 - Waltz, Manuela A1 - Lang, Klaus-Dieter A1 - Tetzlaff, Ulrich T1 - Modified Constitutive Creep Laws With Micromechanical Modeling of Pb-Free Solder Alloys JF - Journal of Electronic Packaging UR - https://doi.org/10.1115/1.4035850 KW - failure analysis KW - harsh environment KW - microsystems KW - physics of failure KW - reliability KW - SMT KW - solder KW - thermal analysis Y1 - 2017 UR - https://doi.org/10.1115/1.4035850 SN - 1528-9044 SN - 1043-7398 VL - 139 IS - 3 PB - The American Society of Mechanical Engineers CY - New York ER - TY - JOUR A1 - Thambi, Joel Luther A1 - Tetzlaff, Ulrich A1 - Schiessl, Andreas A1 - Lang, Klaus-Dieter A1 - Waltz, Manuela T1 - High cycle fatigue behaviour and generalized fatigue model development of lead-free solder alloy based on local stress approach JF - Microelectronics Reliability UR - https://doi.org/10.1016/j.microrel.2016.10.004 KW - Sn3.8Ag0.7Cu (SAC) KW - high cycle fatigue KW - local stress KW - FKM guideline KW - cyclic softening KW - stress concentration KW - roughness KW - mean stress KW - solder joint KW - surface mount technology (SMT) KW - stress KW - experimental analysis KW - vibration Y1 - 2016 UR - https://doi.org/10.1016/j.microrel.2016.10.004 SN - 0026-2714 IS - 66 SP - 98 EP - 105 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Corrêa da Silva, Cauê A1 - Volpato, Guilherme A1 - Fredel, Márcio Celso A1 - Tetzlaff, Ulrich T1 - Low-pressure processing and microstructural evaluation of unidirectional carbon fiber-reinforced aluminum-nickel matrix composites JF - Journal of Materials Processing Technology UR - https://doi.org/10.1016/j.jmatprotec.2019.01.032 KW - Aluminum matrix composites KW - Carbon fibers KW - Composite processing KW - Intermetallics KW - Casting Y1 - 2019 UR - https://doi.org/10.1016/j.jmatprotec.2019.01.032 SN - 0924-0136 VL - 2019 IS - 269 SP - 10 EP - 15 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Volpato, Guilherme A1 - Fredel, Márcio Celso A1 - Tetzlaff, Ulrich T1 - Dry Sliding Wear and Fe Contamination of Investment-cast SiC Foam Reinforced Aluminum Matrix Composites T2 - EuroBrake 2019 Conference Proceedings Y1 - 2019 SN - 978-0-9572076-3-9 PB - FISITA CY - Bishops Stortford ER - TY - JOUR A1 - Lemos, Georges A1 - Fredel, Márcio Celso A1 - Pyczak, Florian A1 - Tetzlaff, Ulrich T1 - Influence of distinct manufacturing processes on the microstructure of Ni-based metal matrix composites submitted to long thermal exposure JF - Key Engineering Materials UR - https://doi.org/10.4028/www.scientific.net/KEM.809.79 KW - MMC KW - particle reinforcement KW - TiC KW - isothermal aging KW - superalloy KW - Inconel X-750 Y1 - 2019 UR - https://doi.org/10.4028/www.scientific.net/KEM.809.79 SN - 1662-9795 VL - 2019 IS - 809 SP - 79 EP - 86 PB - Trans Tech Publications CY - Baech ER - TY - CHAP A1 - Gulden, Florian A1 - Reinhold, B. A1 - Gramstat, Sebastian A1 - Tetzlaff, Ulrich A1 - Höppel, Heinz Werner ED - Pfeffer, Peter E. T1 - Investigation of the run-in and corrosion behavior of a PEO-coated aluminum brake disc T2 - 10th International Munich Chassis Symposium 2019: chassis.tech plus UR - https://doi.org/10.1007/978-3-658-26435-2_43 Y1 - 2019 UR - https://doi.org/10.1007/978-3-658-26435-2_43 SN - 978-3-658-26435-2 SN - 978-3-658-26434-5 SP - 611 EP - 631 PB - Springer Vieweg CY - Wiesbaden ER - TY - CHAP A1 - Gulden, Florian A1 - Stich, Anton A1 - Gramstat, Sebastian A1 - Höppel, Heinz Werner A1 - Tetzlaff, Ulrich T1 - Investigations of the third body using pin-on-disc and brake dynamometer on all-MMC brake rotors T2 - EuroBrake 2018 Conference Proceedings Y1 - 2018 SN - 978-1-5108-7963-8 SP - 401 EP - 407 PB - FISITA CY - Bishops Stortford ER - TY - JOUR A1 - Benedet Dutra, Gabriel A1 - Tetzlaff, Ulrich A1 - Vieira da Cunha, Tiago A1 - dos