@article{KleinerKomsiyskaElgeretal.2019, author = {Kleiner, Jan and Komsiyska, Lidiya and Elger, Gordon and Endisch, Christian}, title = {Thermal modelling of a prismatic lithium-ion cell in a battery electric vehicle environment}, volume = {13}, pages = {62}, journal = {Energies}, subtitle = {influences of the experimental validation setup}, number = {1}, publisher = {MDPI}, address = {Basel}, issn = {1996-1073}, doi = {https://doi.org/10.3390/en13010062}, year = {2019}, abstract = {In electric vehicles with lithium-ion battery systems, the temperature of the battery cells has a great impact on performance, safety, and lifetime. Therefore, developing thermal models of lithium-ion batteries to predict and investigate the temperature development and its impact is crucial. Commonly, models are validated with experimental data to ensure correct model behaviour. However, influences of experimental setups or comprehensive validation concepts are often not considered, especially for the use case of prismatic cells in a battery electric vehicle. In this work, a 3D electro-thermal model is developed and experimentally validated to predict the cell's temperature behaviour for a single prismatic cell under battery electric vehicle (BEV) boundary conditions. One focus is on the development of a single cell's experimental setup and the investigation of the commonly neglected influences of an experimental setup on the cell's thermal behaviour. Furthermore, a detailed validation is performed for the laboratory BEV scenario for spatially resolved temperatures and heat generation. For validation, static and dynamic loads are considered as well as the detected experimental influences. The validated model is used to predict the temperature within the cell in the BEV application for constant current and Worldwide harmonized Light vehicles Test Procedure (WLTP) load profile.}, language = {en} } @article{KotakKotakBradeetal.2021, author = {Kotak, Bhavya and Kotak, Yash and Brade, Katja and Kubjatko, Tibor and Schweiger, Hans-Georg}, title = {Battery Crush Test Procedures in Standards and Regulation: Need for Augmentation and Harmonisation}, volume = {7}, pages = {63}, journal = {Batteries}, number = {3}, publisher = {MDPI}, address = {Basel}, issn = {2313-0105}, doi = {https://doi.org/10.3390/batteries7030063}, year = {2021}, abstract = {Battery safety is a prominent concern for the deployment of electric vehicles (EVs). The battery powering an EV contains highly energetic active materials and flammable organic electrolytes. Usually, an EV battery catches fire due to its thermal runaway, either immediately at the time of the accident or can take a while to gain enough heat to ignite the battery chemicals. There are numerous battery abuse testing standards and regulations available globally. Therefore, battery manufacturers are always in dilemma to choose the safest one. Henceforth, to find the optimal outcome of these two major issues, six standards (SAE J2464:2009, GB/T 31485-2015:2015, FreedomCAR:2006, ISO 12405-3:2014, IEC 62660-2:2010, and SAND2017-6295:2017) and two regulations (UN/ECE-R100.02:2013 and GTR 20:2018), that are followed by more than fifty countries in the world, are investigated in terms of their abuse battery testing conditions (crush test). This research proves that there is a need for (a) augmenting these standards and regulations as they do not consider real-life vehicle crash scenarios, and (b) one harmonised framework should be developed, which can be adopted worldwide. These outcomes will solve the battery manufacturers dilemma and will also increase the safety of EV consumers.}, language = {en} } @article{KugeleObergfellSax2021, author = {Kugele, Stefan and Obergfell, Philipp and Sax, Eric}, title = {Model-based resource analysis and synthesis of service-oriented automotive software architectures}, volume = {20}, journal = {Software and Systems Modeling}, number = {6}, publisher = {Springer}, address = {Berlin}, issn = {1619-1374}, doi = {https://doi.org/10.1007/s10270-021-00896-9}, pages = {1945 -- 1975}, year = {2021}, abstract = {Context Automotive software architectures describe distributed functionality by an interaction of software components. One drawback of today's architectures is their strong integration into the onboard communication network based on predefined dependencies at design time. The idea is to reduce this rigid integration and technological dependencies. To this end, service-oriented architecture offers a suitable methodology since network communication is dynamically established at run-time. Aim We target to provide a methodology for analysing hardware resources and synthesising automotive service-oriented