Refine
Keywords
- iridium (3) (remove)
Document Type
- Conference Proceeding (2)
- Other (1)
Language
- English (3)
Metallic coatings made of precious metals (e.g. Ir, Pt or Au) with high atomic number Z have been traditionally employed at grazing incidence for X-rays reflection and focalization. These materials offer a range of reflection extended to higher energies, but also present a series of absorption edges, which limit the reflectivity in the 2-4 keV band and below. Therefore the search for alternative coatings, able to improve the reflection in the soft energy range, is particularly relevant for the development of future telescopes, like ATHENA (ESA), Lynx (NASA) and eXTP (CAS). Low-Z overcoatings (e.g. carbon or B4C), applied on top of the high-Z metallic layer, can enhance the reflectivity in the softer band (mainly below 2 keV), but conventional deposition methods for these materials are not easily compatible with some of the mainstream technologies for mirror fabrication (notably, the silicon pore optics that will be used for the ATHENA X-ray mission which is being implemented by ESA). In this work we discuss novel solutions (carbon-like overcoatings realized by dip coating or vapor phase deposition), which can be particularly convenient for the application to ATHENA and to future telescopes.
X-ray telescopes usually operate in space and are quite different from astronomical telescopes for visible light. For normal angles of incidence, optical light is reflected on the mirror surface, whereas X-rays are either transmitted or absorbed. However, also high reflectivity X-rays mirrors are possible, when the incident rays direction is almost parallel to the mirror surface. Such grazing incidence mirrors are usually coated with thin layers of precious metals like iridium, gold or platinum, as this result in high X-ray reflectivity. These noble metals offer a wide range of reflection up to high photon energies, but, due to a series of absorption edges, have low reflectivity in the 2 - 4 keV band and below. This contribution presents the development of innovative material combinations based on thin layers of iridium and chromium, followed by an additional layer of carbon-based materials. We also discuss corresponding production methods (like dip coating) for enhanced reflectivity mirror coatings of future X-ray telescopes.
Low density overcoatings (mainly based on materials containing Carbon) onto usual high-density coatings (based i.e. on materials like e.g. like Ir, Au or Pt) have been proposed since many years ago in order to enhance the X- ray reflectivity at low energy (between 0.5 and 4 keV) of X-ray astronomical optics. The trick is to make use of the total reflection from the thin low-density material (which does not suffer much the photoelectric absorption) at low X-ray energies; the reflection of photons at higher energies (< 4 keV) occurs thanks to the much denser material under the overcoating. For several future projects, like e.g. ATHENA, LYNX and eXTP, it is foreseen the use of low-density overcoatings that will importantly increase the effective area at low X-ray energies. In this paper we will introduce the use of overcoatings based on materials different from the usual ones considered so far like C, B4C and SiC. In particular, we will discuss about a novel approach based on the use of thin layer of a Carbon-like materials deposited using a dip coating method. A possible combination with an intermediate thin layer of Chromium deposited e.g. via sputtering onto the usual high density material (Ir, Au or Pt) before the application of the Carbon-like material is also considered in the study, because it can further greatly enhance the soft X-ray effective area of future X-ray telescopes.