TY - RPRT A1 - Kleimaier, Alexander T1 - Modellierung der PMSM im uvw-System N2 - Zur Auslegung von elektrischen Antrieben, zur Reglerentwicklung und zum Test von Verfahren zur Pulsmustererzeugung benötigt man Simulationsmodelle elektrischer Maschinen. Im vorliegenden Bericht werden die zur Modellbildung eines frei parametrierbaren PMSM-Maschinenmodells ausgeführten Rechnungen und Vorarbeiten sowie die Umsetzung in ein Matlab/Simulinkmodell beschrieben. Besonderheit ist, dass die Modellierung nicht als Grundwellenmodell im dq-System erfolgt, sondern ohne Raumzeigertransformation direkt im uvw-System. Dadurch entfallen entsprechende Einschränkungen, und die Verläufe der EMK sowie der Eigen- und Koppelinduktivitäten sind frei definierbar. Andererseits wird dadurch die Modellbildung erheblich komplexer, und es sind umfangreiche Vorüberlegungen zur Bestimmung des Synchron- und Reaktionsmomentes erforderlich. Das abschließend vorgestellte Simulinkmodell erlaubt die Simulation eines kompletten Antriebes inklusive Vektorregelung, Pulsmustererzeugung, Wechselrichter sowie Maschine und Sensorik. KW - PMSM KW - uvw-System KW - Dauermagneterregte Synchronmaschine KW - Modellierung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-2669 ER - TY - THES A1 - Leiner, David Fabian T1 - Developing a framework for the implementation and utilization of agile methods in the project management of small and medium sized enterprises N2 - Due to their qualities to better deal with the unprecedented characteristics of today's VUCA world than conservative project management methods, agile methods have seen an immense upheavel in the industry in recent years – agile methods and the topic of agility in general seem to be inevitable in this context. However, a systematic literature search carried out for the purpose of finding a topic for this master's thesis only confirms this picture to a limited extent: While there is a vast amount of literature on agile methods in project management in general, there is a downright research gap in the more specific field of agile methods in the project management of small and medium sized enterprises (short: SMEs). This insight was taken as an opportunity to bring some light into the dark-ness and to try to fill the existing research gap by attempting to develop a framework for the implementation and utilization of agile methods in the project management of SMEs. In order to create a knowledge base, the theoretical foundation was formed at the very beginning, with a view to both agile project management and SMEs. Subsequently, five specific research questions were defined and a suitable research design was created. In a first round of interviews, twelve problem-centred interviews were conducted with inter-view participants who had experience in the context of agile methods in the project man-agement of SMEs and could report on it. The initial framework based on the resulting findings was then evaluated by five experts in a second round of interviews. After the evaluation of the expert consultation, the initial framework was then modified on the basis of the experts' responses and the final framework was developed. The final framework provides information on what is happening when an agile method is being implemented and later used in the project management of a SME. Therewith, it helps SMEs who are about to introduce an agile method themselves in that they can derive important infor-mation, reference points and recommendations for action from it. For academia, the framework gives rise to further research topics that should be addressed. KW - Project Management, SME, Agile Methods, Framework KW - Projektmanagement KW - Klein- und Mittelbetrieb KW - Agilität KW - Framework Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-3454 ER - TY - THES A1 - Veitl, Jakob T1 - Development of a laminable, cellulose-based Separator for Lithium-Ion Batteries N2 - Cellulose is a promising material for lithium-ion battery separator as it is sustainable, affordable, has excellent electrolyte wettability and is well applicable in lamination-based cell production. Lamination can accelerate the time-consuming stacking step in pouch cell assembly, reduce scrap rate and enhance battery performance, but relies on thermoplastic material on electrode/separator interfaces. In this work, different surface modification layers were applied to a cellulose separator via electrospinning technique and compared with regard to their applicability for lamination-based cell production. Processes have been developed to apply A) homogeneous fibers consisting of 4 different binder polymer types and b) layers of a fluorothermoplastic polymer (THV) with different