architectures based on platform-independent service models. Subsequently, we focus on transforming these models into a platform-specific architecture realisation process following AUTOSAR Adaptive. Approach For the platform-independent part, we apply the concepts of design space exploration and simulation to analyse and synthesise deployment configurations, i. e., mapping services to hardware resources at an early development stage. We refine these configurations to AUTOSAR Adaptive software architecture models representing the necessary input for a subsequent implementation process for the platform-specific part. Result We present deployment configurations that are optimal for the usage of a given set of computing resources currently under consideration for our next generation of E/E architecture. We also provide simulation results that demonstrate the ability of these configurations to meet the run time requirements. Both results helped us to decide whether a particular configuration can be implemented. As a possible software toolchain for this purpose, we finally provide a prototype. Conclusion The use of models and their analysis are proper means to get there, but the quality and speed of development must also be considered.}, language = {en} } @article{ObermaierRieblAlBayattietal.2021, author = {Obermaier, Christina and Riebl, Raphael and Al-Bayatti, Ali H. and Khan, Sarmadullah and Facchi, Christian}, title = {Measuring the Realtime Capability of Parallel-Discrete-Event-Simulations}, volume = {10}, pages = {636}, journal = {Electronics}, number = {6}, publisher = {MDPI}, address = {Basel}, issn = {2079-9292}, doi = {https://doi.org/10.3390/electronics10060636}, year = {2021}, abstract = {Speeding up Discrete Event Simulations (DESs) is a broad research field. Promising Parallel Discrete Event Simulation (PDES) approaches with optimistic and conservative synchronisation schemes have emerged throughout the years. However, in the area of real-time simulation, PDESs are rarely considered. This is caused by the complex problem of fitting parallel executed DES models to a real-time clock. Hence, this paper gives an extensive review of existing conservative and optimistic synchronisation schemes for PDESs. It introduces a metric to compare their real-time capabilities to determine whether they can be used for soft or firm real-time simulation. Examples are given on how to apply this metric to evaluate PDESs using synthetic and real-world examples. The results of the investigation reveal that no final answer can be given if PDESs can be used for soft or firm real-time simulation as they are. However, boundary conditions were defined, which allow a use-case specific evaluation of the real-time capabilities of a certain parallel executed DES. Using this in-depth knowledge and can lead to predictability of the real-time behaviour of a simulation run.}, language = {en} } @article{MehtaEhrenwirthMissalletal.2021, author = {Mehta, Kedar and Ehrenwirth, Mathias and Missall, Siegmund and Degembaeva, Nadira and Akmatov, Kuban and Z{\"o}rner, Wilfried}, title = {Energy Profiling of a High-Altitude Kyrgyz Community: Challenges and Motivations to Preserve Floodplain Ecosystems Based on Household Survey}, volume = {13}, pages = {13086}, journal = {Sustainability}, number = {23}, publisher = {MDPI}, address = {Basel}, issn = {2071-1050}, doi = {https://doi.org/10.3390/su132313086}, year = {2021}, abstract = {The floodplain areas along the Naryn River in Kyrgyzstan are essential as they hold the riparian (local) ecosystems because they provide firewood, pastureland, and areas for recreation and protection against erosion. Due to limited access to adequate, reliable, and sustainable energy services, the rural population usually derived their energy needs from multiple natural energy resources (i.e., firewood, charcoal, agricultural residues, animal dung, and wood branches). This is considered a common and predominant practice in rural Kyrgyzstan. This situation leads to a negative impact on local ecosystem services. In addition to that, the reliance on solid fuels contributes to indoor and outdoor air pollution, which is partially threatening the local ecosystem services. By contrast, the employment of renewable-based energy supply systems would substantially reduce the burden on the environment, which is mainly untapped. To integrate renewable energies, it is important to understand the energy behavior of floodplain communities. In that response, the presented article is the first attempt to capture the energy identity of the floodplain community of Kyrgyzstan based on a quantitative energy-based (on-site) household survey. Furthermore, the present research article synthesizes the driving factors that have a (direct or indirect) impact on the energy and local ecosystem services. In addition, the present article proposes a brief pathway for the sustainable energy transition. The article records the recommendation to integrate renewable energies to preserve the local ecosystems of Kyrgyzstan.