<?xml version="1.0" encoding="utf-8"?>
<export-example>
  <doc>
    <id>4859</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>23</pageNumber>
    <edition/>
    <issue>11</issue>
    <volume>16</volume>
    <articleNumber>1576</articleNumber>
    <type>article</type>
    <publisherName>MDPI</publisherName>
    <publisherPlace>Basel</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>2024-07-05</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Mechanical Properties of Raw Filaments and Printed Specimens: Effects of Fiber Reinforcements and Process Parameters</title>
    <abstract language="eng">Fused Deposition Modeling (FDM) is a well-established manufacturing method for producing both prototype and functional components. This study investigates the mechanical properties of FDM components by material and process-related influencing variables. Tensile tests were conducted on seven different materials in their raw filament form, two of which were fiber-reinforced, to analyze their material-related influence. To cover a wide range from standard to advanced materials relevant for load-carrying components as well as their respective variations, polylactic acid (PLA), 30% wood-fiber-reinforced PLA, acrylonitrile butadiene styrene (ABS), polycarbonate (PC), a blend of ABS and PC, Nylon, and 30% glass-fiber-reinforced Nylon were selected. The process-related influencing variables were studied using the following process parameters: layer thickness, nozzle diameter, build orientation, nozzle temperature, infill density and pattern, and raster angle. The first test series revealed that the addition of wood fibers significantly worsened the mechanical behavior of PLA due to the lack of fiber bonding to the matrix and significant pore formation. The polymer blend of ABS and PC only showed improvements in stiffness. Significant strength and stiffness improvements were found by embedding glass fibers in Nylon, despite partially poor fiber–matrix bonding. The materials with the best properties were selected for the process parameter analysis. When examining the impact of layer thickness on part strength, a clear correlation was evident. Smaller layer thicknesses resulted in higher strength, while stiffness did not appear to be affected. Conversely, larger nozzle diameters and lower nozzle temperatures only positively impacted stiffness, with little effect on strength. The part orientation did alter the fracture behavior of the test specimens. Although an on-edge orientation resulted in higher stiffness, it failed at lower stresses. Higher infill densities and infill patterns aligned with the load direction led to the best mechanical results. The raster angle had a significant impact on the behavior of the printed bodies. An alternating raster angle resulted in lower strengths and stiffness compared to a unidirectional raster angle. However, it also caused significant stretching due to the rotation of the beads.</abstract>
    <parentTitle language="eng">Polymers</parentTitle>
    <identifier type="issn">2073-4360</identifier>
    <identifier type="urn">urn:nbn:de:bvb:573-48595</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="opus_import_data">{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2024,6,4]],"date-time":"2024-06-04T00:23:16Z","timestamp":1717460596632},"reference-count":35,"publisher":"MDPI AG","issue":"11","license":[{"start":{"date-parts":[[2024,6,2]],"date-time":"2024-06-02T00:00:00Z","timestamp":1717286400000},"content-version":"vor","delay-in-days":0,"URL":"https:\/\/creativecommons.org\/licenses\/by\/4.0\/"}],"funder":[{"name":"Faculty of Mechanical Engineering at the Technische Hochschule Ingolstadt"},{"name":"central publication fund of the Technische Hochschule Ingolstadt"},{"name":"CARISSMA Institute of Electric, Connected, and Secure Mobility"}],"content-domain":{"domain":[],"crossmark-restriction":false},"short-container-title":["Polymers"],"abstract":"&lt;jats:p&gt;Fused Deposition Modeling (FDM) is a well-established manufacturing method for producing both prototype and functional components. This study investigates the mechanical properties of FDM components by material and process-related influencing variables. Tensile tests were conducted on seven different materials in their raw filament form, two of which were fiber-reinforced, to analyze their material-related influence. To cover a wide range from standard to advanced materials relevant for load-carrying components as well as their respective variations, polylactic acid (PLA), 30% wood-fiber-reinforced PLA, acrylonitrile butadiene styrene (ABS), polycarbonate (PC), a blend of ABS and PC, Nylon, and 30% glass-fiber-reinforced Nylon were selected. The process-related influencing variables were studied using the following process parameters: layer thickness, nozzle diameter, build orientation, nozzle temperature, infill density and pattern, and raster angle. The first test series revealed that the addition of wood fibers significantly worsened the mechanical behavior of PLA due to the lack of fiber bonding to the matrix and significant pore formation. The polymer blend of ABS and PC only showed improvements in stiffness. Significant strength and stiffness improvements were found by embedding glass fibers in Nylon, despite partially poor fiber\u2013matrix bonding. The materials with the best properties were selected for the process parameter analysis. When examining the impact of layer thickness on part strength, a clear correlation was evident. Smaller layer thicknesses resulted in higher strength, while stiffness did not appear to be affected. Conversely, larger nozzle diameters and lower nozzle temperatures only positively impacted stiffness, with little effect on strength. The part orientation did alter the fracture behavior of the test specimens. Although an on-edge orientation resulted in higher stiffness, it failed at lower stresses. Higher infill densities and infill patterns aligned with the load direction led to the best mechanical results. The raster angle had a significant impact on the behavior of the printed bodies. An alternating raster angle resulted in lower strengths and stiffness compared to a unidirectional raster angle. However, it also caused significant stretching due to the rotation of the beads.