Refine
Labor/Institute
Keywords
- Femtosekundenlaser (17)
- Bragg-Reflektor (7)
- Laserschweißen (4)
- Polymethylmethacrylate (3)
- Ultrakurzzeitlaser (3)
- Optischer Sensor (2)
- cyclic olefin copolymers (2)
- integrated photonics (2)
- Bragg Grating (1)
- Bragg grating (1)
Year of publication
Document Type
- Article (21)
- Conference Proceeding (5)
- Other (1)
Language
- English (27)
Reviewed
- ja (1)
Microneedle-based microfluidic systems have a great potential to become well-accepted medical devices for simple, accurate, and painless drug delivery and lab-on-a-chip diagnostics. In this work, we report on a novel hybrid approach combining femtosecond direct laser written microneedles with femtosecond laser generated microfluidic channels providing an important step towards versatile medical point-of-care systems. Hollow microneedle arrays are fabricated by a laser system designed for two-photon polymerization applications. Compression tests of two different types of truncated cone-shaped microneedle arrays prepared from OrmoComp® give information about the microneedle mechanical strength, and the results are compared to skin insertion forces. Three-dimensional microchannels are directly created inside PMMA bulk material by an ultrashort pulse laser system with vertical channels having adjustable cross-sectional areas, which allow attaching of microneedles to the microfluidic system. A comprehensive parameter study varying pulse duration and repetition rate is performed on two-photon polymerization to identify an optimal laser power range for fabricating microneedles using the same pulse duration and repetition rate as for microchannels. This addresses the advantage of a single laser system process that overcomes complex fabrication methods. A proof of concept flow test with a rhodamine B dye solution in distilled water demonstrates that the combination of microneedles and microchannels qualifies for microfluidic injection and extraction applications.
Control of femtosecond laser generated microfluidic channels inside poly (methyl methacrylate)
(2018)
In this study, the authors report on femtosecond laser direct generation of microchannels inside poly(methyl methacrylate) with variable dimensions ranging from a channel height of 20 to 350 μm and an aspect ratio down to 1.2. Focused ultrashort laser pulses are used to trigger a material modification in the focal area which can be selectively opened by a subsequent annealing process. A 3D microchannel architecture can easily be realized by moving the specimen using motorized stages, allowing freely chosen complex shaped channel layouts. While the laser wavelength is identified as one of the main parameters determining process effectiveness, another core of this study is the variation of channel dimensions by the numerical aperture of the applied objective to focus the laser. The authors find that both size and shape of the modified region and the resulting microchannel can be controlled by altering the numerical aperture.
We present an experimental study on fiber laser micromachining of 4H-SiC semiconductor. In particular, we optimize the process time for percussion drilling of 440 µm and 330 µm thick wafers with a minimum drilling time of, eg, 7.5 ms being achieved for 330 µm thick wafers. The drilled holes are characterized by a low taper, a high circularity and entry diameters of about 60 µm. For laser cutting, effective cutting speeds of 2 mm/s and 0.63 mm/s are obtained for 330 µm and 440 µm wafer thickness, respectively, with the cut kerf width being 65 µm. Both processes are associated with a good quality that is characterized by no chipping and cracks. The capability of the fiber laser based micromachining process is highlighted by cutting complex micrometer scale inner and outer contours into partially metallized SiC wafers with high quality.
The authors report on the laser generation of three-dimensional microchannel architectures with fundamentally unlimited channel length by focused 514 nm femtosecond laser pulses inside polymethylmethacrylate bulk material. The three-dimensional channel layout is implemented by moving the specimen using three-dimensional motorized stages, allowing freely chosen complex shaped channel architectures. Based on nonlinear absorption of high intensities around the focal volume, a material modification, including a refractive-index shift is triggered. After laser exposure, the channel is created by a gaseous degradation of exposed areas during an annealing process. Cross section and aspect ratio of thus generated microchannels are strongly influenced by the numerical aperture of the applied objective. To obtain a circular cross-sectional shape, high focusing objectives are necessary. In this report, the authors improve the existing setup by using an elliptical input beam, transforming the intensity distribution of the focal area in the propagation direction to a circular shape even for low and medium numerical aperture focusing objectives and therefore avoiding a small working distance as a limiting factor for processing depth. The elliptical input beam is obtained by insertion of a slit mask in front of the focusing objective. The ellipticity of the incident beam defines the aspect ratio of the generated microchannels. Furthermore, the size of internal microchannels is adjustable by varying laser and annealing process parameters.
