Refine
Labor/Institute
Keywords
- Femtosekundenlaser (5)
- Bragg-Reflektor (3)
- Saphir (2)
- femtosecond laser (2)
- micromachining (2)
- sapphire (2)
- Lichtwellenleiter (1)
- Wellenleiter (1)
- ablation threshold (1)
- laser lathe (1)
Document Type
- Article (5)
- Conference Proceeding (1)
Reviewed
- ja (1)
In this study, we report on the integration of microfluidic channels and optical components by focusing femtosecond laser radiation inside transparent cyclic olefin copolymer (COC) bulk material. An internal localized material modification is triggered based on nonlinear absorption of the laser radiation's high intensities inside the focal volume. The size and shape of the three-dimensional internal modification are controlled by using an adaptive beam shaping setup. The irradiated areas show a positive refractive index shift and can be used as Type I internal optical waveguides. Furthermore, precise control of the spatial pulse-to-pulse distance in combination with a suitable beam profile enables the integration of functional photonic elements, e.g., Bragg gratings, into the waveguide. Thus, it also enables the generation of integrated photonic sensors. In addition, internal fs laser-induced modifications are characterized by a lower thermal stability as compared to the pristine polymer material. By performing a post-annealing process step, internal hollow microstructures are created by gaseous degradation of the exposed areas. Circular microchannels can be generated in a deliberately chosen layout by employing motorized 3D stages. In comparison to etching-based fabrication methods the proposed technology facilitates unlimited channel lengths, as it omits restrictions arising from an etching selectivity and duration. Altogether, this contribution paves the way towards the fabrication of internal three-dimensional optofluidic devices, equipped with a photonic sensor. In contrast, microfluidic and photonic structures are both created by femtosecond laser direct writing inside of transparent polymers.
We report on a femtosecond laser based fabrication technique that enables simultaneous single-step generation of optical waveguides and Bragg gratings inside bulk cyclic olefin copolymers. Due to the nonlinear absorption of focused and spatially modulated laser radiation with a wavelength of 514 nm and a pulse duration of 450 fs, a modification concluding a refractive index shift increase inside the substrate can be achieved. A sophisticated characterization of the generated waveguides by means of an elaborate cut-back method reveals a maximum attenuation of 3.2 dB/cm. Additionally, a Mach-Zehnder interferometer is used to examine the waveguide’s refractive index profile. The integrated Bragg grating structures exhibit reflectivities up to 95 % and a spectral full width at half maximum of 288 pm, at a Bragg wavelength of 1582 nm, whereas the grating period can be deliberately chosen by adapting the fabrication parameters. Thus, due to its increased flexibility and the resulting dispensability of cost-intensive phase masks, this method constitutes an especially promising fabrication process for polymer Bragg gratings inside of bulk materials.
We report on femtosecond laser direct writing of electrically conductive copper structures on transparent cyclic olefin copolymer based planar optical chips. The process is based on a laser-induced reduction of CuO nanoparticles dissolved in a water-soluble resin. Thus generated conductive copper structures are characterized with respect to their chemical composition and electrical resistivity. In addition, the application of ultrashort laser pulses enables a hybrid micromachining approach comprising ablation of polymer substrates and the fabrication of copper patterns in a single laser processing setup. A possible electro-optical application of this approach is demonstrated by employing the copper structures as an electro-thermal microheater in combination with a polymer planar optical Bragg grating sensor. This, in turn, highlights the potential of generating copious micro-opto-electro-mechanical polymer structures for numerous sensing applications ranging from Lab-on-Chip to environmental applications using the presented hybrid micromachining approach.
While sapphire is one of the most durable materials, its properties entail that high-precision machining, especially in the sub-millimeter regime, is still challenging. This contribution demonstrates and discusses novel femtosecond laser-based micromachining approaches for the fabrication of rotational-symmetric sapphire workpieces, specifically the generation of optical fibers by means of laser lathe of sapphire rods and the practical realization of windmill fibers. In addition, volume refractive index modification in planar sapphire substrates is presented to induce photonic crystal waveguides. The micromachined structures are comprehensively examined with respect to geometric fidelity, surface roughness, refractive index modification, and potential optical waveguiding properties. All micromachining approaches are done by means of frequency-doubled or frequency-tripled femtosecond laser radiation. Different laser optical setups including laser scanning head, spatial beam profilers including a spatial light modulator and axial rotatory movement of the specimen are employed for micro structuring and in-depth refractive index modifications. In particular for laser lathe, a sophisticated scanning pattern, in combination with an incremental axial rotatory movement of the specimen, allows for the precise diameter reduction of sapphire rods with 250 µm diameter to fibers with outer diameters of 25 µm. By supporting the workpiece with a V-groove fixture, multi-mode fibers with lengths up to 20 cm can be processed with an average surface roughness of 250 nm. Additionally, an adapted ablation scanning sequence enables the first practical demonstration of sapphire windmill fibers. Furthermore, using a spatial light modulator allows for the adaption of the laser propagation properties as to enable volume refractive index modifications with free-form arrangement. Hexagonal patterns of refractive index modifications surrounding a pristine waveguide core are fabricated and single-mode waveguiding at 1550 nm is verified. Finally, the possibility of integrating Bragg gratings into this photonic waveguide type is demonstrated
Sapphire is a robust and wear-resistant material. However, efficient and high-quality micromachining is still a challenge. This contribution demonstrates and discusses two novels, previously unreported approaches for femtosecond laser-based micromachining of rotational-symmetric sapphire workpieces, whereas both methods are in principal hybrids of laser scanning and laser turning or laser lathe. The first process, a combination of a sequential linear hatch pattern in parallel to the workpiece’s main axis with a defined incremental workpiece rotation, enables the fabrication of sapphire fibers with diameters of 50 µm over a length of 4.5 mm. Furthermore, sapphire specimens with a diameter of 25 µm over a length of 2 mm can be fabricated whereas an arithmetical mean height, i.e., Sa parameter, of 281 nm is achieved. The second process combines a constant workpiece feed and orthogonal scanning with incremental workpiece rotation. With this approach, workpiece length limitations of the first process are overcome and sapphire fibers with an average diameter of 90 µm over a length of 20 cm are manufactured. Again, the sapphire specimen exhibits a comparable surface roughness with an average Sa value of 249 nm over 20 cm. Based on the obtained results, the proposed manufacturing method paves an innovative and flexible, all laser-based way towards the fabrication or microstructuring of sapphire optical devices, and thus, a promising alternative to chemical processes.
We demonstrate and discuss the integration of Bragg gratings in aerosol-jetted polymer optical waveguides, produced in the optical assembly and connection technology for component-integrated bus systems (OPTAVER) process. By using a femtosecond laser and adaptive beam shaping, an elliptical focal voxel generates different types of single pulse modification by nonlinear absorption in the waveguide material, which are arranged periodically to form Bragg gratings. Integration of a single grating structure or, alternatively, an array of Bragg grating structures in the multimode waveguide yields a pronounced reflection signal with typical multimodal properties, i.e., a number of reflection peaks with non-Gaussian shapes. However, the main wavelength of reflection, located around 1555 nm, is evaluable by means of an appropriate smoothing algorithm. When loaded by mechanical bending, a pronounced Bragg wavelength shift of this reflected peak up to 160 pm is detected. This demonstrates that the additively manufactured waveguides can be used not only for signal transmission but also as a sensor.