&lt;\/jats:p&gt;","DOI":"10.3390\/polym16111576","type":"journal-article","created":{"date-parts":[[2024,6,3]],"date-time":"2024-06-03T07:51:45Z","timestamp":1717401105000},"page":"1576","source":"Crossref","is-referenced-by-count":0,"title":["Mechanical Properties of Raw Filaments and Printed Specimens: Effects of Fiber Reinforcements and Process Parameters"],"prefix":"10.3390","volume":"16","author":[{"ORCID":"http:\/\/orcid.org\/0009-0001-8382-5598","authenticated-orcid":false,"given":"Daniel","family":"Vieweger","sequence":"first","affiliation":[{"name":"CARISSMA Institute of Electric, Connected, and Secure Mobility (C-ECOS), Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-3443-0765","authenticated-orcid":false,"given":"Sergej","family":"Diel","sequence":"additional","affiliation":[{"name":"CARISSMA Institute of Electric, Connected, and Secure Mobility (C-ECOS), Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-0184-1322","authenticated-orcid":false,"given":"Hans-Georg","family":"Schweiger","sequence":"additional","affiliation":[{"name":"CARISSMA Institute of Electric, Connected, and Secure Mobility (C-ECOS), Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-1828-2889","authenticated-orcid":false,"given":"Ulrich","family":"Tetzlaff","sequence":"additional","affiliation":[{"name":"Faculty of Mechanical Engineering, Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany"}]}],"member":"1968","published-online":{"date-parts":[[2024,6,2]]},"reference":[{"key":"ref_1","doi-asserted-by":"crossref","unstructured":"Dave, H.K., and Davim, J.P. (2021). Fused Deposition Modeling Based 3D Printing, Springer International Publishing.","DOI":"10.1007\/978-3-030-68024-4"},{"key":"ref_2","doi-asserted-by":"crossref","unstructured":"Dey, A., and Yodo, N. (2019). A Systematic Survey of FDM Process Parameter Optimization and Their Influence on Part Characteristics. JMMP, 3.","DOI":"10.3390\/jmmp3030064"},{"key":"ref_3","doi-asserted-by":"crossref","unstructured":"Algarni, M., and Ghazali, S. (2021). Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG\u2019s Mechanical Properties to FDM Printing Process Parameters. Crystals, 11.","DOI":"10.3390\/cryst11080995"},{"key":"ref_4","doi-asserted-by":"crossref","first-page":"144","DOI":"10.1016\/j.compscitech.2014.10.009","article-title":"Highly oriented carbon fiber\u2013polymer composites via additive manufacturing","volume":"105","author":"Tekinalp","year":"2014","journal-title":"Compos. Sci. Technol."},{"key":"ref_5","doi-asserted-by":"crossref","unstructured":"Gibson, I., Rosen, D., Stucker, B., and Khorasani, M. (2021). Additive Manufacturing Technologies, Springer International Publishing.","DOI":"10.1007\/978-3-030-56127-7"},{"key":"ref_6","doi-asserted-by":"crossref","first-page":"3769","DOI":"10.1007\/s00170-019-03627-z","article-title":"A design framework for additive manufacturing","volume":"103","author":"Bikas","year":"2019","journal-title":"Int. J. Adv. Manuf. Technol."},{"key":"ref_7","unstructured":"Knoop, F. (2020). Untersuchung der Mechanischen und Geometrischen Eigenschaften von Bauteilen Hergestellt im Fused Deposition Modeling Verfahren. [Ph.D. Thesis, Shaker Verlag]."},{"key":"ref_8","doi-asserted-by":"crossref","first-page":"143","DOI":"10.1016\/j.matdes.2017.03.065","article-title":"Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection","volume":"124","author":"Caminero","year":"2017","journal-title":"Mater. Des."},{"key":"ref_9","unstructured":"Kloke, A. (2016). Untersuchung der Werkstoff-, Prozess- und Bauteileigenschaften beim Fused Deposition Modeling Verfahren. [Ph.D. Thesis, Shaker Verlag]."},{"key":"ref_10","doi-asserted-by":"crossref","first-page":"169","DOI":"10.1007\/s11665-018-3784-x","article-title":"Experimental Investigations for Optimizing the Extrusion Parameters on FDM PLA Printed Parts","volume":"28","author":"Yang","year":"2019","journal-title":"J. Mater. Eng. Perform."},{"key":"ref_11","first-page":"31","article-title":"Influence of the Printing Nozzle Diameter on Tensile Strength of Produced 3D Models in FDM Technology","volume":"24","author":"Pietkiewicz","year":"2020","journal-title":"Agric. Eng."},{"key":"ref_12","doi-asserted-by":"crossref","first-page":"120","DOI":"10.1002\/pen.24875","article-title":"Study of processing parameters in fused deposition modeling based on mechanical properties of acrylonitrile-butadiene-styrene filament","volume":"59","author":"Huang","year":"2019","journal-title":"Polym. Eng. Sci."},{"key":"ref_13","doi-asserted-by":"crossref","first-page":"791","DOI":"10.1016\/j.promfg.2017.07.079","article-title":"Experimental Optimization of Fused Deposition Modelling Processing Parameters: A Design-for-Manufacturing Approach","volume":"10","author":"Alafaghani","year":"2017","journal-title":"Procedia Manuf."},{"key":"ref_14","doi-asserted-by":"crossref","first-page":"287","DOI":"10.1016\/j.matdes.2009.06.016","article-title":"Parametric appraisal of mechanical property of fused deposition modelling processed parts","volume":"31","author":"Sood","year":"2010","journal-title":"Mater. Des."},{"key":"ref_15","doi-asserted-by":"crossref","first-page":"107562","DOI":"10.1016\/j.compositesb.2019.107562","article-title":"Controlling toughness and strength of FDM 3D-printed PLA components through the raster layup","volume":"180","author":"Kiendl","year":"2020","journal-title":"Compos. Part. B Eng."