We report on laser generation of microchannels by focused femtosecond laser pulses inside PMMA bulk material. This process enables direct fabrication of three dimensional microfluidic channel architectures with generally unlimited channel length. Based on nonlinear ultrashort pulse laser absorption of high intensities around the focal volume, a material modification including a refractive index shift is triggered. After laser exposure the channel is created by a gaseous degradation of exposed areas during an annealing process. The 3D channel layout can easily be realized by moving the specimen using 3D motorized stages, allowing freely chosen complex shaped channel architectures. In this report, the creation of inner lying vertical microchannels is examined. In addition to previously shown horizontal channel architectures vertical channels are necessary to fulfill the definition of an internal three-dimensional microfluidic structure and to create interconnections in multilevel lab on chip devices. The cross section and geometry of vertical channels are strongly influenced by laser parameters such as pulse duration, laser power and writing speed. The influence of these process parameters on the channels diameter is determined and parameters are optimized regarding a controllable, stable and reproducible process. The functionality of vertical microchannels as an interconnection between multilayer microfluidic devices is demonstrated using a Rhodamine B solution.
Lab-on-chip systems are based on components to transport, mix, separate and analyse small volumes of different fluids. The consecutive integration of more complex functions into a single and compact chip demands on multilayer systems. As the classical production using a stacking and joining of single processed layers is elaborate and limited in terms of multilayer structures, an uprising trend to fabricate those devices is the internal, three dimensional processing of transparent substrates by using ultrashort laser pulses. In this study, we report on the generation of internal hollow architectures created by focused 514nm femtosecond laser pulses inside optical polymer bulk materials of different polymers. The three-dimensional channel layout is implemented by moving the sample using three-dimensional motorized stages, allowing arbitrary complex shaped internal channel architectures. Size and cross sectional shape of a single internal generated microchannel are determined by the intensity distribution of the focal voxel. In particular, we show a comprehensive parameter study to improve this laser process with respect to a higher processing speed and stability.
In this contribution, we report on the generation of internal microchannels with basically unlimited channel length inside of PMMA bulk material by femtosecond laser. A precisely controllable and stable circular channel cross section is obtained by using a spatial light modulator to compensate the writing depth depending spherical aberration. Furthermore, the generation of a rotatable elliptical input beam by adaptive optics ensures a fitting of the beam shaping to the writing direction. In this study, we report on both, the effect of the ellipticity of the input beam and the effect of a correction of the spherical aberration on the circularity of the resulting internal microchannels. Moreover, we demonstrate the application of this writing technique by creating microfluidic testing structures inside of a transparent standard polymer.
We report on the joining of two different transparent thermoplastic polymers using infrared femtosecond laser pulses. Solely being based on nonlinear absorption, the developed micro-welding process for cyclo-olefin copolymers and polycarbonate does not require any intermediate absorbing layers or any surface pre-processing of the welding partners. In addition, it circumvents any heat damages at the outer surfaces of the welding partners. Femtosecond laser welding of cyclo-olefin copolymers is improved by increasing the numerical aperture of the focusing setup resulting in a wider and more homogenous welding cross-section. Welding results are classified by shear strength and fracture modes are analyzed using scanning electron microscopy. Furthermore, we demonstrate, to the best of our knowledge, first results of ultrashort pulse laser welding of transparent polycarbonate, one of the most used transparent polymers. In view of an optimized and stable micro-welding process, we study the influence of laser power and focal position on welding results. The application of ultrashort pulse laser welding for Lab-on-chip fabrication technologies is demonstrated by sealing an ultrashort pulse laser ablated microfluidic device based on a transparent polymer substrate.
Microfluidic lab on chip systems require components to transport, mix, separate and analyse small volumes of different fluids. In this study, we report on the laser generation of internal hollow architectures created by focused 514 nm femtosecond laser pulses inside PMMA bulk material. Size and cross-sectional shape of a single internal generated microchannel are determined by the intensity distribution inside the focal voxel and can be controlled either by the numerical aperture of the focusing objective or by laser beam shaping. As both approaches are practically limited with respect to the realizable cross-sectional shapes, we present a process based on an internal hatching to expand the achievable channel cross-sections and thereby enable the possibility to create complex 3D shaped internal structures. This process is applied to create fully internal functional microfluidic elements such as mixers which are part of most polymer lab-on-chip systems.