Refine
Labor/Institute
Keywords
- mirror (3) (remove)
Document Type
- Conference Proceeding (2)
- Other (1)
Language
- English (3)
High reflectivity grazing incidence mirrors of astronomical X-ray telescopes are usually coated with thin layers of iridium, gold, or platinum. Due to a series of absorption edges, these noble metals have low reflectivity in the 2 - 4 keV band. We present the development of innovative material combinations using chromium and an additional layer of polydopamine for enhanced reflectivity X-ray coatings.
X-ray telescopes usually operate in space and are quite different from astronomical telescopes for visible light. For normal angles of incidence, optical light is reflected on the mirror surface, whereas X-rays are either transmitted or absorbed. However, also high reflectivity X-rays mirrors are possible, when the incident rays direction is almost parallel to the mirror surface. Such grazing incidence mirrors are usually coated with thin layers of precious metals like iridium, gold or platinum, as this result in high X-ray reflectivity. These noble metals offer a wide range of reflection up to high photon energies, but, due to a series of absorption edges, have low reflectivity in the 2 - 4 keV band and below. This contribution presents the development of innovative material combinations based on thin layers of iridium and chromium, followed by an additional layer of carbon-based materials. We also discuss corresponding production methods (like dip coating) for enhanced reflectivity mirror coatings of future X-ray telescopes.
Upgrade of a laboratory X-ray diffractometer to extend its operating range towards soft energies
(2022)
The optical properties of X-ray mirror samples are commonly measured using diffractometers based on laboratory sources; like the Bede D1 diffractometer operating at INAF-OAB. This instrument can generate a collimated X-ray beam up to 60 keV, even though the most interesting energy region for x-ray astronomy applications is usually below 10 keV. In the softest part of this range (below 6 keV), high X-ray absorption in air hinders a full and precise characterization of optical components. In this work, we present an upgrade of the Bede D1 diffractometer that extends the operative range of the
instrument below 6 keV; this is done by maximizing the flux at lowest energies and by reducing absorption by means of a helium-rich atmosphere.
The upgraded instrument will be used for the tests of X-ray mirrors with innovative soft X-ray coatings, with potential application to the next generation X-ray telescopes (such as ATHENA and eXTP).