Refine
Labor/Institute
- BIOMEMS Lab (2)
Keywords
Document Type
- Article (2)
- Conference Proceeding (1)
Language
- English (3)
Reviewed
- ja (2)
In vitro platform for acoustic and electrophysiological investigations of ultrasound stimulation
(2017)
Since the first time discovered that ultrasound can influence neuronal activity - more than half a century ago - a lot of progress has been made in this field. The possibilities of ultrasound for neuromodulation have been demonstrated in many experiments such as in vivo stimulation of rodent brain or of human cochlear, Further, in vitro experiments with hippocampal slices and other cell types have been performed as well.
Air-coupled ultrasonic transducers are widely used in non-destructive testing, acoustical sonar systems, and biomedical imaging. These applications require transducers that operate effectively across a broad acoustic frequency spectrum, offer adaptable geometric designs, and increasingly incorporate eco-friendly materials. In this work, we present a monolithic, 3D-printed air-coupled ultrasonic transducer based on ferroelectrets (FEs) and fabricated from biocompatible polylactic acid (PLA). We evaluated the transducer’s acoustical performance by measuring the surface velocity of its active area using laser Doppler vibrometry and assessed its robustness during continuous operation over a 19-day period. Additionally, we measured the sound pressure level (SPL) and wideband characteristics in an anechoic chamber across excitation frequencies from 1kHz to 100kHz. At a resonance frequency of 33kHz, our transducer achieved an SPL of 94.3dB and surface velocities up to 37mm/s. The measured bandwidth of 65.2kHz at the -6dB threshold corresponds to a fractional bandwidth of 189%. The observed exponential decay of the surface velocity, stabilizing at 15% of its initial amplitude, aligns with the isothermal surface potential decay typically observed in FE films made from PLA. These results demonstrate the effectiveness of the transducer, which features an adaptable backplate for tuning acoustic properties. The low-cost transducer, manufactured from biocompatible PLA, is particularly suited for imaging and biomedical applications furthering green electronics.
In recent years, the demand for sustainable and degradable materials and electronic devices has increased significantly.
Among a range of biodegradable polymers, poly(lactic acid) (PLA) is a good alternative to conventional petrol-based polymers because of its attractive mechanical properties and its easy processability. Recently, PLA has also been described as a promising dielectric material with piezoelectric and electret properties. We expect that PLA—after further optimization— will play an important role as a material for environmentally friendly sensors in the future, where first applications such as air filters and pressure sensors have already been proposed. However, degradation under normal ambient conditions is very slow, and an accelerated and controllable degradation process is highly desirable for any type of PLA-based sensors.
Enzymatic hydrolysis with embedded enzymes has been proposed as an approach to accelerate and control degradation. In this work, we investigate the properties of PLA in terms of dielectric and mechanical properties with a focus on its ability to store charges after the enzyme proteinase K (Trit. album) has been incorporated. Results reveal that proteinase K has a positive effect on the charge stability of solvent-cast PLA electrets after complete evaporation of the solvent. Furthermore, we observed a concentration-dependent acceleration of mass loss in a Tris-HCl buffer. A fast degradation within only one day occurred at a concentration of 6 wt% proteinase K.