}, language = {en} } @article{MehtaEhrenwirthTrinkletal.2021, author = {Mehta, Kedar and Ehrenwirth, Mathias and Trinkl, Christoph and Z{\"o}rner, Wilfried and Greenough, Richard}, title = {The energy situation in Central Asia}, volume = {14}, pages = {2805}, journal = {Energies}, subtitle = {a comprehensive energy review focusing on rural areas}, number = {10}, publisher = {MDPI}, address = {Basel}, issn = {1996-1073}, doi = {https://doi.org/10.3390/en14102805}, year = {2021}, abstract = {The northern part of the globe is dominated by industrialisation and is well-developed. For many years, the southern part of the world (South Asia, Africa etc.) has been a target of research concentrating on access to energy (mainly electricity) in rural regions. However, the Central Asian region has not been a focus of energy research compared to South East Asia and Africa. Despite plentiful domestically available energy resources, the energy supply in Central Asia is very unevenly distributed between urban and rural areas. Almost half of the total population of Central Asia lives in rural areas and there is a lack of access to modern energy services to meet primary needs. To analyse the energy situation (i.e., electricity, heating, hot water consumption, cooking, etc.) in rural Central Asia, this paper reviews residential energy consumption trends in rural Central Asian regions as compared to urban areas. Furthermore, the paper illustrates the potential of renewable energies in Central Asia. To perform the study, a qualitative comparative analysis was conducted based on a literature review, data, and statistical information. In summary, the presented article discusses the rural energy situation analytically and provides in-depth insights of Central Asian energy infrastructure.}, language = {en} } @article{SanchezMoralesDauthHuberetal.2021, author = {S{\´a}nchez Morales, Eduardo and Dauth, Julian and Huber, Bertold and Garc{\´i}a Higuera, Andr{\´e}s and Botsch, Michael}, title = {High precision outdoor and indoor reference state estimation for testing autonomous vehicles}, volume = {21}, pages = {1131}, journal = {Sensors}, number = {4}, publisher = {MDPI}, address = {Basel}, issn = {1424-8220}, doi = {https://doi.org/10.3390/s21041131}, year = {2021}, abstract = {A current trend in automotive research is autonomous driving. For the proper testing and validation of automated driving functions a reference vehicle state is required. Global Navigation Satellite Systems (GNSS) are useful in the automation of the vehicles because of their practicality and accuracy. However, there are situations where the satellite signal is absent or unusable. This research work presents a methodology that addresses those situations, thus largely reducing the dependency of Inertial Navigation Systems (INSs) on the SatNav. The proposed methodology includes (1) a standstill recognition based on machine learning, (2) a detailed mathematical description of the horizontation of inertial measurements, (3) sensor fusion by means of statistical filtering, (4) an outlier detection for correction data, (5) a drift detector, and (6) a novel LiDAR-based Positioning Method (LbPM) for indoor navigation. The robustness and accuracy of the methodology are validated with a state-of-the-art INS with Real-Time Kinematic (RTK) correction data. The results obtained show a great improvement in the accuracy of vehicle state estimation under adverse driving conditions, such as when the correction data is corrupted, when there are extended periods with no correction data and in the case of drifting. The proposed LbPM method achieves an accuracy closely resembling that of a system with RTK.