morphologies. All layers were applied at the same low areal loading of 0.4 𝑔/𝑚2. All investigated polymer layers allowed to create mechanically stable interfaces without damaging the separator. The polymers were found to establish maximum adhesion at lamination temperatures that typically are about 10 K above their respective melting temperature. Highest adhesive forces above 15 𝑁/𝑚 were observed at lamination enabled by a low-melting fluoroelastomer (3M FPO 3850) at 120 °C. Evidence was found that many adhesion points well distributed over the surface cause higher adhesion than few large adhesion points, when applied at the same areal loading, but no clear statement can be made as to whether microfibers or microparticles lead to better adhesion. Regarding electrochemical performance, the cellulose separator was shown to be well suited for lithium-ion batteries. All 4 polymers used were found to be electrochemically stable in the applied voltage window and suitable for the use in NMC622 / graphite battery cells. Laminated cells with the developed interlayers showed improved (THV, FPO, PVDFS) or equal (PVDF-K) fast charging and discharging capability. Cells with THV coating performed best in C-rate tests, where their discharge capacity at 3 C rate was improved by 34.1% compared to non-laminated reference cells. Cells with the cellulose separator showed high capacity retention of 89.1% after 500 fast-charging cycles. The morphology of applied layers was not found to have a major influence on electrochemical performance, as long as the binder loading is kept at a moderate level and the deposited layer is porous and well distributed over the separator’s surface. N2 - Zellulose ist ein vielversprechendes Material als Separator von Lithium-Ionen-Batterien. Es ist nachhaltig, kostengünstig, ausgezeichnet mit Elektrolyt benetzbar und gut geeignet für den Einsatz von Lamination bei der Zellfertigung. Durch Lamination der Zellkomponenten kann der Stapelprozess bei der Pouchzellfertigung beschleunigt, die Ausschussrate reduziert und die Batterieleistung verbessert werden. Jedoch ist man dabei auf thermoplastisches Material an den Grenzflächen zwischen Elektroden und Separator angewiesen. In dieser Arbeit wurden mittels Elektrospinning verschiedene Oberflächenbeschichtungen auf einen Zellulose-Separator aufgebracht und hinsichtlich ihrer Anwendbarkeit für die laminationsbasierte Zellfertigung verglichen. Es wurden Prozesse entwickelt, um A) homogene Fasern aus 4 verschiedenen Binderpolymeren und B) Schichten unterschiedlicher Morphologie aus einem fluorthermoplastischen Polymer (THV) auf den Separator aufzubringen. Alle Schichten wurden mit der niedrigen Flächenbelastung von 0,4 𝑔/𝑚2 aufgebracht. Mit allen untersuchten Polymerschichten konnten mechanisch stabile Grenzflächen erzeugt werden, ohne dabei den Separator zu beschädigen. Es wurde festgestellt, dass die Polymere die optimale Haftung bei Laminationstemperaturen erzeugen, die typischerweise etwa 10 K über der jeweiligen Schmelztemperatur liegen. Die höchsten Haftkräfte von über 15 𝑁/𝑚 wurden bei der Lamination mit einem niedrig schmelzenden Fluorelastomer (3M FPO 3850) bei 120 °C beobachtet. Es wurde nachgewiesen, dass bei Auftrag mit gleicher Flächenbeladung viele gut über die Oberfläche verteilte Haftpunkte bessere Stabilität bewirken alswenige große Haftpunkte. Keine eindeutige Aussage konnte darüber getroffen werden, ob Mikrofasern oder Mikropartikel zu besserer Haftung führen. Hinsichtlich der elektrochemischen Leistungsfähigkeit erwies sich der Zellulose-Separator als sehr gut geeignet für den Einsatz in Lithium-Ionen-Batterien. Alle 4 verwendeten Polymere sind im angelegten Spannungsfenster elektrochemisch stabil und für den Einsatz in NMC622 /Graphit-Batteriezellen geeignet. Laminierte Zellen mit den entwickelten Zwischenschichten zeigten verbesserte (THV, FPO, PVDF-S) oder gleichwertige (PVDF-K) Schnelllade- und Entladefähigkeit. Die Entladekapazität von Zellen mit THV-Beschichtung lag bei 3 C um 34,1% über nicht-laminierten Referenzzellen. Zellen mit dem Zellulose- Separator zeigten nach 500 Schnellladezyklen eine hohe Restkapazität von 89,1%. Die Morphologie der aufgebrachten Schicht scheint die elektrochemische Leistung nicht wesentlich zu beeinflussen, sofern die Flächenbeladung der Zwischenschicht moderat ist und die aufgebrachte Schicht porös und gut über die Separatorfläche verteilt ist. KW - Lithium-Ionen-Akkumulator KW - Batterieseparator KW - Cellulose Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-3478 ER - TY - JOUR A1 - Schmitt, Markus A1 - Wallner, Klaus T1 - Earth Operations Management – How managers found their right business N2 - This paper assumes it is