Refine
Labor/Institute
Keywords
- Bragg-Reflektor (5) (remove)
Year of publication
- 2021 (5) (remove)
Document Type
- Article (2)
- Part of a Book (1)
- Conference Proceeding (1)
- Other (1)
Language
- English (5)
This study demonstrates and discusses a novel approach for the fabrication and rapid prototyping of monolithic photonic platforms comprising a ridge-type waveguide with integrated sensing structures. First, the bulk injection-molded cyclic olefin copolymer substrates are micromilled in order to define the physical extension of the ridge structure. Cross-sections down to 30 × 30 µm2, exhibiting a mean surface roughness of 300 nm, are achieved with this process. Subsequently, UV radiation is used to modify the ridge structure’s refractive index, which leads to the formation of an optical waveguide. By employing a phase mask, it is possible to equip the photonic platform with a Bragg grating suitable for temperature measurements with a sensitivity of −5.1 pm K-1. Furthermore, an integrated Fabry-Pérot cavity, generated during the micromilling step as well, enables refractive index measurements with sensitivities up to 1154 nm RIU-1.
This contribution demonstrates and discusses electrically tunable polymer planar Bragg gratings based on bulk cyclic olefin copolymers. A lithographic single-writing-step method and femtosecond laser reductive sintering of copper(II) oxide nanoparticles are subsequently employed in order to generate buried photonic structures and copper conducting paths on top of the polymer substrate. This way, the necessary number of process steps for fabricating a planar polymer-based electro-optical device is greatly reduced. The response of a fully electrified grating structure follows temperature changes, induced by the copper conducting path, with sensitivities up to −31 pm K−1. Dilatometric measurements show that the specimen's behavior is correlated to the situationally reduced thermal expansion of the bulk polymer substrate. In consequence, the tuning response of the photonic platform follows a second order polynomial, whereas a direct current of 30 mA, which correlates to a power consumption of 18.3 mW, leads to a local temperature increase and a residual Bragg wavelength shift of 19.6 K and −547 pm, respectively. Moreover, the outstanding flexibility of the proposed fabrication concept is underlined by demonstrating alternative conducting path geometries, whereas one of the additional designs is adapted to control the spectral width of the Bragg grating's reflection peak.
This cover image outlines the fabrication method of a polymer planar Bragg grating electrified via femtosecond laser reductive sintering of CuO nanoparticles (see article number 2002203 by Stefan Kefer and co-workers). Based on this sophisticated methodology, bulk cyclic olefin copolymer substrates can be equipped with integrated photonic structures comprising a waveguide as well as a Bragg grating. Its reflective characteristics can be efficiently tuned by means of the subsequently generated Cu conducting path, whereas the applied femtosecond laser process enables an almost limitless degree of freedom towards conducting path geometries.
This study demonstrates mobile load monitoring of a composite bicycle component using an application-
customized polymer planar Bragg grating sensor, evaluated by a mobile interrogation unit. After a referencing procedure, the mechanical load of a seat post is monitored while cycling through a test track.