},{"key":"ref_16","first-page":"284","article-title":"Optimization of fused deposition modeling parameters for improved PLA and ABS 3D printed structures","volume":"3","author":"Abeykoon","year":"2020","journal-title":"Int. J. Lightweight Mater. Manuf."},{"key":"ref_17","unstructured":"Harpool, T.D. (2016). Observing the Effect of Infill Shapes on the Tensile Characteristics of 3D Printed Plastic Parts. [Ph.D. Thesis, Wichita State University]."},{"key":"ref_18","doi-asserted-by":"crossref","first-page":"1312","DOI":"10.1007\/s12540-019-00272-9","article-title":"3D Printed Parts with Honeycomb Internal Pattern by Fused Deposition Modelling; Experimental Characterization and Production Optimization","volume":"25","author":"Moradi","year":"2019","journal-title":"Met. Mater. Int."},{"key":"ref_19","doi-asserted-by":"crossref","unstructured":"Calignano, F., Lorusso, M., Roppolo, I., and Minetola, P. (2020). Investigation of the Mechanical Properties of a Carbon Fibre-Reinforced Nylon Filament for 3D Printing. Machines, 8.","DOI":"10.3390\/machines8030052"},{"key":"ref_20","unstructured":"Rahmatabadi, D., Aminzadeh, A., Aberoumand, M., and Moradi, M. (2021). Fused Deposition Modeling Based 3D Printing: Materials Forming, Machining and Tribology, Springer International Publishing."},{"key":"ref_21","doi-asserted-by":"crossref","first-page":"979","DOI":"10.1002\/pen.25353","article-title":"An Experimental Study of Nozzle Temperature and Heat Treatment (Annealing) Effects on Mechanical Properties of High-Temperature Polylactic Acid in Fused Deposition Modeling","volume":"60","author":"Akhoundi","year":"2020","journal-title":"Polym. Eng. Sci."},{"key":"ref_22","doi-asserted-by":"crossref","first-page":"107667","DOI":"10.1016\/j.resconrec.2024.107667","article-title":"Circular economy innovation: A deep investigation on 3D printing of industrial waste polypropylene and carbon fibre composites","volume":"206","author":"Ghabezi","year":"2024","journal-title":"Resour. Conserv. Recycl."},{"key":"ref_23","doi-asserted-by":"crossref","unstructured":"Nikam, M., Pawar, P., Patil, A., Patil, A., Mokal, K., and Jadhav, S. (2023). Sustainable fabrication of 3D printing filament from recycled PET plastic. Mater. Today Proc., in press.","DOI":"10.1016\/j.matpr.2023.08.205"},{"key":"ref_24","unstructured":"Prusa Research (2023, February 08). Prusament PLA. Available online: https:\/\/prusament.com\/materials\/pla\/."},{"key":"ref_25","unstructured":"Prusa Research (2023, February 08). ColorFabb Woodfill Filament 600 g. Available online: https:\/\/www.prusa3d.com\/product\/colorfabb-woodfill-filament-600g\/."},{"key":"ref_26","unstructured":"UltiMaker (2023, February 10). UltiMaker ABS TDS. Available online: https:\/\/support.ultimaker.com\/s\/article\/1667410781022."},{"key":"ref_27","unstructured":"Polymaker (2023, February 10). PolyMax\u2122 PC. Available online: https:\/\/polymaker.com\/product\/polymax-pc\/."},{"key":"ref_28","unstructured":"Formfutura (2023, February 13). ABSpro Flame Retardant. Available online: https:\/\/formfutura.com\/product\/abspro-flame-retardant\/."},{"key":"ref_29","unstructured":"(2023, February 14). add:north. Adura\u2122-Grey. Available online: https:\/\/addnorth.com\/product\/Adura%E2%84%A2\/Adura%E2%84%A2%20-%202.85mm%20-%20500g%20-%20Grey."},{"key":"ref_30","unstructured":"3DXTECH (2023, February 08). FibreX\u2122 Nylon+GF30 3D Filament|Glass Fiber Reinforced. Available online: https:\/\/www.3dxtech.com\/product\/fibrex-nylon-gf30\/."},{"key":"ref_31","unstructured":"(2019). Plastics-Determination of Tensile Properties\u2014Part 3: Test Conditions for Films and Sheets (Standard No. DIN EN ISO 527-3:2019-02)."},{"key":"ref_32","unstructured":"(2012). Plastics-Determination of Tensile Properties\u2014Part 2: Test Conditions for Moulding and Extrusion Plastics (Standard No. DIN EN ISO 527-2:2012-06)."},{"key":"ref_33","unstructured":"(2022). Plastics-Determination of Tensile Properties\u2014Part 4: Test Conditions for Isotropic and Orthotropic Fibre-Reinforced Plastic Composites (Standard No. DIN EN ISO 527-4:2022-03)."},{"key":"ref_34","doi-asserted-by":"crossref","first-page":"1204","DOI":"10.1007\/s10924-020-01677-z","article-title":"The Influence of Wood and Basalt Fibres on Mechanical, Thermal and Hydrothermal Properties of PLA Composites","volume":"28","author":"Kuciel","year":"2020","journal-title":"J. Polym. Env."},{"key":"ref_35","unstructured":"Gibson, L.J., and Ashby, M.F. (2010). Cellular Solids: Structure and Properties, Cambridge University Press. [2nd ed.]. 1. paperback ed. (with corr.),  Transferred to Digital Print."}],"container-title":["Polymers"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/www.mdpi.com\/2073-4360\/16\/11\/1576\/pdf","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2024,6,3]],"date-time":"2024-06-03T08:18:52Z","timestamp":1717402732000},"score":1,"resource":{"primary":{"URL":"https:\/\/www.mdpi.com\/2073-4360\/16\/11\/1576"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2024,6,2]]},"references-count":35,"journal-issue":{"issue":"11","published-online":{"date-parts":[[2024,6]]}},"alternative-id":["polym16111576"],"URL":"http:\/\/dx.doi.org\/10.3390\/polym16111576","relation":{},"ISSN":["2073-4360"],"issn-type":[{"value":"2073-4360","type":"electronic"}],"subject":[],"published":{"date-parts":[[2024,6,2]]}}}</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="local_crossrefLicence">https://creativecommons.org/licenses/by/4.0/</enrichment>
    <enrichment key="local_import_origin">crossref</enrichment>
    <enrichment key="local_doiImportPopulated">PersonAuthorFirstName_1,PersonAuthorLastName_1,PersonAuthorIdentifierOrcid_1,PersonAuthorFirstName_2,PersonAuthorLastName_2,PersonAuthorIdentifierOrcid_2,PersonAuthorFirstName_3,PersonAuthorLastName_3,PersonAuthorIdentifierOrcid_3,PersonAuthorFirstName_4,PersonAuthorLastName_4,PersonAuthorIdentifierOrcid_4,PublisherName,TitleMain_1,Language,TitleAbstract_1,TitleParent_1,ArticleNumber,Issue,Volume,CompletedYear,IdentifierIssn,Enrichmentlocal_crossrefLicence</enrichment>