the year 2051, and we look back to how a new science, Earth Operations Management (EOM), has started and developed since the beginning of the 2020s. EOM was triggered by the idea to regard planet Earth as a business (PEaaB). Millions of business managers were enthused by this idea and have utilized their knowledge and power to achieve PEaaB´s vision: “Humans live their lives with dignity – now and for all generations to come.” The paper reminds of the reasons for PEaaB, its basic characteristics, and key issues from a business management perspective. Then it gives a brief insight into the startup phase of PEaaB and illustrates how it has contributed to climate protection until 2051. The conclusion gets back to the beginning of the 2020s and reflects on this fictional science development review. KW - Global sustainable development KW - Business management KW - Earth system science KW - Climate change KW - Management theory KW - Nachhaltigkeit KW - Klimaänderung KW - Management KW - Globalisierung Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-3150 SP - 1 EP - 27 ER - TY - RPRT A1 - Schmitt, Markus T1 - Globale Nachhaltigkeit – eine erste Annäherung N2 - Dieses Arbeitspapier bietet einen Einstieg in den Themenkomplex „globale Nachhaltigkeit“. Nach einer Definition des Begriffs Nachhaltigkeit wird der Ist-Zustand beschrieben; dies lässt den Veränderungsbedarf erkennen. Anschließend wird am Beispiel des Klimawandels verdeutlicht, wie dringend, wichtig und anspruchsvoll nachhaltige Lösungen sind. Die folgenden Abschnitte konzentrieren sich auf zwei Gruppen von Akteuren, die Unternehmen und die Wissenschaft; es werden Hinweise gegeben, wie Unternehmen den Nachhaltigkeitsanforderungen entsprechen, welche Wirtschaftsmodelle dazu passen und wie Forschung und Bildung beitragen können. KW - Nachhaltigkeit KW - Klimaänderung KW - Sustainability KW - Climate Change KW - Sustainable Business KW - Economic Models Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-3162 ER - TY - RPRT A1 - Schmitt, Markus T1 - Doughnut, Budget, Transformation – an Introduction to the Transdisciplinary Art of Global Sustainability N2 - This working paper offers an introduction to global sustainability. After a definition of sustainability the status quo is described, which shows the need for transformation. Then the example of climate change illustrates how urgently needed, important, and demanding sustainable solutions are. The following section focuses on businesses as one particular group of players; it explains how they can meet sustainability requirements and which economic models go with them. KW - Nachhaltigkeit KW - Klimaänderung KW - Wirtschaftsreform KW - Klimawandel KW - Wirtschaftmodell KW - Transformative Wissenschaft Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-3170 ER - TY - RPRT A1 - Dietl, Guido T1 - Decentralized Synchronization for Energy Efficient Wireless Sensor Networks—A Preliminary Study N2 - This research report presents a preliminary study on the use of decentralized synchronization based on pulse-coupled oscillators, also known as firefly synchronization, for energy efficient wireless sensor networks. Numerical results show that synchronity can be reached mostly in a few cycles, thus, showing that the investigated method is a good candidate to synchronize sleep modes which are mainly used to reduce power consumption of network nodes. KW - Firefly synchronization, sensor network, meshed network, energy efficiency Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-2863 ER - TY - THES A1 - Dexl, Jakob Frederik T1 - Mapping of natural learning processes for the development of neural network architectures - Implementation and comparison of approaches in the classification of radiological data sets N2 - In order to provide more transparency on convolutional neural networks (CNN) for education and research purposes this work has three main objectives: • Create CNN models based on two different architectures, which classify magnetic resonance images of the brain into normal and abnormal • Investigate these models by applying state of the art visualization techniques. For this purpose, a simple accessible Application Interface (API) for Keras sequential models will be developed. • Describe the quality of the models based on the visualizations and compare their overall classification to the human classification procedure. T2 - Abbildung natürlicher Lernprozesse für die Entwicklung neuronaler Netzarchitekturen - Implementierung und Vergleich von Ansätzen bei der Klassifizierung eines radiologischen Datensatzes KW - CNN KW - visualization KW - machine learning KW - radiology KW - image classification KW - Neuronales Netz KW - Visualisierung