@article{GottwaltKubaschinskiWaltzetal.2023, author = {Gottwalt, Albin and Kubaschinski, Paul and Waltz, Manuela and V{\"o}lkl, Rainer and Glatzel, Uwe and Tetzlaff, Ulrich}, title = {Cyclic deformation behavior of non-oriented electrical steel sheets}, volume = {2023}, pages = {145684}, journal = {Materials Science and Engineering: A}, number = {886}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0921-5093}, doi = {https://doi.org/10.1016/j.msea.2023.145684}, year = {2023}, language = {en} } @article{GottwaltKubaschinskiWaltzetal.2022, author = {Gottwalt, Albin and Kubaschinski, Paul and Waltz, Manuela and Glatzel, Uwe and Tetzlaff, Ulrich}, title = {An experimental setup for fatigue testing of thin electrical steel sheets}, volume = {2022}, pages = {106987}, journal = {International Journal of Fatigue}, number = {162}, publisher = {Elsevier}, address = {Oxford}, issn = {0142-1123}, doi = {https://doi.org/10.1016/j.ijfatigue.2022.106987}, year = {2022}, abstract = {In this study, the fatigue behavior of thin electrical steel sheets under cyclic loading is investigated. Results from strain-controlled and stress-controlled fatigue tests with different specimen geometries and different test setups are presented and compared with conventional testing methods. The results imply that conventional testing methods should be adjusted for testing thin electrical steel sheets because the fatigue life depends significantly on the test setup as well as the specimen geometry. Therefore, this study proposes an improved specimen geometry and test setup for stress- and strain-controlled fatigue tests of thin electrical steel sheets depending on the desired testing parameters.}, language = {en} } @article{VolpatoPereiraLemosetal.2023, author = {Volpato, Guilherme and Pereira, A. S. P. and Lemos, Georges and Schmitt, Matthias and Glatzel, Uwe and Pyczak, Florian and Tetzlaff, Ulrich and Fredel, M{\´a}rcio Celso}, title = {Out-of-Equilibrium Formation of Ni3Ti η-Phase in Inconel X-750 Produced via Laser Powder Bed Fusion and Spark Plasma Sintering}, volume = {54}, journal = {Metallurgical and Materials Transactions A: Physical metallurgy and materials science}, number = {5}, publisher = {Springer}, address = {Boston}, issn = {1073-5623}, doi = {https://doi.org/10.1007/s11661-022-06946-1}, pages = {1924 -- 1936}, year = {2023}, language = {en} }