    <enrichment key="opus.source">doi-import</enrichment>
    <enrichment key="THI_articleversion">published</enrichment>
    <enrichment key="THI_openaccess">ja</enrichment>
    <enrichment key="THI_relatedIdentifier">https://doi.org/10.3390/polym16111576</enrichment>
    <enrichment key="THI_review">peer-review</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <licence>Creative Commons BY 4.0</licence>
    <author>
      <first_name>Daniel</first_name>
      <last_name>Vieweger</last_name>
    </author>
    <author>
      <first_name>Sergej</first_name>
      <last_name>Diel</last_name>
    </author>
    <author>
      <first_name>Hans-Georg</first_name>
      <last_name>Schweiger</last_name>
    </author>
    <author>
      <first_name>Ulrich</first_name>
      <last_name>Tetzlaff</last_name>
    </author>
    <collection role="institutes" number="15985">Fakultät Maschinenbau</collection>
    <collection role="open_access" number="">open_access</collection>
    <collection role="institutes" number="19311">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="institutes" number="19319">CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS)</collection>
    <collection role="persons" number="26111">Schweiger, Hans-Georg</collection>
    <collection role="persons" number="26484">Tetzlaff, Ulrich</collection>
    <collection role="persons" number="26446">Diel, Sergej</collection>
    <thesisPublisher>Technische Hochschule Ingolstadt</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-haw/files/4859/polymers-16-01576.pdf</file>
  </doc>
  <doc>
    <id>5577</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>7</pageNumber>
    <edition/>
    <issue/>
    <volume/>
    <articleNumber/>
    <type>conferenceobject</type>
    <publisherName>IEEE</publisherName>
    <publisherPlace>Piscataway</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>2025-01-24</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Characterization and modeling of the swelling behavior of a LiFePO4 pouch cell in multiple operating conditions</title>
    <parentTitle language="eng">2024 IEEE Vehicle Power and Propulsion Conference (VPPC), Proceedings</parentTitle>
    <identifier type="isbn">979-8-3315-4160-6</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="opus_import_data">{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2025,1,11]],"date-time":"2025-01-11T05:32:46Z","timestamp":1736573566725,"version":"3.32.0"},"reference-count":10,"publisher":"IEEE","license":[{"start":{"date-parts":[[2024,10,7]],"date-time":"2024-10-07T00:00:00Z","timestamp":1728259200000},"content-version":"stm-asf","delay-in-days":0,"URL":"https:\/\/doi.org\/10.15223\/policy-029"},{"start":{"date-parts":[[2024,10,7]],"date-time":"2024-10-07T00:00:00Z","timestamp":1728259200000},"content-version":"stm-asf","delay-in-days":0,"URL":"https:\/\/doi.org\/10.15223\/policy-037"}],"content-domain":{"domain":[],"crossmark-restriction":false},"short-container-title":[],"published-print":{"date-parts":[[2024,10,7]]},"DOI":"10.1109\/vppc63154.2024.10755252","type":"proceedings-article","created":{"date-parts":[[2024,11,20]],"date-time":"2024-11-20T18:58:08Z","timestamp":1732129088000},"page":"1-7","source":"Crossref","is-referenced-by-count":0,"title":["Characterization and modeling of the swelling behavior of a LiFePO&lt;sub&gt;4&lt;\/sub&gt; pouch cell in multiple operating conditions"],"prefix":"10.1109","author":[{"given":"Daniel","family":"Koch","sequence":"first","affiliation":[{"name":"CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS),Technische Hochschule Ingolstadt,Ingolstadt,Germany"}]},{"given":"Murillo","family":"Stein","sequence":"additional","affiliation":[{"name":"Universidade Federal de Santa Catarina,Mechanical Engineering Department,Florian&amp;#x00F3;polis,Brazil"}]},{"given":"Samuel Luna","family":"de Abreu","sequence":"additional","affiliation":[{"name":"Instituto Federal de Santa Catarina,Department of Refrigeration and Climatization,S&amp;#x00E3;o Jos&amp;#x00E9;,Brazil"}]},{"given":"Sergej","family":"Diel","sequence":"additional","affiliation":[{"name":"CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS),Technische Hochschule Ingolstadt,Ingolstadt,Germany"}]},{"given":"Hans-Georg","family":"Schweiger","sequence":"additional","affiliation":[{"name":"CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS),Technische Hochschule Ingolstadt,Ingolstadt,Germany"}]}],"member":"263","reference":[{"key":"ref1","doi-asserted-by":"publisher","DOI":"10.1016\/j.ensm.2022.07.034"},{"key":"ref2","doi-asserted-by":"publisher","DOI":"10.3390\/batteries9040218"},{"key":"ref3","doi-asserted-by":"publisher","DOI":"10.1149\/2.0471916jes"},{"key":"ref4","doi-asserted-by":"publisher","DOI":"10.1149\/2.0731410jes"},{"article-title":"Modeling, simulation and experimental investigation of the thermal and electrochemical behavior of a LiFePO4-based lithium-ion battery","year":"2013","author":"Hellwig","key":"ref5"},{"key":"ref6","doi-asserted-by":"publisher","DOI":"10.1016\/j.egyr.2020.02.022"},{"key":"ref7","doi-asserted-by":"publisher","DOI":"10.1016\/j.est.2016.09.002"},{"key":"ref8","doi-asserted-by":"publisher","DOI":"10.1016\/j.jpowsour.2013.06.165"},{"key":"ref9","doi-asserted-by":"publisher","DOI":"10.1016\/j.jpowsour.2016.12.121"},{"key":"ref10","doi-asserted-by":"publisher","DOI":"10.1016\/j.est.2020.101269"}],"event":{"name":"2024 IEEE Vehicle Power and Propulsion Conference (VPPC)","start":{"date-parts":[[2024,10,7]]},"location":"Washington, DC, USA","end":{"date-parts":[[2024,10,10]]}},"container-title":["2024 IEEE Vehicle Power and Propulsion Conference (VPPC)"],"original-title":[],"link":[{"URL":"http:\/\/xplorestaging.ieee.org\/ielx8\/10755204\/10755185\/10755252.pdf?arnumber=10755252","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2025,1,10]],"date-time":"2025-01-10T19:42:47Z","timestamp":1736538167000},"score":1,"resource":{"primary":{"URL":"https:\/\/ieeexplore.ieee.org\/document\/10755252\/"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2024,10,7]]},"references-count":10,"URL":"https:\/\/doi.org\/10.1109\/vppc63154.2024.10755252","relation":{},"subject":[],"published":{"date-parts":[[2024,10,7]]}}}</enrichment>