KW - Maschinelles Lernen KW - Radiologie Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-521 ER - TY - THES A1 - Lorentschk, Michael T1 - Benefit of a virtual reality rapid room planning application in marketing and sales of high involvement medical devices – ergonomics, user acceptance and profitability N2 - The purpose of this work is to evaluate the overall applicability of a rapid room planning tool including a virtual reality visualization mode for a room planning use case in the field of marketing and sales of high involvement medical devices, such as X-ray imaging systems. Four main aspects are identified and evaluated: ▪ The benchmark of VR applications in the field of high involvement marketing and sales, including B2B and B2C use cases. ▪ The potentially savable planning iterations and the associated costs within a room installation process, based on literature review of expert opinions in comparable fields. ▪ The degree of usability of the application, to which extent potential users can create and manipulate room layouts efficiently and without explicit training in advance – assessed in observed user tests with Philips Healthcare employees. Additionally, an employee survey was conducted. ▪ Customer acceptance regarding the concept of VR visualization and the possibly resulting improvement of visual imagination of device proportions in the anticipated environment in comparison to traditional means of product presentation (pictures, videos, real product) – assessed with healthcare professionals. The benchmark results reveal a multitude of already widely used VR applications in marketing and sales, especially factory planning is considered as a comparable high involvement use case. Subsequently, increased profitability in factory planning can be extended to medical room planning in form of increased efficiency through the reduction of iterations. The overall evaluation of the rapid room planning tool shows a high degree of usability and acceptance among test users and customers. Survey results are independent of customer proximity and age. This work concludes with recommendations for further development and the creation of additional content for the application. T2 - Benefit einer Raumplanungs-VR-Applikation in Marketing und Vertrieb von medizinischen Großgeräten - Ergonomie, Nutzerakzeptanz und Wirtschaftlichkeit KW - Virtual Reality KW - Raumplanung KW - Radiology KW - Usability KW - Virtuelle Realität KW - Smartphone KW - App KW - Radiologie Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-530 ER - TY - THES A1 - Maleta, Artur T1 - Rapid Prototyping Umgebung für VR-Umgebungen in der Medizintechnik – Konzeptionierung, Entwicklung und Test N2 - Das Ziel dieser Arbeit ist die Unterstützung der Raumeinrichtungsplanung medizinischer Behandlungsräume für die Installation technischer Medizinprodukte. Durch eine realitätsnahe Visualisierung der Raumplanung soll die Vorstellungskraft der Anwender unterstützt werden. Im Einsatzfeld soll die Kommunikaton zwischen Vertriebsmitarbeitern und Kunden begünstigt und eine Diskussionsgrundlage für unterschiedliche Varianten einer Raumplanung geschaffen werden. Dazu soll ein computergestütztes System konzipiert werden, welches die Einhaltung der Distanzvorgaben von Einrichtungsgegenständen fördert. Die Anwender sollen eine Hilfestellung bei der Verifzierung der Raumplanung erhalten und Änderungen an der Raumplanung vornehmen können. Der Fokus wird in Zusammenarbeit mit der Firma Philips Medical Systems DMC GmbH auf die Raumplanung und Einrichtung von Produkten aus dem Diagnostic X-Ray Portolio gelegt. Zwei Produkte – dabei handelt es sich um Durchleuchtungsgeräte aus der Medizintechnik – sollen bei der Raumplanung zur Auswahl verfügbar sein. Des Weiteren soll die Machbarkeit eines Rapid-Roomplaning-Ansatzes auf Basis von Mobilgeräten untersucht werden. Das System wird aus einem Smartphone mit der Erweiterung zu einem HMD (Head Mounted Display) und der Entwicklung einer Smartphone-Applikaton aufgebaut. Das bedeutet, dass der Prototyp dieser Anwendung einen Untersuchungsgegenstand für den Einsatz mobiler VR Technologie im unternehmerischen Kontext darstellen wird. Aspekte der Usability sollen einen intuitven Umgang mit dem System gewährleisten und die Implementerung von 3D-Modellen einen Eindruck über die Produkte verschaffen, indem bereitgestellte 3D-Modelle in der Smartphone-Anwendung zur Raumplanung verwendet und in einer realitätsnahen Visualisierung betrachtet werden können. KW - Virtual Reality KW - Smartphone App KW - Raumplanung KW - Virtuelle Realität KW - Smartphone KW - App KW - Radiologie Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:bvb:860-opus4-541 ER -