}, language = {en} } @article{VannahmeEhrenwirthSchrag2021, author = {Vannahme, Anna and Ehrenwirth, Mathias and Schrag, Tobias}, title = {Enhancement of a district heating substation as part of a low-investment optimization strategy for district heating systems}, volume = {10}, pages = {53}, journal = {Resources}, number = {5}, publisher = {MDPI}, address = {Basel}, issn = {2079-9276}, doi = {https://doi.org/10.3390/resources10050053}, year = {2021}, abstract = {In an ongoing project, low-investment measures for the optimization of district heating systems are analyzed. The optimization strategies are collected in a catalog, which is the core of a guideline. The application of this guideline is demonstrated using two concrete district heating networks as examples. In this study, the improvement of an analog controlled district heating substation by an electronic controller is investigated. High supply temperatures and heat losses are often a challenge in district heating networks. The district heating substations have a major influence on the network return temperatures. The comparison of the two substation setups with analog and electronic controllers is carried out by laboratory measurement. It can be shown that the return temperatures can be reduced by an average of 20 K in winter and transition, as well as 16 K in summer. The district heating network losses are calculated for one of both specific district heating networks. They are calculated from the ratio of network losses to generated energy. The generated energy is the sum of network losses and consumer demand. The thermal losses of the network can be reduced by 3\%. The volume flow in the heating network can be reduced to a quarter. Therefore, the pumping energy requirement drops sharply since these changes cubically affect the volume flow}, language = {en} } @article{KomsiyskaBuchbergerDiehletal.2021, author = {Komsiyska, Lidiya and Buchberger, Tobias and Diehl, Simon and Ehrensberger, Moritz and Hanzl, Christian and Hartmann, Christoph and H{\"o}lzle, Markus and Kleiner, Jan and Lewerenz, Meinert and Liebhart, Bernhard and Schmid, Michael and Schneider, Dominik and Speer, Sascha and St{\"o}ttner, Julia and Terbrack, Christoph and Hinterberger, Michael and Endisch, Christian}, title = {Critical review of intelligent battery systems}, volume = {14}, pages = {5989}, journal = {Energies}, subtitle = {challenges, implementation, and potential for electric vehicles}, number = {18}, publisher = {MDPI}, address = {Basel}, issn = {1996-1073}, doi = {https://doi.org/10.3390/en14185989}, year = {2021}, abstract = {This review provides an overview of new strategies to address the current challenges of automotive battery systems: Intelligent Battery Systems. They have the potential to make battery systems more performant and future-proof for coming generations of electric vehicles. The essential features of Intelligent Battery Systems are the accurate and robust determination of cell individual states and the ability to control the current of each cell by reconfiguration. They enable high-level functions like fault diagnostics, multi-objective balancing strategies, multilevel inverters, and hybrid energy storage systems. State of the art and recent advances in these topics are compiled and critically discussed in this article. A comprising, critical discussion of the implementation aspects of Intelligent Battery Systems complements the review. We touch on sensing, battery topologies and management, switching elements, communication architecture, and impact on the single-cell. This review contributes to transferring the best technologies from research to product development.}, language = {en} } @article{AhlbergTidbladEdstroemHernandezetal.2021, author = {Ahlberg Tidblad, Annika and Edstr{\"o}m, Kristina and Hern{\´a}ndez, Guiomar and de Meatza, Iratxe and Landa-Medrano, Imanol and Jacas Biendicho, Jordi and Trilla, Llu{\´i}s and Buysse, Maarten and Ierides, Marcos and Perez Horno, Beatriz and Kotak, Yash and Schweiger, Hans-Georg and Koch, Daniel and Kotak, Bhavya}, title = {Future Material Developments for Electric Vehicle Battery Cells Answering Growing Demands from an End-User Perspective}, volume = {14}, pages = {4223}, journal = {Energies}, number = {14}, publisher = {MDPI}, address = {Basel}, issn = {1996-1073}, doi = {https://doi.org/10.3390/en14144223}, year = {2021}, abstract = {Nowadays, batteries for electric vehicles are expected to have a high energy density, allow fast charging and maintain long cycle life, while providing affordable traction, and complying with stringent safety and environmental standards. Extensive research on novel materials at cell level is hence needed for the continuous improvement of the batteries coupled towards achieving these requirements. This article firstly delves into future developments in electric vehicles from a technology perspective, and the perspective of changing end-user demands. After these end-user needs are defined, their translation into future battery requirements is described. A detailed review of expected material developments follows, to address these dynamic and changing needs. Developments on anodes, cathodes, electrolyte and cell level will be discussed. Finally, a special section will discuss the safety aspects with these increasing end-user demands and how to overcome these issues.}, language = {en} }