    <enrichment key="local_crossrefDocumentType">proceedings-article</enrichment>
    <enrichment key="local_crossrefLicence">https://doi.org/10.15223/policy-029</enrichment>
    <enrichment key="local_import_origin">crossref</enrichment>
    <enrichment key="local_doiImportPopulated">PersonAuthorFirstName_1,PersonAuthorLastName_1,PersonAuthorFirstName_2,PersonAuthorLastName_2,PersonAuthorFirstName_3,PersonAuthorLastName_3,PersonAuthorFirstName_4,PersonAuthorLastName_4,PersonAuthorFirstName_5,PersonAuthorLastName_5,Enrichmentconference_title,Enrichmentconference_place,PublisherName,TitleMain_1,TitleParent_1,PageNumber,PageFirst,PageLast,CompletedYear,Enrichmentlocal_crossrefLicence</enrichment>
    <enrichment key="conference_title">2024 IEEE Vehicle Power and Propulsion Conference (VPPC)</enrichment>
    <enrichment key="conference_place">Washington, DC, USA</enrichment>
    <enrichment key="opus.source">doi-import</enrichment>
    <enrichment key="THI_relatedIdentifier">https://doi.org/10.1109/VPPC63154.2024.10755252</enrichment>
    <enrichment key="THI_conferenceName">2024 IEEE Vehicle Power and Propulsion Conference (VPPC), Washington (USA), 07.-10.10.2024</enrichment>
    <enrichment key="THI_openaccess">nein</enrichment>
    <enrichment key="THI_review">peer-review</enrichment>
    <enrichment key="opus.doi.autoCreate">false</enrichment>
    <enrichment key="opus.urn.autoCreate">true</enrichment>
    <author>
      <first_name>Daniel</first_name>
      <last_name>Koch</last_name>
    </author>
    <author>
      <first_name>Murillo</first_name>
      <last_name>Stein</last_name>
    </author>
    <author>
      <first_name>Samuel Luna</first_name>
      <last_name>de Abreu</last_name>
    </author>
    <author>
      <first_name>Sergej</first_name>
      <last_name>Diel</last_name>
    </author>
    <author>
      <first_name>Hans-Georg</first_name>
      <last_name>Schweiger</last_name>
    </author>
    <collection role="institutes" number="15985">Fakultät Maschinenbau</collection>
    <collection role="institutes" number="19311">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="institutes" number="19319">CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS)</collection>
    <collection role="persons" number="26111">Schweiger, Hans-Georg</collection>
    <collection role="persons" number="26446">Diel, Sergej</collection>
  </doc>
  <doc>
    <id>4645</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>53</pageNumber>
    <edition/>
    <issue>4</issue>
    <volume>10</volume>
    <articleNumber>115</articleNumber>
    <type>article</type>
    <publisherName>MDPI</publisherName>
    <publisherPlace>Basel</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>2024-03-26</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Towards to Battery Digital Passport: Reviewing Regulations and Standards for Second-Life Batteries</title>
    <abstract language="eng">Greenhouse gas emissions from transportation harm the environment. In response to these environmental concerns, numerous countries encourage the adoption of electric vehicles (EVs) as a more environmentally friendly option than traditional gasoline-powered vehicles. Advances in battery technology have made batteries an alternative solution for energy storage in stationary applications and for electric mobility. Reduced lithium-ion batteries (LIBs) production costs due to economies of scale, electrode material and cell design developments, and manufacturing process improvements have driven this success. This trend is expected to increase the number of LIBs on the market that may be discarded in the environment at the end of their useful life if more sustainable alternatives are not technologically mature. This coming environmental concern can be mitigated by collecting wasted EV batteries, reconfiguring them, and reusing them for applications with less stringent weight, performance, and size requirements. This method would extend battery life and reduce environmental effects. The present work investigates the main regulatory structures of the second-life battery industry that require rules, technical standards, and laws. To achieve this objective, a systematic review was carried out following a strict protocol that includes identifying relevant studies, extracting data and information, evaluating, and summarizing information. This paper explains the primary rules and technical standards governing the second-life battery business. The findings highlight the need for universities, research institutions, and government agencies to evaluate the second-life battery industry objectively. This would enable the creation of new technological regulations and laws for this burgeoning industry.</abstract>
    <parentTitle language="eng">Batteries</parentTitle>
    <identifier type="issn">2313-0105</identifier>
    <identifier type="urn">urn:nbn:de:bvb:573-46455</identifier>
    <enrichment key="THI_articleversion">published</enrichment>
    <enrichment key="THI_review">peer-review</enrichment>
    <enrichment key="THI_openaccess">ja</enrichment>
    <enrichment key="opus.source">publish</enrichment>
    <enrichment key="THI_relatedIdentifier">https://doi.org/10.3390/batteries10040115</enrichment>
    <licence>Creative Commons BY 4.0</licence>
    <author>