Santos, Carlos Eduardo A1 - Lemos, Georges T1 - Microstructural Characterization of an ERNiCrMo-3 and Grey Cast Iron Interface Obtained via TIG Welding JF - Metallurgical and Materials Transactions B UR - https://doi.org/10.1007/s11663-022-02549-8 Y1 - 2022 UR - https://doi.org/10.1007/s11663-022-02549-8 SN - 1073-5615 VL - 53 IS - 4 SP - 2534 EP - 2546 PB - Springer Nature CY - Cham ER - TY - JOUR A1 - Handwerker, Michael A1 - Kessler, Jörg A1 - Marzbani, Hormoz A1 - Tetzlaff, Ulrich T1 - Annealing of chopped and continuous fibre reinforced polyamide 6 produced by fused filament fabrication JF - Composites Part B: Engineering UR - https://doi.org/10.1016/j.compositesb.2021.109119 KW - Annealing KW - Fused filament fabrication KW - Continuous glass fiber KW - Polyamide 6 Y1 - 2021 UR - https://doi.org/10.1016/j.compositesb.2021.109119 SN - 1879-1069 VL - 2021 IS - 223 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Thambi, Joel Luther A1 - Tetzlaff, Ulrich A1 - Schiessl, Andreas A1 - Lang, Klaus-Dieter A1 - Waltz, Manuela T1 - Evaluation of the relationship between stress and lifetime of Pb-free solder joints subjected to vibration load using a generalized local stress approach JF - Microelectronics Reliability UR - https://doi.org/10.1016/j.microrel.2019.113560 KW - SnAgCu KW - High cycle fatigue (HCF) KW - Local stress KW - FKM guideline KW - Stress gradient KW - Roughness KW - Solder alloys KW - Experimental analysis KW - FEA KW - Surface mount technology (SMT) KW - Vibration KW - Harmonic frequency KW - Bulk solder KW - Fatigue KW - Durability KW - Solder joint failure KW - Component testing KW - Material characterisation KW - Chip capacitor KW - Transformer Y1 - 2020 UR - https://doi.org/10.1016/j.microrel.2019.113560 SN - 0026-2714 VL - 2020 IS - 106 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Tetzlaff, Ulrich A1 - Gerber, Alexander A1 - Amelang, Rudolf A1 - Lemos, Georges T1 - Investigation of the Creep Resistance of a Spray-Compacted Si-Particle Reinforced Al-Based MMC (Dispal® S270) JF - Key Engineering Materials UR - https://doi.org/10.4028/www.scientific.net/KEM.809.87 KW - Creep resistance KW - MMC KW - particle reinforcement KW - multi-phase KW - microstructure analysis Y1 - 2019 UR - https://doi.org/10.4028/www.scientific.net/KEM.809.87 SN - 1662-9795 VL - 2019 IS - 809 SP - 87 EP - 93 PB - Trans Tech Publications CY - Baech ER - TY - JOUR A1 - Kiehl, Maximilian A1 - Scheid, Adriano A1 - Graf, Karin A1 - Ernst, Benedikt A1 - Tetzlaff, Ulrich T1 - Coaxial laser cladding of cobalt-base alloy Stellite™ 6 on gray cast iron/investigations on friction, wear versus commercial brake pad, and corrosion characteristics JF - Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering UR - https://doi.org/10.1177/09544070221145512 Y1 - 2023 UR - https://doi.org/10.1177/09544070221145512 SN - 2041-2991 SN - 0954-4070 VL - 237 IS - 14 SP - 3285 EP - 3303 PB - Sage CY - London ER - TY - JOUR A1 - Ernst, Benedikt A1 - Keim, Simon A1 - Tetzlaff, Ulrich T1 - On the anisotropic indentation modulus and anisotropic creep behavior of β-Sn characterized by nanoindentation methods JF - Materials Science and Engineering: A UR - https://doi.org/10.1016/j.msea.2022.143392 Y1 - 2022 UR - https://doi.org/10.1016/j.msea.2022.143392 SN - 1873-4936 SN - 0921-5093 VL - 2022 IS - 848 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Lemos, Georges A1 - Fredel, Márcio Celso A1 - Pyczak, Florian A1 - Tetzlaff, Ulrich T1 - Creep resistance improvement of a polycrystalline Ni-based superalloy via TiC particles reinforcement JF - Materials Science and Engineering: A UR - https://doi.org/10.1016/j.msea.2022.143821 Y1 - 2022 UR - https://doi.org/10.1016/j.msea.2022.143821 SN - 1873-4936 SN - 0921-5093 VL - 2022 IS - 854 PB - Elsevier CY - Amsterdam ER -