Refine
Labor/Institute
Keywords
- Bragg-Reflektor (15)
- Sensor (7)
- Biokraftstoff (2)
- Biosensor (2)
- sensor detection (2)
- Alginate (1)
- Array (1)
- Biologisch abbaubarer Kunststoff (1)
- Biomolekül (1)
- Bragg gratings , Gratings , Optical waveguides , Temperature sensors , Substrates (1)
- Dünne Schicht (1)
- Gold (1)
- Graphene (1)
- Hohlleiter (1)
- Hydrogel (1)
- Microelectrodes (1)
- Mikroelektrode (1)
- Neural Interface (1)
- Neural Recording (1)
- Optischer Sensor (1)
- Stimulation (1)
- Wellenleiter (1)
- biosensor (1)
- enzyme free glucose sensor (1)
- glucose (1)
- surface modification (1)
- ultrathin gold (1)
- waveguide fabrication (1)
Year of publication
Document Type
- Conference Proceeding (15)
- Article (7)
- Doctoral Thesis (1)
Reviewed
- ja (1)
This contribution reviews recent advancements, current research and possible applications of polymer planar Bragg grating (PPBG) sensors with a focus on the utilization of cyclic olefin copolymer (COC) substrates. COC-PPBGs can be handled and fabricated efficiently by employing a single writing step procedure which features simultaneous generation of waveguide and Bragg grating structure within an injection molded substrate. The resulting photonic structures exhibit an attenuation as low as 1.2 dB cm-1 and a reflectivity up to 99 %. The potential of COC-PPBGs for high-temperature applications is proven by demonstrating temperature measurements up to 160 °C. Moreover, it is possible to employ single PPBGs for multidimensional stress and strain sensing or even three-dimensional shape reconstruction. Due to their excellent properties, it is feasible to integrate COC-PPBGs into commercial-grade carbon fiber reinforced polymer workpieces for structural health monitoring. Furthermore, utilization of appropriate coatings enables functionalization of PPBGs for refractive index sensing and thus biochemical applications. Beside the fabrication and characterization of COC-based PPBGs, this contribution exemplifies and reviews such applications.
Evanescent wave planar bragg grating sensor for real-time detection of unlabelled biomolecules
(2011)
In recent years, the demand for sustainable and degradable materials and electronic devices has increased significantly.
Among a range of biodegradable polymers, poly(lactic acid) (PLA) is a good alternative to conventional petrol-based polymers because of its attractive mechanical properties and its easy processability. Recently, PLA has also been described as a promising dielectric material with piezoelectric and electret properties. We expect that PLA—after further optimization— will play an important role as a material for environmentally friendly sensors in the future, where first applications such as air filters and pressure sensors have already been proposed. However, degradation under normal ambient conditions is very slow, and an accelerated and controllable degradation process is highly desirable for any type of PLA-based sensors.
Enzymatic hydrolysis with embedded enzymes has been proposed as an approach to accelerate and control degradation. In this work, we investigate the properties of PLA in terms of dielectric and mechanical properties with a focus on its ability to store charges after the enzyme proteinase K (Trit. album) has been incorporated. Results reveal that proteinase K has a positive effect on the charge stability of solvent-cast PLA electrets after complete evaporation of the solvent. Furthermore, we observed a concentration-dependent acceleration of mass loss in a Tris-HCl buffer. A fast degradation within only one day occurred at a concentration of 6 wt% proteinase K.
Graphene is a promising material both as a coating for existing neural electrodes as well as for transparent electrodes made exclusively from graphene. We studied graphene‐based microelectrodes by investigating their recording and stimulation properties in order to evaluate their suitability for neuronal implants. In this work, we compare three different electrode material compositions. Microelectrode arrays (MEA) with an electrode size of about 700 μm2 were prepared of gold, graphene on gold, and plain graphene on glass substrate. In order to reduce polymer contamination during graphene transfer, we employed a polymer‐free transfer and lift‐off process. Impedance studies revealed a value of 2.3 MΩ at 1 kHz for plain, and 0.88 MΩ for graphene on gold. Neuronal recording experiments showed a sufficient SNR for both graphene‐based materials and a stable impedance, unaffected by surface degradation metal electrodes are known for. Stimulation measurements yielded a charge injection capacity of 0.15 mC/cm2 using biphasic pulses of 1 ms and 1 μA transparent graphene electrodes. Cyclic voltammetry revealed a large voltage range of −1.4 V to +1.6 V before water electrolysis occurs. Graphene‐coated gold microelectrodes show enhanced recording properties, whereas plain graphene electrodes might be better suited for stimulation applications.