      <first_name>Carlos Antônio</first_name>
      <last_name>Rufino Júnior</last_name>
    </author>
    <author>
      <first_name>Eleonora</first_name>
      <last_name>Riva Sanseverino</last_name>
    </author>
    <author>
      <first_name>Pierluigi</first_name>
      <last_name>Gallo</last_name>
    </author>
    <author>
      <first_name>Daniel</first_name>
      <last_name>Koch</last_name>
    </author>
    <author>
      <first_name>Sergej</first_name>
      <last_name>Diel</last_name>
    </author>
    <author>
      <first_name>Gero</first_name>
      <last_name>Walter</last_name>
    </author>
    <author>
      <first_name>Lluís</first_name>
      <last_name>Trilla</last_name>
    </author>
    <author>
      <first_name>Victor José</first_name>
      <last_name>Ferreira</last_name>
    </author>
    <author>
      <first_name>Gabriela</first_name>
      <last_name>Benveniste</last_name>
    </author>
    <author>
      <first_name>Yash</first_name>
      <last_name>Kotak</last_name>
    </author>
    <author>
      <first_name>Joshua</first_name>
      <last_name>Eichman</last_name>
    </author>
    <author>
      <first_name>Hans-Georg</first_name>
      <last_name>Schweiger</last_name>
    </author>
    <author>
      <first_name>Hudson</first_name>
      <last_name>Zanin</last_name>
    </author>
    <collection role="institutes" number="15985">Fakultät Maschinenbau</collection>
    <collection role="open_access" number="">open_access</collection>
    <collection role="institutes" number="19311">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="institutes" number="19319">CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS)</collection>
    <collection role="persons" number="26111">Schweiger, Hans-Georg</collection>
    <collection role="persons" number="26446">Diel, Sergej</collection>
    <thesisPublisher>Technische Hochschule Ingolstadt</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-haw/files/4645/batteries-10-00115-v5.pdf</file>
  </doc>
  <doc>
    <id>4908</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst/>
    <pageLast/>
    <pageNumber>52</pageNumber>
    <edition/>
    <issue>14</issue>
    <volume>17</volume>
    <articleNumber>3372</articleNumber>
    <type>article</type>
    <publisherName>MDPI</publisherName>
    <publisherPlace>Basel</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>2024-07-16</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Unraveling the Degradation Mechanisms of Lithium-Ion Batteries</title>
    <abstract language="eng">Lithium-Ion Batteries (LIBs) usually present several degradation processes, which include their complex Solid-Electrolyte Interphase (SEI) formation process, which can result in mechanical, thermal, and chemical failures. The SEI layer is a protective layer that forms on the anode surface. The SEI layer allows the movement of lithium ions while blocking electrons, which is necessary to prevent short circuits in the battery and ensure safe operation. However, the SEI formation mechanisms reduce battery capacity and power as they consume electrolyte species, resulting in irreversible material loss. Furthermore, it is important to understand the degradation reactions of the LIBs used in Electric Vehicles (EVs), aiming to establish the battery lifespan, predict and minimise material losses, and establish an adequate time for replacement. Moreover, LIBs applied in EVs suffer from two main categories of degradation, which are, specifically, calendar degradation and cycling degradation. There are several studies about battery degradation available in the literature, including different degradation phenomena, but the degradation mechanisms of large-format LIBs have rarely been investigated. Therefore, this review aims to present a systematic review of the existing literature about LIB degradation, providing insight into the complex parameters that affect battery degradation mechanisms. Furthermore, this review has investigated the influence of time, C-rate, depth of discharge, working voltage window, thermal and mechanical stresses, and side reactions in the degradation of LIBs.</abstract>
    <parentTitle language="eng">Energies</parentTitle>
    <identifier type="issn">1996-1073</identifier>
    <identifier type="urn">urn:nbn:de:bvb:573-49089</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="opus_import_data">{"status":"ok","message-type":"work","message-version":"1.0.0","message":{"indexed":{"date-parts":[[2024,7,11]],"date-time":"2024-07-11T00:24:37Z","timestamp":1720657477908},"reference-count":0,"publisher":"MDPI AG","issue":"14","license":[{"start":{"date-parts":[[2024,7,9]],"date-time":"2024-07-09T00:00:00Z","timestamp":1720483200000},"content-version":"vor","delay-in-days":0,"URL":"https:\/\/creativecommons.org\/licenses\/by\/4.0\/"}],"funder":[{"DOI":"10.13039\/501100003593","name":"National Council for Scientific and Technological Development","doi-asserted-by":"publisher","award":["159332\/2019-2","301486\/2016-6"]},{"name":"S\u00e3o Paulo State Research Support Foundation","award":["2014\/02163-7","2017\/11958-1","2018\/20756-6","identification code: SI_1_23074 CUP: G79J18000680007","DIK0384\/02"]}],"content-domain":{"domain":[],"crossmark-restriction":false},"short-container-title":["Energies"],"abstract":"&lt;jats:p&gt;Lithium-Ion Batteries (LIBs) usually present several degradation processes, which include their complex Solid-Electrolyte Interphase (SEI) formation process, which can result in mechanical, thermal, and chemical failures. The SEI layer is a protective layer that forms on the anode surface. The SEI layer allows the movement of lithium ions while blocking electrons, which is necessary to prevent short circuits in the battery and ensure safe operation. However, the SEI formation mechanisms reduce battery capacity and power as they consume electrolyte species, resulting in irreversible material loss. Furthermore, it is important to understand the degradation reactions of the LIBs used in Electric Vehicles (EVs), aiming to establish the battery lifespan, predict and minimise material losses, and establish an adequate time for replacement. Moreover, LIBs applied in EVs suffer from two main categories of degradation, which are, specifically, calendar degradation and cycling degradation. There are several studies about battery degradation available in the literature, including different degradation phenomena, but the degradation mechanisms of large-format LIBs have rarely been investigated. Therefore, this review aims to present a systematic review of the existing literature about LIB degradation, providing insight into the complex parameters that affect battery degradation mechanisms. Furthermore, this review has investigated the influence of time, C-rate, depth of discharge, working voltage window, thermal and mechanical stresses, and side reactions in the degradation of LIBs.&lt;\/jats:p&gt;","DOI":"10.3390\/en17143372","type":"journal-article","created":{"date-parts":[[2024,7,10]],"date-time":"2024-07-10T13:23:08Z","timestamp":1720617788000},"page":"3372","source":"Crossref","is-referenced-by-count":0,"title":["Unraveling the Degradation Mechanisms of Lithium-Ion Batteries"],"prefix":"10.3390","volume":"17","author":[{"ORCID":"http:\/\/orcid.org\/0000-0003-4263-2949","authenticated-orcid":false,"given":"Carlos Ant\u00f4nio","family":"Rufino J\u00fanior","sequence":"first","affiliation":[{"name":"School of Electrical and Computer Engineering, University of Campinas (UNICAMP), Campinas 13083-852, Brazil"},{"name":"Interinstitutional Graduate Program in Bioenergy (USP\/UNICAMP\/UNESP), 330 Cora Coralina Street, Cidade Universit\u00e1ria, Campinas 13083-896, Brazil"},{"name":"CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS), Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-0113-7650","authenticated-orcid":false,"given":"Eleonora Riva","family":"Sanseverino","sequence":"additional","affiliation":[{"name":"Engineering Department, University of Palermo (UNIPA), 90128 Palermo, Italy"}]},{"ORCID":"http:\/\/orcid.org\/0000-0002-6333-5997","authenticated-orcid":false,"given":"Pierluigi","family":"Gallo","sequence":"additional","affiliation":[{"name":"Engineering Department, University of Palermo (UNIPA), 90128 Palermo, Italy"},{"name":"Consorzio Nazionale Interuniversitario per le Telecomunicazioni (CNIT), 43124 Parma, Italy"}]},{"given":"Murilo Machado","family":"Amaral","sequence":"additional","affiliation":[{"name":"School of Electrical and Computer Engineering, University of Campinas (UNICAMP), Campinas 13083-852, Brazil"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-2581-2825","authenticated-orcid":false,"given":"Daniel","family":"Koch","sequence":"additional","affiliation":[{"name":"CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS), Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-2730-4904","authenticated-orcid":false,"given":"Yash","family":"Kotak","sequence":"additional","affiliation":[{"name":"CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS), Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-3443-0765","authenticated-orcid":false,"given":"Sergej","family":"Diel","sequence":"additional","affiliation":[{"name":"CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS), Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany"}]},{"given":"Gero","family":"Walter","sequence":"additional","affiliation":[{"name":"CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS), Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany"}]},{"ORCID":"http:\/\/orcid.org\/0000-0003-0184-1322","authenticated-orcid":false,"given":"Hans-Georg","family":"Schweiger","sequence":"additional","affiliation":[{"name":"CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS), Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany"}]},{"given":"Hudson","family":"Zanin","sequence":"additional","affiliation":[{"name":"Interinstitutional Graduate Program in Bioenergy (USP\/UNICAMP\/UNESP), 330 Cora Coralina Street, Cidade Universit\u00e1ria, Campinas 13083-896, Brazil"}]}],"member":"1968","published-online":{"date-parts":[[2024,7,9]]},"container-title":["Energies"],"original-title":[],"language":"en","link":[{"URL":"https:\/\/www.mdpi.com\/1996-1073\/17\/14\/3372\/pdf","content-type":"unspecified","content-version":"vor","intended-application":"similarity-checking"}],"deposited":{"date-parts":[[2024,7,10]],"date-time":"2024-07-10T13:46:19Z","timestamp":1720619179000},"score":1,"resource":{"primary":{"URL":"https:\/\/www.mdpi.com\/1996-1073\/17\/14\/3372"}},"subtitle":[],"short-title":[],"issued":{"date-parts":[[2024,7,9]]},"references-count":0,"journal-issue":{"issue":"14","published-online":{"date-parts":[[2024,7]]}},"alternative-id":["en17143372"],"URL":"http:\/\/dx.doi.org\/10.3390\/en17143372","relation":{},"ISSN":["1996-1073"],"issn-type":[{"value":"1996-1073","type":"electronic"}],"subject":[],"published":{"date-parts":[[2024,7,9]]}}}</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="local_crossrefLicence">https://creativecommons.org/licenses/by/4.0/</enrichment>
    <enrichment key="local_import_origin">crossref</enrichment>
    <enrichment key="local_doiImportPopulated">PersonAuthorFirstName_1,PersonAuthorLastName_1,PersonAuthorIdentifierOrcid_1,PersonAuthorFirstName_2,PersonAuthorLastName_2,PersonAuthorIdentifierOrcid_2,PersonAuthorFirstName_3,PersonAuthorLastName_3,PersonAuthorIdentifierOrcid_3,PersonAuthorFirstName_4,PersonAuthorLastName_4,PersonAuthorFirstName_5,PersonAuthorLastName_5,PersonAuthorIdentifierOrcid_5,PersonAuthorFirstName_6,PersonAuthorLastName_6,PersonAuthorIdentifierOrcid_6,PersonAuthorFirstName_7,PersonAuthorLastName_7,PersonAuthorIdentifierOrcid_7,PersonAuthorFirstName_8,PersonAuthorLastName_8,PersonAuthorFirstName_9,PersonAuthorLastName_9,PersonAuthorIdentifierOrcid_9,PersonAuthorFirstName_10,PersonAuthorLastName_10,PublisherName,TitleMain_1,Language,TitleAbstract_1,TitleParent_1,ArticleNumber,Issue,Volume,CompletedYear,IdentifierIssn,Enrichmentlocal_crossrefLicence</enrichment>
    <enrichment key="opus.source">doi-import</enrichment>
    <enrichment key="THI_relatedIdentifier">https://doi.org/10.3390/en17143372</enrichment>
    <enrichment key="THI_articleversion">published</enrichment>
    <enrichment key="THI_review">peer-review</enrichment>
    <enrichment key="THI_openaccess">ja</enrichment>
    <author>
      <first_name>Carlos Antônio</first_name>
      <last_name>Rufino Júnior</last_name>
    </author>
    <author>
      <first_name>Eleonora</first_name>
      <last_name>Riva Sanseverino</last_name>
    </author>
    <author>
      <first_name>Pierluigi</first_name>
      <last_name>Gallo</last_name>
    </author>
    <author>
      <first_name>Murilo Machado</first_name>
      <last_name>Amaral</last_name>
    </author>
    <author>
      <first_name>Daniel</first_name>
      <last_name>Koch</last_name>
    </author>
    <author>
      <first_name>Yash</first_name>
      <last_name>Kotak</last_name>
    </author>
    <author>
      <first_name>Sergej</first_name>
      <last_name>Diel</last_name>
    </author>
    <author>
      <first_name>Gero</first_name>
      <last_name>Walter</last_name>
    </author>
    <author>
      <first_name>Hans-Georg</first_name>
      <last_name>Schweiger</last_name>
    </author>
    <author>
      <first_name>Hudson</first_name>
      <last_name>Zanin</last_name>
    </author>
    <collection role="institutes" number="15985">Fakultät Maschinenbau</collection>
    <collection role="open_access" number="">open_access</collection>
    <collection role="institutes" number="19311">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="institutes" number="19319">CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS)</collection>
    <collection role="persons" number="26111">Schweiger, Hans-Georg</collection>
    <collection role="persons" number="26446">Diel, Sergej</collection>
    <thesisPublisher>Technische Hochschule Ingolstadt</thesisPublisher>
    <file>https://opus4.kobv.de/opus4-haw/files/4908/energies-17-03372-v2.pdf</file>
  </doc>
  <doc>
    <id>5576</id>
    <completedYear/>
    <publishedYear>2024</publishedYear>
    <thesisYearAccepted/>
    <language>eng</language>
    <pageFirst>82</pageFirst>
    <pageLast>92</pageLast>
    <pageNumber/>
    <edition/>
    <issue>1</issue>
    <volume>15</volume>
    <articleNumber/>
    <type>article</type>
    <publisherName>ABENS</publisherName>
    <publisherPlace>São Paulo</publisherPlace>
    <creatingCorporation/>
    <contributingCorporation/>
    <belongsToBibliography>1</belongsToBibliography>
    <completedDate>--</completedDate>
    <publishedDate>--</publishedDate>
    <thesisDateAccepted>--</thesisDateAccepted>
    <title language="eng">Operating Behavior of a Photovoltaic-driven Electrolysis System</title>
    <parentTitle language="eng">Revista Brasileira de Energia Solar</parentTitle>
    <identifier type="issn">2526-2831</identifier>
    <enrichment key="opus_doi_flag">true</enrichment>
    <enrichment key="local_crossrefDocumentType">journal-article</enrichment>
    <enrichment key="local_import_origin">crossref</enrichment>
    <enrichment key="local_doiImportPopulated">PersonAuthorFirstName_1,PersonAuthorLastName_1,PersonAuthorFirstName_2,PersonAuthorLastName_2,PersonAuthorFirstName_3,PersonAuthorLastName_3,PersonAuthorFirstName_4,PersonAuthorLastName_4,PersonAuthorFirstName_5,PersonAuthorLastName_5,PersonAuthorFirstName_6,PersonAuthorLastName_6,PersonAuthorFirstName_7,PersonAuthorLastName_7,PersonAuthorFirstName_8,PersonAuthorLastName_8,PersonAuthorFirstName_9,PersonAuthorLastName_9,PublisherName,TitleMain_1,TitleAbstract_1,TitleParent_1,PageNumber,PageFirst,PageLast,Issue,Volume,CompletedYear,IdentifierIssn</enrichment>
    <enrichment key="opus.source">doi-import</enrichment>
    <enrichment key="THI_openaccess">nein</enrichment>
    <enrichment key="THI_review">peer-review</enrichment>
    <enrichment key="THI_articleversion">published</enrichment>
    <enrichment key="THI_relatedIdentifier">https://doi.org/10.59627/rbens.2024v15i1.456</enrichment>
    <author>
      <first_name>Gero</first_name>
      <last_name>Walter</last_name>
    </author>
    <author>
      <first_name>Sergej</first_name>
      <last_name>Diel</last_name>
    </author>
    <author>
      <first_name>Carlos Antônio</first_name>
      <last_name>Rufino Júnior</last_name>
    </author>
    <author>
      <first_name>Hans-Georg</first_name>
      <last_name>Schweiger</last_name>
    </author>
    <author>
      <first_name>Iury</first_name>
      <last_name>Valente de Bessa</last_name>
    </author>
    <author>
      <first_name>Maíra</first_name>
      <last_name>Mallmann</last_name>
    </author>
    <author>
      <first_name>Aline</first_name>
      <last_name>Kirsten Vidal de Oliveira</last_name>
    </author>
    <author>
      <first_name>Daniel</first_name>
      <last_name>Odilio Dos Santos</last_name>
    </author>
    <author>
      <first_name>Ricardo</first_name>
      <last_name>Rüther</last_name>
    </author>
    <collection role="institutes" number="15985">Fakultät Maschinenbau</collection>
    <collection role="institutes" number="19311">Fakultät Elektro- und Informationstechnik</collection>
    <collection role="institutes" number="19319">CARISSMA Institute of Electric, Connected and Secure Mobility (C-ECOS)</collection>
    <collection role="persons" number="26111">Schweiger, Hans-Georg</collection>
    <collection role="persons" number="26446">Diel, Sergej</collection>
  </doc>
</export-example>
